f304e2d4f6
ADDED: Search/inspect pane
2022-09-14 02:59:57 +00:00
1a023f5dd0
PCB Editor: (Auto)Route Selected (From Other End)
...
3x Selection-Based Routing Tools. Takes a selection of routable objects
and routes them one at a time individually, with an attempted finish, or
from the other end, depending on the action given.
2022-09-13 15:06:36 +00:00
0a5ca5b485
Display crosshairs in picker tools.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10183
2022-09-13 01:40:43 +01:00
c2643f53cf
Tighter control over lambda capture.
2022-09-12 20:51:15 +01:00
eaccd40c75
Allow vias to connect <no net> tracks even when DRC checking is on.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12403
2022-09-12 20:38:21 +01:00
37d2addf0e
Icons: add swap
2022-09-12 11:11:49 -04:00
f70e1d0f22
SCH/PCB: Set Swap hotkey to 'S'
...
* Move Add Sheet to Shift+S in Schematic Editor
* Move Set Grid Origin to Shift+S in PCB Editor
2022-09-12 11:11:49 -04:00
de6e368ac6
PCB: Swap Tool
2022-09-12 09:39:43 -04:00
9cf3c529d3
Apply the same accuracy band to connectivity as we use for hittesting.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10745
2022-09-09 21:42:21 +01:00
5b3bd9be83
Prune pasted data of non-enabled layers.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11997
2022-09-09 21:02:08 +01:00
98e760da93
Coverity-suggested improvements.
2022-09-09 13:41:13 +01:00
2743fd583f
More improvements to drag tool selection disambiguation.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10745
2022-09-08 23:43:07 +01:00
a619ef9d53
Improve drop-a-knee-selection-to-a-single-segment algorithm.
...
In particular, don't rely on there being only two items in the
collector at the start.
Fixes https://gitlab.com/kicad/code/kicad/issues/10745
2022-09-08 14:10:18 +01:00
6b3d36b6c3
CONVERT_TOOL: also show the "Create From Selection" menu if a array can be created
...
The "Create Array" sub-menu was recently moved to this menu, so it must me
shown as soon as an array can be created.
2022-09-07 10:53:27 +02:00
d67c81a657
When deselecting items, pick only selected ones.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10292
2022-09-06 19:44:29 +00:00
963a17f5b5
fix a compil warning
2022-09-05 18:33:17 +02:00
895a8a8dbc
Work around focus issues for status popups.
...
Autoscroll wasn't working on Mac because the status popup's panel
has the focus. This *may* also fix a problem on MSW of the auto-scroll
not being cancel-able.
Fixes https://gitlab.com/kicad/code/kicad/issues/11425
2022-09-04 21:08:01 +01:00
efae2bbb4c
Better feedback for netclass assignment patterns.
2022-09-03 21:33:56 +01:00
c30a557810
ADDED netclass assignment from PCB canvas.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/5975
2022-09-03 19:29:59 +01:00
09773e3e2e
Make sure dirty flag gets set, and leave save enabled regardless.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11824
2022-09-01 14:27:16 +01:00
9188838e50
RIP EDA_RECT.
2022-08-31 23:57:24 +01:00
b4492e0bd2
More EDA_RECE yeetage.
2022-08-31 17:19:50 +01:00
ebe9617e77
More EDA_RECT expungification, and an attempt to fix the python test.
2022-08-31 17:19:48 +01:00
5679b9dbdc
Remove a few EDA_RECT instances.
2022-08-31 01:22:49 +01:00
0c8787cbb9
Some more wxPoint/EDA_RECT yeeting.
2022-08-31 00:44:33 +01:00
b736460e71
Move optional access from value() to *operator
...
`value()` throws. Where we check for existence, we don't need to use
the throwing version and should just use the unprotected variant
2022-08-30 13:59:39 -07:00
a176bf383e
Properties: pick up single selections
...
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/12302
2022-08-30 13:59:37 -04:00
91fbb5c957
Don't prevent immediate actions while router active
...
Immediate actions that can take place are useful. We should only be
preventing immediate actions while actively routing or dragging
Fixes https://gitlab.com/kicad/code/kicad/issues/12311
2022-08-30 10:31:29 -07:00
63386ba64d
Pointer safety for ERC/DRC dialogs.
...
Also makes the "Edit ingored violations" easier to find.
Fixes https://gitlab.com/kicad/code/kicad/issues/12308
2022-08-30 12:07:19 +01:00
2d68cdff94
Better reporting of hole-to-hole clearances and clearance resolutions.
2022-08-29 17:37:49 +01:00
b886ec728e
Copy shape data when converting PCB TEXTBOX to FP.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12298
2022-08-28 21:34:13 +01:00
3b4c5f0dc4
French translation update
2022-08-27 09:10:02 +02:00
09511d176c
Quiet Coverity.
2022-08-26 17:05:25 +01:00
06786c34d7
Blacklist hashes for 2d integer elements
...
The hash table for integer hashes is extremely limited and places most
elements in the same buckets. This leads to a linear search time for
structures built on this.
This blocks hashes, directing the coder to utilize std::set or std::map
structures instead of hash tables for implementing integer-based
lookups.
2022-08-26 08:43:37 -07:00
f1261e71d4
Replace boost::optional with std::optional
2022-08-25 15:50:47 -07:00
fb74bdb059
Don't consider rule area zones in priority calc
2022-08-25 10:12:58 -07:00
e661545ecf
Choose the first unused priority value for zones
...
Default the new zone priority value to the lowest available unused
priority. Ensures that, by default, a new zone has a unique priority
level preventing zones from unintenionally shorting
2022-08-25 10:05:30 -07:00
418df36790
Avoid teardrops in priority calculation
...
When choosing a new priority value, don't look at teardrops (which have
high priority)
2022-08-25 08:41:14 -07:00
3e4cfab254
Set new zone priority to unique number
...
Previously new zones' priorities were all set to 0. This is almost
always wrong and can lead to unintended conflicts. The new zone default
value is now set to one higher than the largest number on the board.
This is a better default value because it will not conflict with
existing values.
2022-08-24 16:37:57 -07:00
1871812f2b
Consolidate on a more widely used sub-type architecture.
2022-08-23 12:57:55 +01:00
f6f6ebd5f9
WIP: Properties GUI
2022-08-22 21:32:32 -04:00
1e68c353f1
Account for groups in undo of Position Relative To.
...
Also fixes a bug were pads weren't correctly being found for anchoring
the selection before the Position Relative To.
Fixes https://gitlab.com/kicad/code/kicad/issues/11793
2022-08-22 22:33:38 +01:00
3a76d42630
Cross-probing/selection for multiple items (PCB -> SCH)
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10469
2022-08-22 19:33:39 +00:00
03454684fa
Commenting.
2022-08-22 12:43:57 +01:00
4f0136db3b
Attempt to fix std::initializer_list lifetime issue.
2022-08-21 20:54:41 +01:00
28f7221cc3
Allow selection of Footprint Checker markers.
...
(And do a cross-probe to the Footprint Checker dialog.)
2022-08-20 11:30:25 +01:00
aa2ad3b44c
Move KICAD_T[] to std::initializer_list<KICAD_T>.
2022-08-20 10:28:11 +01:00
46df421064
ADDED defined pad groups for net-tie footprints
...
Each pad group is allowed to short nets with other pads in its group.
Legacy footprints with the "net tie" keyword hack will get a single
group auto-created with all the footprint's pads in it.
DRC and the router now allow a track to collide with copper graphic items
while entering a net-tie pad as long as the closest point in the collision
is within the pad.
DRC (and the footprint checker) now check for copper items in the
footprint shorting pads which are not in the same pad group.
Fixes https://gitlab.com/kicad/code/kicad/issues/2265
2022-08-19 18:54:20 +01:00
a60053c800
selectAllItemsOnSheet(): fix a typo that prevent selection of items in root sheet.
2022-08-19 11:12:16 +02:00
e0fbe2542f
Fix a few compil and Coverity warnings.
2022-08-19 10:53:29 +02:00
f06e28b7a7
PCB: Finish Route, Route From End
...
Adds restart routing from other ratsnest' end and automatically finish
routing.
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/5051
2022-08-17 03:15:46 +00:00
371f6d917f
Use VECTOR2I::extended_type instead of long, and int for numeric limits.
2022-08-16 12:08:55 +00:00
405be8d15f
Bounds-awareness in Move, Rotate, point editor, drawing tool
2022-08-16 12:08:55 +00:00
b81a3f0533
GetClampedCoords: Better usability for rounding
2022-08-16 12:08:55 +00:00
4d7d367b25
Use KiROUND for BBox calculation, change parameter name, block negative padding.
2022-08-16 12:08:55 +00:00
759e1a64ef
Fix broken const ref in wildcard
2022-08-15 12:09:30 -07:00
35ac39844f
Clean up some auto usage
...
Don't make new copies of shared_ptr if we can use references. Keep auto
usage down to hard-to-type-out sequences
2022-08-15 11:29:45 -07:00
1f347582f8
Introduce new marker type so we can track DRC errors on the drawing sheet.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12221
2022-08-15 18:03:03 +01:00
a9536b5de9
CHANGED netclass assignments now done via canvas or via patterns.
2022-08-14 22:56:29 +01:00
d6cd55e133
ADDED esc-removes-net-highlight preference to PCBEditor.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8760
2022-08-09 08:46:12 +01:00
ea914eac9a
Pcbnew: fix regression: Display board info when clicking on a empty place.
...
Previously: the displayed info was "Selected Items 0".
2022-08-05 13:49:01 +02:00
96f01d33c8
Performance improvements.
...
1) Move a bunch of std::map's to std::unordered_map to get constant-time
look-ups
2) Lengthen progress-reporting intervals to spend more time doing work
and less time talking about it
3) Reverse order of SHAPE_LINE_CHAINs in thermal intersection checks to
make (much) better use of bbox caches
4) Don't re-generate bboxes we already have
5) Fix some autos that weren't by reference (and were therefore copying
large datasets)
6) Rename delta progressDelta so it's easier to search for in future
7) Get rid of a few more autos (because I don't like them)
8) Pass large items to lambdas by reference
Fixes https://gitlab.com/kicad/code/kicad/issues/12130
2022-08-03 11:59:42 +01:00
43df863df2
Fix issue with caches not being initialized when printing msg bar.
2022-08-01 13:09:51 +01:00
0304ad4494
Move connection width testing to rule system.
...
Also copies connection width progress reporting architecture over to
the sliver checker.
2022-08-01 13:09:51 +01:00
927bc8141b
Init member variables.
2022-08-01 13:09:51 +01:00
54213bb7f1
Cleanup and move to DRC_ENGINE's status reporter.
...
1) brace formatting
2) get rid of some autos
3) get rid of a dyn_cast that CLion claims is bad
4) use DRC_ENGINE's status reporter
2022-08-01 13:09:51 +01:00
6f49b57f9b
Cleanup & performance enhancements.
2022-08-01 13:09:51 +01:00
a8505d9c76
SEARCH_RESULT -> INSPECT_RESULT
...
To fix the name squatting it's doing for future functionality
2022-07-29 20:01:10 -04:00
f0b9e67212
Add ignore-line-widths mode to CONVERT_TOOL.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/5911
2022-07-29 21:39:03 +01:00
fc1afa6298
Improvements to convert tool.
