49c48e2fe0
Consistently handle env/prj variables
...
User-defined variables cannot be used for internally-reserved variables
Fixes https://gitlab.com/kicad/code/kicad/issues/11232
(cherry picked from commit c23679d9bd
2022-03-31 17:05:53 -07:00
1a9ef4bd0f
Add support for using a SpaceMouse to pan & zoom in the schematic editor.
2022-03-31 19:03:41 +00:00
bb43a3926a
Math and I don't get along. So just be pedantic about text rotation.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11247
2022-03-30 19:54:18 +01:00
c0d8657d97
Plot on all layers prep work.
...
We only need one bottom to top layer sequence definition.
Plot a sequence of layer IDs (LSEQ) in the order of the sequence.
Add helper method to layer set (LSET) to create a sequence of layer IDs
using another sequence for ordering.
2022-03-29 16:08:23 -04:00
b78a260326
Only write Allow DRC Violations if enabled.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11177
2022-03-29 19:31:02 +01:00
a54bbfe12b
Honour prime-event-location when starting router.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11239
2022-03-29 13:44:40 +01:00
a35ae8cdce
Don't re-fetch selection when running select-in-same-sheet.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11110
2022-03-28 21:54:24 +01:00
e51ab86225
Schematic Drag: fixes and improvements
...
Fixes:
* Various special cases around junctions on pins and dragging.
* Some rotations of endpoints resulting in a 45 degree rotate.
* Some cases where it was possible to get a line with neither
endpoint selected, and also substractive unselecting only one of two
selected endpoints unselecting both.
* Use line midpoint for sorting. Start and endpoints aren't
consistent in the order they appear on the X or Y axis. So,
we need to use the midpoint for our position for consistent
sorting when dragging groups of parallel lines where some
have the start and end reversed.
Other:
* Rename TEMP_SELECTED TO SELECTED_BY_DRAG. This is the actual meaning
of the flag, and should reduce confusion as
to when it should be used.
* Move usage of TEMP_SELECTED as an algorithmic mark to CANDIDATE
instead.
* Fix mistaken clearing of START_POINT and ENDPOINT.
* Move endpoint setting and clearing out of narrowSelection, and into
selectPoint and selectMultiple.
* Don't show dangling end warnings on new lines
2022-03-28 16:02:48 -04:00
6fa8cab188
Don't default to Annotate All just because the selection is empty.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11181
2022-03-28 17:52:50 +01:00
a2d4351b97
Correct initialization of justification.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11248
2022-03-28 17:11:20 +01:00
343b2681d4
Midpoints for eeschema rectangles and text boxes.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10362
2022-03-28 11:16:39 +01:00
9a342458fa
Fix a few Coverity and compil warnings.
2022-03-26 16:21:23 +01:00
150859c973
Try Coverity fixes that don't break unit tests.
2022-03-25 16:49:29 -04:00
7da7864f5e
Fix some Coverity issues.
2022-03-25 15:51:05 -04:00
7b2d9dfc0c
Fix some Coverity uninitialized scalar variable issues.
2022-03-24 13:17:07 -04:00
a6606924f1
GERBER_JOBFILE_WRITER: fix a crash due to use of a null pointer.
...
Can happens when it is created from a Python script.
Fixes #11227
https://gitlab.com/kicad/code/kicad/issues/11227
2022-03-24 17:54:05 +01:00
92a229eec7
ADDED separate user-defined color for page limits.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/5271
2022-03-24 14:11:41 +00:00
1d66925f5f
Enable bb and/or uvias when encountering them on Altium import.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10044
2022-03-22 22:33:51 +00:00
482dbcec54
All triangular trapezoid pads
...
A triangular trapezoid will have the deltaX/deltaY of the same size as
the length of that axis. This creates a three-point polygon, which is
perfectly valid for our use
(cherry picked from commit 4e98ce87c7
2022-03-22 13:39:55 -07:00
118a37f19f
Fix issues with importing NPTH pads from CircuitStudio.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10493
2022-03-22 18:08:05 +00:00
3271b43d4b
Formatting.
