- pcbnew should use status bar on success like eeschema
- Add a helper to clear msgpanel and set it in one go to avoid redraw delays due to doing processing in between
Once the help button is clicked, the html help window is created but never destroyed.
It prevent Kicad to be fully closed
(closing Kicad does not fully close Kicad and leave something like a zombie process)
When preparing for clearing the tree, GTK requires walking through
parents. After calling "Freeze()" to protect against returning bad data
(see #6458 and #4471), we can no longer access Parent() from GTK and the
tree cannot be cleared.
The fix is to collapse the first element if it is open. This prevents
the common case of the history elements being expanded in the tree
Fixes https://gitlab.com/kicad/code/kicad/issues/6102
(cherry picked from commit 7eea344f91)
- remove outdated code or comment coming from old drawing code using wxDC
- move zoom values lists to zoom_defines.h
- fix incorrect zoom max and min values (gal scaling factor limits).
1) make sure we get the default netclass when we want it
2) escape for HTML (particularly important for "<invalid>", but also
for reporting user rule names, netclass names, etc.)
1) Separate out CONSTRAINT types
2) Filter both source and dest pads/vias for drilled holes when doing
hole-to-hole checks. We were checking the items being put into the
DRC RTree, but not the items we were scanning.
3) Add hole clearance to Board Setup Constraints panel.
Fixes https://gitlab.com/kicad/code/kicad/issues/6546
Fixes https://gitlab.com/kicad/code/kicad/issues/4683
The new shape architecture gives us the opportunity to make text
selection much more intuitive by actually looking at the glyph
shapes. Before text would be selected when you clicked in the
descenders area (which was usually blank given uppercase letters
and digits).
Fixes https://gitlab.com/kicad/code/kicad/issues/6525
So the new steals-focus protection stuff works well when there's a
focused control, but not as well when there's a modal dialog up which
happens not to have a focused control (or worse, a focusable control).
This adds a second mechanism for also checking to see if a modal dialog
is up (something that wxWidgets, true to form, makes very difficult).
Fixes https://gitlab.com/kicad/code/kicad/issues/6520
The wxWidgets call "ItemDeleted" still requires access to the item in
memory, so we delay deletion by storing removed items to the end of the
call
Fixes https://gitlab.com/kicad/code/kicad/issues/6301
Copy to clipboard save items (using S expr description) using wide strings
(not UTF8 encoding).
But Paste from clipboard was not converting the wide string to UTF8 string
when getting the stored data to send it as std::string to the S expr reader.
Fixes#6449https://gitlab.com/kicad/code/kicad/issues/6449
This allows the parser to properly interpret the sexpr version
of the footprint so that it can throw future format errors or
do version specific parsing properly.
Use wxCOL_WIDTH_AUTOSIZE instead of fixed column sizes. This doesn't fix
the initial sizer layout issue on wxWidgets 3.0 but at least resizing the
dialog has better column width behavior.
Previously the fill for shapes inside a footprint was not being
properly imported from older versions becase the default of no
flag changed from representing filled to representing no fill.
Introduce explicit filling information, and continue to treat no
flag on a polygon as meaning it is filled (which is the legacy
behavior).
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6393
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6390
This function is introduced in wxWidgets 3.1.5 and allows you to
query the event with if it should be checked or not instead of
having to figure it out based on the item type.
* Align the top of the buttons in the palette with the toolbar button
* Don't check the button in the palette, since the toolbar button will
show as checked.
wxWidgets 3.1.5+ on Linux will compile with the Wayland EGL
canvas as the backend instead of the X11 backend. This requires a
version of GLEW compiled with the proper EGL defines and a different
header/code for certain parts that are X11 GLEW specific.
This introduces an in-tree version of GLEW that will be built with the
GLEW_EGL flag then statically linked into the KiCad executables when
EGL support is needed.
When we look for icon scaling, we should be using the wxWidgets
parent as the scaling window not the tool manager's frame (even though
they are probably the same). (this also removes several dynamic_casts).
The accelerator strings really shouldn't be part of the translation,
and some translations have cause the accelerator keys to be incorrectly
handled. It is simpler to make it separate and just join them to the
translated string.
Make all accelerator modifiers use lowercased Ctrl instead of CTRL
to be the same as the other modifiers.
Fixes https://gitlab.com/kicad/code/kicad/issues/5992
This looks like it was always intended for macOS but was accidentally changed for Windows as well.
If this is a requirement on windows, I'm sure theres better ways to fix it....
In some cases, the BeforeReset() will cause an iteration over the tree
elements. If we have deleted an element before doing this, we risk a
corruption/crash.
Fixes https://gitlab.com/kicad/code/kicad/issues/6192
NOTE: because SCINTILLA_TRICKS is using a wxEVT_CHAR_HOOK,
it doesn't get the translated keycodes, so both ` and ~
look like ` to the call to ConvertSmartQuotesAndDashes
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6171
As if the original hack wasn't embarassing enough, the only change
here is to make the number bigger.
WICKED HILLARY wanted to use wxBoxSizers that are FAR TOO SMALL.
So sad.
But we're going to look at that. I think we're going to have
BIG wxBoxSizers. Probably the BIGGEST wxBoxSizers of anyone.