...
1) Handle filled shapes
2) If a chained outline can't be found, build hulls of the individual
segments
3) Combine intersecting shapes
4) Simplify code
Fixes https://gitlab.com/kicad/code/kicad/issues/git
Fixes https://gitlab.com/kicad/code/kicad/issues/5911
2022-07-27 18:57:45 +01:00
2bf33321d1
Update constraint mode in status bar during move.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10465
2022-07-27 18:57:45 +01:00
aabc3b3cc6
FP editor: fix crash when duplicating a footprint.
...
Fixes #12098
https://gitlab.com/kicad/code/kicad/issues/12098
2022-07-27 19:08:27 +02:00
cb6a2552d9
Use the FPEditor's status bar messages for FPBrowser.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11404
2022-07-26 18:45:02 +01:00
4d48376eae
Fix some warnings detected by PVS-STUDIO (not used vars)
2022-07-26 16:00:14 +02:00
1bad72f14f
Remove bad static_cast.
...
(m_settings isn't a PCBNEW_SETTINGS in non-PCB_EDIT_FRAMEs)
2022-07-24 23:41:41 +01:00
c16d0603c6
Add fix missing in my commit 8eee7667
2022-07-24 09:10:51 +02:00
8eee766791
Fix Cvpcb DISPLAY_FOOTPRINTS_FRAME: some display options not working. Commit 5e4a7041 moved 4 settings used in Cvpcb to a PCBNEW_SETTINGS struct. But in Cvpcb, this config struct does not exist. So these 4 settings are now moved to a section (PCB_VIEWERS_SETTINGS_BASE) common to Cvpcb and Pcbnew config.
2022-07-23 18:45:13 +02:00
9dd3bbf2cb
Change highlight net hotkey default.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12051
2022-07-23 12:34:48 +01:00
f41af10007
Clean up hole shapes for safety (smart pointer) and consistency.
2022-07-22 23:06:07 +01:00
5442d284f4
Improve strings for highlight net commands.
2022-07-22 09:31:11 +01:00
def87c969e
Redo the pinned-libraries storage architecture.
...
1) always use preferences directly
2) allow nicknames from either preferences or project
3) store-after-modify
Fixes https://gitlab.com/kicad/code/kicad/issues/12000
Fixes https://gitlab.com/kicad/code/kicad/issues/11892
2022-07-22 09:31:10 +01:00
b80fd5329d
Clear dimension pointer after committing.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11864
2022-07-22 09:31:09 +01:00
004abcd370
Leave originally selected items selected after cancelled move.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12024
2022-07-22 09:31:08 +01:00
16e3d40552
ADDED: Display calculated clearance in status bar
...
In addition to showing resolved clearance, we also show the calculated
clearance in the same method as is used for DRC. This will allow users
to better examine their system while working.
Fixes https://gitlab.com/kicad/code/kicad/issues/7934
2022-07-21 15:44:48 -07:00
49bf717c0e
fix minor compil warnings
2022-07-17 20:29:59 +02:00
2de10080cd
Add edge and margin clearances to message panel.
2022-07-15 16:14:32 +01:00
c98826c8b0
Open newly-pasted footprint on canvas of Footprint Editor.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11398
2022-07-15 14:13:39 +01:00
99f8b21ed1
PCB: Add bitmap layer per board layer
2022-07-14 11:23:23 +00:00
3669cb4673
PCB Editor: Add User Background Images
2022-07-14 11:23:23 +00:00
b5bf1da251
Keep track of blocking windows
...
Allows the calling KiWAY player to send messages to the blocking window
before signaling a separate call
Fixes https://gitlab.com/kicad/code/kicad/issues/11891
Fixes https://gitlab.com/kicad/code/kicad/issues/11772
2022-07-13 19:25:24 -07:00
20a372ff69
ADDED Clearance data in PCB editor status bar
...
When selecting two objects, display the resolved clearance and
(optionally) hole clearance in the status bar
2022-07-13 15:04:32 -07:00
e87ba10a5a
Enforce group selection to abide by L/R behavior
...
When selecting greedy (right to left), selecting any part of the group
will get the whole group. When selecting left to right, we must select
all items in the group to get the grouped items unless we are in the
group itself
Fixes https://gitlab.com/kicad/code/kicad/issues/11902
2022-07-12 11:01:34 -07:00
57acce9e55
Share more code between selection tools.
2022-07-11 19:04:08 -06:00
aaf99eb0cc
Performance optimizations.
2022-07-11 21:25:12 +00:00
19b4844102
Avoid OSX system shortcut.
...
CHANGED toggle net highlight from ctrl-` to opt-`.
Fixes https://gitlab.com/kicad/code/kicad/issues/10160
2022-07-10 20:20:22 -06:00
e122dc38bd
Add context menu item for clearing net highlighting.
...
In selection tools, drawing tools, router tool, line_wire_bus tool.
Fixes https://gitlab.com/kicad/code/kicad/issues/11920
2022-07-10 17:15:20 -06:00
654740b90d
Add newly-drawn objects to any entered group.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11912
2022-07-08 17:27:05 -06:00
8a9bf02b7e
Smarten up silk clearance & tented item handling.
...
The inspection tool will report whether or not the item is tented
(indicating in that case that any clearance will only be applied
to any hole).
The DRC test ignores tented items without a hole, and runs the
clearance test against the hole for items with a hole.
Fixes https://gitlab.com/kicad/code/kicad/issues/11954
Fixes https://gitlab.com/kicad/code/kicad/issues/11951
2022-07-08 17:27:05 -06:00
0c47a09517
Ensure rectangles are normalized
...
Normalize on creation and fixup rectangles previously saved with
inverted coordinates
Fixes https://gitlab.com/kicad/code/kicad/issues/11965
2022-07-07 10:40:18 -07:00
7b28804f67
Fix a minor compil and Coverity warning
2022-07-06 13:54:17 +02:00
f00de04336
FP editor: fix incorrect mirroring of zones in footprint.
...
This is due to a call to Mirror() with incorrect parameter.
Unfortunately, depending on FP items, one Mirror parameter has the opposite
meaning about mirror axis.
Fixes #11952
https://gitlab.com/kicad/code/kicad/issues/11952
2022-07-04 11:14:47 +02:00
cde30d3dba
Clarify cross-probing options
...
Previous the cross-probing options were mixed between sending and
receiving cross-probe events. This clarifies so that all of the pcbnew
cross-probe options deal with whether the cross-probe is seen in pcbnew
and all of the eeschema options deal with seeing the event in eeschema.
Also updates the wording in the options panels to be the same where
possible and adds tooltips
Fixes https://gitlab.com/kicad/code/kicad/issues/11454
2022-07-01 16:47:09 -07:00
af6ba1a16e
Fix typos in pcbnew sub-directory
...
Found via `codespell -q 3 -S *.po,./thirdparty,./Documentation/changelogs -L aactual,acount,aline,alocation,alog,anormal,anumber,aother,apoints,aparent,aray,ba,busses,dout,einstance,leaded,modul,ontext,ot,overide,serie,te,,tesselate,tesselator,tht`
2022-06-30 09:39:45 -04:00
64b89639cf
PCB Editor: Make Ctrl-Click net highlighting configurable
...
Defaults to ctrl-click is exclusive or selection like other
applications. Footprint editor can only be exclusive or.
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/10810
2022-06-28 16:29:14 +00:00
ab9c42d427
Fix a typo which leads to a bogus type-cast.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11886
2022-06-27 23:07:06 -06:00
23e8bafd9c
Don't run courtyard conflicts in footprint editor.
2022-06-20 22:25:39 +01:00
298edb09c3
Initialize TEXT_ATTRIBUTES justifications for text & textboxes.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11805
2022-06-20 17:03:37 +01:00
73836b50fc
Add proper collision test to via placer.
...
Also moves DISALLOW constraint processing outside the loop as it
performs it's own loop over any objects referenced by the rules.
Fixes https://gitlab.com/kicad/code/kicad/issues/11832
2022-06-19 21:57:49 +01:00
5da817649b
Fix nullptr bug.
2022-06-18 13:04:06 +01:00
97b0005780
More caching for DRC.
...
Also fixes a bug where some physical clearance tests would be run even
if the clearance was 0 (or if the rule was set to IGNORE).
2022-06-17 23:58:31 +01:00
d40664d171
Handle double-click in dimension drawing tool.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11815
2022-06-15 18:07:50 +01:00
87f10ea206
Split off the netlist export content helper but it's advancedcfg
2022-06-11 23:09:47 -04:00
9b70308f5c
Nullptr defensive code.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11690
2022-06-11 22:32:12 +01:00
d31bd4ea3e
Use default text properties for textboxes.
...
Also make sure text is mirrored when placed on back of board.
Fixes https://gitlab.com/kicad/code/kicad/issues/11739
2022-06-03 18:48:09 +01:00
bd51b33f65
Clear point editor before recombining pad.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11731
2022-06-02 15:55:35 +01:00
de12c63de6
Repair point editing of rotated text boxes.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11432
2022-06-02 10:42:57 +01:00
f8829de5ea
Formatting.
2022-06-02 10:42:57 +01:00
155620cc9a
Move H/V/45 mode from zone properties to toolbar.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8587
2022-05-29 21:30:15 +01:00
1fb7532859
Prepare for a more uniform implementation of H/V/45 mode.
2022-05-29 21:30:14 +01:00
21a7e050ab
REMOVED: PCB Editor Layer Alignment Target
...
No longer used by modern PCB processes.
Only the code to add the target to the board has been removed. Parsing
code for existing designs with targets is left in place.
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/10006
2022-05-26 08:47:02 -04:00
f7fcc310f8
Select next/prev copper layer whether we start on copper or not.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11600
2022-05-20 15:59:29 +01:00
a09bd4ae12
Fix a bug in commit 57e59a49
2022-05-20 15:08:50 +02:00
57e59a4959
Pcbnew, on line DRC when moving footprints: add visible collisions between courtyards
2022-05-20 12:58:05 +02:00
23fb4c7433
Uniformly use a single facility for location-less prime events.
...
Also implements a uniform mechanism for avoiding auto-scroll after
a prime event or dialog which results in a mouse position at the
edge of the canvas.
Fixes https://gitlab.com/kicad/code/kicad/issues/11057
2022-05-16 23:43:00 +01:00
f2fc78f380
Don't copy modifiers to prime events.
...
The modifiers go with the hotkey, not with the action.
Fixes https://gitlab.com/kicad/code/kicad/issues/11618
2022-05-16 13:51:40 +01:00
37838dffb9
Make sure physical_clearance rules are run against courtyard layers.
2022-05-10 23:02:53 +01:00
30ecca464d
Rename mechanical_clearance -> physical_clearance.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11554
2022-05-06 15:54:46 +01:00
5d0d2201f3
Improve clearance report messages.
...
Removes some duplicated terms; puts in some more headers to make
visual parsing easier, and makes non-connected-pads report the correct
data.
Also fixes a bug where zone-connection overrides of none weren't getting
handled correctly.
