haskal
/
kicad
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
38,119 Commits 9 Branches 105 Tags 1.3 GiB
Commit Graph

1465 Commits

Author SHA1 Message Date
Jon Evans 6cb8154ec0 PNS: Remove code that broke width changes during placement 
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8334
 2021-06-06 19:21:52 -04:00
Jon Evans 6789dac20b PNS: Keep most recent good placement around for a rainy day 
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8562
 2021-06-06 18:56:33 -04:00
Jon Evans c9bc45f7ed PNS: Limit the maximum walkaround distance factor 
The constant chosen is somewhat arbitrary and may need
further tuning or a more complex algorithm, but in general
this will prevent churning when solutions can't be found or
a solution can be found but it is unrealistic (going around
the entire board)

Fixes https://gitlab.com/kicad/code/kicad/-/issues/8558
 2021-06-06 16:03:03 -04:00
Jon Evans d32b9c1c25 Use debug group for line placer debug 2021-06-06 15:44:53 -04:00
Jon Evans f5185f6927 Revert part of the anti-churn change, it causes bad side-effects 
Further performance tuning could be useful but the part that
remains helps the most when hugging in large designs
 2021-06-06 15:44:53 -04:00
Marek Roszko 8377ebb0e1 Fix msvc warnings 2021-06-06 15:30:31 -04:00
Marek Roszko 10e60acf34 Clean up including of board_design_settings.h 2021-06-06 15:03:42 -04:00
Jon Evans 5349f47f95 PNS: Prevent walkaround churn in unsolvable situations 
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8558
 2021-06-06 14:57:52 -04:00
Jon Evans 3475d0cebd PNS: Grab start item based on clearance if no direct hits found 
Fixes annoying "routing start point violates DRC" messages when
entering the router from the hotkey and not directly over a track.
 2021-06-06 14:57:52 -04:00
Jon Evans 17da050e69 Improve walkaround results when last point is inside the hull 
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8563
 2021-06-06 12:55:32 -04:00
Jon Evans be61bf29dd Use more accurate hull shapes for round solids 
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8561
 2021-06-06 09:53:51 -04:00
Marek Roszko b610b905fc Cleanup track.h includes 2021-06-06 09:06:55 -04:00
Jon Evans 3b7480c1c1 PNS: Invalidate start/end items after finishing a route 
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8555
 2021-06-06 08:52:39 -04:00
Tomasz Wlostowski ab04e24f9a router: rhMarkObstacles should return a correct error status 
Long story short: a few days ago I fixed error handling in routeStep(), so it actually started to recognize the wrong error status returned
by rhMarkObstacles() and think that the trace is always incorrect.

fixes: https://gitlab.com/kicad/code/kicad/-/issues/8557
 2021-06-04 23:58:56 +02:00
Jeff Young 00791e1e37 Fix compile issues on clangd. 2021-06-03 23:41:06 +01:00
Marek Roszko 1c1ba25ffd Use char_str instead of c_str in previous commit 2021-06-03 18:13:35 -04:00
Marek Roszko daf510344f Fix build error due to pns changes 2021-06-03 18:05:48 -04:00
Tomasz Wlostowski 63fc7a1908 router: support for drag/walkaround/shove for joints between lines of different widths. 
fixes: https://gitlab.com/kicad/code/kicad/-/issues/1773
 2021-06-03 22:44:53 +02:00
Tomasz Wlostowski af26eab5fb router: even more debug in SHOVE 2021-06-03 22:44:53 +02:00
Tomasz Wlostowski a744857267 router: fix array out-of-bound error in HullIntersection() 
fixes: https://gitlab.com/kicad/code/kicad/-/issues/8538
 2021-06-03 22:44:53 +02:00
Tomasz Wlostowski 3e98c44636 router: LOGGER now stores UUIDs, not pointers to BOARD_ITEMs. 
Caused occasional crashes when saving the debug event log, as some of the BOARD_ITEMS could have been deleted before SaveLog call.
 2021-06-03 22:44:53 +02:00
Tomasz Wlostowski e5e588ebba router: temporarily export LINE::Walkaround() debug global variables 2021-06-03 22:44:53 +02:00
Tomasz Wlostowski 70ed5c1ae8 router: introduce concept of 'virtual' vias as a base for shoving/dragging joints of lines of different widths. 2021-06-03 22:44:53 +02:00
Ian McInerney 4f05262705 Cleanup includes in board.h and footprint.h 2021-06-03 20:19:52 +01:00
Marek Roszko 4df3cb912d Remove another leaky wx/log.h header 2021-06-03 08:11:15 -04:00
Marek Roszko cf2bb5692a Remove the wxLog calls from math/util.h for now 
This was leaking windows headers and partial wx headers to 1084 compilation units......
This also means math/util.h is leaking to 1084 compilation units which seems a bit high too.
 2021-06-01 18:44:22 -04:00
Jon Evans 247da631f9 Revert "Fix typo and clean up leftover tracks" 
This reverts commit ed66c0f14d.

Revert "Clean up co-linear tracks after finishing routing"

This reverts commit 1a102f03c0.

More complex solution needed

Fixes https://gitlab.com/kicad/code/kicad/-/issues/8526
 2021-06-01 11:18:00 -04:00
Jon Evans 1a102f03c0 Clean up co-linear tracks after finishing routing 
This involved adding some extra infrastructure to be able
to handle the case where a track that is sitting in the
router's commit waiting to be added to the board actually
needs to be deleted instead.

Fixes https://gitlab.com/kicad/code/kicad/-/issues/8419
 2021-05-31 17:36:38 -04:00
Marek Roszko 382dca4e6f Fix uninitialized member warnings 
Based on PVS Studio report
 2021-05-30 20:01:01 -04:00
Tomasz Wlostowski 67f0bbc6d7 router: fixed crash in HullIntersection() when the path has 0 or 1 points. 
fixes: 8515
 2021-05-31 00:20:32 +02:00
Tomasz Wlostowski 614787caae router: clear head line geometry if current head routing failed + small improvement to follow-mouse optimization. 
Also added a lot of verbosity for the pns-log-viewer tool.

Fixes: 8511
 2021-05-31 00:18:42 +02:00
Tomasz Wlostowski dfd80e077c router: fix another corner case in LINE::Walkaround() (duplicated vertex triggered by feeding a closed loop as the input path) 
fixes: 1775
 2021-05-31 00:17:12 +02:00
Jon Evans 0da85ded2f PNS: Fix diff pair handling of microvias as start items 
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8514
 2021-05-30 15:51:28 -04:00
Tomasz Wlostowski fcb89b99a3 router: walkaround algo should not copy the previous via position when the current iteration via placement fails. 
fixes: 7827
 2021-05-30 00:35:58 +02:00
Tomasz Wlostowski af2e163890 router: annotate source locations of WALKAROUND debug items 2021-05-30 00:35:54 +02:00
Jon Evans 3eb5a484e1 PNS: Don't clip tuning paths to pads on other layers 
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8504
 2021-05-29 15:52:44 -04:00
Jon Evans 28f17c3ae6 PNS: Prevent wrong clearance being cached for new diff pairs 
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8377
 2021-05-29 13:31:17 -04:00
Jon Evans 85ca85652d Do not add debug items to view if debug flag isn't enabled 
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8510
 2021-05-29 12:40:24 -04:00
Jon Evans bd59da3642 PNS: Local min distance has a minimum points requirement 
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8510
 2021-05-29 12:40:24 -04:00
Tomasz Wlostowski ebd957b08e router: rework router's debugging infrastructure to be more compatibile with the 'qa/pns/pns-log-viewer' tool. 
The log viewer tool lets you inspect all the intermediate stages of the routing algorithms. This patch:
- Adds source location tracking of the debug calls (need to use the PNS_DBG macro, sorry)
- Moves some wxLogTrace calls to DEBUG_DECORATOR::Message() so that messages can be displayed alongside the corresponding geometric shapes
 2021-05-29 00:13:24 +02:00
Tomasz Wlostowski 132eb53a40 router: clean some debug clutter 2021-05-29 00:13:24 +02:00
Tomasz Wlostowski b3caa3c4d4 router: fix ordering of colliding hulls in NODE::NearestObstacle() 
Replaced the generic SHAPE_LINE_CHAIN::Intersect() with PNS::HullIntersection() which correctly rejects
'non-penetrating' intersections.
 2021-05-29 00:13:24 +02:00
Tomasz Wlostowski e66bbfd1ec router: improve the feel of the walkaround algorithm 
Makes walkaround more 'huggy' - the trace being routed sticks to obstacles
instead of jumping around in uncontrollable way.
 2021-05-29 00:13:24 +02:00
Tomasz Wlostowski 8148b5d81f router: improvements in LINE::Walkaround() 
- Fix walk failure if the input path starts on the hull boundary
  (happens very often during tight walkaround)
- Input line can have a loop at the end now. Such condition happens when the routing
  destination point lies inside the hull of a colliding primitive.
 2021-05-29 00:13:24 +02:00
Tomasz Wlostowski d2ec3fc4ed router: P&S-specific hull/line interection function that correctly rejects segments/vertices that only touch the hull polygons without penetrating them 2021-05-29 00:13:24 +02:00
Tomasz Wlostowski 8c4361bbc6 router: adapt to new SHAPE_LINE_CHAIN::INTERSECTIONS structure 2021-05-29 00:13:24 +02:00
Jeff Young 5c9a73aa5e Correct position for grid even when we're not snapping to a point. 
Fixes https://gitlab.com/kicad/code/kicad/issues/8125
 2021-05-25 21:57:19 +01:00
Jeff Young 4c69a74505 Force layers visible when routing on them. 
Fixes https://gitlab.com/kicad/code/kicad/issues/8432
 2021-05-16 11:18:31 +01:00
david-beinder 75f49ba1b6 Add length tuner settings to toolbar context menu 2021-05-12 02:34:52 +00:00
Jon Evans bc6b9b527a Allow stackup height to be excluded from length calculations 
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8384
 2021-05-10 22:11:58 -04:00
Jeff Young 7356f9568d Move grid disable modifier from ALT to CTRL. 
Also had to move the H/V/45 disable modifier from CTRL to SHIFT.

Fixes https://gitlab.com/kicad/code/kicad/issues/8124
 2021-05-09 20:17:40 +01:00
Jon Evans 1a45d9474b Don't show commands that cancel routing when routing is in progress 
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8363
 2021-05-08 14:55:02 -04:00
Marek Roszko 03cf2b517f Enum class PAD_ATTR_T 
Renamed such that python stays the same
 2021-05-01 10:51:54 -04:00
Marek Roszko e20562b09b Some cleanup 2021-05-01 10:37:20 -04:00
Marek Roszko 21fde9b629 enum class PCB_SHAPE_TYPE_T 2021-04-30 22:36:12 -04:00
Tomasz Wlostowski a433451bd8 router: 'root line' tracking in the SHOVE algorithm. See comments for detailed explanation. 2021-04-27 14:13:16 +02:00
Tomasz Wlostowski 3a8744d054 router: introduce concept of a root lines in the OPTIMIZER. 
By 'root lines' we mean the oldest traceable ancestor of each track moved by the router
(i.e. after shoving for a while, the root of each shoved line is it's latest non-shoved version).