(The bug is that the Sheet Border swatch in PANEL_EESCHEMA_SETTINGS
doesn't otherwise get drawn unless that panel is the one showing
when preferences is opened.)
Correcting the error is more trouble than it is worth, and anyway
might not be corrected exactly the same way plotting/filling/DRC
is corrected anyway.
Use a segment count multiple of 2, because we have a control point on the
middle of the arc, and the look is better if it is on a segment junction
because there is no arc to segment approx error
The radius correction does not fix correctly approximation errors,
and creates serious issues for thin arcs:
- control point outside the arc
- HitTest active area outside the arc shown on screen
- Cairo and opengl gives different arc positions.
- the formula used in radius correction is probably incorrect.
Normally we don't want to resize when a control is open (such as a
drop-down), but it appears safe enough when all the controls are
just text-button controls.
Fixes https://gitlab.com/kicad/code/kicad/issues/6090
It was causing problems with surprising behaviour and issues with
allowing spaces in existing labels. We'll work on something better
for 7.0....
Fixes https://gitlab.com/kicad/code/kicad/issues/6073
Testing reveals 25000 is absolute overkill. A 4mil trace at 2000 is already an entire GAL canvas on 1080p.
Eeschema already uses its own setting of 1000 max.
The groundwork has now been laid for per sheet instance data. Initially
this only supports sheet page numbers but could be expanded to include
other per sheet instance information.
ADDED: Support for user defined schematic page numbers.
The dialog isn't actually movable with the mouse, so all the placement
logic inside DIALOG_SHIM is extraneous and actually causes the switcher
to appear on the wrong monitor if pcbnew was moved across monitors after
it was opened.
Fixes https://gitlab.com/kicad/code/kicad/issues/5789
This leaves them untranslated internally but makes sure their
translation strings exist so they can be dynamically translated
at the GUI level.
Fixes https://gitlab.com/kicad/code/kicad/issues/6020
Error codes can shift around if the enum ordering is
not maintained, which is more fragile than the settings
key which should never be changed after a new code is
created.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6001
Setting a line thickness = 0 for graphic objects (circle, rect, line) is
allowed but creates issues for circles that were plotted a non filled shapes
but having a outline thickness = 0.
CHANGED: When using tools like the ruler, circle, arc, etc, they
display info text. If the view is flipped, the text is also flipped.
This MR fixes the flipped text and also corrects text X offset and
justification to match normal view.
CHANGED: When using tools like the ruler, circle, arc, etc, they
display info text. If the view is flipped, the text is also flipped.
This MR fixes the flipped text and also corrects text X offset and
justification to match normal view.
Iteration on a suggestion from Mikołaj Wielgus to resolve
elusive crashing issue when searching in lib tree in GTK.
GTK issues two commands when clearing (BeforeReset() and AfterReset())
BeforeReset() needs to have a valid model and cannot have selection
events during its lifetime. On MacOS and MSW, this is a NOP.
AfterReset() performs the re-association for GTK, removing the need for
the extra associate step. For MacOS and MSW, this is only the Cleared()
action.
Fixes https://gitlab.com/kicad/code/kicad/issues/5732
Fixes https://gitlab.com/kicad/code/kicad/issues/5891
To avoid issues with broken Gerber readers use aperture macros with shapes
without rotation when more than one primitive is required.
In many gerber readers, rotation of a set of primitives is broken
(do not follow Gerber requirements)
This will always show 1 unit from each system, with the primary unit
being the current frame unit and the secondary unit being the
most recent unit used from the other system. These are saved in
the settings, so they are saved between runs.
* Make the ruler able to switch to mils after creation
* Cleanup an unused flag in Pcbnew dimensions
* Move unit changed notification into EDA_DRAW_FRAME so more
frames to use it.
* Allow switching units when GerbView ruler tool is active
Switch Eeschema to use the built-in printing routines
because its precisions are close to those and it is
cleaner.
Give mils a precision of 2 decimal places to match
the precision shown in inches.
This uncovered a memory corruption bug in MODULE's move operator,
several bugs in MODULE's move and copy constructors, and a bug in
BOARD's GetItem() call.
It also bumps the file format for saving/restoring groups inside
footprints.
Using CopyFile() that can collide with a windows header create hard to
understand errors, including link errors.
Renaming this function avoids these strange errors.
Previously, init order depended on the ordering of the
tool state map, which is opaque from the point of view of
registration. This makes it challenging to make one tool's
init depend on another. With this change, registration
order defines init order.
They're only on screen when they're being used, and we don't have
a GAL available to calculate their actual extents from (since their
text scales with zoom).
Fixes https://gitlab.com/kicad/code/kicad/issues/5845
in most of files, including wx.h is not necessary, when only 2 or 3 wx files must be included.
Moreover, on windows, including wx.h sometimes create compil warnings about
shadowed vars defined in some specific windows headers.
There were issues on OSX where the mouse being captured
by the parent toolbar would lead to seg faults, so release
the mouse on opening the palette.
Releasing the mouse then means that the mouse states become
confused, so we need to manually clear all the mouse states
when we open the popup.