Fixes https://gitlab.com/kicad/code/kicad/issues/11544
2022-05-03 16:30:04 +01:00
5f10c15a87
Fix zone merge intersection algorithm.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11492
2022-04-29 22:17:53 +01:00
f5d612eaed
Switch <insert> replacement on OSX to <f1>.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11413
2022-04-25 10:01:33 +01:00
90bfe2d94b
Remove Save Copy As from fp editor, and rename to Save a Copy elsewhere.
...
It's still used by Eeschema and PCBNew when not in stand-alone mode.
Fixes https://gitlab.com/kicad/code/kicad/issues/9185
2022-04-24 19:46:57 +01:00
f0dab2e07b
Fix some layer handling issues.
2022-04-23 21:29:46 +01:00
c6f83b6dec
ADDED Duplicate Footprint, Rename Symbol and Rename Footprint.
2022-04-22 22:06:51 +01:00
b42365190e
Schematic/PCB: deleting fields sets them to invisible
2022-04-21 16:20:23 +00:00
26370583fa
French translation update and fix a typo.
2022-04-18 11:25:51 +02:00
71c2cb3180
ADDED revert for pcbnew and eeschema.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6802
2022-04-17 20:02:58 +01:00
9ff1ae5bdc
Better inspection reporting for netclasses, custom rules and DRC.
2022-04-17 00:33:56 +01:00
7f3a75bccd
Add a bunch more inspections for rule resolution.
2022-04-15 22:10:13 +01:00
c78a47c3fb
Remove extra test.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10364
Fixes https://gitlab.com/kicad/code/kicad/issues/10364
2022-04-14 17:09:27 +01:00
a49bb792bd
Insert chevrons when placing vias near tracks.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10898
2022-04-11 16:26:36 +01:00
29eb5931c2
Be more careful with forced cursor positions.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9977
2022-04-10 23:14:57 +01:00
c17b90c8dc
Run pinning on sides as well as corners.
...
Also fixes a bug in LIB_SHAPE's Normalize() which wasn't handling the
upside-down coordinate system.
Fixes https://gitlab.com/kicad/code/kicad/issues/11339
2022-04-07 11:51:58 +01:00
9fcc641808
Don't set the dirty bit when running DRC
...
Dirty bit is set in the zone filler separately, there is no action in
the DRC that needs to be saved
Fixes https://gitlab.com/kicad/code/kicad/issues/11344
(cherry picked from commit 821fe6ea42
2022-04-06 17:05:19 -07:00
f272056f20
Fix assert.
2022-04-04 20:43:08 +01:00
7f7910d922
Dirty text caches in pcb point editor.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11319
2022-04-04 17:39:58 +01:00
737d65fd36
Skip zero-size elements when converting
...
Also fixes an assertion when converting to polygon from the board editor
Fixes https://gitlab.com/kicad/code/kicad/issues/11313
(cherry picked from commit 6706a5c462
2022-04-01 13:24:10 -07:00
d174af4006
Handle textboxes moving back to RECT shape (ie: cardinal rotation).
2022-04-01 16:12:23 +01:00
a35ae8cdce
Don't re-fetch selection when running select-in-same-sheet.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11110
2022-03-28 21:54:24 +01:00
e51ab86225
Schematic Drag: fixes and improvements
...
Fixes:
* Various special cases around junctions on pins and dragging.
* Some rotations of endpoints resulting in a 45 degree rotate.
* Some cases where it was possible to get a line with neither
endpoint selected, and also substractive unselecting only one of two
selected endpoints unselecting both.
* Use line midpoint for sorting. Start and endpoints aren't
consistent in the order they appear on the X or Y axis. So,
we need to use the midpoint for our position for consistent
sorting when dragging groups of parallel lines where some
have the start and end reversed.
Other:
* Rename TEMP_SELECTED TO SELECTED_BY_DRAG. This is the actual meaning
of the flag, and should reduce confusion as
to when it should be used.
* Move usage of TEMP_SELECTED as an algorithmic mark to CANDIDATE
instead.
* Fix mistaken clearing of START_POINT and ENDPOINT.
* Move endpoint setting and clearing out of narrowSelection, and into
selectPoint and selectMultiple.
* Don't show dangling end warnings on new lines
2022-03-28 16:02:48 -04:00
343b2681d4
Midpoints for eeschema rectangles and text boxes.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10362
2022-03-28 11:16:39 +01:00
7da7864f5e
Fix some Coverity issues.
2022-03-25 15:51:05 -04:00
7b2d9dfc0c
Fix some Coverity uninitialized scalar variable issues.
2022-03-24 13:17:07 -04:00
cf611f1742
Better safety around layersets.
2022-03-21 18:19:00 +00:00
4f62960334
Update message panel from PCB point editor and SCH drawing tools.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11186
2022-03-21 10:32:36 +00:00
fa5a484797
Remove unused variable.
2022-03-16 14:56:32 +00:00
06c1bccccd
Exclude hidden text from selection in FP Editor.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11111
2022-03-12 23:29:01 +00:00
d452f79860
pcbnew: search for nets
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/10601
2022-03-10 23:12:30 +00:00
b5c2f0d39a
Remove the open array in favor of std containers
...
The containers allow iteration, size knowledge and lower bug surface
2022-03-03 16:03:26 -08:00
ec5b7a57ec
Consistency in via dimensions terminology.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11024
2022-03-03 22:40:18 +00:00
2fafa55647
Maintain width of converted tracks
2022-03-02 10:45:53 -08:00
7e836ae27a
Select the copper layer before processing
...
If we are converting to tracks, the copper layer needs to be selected
before any other elements are processed, otherwise, we end up with the
default undefined layer
Fixes https://gitlab.com/kicad/code/kicad/issues/11025
(cherry picked from commit 9396735733
2022-03-02 10:41:44 -08:00
1966972fc1
Retire no-pads warning in favour of defaulting to area-based remove islands strategy.
2022-03-01 19:19:18 +00:00
843a56c4e4
Implement two-staged zone priority: assigned priority followed by UUID.
2022-03-01 14:53:35 +00:00
a4a3f6ff74
Fix zone/connectivity deadlock.
2022-03-01 12:02:17 +00:00
fab78af176
Remove TEDIT
...
This marker is not used in KiCad and creates merge conflicts when two
different users edit the same file
2022-03-01 00:25:44 +00:00
58b8d63ff8
Draw boundary based on first zone layer.
2022-02-28 21:40:36 +00:00
d299ddbc7e
Cleanup.
2022-02-27 12:05:39 +00:00
ae85f57577
Drop a knee between tracks to a single item when dragging.
...
This prevents the disambiguation menu from coming up when we don't
really care which element we start the drag on.
Fixes https://gitlab.com/kicad/code/kicad/issues/10745
2022-02-26 22:54:23 +00:00
89c14f01f7
Repair algorithm to avoid slow movement issue.
...
This goes back to the previous code for this one part.
Fixes https://gitlab.com/kicad/code/kicad/issues/10976
2022-02-26 15:58:44 +00:00
535ea800c0
Honor modifier keys in diambiguation
...
Needs to be reset for the new action before selecting elements at a
point.
Fixes https://gitlab.com/kicad/code/kicad/issues/9712
(cherry picked from commit a30ad0b54a
2022-02-25 16:16:15 -08:00
283aaff2df
Use board polygon instead of bbox for size
...
Board BBox uses the visible size of the board, which includes edge cut
thickness. This is not appropriate for the Board characteristics.
Using the outline polygon gives accurate results and falls back to a
bounding box in the case where the outline is invalid
Fixes https://gitlab.com/kicad/code/kicad/issues/10972
(cherry picked from commit 54f621c570
2022-02-25 11:14:54 -08:00
a7b8a1446b
fix minor compil warnings.
2022-02-25 14:26:37 +01:00
bc51c89c90
Reconcile zone-auto-fill with undo.
2022-02-25 13:05:49 +00:00
5c54f40eae
Layer visibilities aren't stored in project for footprint editor.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10953
2022-02-25 00:08:49 +00:00
d65f9ad2d8
Implement multi-layer stitching via logic.
2022-02-24 21:32:43 +00:00
369f53bb19
Better DRC checking when placing vias.
2022-02-24 21:32:43 +00:00
b7be42375d
Add an infobar warning when trying to fill a zone which is not connected.
2022-02-24 21:32:43 +00:00
d465eb6425
ADDED: automatic zone refilling.
...
This is for the out-of-box experience for novice users. It is presumed
that folks with larger more complicated boards will turn it off.
Fixes https://gitlab.com/kicad/code/kicad/issues/6413
2022-02-24 18:16:45 +00:00
f076d07e9e
Fix asserts.
2022-02-24 18:16:45 +00:00
41f6e634c6
Partially integrate grid snapping with constraints.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10941
2022-02-22 22:19:55 +00:00
df3291c59d
Fix nullptr error (no router tool in footprint editor).
2022-02-20 16:56:53 +00:00
f18aae679c
Use router to update message panel when routing.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10068
2022-02-20 16:50:30 +00:00
85805b95ba
Cancel or commit pad edit mode when switching footprints.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10209
2022-02-19 19:36:19 +00:00
5efa354f0f
Add asserts to flush out incorrect uses of GetLayer().
2022-02-18 12:14:38 +00:00
662fb40605
Slightly cleaner impl.
2022-02-17 12:48:29 +00:00
5a9fb08778
zone_filler_tool: fix crash due to a null pointer use in zone filler.
...
Fixes #10875
https://gitlab.com/kicad/code/kicad/issues/10875
2022-02-17 09:21:14 +01:00
b1bd8421e0
Performance: remove associated triangle sets when removing outline.
...
This saves us having to re-triangulate at the end of zone filling.
2022-02-16 17:00:54 +00:00
5c9e718407
Performance enhancements for connectivity.
...
1) Generate SHAPE_POLY_SET triangulation by outline so they can be
shared between connectivity system and other clients.
2) Don't add items to connectivity when reading board; we're going
to do a total rebuild anyway.
3) Use multithreading when caching triangulation.
2022-02-15 12:20:34 +00:00
98b9c6e2a1
Better progress reporting and a slight performance boost on commit.
2022-02-15 12:20:34 +00:00
d2de114d21
More performance optimizations.
2022-02-15 12:20:34 +00:00
876061369b
Fix some Pcbnew crashes due to null pointers
2022-02-14 13:46:05 +01:00
a2ca8cf413
Improve SNR.
2022-02-12 18:38:11 +00:00
00934fdd84
Move GUI queries in PLUGIN to a callback.
...
Also makes sure legacy zone fills get deleted and re-filled (since
just dropping the outline will change them).
2022-02-11 22:09:22 +00:00
68655540eb
Clamp cursor to limits of coordinates representation
...
Also improves large distance handling.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8846
2022-02-11 16:42:52 +00:00
50a4d610a6
Be cognizant of flashed layers when generating pad shapes.
2022-02-11 13:10:52 +00:00
51d7b49067
Don't halt expansion on zero-length
...
We avoid counting endpoints for tracks that have no length
2022-02-07 13:53:42 -08:00
162545ddf0
Validate arc output when editing
...
Handles checking output of the arc to ensure we don't end up generating
an invalid arc. Also keeps the limit of the arc angle to be (360,360)
excluding 0.
Fixes https://gitlab.com/kicad/code/kicad/issues/10070
(cherry picked from commit 8fc831cbc2
2022-02-07 08:55:53 -08:00
2485648a54
Fix typo in a copy/paste and a minor compil warning
2022-02-07 17:32:19 +01:00
34a9a165c9
More wide-string declarations.