2022-03-22 18:08:05 +00:00
b679a21651
Zero out parent rule when overridden by local property.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11197
2022-03-21 20:49:35 +00:00
b3ae0fdca5
A little bit of nullptr safety.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11077
2022-03-21 20:07:33 +00:00
cf611f1742
Better safety around layersets.
2022-03-21 18:19:00 +00:00
40e0c8257d
Rotate textbox shape along with text.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11187
2022-03-21 18:19:00 +00:00
41c2a48802
Prevent crash on unplated holes
...
NPTH may not be flashed on any layer, so the set-layer-visible logic
shouldn't try to determine their layer for showing.
Fixes https://gitlab.com/kicad/code/kicad/issues/11193
2022-03-21 10:39:33 -07:00
d27d2e0ad9
Pcbnew: fix lost of focus after clicking on a wxChoice in toolbar.
...
After changing track width, via size, grid or zoom from the toolbar, the
canvas has no longer the focus on Windows. So we force the focus after clicking
on these widgets.
Fixes #11103
https://gitlab.com/kicad/code/kicad/issues/11103
2022-03-21 18:10:07 +01:00
4f62960334
Update message panel from PCB point editor and SCH drawing tools.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11186
2022-03-21 10:32:36 +00:00
73f835437e
Don't modify outer loop variable inside inner loop.
2022-03-19 19:37:01 +00:00
476f1a7d4d
Preload PCBnew find with selection when appropriate.
2022-03-19 19:37:01 +00:00
6bf47e44e4
pcbnew: DIALOG_PRINT_PCBNEW: activate right click context menu inside layer list.
2022-03-19 08:10:17 +01:00
3b6e8464c2
Fix expand variables for built-in
...
Allow falling back to the alternate variable definitions if the built-in
text block variables are not set.
Also push the project into variable resolution when plotting
Fixes https://gitlab.com/kicad/code/kicad/issues/11168
(cherry picked from commit c44d31fcfb
2022-03-18 16:47:18 -07:00
b3a319b77e
Append True to Python 3 AddPrimitivePoly() call
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11012
2022-03-18 20:00:32 +00:00
5aa561abe1
Add overlapping pad test and share some tests between board & fp editor DRC.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10086
2022-03-18 19:58:42 +00:00
dc39703d0e
Bring pcbnew print dialog in line with plot.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/2171
2022-03-18 13:37:20 +00:00
54c9e36556
Python, board.i: fix incorrect order of an include.
...
The result was ignoring PCB_SHAPE in pcb_text.i.
2022-03-18 14:19:14 +01:00
c4c8848fa3
Performance enhancements for Cleanup Tracks & Vias.Performance enhancements for Cleanup Tracks & Vias.Performance enhancements for Cleanup Tracks & Vias.Performance enhancements for Cleanup Tracks & Vias.Performance enhancements for Cleanup Tracks & Vias.Performance enhancements for Cleanup Tracks & Vias.Performance enhancements for Cleanup Tracks & Vias.Performance enhancements for Cleanup Tracks & Vias.Performance enhancements for Cleanup Tracks & Vias.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11119
2022-03-18 11:04:53 +00:00
0f359c8a3b
Careful of calculated fields when comparing board FPs with library.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10143
2022-03-17 13:19:25 +00:00
442aae19d9
Separate flashing check for connectivity
...
When building the connectivity database, we should not be using the
connectivity to check for shapes.
To make this deterministic, we introduce two flags (ALWAYS_FLASH and
NEVER_FLASH) that are used with connectivity building to determine
whether a pad is flashed for connectivity or not. ZONE <-> PAD/VIA
connectivity will be checked with ALWAYS_FLASHED and all other
connectivity will be checked with NEVER_FLASHED if they are marked for
potential annular ring removal. If they are not marked for removal,
they will be checked ALWAYS_FLASHED.
Fixes https://gitlab.com/kicad/code/kicad/issues/11114
2022-03-16 17:30:01 -07:00
4225f92573
Slight improvements to via drawing.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8717
2022-03-16 14:56:32 +00:00
62f813fddc
Better error reporting for PTH pads.