Fixes https://gitlab.com/kicad/code/kicad/issues/5803
Fix compile error
Fix string format to use %ld instead to work on clang in CADSTAR Archive importers
Add virtual destructor to CONNECTION in CADSTAR_ARCHIVE_PARSER
Fixed missing tokens that weren't parsed before:
- Danglers (in NET_SCH)
- Pin numbers (in SYMBOL)
- HidePinNames in both PART and PART::DEFINITION, defaulting it to false
plotter.h contains now only a header common to all plotters.
The code does not actually change, but it allows modifying a specific plotter
without recompiling most of kicad files.
CHANGED: GetDocumentExtents() in 'eda_draw_frame.h' now has a bool
parameter "aIncludeAllVisible" with a default value "true" which makes
it behave as it did before adding parameter. If "aIncludeAllVisible"
is false, the returned bbox ignores some items depending on which
program it is running in.
CHANGED: Made "Zoom to Objects" use only PCB edge in Pcbnew. This
allows text, notes, etc outside the PCB edge to be excluded in the
zoom calculation.
CHANGED: Added "Zoom to Objects" to Pcbnew main menu, and to RMB context
menus for Eeschema and Pcbnew.
Fixes https://gitlab.com/kicad/code/kicad/issues/5787
The infobar changes the size of the visible screen, so adding/removing
it will shift the screen center, causing the position of onscreen
objects to move up/down. This changes the sizing to pin the bottom
corner position when showing/hiding the infobar
Fixes https://gitlab.com/kicad/code/kicad/issues/5776
This changes the file format. All previous copper layers that had a user
defined name are forced back to the canonical name and the user defined
name is stored as an optional quoted string in the layer definition and
only used for UI and plotting purposes. All copper object layer names
are now the canonical name for internal file use.
ADDED: Nine new user definable non-copper layers that can be optionally
added to the board layer stack.
CHANGED: All board layers can now be renamed by the user.
CHANGED: User defined layer names can now contain space characters.
Fixes https://gitlab.com/kicad/code/kicad/issues/1969
The OpenGL missing segments (when small) are due to rounding in larger
coordinates. The GAL shader uses floats to represent int32 values for
position and distance. Thus, at larger coordinates, the smaller integer
values cannot be represented accurately. This tests for the rounding
error and, if it exists, draws a plain circle instead
Fixes https://gitlab.com/kicad/code/kicad/issues/5751
These settings objects could be created in a constructor/destructor
so we should catch the exception since those are noexcept.
Also change the settings trace to match the other kicad traces
as KICAD_SETTINGS
This exception will probably never be thrown in real life,
but the constructors are normally noexcept, so throwing
any exception from the json library causes Coverity to
have a fit.
Windows specific, because other OS do not accept user bitmaps in ckeckable menuitems
the bug was due to the same bitmap was set for each state for these menuitems.
Fixes#5622https://gitlab.com/kicad/code/kicad/issues/5622
Also improves the SNR and consistency of the menu item text. For
instance, a position is rarely useful, while relative sizes can be.
Also removes some unnecessary repitition, such as "Graphic Rectangle"
when "Rectangle" communicates the necessary information.
CHANGED: The margin used in 'Zoom to Fit' is now 2% instead of 10%.
ADDED: Added 'Zoom to Objects' to Eeschema which does not include
the page and border in the bbox calculations.
CHANGED: Removed pre-existing code that tweaked the center to account
for the scrollbars. It actually made the view off center. Removing it
results in perfectly centered zooms.
Fixes https://gitlab.com/kicad/code/kicad/issues/5145
The previous fix (d4461f6) removed all vars before re-add them.
Clear all vars created issues with externally defined variables (the internal
initial value was lost)
Now only old, no longer existing, vars are deleted.
Fix also a potential issue related to non ASCII7 in last stored path.
When updating common environment variables list, the initial list was never
deleted. Therefore one could not remove an existing var.
The common environment variables list is now deleted before updating.
Improves implicit rule reporting.
Makes some internal names more consistent.
Moves DRC_REPORT to the test framework.
Removes priority (which isn't supported in the grammar)
This is a board file format change to account for the new properties.
Also, we now only store the critical information about the dimension's
geometry in the board, rather than storing every drawn line.
The DIMENSION object is now an abstract base, and ALIGNED_DIMENSION
is the implementation that exists today (we will add more dimension
types in the future)
1) For a while now we've been using a calculated seg count from a given
maxError, and a correction factor to push the radius out so that all
the error is outside the arc/circle. However, the second calculation
(which pre-dates the first) is pretty much just the inverse of the first
(and yields nothing more than maxError back). This is particularly
sub-optimal given the cost of trig functions.
2) There are a lot of old optimizations to reduce segcounts in certain
situations, someting that our error-based calculation compensates for
anyway. (Smaller radii need fewer segments to meet the maxError
condition.) But perhaps more importantly we now surface maxError in the
UI and we don't really want to call it "Max deviation except when it's
not".
3) We were also clamping the segCount twice: once in the calculation
routine and once in most of it's callers. Furthermore, the caller
clamping was inconsistent (both in being done and in the clamping
value). We now clamp only in the calculation routine.
4) There's no reason to use the correction factors in the 3Dviewer;
it's just a visualization and whether the polygonization error is
inside or outside the shape isn't really material.
5) The arc-correction-disabling stuff (used for solder mask layer) was
somewhat fragile in that it depended on the caller to turn it back on
afterwards. It's now only exposed as a RAII object which automatically
cleans up when it goes out of scope.