2022-02-05 22:26:31 +00:00
a7ebfc31f9
Fix some leaking objects identified by PVS Studio V773
2022-02-05 11:16:11 -05:00
4cc1ced2f3
Log an undo item when filling zones.
...
If we wanted to put it into the parent's undo item, then the *parent*
would need to not start a new undo record. Not starting one in the
zone filler tries to add it to the *previous* change, not to the parent
change.
Fixes https://gitlab.com/kicad/code/kicad/issues/10091
2022-02-04 13:45:32 +00:00
8d3e1639d0
Update text variables when they change.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10734
2022-02-04 12:52:46 +00:00
c8d14ade65
Only run starved-thermals checks when pad is actually connected to zone.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10583
2022-02-02 13:09:27 +00:00
5739505aa3
TextBoxes for PCBNew.
2022-01-31 20:00:47 +00:00
f846f6f704
PCB_CONTROL::unfilledZoneCheck(): skip rule areas: they are not filled by definition.
...
Fixes #10691
https://gitlab.com/kicad/code/kicad/issues/10691
2022-01-31 17:01:52 +01:00
e9ffea83fd
Cross-probing: Do not center/zoom on empty BBox
2022-01-31 10:17:59 +03:00
f8d6bf4cc9
Hide text items which are required on a single-item delete.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9973
2022-01-22 22:27:41 +00:00
5449a92878
PCB_POINT_EDITOR: fix missing init of PAD pos0 after changing the PAD draw pos.
...
Fixes #10558
https://gitlab.com/kicad/code/kicad/issues/10558
2022-01-22 10:23:55 +01:00
d5a2059c21
Error messages for zone merging.
...
Also fixes a bug where zones meeting at a point would get merged
resulting in a self-intersecting zone.
Also fixes a bug where undo would not be handled correctly when zones
could not be merged.
Fixes https://gitlab.com/kicad/code/kicad/issues/10466
2022-01-21 19:55:57 +00:00
c8a50d9b50
Remove unit-less angles from VECTOR2I/D APIs.
2022-01-20 23:58:20 +00:00
47c0672ff3
Added footprint rule area anchors
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/10461
2022-01-19 18:25:20 +00:00
bc1ff6756f
Cross-probing/selection for multiple items (SCH->PCB)
2022-01-16 20:29:03 +00:00
e84c574830
Some more EDA_ANGLE cleanup.
2022-01-16 19:16:18 +00:00
9b661aea10
EDA_ANGLE for plotters.
...
Also fixes a compile error in the PNS Playground.
2022-01-16 01:19:45 +00:00
22a77d3556
Move EDA_ANGLE to KiMath lib
...
KiMath should only depend on itself not on other elements in the tree
2022-01-14 17:12:24 -08:00
07013d00e1
More EDA_ANGLE.
2022-01-14 16:08:19 +00:00
5176512de3
Move PCBNew rotation increment to EDA_ANGLE.
2022-01-14 16:08:19 +00:00
c9487bad18
Move BOARD_ITEM::Rotate() to EDA_ANGLE.
2022-01-14 16:08:19 +00:00
abd3f5bc2b
Move footprints to EDA_ANGLE.
2022-01-14 16:08:18 +00:00
d485eb2514
Move pads to EDA_ANGLE.
2022-01-14 16:08:18 +00:00
de7158b80e
Include Footprints within Groups when re annotating duplicates
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/10329
2022-01-11 20:51:03 +00:00
fade00a2b8
Remove default hotkey for toggle zone display
...
It is too easy to accidentally hide your zones and the 'A' hotkey is
intuitively mapped to Add Footprint, to match Add Symbol in eeschema.
This won't change current hotkey customizations but will help prevent
future user error. Users can still map the action to a hotkey if the
new toggle is useful to their workflow
(cherry picked from commit 4d899d7820
2022-01-10 11:52:41 -08:00
bf38cb56b7
Handle footprint shapes in polygon creation
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/10259
(cherry picked from commit f9d8ec6137
2022-01-04 21:31:47 -05:00
4be56825bb
Fix creating polygons from footprint rule areas
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/10257
(cherry picked from commit e9b91b6fab
2022-01-04 21:31:40 -05:00
ed35f4bfc5
Fix pad snapping in renumber pads
...
Snap shouldn't be looking for other items in this routine or using the
grid
Fixes https://gitlab.com/kicad/code/kicad/issues/10238
(cherry picked from commit ed9a3deb57
2022-01-03 19:39:04 -08:00
89c0f8e297
Move to new font engine.
2022-01-02 14:57:03 +00:00
7d671cff1e
Scoop up some more wxPoints
2022-01-01 21:06:40 -05:00
410ed8a071
Prevent ops on empty selection
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10164
(cherry picked from commit bd75cffff3
2022-01-01 15:29:18 -08:00
d1552c3fec
Some more wxPoint removal
2022-01-01 12:11:21 -05:00
c4c56de708
Neurotically update position wxPoint usages
2022-01-01 11:55:51 -05:00
347e03363a
Convert wxPoint/wxSize starting from EDA_RECT usages
2022-01-01 11:30:33 -05:00
86cb57f4a7
Cherry-pick TEXT_ATTRIBUTES and EDA_ANGLE from rockola/kicad-strokefont
2021-12-28 22:15:20 +00:00
3a8ffd40b8
Fix dimension drawing bug.
2021-12-26 17:30:21 +00:00
ab583a32f9
Better layer handling for DRC markers.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10126
2021-12-26 15:06:12 +00:00
5e4a704155
Remove some more duplicated preferences.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10112
2021-12-26 13:37:28 +00:00
fa908e1f98
Dimensions for footprints.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8441
2021-12-24 21:10:28 +00:00
ed79f6e511
Clean up some TODOs.
2021-12-24 21:10:28 +00:00
da11574a19
Remove dead code.
2021-12-24 21:10:28 +00:00
b4c5e64db2
Exclusions for Unconnected Items; Markers & exclusions for Parity checks
...
Fixes https://gitlab.com/kicad/code/kicad/issues/5589
Fixes https://gitlab.com/kicad/code/kicad/issues/5504
2021-12-24 21:10:28 +00:00
e363a0eedc
ADDED Edit Text and Graphics Properties for Footprint Editor.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9650
2021-12-24 18:13:21 +00:00
3f90b3e2a0
Keep line stroke params as long as layer doesn't change.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6210
2021-12-24 16:13:51 +00:00
b7e196b710
ADDED assertion constraints for user-defined DRC checks.
2021-12-24 16:13:18 +00:00
4ba3937f8a
Cleanup.
2021-12-24 15:43:24 +00:00
d28714167c
All the preferences, all the time.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7877
Fixes https://gitlab.com/kicad/code/kicad/issues/5153
2021-12-24 13:08:44 +00:00
56c85bd354
Improve clearance and constraint resolution reporting.
...
1) Report on all applicable clearance types
2) Don't double-book constraints if they're used by more than one
test provider
Fixes https://gitlab.com/kicad/code/kicad/issues/8961
2021-12-23 22:31:26 +00:00
a48867ea01
Solder mask integrity testing.
...
ADDED DRC test for solder mask aperture bridging copper from different
nets.
ADDED visualization of minimum web width processing for solder masks.
ADDED allow_soldermask_bridges property for footprints.
Fixes https://gitlab.com/kicad/code/kicad/issues/2183
Fixes https://gitlab.com/kicad/code/kicad/issues/1792
2021-12-23 22:31:14 +00:00
32721755bf
Hook up zone-pad connections to custom rules.
...
ADDED zone_connection constraint.
ADDED thermal_relief_gap and thermal_spoke_width constraints.
ADDED angle override for thermal relief spokes in Pad Properties.
Fixes https://gitlab.com/kicad/code/kicad/issues/4067
2021-12-23 22:30:26 +00:00
e26341d424
Cleanup.
2021-12-23 20:36:18 +00:00
2bc86fa0a8
Shapes for schematic.
...
ADDED arc, circle and rectangle shapes for schematic. Shapes support
line styles and fill colors.
CHANGED sheet background color in Edit Text & Graphics Properties to
fill color (and it now affects shapes).
Pushed STROKE_PARAMS down into common and moved all shapes to using it
for stroke descriptions.
2021-12-23 20:36:07 +00:00
4b6bf3095a
Radial dimensions.
...
ADDED radial type dimensions.
Fixes https://gitlab.com/kicad/code/kicad/issues/2056
2021-12-23 19:34:54 +00:00
d9dba2edb2
Tidy up pad & parent footprint selection corner cases.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9923
2021-12-23 16:54:03 +00:00
f696c4ddfc
Fix failure to remove hover selection after rotate operation.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10058
2021-12-23 16:54:03 +00:00
956ac871c3
PCB Editor: changes to track width overrides starting track width
...
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/8797
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/8797
2021-12-15 23:32:48 +00:00
401de24274
Recalculate ratsnest after zone fill
...
Push the mutex down into the ZONE::Fill() routine and set the
connectivity update to run after zone fills. The connectivity update
cannot run while the mutex is locked for zone fills.
Fixes https://gitlab.com/kicad/code/kicad/issues/9993
2021-12-14 13:37:15 -08:00
4c565fd222
Top layers includes a whole bunch of layers...
...
... and the first isn't particularly meaningful. Use GetActiveLayer
instead.
Fixes https://gitlab.com/kicad/code/kicad/issues/9972
2021-12-13 18:23:18 +00:00
84e0feeee6
LibTree selection should follow footprint after Save As.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9913
2021-12-10 00:45:21 +00:00
62e6f542ed
Init zone type when creating in convert tool
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9918
2021-12-09 18:20:30 -05:00
9884f40952
Update call signature for SwitchLayer
...
We don't use DC anymore
2021-12-09 10:14:11 -08:00
a9168860e0
Reduce excessive epsilon in polygon search algo
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9903
2021-12-08 21:04:23 -05:00
587ee890d9
Move where flag is cleared to catch more cases
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9892
2021-12-08 20:46:53 -05:00
e9847cf2bd
Exclude vias from first 'U' step.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9902
2021-12-08 23:16:33 +00:00
df1e74d418
Clean up dead code from last commit.
2021-12-08 23:16:33 +00:00
7ffd43a6f4
Regularize the promotion of pads to footprints in non-free-pad mode.
...
Also regularizes some of the other selection filtering options.
This also fixes an invalidated iterator (and subsequent segfault) in
the old code.
Fixes https://gitlab.com/kicad/code/kicad/issues/9896
2021-12-08 13:08:54 +00:00
9c619d8f4e
Allow some navigation tools when selecting
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9565
2021-12-07 23:00:39 +00:00
a7193e0932
Do not warp cursor to last location when footprint/text placement is activated from toolbar/menu.
...
Also makes the footprint appear instantly after closing the dialog.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9840
2021-12-07 22:48:56 +00:00
73b39e836d
Set modify bit when editing page layout.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9891
2021-12-06 23:08:33 +00:00
2446844cd3
Fix bugs in free-pad logic.
...
Don't promote pads to parent footprint selection when NOT in free
pad mode during move.
Implement move algorithm in rotate.