With this we can teach the OPTIMIZER more tricks, such as the LIMIT_CORNER_COUNT constraint. It ensures
the results of the optimization will not be less cornery than the original line, reducing the feeling
of the optimizer being too intrusive.
 2021-04-27 14:13:16 +02:00
Tomasz Wlostowski 76f8861e6e router: revert Seth's arc adjustment in StartDragging(). 
Fixes picking the last segment instead of the last vertex to drag (when one is requested).
I didn't notice any behaviour change of the dragger wrs to arcs.
 2021-04-27 14:13:16 +02:00
jean-pierre charras e27733587d Fix 2 minor Coverity warnings. 2021-04-23 19:57:36 +02:00
Jonathan Haas 075bd788eb Remove unused OBSTACLE_VISITOR::m_extraClearance 2021-04-23 01:53:09 +00:00
Ian McInerney ecd9bf696e Be consistent about using nullptr instead of 0 
0 can be too easily overloaded into an int, so ensure we use nullptr
when we mean pointers.
 2021-04-22 22:20:34 +01:00
Jon Evans cf47d665ea PNS: Dragged line needs to retain width 
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8246
 2021-04-22 09:04:41 -04:00
Jon Evans 9b1890606d PNS: Do not allow resolved optimal values to go below board minimums 2021-04-21 22:43:26 -04:00
Jon Evans cbd7d698a9 Fix diff pair error message suffix suggestions 
We accept diff pairs that end in N/P, no underscore required
 2021-04-20 21:08:34 -04:00
Jon Evans 2535daf661 PNS: Account for via stack height in diff pair length tuner 
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8256
 2021-04-20 19:31:10 -04:00
Jon Evans dd828bd964 PNS: Bring back original Highlight Collisions behavior 
From discussion with Tom, Jeff, and Wayne, it appears as though
we all agreed that Highlight Collisions should behave like it
did in 5.1, which is to say, always just highlight collisions,
never prevent them.  The Allow DRC Violations checkbox just
controls whether or not you can fix/commit the head line if it
has violations; you are not prevented from moving the head
line to violating positions in any case.

Right now, there does not seem to be much demand for a separate
"Stop at First Obstacle" mode since Walkaround basically does that
but better, but we agreed that if there is demand for it in the
future, it should be implemented as a new router mode rather than
a behavior of Highlight Collisions mode controlled by the Allow
DRC Violations checkbox.

Fixes https://gitlab.com/kicad/code/kicad/-/issues/7828
 2021-04-18 21:01:07 -04:00
Tomasz Wlostowski 4538d78828 router: fix via shoving regression. 2021-04-19 00:43:30 +02:00
Tomasz Wlostowski 57de83897a router: VIA SetDrill() and SetPosition() must update the hole shape too. 2021-04-19 00:43:15 +02:00
Jon Evans ec6995697d PNS: even more free performance 
If this doesn't work, we have bigger problems
 2021-04-18 09:50:06 -04:00
Jon Evans 6425ad4118 PNS: Fix propagateDpHeadForces obstacle calculation 
Using a synthetic via here doesn't quite let us use VIA::PushoutForce
because it will use the wrong clearance, and also doesn't quite have
the logic we want.  I am not familiar enough with PushoutForce to know
if its logic is a bug in other cases, so instead I just brought in the
parts of its algorithm that are needed here.

Additionally, we prevent pushing more than once from a given obstacle,
which causes walkaround to be more successful when routing diff pairs
against a large collider such as a keepout area.

Fixes https://gitlab.com/kicad/code/kicad/-/issues/8232
 2021-04-17 22:37:30 -04:00
Jon Evans 5974446523 PNS: Let's make the r-tree work for us 
I'm not sure where the magic number of "4x worst" came from, but it's
been around forever.  This is extremely inefficient as it negates much
of the power of r-tree filtering in dense designs.  If we really trusted
it, we could set this just to worstClearance.  Keeping it above the worst
clearance by a little bit seems to provide enough of a speed improvement
to resolve the test cases I have, so I'll go with that for now.

Fixes https://gitlab.com/kicad/code/kicad/-/issues/7777
 2021-04-17 21:37:11 -04:00
Jon Evans 1d7e5a0443 Fix merge error that prevented a previous change from working 2021-04-14 23:30:16 -04:00
Jon Evans 268d570941 PNS: keep last valid diff pair trace as current state 
This allows fixing/committing what is on screen even if the current
cursor position doesn't have a valid solution (the old behavior
would result in the current trace disappearing)
 2021-04-14 23:21:10 -04:00
Jon Evans c829dba88e PNS: Reduce minimum distance to start turn in diff pair placer 
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8193
 2021-04-14 23:21:10 -04:00
Jon Evans cac4d70154 PNS: Respect fix-all in diff pair placer 2021-04-14 23:21:10 -04:00
Jon Evans 296a9df530 PNS: Pick up diff pair starting width from continuation track 2021-04-12 23:10:15 -04:00
Jon Evans 1d9ca181a2 PNS: Use existing seg direction if both DP segs are parallel 2021-04-12 22:34:13 -04:00
Jon Evans 311cde0984 Safety check suggested by Coverity 2021-04-12 20:42:50 -04:00
Jon Evans 2aa5e568e8 Refactoring 2021-04-12 20:40:05 -04:00
Jon Evans 73fb85a352 PNS: Calculate diff pair primitive orientation using anchors only 
The previous method fails if the primitive is an expanding or
contracting pair (diagonals going inward or outward) resulting in
incorrect orientation, which then leads to incorrect candidate
gateways being generated and no solution found.

Fixes https://gitlab.com/kicad/code/kicad/-/issues/8185
 2021-04-12 20:34:44 -04:00
Jon Evans 715c61ac9f PNS: Fix yet more arc edge cases 
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8150
 2021-04-12 19:59:55 -04:00
Jon Evans 49a91414d7 PNS: Apply co-linear seg merging to drag operations 2021-04-11 22:32:11 -04:00
Jon Evans 1c431d9929 PNS: Fix some off-by-one errors with arc dragging 2021-04-11 22:12:53 -04:00
Jon Evans a26fc6d65d PNS: Fix several issues with arc dragging 
Do not merge vertices that belong to different arcs
Fix start segment identification after arcs
Fix free-angle drag after arc

Fixes https://gitlab.com/kicad/code/kicad/-/issues/8173
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8150
 2021-04-11 17:56:40 -04:00
Jon Evans 7ba110bd77 PNS: Fix dragging of segments with arcs in line 2021-04-11 10:18:57 -04:00
Thomas Pointhuber a30894e5a1 Allow SHAPE_LINE_CHAIN and SHAPE_ARC to be mirrored using a SEG 2021-04-11 13:27:25 +00:00
Thomas Pointhuber fe8fbf1d5d Use arcs instead of line approximation for Miter shape 
TODO:

* The resulting line chain is broken with the arcs, and
this appears to be some subsequent issue I was not able to pin down.
* The requirement of a correction factor is not clear to me
 2021-04-11 13:27:25 +00:00
Jon Evans 5c448057c8 PNS: Prevent state flicker when starting drag 2021-04-10 16:31:39 -04:00
Jon Evans 7784d7cb12 PNS: Fix visible area restriction 
VIEW::GetBoundary() returns the entire view area, not the visible area.
Surprisingly, we had no API for this, so I added one.

Also, changed the dragger behavior to toggle between optimizing just the
modified area and optimizing the visible area, i.e. we will now never
optimize off-screen portions of the dragged track.
 2021-04-10 16:13:08 -04:00
Jon Evans 94afdcb92a PNS: Allow control of area-restricted drag optimization 
CHANGED: The interactive router settings now include a switch to
         enable or disable optimization of the entire dragged track,
         which is now disabled by default.  When enabled, the router
         will reroute the entire track (from the dragged segment to
         the closest pad/via in each direction) to be more optimal.
         When disabled, only the area around the dragged segment
         will be modified.

CHANGED: The "optimizer effort" slider is removed from the interactive
         router settings dialog, as this setting did not have any
         meaningful impact in most cases and was a source of confusion.

Fixes https://gitlab.com/kicad/code/kicad/-/issues/5918
 2021-04-10 15:17:39 -04:00
Jeff Young dc0cf3b802 Clean up a confusing API. 
AllowDRCViolations is kept in any mode as a *setting*, but only
controls router behaviour when the mode is mark obstacles.

Fixes https://gitlab.com/kicad/code/kicad/issues/7795
 2021-04-10 11:08:02 +01:00
Jon Evans d878cbddbc PNS: a few forgotten cleanup items 2021-04-07 23:34:45 -04:00
Jon Evans c9040a5c53 PNS: fix some weirdness identified by PVS 2021-04-07 23:16:56 -04:00
Jon Evans d4957b112e PNS: Keep last valid drag solution in the node 
Fixes https://gitlab.com/kicad/code/kicad/-/issues/5450
 2021-04-07 21:59:23 -04:00
Jon Evans 26835f582c Some situations require more than one dummy 
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7820
 2021-04-07 21:30:18 -04:00
Jon Evans 9432484394 PNS: Find origin segment correctly when arcs are present 
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8139
 2021-04-07 20:28:30 -04:00
Jon Evans 9f957d3e08 Fix crash when attempting to tune discontinuous lines 
Also correctly find the tuning path through arcs

https://gitlab.com/kicad/code/kicad/-/issues/8131
 2021-04-06 09:07:11 -04:00
david-beinder b2f788adc1 PNS: Fix UseConnectedTrackWidth when starting from ARCs 2021-04-06 01:27:13 +00:00
Jon Evans e46c9d35ac Add undo/redo handling to length tuner event loop 
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8129
 2021-04-05 19:58:14 -04:00
Jon Evans 24cd174a23 Don't dereference a possibly-invalid optional 2021-04-05 19:34:57 -04:00
Jon Evans a6c3d74a73 Pass active layer to StartRouting in length tuner 
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7857
 2021-04-04 21:51:54 -04:00
Jon Evans a24bc34b66 Better colors for length tuning popup in dark mode 2021-04-04 20:33:59 -04:00
Jon Evans c7ecb51f77 Update PNS length tuning algorithm to match the new BOARD algorithm 
Now tracks inside pads are optimized to give a more accurate length.
Also, the start/end of the assembled line is used to identify the right
pad joints for pad-to-die length calculation.

Fixes https://gitlab.com/kicad/code/kicad/-/issues/4204
Fixes https://gitlab.com/kicad/code/kicad/-/issues/1765
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6877
 2021-04-04 20:27:22 -04:00
Jon Evans cdfb014ab6 CHANGED: Account for via height in track length calculations 2021-04-04 13:59:18 -04:00
Jon Evans 6b24abac8f PNS: Don't snap to end items if snapping is disabled by modifier key 
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8033
 2021-04-04 10:22:23 -04:00
Jon Evans a8896ebd73 Don't show leading ratline for unconnected net 
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8040
 2021-04-02 20:29:25 -04:00
Jeff Young f88d39b4f0 Fix state issue in router's switch layer handling. 
Fixes https://gitlab.com/kicad/code/kicad/issues/7590
 2021-04-01 18:10:04 +01:00
Jeff Young 8cb6f15687 Warn when diff pair router can't start due to too-small-gap. 
Fixes https://gitlab.com/kicad/code/kicad/issues/7795
 2021-03-30 19:49:23 +01:00
Jon Evans 78a60e9dfb PNS: Put polygon error outside pad shapes 
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7672
 2021-03-29 19:49:59 -04:00
Jon Evans 6cbc3fb97d Fix a minor inconsistency between router and DRC 
Also make sure collision highlighting runs at the starting
location of a drag.