2022-03-16 14:56:32 +00:00
cabcaf933c
Cleanup.
2022-03-16 14:56:32 +00:00
fa5a484797
Remove unused variable.
2022-03-16 14:56:32 +00:00
f596ae3487
Allow mechanical-clearance checks between edge_cuts and other layers.
2022-03-16 14:56:32 +00:00
567fd5ba74
Specctra import/export: fix some issues (tested only with FreeRouter):
...
- Better handling of locked tracks than commit cbb6ca85
2022-03-16 12:31:45 +01:00
600dcd31ad
Allow track board edge clearance violations inside the holes of castellated pads.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10970
2022-03-15 00:05:23 +00:00
8d682002c3
Fix previous breakage from shared_ptr going out of scope.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10970
2022-03-14 23:57:50 +00:00
cbb6ca8500
Import specctra track locking.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11070
2022-03-14 23:02:19 +00:00
a81c8d4922
Save pointer to markers provider.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11136
2022-03-14 22:13:39 +00:00
e7bf4ab8fa
Separate board-edge silk clearance from mask-edge silk clearance.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10970
2022-03-14 20:19:09 +00:00
2ec21c7720
Don't check for board edge collision on castellated pads.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10970
2022-03-14 20:19:09 +00:00
c34dc13a8e
Rework on DIALOG_CLEANUP_TRACKS_AND_VIAS: do not immediately run the cleanup engine.
...
The cleanup engine is now run on request, before options are selected.
Needed for large boards because the calculation time can be significant.
2022-03-14 18:12:44 +01:00
65185f53a1
Rotate fp zones before comparing with library versions.
...
Also includes some performance fixes to not copy around triangulation
data when it's not needed.
Fixes https://gitlab.com/kicad/code/kicad/issues/10143
2022-03-14 15:53:24 +00:00
d74a0cdaa3
Don't pre-scale the line width
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/11122
2022-03-13 23:08:28 -04:00
ced1e68ea1
A bit of wxT().
2022-03-13 16:09:06 +00:00
06c1bccccd
Exclude hidden text from selection in FP Editor.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11111
2022-03-12 23:29:01 +00:00
db0b733be5
Clear DRC caches before running soldermask tests again.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10922
2022-03-12 19:44:34 +00:00
7fb4a2c0a5
CONNECTIVITY_DATA::IsConnectedOnLayer(): fix crash in some cases.
...
Fix crash when a zone do not have filled areas on a given layer.
2022-03-12 19:31:46 +01:00
b8557e77ee
Tweak the "pyd" extension if for windows to be completely inclusive
2022-03-12 09:22:01 -05:00
0a8718cd1d
Fix issue when we ask if a pad is connected to a zone we're in the middle of filling.
2022-03-12 14:17:53 +00:00
89e61ff73b
More performance enhancements for DRC.
2022-03-12 14:17:52 +00:00
e03b06927d
Fix rotation problems for knockout fp text, and implement 3D rendering.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11086
2022-03-12 14:17:52 +00:00
f14ef477cc
Fix a incorrect filename in a copy command (MSW specific).
...
Also fix a regression and respect the KICAD_BUILD_QA_TESTS build option.
2022-03-12 11:04:57 +01:00
7ab4d67e94
Make sure line style comboboxes get a default entry.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11083
2022-03-11 23:19:16 +00:00
6f555b6258
wxT() and some cleanup in DRC.
2022-03-11 23:19:16 +00:00
eec528ae48
Fix GCC build error on Linux.
2022-03-11 17:03:01 -05:00
ae307e1b34
Parallelize DRC triangulation, keepout processing, and sliver checking.
...
Also fixes issue with adding fractured polygons in sliver checking which
slowed the board from hell down to less than a crawl.