Fixes https://gitlab.com/kicad/code/kicad/issues/9893
2021-12-06 22:53:45 +00:00
04b0435c45
Snap to pads when placing via
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9873
2021-12-06 15:54:49 +00:00
34a0d1947a
pcbnew Flip: Filter selection for free pads, select footprint instead
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9875
2021-12-06 14:34:26 +00:00
4b226b8172
Unify our breakTracks routines
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9793
2021-11-27 06:34:47 -08:00
ba6ae4fa9b
Kicad has many plugins. This one is for the pcb.
2021-11-25 12:56:46 +00:00
f97c7c78c8
Connect ruler tool with axes preferences
...
Adds "UpdatePreferences" action that is called when the preferences are
updated, allowing running tools to act on changes that may affect them
Fixes https://gitlab.com/kicad/code/kicad/issues/9737
2021-11-23 12:52:21 -08:00
8777ce3d4e
TEMP_SELECTED is in m_flags, not m_status.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9610
2021-11-21 23:52:45 +00:00
cf1d5f5724
Teach selectConnectedTracks() about layers.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9610
2021-11-21 13:53:43 +00:00
229706b48a
Formatting.
2021-11-21 13:53:43 +00:00
1d2fd6d271
Change persistent 45° state to only drawing
...
Move/edit points have a lossy state that holds only for the time in
which the tool is active. It reverts back to non-constrained after
completion of the move/point edit
Fixes https://gitlab.com/kicad/code/kicad/issues/9574
2021-11-17 15:38:28 -08:00
53f5d616aa
Coverity issue fixes.
2021-11-13 11:38:31 -05:00
381da21609
Don't inc/dec to netclass track width value.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9622
2021-11-12 17:50:34 +00:00
0631c8fc74
Fix logic bug when updating circular pad points.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9576
2021-11-09 13:14:24 +00:00
75d75799f7
Move to getters/setters for aux and grid origin
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8836
2021-11-08 22:36:40 -05:00
d0014a307d
Reduce the artificial gravity for selecting vias by a bit.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9563
2021-11-08 20:53:59 +00:00
3c78bf4ef8
One active point at a time.
2021-11-01 16:17:33 +00:00
e3ef101ec9
Add missing view controls for FP Editor Appearance Manager.
2021-10-31 16:33:03 +00:00
4afb59fda0
Added feature to switch between router modes
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9414
2021-10-28 22:46:05 +00:00
1dbe8442b1
fp editor: fix crash (null pointer) when trying to drag an item.
...
(there is no roter tool in fp editor)
Fixes #9476
https://gitlab.com/kicad/code/kicad/issues/9476
2021-10-28 11:51:04 +02:00
a79a221257
Array creator tool: Add option to assign unique reference designators
...
ADDED: Option to assign unique reference designators to footprints
created with the array tool [pcbnew]
CHANGED: Array creator dialog no longer displays pad numbering properties
when in the board editor. [pcbnew]
Fixes https://gitlab.com/kicad/code/kicad/-/issues/2354
2021-10-25 22:38:49 +01:00
ea4e06124e
Edit library footprint command
...
Provides missing PCB_ACTION for the edit library footprint command. This is
needed for python control of the command
Fixes https://gitlab.com/kicad/code/kicad/issues/9454
2021-10-25 09:25:37 -07:00
8a3bc3fe4d
Don't translate empty strings
...
The _( "" ) msgid is reserved in gettext, so we need to avoid it in code
2021-10-25 06:24:06 -07:00
c9d858eaf5
Add status bar message for constraint mode.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9282
2021-10-24 14:04:12 +01:00
3b18dce911
Remove vestigal setting
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9444
2021-10-23 22:12:25 -04:00
e950278637
Don't initiate a drag if the router is already active
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9277
2021-10-23 19:01:25 +01:00
e30d867439
Use consistent terminology for various constraint modes.
2021-10-23 12:18:08 +01:00
fecb53b64f
Clean up removal of separate front & back footprint text visibility.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9441
2021-10-22 21:14:15 +01:00
8cbdf5ba12
Keep default pad number up-to-date (in both directions).
...
Also hides the net selector when in the footprint editor as it has
no meaning there. (We still only grey it out for the board editor
when the pad type has no net to keep things from coming and going too
much.)
Fixes https://gitlab.com/kicad/code/kicad/issues/9317
2021-10-22 19:58:36 +01:00
463b82cf46
Be very careful when "doing what I mean".
...
Just wanting a SMD pad isn't enough -- the user may have already
set SMD settings into the master pad and changing the SizeX is
then very unexpected. Make sure the settings directly conflict
before making any "do what I mean" adjustments.
Also fixes the parent-footprint info when no parent exists.
Also gives a better title to the dialog when used to edit the masterPad
properties.
Fixes https://gitlab.com/kicad/code/kicad/issues/9427
2021-10-20 08:59:25 +01:00
fb5fef9f5f
Remove extraneous Raise() from DRC cross-probe
...
Scroll-to-show on GTK relies on the idle handler but this is interrupted
by a Raise and not revisited. Since the Dialog is always on top of the
editor, Raise is not needed to view the referenced error
Fixes https://gitlab.com/kicad/code/kicad/issues/7246
2021-10-18 17:16:36 -07:00
5af813c69f
Remove extra handler
...
The extra handler intercepted the action before it could be handled
properly changing the board design settings
Fixes https://gitlab.com/kicad/code/kicad/issues/9410
2021-10-18 15:08:22 -07:00
f9861b4a6c
Finish arc rework and push out to file formats.
2021-10-15 12:45:43 +01:00
9b9e379aa0
Overhaul arc internal model to not over-specify information.
2021-10-15 12:45:43 +01:00
8b08c9e53f
Shorter names before things get out of hand.
...
Also, remove comments indicating CURVE is a Bezier. Just call it a
BEZIER.
2021-10-15 12:45:43 +01:00
a41944020d
Push most of PCB_SHAPE impl down in to EDA_SHAPE.
2021-10-15 12:45:43 +01:00
0533196294
Fix Coverity warnings
2021-10-15 09:24:16 +02:00
5a6f230a2c
Delete full track needs proper scoping
...
This should not run if the action is "Cut". Additionally, we need to
transfer the expanded selection to selectionCopy in order for it to
proceed with the deletion. There is also no need for this to be limited
to the Hover action, so this section was removed.
Fixes https://gitlab.com/kicad/code/kicad/issues/9385
2021-10-12 13:47:16 -07:00
93bbad6acf
Allow snapping in pickReferencePoint
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9354
2021-10-10 08:53:10 -07:00
62cb5d9354
Fully cancel copy with reference
...
Tool needs to be popped when cancelling to allow selection tool to work properly.
Fixes https://gitlab.com/kicad/code/kicad/issues/9353
2021-10-10 08:31:18 -07:00
4d89061d4c
Support footprint arcs in convert to polygon
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9352
2021-10-10 16:26:23 +01:00
6620831d38
Clear edited point when exiting point editor
...
Failing to clear this will prevent selection where tools check for
edited points before processing mouse button down events
Fixes https://gitlab.com/kicad/code/kicad/issues/9357
2021-10-10 08:25:50 -07:00
8d71bdc3e1
Cleanup unit handling in the stackup drawing tool
2021-10-08 22:30:20 +01:00
51d3440c38
Use footprint type to inform new pad type
...
Makes usage cleaner. If the user specifies that they are creating an
SMD, they should get SMD pads by default so that they don't have to
change them later.
Fixes https://gitlab.com/kicad/code/kicad/issues/9333
2021-10-07 11:10:26 -07:00
1bb5fc3fd6
Work around EnsureVisible bug in wxWidgets during DRC cross-probe.
...
Also adds double-click-marker to open DRC dialog and select marker
in list.
Fixes https://gitlab.com/kicad/code/kicad/issues/7246
2021-10-06 11:17:03 +01:00
9a8d1246cc
We don't keep a CHANGELOG.TXT
...
Direct interested readers to AUTHORS.TXT instead.
2021-10-05 19:46:53 -07:00
ffd6fde700
Improve consistency and hotkey access in Appearances.
...
Added hotkey for cycling through net & netclass color modes.
Added hotkey for cycling through ratsnest layer visibilities.
Added code to display hotkey (if set) on the above and on high-contrast
cycle.
Fixes https://gitlab.com/kicad/code/kicad/issues/9312
2021-10-04 13:44:43 +01:00
930c4e5582
Cleanup.
...
Formatting.
Naming conventions.
Use of auto.
Use of STL cover types.
2021-10-03 19:42:29 +01:00
5c402a64ab
Use mathematical rotation direction in Move Exactly dialog.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/1897
2021-10-03 00:11:01 +01:00
e2baacec21
Add cross-probing between PCB (markers) and DRC marker list.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7246
2021-10-02 23:39:45 +01:00
da79a3dd69
Option graphics limited to 45deg in creation: separate options for brd and fp editors.
...
Add these options in PANEL_EDIT_OPTIONS.
This option was previously living only in some context menus, not really visible.
2021-10-02 16:43:31 +02:00
dd1d36d40a
Fix segfault when check for editing points
...
The point editor is not always available when checking for points. We
need to handle the missing tool without crashing
2021-09-30 17:25:33 -07:00
12b726ba2f
Prevent the point editor from fighting with other tools.
...
1) Don't start a long-click timer when the point editor is active.
2) Don't auto-start a wire when the point editor is active.
Fixes https://gitlab.com/kicad/code/kicad/issues/9270
2021-09-29 19:16:06 +01:00
0438a45176
Don't allow reentrancy into PlaceFootprint.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9269
2021-09-29 17:01:33 +01:00
3b6da14614
Don't allow offset for circular pads.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9266
2021-09-29 15:27:34 +01:00
07e01e6297
Allow converting graphic arc to track arc
2021-09-28 21:00:15 -04:00
d90dc77e00
Selection: Don't drop small moves
...
If we do a real drag, the timer will be cancelled. If we don't, then
the user is still holding the mouse button down and would probably like
to see the menu. Otherwise it appears the action is dropped.
2021-09-27 16:44:32 +00:00
726f9ebe3d
Pcbnew: Router tool should not block drag selection when idle
...
The other drawing tools allow drag selection while idle. Also, it makes
it more obvious to the user when accidentally drag selecting while
routing than just doing nothing on a drag with the routing tool selected
and idle.
2021-09-27 16:05:13 +00:00
544fa939f8
Lock/unlock group members when locking/unlocking group.
...
Also moves the stateful selection filter to after the hierarchy filter
since the hierarchy filter might swap a pad selection for a footprint
selection.
Fixes https://gitlab.com/kicad/code/kicad/issues/9255
Fixes https://gitlab.com/kicad/code/kicad/issues/7542
2021-09-27 11:29:52 +01:00
5f3c67bd2b
Fill in some missing GetMsgPanelItems and make some others consistent.
...
Also expunges a std::vector<MSG_PANEL_ITEM> cover type.
2021-09-27 00:23:40 +01:00
a3dcdd4887
Allow highlight-net to work on zone copper.
...
We were already checking zones separately (after tracks and pads); we
just weren't setting the flag that causes the COLLECTOR to also test
zone fills.
Fixes https://gitlab.com/kicad/code/kicad/issues/5924
2021-09-26 19:26:22 +01:00
77f47b6e47
Avoid assertion in some cases.