See: https://gitlab.com/kicad/code/kicad/-/issues/7672
 2021-03-29 19:41:17 -04:00
Jon Evans 8be9832153 PNS: Don't highlight Net 0 (the unconnected net) 
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8040
 2021-03-29 17:45:07 -04:00
Jon Evans 132ec37b56 Handle arc in buildHullForPrimitiveShape 
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8008
 2021-03-25 21:25:30 -04:00
Jeff Young 8be213e36f Trim includes (and use consistent terminology in error messages). 2021-03-21 20:15:47 +00:00
Jon Evans 5e0b65c3a8 Change wording of corner rounding action 
Fixes https://gitlab.com/kicad/code/kicad/-/issues/4505
 2021-03-21 15:55:56 -04:00
Jeff Young cad1cb0262 Improve naming. 2021-03-16 12:07:06 +00:00
Jon Evans 18037e2f65 Rework bitmap system to load from archived PNGs 
Bitmaps are now identified by an enum class instead of by pointers.
Bitmap loading and caching is now handled by a class in common, and
we no longer compile most bitmaps into the binary, so there is no
longer a bitmaps static library.

Instead, bitmaps are archived to a .tar.gz file which is installed
in ${KICAD_DATA}/resources/images.tar.gz

The source PNGs are checked in to Git as the original CPP files were,
so that people can build without the required dependencies to convert
SVGs to PNGs.

Initial support is also added for dark theme icons, although this
is not yet exposed in the GUI.

Stubs are present for multi-resolution image resources, but this is
not fully-baked yet and could use some refinement.
 2021-03-11 08:37:35 -05:00
Jon Evans 720147d272 Remove transitive inclusion of bitmaps.h 2021-03-07 16:08:57 -05:00
david-beinder df99ee39d9 PNS: new through vias should span all copper layers 
Fixes https://gitlab.com/kicad/code/kicad/issues/7576
 2021-03-07 17:58:43 +00:00
Wayne Stambaugh 79a9d69ff5 Coverity fixes for issues 314755, 316287, 324536, 324539, and 324539. 2021-03-02 08:10:37 -05:00
Jeff Young d06e8ef01c Honour pre-defined-size selections for diff pairs. 
Fixes https://gitlab.com/kicad/code/kicad/issues/7759
 2021-03-02 12:12:05 +00:00
Jon Evans d269778cd4 PNS: disable smart pads in walkaround if posture is forced 
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7710
 2021-02-27 13:48:01 -05:00
Jeff Young b36e1c741d Fix insidious bug which resets layer of SOLID when marking collision. 
It's supposed to be setting the layer of the collsion display object,
not the host object, but there's a typo.

Fixes https://gitlab.com/kicad/code/kicad/issues/7712
 2021-02-25 23:39:48 +00:00
Jeff Young 75032f3acd Use the more-constrained layer when running rules. 
Fixes https://gitlab.com/kicad/code/kicad/issues/7639
 2021-02-25 22:58:07 +00:00
Tomasz Wlostowski 87ea540953 Fix whitespace errors 2021-02-25 17:18:23 +01:00
Tomasz Wlostowski c79610e132 router: post-rebase fixes 2021-02-25 17:18:23 +01:00
Marek Roszko 6948cdd8ef router: Fix return type within pointInside2 2021-02-25 17:18:23 +01:00
Tomasz Wlostowski 9bdfc13155 router: improve locality of post-shove optimization 
Fixes: #4359
 2021-02-25 17:18:23 +01:00
Tomasz Wlostowski e1d4bb777c router: use new LINE::Walkaround in the walkaround algo 2021-02-25 17:18:23 +01:00
Tomasz Wlostowski 045d02f818 router: add strict/loose area restriction constraint. WIP 2021-02-25 17:18:23 +01:00
Tomasz Wlostowski 24574aa2f5 router: first insert intersections, then build graph in Walkaround() 2021-02-25 17:18:23 +01:00
Tomasz Wlostowski 61e75a838b router: replace large stack variables with std::array 2021-02-25 17:18:23 +01:00
Tomasz Wlostowski 028f209126 router: more robust LINE::Walkaround() implementation 2021-02-25 17:18:23 +01:00
Tomasz Wlostowski e9c55cd0e3 router: if the drag anchor is not reachable by the mouse, use the closest point on dragged trace for optimizer restriction 
Fixes: #4056
 2021-02-25 17:18:23 +01:00
Tomasz Wlostowski a141ed3444 router: feed view size change events to the router engine 2021-02-25 17:18:23 +01:00
Tomasz Wlostowski 12dfb541fc router: expose current view area to the router algorithms so that the optimizer could know not to mess with traces/vias not currently visible to the user (wip) 2021-02-25 17:18:23 +01:00
Tomasz Wlostowski 2831c7d24c router: fix compile error in DRAGGER 2021-02-25 17:18:23 +01:00
Tomasz Wlostowski b67e5768a6 router: feature to save debug event log & board dump for easier recreation of router bugs and misbehaviours 2021-02-25 17:18:23 +01:00
Tomasz Wlostowski ebdc68ac1d router: correctly handle line width in PREVIEW_ITEMs 2021-02-25 17:18:23 +01:00
Tomasz Wlostowski 34c037684b router: partially migrate SHOVE algorithm to use new DEBUG_DECORATOR 2021-02-25 17:18:23 +01:00
Tomasz Wlostowski 0e6cf3f56e router: fix board edge clearance queries 
Fixes: #7254
 2021-02-25 17:18:23 +01:00
Tomasz Wlostowski 4574f52eac router: DRAGGER::CurrentNode() should always return non-null value 2021-02-25 17:18:23 +01:00
Tomasz Wlostowski e221b11e3b GRID_HELPER: fixed arithmetic issue in segment snap distance check disguised as 'excessive optimization' by the dragger in the router 2021-02-25 17:18:23 +01:00
Tomasz Wlostowski 325300bd76 router: don't use compound pad shapes if pad contains a single primitive shape 2021-02-25 17:18:23 +01:00
Tomasz Wlostowski a4bd2ad8c6 router: drag in walkaround mode now works 2021-02-25 17:18:23 +01:00
Tomasz Wlostowski f84836f51e router: factor out POSTURE_SOLVER to more generic MOUSE_TRAIL_TRACER class 2021-02-25 17:18:23 +01:00
Tomasz Wlostowski af95235f47 router: report debug log events from DRAGGER 2021-02-25 17:18:23 +01:00
Tomasz Wlostowski 0306d16748 router: make post-drag optimization less intrusive 
Fixes: #5918
 2021-02-25 17:18:23 +01:00
Tomasz Wlostowski 14ce7a0ad7 router: implement area constraint in optimizer 2021-02-25 17:18:23 +01:00
Tomasz Wlostowski 64cf593ee9 router: debug points now have variable size 2021-02-25 17:18:23 +01:00
Jeff Young caa18c8e16 Fix bugs in diffPair hole-to-hole logic and add rule resolution. 
Fixes https://gitlab.com/kicad/code/kicad/issues/7697
 2021-02-25 14:23:02 +00:00
Jeff Young fa89263c8f Push hole-to-hole min processing down a level. 
Also removes adding the track width to the via gap, which was
never right.

Fixes https://gitlab.com/kicad/code/kicad/issues/7173
 2021-02-24 21:42:00 +00:00
Jeff Young 7f892669cc Consistent punctuation. 2021-02-23 12:46:27 +00:00
Marek Roszko c12666ec43 Fix arg type of NODE::followLine 2021-02-20 11:58:55 -05:00
Marek Roszko 6fce39607e Fix return type within pointInside2 2021-02-20 11:58:55 -05:00
jean-pierre charras d0b91b1106 Router, place via: fix issue created by 45b2bc: cancelling via must be made 
only when the select layer is called.
Fixes #7606
https://gitlab.com/kicad/code/kicad/issues/7606
 2021-02-19 17:28:20 +01:00
Seth Hillbrand 54282dffe3 Move preview items using FP orientation 
Fixes https://gitlab.com/kicad/code/kicad/issues/7600
 2021-02-18 16:32:40 -08:00
Jeff Young 45b2bce698 Cancel placement of via if user cancels layer selection. 
Fixes https://gitlab.com/kicad/code/kicad/issues/7578
 2021-02-18 11:53:36 +00:00
jean-pierre charras 5d2dc0b50e Fix a few (minor) issues: 
- Make DIALOG_SHIM::SetPosition working)
- rename PCB_BASE_FRAME::SelectLayer() to PCB_BASE_FRAME::SelectOneLayer()
- PCB_BASE_FRAME::SelectOneLayer(): make dismiss dialog by escape key working.
Fixes #7578
https://gitlab.com/kicad/code/kicad/issues/7578
 2021-02-17 20:56:43 +01:00
Jon Evans 0198d5a3bd PNS: don't lose track of pad offset when dragging footprints 
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7500
 2021-02-16 19:47:52 -05:00
Seth Hillbrand 9212197c26 Grammar 2021-02-15 15:18:13 -08:00
Jeff Young e2f8b1a4b1 Interpreting wxDialog::ShowModal()'s retval as bool is never what you want. 
Fixes https://gitlab.com/kicad/code/kicad/issues/7454
 2021-02-08 17:40:57 +00:00
Jeff Young 6272b48481 Make sure layer gets passed in to rules evaluation. 2021-02-08 14:53:49 +00:00
Jeff Young 7aa7e3fd43 Push undo/redo blocking down a level in LengthTuner tool. 
This way it's active only while tuning a single line, rather than
while the tool is selected.

Fixes https://gitlab.com/kicad/code/kicad/issues/7462
 2021-02-08 14:15:46 +00:00
Seth Hillbrand 792904557e Remember Parent data when routing 
Keeps parent information such as UUID and pad removal options for
elements that are just updated in routing rather than created fresh or
fully destroyed.

Fixes https://gitlab.com/kicad/code/kicad/issues/7460
 2021-02-07 17:08:43 -08:00
Jon Evans 721bf82603 Handle malformed lines in dragCornerInternal 
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7398
 2021-02-03 20:55:22 -05:00
Jeff Young d7ddc62d7e Fix mouse warping and dialog placement for layer switcher. 
Fixes https://gitlab.com/kicad/code/kicad/issues/2607
 2021-02-02 17:20:01 +00:00
Marek Roszko dc4b73fcef Correct m_board check location in PNS_KICAD_IFACE_BASE::SyncWorld 2021-02-01 11:58:22 -05:00
Seth Hillbrand 73886aecb1 Ensure partially triangulated polys are not valid 
Moves rule area triangulation outside of layer iterator and keeps the
triangulation_valid flag false until the triangulation has been
completed.