6) There were also bugs in a couple of the polygonization routines where
we'd accumulate round-off error in adding up the segments and end up with
an overly long last segment (which of course would voilate the error
max). This was the cause of the linked bug and also some issues with vias
that we had fudged in the past with extra clearance.
Fixes https://gitlab.com/kicad/code/kicad/issues/5567
You can now enable and disable snap to grid when drawing/editing across
all apps. You can also tie snap to grid to the visibility of the grid
to allow rapid enable/disable via grid display.
Loading speed fixed by changing the way CADSTAR_ARCHIVE_PARSER::InsertAttributeAtEnd works (we now have a new attribute in each node to keep track of how many attributes there are). Now loads a 30,000 line file in 10seconds instead of 25 minutes!
Better fix than a0df876d
For new users, if this folder does not exist, saving colors does not work,
because if this folder does not exist, it is not created.
There was a regression in v6 where the zoom to selection toolbar
item wasn't canceling the tool when pressed and the tool was active
(it was in v5). This implements a more generic framework for canceling
tools on button presses.
Fixes https://gitlab.com/kicad/code/kicad/issues/5103
Also moves to WX_GRID to get rid of some wxGrid bugs, and moves the
provision of attrs to the GRID_TABLE (as those applied to the grid
are ignored when a table is specified).
Fixes https://gitlab.com/kicad/code/kicad/issues/5260
For instance, we get things like high-contrast-mode from the pad
dialog when rendering a pad preview, but we want the colours from the
parent PCB_BASE_FRAME.
The stepping is in a static event handler, so it is called
after the dynamic handler and so the dynamic handler must
allow the event to continue processing.
Fixes https://gitlab.com/kicad/code/kicad/issues/5319
windowClosing() calls Destroy() when the wxCloseEvent has no veto.
This is fine for usual EDA_BASE_FRAME frames, but not for frames shown in modal mode.
In modal mode, windowClosing() should not call Destroy(), because the calling frame
expects the instance not deleted after closing.
(the caller has to call Destroy() only once the frame can be actually deleted)
LayerName() can now be called to get the default, translatable name
for any board layer. LSET::Name() is used for the untranslated
names required for parsing board files.
We use the LIBID for board files to locate the correct library for the
footprint. Once exported, the footprint should be associated with the
library that contains it, if any.
Fixes https://gitlab.com/kicad/code/kicad/issues/5400
The center point on polygons now maintains the axis of the dragged line
and, optionally with Ctrl pressed, maintains the slope of the adjacent
segments as well.
This also fixes a longstanding issue that prevented the ctrl-snapping
from using the original point rather than the last updated point when
constraining.
Fixes https://gitlab.com/kicad/code/kicad/issues/2465
For now, much of KiCad depends on Prj() working, so when we
are asked to unload a project, immediately load the null project
so that nothing breaks.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/5374
This commit applies display origin transforms to all Pcbnew
dialog classes that use UNIT_BINDER for their formatting:
* DIALOG_CREATE_ARRAY
* DIALOG_FOOTPRINT_BOARD_EDITOR
* DIALOG_GRAPHIC_ITEM_PROPERTIES
* DIALOG_GRID_SETTINGS
* DIALOG_MOVE_EXACT
* DIALOG_PAD_PROPERTIES
* DIALOG_POSITION_RELATIVE
* DIALOG_TEXT_PROPERTIES
* DIALOG_TRACK_VIA_PROPERTIES
This commit adds the PCB_ORIGIN_TRANSFORMS class, which is derived
from the ORIGIN_TRANSFORMS class, and provides a set of templated
functions to convert PCB coordinates between internal representation
and display representation. It extends the ORIGIN_TRANSFORMS class
to understand the three user-selectable display origins and the
coordinate direction display options.
This commit modifies the UNIT_BINDER class to invoke the ORIGIN_TRANSFORMS
methods to support Display Origin Transforms.
The EDA_DRAW_FRAME class is modified to instantiate an ORIGIN_TRANSFORMS
object providing null transforms. A function is provided to allow the
UNIT_BINDER to find the ORIGIN_TRANSFORMS object in an overrideable manner.
This commit adds the ORIGIN_TRANSFORMS class to support Display Origin
Transforms in all KiCad applications.
Functions are provided to perform four basic types of origin coordinate
transforms:
* Transform a relative coordinate from internal to display form
* Transform a relative coordinate from display to internal form
* Transform an absolute coordinate from internal to display form
* Transform an absolute coordinate from display to internal form
These functions are supported for data types "int", "long long int",
and "double". The default implementations for all but "int" simply
return their input unchanged; the implementation for "int" invokes
the implementation for "long long int".
The expectation is that the different KiCad applications will create
derived classes from this base class and override the functions as
needed. Protected template functions are provided for the standard
translations to maintain consistency within the derived classes.
A subsheet may have more than one instance of a hier label,
but it's generally a mistake if there is no matching hier label
for a port on the parent sheet.
This is harder to do today now that we don't have manual tool
for placing hier ports, but it's still possible if you place
ports but then rename the label on the subsheet.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/3468
We probably don't need it, but some code attempts to dereference
it so safer to have one then to start checking everywhere for
dereferences.
