8bf601a368
jtag_scan: Continued reworking jtag_scan() and switched jtag_dev_count to a uint32_t as it can't be negative
2022-07-30 18:00:08 -07:00
190c45b450
jtag_scan: Reworked IR length and device count scanning when irlens is not given
2022-07-30 18:00:08 -07:00
9f35763199
jtag_scan: Reworked and cleaned up how scan works when irlens is specified
2022-07-30 18:00:08 -07:00
b258730499
jtag_scan: Turned the JTAG conformance hard errors into warnings
2022-07-30 18:00:08 -07:00
c488a15982
command: Improved the messages emitted out of the Trace/SWO command
2022-07-30 17:47:53 -07:00
fb579e5929
command: Added some output for cmd_morse when there is no message set
2022-07-30 17:47:53 -07:00
e013b48139
command: Cleaned up cmd_debug_bmp
2022-07-30 17:47:53 -07:00
a467568325
command: Cleaned up in cmd_traceswo
2022-07-30 17:47:53 -07:00
65c58998b4
command: Cleaned up and refactored cmd_rtt
2022-07-30 17:47:53 -07:00
39611b8b4f
command: Cleaned up in cmd_target_power
2022-07-30 17:47:53 -07:00
e8610d9ca2
command: Fixed a clang-tidy warning in cmd_halt_timeout
2022-07-30 17:47:53 -07:00
bffd3d3d14
command: Cleaned up cmd_connect_reset
2022-07-30 17:47:53 -07:00
567fc631f0
command: Refactored display_target()
2022-07-30 17:47:53 -07:00
50457bac13
command: Cleaned up in cmd_frequency and added some robustness
2022-07-30 17:47:53 -07:00
35f071c22e
command: Cleaned up in cmd_jtag_scan
2022-07-30 17:47:53 -07:00
5d0e36e668
command: Cleaned up and refactored cmd_help
2022-07-30 17:47:53 -07:00
f33744aa6a
command: Fixed a pile of type confusion in the command function arguments
2022-07-30 17:47:53 -07:00
823634e609
command: Refactored and cleaned up command_process
2022-07-30 17:47:53 -07:00
68a6a7b85e
command: Run clang-format across the code
2022-07-30 17:47:53 -07:00
f85265438c
command: Cleaned up parse_enable_or_disable
2022-07-30 17:47:53 -07:00
c2ce4430c8
command: Implemented a new command for performing intentional TDI-low resets
2022-07-30 16:59:38 -07:00
84c004281d
lpc11xx: Further cleanup in lpc11xx_add_flash
2022-07-30 16:59:38 -07:00
af86d50bc2
lpc11xx: Moved the readuid command to where it makes more sense
2022-07-30 16:59:38 -07:00
3d1933a5a0
lpc11xx: Run clang-format across the code
2022-07-30 16:59:38 -07:00
a9fff1e8a6
adiv5: Tidied up in adiv5_component_probe()
2022-07-30 16:43:43 -07:00
ce37d4e833
adiv5: Fix some nomenclature in adiv5_dp_init()
2022-07-30 16:43:43 -07:00
733d8ddc19
adiv5: Fix the invalid AP handling loop so that we don't stop early and bail out before time.
...
This improves target detection reliability.
2022-07-30 16:43:43 -07:00
1ea9641ada
hosted/remote_jtagtap: Refactored remote_jtagtap_init and cleaned up
2022-07-30 16:26:04 -07:00
02b979d382
jtagtap: Added support for configurable TAP idle cycles ready for RISC-V support
2022-07-30 16:26:04 -07:00
0f0435a7c1
hosted/remote_jtagtap: Fixed the debug error string in jtagtap_tdi_tdo_seq
2022-07-30 16:26:04 -07:00
d0faab957a
hosted/remote_jtagtap: Refactored jtagtap_reset and cleaned up
2022-07-30 16:26:04 -07:00
5876c7674b
hosted/remote_jtagtap: Refactored jtagtap_tms_seq and cleaned up
2022-07-30 16:26:04 -07:00
267dabacb1
hosted/remote_jtagtap: Refactored jtagtap_tdi_tdo_seq and cleaned up
2022-07-30 16:26:04 -07:00
8177e3c723
hosted/remote_jtagtap: Refactored jtagtap_cycle and cleaned up
2022-07-30 16:26:04 -07:00
088eb6f01b
hosted/remote_jtagtap: Refactored jtagtap_next and cleaned up
2022-07-30 16:26:04 -07:00
7b5121c970
hosted/remote_jtagtap: reformatted with clang-format
2022-07-30 16:26:04 -07:00
f02304dfdb
hosted/remote_jtagtap: Implemented support for jtagtap_cycle
2022-07-30 16:26:04 -07:00
2bfd84d1b2
remote: Implemented support for using the new jtagtap_cycle call
2022-07-30 16:26:04 -07:00
1b39173780
remote: Fixed several clang-tidy warnings caused by bad (reserved) function naming
2022-07-30 16:26:04 -07:00
deadf9a78d
jtagtap: Implemented jtagtap_cycle for running extra clock cycles on the bus when needed
2022-07-30 16:26:04 -07:00
5e9a974c42
Fixed compatibility issues with CH32F1 target driver and other STM32F103 clones.
2022-07-30 09:57:28 +01:00
84ffdd3b21
fix: Add nop instruction for timing purpose
...
Adding a nop instruction in the no_delay TMS sequence routine fixes timing on the f4discovery platform
2022-07-30 02:49:56 +01:00
4d64edad7a
fix: Use standard macros for debug message formating
2022-07-29 21:22:17 +01:00
57fec4d0b6
adiv5: Cleaned up a couple of the debug prints
2022-07-29 21:22:17 +01:00
7c14b62419
target: fix probing for lpc1343
2022-07-26 05:14:30 +01:00
bf30580330
target/adiv5: add missing include in hosted build
...
Signed-off-by: Rafael Silva <perigoso@riseup.net>
2022-07-26 05:08:10 +01:00
8b5206fb8d
target: add weak aliasing to allow disabling targets
...
Signed-off-by: Rafael Silva <perigoso@riseup.net>
2022-07-26 05:08:10 +01:00
6f81cb6a68
adiv5: Removed an extraneous pair of perens as they suppress desirable warnings
2022-07-25 18:28:57 +01:00
3592658a26
adiv5: Cleaned up the loop in adiv5_ap_read_id
2022-07-25 18:28:57 +01:00
bb3e74062e
adiv5: Fixed the naming of a timeout in cortexm_prepare
2022-07-25 18:28:57 +01:00
013b2dee60
target/adiv5: further cleanup
2022-07-25 18:28:57 +01:00
0942d7047a
target/adiv5: saner designer code handling and cleanup
...
Signed-off-by: Rafael Silva <rafaelsilva@ajtec.pt>
2022-07-25 18:28:57 +01:00
ce3d80528e
command: clarify hex format
...