Fixes https://gitlab.com/kicad/code/kicad/issues/7032
 2021-01-29 16:33:57 -08:00
Wayne Stambaugh 6a39b81647 Fix the last of broken Doxygen comment specifiers. 2021-01-27 17:39:44 -05:00
Mikołaj Wielgus 3e42ba18a9 Show dragging tools in context selection menu for components 
Show the dragging tools in the context selection menu when a single
component is selected. Prevent the dragging tools from appearing when
more than one object is selected, as they will not activate anyway.

Fixes https://gitlab.com/kicad/code/kicad/issues/7258
 2021-01-27 19:55:42 +00:00
Jon Evans b96bcc86b1 Don't restrict start item to same layer if snapping is enabled 
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7276
 2021-01-25 21:19:26 -05:00
Jeff Young 3fcd0860c1 Make 'E' go straight to Custom Track Width dialog. 
Also fixes some mouse capture issues.

Fixes https://gitlab.com/kicad/code/kicad/issues/7198
 2021-01-20 18:19:55 +00:00
Jon Evans 330d717c69 Fix typo 2021-01-18 21:50:26 -05:00
Ian McInerney 44655b98de Initialize variables properly 2021-01-18 18:35:10 +00:00
Jeff Young 68efdb2fff Push shared parts of GRID_HELPERs into common. 2021-01-16 23:18:10 +00:00
Jeff Young 02ccd5fbdb Make sure properties commands don't go to other tools during routing. 
Brings up the track widths (or diff pairs) context menu instead,
which seems to be the closest parallel.

Fixes https://gitlab.com/kicad/code/kicad/issues/7099
 2021-01-14 15:19:09 +00:00
Dominik Wernberger dc02ec9758 Remove a few const_cast 2021-01-12 20:51:31 +00:00
Jon Evans 111fa99f9f PNS: Use last-segment posture optimization always 
Also when auto-posture is enabled, don't flutter
until area threshold has been met.

Fixes https://gitlab.com/kicad/code/kicad/-/issues/6935
 2021-01-07 20:12:31 -05:00
hoijui 6ca9a42251 Removes 3 other instances of a potential encoding problem 
Signed-off-by: hoijui <hoijui.quaero@gmail.com>
 2021-01-07 17:36:49 +00:00
Jeff Young e41c06304b Don't show a leading ratline to a NPTH. 
Fixes https://gitlab.com/kicad/code/kicad/issues/6960
 2021-01-07 12:25:04 +00:00
Jeff Young f702b64b8d Minor improvements to formatting & SNR. 2021-01-07 12:25:04 +00:00
Jon Evans 0234b7278a PNS: Make DIRECTION_45 North be up everywhere 
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6935
 2021-01-06 21:47:06 -05:00
Jon Evans 46c4727783 Make MSVC happy again 2021-01-05 20:56:37 -05:00
Jon Evans e7b047660c PNS: Correctly assemble lines with reversed arcs 2021-01-05 17:57:21 -05:00
Jon Evans feda03f69b PNS: Fix arc orientation when assembling lines with backwards arcs 2021-01-05 17:57:21 -05:00
Jon Evans 7431d5c985 PNS: First pass at updating meander placers for arcs 
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6464
 2021-01-05 17:57:21 -05:00
Jon Evans 8619086cf2 PNS: re-enable optimization of colinear segs in lines with arcs 2021-01-05 17:57:21 -05:00
Jon Evans 8901e71fc8 PNS: Fix loop removal, make walkaround less broken for arcs 2021-01-05 17:57:21 -05:00
Jeff Young 02cd8c99cd Better error messages when routing can't be started. 
Fixes https://gitlab.com/kicad/code/kicad/issues/6541
 2021-01-05 18:47:58 +00:00
Jeff Young 88d42724e6 Remove diff-pair-gap handling from single-line-router. 
We can't really support it until we do min/max/opt shoving and
dragging.

Fixes https://gitlab.com/kicad/code/kicad/issues/6932
 2021-01-05 16:54:52 +00:00
Jeff Young d975f2f6aa Commenting and naming for clarity. 2021-01-05 16:54:52 +00:00
Jeff Young f7b20611c1 Enforce hole-to-hole min when placing diffpair vias. 
Fixes https://gitlab.com/kicad/code/kicad/issues/6931
 2021-01-05 00:26:49 +00:00
Jeff Young 93bd2171ab Formatting. 2021-01-05 00:26:49 +00:00
Jeff Young d24b034cbc Cleanup (and a minor performance improvement). 2021-01-04 22:32:29 +00:00
Jeff Young 2ea6bc5529 Formatting. 2021-01-04 19:19:55 +00:00
Jeff Young 648c42f643 Show collisions preventing routing from starting. 
Also introduces a callback to the infobar so that the view can be
cleaned up when the timer expires.

Fixes https://gitlab.com/kicad/code/kicad/issues/6930
 2021-01-04 19:19:55 +00:00
Jeff Young 71215bcab3 Make sure TH pads get collision layer highlighted. 
Also cleans it up to centralise all the decision-making.

Fixes https://gitlab.com/kicad/code/kicad/issues/6925
 2021-01-03 21:16:09 +00:00
Jon Evans f01297fedd Convert an annoying message box to an infobar 2021-01-02 22:14:10 -05:00
Jeff Young 8b849b1c49 Fix several bugs in hull push-back with vias. 
1) take hole plating thickness into account
2) build hulls specifically for via so pushing back to the hull doesn't
have to try and figure out how much extra to push back for the via
and/or hole
3) clear MK_HOLE flags when colliding with the pad itself so that we
don't get stuck in HOLE mode
4) move flag setting/clearing to updateNearest() so that it will keep
track of the state of the nearest collision

Fixes https://gitlab.com/kicad/code/kicad/issues/6913
 2021-01-02 19:14:44 +00:00
Jeff Young 13094fdc28 Formatting. 2021-01-02 18:38:17 +00:00
Jeff Young 85e42890c4 Distinction between via and via hole probably not useful. 
Fixes https://gitlab.com/kicad/code/kicad/issues/6913
 2021-01-02 16:41:09 +00:00
Jeff Young 068af7d328 When routing don't give NPTH holes a copper clearance. 
Fixes https://gitlab.com/kicad/code/kicad/issues/6903
 2021-01-02 16:33:51 +00:00
Jon Evans eba7cb222c PNS: Fix initial posture guess for pads 2021-01-02 10:32:15 -05:00
Jeff Young 6b6694f55f Fix typo. 
Fixes https://gitlab.com/kicad/code/kicad/issues/6913
 2021-01-02 15:04:30 +00:00
Jeff Young 42c114f6ed Record status of via dragging in Walkaround mode. 
Fixes https://gitlab.com/kicad/code/kicad/issues/3967
 2021-01-02 00:31:02 +00:00
Jeff Young 8a049cf290 Make sure bounding boxes get cached on rule areas. 
Fixes https://gitlab.com/kicad/code/kicad/issues/6898
 2021-01-01 23:17:49 +00:00
Jeff Young 018c17399d SNR. 2021-01-01 23:17:49 +00:00
Jeff Young fc1b0ec11f Improve feedback when routing in highlight collisions mode. 
In particular, when Allow DRC violations is NOT turned on and we
bump in to an obstacle.
 2021-01-01 17:25:37 +00:00
Jeff Young 3ba17e0a16 Formatting. 2021-01-01 01:02:06 +00:00
Jeff Young ecc0e861d3 Implement hole clearance and hole-to-hole clearance in router. 
Fixes https://gitlab.com/kicad/code/kicad/issues/6882
 2021-01-01 00:31:36 +00:00
Jeff Young 5d8e6020d1 Improve clarity. 2021-01-01 00:31:36 +00:00
Jeff Young 0e3c9de684 Formatting. 2021-01-01 00:31:36 +00:00
Jeff Young 1b93663627 Formatting. 2021-01-01 00:31:36 +00:00
Jon Evans 9a0f685a75 PNS: Consider arcs when searching for lines between joints 2020-12-31 13:05:43 -05:00
Jon Evans 73248ab219 PNS: correct initial segment direction for posture solver 2020-12-31 13:05:43 -05:00
Jon Evans 60fd7fdbb2 Fix comment 2020-12-30 18:52:56 -05:00
Jon Evans 510db66f0e PNS: Fix rollback for arc traces 
PNS: Update posture solver after rollback
 2020-12-30 18:23:24 -05:00
Jon Evans 6105ac50da ADDED: Default hotkey of CTRL+/ for switch corner rounding 2020-12-30 18:23:24 -05:00
Jon Evans b5b64a55ad PNS: Only run optimization if lastNode is valid 2020-12-30 18:23:24 -05:00
Jon Evans 79502a0d88 PNS: A new approach to arc placement 
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6334
 2020-12-30 18:23:24 -05:00
Jon Evans bf9501e1d4 PNS: Fix auto-posture when placing via 2020-12-29 21:14:36 -05:00
Jon Evans 689da3794d PNS: Merge co-linear segments during placement 2020-12-29 21:14:36 -05:00
Jon Evans 4c0aa6db1a PNS: Disable smart pads optimization for vias 
There is not much point with the current algorithm and it
breaks auto-posture.
 2020-12-29 21:14:36 -05:00
Jon Evans 81d4e06f00 PNS: Consider pad orientation when routing 
PNS: Skip smart pads when posture was manually forced

This allows a more-correct pad breakout to be chosen when
smart pads is off.
 2020-12-29 01:06:46 -05:00
Jon Evans 96d49d1473 PNS: Improved auto-posture when starting from a segment 
The previous auto-posture algorithm worked great for pads
but not so great when starting routing from a segment.

Now we can optimize the posture based on the starting
segment if one exists, to maximize the "obtuseness" of the
posture.
 2020-12-28 23:51:13 -05:00
Jon Evans 3adff647a7 PNS: Preserve nearest vertex when dragging in shove mode 2020-12-28 19:44:39 -05:00
Jon Evans be294dabce PNS: Snap back to last valid point when committing a drag 
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6651
 2020-12-28 16:36:42 -05:00
Jon Evans 3c87e67753 PNS: Allow committing routes even when cursor moves beyond valid solution 
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6651
 2020-12-27 17:14:38 -05:00
Jon Evans 2cdf9875b9 PNS: fix off-by-one in dragCorner45 
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6644
 2020-12-27 15:58:36 -05:00
Jon Evans c615b7a49b PNS: make initial direction behavior consistent with fix-all enabled 2020-12-27 15:21:55 -05:00
Peter Montgomery 1c79e3174c Pcbnew: Prevent footprint jumping when starting to drag it 
CHANGED: When dragging a footprint, if the mouse isn't directly over the
footprint anchor when 'D' is pressed, the footprint center will jump to
the mouse position when dragging begins.  This MR uses the current
mouse position instead of the footprint anchor as the inital reference
point when starting to drag.

Fixes https://gitlab.com/kicad/code/kicad/issues/6813
 2020-12-27 17:43:52 +00:00
Jon Evans 8ad89ae457 PNS: fix manual posture mode 2020-12-24 17:31:54 -05:00
Jon Evans 8a2667c4c3 PNS: Fix all segments by default (and make optional) 
Fixes https://gitlab.com/kicad/code/kicad/-/issues/5920
 2020-12-23 21:55:43 -05:00
Jon Evans 8c247fc97c PNS: Add a setting to disable posture solver 
PNS: Prevent autoposture flutter when trail has little area

Fixes https://gitlab.com/kicad/code/kicad/-/issues/6797
 2020-12-23 21:02:17 -05:00
Jon Evans 912657dd23 Component dragger: make relaxed segment pickup work for PTH pads 2020-12-22 22:43:44 -05:00
Jon Evans 70c6314c67 Component dragger: be more generous about picking up tracks 
We now pick up tracks that end anywhere in the pad, not just
at the pad anchor.