2021-09-26 10:54:50 +02:00
9f64850325
Drawing stackup table: fix a few issues and missing items.
...
Fixes #9243
https://gitlab.com/kicad/code/kicad/issues/9243
Fixes #9244
https://gitlab.com/kicad/code/kicad/issues/9244
2021-09-26 10:31:41 +02:00
bf145dd633
Confine allow-locked-pad-selection-even-when-filtered to single-select.
...
Also make sure text in a locked footprint is not selected if the locked
items filter is unset.
Fixes https://gitlab.com/kicad/code/kicad/issues/9227
2021-09-24 18:58:22 +01:00
140e4cbe28
Avoid assertion on 2-layer board
...
New boards may have INVALID_LAYER inbetween F_Cu and B_Cu in the
stackup. Skip these and any layer values beyond what we store currently
2021-09-22 12:37:17 -07:00
84864351c7
Fix units naming in stackup
...
We were not handling the new mils/inches division in stackup table
Fixes https://gitlab.com/kicad/code/kicad/issues/9210
2021-09-22 12:30:02 -07:00
2ec1c215cd
Drop selection after hiding items.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8605
2021-09-21 17:02:34 +01:00
3651d7c5e7
Remove vestiges of old zoom-auto architecture.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9055
2021-09-19 18:32:15 +01:00
847c9e32c8
Don't allow the draw via tool to activate in the footprint editor
...
Fix #9186
2021-09-17 23:01:16 -04:00
b84d1456d5
KIFACE_I -> KIFACE_BASE.
2021-09-14 23:45:14 +01:00
32e23d993e
Formatting.
2021-09-13 17:18:58 +01:00
fdfecf5932
Don't push view control settings to the previous active tool.
...
See further comments in bug report.
Fixes https://gitlab.com/kicad/code/kicad/issues/9147
2021-09-13 13:28:05 +01:00
3316f3998a
Rename BuildPolyPointsList() to DupPolyPointsList() and optimize code
...
to avoid multiple useless copies of the list of polygon corners in code.
2021-09-11 14:21:36 +02:00
29c2f3b7d4
Prevent jumping into disambiguation if moved
...
Moving points should not be overrided by disambiguation menu, so we
track where the disambiguation event started and only trigger the menu
if the mouse hasn't moved a full unit in x/y
Fixes https://gitlab.com/kicad/code/kicad/issues/9132
2021-09-09 16:24:18 -07:00
f0a26e4be0
Attempt to fix long-click issue (possibly just a typo).
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9124
2021-09-09 12:20:30 +01:00
c8b2e69332
Check if selection is primary tool
...
Previously, we were checking if the selection tool was the top of the
stack but this ignored many other "secondary" tools that might be
running such as the point editor. These still allow the selection tool
to handle events such as clicks. This change allows the selection tool
to handle clicks when it is the primary tool on the stack rather than
the top
Fixes https://gitlab.com/kicad/code/kicad/issues/9110
2021-09-07 10:42:01 -07:00
0e3c79d3b2
Remove inappropriate icons
...
Icons should be used sparingly to draw attention to the most used actions
2021-09-06 21:23:52 +00:00
0f38a35531
Be sure to stop the timer when triggering d-click
...
Some mice apparently trigger double-click without triggering a click, so
stop the timer when we receive this event
Fixes https://gitlab.com/kicad/code/kicad/issues/9106
2021-09-06 12:27:31 -07:00
343dbf0f5b
Change default 45° hotkey to shift-space
...
This requires enabling the space key to be bound with shift, which was
disabled based on an overbroad limit of only allowing shift to be mapped
with letter keys
2021-09-06 12:18:29 -07:00
56ccaf6482
Constrain move tool when set
...
Move tool works slightly differently from other tools when figuring out
new locations. This uses the global 45 enable flag to set proper item
locations when the user is requesting a 45° constraint on movement
2021-09-06 07:05:25 -07:00
86725db758
Ensure doInteractivePlacement enforces snap option
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9105
2021-09-06 06:36:33 -07:00
240c3b75c4
Move selection disambiguation to long-click
...
This standardizes selection tools in SELECTION_TOOL class to be able to
handle a long-click as asking for a non-heuristic disambiguation menu.
Fixes https://gitlab.com/kicad/code/kicad/issues/8490
2021-09-05 13:42:51 -07:00
092cdc0bb5
Move 45° limit to hotkey
...
This assigns the "Tab" key to a general pcbnew 45° limitation. Limit
can be enabled/disabled using context menu as well.
Removed the user preference for 45° limitation on graphic lines as that
is overlapping with the general limitation, which is not an editing
preference so much as a temporary adjustment to tool action.
Related to https://gitlab.com/kicad/code/kicad/-/issues/8490
2021-09-05 13:42:51 -07:00
e03257b55f
Allow close placement of stitching vias
...
When placing a stitching via for a bypass capacitor, it is common to
place it close to the relevant pad. If the via does not have the
correct net, this will violate DRC and be prevented.
Checking for zone-based net assignments allows the workflow to proceed
2021-09-01 15:52:35 -07:00
8a305eec32
Remove broken RefDesStringCompare
...
This function attempted a poor-man's natural compare but it assumed
specific structure of the string. This broke for strings with
numberings that looked like decimals.
Instead, we use our natural string comparison function and remove the
references to this older function and its similar elements.
Fixes https://gitlab.com/kicad/code/kicad/issues/9067
2021-09-01 11:48:01 -07:00
6c7c9ca50c
Fix compil warnings (UNDO_REDO::GROUP renamed to UNDO_REDO::REGROUP to fix
...
collision name with a widows header on msys2)
2021-08-28 11:44:01 +02:00
10247c268e
Pcbnew: implement Find Next
...
Moves all of the find dialog control out of the selection tool similar
to the schematic editor. Dialog is also non-modal now to match the
schematic editor.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8966
2021-08-27 18:15:36 +00:00
e6ca9837a2
Clear numbers from non-numberable pads and don't run DRC on them.
...
This was also the last straw on the misnamed PAD::GetName() and
PAD::SetName(), which are now PAD::GetNumber() and PAD::SetNumber().
Fixes https://gitlab.com/kicad/code/kicad/issues/9017
2021-08-24 01:03:06 +01:00
db5ce824af
Use wildcard routine for extension matching
...
Move STEP export dialog wildcard to extension matching
2021-08-20 17:24:05 -07:00
5574682d44
Fp editor: minor fixes:
...
- do not show the paste special context menu: it has no sense in this editor
- Paste command: fix incorrect rotation of pasted FP texts
2021-08-18 17:43:10 +02:00
82849eda42
Fp editor: fix some crashes when trying to duplicate referece or value texts.
...
Fixes #8990
https://gitlab.com/kicad/code/kicad/issues/8990
2021-08-18 15:34:32 +02:00
9ae9301b46
Fix shadowed variable.
2021-08-17 12:54:14 -04:00
8b5f393804
DRC bug fixes and debugging improvements.
...
1) Don't wait for UpdateUserInterface to build the (global) list of
layer names.
2) Report clearance resolution between a silk layer and a mask layer.
3) When writing DRC reports, include info about the violating rule.
4) Report "no relevant layers" if we fail to find anything to write
a clearance resolution report about.
Fixes https://gitlab.com/kicad/code/kicad/issues/8963
2021-08-17 15:41:12 +01:00
1ec70d30af
Cherry-pick some 7.0 Clearance Resolution improvements.
...
6.0 will be in the field for a long time, and the better the debugging
tools we have available the less costly it will be to maintain.
Fixes https://gitlab.com/kicad/code/kicad/issues/8961
2021-08-15 19:03:58 +01:00
41619ebbe2
Decouple PROGRESS_REPORTER interface from implementations.
2021-08-14 21:05:49 +01:00
5bfafa5e4c
Add rounding epsilon to convert tool polygon search
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8927
2021-08-12 20:17:04 -04:00
02e7d9f809
pcbnew: swap x/y align text to match vertical/horizontal text on right click...
2021-08-12 13:03:52 +00:00
a208dac8d8
Convert hole clearance tests from NPTH holes to all holes.
2021-08-09 22:26:00 +01:00
a90656900a
Allow creating polygon types from polygons
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7302
2021-08-08 20:29:00 -04:00
3beeb52c43
Convert tool: create lines on active layer, not source layer
2021-08-08 15:12:23 -04:00
bafa105ed0
Enforce hole clearance on NPTHs in zones.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8924
2021-08-06 18:16:38 +01:00
77680eba30
Naming conventions.
2021-08-05 14:31:36 +01:00
5bf0b99813
Capture errant mouse-up from locked dialog in move tool.
...
Don't pass it on to other tools where it causes all kinds of mayhem.
Fixes https://gitlab.com/kicad/code/kicad/issues/7255
2021-08-04 17:42:40 +01:00
46bdce2747
Don't allow pads in groups in the board editor.
...
Bad stuff happens, including crashes.
2021-08-04 13:55:42 +01:00
65f6e72b4c
Improve commenting.
2021-08-04 13:55:42 +01:00
c5e195bdff
Cleanup (includes and formatting).
2021-08-03 18:37:23 +01:00
c51b1dad72
Generalize infobar MESSAGE_TYPE handling and use for DRC errors.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8782
2021-08-01 21:51:39 +01:00
8aea2cbd03
When ignoring click events don't ignore synthetic ones.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7255
2021-07-29 18:07:04 +01:00
9271ac1a4f
Don't allow deletion of pads when not in allow-free-pads mode.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8884
2021-07-29 16:03:25 +01:00
6aaf4413b3
Fix kicad_string.h / string.cpp mismatch.
...
They don't define a KiCad string class, so the header file name was
somewhat misleading. But the fact that they didn't match definitely
made coding more difficult.
2021-07-29 16:03:25 +01:00
f221220fe2
Rename layer ids file.
...
It hasn't had anything to do with colors or visibility for some time
now.
2021-07-29 16:03:25 +01:00
f233f4a0a9
Expunge EDA_FILE_SELECTOR.
...
EDA_FILE_SELECTOR was just an obfuscation of wxFileSelector().
2021-07-28 14:12:51 -04:00
1f2e7a94ca
Change Move Exactly hotkey to Shift + M to avoid OSX minimize.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8864
2021-07-27 18:20:32 +01:00
dd5676f4bc
Implement a safer (RAII) tool re-entrancy guard.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8873
2021-07-27 16:37:34 +01:00
886dc2f43e
Do-not-show-again section for common prefs & zone fill warning infobar.
...
Note that the dialogs which have mutliple options were not moved over
as it seems perahps not the right choice to have them save state between
sessions.
Fixes https://gitlab.com/kicad/code/kicad/issues/8762
2021-07-27 15:15:49 +01:00
c74148fa88
Add infobar for those who confuse zone filling with display modes.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8762
2021-07-27 15:15:49 +01:00
78e5e98ea0
Pass VECTOR2I objects by reference instead of on the stack.
2021-07-27 08:41:27 -04:00
8fd83cbb95
Pass wxPoint objects by reference instead of on the stack.
2021-07-26 15:35:33 -04:00
e62969d007
Move zone fracture display mode to AdvancedCfg, and add triangulation.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8762
2021-07-26 18:57:35 +01:00
cb917e4c42
Avoid nonsensical intersections
...