Fixes https://gitlab.com/kicad/code/kicad/issues/5353
Display warning infobar in the board/schematic setup when no project
is loaded, since most of the settings in those dialogs are saved in
the project and not in the board/schematic file.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/4868
Short net names are not unique; full names with paths must be used.
Added a grid cell renderer that does the escaping, to make it easier
to display net names in grid cells.
Once you unescape a net name, you can't go back to the escaped form
because you can't assume which `/` should be {slash} and which `/`
Because of this, we cannot use Unescape/Escape on the data model in
the netclass setup panel, and instead do the Unescape in the view.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/5331
This time remove the push/pop from the picker tools as that's
responsible for the issue of trying to re-activate the move action
when its popped. Instead do the push/pop from the client code
of other actions that need it, and not at all from the move-with-
reference action.
Fixes https://gitlab.com/kicad/code/kicad/issues/5336
* Make the app progress indicator only have the indeterminate state
when the taskbar indicator is used (causes an uused variable warning
on wx<3.1)
* Remove unused dry run variable in pcb_netlist.h
* Remove unused forceDropAnnotations from the paste special dialog
since the dialog only controls keeping them.
Cairo Polyline and Polygon draw functions share a common routine. While
Polygons must have 3 points to allow triangulation, a polyline (like our
text) need only have 2
This resolves a crash when passing an empty polygon and alerts debug
users to possible generation cases when bad polygons are created.
Thanks for Frans Zellman
(https://gitlab.com/kicad/code/kicad/-/merge_requests/365) for
identifying the issue.
This freeze/thaw is different than the update locker freeze/thaw,
and is needed to prevent crashes due to accessing invalid (already
freed) data on GTK.
Fixes https://gitlab.com/kicad/code/kicad/issues/5289
The tree model adapter appears to have update issues when modifying the
scores while it _might_ get updated. This moves the lock higher and
removes the extraneous Freeze/Thaw call.
Unfortunately, this only exposes an additional issue in the tool handler
but this will hopefully be easier to debug.
Fixes https://gitlab.com/kicad/code/kicad/issues/5206
The use of printf, wxLogDebug, and std::err/std::out causes excessive
debugging output which makes finding specific debugging messages more
difficult than it needs to be.
There is still some debugging output in test code that really needs to
be moved into a unit test.
Add debugging output section to the coding policy regarding debugging
output.
Flags != language See http://www.flagsarenotlanguages.com We now use
local, untranslated language names for all languages.
Languages that have not been updated in >5 years and have less than 15%
of available strings translated have been removed from the menu options.
If a translator steps up to update the .po files, we can re-add them
This leaves the decision to check/enable menu items to the main UI
conditions, and only the menu has control over showing/hiding the menu
items. Also rip out a special case for the preferenes item that isn't
needed on OSX anymore since all the main menus have been moved to
ACTION_MENUs now.
CHANGED: Don't run the hotkey if the action's UI elements aren't enabled
This makes it so the action can't be run from either the hotkey or the
UI if its enabling conditions are not met.
* Frames moved: cvpcb, cvpcb footprints frame, gerbview, pagelayout editor
This also introduces new EDITOR_CONDITIONS that are used to set the
conditions of very common editor settings.
Also, some IDs were converted to tools in the pagelayout editor.
This allows for the tool framework to keep track of a universal
set of conditions for the UI state (enabled/checked/shown) for
controls of actions. It removes the need for the main menubar
menus to be CONDITIONAL_MENUs and be rebuilt on each open,
and instead makes the updates of the check and enabling of
items handled in the native wxWidgets way.
This commit switchs the 3d viewer and kicad project manager window
over to this system.
EDA_ITEM is a child of VIEW_ITEM, so a static_cast is not appropriate,
since in some cases it could be called with a non-EDA_ITEM argument.
This was triggering an ASAN heap-buffer-overflow in GerbView.
The variables in the common settings struct are only updated on
save, so Python must use the ones from Pgm to get its values.
This does lead to the observation that Python's changes to the
variables do affect KiCad (they can break resolvers). So apparently
it can mess with us but we can't mess with it easily.
Also, improve the environment variable tracing infrastructure to capture
more changes.
Just setting the text field is not guaranteed to fire
a text event, so we must forcefully call the regenerate
function to ensure the preselect is handled.
Fixes https://gitlab.com/kicad/code/kicad/issues/4105
The base GAL has the linewidth property already, and its
accessor will only return the base version. This was causing
problems with the Cairo printing GAL, since that setter wasn't
using the base class version. Also, this removes the print-specific
setter, since the actual setting of line width shouldn't be done
there and is instead done where the drawing happens.
Fixes https://gitlab.com/kicad/code/kicad/issues/5089
This moves the generated files out of the source tree and into
the build directory. They are now regenerated each time they are
needed, based on the timestamp of the generated file compared to
the timestamp of the lemon file.
To do this, we also bundle lemon into the thirdparty directory
and build it for ourselves since it is a very tiny program and
not all platforms seem to distribute it in a consistent manner.
Fixes https://gitlab.com/kicad/code/kicad/issues/5013
This option removes copper layers from pads and vias where they are not
connected to other board elements. This allows the inner layers to be
more closely routed if the via landing pad is not needed.