Fixes https://gitlab.com/kicad/code/kicad/-/issues/5945
 2020-12-22 22:28:24 -05:00
Jon Evans 70c397a9b4 Implement free vias fully 
CHANGED: manually-placed (stitching) vias won't have their nets automatically updated
(unless the via is placed directly on a track segment)

CHANGED: stitching vias can be placed on footprint pads and pick up their nets

Fixes https://gitlab.com/kicad/code/kicad/-/issues/5484
 2020-12-20 16:29:50 -05:00
Jeff Young cd162a8f58 Honour m_placingVia when avoiding collisions. 
Fixes https://gitlab.com/kicad/code/kicad/issues/3773
 2020-12-20 20:36:19 +00:00
Jon Evans e8f38e3c18 Snap to footprint origin when dragging 
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6633
 2020-12-20 15:15:48 -05:00
Jon Evans ac793618f9 Set start item for inline dragging so that snapping works properly 
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6796
 2020-12-20 11:13:09 -05:00
Jeff Young 46314f6483 Only compare collision-corrected routes when looking for shortest. 
Fixes https://gitlab.com/kicad/code/kicad/issues/6511
 2020-12-19 23:20:27 +00:00
Jeff Young acfbcb4beb Make distinction between PCBNew-wide tools and Board-specific tools. 
The old names were really hard to keep straight (even for me, who named
many of them).
 2020-12-16 13:32:46 +00:00
Jeff Young 5f9ed2583c Don't put up double lock confirmation dialogs. 
Also removes EditToolSelectionFilter which was misused in more places
than it was used correctly.  The original point of the client filter
was to move the logic to the point of use, which the
EditToolSelectionFilter sort of obviated anyway.

Fixes https://gitlab.com/kicad/code/kicad/issues/6751
 2020-12-15 22:34:24 +00:00
Jeff Young c0a9742b3a Apply 0ef63aca47 to diff pairs. 
Fixes https://gitlab.com/kicad/code/kicad/issues/6314
 2020-12-12 03:43:41 +00:00
Wayne Stambaugh dd4298bb94 Coverity fixes: 280374, 313611, 313648, 313649, and 314720. 2020-12-11 13:29:52 -05:00
Jeff Young 0ef63aca47 Don't reset tail when changing track width/via sizes. 
Fixes https://gitlab.com/kicad/code/kicad/issues/6314
 2020-12-11 17:58:36 +00:00
Jeff Young 7cb2d19814 Honour alt-means-disable-grid-snapping in router. 
Fixes https://gitlab.com/kicad/code/kicad/issues/6679
 2020-12-11 13:11:47 +00:00
Jeff Young d304f12284 Formatting. 2020-12-11 12:48:04 +00:00
Jeff Young 73b7b104cd Fix some issues with Infobar sizing. 
This also commits to the new strategy as it wasn't really compatible
with if-def-ing anymore.
 2020-12-11 12:39:40 +00:00
Ian McInerney be4b6ec06a Cleanup compiler warnings 2020-12-09 23:13:33 +00:00
Jeff Young b1f0bf7334 More consistent naming. 2020-12-08 13:05:39 +00:00
Jeff Young aa3e29ee7c Don't re-enter router on subsequent X key. 
Fixes https://gitlab.com/kicad/code/kicad/issues/6656

Fixes https://gitlab.com/kicad/code/kicad/issues/4504
 2020-12-08 00:13:29 +00:00
Jeff Young f09ca9ceee Pass unhandled events when dragging in the router tool. 
Fixes https://gitlab.com/kicad/code/kicad/issues/6630
 2020-12-06 12:30:29 +00:00
Jeff Young 7b347d793b Change gears on no-connect net generation. See bug rpt. 
Fixes https://gitlab.com/kicad/code/kicad/issues/6534

Fixes https://gitlab.com/kicad/code/kicad/issues/6615
 2020-12-04 18:25:48 +00:00
Jeff Young 00edc85f4f Allow layer switching when routing from pad. 
Additionally, don't process layer events from both main loop and
transitions -- it makes for a mess.

Fixes https://gitlab.com/kicad/code/kicad/issues/4832
 2020-12-02 21:17:56 +00:00
Jeff Young f2ac6fcd44 Treat net 0 items as each being in their own net. 
Fixes https://gitlab.com/kicad/code/kicad/issues/6534
 2020-12-02 20:05:47 +00:00
Jeff Young d06d35a74d Formatting. 2020-12-02 20:05:47 +00:00
Jeff Young 288ab7ed6f Minor formatting cleanup. 2020-12-01 14:04:01 +00:00
Jeff Young 06b9439dbf Edge Cuts shapes have zero width. 
Fixes https://gitlab.com/kicad/code/kicad/issues/6517
 2020-11-26 17:42:46 +00:00
Jeff Young 9c7c05c161 Mostly formatting cleanup but a few type-casting cleanups too. 2020-11-24 22:16:41 +00:00
jean-pierre charras 976c6262f4 French translation update (fix also trailing spaces in a few sentences) 2020-11-23 11:42:25 +01:00
qu1ck b32c2a6c90 Refactor EDA_TEXT::TransformToSegmentList() to return a vector of points 
This allows reading text object as it is rendered through python API.
 2020-11-23 07:50:54 +00:00
Jeff Young ff3bd7e72a Fix a crash bug in DRC, and equate Margin to Edge.Cuts. 2020-11-20 21:22:27 +00:00
Jeff Young 9e9946628a Go back to arrow cursor on a cancel (or finish). 
Fixes https://gitlab.com/kicad/code/kicad/issues/6421
 2020-11-19 20:09:28 +00:00
Dominik Wernberger 99da663e82 Remove unused variables plus some more fixes from CppCheck 
Remove unused variables plus a few more fixes from CppCheck

Remove unused variables plus a few more fixes from CppCheck
 2020-11-19 02:28:47 +00:00
Werni 0e44f5128c Add const specifiers 2020-11-18 19:50:36 +00:00
Jeff Young 795e45836d Fix assert in DRC. 2020-11-17 17:41:57 +00:00
Jeff Young 7bd31d5237 Naming conventions. 2020-11-14 18:26:03 +00:00
Jeff Young ec020dd19f First-class support for filled shapes. 2020-11-14 01:40:32 +00:00
Jeff Young bdbb68f813 MODULE -> FOOTPRINT. 2020-11-13 16:04:03 +00:00
Jeff Young 3451ac3088 PCB_MODULE_T -> PCB_FOOTPRINT_T 2020-11-13 15:16:24 +00:00
Jeff Young 52a46341db More module -> footprint. 2020-11-13 15:16:24 +00:00
Jeff Young f5443de7f9 D_PAD -> PAD. 2020-11-13 15:16:24 +00:00
Jeff Young 84dd5108ba Remove some "class_" prefixes from files. 2020-11-13 15:16:23 +00:00
Jeff Young f7333ad64a Update some classnames including archaic zone names. 2020-11-12 10:31:25 +00:00
Jeff Young da5cfb5df1 Improve commenting. 2020-11-11 17:52:15 +00:00
Jeff Young 5e569e81e7 Performance enhancements for PNS. 2020-11-11 15:32:30 +00:00
Ian McInerney d88eaaf477 Fix various compiler and Coverity warnings 2020-11-11 00:41:02 +00:00
Jeff Young ce3b2921bd Sort potential start candidates by distance from cursor. 
Fixes https://gitlab.com/kicad/code/kicad/issues/1926
 2020-11-10 23:50:57 +00:00
Jeff Young bd63c018c9 Don't snap synthetic priming event. 
We need to let the consumer of the event do snapping (so that, for
instance, it can also snap to tracks, pads, etc.)

Fixes https://gitlab.com/kicad/code/kicad/issues/4365
 2020-11-09 17:21:47 +00:00
Jeff Young 64876a2761 PNS_DRAGGER should report its layers. 
Also, don't use ViewGetLayers() for visibility checking.  For some
things (like vias) it deals with synthetic layers, not board layers.

Fixes https://gitlab.com/kicad/code/kicad/issues/6328
 2020-11-08 17:19:37 +00:00
Jeff Young 81ea71fb80 More safety when fetching via sizes. 2020-11-07 18:50:30 +00:00
Jeff Young ae9afdd169 SNR. (Mostly for progammers, but a little for user messages.) 2020-11-02 16:20:00 +00:00
Jeff Young 76ac8b5acf Preflight routing so we can give a warning if it's not going to work. 
Fixes https://gitlab.com/kicad/code/kicad/issues/4975
 2020-11-02 00:10:21 +00:00
Jeff Young 8bfb255c96 Put a warning when routing can't start due to DRC violation. 
Fixes https://gitlab.com/kicad/code/kicad/issues/4975
 2020-11-01 23:46:42 +00:00
Jeff Young 409cd9d4ee Formatting. 2020-11-01 20:25:36 +00:00
Jeff Young f6c92ab1ea DRAGGER needs to report it's nets. 
Otherwise things like snapping don't work.

Fixes https://gitlab.com/kicad/code/kicad/issues/4147
 2020-11-01 19:57:42 +00:00
Jeff Young a95e2184da A more generic error message when route start pt violates DRC. 
Fixes https://gitlab.com/kicad/code/kicad/issues/1812
 2020-11-01 18:23:07 +00:00
Jeff Young 2c1b6e42e0 Repair ARC copy constructor. 
Fixes https://gitlab.com/kicad/code/kicad/issues/6176
 2020-11-01 00:10:08 +00:00
Jeff Young fab87fb97b Handle proxy items for the second PNS_ITEM as well. 
Fixes https://gitlab.com/kicad/code/kicad/issues/6193
 2020-10-31 23:23:54 +00:00
Jeff Young 843974b0bf Cleanup and formtting. 2020-10-31 15:50:06 +00:00
Jeff Young ba4d711356 I should have known better than to use a global.... 
When the board is closed and reopened the dummy items belong to a
freed board.
 2020-10-31 15:50:06 +00:00
Jeff Young c17ceb5875 Make sure proxy items at least get the right net for clearance lines. 
Fixes https://gitlab.com/kicad/code/kicad/issues/5980
 2020-10-30 23:37:35 +00:00
Werni a7d5d1f091 Add more consts all over the place 2020-10-27 11:03:35 +00:00
Ian McInerney 31e626f279 Cleanup creation of all our smart pointers 2020-10-26 23:52:44 +00:00
Marek Roszko a785f70ea1 msgpanel is a widget, shove it to the right folder. 2020-10-25 20:01:12 -04:00
jean-pierre charras d6f91c810f Fix a few compil and Coverity warnings. 2020-10-25 10:02:07 +01:00
Marek Roszko 81a7afc76e Use kicad_algo directly rather than common.h 2020-10-24 08:53:11 -04:00
Marek Roszko 8d7feb3d72 Nip some common.h from headers 2020-10-24 08:28:03 -04:00
Seth Hillbrand 4085757aeb Remove beginning/ending spaces in translations 
Adding space padding makes translations more difficult by increasing
string counts
 2020-10-20 12:08:04 -07:00
Jeff Young 3045dbd6e8 Minor code clean-up. 2020-10-20 13:38:09 +01:00
Jeff Young d7ea70ba02 Don't assume a valid constraint. 
Fixes https://gitlab.com/kicad/code/kicad/issues/6059
 2020-10-18 20:58:53 +01:00
Jeff Young 02cbcb99df Fix broken logic in ImportSizes(). 
Fixes https://gitlab.com/kicad/code/kicad/issues/6049
 2020-10-18 12:08:16 +01:00
Jeff Young 827699bed2 Just because we have a startItem doesn't mean it can find a width. 
For instance, a pad with no other tracks attached will return 0.