When two segments are approximately parallel, we shouldn't look to find
their intersection. It will never be the nearest point and it overflows
the KiROUND call
Fixes https://gitlab.com/kicad/code/kicad/issues/8858
2021-07-26 09:02:54 -07:00
dd31a5383b
Added the double click to footprint editor
2021-07-24 08:53:09 +00:00
8d1dd1f8b0
Handle pad->custom conversion more closely
...
When converting pads to custom polygons, avoid padding with the polygon
width and keep the anchor pad within the boundary of the original pad
itself
Fixes https://gitlab.com/kicad/code/kicad/issues/8842
2021-07-22 12:12:42 -07:00
0fb864d596
Pull some name changes back from 7.0 to ease merging.
2021-07-21 20:58:59 +01:00
cf00319c85
More NULL expunging.
2021-07-20 07:27:18 -04:00
75190370dd
Convert -> Create from Selection
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8818
2021-07-19 18:45:33 -04:00
e61822c9e0
Naming conventions and a bug fix on arc points.
2021-07-19 13:17:12 +01:00
9cb4c9bfc2
3D viewer: ensure the activity messages are displayed on Linux after Frame creation.
2021-07-19 10:10:25 +02:00
f0513978ff
Back-port some fixes from 7.0 branch.
2021-07-13 17:24:23 +01:00
0446d35f0d
Fix source comment/doc typos (follow-up)
...
Found via `codespell -q 3 -S *.po,./thirdparty -L aactual,acount,aline,alocation,alog,anormal,anumber,aother,apoints,aparent,aray,dout,einstance,modul,ot,overide,serie,te,,tesselate,tesselator,tht`
2021-07-13 10:48:17 +00:00
e02bb80bf3
Handle cancel when selecting copper layer.
...
Also changes the algorithm to ask only once, rather than one per
non-copper-layer object.
Fixes https://gitlab.com/kicad/code/kicad/issues/8767
2021-07-10 12:05:25 +01:00
046fb58183
Better command names and tooltips for zone fill/unfill commands.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8762
2021-07-09 22:13:50 +01:00
04ff8cde5e
Drag & Fillet Tracks: Ignore mouse up / click events until move / drag
...
Ensures that any click/mouse up events generated after clicking "OK"
in the "Override locks" dialog are ignored.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8123
2021-07-05 20:29:25 +01:00
ce8132bf4f
Arc Track Drag & Fillet Tracks: Copy lock status to new track(s)
2021-07-05 20:29:25 +01:00
67762a11f6
Don't double-process arcs if we get one first
2021-07-04 12:22:52 -04:00
b291f36dae
ADDED: Convert tool can create polygons with arcs from contiguous line and arc segments
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/5409
2021-07-04 12:10:59 -04:00
175b474c3e
Coverity issue fixes.
...
Fixes issues #280412 , #314755 , #329615 , #332459 , #332157 , #332167 ,
2021-06-30 18:08:49 -04:00
0d8f0d361e
Allow aligning pads in FP editor when locked
...
Locking is not a concept in the footprint editor. The signature for
checking is slightly different in the alignment tool, so we need to move
the check higher to allow aligning items in fpeditor
2021-06-29 16:48:31 -07:00
9a865b1989
Fix a typo and a minor compil warning
2021-06-28 14:37:35 +02:00
81fc710a5d
Use consistent terminology.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8681
2021-06-26 10:11:41 +01:00
95ab53d119
pcbnew: fix missing layer names and missing layers in stackup table
2021-06-24 08:52:51 +00:00
27e9750507
Pcbnew: fix footprint selection bug.
...
Do not remove footprint objects from list of selected objects when there
are no drawable objects other than the reference and value text.
Increase the minimum size rectangle for footprints from 0.025mm to 1mm
when the footprint has no drawing objects so that it is easier to select
the footprint in this case.
Add some pretty colors to the footprint bounding box and hull outline
so that it's possible to tell the difference between selection areas.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8379
2021-06-23 19:46:33 -04:00
5fa5a73c6d
File open/import progress dialogs.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6864
Fixes https://gitlab.com/kicad/code/kicad/issues/2166
2021-06-23 23:55:54 +01:00
7efca0113d
Reset m_inDrawingTool on exit.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8653
2021-06-22 13:02:45 +01:00
de4eb1fcef
Convert to zone: take dest layer from editor active layer
...
Show non-copper zone properties if active layer is non-copper
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8646
2021-06-20 15:13:18 -04:00
b72545a432
Implement more aggressive re-entrancy blocking for drawing tools.
...
A similar strategy was already implemented in Eeschema.
Also adds some safety around clearing of autopan and mouse capture.
Fixes https://gitlab.com/kicad/code/kicad/issues/6909
2021-06-20 11:09:55 +01:00
89718dd3ba
Naming conventions.
2021-06-19 19:36:53 +01:00
c6606a0582
Hook up delete to undo last segment when routing.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8362
2021-06-19 11:37:20 +01:00
f8e9542004
Fix crash when opening board setup after zone filler exits
2021-06-18 12:23:12 -04:00
e540752640
Allow all selected footprints/symbols to be changed.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7389
2021-06-17 23:34:56 +01:00
c8444913df
Implement lock between zone filler and drc.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8621
2021-06-16 16:12:01 +01:00
5bb6b1a3cc
Minor cleanup.
2021-06-12 11:39:28 +01:00
096e342386
Prefix TRACK, ARC and VIA.
2021-06-11 22:07:02 +01:00
16b0147af8
Prefix DIMENSION types.
2021-06-11 17:59:44 +01:00
f968fc8719
Fix source comment / documentation typos
2021-06-09 19:32:58 +00:00
10e60acf34
Clean up including of board_design_settings.h
2021-06-06 15:03:42 -04:00
dc27079b71
cleanup tool event and tool action includes
2021-06-06 18:26:26 +01:00
86add3bb85
Fix MSVC C4312 warnings when casting 32bit ints to pointer types on 64bit builds
2021-06-05 02:57:51 +00:00
d32d107923
Fix local ratsnest tooltip to mention "toggle".
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8415
2021-06-04 23:17:54 +01:00
d8499e4914
I fixed the wrong typo in 6e272429, heh
2021-06-03 22:39:14 -04:00
6e2724294a
Fix typo in action description
2021-06-03 21:27:28 -04:00
4f05262705
Cleanup includes in board.h and footprint.h
2021-06-03 20:19:52 +01:00
23f8851409
Remove pcb_group include from board header
2021-06-03 20:03:31 +01:00
4df3cb912d
Remove another leaky wx/log.h header
2021-06-03 08:11:15 -04:00
63cc7d16b4
Repair board on open
...
We need to ensure that boards do not have duplicated KIIDs, so we repair
the duplicates when opening an existing file. This does not change the
file on disk until saved
2021-06-01 13:39:59 -07:00
bf1437899e
Add Python Tool to pcbnew
2021-06-01 20:18:24 +00:00
f274a00c08
Remove PYTHON_* compile options
2021-06-01 20:18:24 +00:00
c4cabb38d5
More worksheet -> drawing sheet cleanup.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8516
2021-05-31 12:26:44 +01:00
0598c82972
Terminology (use present tense for flags).
2021-05-31 12:26:44 +01:00
8e2fb1bdb9
Treat Cut like a Delete while in a Move.
...
Also fixes problem where second action wasn't getting executed because
the event was getting eaten.
Fixes https://gitlab.com/kicad/code/kicad/issues/8072
2021-05-29 22:10:43 +01:00
eff9746f34
CHANGED: Net highlight in PcbNew is now persistent to match Eeschema
...
CHANGED: Highlight net tool changed to highlight display toggle; moved to left toolbar
CHANGED: Multi-net highlight is now accessible when using the highlight net action
ADDED: Highlight Net and Clear Highlight actions to Net Tools context menu
ADDED: Default hotkey (Ctrl+`) for toggling net highlighting
The current and previous net highlight state are now stored and can be toggled
on or off with an action (no hotkey by default).
Highlight is now treated as a persistent state rather than a tool that is entered,
meaning there is no longer a special tool to enter in order to highlight nets.
Highlighting can be controlled while any other tool is active using the hotkeys
or context menu on a net object.
Tweak the icons for highlight net and layer display mode to better disambiguate them.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8250
2021-05-29 12:40:24 -04:00
752ae4d519
Rename modification flag routines
...
Differentiates better between the EDA_ITEM IsModified(), referring to
items themselves changing and the EDA_SCREEN IsContentModified(),
referring to whether we have made any unsaved changes.
2021-05-28 12:07:04 -07:00
64cd401bdb
Delete Tool: Fix missing "Item Locked" popup
...
Fixes problem identified in https://gitlab.com/kicad/code/kicad/-/issues/8392
Removes same popup from schematic tool because SCH_ITEM can not be locked
2021-05-27 05:38:51 +00:00
4fb643df93
Update POINT_EDITOR when locking/unlocking via Hotkey/RMB.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8489
2021-05-26 16:03:35 +01:00
ba73456d49
Allow point editor to persist
...
After drawing a graphic, allow the control points to persist when
exiting the tool.
The effect of this is to make the first "Esc" press a
"return-to-select-tool" event without modifying the selection or control
points from within the drawing tools. The section "Esc" press, when in
the selection tool will clear the selection and the control points
2021-05-25 16:47:54 -07:00
5c9a73aa5e
Correct position for grid even when we're not snapping to a point.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8125
2021-05-25 21:57:19 +01:00
0eed73ea73
Make PCB_POINT_EDITOR honour locked flag.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8254
2021-05-25 18:13:24 +01:00
baf868fce7
Add footprint repair tool (currently just for duplicate IDs).
2021-05-21 17:52:11 +01:00
0d8a9a1091
Make sure that a tool never exits with autopan or capture.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8459
2021-05-21 14:53:58 +01:00
3de60231db
Allow clearance debugging of exact items in DRC violation.
...
ADDED: Run clearance resolution tool... RMB menu item to DRC
clearance errors.
Fixes https://gitlab.com/kicad/code/kicad/issues/8438
2021-05-21 00:00:24 +01:00
75f49ba1b6
Add length tuner settings to toolbar context menu
2021-05-12 02:34:52 +00:00
34145d8170
Add length tuning menu to vertical pcb toolbar
2021-05-12 02:34:52 +00:00
c49af57c2a
Don't require a restart to get the current m_Live3DRefresh setting.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8349
2021-05-11 15:07:52 +01:00
7356f9568d
Move grid disable modifier from ALT to CTRL.
...
Also had to move the H/V/45 disable modifier from CTRL to SHIFT.
Fixes https://gitlab.com/kicad/code/kicad/issues/8124
2021-05-09 20:17:40 +01:00
a5ff27cae7
Pcbnew, EDIT_TOOL::GetAndPlace(): fix and issue, and allows execution only if
...
called inside the board editor.
Fix also a broken behavior: the current action was not cancelled, and if it is
called during a move items (when typing the 'T' key), items were broken.
The actual bug is the fact it is called also in fp editor and footprint wizard frame,
because it is part of EDIT_TOOL action list, common to fp editor, and should not.
But a full change is much more costly than just a filter.
2021-05-09 11:51:57 +02:00
aaffd0c137
Pcbnew: fix crash due to a not tested null pointer.
...