2022-03-11 20:52:11 +00:00
6ce1399811
Redraw pads when mask or paste layer is visible after board setup.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11079
2022-03-11 20:52:11 +00:00
79aafd1bd3
altium: support keepout restrictions in Arcs, Fills and Regions
2022-03-11 19:15:58 +01:00
8d05ca5982
Teardrop rework: avoid refill zones on a not updated connectivity data.
...
- Teardrops have now just their shape filled (much faster than a full refill)
- The full zone refill is no longer made after recreating teardrops.
- this is more compatible with the option Auto-refill zones"
Fixes #11106
https://gitlab.com/kicad/code/kicad/issues/11106
2022-03-11 16:12:27 +01:00
2bf56c2441
DIALOG_GLOBAL_DELETION and teardrop.cpp: fix incorrect call to GetLayer() for ZONES
2022-03-11 11:16:09 +01:00
d452f79860
pcbnew: search for nets
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/10601
2022-03-10 23:12:30 +00:00
f218da6ea5
Help repair invalid rotation settings
...
We had a period where we were writing invalid rotations leading to
values too large by a factor of 100. This clamps the stored values
while repairing those affected
Fixes https://gitlab.com/kicad/code/kicad/issues/11090
2022-03-10 09:44:26 -08:00
eb9ccea559
Performance improvement.
2022-03-10 13:46:42 +00:00
0440aa3d83
Extend layer LAYER_LOCKED_ITEM_SHADOW to draw shadow markers on other locked items:
...
tracks, texts, graphics.
2022-03-09 18:50:31 +01:00
016af235db
Pcbnew: add a GAL layer (LAYER_LOCKED_ITEM_SHADOW) to draw markers on locked footprints
2022-03-09 17:54:58 +01:00
e37bb2e0c3
swig: disable a few warnings generated by pcb_shape.i, math.i and version.i
2022-03-09 17:29:29 +01:00
663edcf665
Better progress indication for board from hell.
2022-03-09 14:30:21 +00:00
878c70c1ab
Pcbnew: fix erroneous IslandRemovalMode default mode in board files.
...
The default is ISLAND_REMOVAL_MODE::ALWAYS in *.kicad_pcb files
2022-03-09 13:17:18 +01:00
e7f379c31d
Pcbnew, Knockout texts: fix issues seen with rotated texts.
...
Fixes #11085
https://gitlab.com/kicad/code/kicad/issues/11085
2022-03-09 11:22:05 +01:00
e4b56ab7f1
Performance fixes for the board from hell....
2022-03-08 23:54:34 +00:00
392a3ec131
Fix typo which leads to catastrophic performance on boards with tons of zones.
2022-03-08 20:16:37 +00:00
f6dac9eb13
Support text knockouts in non-copper zones.
2022-03-08 18:06:41 +00:00
40fd8860fe
Plotting (and some bug fixes) for knockout text.
2022-03-08 18:06:41 +00:00
b6aa5bd1ed
Pcbnew: PCB_TEXT: save the Locked flag in file.
...
Previously, one could lock a graphic text on a board, but the lock state was not saved.
2022-03-08 17:35:26 +01:00
bafd8ac9d5
plot_board_layers.cpp: Add missing layers (USer_x) in list
...
Fixes #11072
https://gitlab.com/kicad/code/kicad/issues/11072
2022-03-08 14:41:10 +01:00
293021c58c
ADDED: knockout pcb and fp text.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7055
2022-03-08 13:22:20 +00:00
6934bc124c
Move temp save files to temporary directory
...
Avoid excess writes to the project directory to dodge issues with remote
file systems not fully writing data.
wxRename works across disk boundaries (in theory) and falls back to
wxCopy/wxRemove when it fails
Fixes https://gitlab.com/kicad/code/kicad/issues/10747
2022-03-07 20:13:28 -08:00
bf0f2aa4a8
Adjust bitmap text spacing a bit so it's closer to the stroke font.
...
This helps the text better match the highlighting when it gets small
enough that we switch to the bitmap font for performance.
2022-03-07 20:30:50 +00:00
a9ebb42ecd
altium: Parse keepout restrictions of tracks
2022-03-07 19:58:43 +01:00
f866d15154
Pcbnew: fix crash when clicking on a footprint on a filled zone area.