Fixes https://gitlab.com/kicad/code/kicad/issues/6019
 2020-10-17 13:57:07 +01:00
Jeff Young 23d9e2e74a New rules engine needs non-connected items as well. 2020-10-17 13:52:18 +01:00
Jeff Young 1ee3df61c9 Improve robustness of infobar button handling. 2020-10-16 17:07:59 +01:00
Jeff Young eea7957e16 Inform user of bad DRC rules when filling zones. 
ADDED: facility for hypertext links in infobar.

Also made use of this for via constraint errors when routing.

Fixes https://gitlab.com/kicad/code/kicad/issues/5800
 2020-10-16 12:44:20 +01:00
Marek Roszko 9656bd310b Remove eda_item and gr_basic from eda_text.h 2020-10-13 22:46:39 -04:00
Jon Evans cea73fe510 Restore net highlighting to router tool 
Fixes https://gitlab.com/kicad/code/kicad/-/issues/5962
 2020-10-13 20:30:38 -04:00
Jon Evans fd4b9f0efa PNS: ratlines need to not be debug graphics 
Fixes https://gitlab.com/kicad/code/kicad/-/issues/5995
 2020-10-13 20:04:47 -04:00
Tomasz Wlostowski ac8b072284 router: fix assertion failure when starting a route on an empty board 2020-10-13 19:36:36 +02:00
Jeff Young 44dbe3577b Create proxy items for PNS when needing to query clearances. 
Fixes https://gitlab.com/kicad/code/kicad/issues/5929
 2020-10-12 20:59:19 +01:00
Michael Kavanagh c40483d18a Cleanup: Move KiCad files into plugins folder 2020-10-12 16:36:08 +00:00
Jeff Young b92cb5c930 Hook up PNS via command to new rule system. 
Fixes https://gitlab.com/kicad/code/kicad/issues/5951
 2020-10-12 00:14:32 +01:00
Jeff Young bcebb19665 Add implied diffpair netclass rules. 2020-10-11 13:19:23 +01:00
Jeff Young 79f91481f3 Fix missing break stmt. 2020-10-11 01:11:55 +01:00
Jeff Young f680ff17d6 Need an item to pick a netclass value. 2020-10-11 00:14:42 +01:00
Jeff Young 22cde88ba9 Allow chamfering/filleting of zone/board edge intersections. 
Fixes https://gitlab.com/kicad/code/kicad/issues/5947
 2020-10-10 23:09:43 +01:00
Jeff Young 04c4012ee6 Make track/via sizes UI more predictable and compatible with DRC. 
Two main changes: netclass values need to go through the DRC engine
so they can interact with other rules.  They're also now dependent
on the layer being routed as well as the start object.

Also make the controls adjust to each other better.  For instance,
copy-track-width needs to turn off when you select a particular
track width, and a particular track width needs to zero out when
you choose copy-track-width.

Fixes https://gitlab.com/kicad/code/kicad/issues/5951
 2020-10-10 19:32:30 +01:00
jean-pierre charras c5f01501c1 PnS, router/router_preview_item: fix incorrect size of SH_RECT shape when drawing it. 
The width of the rectangle was used instead of the width of outline (usualy 0) to
draw the shape (when dragging the pad for instance)

Fixes #5944
https://gitlab.com/kicad/code/kicad/issues/5944
 2020-10-10 10:03:23 +02:00
Jeff Young b31470012a Previous check didn't account for router dragging. 2020-10-09 14:30:55 +01:00
Jeff Young 2ca819a627 Don't assume a DRC_CONSTRAINT has a parent rule. 
It will still have a name, though.
 2020-10-09 14:26:09 +01:00
Jeff Young 1cb0cbff2e Fix crash when router gets notifed but has no current m_placer. 
Fixes https://gitlab.com/kicad/code/kicad/issues/5935
 2020-10-09 14:26:04 +01:00
Jon Evans 966730710e Partial fix for routing with no start item 2020-10-08 20:38:08 -04:00
Tomasz Wlostowski 38cef95da9 router: initial support for V6 Design Rules (width/clearance/diff pair width/diff pair gap). Still a lot of work to do! 2020-10-09 00:01:26 +02:00
Tomasz Wlostowski 9bef95418e router: wip on less intrusive dragged trace optimization 2020-10-09 00:01:26 +02:00
Tomasz Wlostowski 5e4fb46aef MINOPTMAX: added OptThenMin() method as syntax sugar 2020-10-09 00:01:26 +02:00
Marek Roszko f5e0754f65 Use the setCursor lambda pattern and fix up the initial cursor states 2020-10-07 23:26:14 -04:00
Mark Roszko d9485129c8 Implement more context specific cursors using both stock and custom cursors. 2020-10-08 00:50:28 +00:00
Tomasz Wlostowski eb8287ded8 router: bring back legacy GetEffectivePolygon() for complex pad shapes (more info in comments) 2020-10-07 16:36:37 +02:00
Jeff Young d23d5510e7 Restore a side-effect that the router appears to depend on. 2020-10-06 00:07:34 +01:00
Jeff Young 35fa857fd8 Make sure router tool passes events it doesn't handle. 
Fixes undo/redo when router tool is active but not routing.
 2020-10-05 23:16:37 +01:00
Jeff Young 18a3c4c1db Fix some fairly catastrophic bugs in shape collision optimization. 
I did a little too much copy & paste last time around....
 2020-10-05 22:32:07 +01:00
Jeff Young 6d50c9749c Mark the colliding shape so we know which one to highlight. 
Also checks the nets when checking for a pad being flashed on a particular
layer (so we don't end up thinking the currently-routing-collided track
is a connection).
 2020-10-05 22:32:07 +01:00
Jeff Young d063c56971 Move PNS pad solids to COMPOUND_SHAPE. 
Also fixes plated holes solids to include plating thickness.
 2020-10-05 22:32:07 +01:00
Jeff Young 37906511f5 Class renaming. 
DRAWSEGMENT  -> PCB_SHAPE
EDGE_MODULE  -> FP_SHAPE
TEXTE_PCB    -> PCB_TEXT
TEXTE_MODULE -> FP_TEXT
 2020-10-05 11:55:33 +01:00
Mark Roszko a28a0e14ba Fix conversion warnings 2020-10-05 10:41:14 +00:00
Jeff Young 7a4900b8dc PCB_LINE_T -> PCB_SHAPE_T and PCB_MODULE_EDGE_T -> PCB_FP_SHAPE_T 
Also updated footprint text and zone types for consistencey.
 2020-10-04 16:49:04 +01:00
Jeff Young bb753aaadf Clean up terminology around active & high contrast layers. 2020-10-03 22:55:34 +01:00
Mikolaj Wielgus 400c15b8eb Add mils to units, remove useMils variables 2020-10-03 20:06:56 +00:00
Jon Evans 6f54a9982c Remove PCB_LAYER_WIDGET 2020-09-30 19:12:26 -04:00
Seth Hillbrand bf3cb0b1d0 Standardize pad type enums 2020-09-30 08:38:35 -07:00
Jeff Young d3f8f2b81e Remove confusion between pad->IsOnLayer and pad->IsPadOnLayer 2020-09-30 11:50:51 +01:00
PJM 258d1a1971 Pcb: Get proper "Break Track" location when invoked from RMB context menu 
When invoking "Break Track" from the RMB context menu, Pcbnew
gets and uses the current position of the mouse to figure out where to
break the track.  The problem is that the mouse has to be moved to select
the "Break Track" menu item, and the mouse position used is wrong.  This
can result in the break in the wrong location or not happening at all.

CHANGED: This commit determines if the "Break Track" was invoked from a
context menu or a hotkey.  If a hotkey, it uses the current mosue position.
If a context menu, it uses the original postion of the mouse when the menu
was opened.
 2020-09-28 16:56:02 +00:00
Jeff Young f8875bc5a6 Move std::contains to alg::contains. 2020-09-26 14:42:40 +01:00
Jeff Young d7e80f8008 Add std::contains() to simplify a lot of code. 2020-09-26 12:40:32 +01:00
Ian McInerney bba29a1036 Always show the track and via menu in the router context menu 2020-09-25 00:17:54 +01:00
Ian McInerney 672756a018 Move the router tools to a TOOL_MENU context menu 
The previous way of displaying a context menu was being
usurped by the selection tool because it was displaying its
menu before DispatchContextMenu was called, and all other tools
explictly use the TOOL_MENU system.

Fixes https://gitlab.com/kicad/code/kicad/issues/5762
 2020-09-24 23:51:34 +01:00
Jon Evans 18e17abd6a Rename "Keepout" to "Rule Area" 
These objects can now be used in advanced DRC rules and
not just for keeping things out.  Also remove the restriction
that at least one of the "basic" keepout rules must be set,
so that these areas can be used for more advanced rules.
 2020-09-21 23:55:02 -04:00
Jeff Young ece2ae9805 Don't capture commands in the router eventloop that it doesn't process. 
Fixes https://gitlab.com/kicad/code/kicad/issues/5692
 2020-09-19 12:08:18 +01:00
Seth Hillbrand f493e270ea ADDED: Menu option to enable/disable snap to grid 
You can now enable and disable snap to grid when drawing/editing across
all apps.  You can also tie snap to grid to the visibility of the grid
to allow rapid enable/disable via grid display.
 2020-09-10 20:09:30 -07:00
Seth Hillbrand 173b4ff588 Add snapping to eeschema 
This generalizes both the SetPosition() function and ORIGIN_VIEWITEM
class away from the pcbnew-centric.
 2020-09-09 10:18:15 -07:00
Tomasz Wlostowski 54ca66be72 router: NODE::AllItemsInNet() can now filter by item type 2020-09-08 01:31:42 +02:00
Tomasz Wlostowski f2338d9faa router: fix segfault with NPTH holes in COMPONENT_DRAGGER 2020-09-08 01:31:42 +02:00
Jeff Young 88635ee5b6 Clean up error messages. 
Convert a lot of nags to InfoBar errors/warnings/messages, and some
that never should have been exposed to wxFAIL_MSGs.
 2020-08-31 14:19:57 +01:00
Jon Evans 7a5c99ee0f Tweak the mouse-based posture solver 
Add an epsilon to reduce flutter
Add a lock after a certain distance
Forget the old trail when unlocking

Fixes https://gitlab.com/kicad/code/kicad/-/issues/5381
 2020-08-30 19:54:09 -04:00
Jeff Young 8b7c0cbe04 Adjust footprint zones while dragging footprint. 2020-08-28 11:05:58 +01:00
Seth Hillbrand f4e8c194be Revise restriction on No Copper setting 
This allows the user to specify a NPTH with "No Copper", allowing a pad
to retain the mask layer without a copper landing.