Signed-off-by: Rafael Silva <perigoso@riseup.net>
2022-07-25 18:28:57 +01:00
d1fa50336e
target/adiv5: clang format/tidy
2022-07-25 18:28:57 +01:00
37efd257e8
gdb_main: Fixed a small DEBUG_GDB regression for vFlashErase and vFlashWrite debugging
2022-07-20 23:03:31 -07:00
e2f07b359a
gdb_main: Implemented a notification to GDB that the "process" has exited when the user runs a new bus scan while attached to a target
2022-07-20 21:37:16 -07:00
c0b5f89148
gdb_packet: Implement notification packets
2022-07-20 21:37:16 -07:00
5ae5ffb7c3
gdb_main: Add some output in the scan commands to indicate when still attached that you aren't after the command, despite what GDB thinks
2022-07-20 21:37:16 -07:00
b47ee11537
gdb_main: Implemented qfThreadInfo and qsThreadInfo for GDB 11+
2022-07-20 21:37:16 -07:00
4ba77a60ca
gdb_main: Implemented vKill as it's required for GDB 11+
2022-07-20 21:37:16 -07:00
2378e8614e
gdb_main: Cleaned up the naming in the 'g' and 'G' packet handlers
2022-07-20 21:37:16 -07:00
bc5cca7a8b
hex_utils: Cleaned up and fixed the type confusion that was going on
2022-07-20 21:37:16 -07:00
adff7651b6
gdb_main: Reply to vAttach with TID 1 because GDB 11 and 12 are terminally broken otherwise
2022-07-20 21:37:16 -07:00
0c8ebc693d
gdb_main: Implemented support for qC queries
2022-07-20 21:37:16 -07:00
00c09b4156
gdb_main: More type confusion fixes and cleanup
2022-07-20 21:37:16 -07:00
75d7dd32d1
gdb_main: Implemented H[m|M|g|G|c] packet support
2022-07-20 21:37:16 -07:00
f448368d39
gdb_packet: Done a spring pass on the types situation and cleaned things up
2022-07-20 21:37:16 -07:00
a83e024eea
general: check _DEFAULT_SOURCE and _GNU_SOURCE
...
The _DEFAULT_SOURCE and _GNU_SOURCE defines must exist in order to
enable certian glibc features. Therefore, it is common to define these
either in header files or on the command line.
Some platforms define these in their system headers. For example,
ESP-IDF defines this in their `features.h` file. This results in
a clash when blackmagic is compiled.
Check that these defines do not already exist prior to defining them.
Signed-off-by: Sean Cross <sean@xobs.io>
2022-07-20 05:18:42 +01:00
c530bd077b
misc: Switched to using C11
2022-07-18 20:59:15 -07:00
52e5357e99
swdptap: Refactored swdptap_seq_out_parity and cleaned up
2022-07-18 18:57:10 -07:00
da1038313f
swdptap: Refactored swdptap_seq_out and cleaned up
2022-07-18 18:57:10 -07:00
29baa2725c
swdptap: Further cleanup to the seq_in functions
2022-07-18 18:57:10 -07:00
caaf7837a5
swdptap: Made the cycle code a little easier to reason about
...
This doesn't actually change the resulting binary size, so worth doing
2022-07-18 18:57:10 -07:00
c267327975
swdptap: Refactored swdptap_seq_in_parity and cleaned up
2022-07-18 18:57:10 -07:00
6f0bdf5f32
swdptap: Refactored swdptap_seq_in and cleaned up
2022-07-18 18:57:10 -07:00
92c7a11cd2
swdptap: Cleaned up swdptap_turnaround
2022-07-18 18:57:10 -07:00
10d30821e5
swdptap: Cleaned up the naming and and signatures of the SWDP implementation functions
2022-07-18 18:57:10 -07:00
1a362db5ab
hosted/cmsis_dap: Naming cleanup
2022-07-18 18:57:10 -07:00
a8c2082adf
jtagtap: Const-correctness
2022-07-18 18:57:10 -07:00
9a21ef043f
hosted/ftdi_bmp: Cleaned up and fixed the signature for libftdi_buffer_write
2022-07-18 18:57:10 -07:00
d1c24b4fec
jtagtap: Cleaned up and fixed the signatures for the JTAG TAP implementation functions
2022-07-18 18:57:10 -07:00
46958ba404
dap: Cleaned up the naming and signature of the JTAG TAP DAP functions
2022-07-18 18:57:10 -07:00
96cdd17974
remote: Cleaned up the REMOTE_NEXT state
2022-07-18 18:57:10 -07:00
bdae0b2ded
jtagtap: Refactored jtagtap_tdi_seq, cleaning up and fixing naming
2022-07-18 18:57:10 -07:00
131165701c
jtagtap: Fixed more of the naming for parameters to the JTAG TAP functions
2022-07-18 18:57:10 -07:00
124b3c79d7
jtagtap: Refactored jtagtap_tdi_tdo_seq and cleaned up
2022-07-18 18:57:10 -07:00
1671b97f61
jtagtap: Reworked jtagtap_tms_seq(), saving 8 bytes and simplifying things
2022-07-18 18:57:10 -07:00
303fa15171
jtagtap: Reformatted and begun cleaning up the JTAG TAP primitives implementation
2022-07-18 18:57:10 -07:00
a6f2b52d9b
jtagtap: Reformatted and cleaned up in the header
2022-07-18 18:57:10 -07:00
7b1c4a5565
hosted/cli: Remove the `-d`/`--device` deprecation warning
...
This option is still useful to many users and there isn't a particular reason for it to be marked deprecated
2022-07-18 17:13:52 -07:00
85d24e8289
target: Implemented a command to allow erasing Flash ranges on any target
2022-07-18 17:12:13 -07:00
52cad38fac
hosted/dap: Cleaned up some of the link reset pointer maths
2022-07-18 17:10:23 -07:00
8e8ad7dbd4
hosted/cmsis_dap: Removed one-bit SWD read while SWIO is undriven + pulled up which can cause issues with certain CMSIS-DAP adaptors
...
Many thanks to @mubes for finding this and suggesting a fix
2022-07-18 17:10:23 -07:00
1b8e522e87
nrf51: Add command to enable flash protection
...
Add braces for the while loop
2022-07-15 16:57:52 +01:00
6ae846ae24
target/nrf51: Add command to enable flash protection
...
Add command `mon protect_flash` to enable flash read/write protection
2022-07-15 16:57:52 +01:00
e19c2a7298
BMDA: Make the pkg-config checks work on older gnu make versions.
...
The .SHELLSTATUS variable was added in GNU Make 4.2. Mac OS for example
ships with 3.81.
2022-07-15 12:40:09 +01:00
d0c45cf095
BMDA: Using tabs outside of a target indent causes issues.
...
It is safer to only use spaces to indent make statements outside of
targets as each line that executes any shell code will fail if it is
indented with tabs.