Fixes https://gitlab.com/kicad/code/kicad/issues/1835
This ensures the colors used by the status text pane in the preview
widget are the same as the canvas, so there is a seemless transition
between the two.
Additionally, remove the scrollbars from the symbol preview widget
in the place symbol dialog - they are pointless.
Before this, the environment variables inside Python wouldn't reflect
the updates to them made after the interpreter was started in Pcbnew.
This will call into Python and set the variables when they are changed,
since Python can't synchronize itself when running in an embedded
interpreter.
Fixes https://gitlab.com/kicad/code/kicad/issues/5071
ADDED: Progress indicator in the taskbar
This adds a progress indicator to the Windows and macOS taskbar
icons to display the progress of some operations.
Note, this requires wxWidgets 3.1+
KiCad stores 3D cache files but never gets rid of any of them.
This patch adds a new function called 'CleanCacheDir()'. Any cache
files older than the passed 'number of days' parameter are deleted.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/1928
Store list of previously open projects only in kicad.json
Keep all management of open projects in SETTINGS_MANAGER
Also add kicadSettings() for convenience
On platforms with limited framebuffer attachments, like GC7000L
driven by the open source etnaviv driver, we can still use
GPU acceleration by drawing directly to the main buffer.
EDA_DRAW_PANEL_GAL::onPaint checks if an overlay target is
available in the GAL, and if not, redraws the whole view if the
overlay target should be dirty.
Clearing of the overlay target is a no-op if there is no overlay
buffer.
Signed-off-by: Lukas F. Hartmann <lukas@mntre.com>
The fix convert all std::string storing a path to wxString (unicode support)
wxString were already used at many place to store paths, but not all.
For internal calculations mixing char strings and wide char strings is a recipe
for bug: any missing conversion between UTF8 and wxString breaks paths.
When drawing segments that are smaller than the segment width, OpenGL
did not use realistic values, leading to hidden, small tracks. Instead,
we set the track to only draw a segment when the length is at least 1
radius long (so that we can see the full semi-circle at the track end)
Fixes https://gitlab.com/kicad/code/kicad/issues/5009
We output a 0 opacity text in the SVG plotter to allow searching. When
this text is changed to 100 opacity, it can show up on the user screen
and so needs to be mirrored to match the stroke font output
Fixes https://gitlab.com/kicad/code/kicad/issues/5001
By default KiCad will now print each polygon point on its own line.
This adds to the vertical distance for large polygons but makes revision
control much cleaner as single point addition to a polygon does not
propagate to a diff over the full polygon.
Users/developers who want to save the files using the 4-points per line
have the ADVANCED_CONFIG setting 'CompactSave' which will provide the
original save method
This way, when the user changes their color theme, any sheets
that did not have a specific color set will change with the theme.
Also add a button to clear color overrides from a sheet, because
any schematics that have been saved before this change will have
the colors set to something other than UNSPECIFIED.
'.txt' is a common file extension for drill files. This Merge
Request adds it to the list of extensions used in the File Open dialog
for Excellon Drill files.
Fixes issue https://gitlab.com/kicad/code/kicad/-/issues/2124
We'll need this if we support the "L == foobar" syntax, and besides
it should really be up to the parser client whether or not they use
identifiers with no function call or property reference.
It also allows us to generate error messages for unknown identifers.
This API doesn't transfer ownership, so no smart pointers are required --
this just needlessly tightens requirements on the user of the interface.
(Fixes five instances of MSVC C26410 warning)
This is particularly important to keep the user from having to
enter overly verbose statements such as:
A.Type == 'via' && A.Via_Type == 'buried'
when:
A.Via_Type == 'buried'
is perfectly clear.
- Prevent crash on project tree for "Empty project" item
- Correctly handle loading of legacy projects in tree view
- Fix an issue where legacy projects would not get saved
Fixes https://gitlab.com/kicad/code/kicad/-/issues/4944
- convert expression string tokens to single-quote-delimited
- fix bug where netclass assignments weren't getting updated after
board setup dialog
- move property manager rebuild to lazy evaluation
- improve performance with wider use of const&
- retire DRC_SELECTOR stuff
- use wxString for GUI stuff (particularly translated stuff)
- fix EqualTo() to return false instead of asserting when op types
don't match
- fix buffer overruns with fixed-size string buffers
- make expression function calls case-insensitive
- integrate expression errors into rule parser
- produce more and better error messages
- keep BOARD_ITEM ptrs const as long as possible
- fix a couple of uninitialized variables
This moves the program-specific code (e.g. BIU files) into
the program tests.
Also, create title_block.cpp to break a dependency that pulled
in eda_text.cpp when using the TITLE_BLOCK object.
Str2Double assumes current locale. We usually switch the locale when
reading files but we should be using the function that explicitly gets
the C-locale conversion.
The config.h header for ngspice is not packaged with all platforms so
use pkg-config to fetch the version information when available. When
pkg-config is not available, check if the ngspice/config.h file is
installed on the system before including it to build the ngspice version
string. If neither pkg-config or ngspice/config.h is available set the
version string to "unknown".
Fixes https://gitlab.com/kicad/code/kicad/issues/4851
As expected, the required padding difference between wxStaticText and
wxHyperlinkCtrl varies depending on the platform. Restore the original
padding which was correct for windows and add the extra padding required
for GTK builds. Someone with MacOS should verify if the padding looks
correct and change the padding for MacOS as required.