Fixes https://gitlab.com/kicad/code/kicad/issues/3407

Fixes https://gitlab.com/kicad/code/kicad/issues/5237
 2020-08-26 18:09:06 +00:00
Seth Hillbrand adff7f749b PNS: Addition layer smarts 
Edge.Cuts have no parent but cross all layers, so we need to handle the
"all layers" case.  Also renames "IsPadOnLayer" to "IsOnLayer".

Fixes https://gitlab.com/kicad/code/kicad/issues/5351
 2020-08-25 09:42:50 -07:00
Seth Hillbrand 686af65a9b Fix issue generating alternate shape 
Boolean ops need boolean inputs.
 2020-08-22 08:04:03 -07:00
Jeff Young 842641308f Solids don't always have nets (even a defualt one). 
Fixes https://gitlab.com/kicad/code/kicad/issues/5290
 2020-08-21 20:08:12 +01:00
Seth Hillbrand 9a4f92dfd9 Ensure that all pads with holes have alts 
Alternate shapes for holes that are fallback clearance are needed in
case we have missing copper on any layer

Fixes https://gitlab.com/kicad/code/kicad/issues/5233
 2020-08-20 21:50:37 -07:00
Seth Hillbrand dd9f7c8c25 PNS: Add defensive coding to AlternateShape() 
Adds additional check/warnings about missing alternate shapes when they
are expected.

Fixes https://gitlab.com/kicad/code/kicad/issues/5233
 2020-08-19 09:02:06 -07:00
Wayne Stambaugh ede39780e2 Remove all debugging output that cannot be disabled. 
The use of printf, wxLogDebug, and std::err/std::out causes excessive
debugging output which makes finding specific debugging messages more
difficult than it needs to be.

There is still some debugging output in test code that really needs to
be moved into a unit test.

Add debugging output section to the coding policy regarding debugging
output.
 2020-08-18 10:17:36 -04:00
Seth Hillbrand 4cc820f550 PNS: skip hulls for layers where the solid isn't 
If we don't have an object on the required layer and there isn't a
through-hole (m_alternateShape), then we shouldn't return a hull

Fixes https://gitlab.com/kicad/code/kicad/issues/5233
 2020-08-18 06:53:03 -07:00
Seth Hillbrand 5c3a1d059e Fix memory mgmt issue with SOLID shapes 
We don't delete items from the CTOR but we do need to check if they
exist in the incoming SOLID before cloning

Fixes https://gitlab.com/kicad/code/kicad/issues/5214
 2020-08-17 06:16:11 -07:00
Seth Hillbrand afc94fdec3 PNS: Be better about handling multiple layers 
Rather than adding pads/vias multiple times for each layer, we introduce
the "alternate shape" idiom to PNS that allows us to optionally place
the collision constraint on the hole instead of the pad for those
vias/pads that have inner layers removed.

Fixes https://gitlab.com/kicad/code/kicad/issues/5158

Fixes https://gitlab.com/kicad/code/kicad/issues/5198

Fixes https://gitlab.com/kicad/code/kicad/issues/5195
 2020-08-16 12:39:15 -07:00
Jeff Young 57c3d8e8d8 Make sure preview group gets added to view after a clear. 2020-08-15 21:13:44 +01:00
Jon Evans bd14f8a82a ADDED: New appearance control widget for PcbNew 
Featuring:
- Layer view presets
- Per-type opacity for tracks, vias, pads, zones
- Net and netclass color and visibility controls

CHANGED: Simplified object visibilty controls

Fixes https://gitlab.com/kicad/code/kicad/-/issues/1951
Fixes https://gitlab.com/kicad/code/kicad/-/issues/1981
Fixes https://gitlab.com/kicad/code/kicad/-/issues/2003
Fixes https://gitlab.com/kicad/code/kicad/-/issues/2173
Fixes https://gitlab.com/kicad/code/kicad/-/issues/2254
Fixes https://gitlab.com/kicad/code/kicad/-/issues/4325
 2020-08-15 15:24:28 -04:00
Jeff Young 463100d67f Remove a long-standing hack to keep divots out of adjacent zones. 
The new algorithm unions any adjacent zones before doing the
chamfer/fillet and then subtracts the other zones back out afterwards.

Fixes https://gitlab.com/kicad/code/kicad/issues/3812
 2020-08-12 22:20:08 +01:00
Seth Hillbrand 9a66a5acad Cleanup code line endings 2020-08-10 03:27:27 +00:00
Seth Hillbrand 5fc6b74c89 ADDED: Remove unused pads 
This option removes copper layers from pads and vias where they are not
connected to other board elements.  This allows the inner layers to be
more closely routed if the via landing pad is not needed.

Fixes https://gitlab.com/kicad/code/kicad/issues/1835
 2020-08-10 03:27:26 +00:00
Ian McInerney 90a17427ee Give the length tuning tool an inital end point that isn't the start point 
Using the starting point as the end point means that the tool
initializes with 0 length traces and so nothing is visible.

Fixes https://gitlab.com/kicad/code/kicad/issues/1912
 2020-08-08 23:41:48 +01:00
Jeff Young 7cd8f710b6 Clean up unused includes. 2020-08-08 16:25:30 +01:00
Seth Hillbrand c57c168753 PNS: Remove items from all layers 
subIndices control which layers the items are inserted onto and removed
from.  The iterator to remove items needs to be inclusive of the
first/last layers

Fixes https://gitlab.com/kicad/code/kicad/issues/5090

Fixes https://gitlab.com/kicad/code/kicad/issues/5075

Fixes https://gitlab.com/kicad/code/kicad/issues/5034
 2020-08-05 19:39:55 -07:00
Jeff Young 73832a9708 Work around an event processing failure. 
Fixes https://gitlab.com/kicad/code/kicad/issues/4273
 2020-08-05 19:36:58 +01:00
Jeff Young e2ec9d9f00 A more fail-safe way to disallow editing while routing. 
Fixes https://gitlab.com/kicad/code/kicad/issues/4413

Fixes https://gitlab.com/kicad/code/kicad/issues/5067
 2020-08-05 16:51:58 +01:00
Jeff Young 59ba793096 Disable various combinations of router and editing commands. 
They just confuse each other.

Fixes https://gitlab.com/kicad/code/kicad/issues/5067
 2020-08-04 14:32:02 +01:00
Jeff Young 74b9cce682 Try again at dragging module edges. 
Fixes https://gitlab.com/kicad/code/kicad/issues/5037
 2020-08-03 23:53:45 +01:00
Jeff Young ef2388b5bb Fix issue with dragging flipped MODULE. 2020-08-02 17:05:13 +01:00
Jeff Young d586495c0a Preview fp edges & text while dragging in router. 
Fixes https://gitlab.com/kicad/code/kicad/issues/5037
 2020-08-01 15:40:34 +01:00
Tomasz Wlostowski 89a953e039 Migrated GetEffectiveShape(s) to SHAPE_COMPOUND 2020-07-29 23:14:03 +02:00
Tomasz Wlostowski 85aecc15ee router: fix mistake in 45/free-angle mode selection when dragging corners 2020-07-29 23:14:03 +02:00
Tomasz Wlostowski c2b9db293f router: prevent heap crash when initial walkaround line is empty 2020-07-29 23:14:03 +02:00
Seth Hillbrand 1f5fb979b9 Keep PNS item RTree on layer-by-layer 
Rather than extra splitting of the RTree that we use for collision
detection on types and direction, we limit this to checks on
layer-by-layer basis.  This also allows for layer expansion by using
deque of RTrees rather than fixed index

This fixes the missing layernumbers and keeps the layers in a deque to
prevent re-allocation on expansion.

Replaces ad94b6205
 2020-07-29 11:21:00 -07:00
jean-pierre charras f00c59c446 Fix a few Coverity warnings. 2020-07-29 09:26:57 +02:00
Seth Hillbrand ad94b6205a Revert "Keep PNS item RTree on layer-by-layer" 
This reverts commit a34d33c460.

The commit did not work properly for shove routing.  Will revist in
later commit
 2020-07-28 21:20:19 -07:00
Seth Hillbrand a34d33c460 Keep PNS item RTree on layer-by-layer 
Rather than extra splitting of the RTree that we use for collision
detection on types and direction, we limit this to checks on
layer-by-layer basis.  This also allows for layer expansion by using
vector of RTrees rather than fixed index
 2020-07-28 10:17:56 -07:00
Jeff Young 46602148dc Fix overly aggressive assert. 2020-07-28 13:35:37 +01:00
Jeff Young 4153309fba Add defensive code. 
Fixes https://gitlab.com/kicad/code/kicad/issues/4941
 2020-07-25 23:54:04 +01:00
Jeff Young bf445c1a95 Performance enhancements. 
1) cache pad polygon outlines
   huge improvement in connectivity performance and a decent
   improvement in DRC performance
2) don't pre-allocate CONTEXT stack
   significant improvement in DRC rule performance
2) don't keep re-encoding strings
   decent improvement in DRC rule performance
 2020-07-25 13:03:33 +01:00
Tomasz Wlostowski 70b98c3b49 router: dump entire event log + annotated PCB upon user request 2020-07-22 18:05:54 +02:00
Tomasz Wlostowski 379aa8f3b5 router: clearer distinction between LOGGER and DEBUG_DECORATOR classes. 
The first one keeps a log of events (start routing, mouse motion, etc).
The second allows for adding temporary debug drawings and messages which are stored synchronously with the events in LOGGER.

The event stream together with the PCB design (now with UUIDs) can be used to deterministically replay routing bugs as the user sees them.
 2020-07-22 18:05:54 +02:00
Tomasz Wlostowski 2a2e389a94 router: auto-guess track posture from mouse movements, experimental! 2020-07-22 18:05:50 +02:00
Tomasz Wlostowski fd07e94760 router: abstract segment links into a LINK_HOLDER interface. DIFF_PAIRS are now also linkable 2020-07-22 17:04:42 +02:00
Ian McInerney 450107e453 Remove if statement with duplicated branches in router 2020-07-22 00:18:30 +01:00
Jon Evans 2f31bf278b Fix layer hotkey dispatch 
Hotkeys received by more than one tool need AF_NOTIFY
 2020-07-11 21:59:16 -04:00
Jon Evans 5d118b0700 More visibility settings infrastructure 
ADDED: Three-state high contrast mode action
ADDED: Save contrast mode in local settings

Also some initial infrastructure for layer presets
 2020-07-11 21:59:07 -04:00
Jon Evans 0148c1db84 Support layer switch hotkeys while routing 
Fixes https://gitlab.com/kicad/code/kicad/-/issues/4699
 2020-07-03 19:49:19 -04:00
Jon Evans 3d7610d6b9 Hide PNS debug graphics behind an AC key 
Fixes https://gitlab.com/kicad/code/kicad/-/issues/4061
 2020-07-03 19:33:36 -04:00
Jon Evans c0aa6965de Migrate PcbNew project settings to new framework 
Various architecture upgrades to support this.
Creating a BOARD now requires a valid PROJECT, which caused
some (mostly transparent) changes to the Python API internals.