2022-07-15 12:40:09 +01:00
a3d3a2326f
Add include path so that libusb headers found on OSX.
2022-07-15 02:19:03 +01:00
94b62ff924
target: Fixed several clang-tidy warnings which improve readability of the code
2022-07-14 16:19:43 -07:00
bdf4dc8731
nrf51: Fixed mass erase after run then user interrupt (Ctrl + C) not working
2022-07-14 14:19:14 -07:00
5607eac812
cortexm: Cleaned up formatting, types and const-correctness in cortexm_attach
2022-07-14 14:19:14 -07:00
069f05ea4b
target/efm32: stop hiding data in driver string
...
Signed-off-by: Rafael Silva <perigoso@riseup.net>
2022-07-14 13:11:19 +01:00
096927b0b8
target/efm32: bootloader lock word handling fix
...
Signed-off-by: Rafael Silva <perigoso@riseup.net>
2022-07-14 13:11:19 +01:00
c2589bc39f
target/efm32: mass erase correctness
...
Signed-off-by: Rafael Silva <perigoso@riseup.net>
2022-07-14 13:11:19 +01:00
00dd7f145f
target/efm32: code cleanup
...
Signed-off-by: Rafael Silva <perigoso@riseup.net>
2022-07-14 13:11:19 +01:00
42d36d9d10
target/efm32: general formatting/style cleanup
...
Signed-off-by: Rafael Silva <perigoso@riseup.net>
2022-07-14 13:11:19 +01:00
018fc517a1
stm32f4: Fixes erase_mass command return error.
...
The final erase_mass command check is looking for the EOP (End of
OPeration) bit to be set. This bit is only set when the EOP interrupts
(EOPIE = 1) are enabled. We are not enabling those on the target so this
bit will never get set. As we are monitoring the BSY flag to make sure
the erase_mass operation is still ongoing and finished it is enough if
we just check the error flags.
2022-07-13 20:57:09 -07:00
ae81d1635f
hosted/cmsis_dap: Enhanced the hid_open failure output on Linux to help users narrow down the issue faster
2022-07-13 19:37:35 -07:00
0d2fb6ab79
hosted/cmsis_dap: Broken up the dap_init function into multiple parts so they're easier to understand
2022-07-13 19:37:35 -07:00
ec5ac64bdc
hosted/cmsis_dap: Done a first pass at rewriting the HID serial number logic to be unicode-safe
2022-07-13 19:37:35 -07:00
50ff4a2dbe
hosted/dap: Fixed the definiiton of dap_info, adding const-correctness
2022-07-13 19:37:35 -07:00
2f9d280e2a
hosted/dap: Cleanup and named all the enums defined in dap.h
2022-07-13 19:37:35 -07:00
1765d2afbc
hosted/dap: Reformatted the header with clang-format
2022-07-13 19:37:35 -07:00
83191bb87d
hosted: Made ASAN globally available, not only on Linux.
2022-07-13 19:37:35 -07:00
4bea5cfe81
hosted/cmsis_dap: Added a call to hid_error() when hid_open fails
2022-07-13 19:37:35 -07:00
000b05e1eb
hosted: Updated the build system documentation
2022-07-13 19:37:35 -07:00
a43fe4f5bf
hosted: Reformatted Makefile.inc to make it easier to read
2022-07-13 19:37:35 -07:00
a0b20bba84
hosted: Fixed the ASAN build configuration as it's wrong when using Clang as the compiler
2022-07-13 19:37:35 -07:00
4e50b22775
hosted: Removed the custom HIDAPI implementation for windows
...
The HIDAPI library provides a perfectly cogent implementation that includes statically linkable objects.
Their implementation is more correct and more up to date than this, so use it.
2022-07-13 19:37:35 -07:00
6d7c6c5daf
lmi: Added progress dots for mass erase to stop GDB timing out
2022-07-13 19:34:57 -07:00
d64992ade8
rp: Cleanup in how we define some of the Flash constants
2022-07-13 19:34:57 -07:00
ce94169099
stm32l0: Added some links to the reference manuals
2022-07-13 19:34:57 -07:00
a22d6e5056
stm32l0: Run clang-format across the code
2022-07-13 19:34:57 -07:00
b84f883aeb
lmi: Implemented mass erase
2022-07-13 19:34:57 -07:00
90b7362162
stm32l4: Switched to the unified mass erase command and added progress dots to stop GDB timing out
2022-07-13 19:34:57 -07:00
787d66fe95
stm32h7: Switched to the unified mass erase command, breaking up the implementation cleanly and added progress dots to stop GDB timing out
2022-07-13 19:34:57 -07:00
980a1f140c
stm32g0: Switched to the unified mass erase command, breaking out the bank erase command and added progress dots to stop GDB timing out
2022-07-13 19:34:57 -07:00
d82ad89715
stm32f4: Switched to the unified mass erase command and added progress dots to stop GDB timing out
2022-07-13 19:34:57 -07:00
2f0d35de19
samx5x: Bracket and GDB message cleanup
2022-07-13 19:34:57 -07:00
591f05d7e5
samd: Cleanup and fixed a notification TODO
2022-07-13 19:34:57 -07:00
94d5c0576b
samd/samx5x: Switched to the unified mass erase command and added progress dots to stop GDB timing out
2022-07-13 19:34:57 -07:00
e9b75ba4bc
rp: Switched to the unified mass erase command and added progress dots to stop GDB timing out
2022-07-13 19:34:57 -07:00
ffd358824f
nrf51: Switched to the unified mass erase command for the recovery target and added progress dots to stop GDB timing out
2022-07-13 19:34:57 -07:00
57d8e8f5d9
nrf51: braces cleanup in nrf51_flash_erase
2022-07-13 19:34:57 -07:00
ee694fcb75
nrf51: Switched to the unified mass erase command and added progress dots to stop GDB timing out
2022-07-13 19:34:57 -07:00
8130b62bcf
lpc546xx: Switched to the unified mass erase command for the recovery target and added progress dots to stop GDB timing out
2022-07-13 19:34:57 -07:00
9af2d2a413
lpc: Clean up part of the lpc_iap_call command wait loop
2022-07-13 19:34:57 -07:00
56ecbb3b89
lpc43xx: Switched to the unified mass erase command and added progress dots to stop GDB timing out
2022-07-13 19:34:57 -07:00
6f57cdf6ba
lpc17xx: Switched to the unified mass erase command and added progress dots to stop GDB timing out
2022-07-13 19:34:57 -07:00
ae1cb56ce0
kinetis: Switched to the unified mass erase command for the recovery target and added progress dots to stop GDB timing out
2022-07-13 19:34:57 -07:00
9d46d0c5c6
target: Refactored out the progress printer to reduce Flash usage
2022-07-13 19:34:57 -07:00
b8ca831cfb
efm32: Switched to the unified mass erase command for the recovery target and added progress dots to stop GDB timing out
2022-07-13 19:34:57 -07:00
c1758088cd
efm32: Switched to the unified mass erase command and added progress dots to stop GDB timing out
2022-07-13 19:34:57 -07:00
17c04d585e
stm32f1: Switched to the unified mass erase command and added progress dots to stop GDB timing out
2022-07-13 19:34:57 -07:00
c2d72b4825
kinetis: Switched to the unified mass erase command and added progress dots to stop GDB timing out
2022-07-13 19:34:57 -07:00
c35f65c6c0
target: Implemented a global target mass erase command
2022-07-13 19:34:57 -07:00
30e2106e40
target: Make the buffers used to program a target's Flash better bounded in lifetime and memory usage
2022-07-13 19:08:31 -07:00
3e9913e88b
Implement semihosting debug output redirection to usb-uart port.