List of hidden nets stored in project local settings
Hide/Show actions in context menu only for now, will
add them to some more GUI places soon.
Ref https://gitlab.com/kicad/code/kicad/-/issues/1951
The previous hash was not unique for changes in integer/boolean values.
Generic hash_combine routines provide decent coverage for limited extra
cycles.
The old way of checking for focus loss caused GTK to be unable to
even open the combobox. This way checks for the event sent when the
list closes and uses that to close the grid editor.
Fixes https://gitlab.com/kicad/code/kicad/issues/4617
LoadProjectSettings changed to take place after the board
has been loaded so that board-specific project settings can
be applied (such as net visibility and color overrides)
ADDED Eeschema-specific netclass settings including wire and bus
thickness, color, and line style.
Netclasses override individual wire & bus colors and line styles.
If that proves an issue we might look at something more sophisticated
with inheritance.
Fixes https://gitlab.com/kicad/code/kicad/issues/4581
There is a difference between how wxStaticText and wxHyperlinkCtrl
controls are rendered causing alignment issue between the two. The
cheap and dirty solution was to pad the wxStaticText but this may
yield inconsistent results depending on the platform.
Fixes https://gitlab.com/kicad/code/kicad/issues/4843
The issue for the grid color was due to the fact there are 2 places to
store the color: the color settings and the m_gridColor GERBVIEW_FRAME member.
The worksheet color (color set to RED after a color change in layer render)
is a bit strange: looks like LAYER_GERBVIEW_WORKSHEET and LAYER_WORKSHEET
are both used to draw the worksheet.
When Validate() find an out of limits user value, it displays the limits.
However, the displayed limit value was incorrectly converter to internal units,
and strange values were displayed.
GTK only calculates new widths once the tree is displayed,
so calling Refresh after updating the tree but before display
will return a column width of 0. Instead, use saved column
widths if an invalid width was returned.
Fixes https://gitlab.com/kicad/code/kicad/issues/4837
Adds a possibility to replace properties inherited from base types with
a more specific ones. For example, such properties may have:
- different meaning which should be reflected in property name
(e.g. TRACK::{G,S}etWidth() sets actual track width, but
VIA::{G,S}etWidth() modifies the diameter)
- different set of possible values (e.g. BOARD_CONNECTED_ITEM::SetLayer()
should accept any copper layer, but MODULE::SetLayer() works only with
F.Cu and B.Cu)
Introduces classes:
- INSPECTED: base class for types taking advantage of
generic properties system.
- PROPERTY*: meta-data storing information about properties
- PROPERTY_MANAGER: singleton class to get properties data
- New public static function OPENGL_GAL::CheckFeatures() gets called in EDA_DRAW_PANEL_GAL::SwitchBackend() before switching to OPENGL_GAL
- Moved all OpenGL feature checks from OPENGL_GAL constructor to OPENGL_GAL::init()
Fixes https://gitlab.com/kicad/code/kicad/-/issues/4714
As long as the arc angle stays below <60°, it will automatically choose between
clockwise and counter clockwise. This allows the user to choose the direction
with a simple mouse movement.
Swap syncs can limit the redraw rate as the screen waits for previously
issued syncs. Setting this to -1 allows for adaptive swapping
(resorting to unsynced if it falls behind) if it is supported by the
card but will fall back to unsynced (0) if the adaptive is not
supported.
Fixes https://gitlab.com/kicad/code/kicad/issues/4226
- Fix file extension for new project
- Fixes for exceptions on MSW
- Fix some ASAN issues
- Allow SETTINGS_MANAGER to run headless
- Don't flag schematic as modified after schematic setup is closed
- Don't automatically unload projects when LoadProject is called
- Don't unload project if it's the same as the current one
- Make sure to properly init/de-init template field names
Per discussion on the developers list, this old system
no longer provides much value and is seen as annoying
by many users. The new save logic should prevent any
cases of file corruption on save, which was a major
reason for the backup file system existing.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/2012
Various architecture upgrades to support this.
Creating a BOARD now requires a valid PROJECT, which caused
some (mostly transparent) changes to the Python API internals.
ADDED: Project local settings file
CHANGED: Board design settings are no longer stored in PCB file
CHANGED: Net classes are no longer stored in PCB file
CHANGED: Importing board settings now reads boards, not just projects
Fixes https://gitlab.com/kicad/code/kicad/-/issues/2578
Fixes https://gitlab.com/kicad/code/kicad/-/issues/4070
Remove extraneous use of FLAG0 from tracks cleaner (it was checked but
never set).
Fix issue in expand connections where two parts of it couldn't agree
on the same flag (BUSY vs SKIP_STRUCT), and where the second part was
clearing the flag instead of setting it.
Remove obsolete HIGHLIGHT infrastructure (we now use selection).
Remove extraneous use of BUSY flag in several places (it was never
set).
Removes the TTL triangulator in favor of the delaunator triangulator.
This removes the only AGPL code in the KiCad codebase and therefore
allows the full project to be licensed under the GPLv3.
Add missing plot and print changes for the new bus entry properties.
ADDED: Junction properties diameter and color can now be edited.