Fixes #8369
https://gitlab.com/kicad/code/kicad/issues/8369
2021-05-07 10:35:00 +02:00
094dd2e08c
pcbnew : rotate relatively to selection center
2021-05-04 09:13:20 +00:00
f2677340f2
Access the new paste behaviour via a new Paste Special... dialog
...
ADDED Paste Special... action in pcbnew
CHANGED Additional options for Paste Special... in eeschema, including
"Assign unique reference designators to pasted instance"
2021-05-03 19:38:32 +01:00
98c8f43320
eeschema and pcbnew paste: consistent paste behaviour
...
Duplicates are reannotated on paste in the same way in pcbnew and
eeschema such that when copying and pasting the same block in the
pcb and schematic, the reference designators will match.
2021-05-03 19:38:32 +01:00
0427bda768
Remove useless wx/wx.h include, that create sometimes compil warnings on msys.
...
wx/wx.h includes all wxWidgets .h files, and sometimes creates collision
names in #define between kicad and windows headers
Moreover, blindly including a lot of useless files is compil time consuming
2021-05-01 19:32:15 +02:00
03cf2b517f
Enum class PAD_ATTR_T
...
Renamed such that python stays the same
2021-05-01 10:51:54 -04:00
b243c2280d
enum class PAD_SHAPE_T
2021-05-01 08:22:35 -04:00
21fde9b629
enum class PCB_SHAPE_TYPE_T
2021-04-30 22:36:12 -04:00
91421f9908
Separate logic for multi-select and click-select when filtering.
...
Also removes a bunch of old implementations of pad locking and
filtering which are no longer needed. (They're now handled by the
uniform locking code.)
Also removes some of the auto-promotion logic. Rotating a footprint
when a pad was selected is going to be surprising whether the pad
is locked or not.
Fixes https://gitlab.com/kicad/code/kicad/issues/8322
2021-04-29 00:07:35 +01:00
78b555afa2
Filter Select All event against hierarchy
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8316
2021-04-27 16:58:45 -07:00
5bf37a9b24
Don't allow selection crossing a parent/child relationship.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8292
Fixes https://gitlab.com/kicad/code/kicad/issues/7255
2021-04-26 18:47:44 +01:00
e6bf922a77
Make sure connectivity is locked for zone filling.
...
See 1e33928b96
2021-04-25 18:09:53 +01:00
7569fc8aad
Bring back live move of footprint in 3D view if live refresh is on
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8220
2021-04-22 22:32:41 -04:00
37dd4038eb
Display options can change during the picker lifecycle
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7133
2021-04-12 22:12:48 -04:00
a4c08e2af6
Apply Eeschema cursor updating architecture to PCBNew.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8135
2021-04-12 11:11:11 +01:00
cc956695ae
Hit test for worksheet before adding Properties to menu.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8171
2021-04-11 14:18:35 +01:00
dc0cf3b802
Clean up a confusing API.
...
AllowDRCViolations is kept in any mode as a *setting*, but only
controls router behaviour when the mode is mark obstacles.
Fixes https://gitlab.com/kicad/code/kicad/issues/7795
2021-04-10 11:08:02 +01:00
43d8145304
Pcbnew: Snap to the closest point on graphic polygon border
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8164
2021-04-09 22:33:55 +00:00
619a353c5e
Decouple 3D view dirty marking and refresh
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8154
2021-04-08 22:09:19 -04:00
d64de3808f
Pcbnew: Snap to group items
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7694
2021-04-08 23:22:19 +00:00
4521091cc1
Do not invalidate geometry when all we need is a repaint
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8157
2021-04-08 17:35:51 -04:00
29cc16a4c4
Push pcbnew layer alpha change update into base frame
...
This code was shared between the footprint frame and
pcb edit frame, so push it into the base edit frame.
Also remove the dummy wxUpdateUIEvents that weren't
actually being used.
2021-04-07 17:39:48 +01:00
3fd3be9843
Layer fixes for PCBNew drawing tools.
...
1) Implement layer changes for dimension drawing tool
2) Ensure drawing layer is visible for (1) and for the text drawing
tool.
Fixes https://gitlab.com/kicad/code/kicad/issues/8106
2021-04-07 15:02:48 +01:00
e50b450092
Formatting and organisation.
2021-04-07 14:50:29 +01:00
211fd65c23
Move: Ignore mouse up and click events until a mouse move / drag event
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8123
2021-04-06 17:29:52 +00:00
09b2db3139
Test for group in footprint was snagging all footprint children.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8121
2021-04-06 18:27:43 +01:00
235688e459
Less restrictive Arc Track Dragging tool
...
Use the connecting straight tracks even if not exactly parallel - allow
an error margin configurable in ADVANCED_CFG (default 1 degree). Also
be less strict about end point matching and use the width of the track
as the criteria to determine suitability.
Finally, delete any short lengths of track at the end of the operation
and amend the arc end points to keep connectivity.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7967
2021-04-06 12:52:01 +00:00
ec45855aed
Make sure drawing layer is visible.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8106
2021-04-06 00:06:23 +01:00
83ae28f04f
Fix selection when pasting/duplicating items
...
The item flags weren't getting reset after placing
the new items, so the next operation on them was
having weird behavior.
Fixes https://gitlab.com/kicad/code/kicad/issues/7528
2021-04-03 19:09:21 +01:00
99fd872fce
Pcbnew: Do not move footprint fields twice in align/distribution tools
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8094
2021-04-02 21:09:36 +00:00
7655533412
Do not move footprint fields twice when performing Move Exactly
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8062
2021-04-02 21:07:59 +00:00
d3bf20e80b
Pcbnew, place free via: take netcode from the pad, if the via is inside a pad.
...
Fixes #8089
https://gitlab.com/kicad/code/kicad/issues/8089
2021-04-02 17:19:44 +02:00
f6f31b7654
Get rid of save warning after Footprint Editor Save As.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8084
2021-04-01 11:17:24 +01:00
7077e59395
Make moving pads independent of footprint much harder with new setting
...
It is still possible to move a pad independent of footprint through
the pad properties dialog. This is a much more conscious decision
than using the move tools.
ADDED: "Allow free pads" preference setting in pcbnew, default to off.
When enabled, allows moving unlocked pads independent of the footprint
(i.e. previous behaviour). When disabled (default), any attempt to move
a pad will move the parent footprint instead.
REMOVED: "Lock pads of newly added footprints" preference setting in
pcbnew. (Pad lock state is now loaded from the footprint definition)
CHANGED: There are now only two possible lock states for a footprint:
locked and unlocked. The lock state of the pads in the footprint is
now independent of the footprint lock state.
Also fixed a latent bug that would allow a pad to be moved when the
parent footprint was locked (see m_selectionTool->RequestSelection
lambdas in edit_tool.cpp)
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7739
2021-03-31 18:28:18 +00:00
0a0935e0f3
Remove ACTIONS::TranslateLegacyId and TOOL_DISPATCHER::DispatchWxCommand
...
After commit 9535153f9e
2021-03-30 23:20:22 +00:00
38c849bde7
Pcbnew: load write board netlist to file tool action dynamically.
...
Loading this advanced configuration option statically will cause it to
show up in the hotkey list even when the option is disabled. Creating
the tool action at run time resolves this issue.
2021-03-29 09:04:55 -04:00
f2e68e68d0
Add "Hide Tree" context menu options when tree has no selection.
...
Also cleans up some other code to be more consistent between symbol
editor and footprint editor.
Fixes https://gitlab.com/kicad/code/kicad/issues/8052
2021-03-29 12:02:00 +01:00
6d2f80b4cf
Pcbnew: add write board netlist to file support.
...
This is hidden behind an advanced configuration setting and is primarily
useful for developers trying to troubleshoot the netlist payload sent
from the board editor to the schematic editor.
Fixes https://gitlab.com/kicad/code/kicad/issues/8051
2021-03-28 08:38:29 -04:00
42c6af4bd8
Cleanup ACTION_MENU creation in some places
...
The ACTION_MENU constructor now takes the tool as an argument,
so the call to SetTool() immediately following it can be removed
and the tool just passed into the constructor.
2021-03-27 19:16:58 +00:00
9535153f9e
Move the import graphics menu item to the action
2021-03-27 19:04:16 +00:00
7bfa8575fa
Remove redundant information from import/export menu item labels
...
Saying "Import/Export" on the labels when the submenu has "Import"
or "Export" in it is redundant.
Note that we can't just update the action text with the new name,
because that is used in the hotkey list and would become too confusing
without the "Import"/"Export" text.
2021-03-27 18:50:35 +00:00
3279e295ac
Don't start filling zones with possibly stale caches.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8014
2021-03-25 17:20:08 +00:00
bbd7b4ca8c
Eeschema, selection tool: uniformize the cursor shape and the actual modifiers.
...
SHIFT, CTRL, ALT modifier keys were handled in 2 different codes, one for
the selection tool and another to modify the mouse cursor shape, with 2
different configs.
Now the modifiers are managed from only one function.
Pcbnew: group also SHIFT, CTRL, ALT modifier keys management to a specific function.
Fixes #8021
https://gitlab.com/kicad/code/kicad/issues/8021
2021-03-25 10:28:20 +01:00
a94a481574
Fix compile warnings
...
Some simple warnings and also a deprecation warning from wx
because they felt that a function should be renamed...
2021-03-23 19:46:49 +00:00
f24f0d93a5
Make OK default in inspectors (and hook up to close window).
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7831
2021-03-22 21:20:54 +00:00
a677998f47
Don't select new items after cancelling move following item duplication
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7956
2021-03-22 18:49:43 +01:00
a9eb83201e
Remove ZONE::ClearFilledPolysList() and fix ZONE::Unfill()
...
ClearFilledPolysList is redundant and Unfill() was missing the clearing
of m_insulatedIslands
This fixes potential latent bugs in zone unfilling.
2021-03-21 20:13:20 +00:00
50aafb9d2a
Do not auto-refill zones when added or edited
...
The only exception is when using the Zone Properties Dialog and
user preference is enabled
2021-03-21 20:13:20 +00:00
f6c4677189
ADDED Option to disable automatic zone filling in pcbnew
...
The new setting is stored as 'editing.auto_fill_zones' and controls
whether zones should be refilled after certain actions or not.
2021-03-21 20:13:20 +00:00
a743e0c52b
Add Zone fill to undo stack
...
Allows undoing zone filling and reverting to previous fill state.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7440
2021-03-21 20:13:20 +00:00
f1c599fa4d
Tweak PCB selection behavior to reduce unintuitive behavior
...
We were discarding shapes too aggressively for having a
larger area than a shape underneath.
Let's also try showing fewer disambiguation menus, in particular
always preferring items on the active layer when the candidates
include overlapping items of similar area on other layers.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7949
2021-03-20 13:11:51 -04:00
Mark Roszko
Mike Williams
Jeff Young
jean-pierre charras
Alex
Seth Hillbrand
Maciej Suminski
luz paz
Wayne Stambaugh
Fabien Corona
aris-kimi
Roberto Fernandez Bautista
Jon Evans
Jonathan Haas
Electro707
Ian McInerney
Michael Kavanagh
Stefan
Pradeepa Senanayake
luz paz
luz paz
david-beinder
Mikolaj Wielgus
Jonathan Haas