2022-07-13 18:49:20 -07:00
c7b54d2eaa
BMP V2.3: Fix outdated ADC reads.
...
We are using GD32F103 on the BMP V2.3 hardware. The GD32F103 has an
errata for the ADC where the end of conversion (EOC) bit is not reset
when reading the ADC result. This resulted in us not waiting for the new
value to be acquired and reading an old value instead. The solution for
that is resetting the EOC bit manually after reading the ADC result, so
that on the next acquisision we wait for the conversion to finish.
This patch also increases the sampling time as the GD32 have lower ADC
impedance than the STM32 and this should help us read a more accuarate
target voltage.
2022-07-14 01:54:43 +01:00
4bc68409f8
kinetis: Clean up how kl_gen_flash_done builds the command buffers to send to ensure the security byte is OK
2022-07-11 17:12:23 -07:00
f0566979b0
kinetis: Fixed the flash write command generation for K64 devices
2022-07-11 17:12:23 -07:00
6f273cadd8
kinetis: Try to be safer about our FCCOB writes so the Flash controller's less likely to get mad
2022-07-11 17:12:23 -07:00
0c18fcefe3
kinetis: macro organization and clearer function naming
...
Signed-off-by: Rafael Silva <perigoso@riseup.net>
2022-07-09 15:55:37 -07:00
18a49ac853
kinetis: Run clang-format on the code
2022-07-09 15:45:06 -07:00
72e4f4d2b2
kinetis: Refactored out some common code from kinetis_probe for the S32K14 lineup
2022-07-09 15:45:06 -07:00
fee6f28915
kinetis: General formatting and readability cleanup
2022-07-09 15:45:06 -07:00
9b8d2fb822
stlink: Added documentation about the new SWIM_AS_UART build option
2022-07-03 18:05:02 -07:00
a95e2e80bc
stlink: Add option to turn SWIM/RST into UART RX/TX
...
Building for `stlink` with `SWIM_AS_UART=1` now enables the use of the
SWIM and RST ports as RX and TX on cheap ST-Link V2 clones.
This is done by using USART1 on the alternative port instead of USART2.
2022-07-03 18:05:02 -07:00
c26115b3f7
blackpillv2: clarify how to exit bootloader mode
...
There is no need to press any other "key" other than NRST button. So
update documentation according to that.
2022-07-01 06:56:57 -04:00
86a12ddaaa
blackpillv2: clarify how to enter to bootloader mode
...
According to [1] all PCB revisions have BOOT0 and NRST labels near
buttons. Reference those in README for ease of use.
PB2/BOOT1 has a 10k pull-down on PCB (in all revisions, according to
[1]), so there is no need to do anything on the board (like "jumpering
to GND") unless the board was modified by user. Hence don't reference
PB2/BOOT1 in the README, as it was just confusing to the user.
[1] https://github.com/WeActTC/MiniSTM32F4x1/tree/master/HDK
2022-07-01 06:56:57 -04:00
61c2724c9d
blackpillv2: fix PROBE_HOST in Readme.md
...
After renaming directory with s/blackpill/blackpillv2/, Readme.md still
contained the old 'blackpill' name in PROBE_HOST. Fix that by replacing
it with 'blackpillv2'.
Fixes: 3ccb0af21c
2022-07-01 06:01:06 -04:00
780ee7a2a8
Fix build error and logic ...
2022-06-28 06:31:16 -04:00
d78f7696cc
stm32/serialno: Run clang-format on the serial number code
2022-06-27 23:11:42 -07:00
fef40b701f
stm32/serialno: Fixed a typo in the 24 character serial number loop
...
before: 0670FF530000000000000000
after: 0670FF535567494867085055
2022-06-27 23:11:42 -07:00
d140b4b667
stlink: Fix the LED pinout on the Nucleo boards
2022-06-27 23:09:56 -07:00
1a963b81f6
target/stm32f1: GD32E230 option write special case handling
...
Signed-off-by: Rafael Silva <perigoso@riseup.net>
2022-06-27 18:13:52 -04:00
e7a7d82b33
target/stm32f1: remove unused code snippet and superfluous preprocessor check, less pedantic wording on warning
...
Signed-off-by: Rafael Silva <perigoso@riseup.net>
2022-06-27 18:13:52 -04:00
a5ebff14bb
target/stm32f1: remove redundant grouping ad for loop cleanup
...
Signed-off-by: Rafael Silva <perigoso@riseup.net>
2022-06-27 18:13:52 -04:00
90ed4fe31a
target/stm32f1: clang-format and code styling for better readability
...
Signed-off-by: Rafael Silva <perigoso@riseup.net>
2022-06-27 18:13:52 -04:00
5666fa2a2f
target/sam3x: add aditional check for valid EEFC addr
...
Signed-off-by: Rafael Silva <rafaelsilva@ajtec.pt>
2022-06-27 07:48:54 -04:00
1bca0323d9
target/sam3x: saner uninitialized variable prevention
...
Signed-off-by: Rafael Silva <perigoso@riseup.net>
2022-06-27 07:48:54 -04:00
3a02fdea9d
misc: Added a clang-tidy Makefile target so enforcing the formatting is easier
2022-06-26 18:55:04 -07:00
730a795f09
Add idcode for GD32F303CG detection
2022-06-26 21:00:26 -04:00
09f64b0627
misc: Added a HACKING.md to provide an explanation of nomenclature and how we handle reset terminology
2022-06-26 16:51:58 -07:00
c33d02bc19
hosted/stlink: Improved the information output and its consistency
2022-06-26 16:51:58 -07:00
aa9c80b37d
misc: Formatting consistency
2022-06-26 16:51:58 -07:00
2765811bbb
hosted/stlink: Naming consistency for 'stlink' global object
2022-06-26 16:51:58 -07:00
66b2d0659a
hosted: type naming consistency
2022-06-26 16:51:58 -07:00
baf84c9eb4
launchpad-icdi: Cleaned up and fixed some C89-isms
2022-06-26 16:51:58 -07:00
0139a349ab
hosted/FTDI: Cleaned up the error handling so the compiler can usefully tell us of errors in conditions
...