Fixes: https://gitlab.com/kicad/code/kicad/issues/4593
when a wxTextCtrl has the focus but is read only, and cannot use a CHAR event.
It fixes an issue in Kicad manager (menus with accelerator not working) when
the wxTextCtrl window showing messages has the focus.
It's currently only supported in the Footprint Editor. It could be
easily added to the board editor (all the code is there), but the board
editor is a little short on room in the drawing tools toolbar.
As of ab83c862, the canvas scaling setting is now used on OSX
(before it was ignored). Legacy settings would have this set to 1.0,
which would not automatically scale the canvas and break on Retina
displays. OSX auto detection works well enough in wx 3.0, so we
can use it now.
Due to rounding issues, sometimes (especially for rotated pads) the region
(4 segments+4 arcs) was incorrectly closed (1 unit (nanometer) mismatch between
start point and end point.
Although it does not create bad shape, its breaks the round rect pad identification
in CAM tools.
start point and end point are now the same.
The scaling factor stored inside the canvas is created by a DPI_SCALING
helper, which will call the platform-specific functions if no user scaling
is specified. This change only affects OSX and Retina displays, so this
now also allows custom scaling to be used on OSX if desired (although it
shouldn't be needed, since wx has detection for it in 3.0.4).
A note to developers, please do not set the minimum and/or size of bitmap
buttons. It causes bitmaps to get clipped using GTK on Linux. If the
bitmap button size is not acceptable, then supply an appropriately sized
bitmap rather than attempt to force the wxWidgets sizing mechanism to do
what you want. This almost always causes platform differences that do
not work well.
* Implement ReparentQuasiModal for OSX natively
* Implement ForceFocus of OSX natively
This change means we no longer rely on the kicad-specific functions in our osx wx fork.
When the ERC is run and a component has a ERC error linked to it, if it is deleted,
when reopening the ERC dialog, the dialog crashed due to a not found item
(null pointer use)
You can now choose the behavior of dragging with the
middle and right mouse buttons.
You can also choose which modifier keys to use for
panning and zooming with the scroll wheel or trackpad.
You can also customize the zoom speed, which makes
it possible to have a good zoom experience on a wider
range of input devices.
You can also now zoom by dragging with the right or
middle button if desired.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/3885
Fixes https://gitlab.com/kicad/code/kicad/-/issues/4348
Note: this is a basic implementation but it could be
improved once we include bus information in the netlist
and pcbnew can natively keep track of buses and nets
instead of just nets.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/4158
The escape key event shouldn't be propagated after the first
tool dispatcher. Propagatint it causes it to go to parent frames,
which can mean problems arise (such as in cvpcb, where an
escape key press in the fpviewer frame was closing the main
cvpcb window when it is propagated).
CHANGED: Cvpcb fpviewer and the pcbnew fpviewer no longer have an options dialog
ADDED: Add a side toolbar to the pcbnew footprint viewer (and the measure tool)
This also cleans up some of the settings structs in the viewers, since
it was somewhat confusing before.
Fixes https://gitlab.com/kicad/code/kicad/issues/2205
* Consolidate the measure tool into one tool (this gives cvpcb
unit changing and snapping capabilities in its measure tool)
* Transition cvpcb to use actions for the sketch modes
* Replumb how magnetic items settings are stored and used
* Move it to a panel along with the canvas to have a better UI
* Allow the infobar to automatically close after a set time
CHANGED: The eeschema find notifications now use the infobar instead of
a popup window
This widget allows for non-intrusive display of text
above the editing canvas. Currently, this is used
for displaying the read only status of the files.
Set up a new lineage for SCH_ITEMS to get back to the SCHEMATIC
they live on: Items will all be parented to the SCH_SCREEN that
they are added to, and each SCH_SCREEN will point back to the
SCHEMATIC that it is part of. Note that this hierarchy is not
the same as the actual schematic hierarchy, which continues to
be managed through SCH_SHEETs and SCH_SHEET_PATHS.
This is required, because Ninja otherwise doesn't properly rebuild after
updating the version string header file.
Because BYPRODUCTS requires CMake 3.2, bump the minimum version and remove
now unused compatibility code for older CMake versions.
The window decorations introduce an offset to our window size, since
they are not used when restoring the window size at startup they are
added by the window manager again.
Fixes https://gitlab.com/kicad/code/kicad/issues/4278
Migrate COLOR_SETTINGS 0->1 to remove fpedit section
Migrate FOOTPRINT_EDITOR_SETTINGS 0->1 to use new theme if created
Remove COLOR_CONTEXT that is no longer needed
Wayne Stambaugh
Seth Hillbrand
Jeff Young
Marek Roszko
Ian McInerney
jean-pierre charras
Michael Kavanagh
Roberto Fernandez Bautista
RigoLigoRLC
qu1ck
Dominik Wernberger
Simon Richter
Oleg Endo
Jon Evans
Thomas Pointhuber
PJM
Tomasz Wlostowski
Mikolaj Wielgus
Mario Luzeiro
Fabien Corona
Reece R. Pollack
Qbort
Joshua Redstone
bjpiccioni
Peter Montgomery
mntmn
Ben Ellis
Urja Rannikko
Maciej Suminski
Johannes Pfister
Stefan
emC5RgViIK