ADDED: Project local settings file
CHANGED: Board design settings are no longer stored in PCB file
CHANGED: Net classes are no longer stored in PCB file
CHANGED: Importing board settings now reads boards, not just projects

Fixes https://gitlab.com/kicad/code/kicad/-/issues/2578
Fixes https://gitlab.com/kicad/code/kicad/-/issues/4070
 2020-07-02 22:08:54 -04:00
Jeff Young 2cfd6ba978 Fix a couple of integer overflows. 2020-07-02 22:52:37 +01:00
Jeff Young eb1ff80d57 SHAPE collision fixes. 
1) An actual distance of 0 is still a collision, even if the allowed
distance is 0.
2) Be consitent about edges and interiors.  Everyone expect the edge
of a RECT to be part of the RECT; same with a CIRCLE.  SHAPE_POLY_SET
shouldn't be any different.  (And SHAPE_LINE_CHAIN was a split-
personality with the edge considered part of it for Collide() but not
for PointInside()).
 2020-07-02 21:38:37 +01:00
Jeff Young 441dfa30f0 Return individual custom pad shapes instead of a SHAPE_POLY_SET. 
Also implements an optional pointer to return the actual distance
from all the SHAPE collision routines.

Fixes https://gitlab.com/kicad/code/kicad/issues/4774
 2020-07-02 17:09:15 +01:00
Ian McInerney 17adb6c3c6 Add context menu to route and zone toolbar items 
ADDED: Context menu for route and zone toolbar items
 2020-06-26 21:29:03 +00:00
Jeff Young d01b29ab37 Cleanup pad geometry handling. 
There were a lot of plotters, exporters, etc. that were rolling their
own implementations.

This also introduces a lazily-built set of SHAPE objects for doing
collision detection and some forms of rendering (and later DRC).
 2020-06-22 22:28:37 +01:00
Jeff Young aeed8e6e2c Finish implementation of DRAWSEGMENT::C_RECT. 
It's currently only supported in the Footprint Editor.  It could be
easily added to the board editor (all the code is there), but the board
editor is a little short on room in the drawing tools toolbar.
 2020-06-15 20:51:31 +01:00
Jeff Young 47ab7c78a6 Divorce GRID_HELPER from the parent frame. 
This moves GRID_HELPER fully into the tool framework.
 2020-06-13 22:44:16 +01:00
Seth Hillbrand a8ab668122 Move SHAPE_ARC to start->mid->end format 
The arc shapes need to connect with their adjacent points.  By storing
the relevant points, we allow exact point matching on both ends of the
arc as well as localize point storage.
 2020-06-13 11:23:14 -07:00
Seth Hillbrand 1c46bf1955 PNS: Use segment shape for all oval pads 
Instead of calculating a simple polygon for the oval pads that are
rotated, we use a rotated segment.

Fixes https://gitlab.com/kicad/code/kicad/issues/4604

(cherry picked from commit 25b8da8e3b)
 2020-06-04 20:29:25 -07:00
Seth Hillbrand 674226f99f pcbnew: Set flag when cancelling during routing 
Fixes https://gitlab.com/kicad/code/kicad/issues/4475
 2020-06-04 15:48:01 -07:00
Jon Evans c7daf8a8f3 ADDED: Cross-probe highlighting of bus members 
Note: this is a basic implementation but it could be
improved once we include bus information in the netlist
and pcbnew can natively keep track of buses and nets
instead of just nets.

Fixes https://gitlab.com/kicad/code/kicad/-/issues/4158
 2020-05-24 13:30:23 -04:00
Ian McInerney 6692935808 Consolidate common viewer actions across cvpcb and pcbnew frames 
* Consolidate the measure tool into one tool (this gives cvpcb
  unit changing and snapping capabilities in its measure tool)
* Transition cvpcb to use actions for the sketch modes
* Replumb how magnetic items settings are stored and used
 2020-05-24 11:58:33 +01:00
Jeff Young 05855a5a1c Performance enhancements for DRC. 2020-05-18 13:38:17 +01:00
Jeff Young 3c3984a6fc Generalize default footprint fields. 
Fixes https://gitlab.com/kicad/code/kicad/issues/2289
 2020-05-08 23:30:33 +01:00
Jon Evans 51eac3e3e6 Split pcbnew and footprint editor settings getters for clarity 2020-05-05 21:46:00 -04:00
jean-pierre charras 83cb9c0d14 Fix a few Coverity and compil minor warnings. Remove dead code 2020-04-21 12:47:48 +02:00
Michael Kavanagh 7db355e34a ADDED: TOOL_ACTION for switching PNS router mode. 
Fixes https://gitlab.com/kicad/code/kicad/issues/2249
 2020-04-19 22:44:05 +00:00
Jeff Young 9c8941e040 Remove a bunch of globals. 2020-04-16 17:34:46 +01:00
Tomasz Wlostowski 4a3cd77416 router: smarter way to check the shove direction without using silly heuristics 2020-04-15 13:00:48 +02:00
Jeff Young 6e800bddae Rationalize penWidth processing as first step in removing some globals. 2020-04-13 20:58:13 +01:00
jean-pierre charras bdada70ee7 Cosmetic enhancements: add bitmaps to a few context menus. 
Fix also a minor compil warning.
 2020-04-12 10:29:28 +02:00
jean-pierre charras ffe0b4aba1 Fix a few Coverity warnings. 2020-04-02 14:21:09 +02:00
jean-pierre charras ddb7b2b2b7 pns router: fix possible hang when using "end" key to finish the current track. 
Add also left double click (same as "end" key) to finish the track.

Fixes #4116
https://gitlab.com/kicad/code/kicad/issues/4116
 2020-04-02 14:21:09 +02:00
jean-pierre charras e811101567 fix a few Coverity warnings. 2020-04-01 09:34:44 +02:00
jean-pierre charras 6e47f147aa A few Coverity fixes. 2020-03-30 09:50:26 +02:00
jean-pierre charras 9d2712a824 Fix a few Coverity warnings. 
It also fix:

Fixes #4082
https://gitlab.com/kicad/code/kicad/issues/4082
 2020-03-29 18:42:24 +02:00
Seth Hillbrand 4dfe630b28 PNS: Moving the rest of the placer to Fix/Commit 
Springback introduced a new PNS structure to check for valid placement
as well as separating the Fix/Commit routines.  This updates the
remaining placers to utilize the new structure.

Fixes https://gitlab.com/kicad/code/kicad/issues/4008
 2020-03-06 09:56:44 -08:00
Seth Hillbrand f6317fba82 PNS: Protect drag from null deref 
Items that do not have nets will not be in the index, so we need to
avoid the null pointer when adding drag tagets

Fixes https://gitlab.com/kicad/code/kicad/issues/4009
 2020-03-06 09:32:04 -08:00
Seth Hillbrand 0417a6b409 PNS: Fix missing via on zero-length 
The current node needs to be kept for zero-length lines when placing a
via.

Fixes https://gitlab.com/kicad/code/kicad/issues/4005
 2020-03-05 15:02:40 -08:00
Seth Hillbrand b0d9838fb4 PNS: Correct assertion when dragging 
Dragging using highlight caused an assertion as the duplicated lines
were being re-added with their old links still inplace.  While this was
probably fine as the link references shouldn't be stale, we clear them
to allow for the possibibility that the dragger will adjust the links in
the future.
 2020-03-05 08:47:06 -08:00
Seth Hillbrand 4c2626f6b0 PNS: Don't use PNS margin to calc bump direction 
The bump direction should only be concerned with physical points to
calculate the heuristic for loop-back otherwise we get too many false
positives.

Fixes https://gitlab.com/kicad/code/kicad/issues/3971
 2020-03-04 19:22:57 -06:00
Seth Hillbrand fe8524b9bb Update DIFF_PAIR_PLACER to new callbacks 
Needs to handle changes to PNS_ROUTER.  This does not implement
springback or backspace in DIFF_PAIR_PLACER, only allows committing
lines as before

Fixes https://gitlab.com/kicad/code/kicad/issues/3988
 2020-03-04 17:23:04 -06:00
Seth Hillbrand d4cbc348de PNS: avoid committing route with nothing 
The node is not neccesarily populated when committing, so we need to
check for validity first.

Fixes #3984 | https://gitlab.com/kicad/code/kicad/issues/3984
 2020-03-03 14:02:32 -08:00
Seth Hillbrand 9769e1020b PNS: Don't link unroutable items 
The joint map only works for items that are routable, so don't bother
adding unroutable items as this only takes additional time to process

Fixes #3976 | https://gitlab.com/kicad/code/kicad/issues/3976
 2020-03-03 12:42:56 -08:00
Seth Hillbrand d6706c257c PNS: clear via when fixing route 
When fixing the route, we need to clear the via to avoid re-placing it
on each future click.

Fixes #3966 | https://gitlab.com/kicad/code/kicad/issues/3966
 2020-03-02 16:22:34 -08:00
Seth Hillbrand 386147628e PNS: Initialize placement test 2020-03-02 16:22:34 -08:00
Seth Hillbrand 3c19704349 PNS: Don't add null items to drag 
Not all footprint pad items are connected to elements in the PNS, so if
we don't find the parent element, we avoid later crashes/assertions by
skipping their addition

Fixes #3972 | https://gitlab.com/kicad/code/kicad/issues/3972
 2020-03-02 11:28:14 -08:00
Seth Hillbrand 18db471967 PNS: Line placer returns false when nothing committed 
The true/false return should be triggered on whether any elements have
been commited to the line

Fixes #3969 | https://gitlab.com/kicad/code/kicad/issues/3969
 2020-03-02 11:11:13 -08:00
Tomasz Wlostowski a28f58d14d router: fix regression in PNS_KICAD_IFACE treating newly created items as invisible (side effect = non-45 degree angles due to incorrect snapping) 2020-02-29 20:41:31 +01:00
Tomasz Wlostowski 6850067182 router: commit traces made in single stroke/click (fixes regression introduced with Backspace support) 2020-02-29 20:40:19 +01:00
Tomasz Wlostowski e5fff302a3 router: fix arc drawing in ROUTER_PREVIEW_ITEM 2020-02-28 23:52:33 +01:00
Tomasz Wlostowski e0bad936bf router: enable inline dragging of components 2020-02-28 23:17:15 +01:00
Tomasz Wlostowski 44905e1b0a router: initial support for dragging components with traces attached 2020-02-28 23:17:15 +01:00
Tomasz Wlostowski b2b1edbcd1 router: KICAD_IFACE can now commit changes to module positions 2020-02-28 23:17:15 +01:00
Tomasz Wlostowski b6e059f018 router: use a common base class for all dragging algorithms 2020-02-28 23:17:15 +01:00
Tomasz Wlostowski 1d0ee66187 router: kill debug printf() 2020-02-28 23:17:15 +01:00
Tomasz Wlostowski 77478014d8 router: kill some warnings in OPTIMIZER 2020-02-28 23:17:15 +01:00
Tomasz Wlostowski 796aec6e6e router: SOLID::SetPos() should update the shape position too 2020-02-28 23:17:15 +01:00
Tomasz Wlostowski 5a16fda11a router: allow modification of SOLIDs in PNS::NODE 2020-02-28 23:17:15 +01:00