This also fixes an accidental assignment bug in libfti_max_frequency_set()
2022-06-26 16:51:58 -07:00
826840bf90
hosted/remote: Cleaned up the error handling so the compiler can usefully tell us of errors in conditions
2022-06-26 16:51:58 -07:00
fbe804f905
hosted/ftdi: Updated the 'cables' definitions
2022-06-26 16:51:58 -07:00
5ec848e948
hosted/jlink: Fixed use of 'int' where 'size_t' is more appropriate
2022-06-26 16:51:58 -07:00
9b53fbf6ea
launchpad-icdi: Fixed up and rewritten the serial number code to match what was done in #1041
2022-06-26 16:51:58 -07:00
c271c5c979
remote: Updated the naming in the remote protocol macros
2022-06-26 16:51:58 -07:00
adc03e47d6
hosted: Cleaned up and fixed the definitions of the fill functions for HOSTED_BMP_ONLY
2022-06-26 16:51:58 -07:00
94afb264e4
command: Cleaned up and improved the naming of cmd_reset and cmd_connect_reset
2022-06-26 16:51:58 -07:00
12fefa73c9
platforms: Cleaned up and fixed many markdown lint errors, improving the formatting of many of the platform README's
2022-06-26 16:51:58 -07:00
0dae6a4019
misc: Renamed connect_assert_nrst to clarify usage and align naming
2022-06-26 16:51:58 -07:00
b226c53d13
misc: Renamed CORTEXM_TOPT_INHIBIT_NRST to clarify usage and align naming
2022-06-26 16:51:58 -07:00
5edf549b48
misc: Updated comments and READMEs to properly reflect pinouts and function
2022-06-26 16:51:58 -07:00
2eaa579965
platforms: NRST and TRST naming consistency
...
This aligns the nRST and nTRST pin naming with the bulk of the README's for the platforms along with the hardware
2022-06-26 16:51:58 -07:00
a8e12d716d
misc: Renamed platform_nrst_{get,set}_val to clarify naming and provide consistency
2022-06-26 16:51:58 -07:00
bc9032da06
Fix uninitialized variables in target sam3x
...
Exposed while building hosted with -Og option
2022-06-26 18:52:12 -04:00
0612f2dc79
hosted: Documented the new command line option and added it to the ZSH completions
2022-06-26 14:28:35 -07:00
52dcf46e61
command: Done a little cleanup of the formatting and layout
2022-06-26 14:28:35 -07:00
10a4c3f77e
hosted: Implemented the extra logic to implement auto-scan in the CLI
2022-06-26 14:28:35 -07:00
2aea7238af
command: Implemented the new 'auto_scan' command for the firmware
2022-06-26 14:28:35 -07:00
ce3544b206
hosted: Removed unwanted automatic switch over to JTAG when SWD scan fails
2022-06-26 14:28:35 -07:00
b713376ce7
hosted/cmsis_dap: Fixed the naming of the cmsis_type_e enum
2022-06-26 14:24:08 -07:00
07321a4114
ch32f1: Fixed another broken debug print that made assumptions about %x and %d that are wrong
2022-06-26 14:19:46 -07:00
680a009690
cortexm: Added additional debug information for part probing
2022-06-26 14:19:46 -07:00
b5b2d4dc95
ch32f1: Re-ordered a couple of the operation in ch32f1_probe so it plays nicer with the STM32 parts
2022-06-26 14:19:46 -07:00
0368b76078
ch32f1: Further formatting and layout cleanup
2022-06-26 14:19:46 -07:00
fbc87cc518
ch32f1: Fixed the probe routine distrubing state for other parts wrt `t->idcode`
...
The CH32F1 routine now reads the IDCode into a local.
If the part number matches and appears to be the chip (based on Flash locking), it only then writes the IDCode into `t->idcode`, which is at the point we can only `return true` from the probe routine anyway.
2022-06-26 14:19:46 -07:00
08a8988462
ch32f1: formatting cleanup to bring things closer to inline with the rest of the codebase
2022-06-26 14:19:46 -07:00
9aba7ecce2
Define the long options structure as const.
2022-06-26 17:08:32 -04:00
84408fef57
Remove unwanted whitespace
2022-06-26 17:08:32 -04:00
3495207980
Further help text updates
2022-06-26 17:08:32 -04:00
7edd4b3379
Textual corrections to help
2022-06-26 17:08:32 -04:00
39bf17b768
Add back code lost during recent rebase
2022-06-26 17:08:32 -04:00
7dd82418e0
Implement long options initial commit
2022-06-26 17:08:32 -04:00
6f38b844af
stm32/serialno: Fixed a regression in 24 character serial number suport which was causing them to display all 0's
2022-06-26 14:06:18 -07:00
4a0e373b49
stm32/serialno: Fixed a small regression that made it in with #1041 resulting in a transposition of alpha characters in serial numbers
2022-06-26 14:06:18 -07:00
2673e34ddd
cortexm: fixed an issue with watchpoint handling and a register sanity check
2022-06-26 13:44:45 -04:00
1009329882
stlinkv2: Treat STLINK_SWD_AP_FAULT after STLINK_ERROR_WAIT as STLINK_ERROR_WAIT
...
cortexm_initial_halt() repeats the DHCSR write with high values for TRNCNT in
CSW. This is needed to catch a STM32F7 mostly in WFI. While the repeated write
is running, STLINKV3 on a Nucleo-WL55 (V3J7M2B0S0) answers first with
STLINK_SWD_AP_WAIT and on more read if write command is still running with
STLINK_SWD_AP_FAULT. At some point when the last command is finished, normal
STLINK_ERROR_OK indicates finally successful read. Treat STLINK_SWD_AP_FAULT
after STLINK_ERROR_WAIT as STLINK_ERROR_WAIT in that case. STLINK_SWD_AP_FAULT
may still be issued on other invalid accesses and should still be treated as
error in the other possible cases. Fixes #1071 .
2022-06-26 12:08:23 -04:00
b1a02d4f48
Correct filenames in the rest of the files using cl_utils.h
2022-06-26 12:04:21 -04:00
664a91b254
Fix filename in cmsis_dap.c
2022-06-26 12:04:21 -04:00
8a86faf49d
Rename cl_utils.* to cli.*, and fix references
...
File "serial_unix.c" edited but Linux build not done (Windows only dev environment)
2022-06-26 12:04:21 -04:00
0ebcba458d
Move all files from "pc" folder to "hosted", update Makefile.inc
2022-06-26 12:04:21 -04:00
fcae730bf8
Correct scanf format specifier
...
Rather than casting here, use PRIu32 - as in "%" PRIu32 ".%" PRIu32 - it's undefined behaviour and quite illegal to do the cast as, depending on platform, you'll end up with only some of the bytes in units and tenths written and which ones and what that means will depend on endianess.
2022-06-26 12:02:41 -04:00
02d2ba98d5
Enable power control in BMPA and add required functions
2022-06-26 12:02:41 -04:00
80c98df2f9
stm32wxxx: CPU2 needs wake-up call and has unexpected PIDR4 in AP1
...
"Single" core STM32WLE still sees AP1 but on first scan aborts gracefully
after some errors and on later runs sees AP1 as unusable. Fixes #832 .
Decode the Cross trigger interface found on CPU2 on STM32WBxx.
2022-06-25 16:52:36 -04:00
471ba19a77
adiv5.c: Read all CIDR data in one call.
...
E.g on STM32WXXX AP1 with C2BOOT not set, the AP base registers have valid
values but reading them fails and turns the AP unusable. BMDA reading CIDR
with multiple calls will will loop and finally hang up BMD. Other target
devices may show similar behaviour.
Reading CIDR with a single call allows recovery from in that case and
additional spares target transactions.
2022-06-25 16:52:36 -04:00
14d3846663
gdb_main: Fix a formatting bug that breaks, among other things, breakpoints
2022-06-24 18:35:31 -07:00
e702afad69
rp: Clean up code a little bit
2022-06-24 20:44:00 -04:00
e67cb9f43c
rp: Update rp_get_flash_length algorithm
...
Try to look for repeating sectors before reverting to reading the
JEDEC ID of the flash chip. This way we don't interrupt the flash
execution if a valid program is running, but can detect the flash
size if the flash memory has been erased.
2022-06-24 20:44:00 -04:00
f2cb13cf36
rp: Add rp_attach and rp_detach callbacks
...
Query JEDEC ID of flash chip on attach to be able to decode flash
chip size.
2022-06-24 20:44:00 -04:00
354e37fbad
rp: Tidy up some other things
2022-06-24 20:44:00 -04:00
ce273889fc
rp: Refector rp_flash_write
...
Fix typo in debug message
2022-06-24 20:44:00 -04:00
f4261c465e
rp: Refactor rp_flash_erase
...
Always align erase length to 4k sector size.
Check that start address and length are actually inside the flash.
2022-06-24 20:44:00 -04:00
dd571467b5
target/sam: slight gpnvm command usage correctness
...
Signed-off-by: Rafael Silva <perigoso@riseup.net>
2022-06-24 20:19:47 -04:00
d85e9fb7a2
hosted: Un-marked hid.c as exectuable as it can't be
2022-06-15 12:56:33 -04:00
14d7286db1
stlink: Added a little extra whitespace to help the readability of the platform header
2022-06-15 12:56:24 -04:00
7160bb987b
Fixup preprocessor definition
...
Suggested by @DragonMux
2022-06-14 13:45:51 -04:00
9f4d50a018
Change from tty.usb* to cu.usb* for more consistent behavior on OSX
2022-06-13 15:25:23 -07:00
b4c81f6302
platforms/f072: moved the linker script and fixed the build system
2022-06-12 17:10:32 -07:00
3e6bd6cdf2
platforms/f072: updated the platform definition
2022-06-12 17:10:32 -07:00
20e09abed2
platforms/f072: Introduced a new platform for the SMT32F072
...
F0 needs separation of DMA Interrupts, show problems with 128 Byte USART/DMA
buffers, perhaps caused by the st_usbfs_v2_usb_driver and has no
scb_reset_core.
2022-06-12 17:10:32 -07:00
fafe38ba19
hosted/cmsis-dap: Various CMSIS-DAP implementation correctness improvements
2022-06-12 16:35:15 -07:00
db4b568e52
Fix compatibility with dash as /bin/sh.
...
Ubuntu's default /bin/sh is dash, which does not support the `&>`
redirection syntax. This commit moves version.h generation back into the
Makefile, as 8afaedd8afaedd
2022-06-12 16:31:00 -07:00
7180a5b9a2
hosted: Fixed issues finding and linking HIDAPI on MacOS
2022-06-12 16:31:00 -07:00
7846112a7b
misc: Updated the build system to use the new version header generator script, fixing #1043
2022-06-12 16:31:00 -07:00
9a0e4b4f23
stm32/serialno: Cleaned up the inconsistencies in how DESIG_UNIQUE_ID_BASE is used in the serialno code
2022-06-12 16:18:39 -07:00
5a9131dcb2
stm32/serialno: Fixed a couple of mistakes made in the cleanup and attempted a different way to quiet the errant GCC warning
2022-06-12 16:18:39 -07:00
24ffef7175
stm32/serialno: Cleaned up the serial number handling code which is tripping GCC 11 up due to a compiler regression
2022-06-12 16:18:39 -07:00
1a316c5a2f
platforms/f3: moved the linker script and fixed the build system
...
We need build the right libopencm3 library which is not done by default, so this adds an extra build step for it
2022-06-12 15:58:11 -07:00
ef5cfd829f
platforms/f3: updated the platform definition
2022-06-12 15:58:11 -07:00
55a3132d1c
platforms/f3: Introduced a new platform for the STM32F3 series
2022-06-12 15:58:11 -07:00
af48a343a8
rp: Add description for SPI flash commands
2022-06-11 11:54:34 -04:00
b43b9a6545
rp: Add erase_sector to command list
...
The command can be used either by specifying the length only, or
the start address and the length like so:
monitor erase_sector <length>
monitor erase_sector <start_addr> <length>
If no start address is specified, it will begin erasing from the
start of the flash sector.
2022-06-11 11:54:34 -04:00
53672f1fc3
rp: Remove CHIP_ERASE command from rp_flash_erase
...
There seems to be a bug in the bootrom for the rp2040 which means
that the chip erase command is not accepted. This is because the
CS pin must be released (set high) directly after sending the chip
erase command (0x60 or 0xC7) (see Winbond W25Q128JV datasheet for
details). Instead the bootrom sends the address after the command,
thus the SPI flash silently ignores the command. Instead, we must
erase each 64KB block one at a time, but thankfull the bootrom
handles this correctly for us.
2022-06-11 11:54:34 -04:00
b1694dfab9
rp: Always use maximum flash size (16MB) when defining flash region
...
There are some cases when the this old method for finding the flash
size will fail, such as if the flash chip has been erased with 0xFF
bytes (rather than blank 0x00 bytes). As this is unreliable,
setting the wrong flash size could cause problems when trying to
inspect memory regions which appear to be out of range.
2022-06-11 11:54:34 -04:00
203c5149e7
rp: Add CORTEXM_TOPT_INHIBIT_SRST to target_options
2022-06-11 11:54:34 -04:00
4ec68023af
cortex-a: Fix compiling for native probe
2022-06-09 04:13:12 -04:00
483e51dce1
hosted/bmp_libusb: Further cleanup to the main bmp_ident string
2022-06-04 18:49:02 -07:00
19c2e56f13
hosted/cli: Cleaned up the information print out code so we only make one call for the whole thing
2022-06-04 18:49:02 -07:00
af0d597fb0
hosted/bmp_libusb: Cleaned up the bmp_ident code further
2022-06-04 18:49:02 -07:00
958a6d1a20
hosted: Switched the `bmp_ident` output and printing method from stderr to stdout
2022-06-04 18:49:02 -07:00
74d6c676bb
hosted: Rewrote the main usage help text
...
Rewritten with better descriptions of what options do,
cleaner option groupings and infomraation on option mutual exclusivity
2022-06-04 18:49:02 -07:00
3ccb0af21c
blackpillv2: Renamed blackpill to blackpillv2 to prevent ambiguity.
...
There is also such a thing as blackpill, that uses stm32f1 instead of
stm32f4. At some point we might get support for the original blackpill
and it will force us to change the name then.
2022-06-04 01:31:27 -04:00
e8fc418f47
blackpill: Added missing newline at the end of the platform.c file.
2022-06-04 01:31:27 -04:00
d55bfd8948
Added BlackPillV2 platform.
...
This was extracted from f4 platform to allow for easier build testing of
supported platforms.
2022-06-04 01:31:27 -04:00
fcdd93e008
Removed BlackPillV2 platform variant from the f4 discovery.
...
Combined platforms make it hard to do build testing, it is better to
have duplicate code and be able test all variants.
2022-06-04 01:31:27 -04:00
2624960422
96b_carbon: Updated the IRQ priority comment.
2022-06-03 20:35:51 -07:00
1861ccd155
96b_carbon: Corrected the linker script.
2022-06-03 20:35:51 -07:00
d91112e0d6
96b_carbon: Updated so that it compiles in the current codebase.
2022-06-03 20:35:51 -07:00
9730ae1429
build: Corrected the all_platform build target.
...
The target was building but not including the BMDA binary, as the
build system does not expect a binary that does not end with `.bin`.
Additionally this corrects the BMDA Makefile.inc that was missing the
`all` and `host_clean` targets.
2022-06-03 22:42:05 -04:00
f97047b5f5
build: Added all_platforms target to toplevel Makefile
...
The src level all_platforms target now also checks for locm3 existence
as well as triggers build of the needed locm3 libraries.
2022-06-03 20:40:35 -04:00
6656284728
added RTS and DTR to UART interface
2022-06-03 18:22:08 -04:00
7dc01e96e8
Complete the version string migration from 5e3cade, fixing HOSTED_BMP_ONLY
2022-06-03 14:42:18 -07:00
f6edb54395
Fix RP2040 memory sizes.
2022-06-01 11:41:58 -04:00
039bf14761
rtt: Cleanup and fixes for the RTT over serial support as per #954
2022-05-31 22:24:59 -04:00
2914be1a67
cortexa: Fix the new Watchpoint support causing a no-build
2022-05-31 22:03:21 -04:00
0b7dd00c77
cortexa: Indicate watchpoint as stop reason if there is only one.
2022-05-31 21:58:51 -04:00
b5ef9e5bcf
Implement watchpoints on Cortex-A
2022-05-31 21:58:51 -04:00
1aadcf2678
target/samx7x: handle tcm reconfiguration
...
Signed-off-by: Rafael Silva <perigoso@riseup.net>
2022-05-31 21:48:54 -04:00
dcc450a494
target/sam3x: rework gpnvm command
...
Signed-off-by: Rafael Silva <perigoso@riseup.net>
2022-05-31 21:48:54 -04:00
cf6ce32371
target: split mem_map_free into ram_map_free and flash_map_free
...
Signed-off-by: Rafael Silva <rafaelsilva@ajtec.pt>
2022-05-31 21:48:54 -04:00
8462f5e0d4
target/samx7x: handle tcm config on probe
...
Signed-off-by: Rafael Silva <rafaelsilva@ajtec.pt>
2022-05-31 21:48:54 -04:00
508b8d90cc
target/sam3x: name changes to reflect multiple supported families
...
Signed-off-by: Rafael Silva <perigoso@riseup.net>
2022-05-31 21:48:54 -04:00
430d306511
target: add samx7x probe method
...
adds support for SAME70, SAMS70, SAMV71 and SAMV70
Signed-off-by: Rafael Silva <perigoso@riseup.net>
2022-05-31 21:48:54 -04:00
233a83a702
hosted/ftdi: Add more adaptors - ESP-Prog, Tigard, Hifive1 and ARM-USB-TINY-H
2022-05-31 21:37:38 -04:00
d2ed681921
hosted/ftdi: Fix detect devices w/o genuine description but with given cable
2022-05-31 21:37:20 -04:00
c80f311cb4
pc/serial_unix: (hosted) Abort on unexpected problems.
2022-05-31 21:37:20 -04:00
2d4d6aa65a
ch32f1: Fixed the assumption that uint32_t is an `unsigned int`
2022-05-31 21:37:02 -04:00
94a0f1587d
ch32f1: Cleaned up some of the formatting
2022-05-31 21:37:02 -04:00
8afaedda37
update include/version.h only when content changes
2022-05-31 21:36:25 -04:00
0a0f5a9dd7
rtt
2022-05-31 21:15:41 -04:00
738ac96e57
Add 96Boards Carbon as a probe host
...
The carbon contains two SoCs, an STM32 (host) and an nRF51 (BLE). The
STM32 implements the probe and allows the board to reprogram its own
radio firmware!
2022-05-31 20:59:17 -04:00
5e3cadec20
Updated Copyright and Vendor strings to Black Magic Debug.
...
The project is not part of Black Sphere Technologies any more. It was
renamed to Black Magic Debug instead.
2022-05-30 15:09:55 -07:00
84311b3888
docs: Corrected org in links to blackmagic-debug
2022-05-30 14:32:36 -07:00
29dc94c3d6
hosted: with mubes help, fixes some issues with how we talk CMSIS-DAP
2022-05-17 15:46:33 -07:00
c4869a5473
hosted/stlinkv2: Cleaned up the new error messages as they weren't outputting nicely
2022-04-16 18:22:14 -04:00
a27661cd0b
hosted/platform: Formatting consistency improvements
2022-04-16 18:22:14 -04:00
ba8ed132a8
hosted/stlinkv2: Fix !found causing hosted to continue on anyway, and improved the error reporting from the device finder loop
2022-04-16 18:22:14 -04:00
4287f1ba0e
hosted/stlinkv2: Rewrote the serial number readering logic to not violate the USB spec and properly handle libusb errors
2022-04-16 18:22:14 -04:00
94e9281404
hosted/bmp_libusb: Rewrote the string reader logic to not violate the USB spec and properly handle libusb errors
2022-04-16 18:22:14 -04:00
c7eba0a439
hosted/bmp_libusb: Fixed some signed/unsigned issues and UB in send_recv
2022-04-16 18:22:14 -04:00
c5dbf851f6
hosted/bmp_libusb: Formatting cleanup
2022-04-16 18:22:14 -04:00
6b465d6a77
Temporarily enable DBG clock in stm32g0_detach(); fixes #1003
2022-04-12 05:39:14 -04:00
e535f53981
remove static vars
2022-04-10 23:40:44 -04:00
844ca65a8f
cosmetic
2022-04-10 23:40:44 -04:00
17dca6f791
tabify
2022-04-10 23:40:44 -04:00
733cf12663
cleanup
2022-04-10 23:40:44 -04:00
17d7dca9ae
build ch32 in its own file
2022-04-10 23:40:44 -04:00
7c120ecb58
put ch32f1 in its own file
2022-04-10 23:40:44 -04:00
04eb33e039
rename to comply to naming scheme
2022-04-10 23:40:44 -04:00
e12939582c
revert function clones_probe
2022-04-10 23:40:44 -04:00
83e3d9c135
disable verification
2022-04-10 23:40:44 -04:00
a3feae60aa
cleanup tabs
2022-04-10 23:40:44 -04:00
fb216a2a98
tabify
2022-04-10 23:40:44 -04:00
9b23265dde
add support for ch32 flash write, it is a bit hackish
2022-04-10 23:40:44 -04:00
90d15e6633
add probe for ch32 + make room for other clones
2022-04-10 23:40:44 -04:00
be83c2861e
gdb_packet: Formatting cleanup
2022-03-31 14:11:38 -04:00
e424859ecb
gdb_main: Formatting cleanup
2022-03-31 14:03:29 -04:00
804a1a4f43
stm32f4: Attach logic cleanup by making sure we only set the extra bits needed when writing DBGMCU_CR
2022-03-31 13:46:29 -04:00
eed1cc81ff
STM32F4: Move DBGMCU_handling to target specific code. Apply for F4 too.
2022-03-31 13:43:52 -04:00
b59ca5142a
pc hosted: Don't try to report memory usage.
...
When building on a pc gcc does not have that parameter and clang fails
with an error. This caused a build regression on Mac.
2022-03-29 16:45:08 -07:00
a0c77e216d
adiv5_swdp: Changed the low-level access code to retry till timeout (partial revert of 61efe26)
...
Proper initialisation of the ack value also fixes a potential use-before-init UB
2022-03-29 15:33:23 -07:00
d9ef3ff147
adiv5_swdp: Formatting consistency cleanup
2022-03-29 15:33:23 -07:00
bba2bfdcf4
advi5: Raise the access timeouts as 20ms is too low in some cases
2022-03-29 15:33:23 -07:00
cedd9f9ac4
follow function naming scheme
2022-03-22 10:10:33 -04:00
9007c40954
revert temp patch on platform.h
2022-03-22 10:10:33 -04:00
8b52bbd9a9
fix unused var / naming
2022-03-22 10:10:33 -04:00
b82ee6bc90
prototype for gdb_putpacket2
2022-03-22 10:10:33 -04:00
8fb3b7b1a8
reuse exception to avoid using the stack
2022-03-22 10:10:33 -04:00
82c41cb739
add putpacket2 to send two sub messages merged as one
2022-03-22 10:10:33 -04:00
48c6db1963
Remove duplicate definition of USBUSART_DMA_TX_ISR
2022-03-22 10:02:52 -04:00
e82d4f2eda
native: Fixes an hw version issue with some older BMP.
...
The BMP with hardware version 4 and newer, use option bytes instead of
physical GPIO to encode the hardware version. In some older BMP there is
a chance that the user option byte is set to 255 (0x00FF pattern). This
can throw off the hardware version detection routine.
2022-03-15 23:45:32 -07:00
bcba3ee4a9
native: Fixed hw6 USBUSART support.
2022-03-15 23:45:32 -07:00
06f24d3269
native: Added blocks to the ISR templates.
2022-03-15 23:45:32 -07:00
bb761e4b38
native: Initial addition of hw 6 support.
2022-03-15 23:45:32 -07:00
2d63021344
native: Improved pinout legend comment block.
2022-03-15 23:45:32 -07:00
e7982d594e
native: Added HW5 AUX interface definitions.
2022-03-15 23:45:32 -07:00
655014ac9c
native: hw rev 5 has the usb vbus sense pin on PA15.
...
We had to move the pin to free up the SPI SCLK pin.
2022-03-15 23:45:32 -07:00
9ffa923bc1
native: Update hwversion detection for hw rev 4 and newer.
...
The hw rev 4 and 5 both have the version stored in the Data1 user option
byte. This frees up the hw rev strapping pins for other uses, ie swtrace
decoding using USART1 RX, and additional peripherals on the SPI bus,
like bulk flash storage and displays.
2022-03-15 23:45:32 -07:00
488df7e6f7
sscanf cleanup in GDB Z packet handling function.
...
Tested working with arm-none-eabi-gcc 10.2.1
2022-03-15 13:18:00 -07:00
e0619ca7d5
Added a linker flag to output memory usage.
2022-03-15 11:41:31 -07:00
4fe8fd8944
samd: Fixed the hosted build as the code from #987 assumed unsigned long was 32-bit
2022-03-14 21:38:45 -07:00
e271c16f6c
Removal of MFR descriptions as requested in #978
2022-03-14 21:37:44 -07:00
c30e165c1c
crc32: Fix the launchpad-icdi build as that was broken
2022-03-14 21:37:44 -07:00
3bb8c2bf19
jtag_scan: Cleaned up the ones array to use a more correct syntax
2022-03-14 21:37:44 -07:00
75e786da11
jtag_devs: Added a few more parts based on 0170aff and cleaned up the description wording for the existing ones
2022-03-14 21:37:44 -07:00
23534ab174
target: Cleanup in target_new() for the check_error callback
2022-03-14 21:37:44 -07:00
361dc9c234
Revert "adiv5_swdp_scan: If SWD scan fails, try a JTAG scan."
...
This reverts commit 3df692ecb2
2022-03-14 21:37:44 -07:00
54f577a970
hosted/dap: Partial revert of 5c8e277, taking into account that division may not be available on platforms 'hosted' might see itself built
2022-03-14 21:37:44 -07:00
d1c9d94174
jtag_scan: Remove the now redundant IDCode parameter from the handlers
2022-03-14 21:37:44 -07:00
27c143a3a3
jtag_scan: Properly fixed the wrong IDCode getting to the handlers
2022-03-14 21:37:44 -07:00
7d2afcff06
Revert "jtag: Make jtag_devs argument to jtag_handler."
...
This reverts commit 6308506276
2022-03-14 21:37:44 -07:00
dragonmux
grumat
ylm
Rafael Silva
Sean Cross
Giovanni Santana
Piotr Esden-Tempski
Jonathan Giles
Anti Sullin
Silke Hofstra
Marcin Niestroj
Manoel Brunnen
SId Price
Maciej Musiał
Uwe Bonnes
James Turton
Mikaela Szekely
cyber-murmel
Dag Ågren
Gareth McMullin
Rafael Silva
Jonas Jelten
Koen De Vleeschauwer
Daniel Thompson
Michal Moskal
mean
Mike Ditto
Fabrice Prost-Boucle