2022-03-07 13:56:47 +01:00
bf44ae907b
Minor fix for dialog.
2022-03-07 10:26:18 +00:00
0dc857b5ab
Clean up pad handling in 3D viewer.
...
Most importantly, create F_Cu/B_Cu layers if they're otherwise empty
but we have plated pads to render on them.
Fixes https://gitlab.com/kicad/code/kicad/issues/10207
2022-03-06 13:57:12 +00:00
dbfdd3fb56
Fix some Coverity warnings.
2022-03-06 09:48:33 +01:00
3cb1a689a7
pcbnew: Fix Bezier "Add Primitive" in Pad Creation Dialog
2022-03-06 00:35:53 +00:00
1fc99dd2c0
Don't call GetLayer() on a multi-layer object.
2022-03-05 23:07:43 +00:00
23088e6e1a
Minor performance enhancements for zone filler.
...
Be smarter about not knocking out some classes of pads twice.
2022-03-05 20:32:08 +00:00
fed5bcbdf6
Improvements for pads/vias in zones which knockout other zones.
...
1) Drop tiny islands which might cause connection problems.
2) Cleanup some dead code in filler
3) Don't estabilish a connection to an island that is fully covered
by whatever its connecting to.
Fixes https://gitlab.com/kicad/code/kicad/issues/11036
2022-03-05 18:59:53 +00:00
878c4d2f6b
Must clear arcs before calling Clipper.
2022-03-05 18:59:53 +00:00
cb6d6d7ef4
Settings: allow multiple project access from Python standalone
...
We can't handle this in the UI, but we can externally, so allow
it for Python scripting and eventually we'll use this in the UI
also...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/10540
(cherry picked from commit 1394509734
2022-03-05 13:04:19 -05:00
69453964b4
pcbnew_scripting_helpers: fix a potential crash when running a script outside kicad.
...
BOARD* LoadBoard( wxString& aFileName, IO_MGR::PCB_FILE_T aFormat ) crashes if a
old project file (*.pro) exists and the *.kicad_pro file doses not exists.
The crash happens when trying to convert the old config outside kicad.
2022-03-05 18:26:33 +01:00
cc5493e91e
DIALOG_COPPER_ZONE_BASE: better tool tip.
2022-03-05 18:23:08 +01:00
3bb1fd8311
Teardrops: fixes and enhancements:
...
- do not allow smoothing outlines: outlines are already optimized.
- do not allow settings incompatible with teardrop area (grid, thermal relief)
- DIALOG_COPPER_ZONE: export zone settings to similar zones only.
Fixes #11040
https://gitlab.com/kicad/code/kicad/issues/11040
2022-03-05 17:18:42 +01:00
c18d9b9baf
Normalize `IsInsideCourtyard`
2022-03-04 15:49:02 -08:00
cd7141fd10
Cache read arc data for stability
...
Arcs can be altered by the process of changing from on-disk
representation to in-memory representation. Saving back to disk without
modifying the arc should not modify the calculated values.
This stores a copy of the on-disk representation that is only used to
save back to disk in the event that the arc is not modified during
editing.
Fixes https://gitlab.com/kicad/code/kicad/issues/10442
2022-03-04 15:20:31 -08:00
8218f9ab44
Finally found the intermittant QA crash
...
When loading footprints/zones in parallel, we cannot reference a static
vector that gets cleared by other threads.
It is unclear why this element was ever static to begin with (premature
optimization?) but it has been this way for a long time. We never
noticed until we threaded load cycles, which gave the hatch a chance to
override itself and cause crashes
Fixes https://gitlab.com/kicad/code/kicad/issues/9888
2022-03-04 11:37:49 -08:00
006e1be69c
ZONE: display number of vertices on the info panel (regression fix)
...
This is a useful info because the calculation time depend on this number.
2022-03-04 10:42:32 +01:00
e7673f7198
Remove unneeded condition to rotate
...
The condition that the board must have elements on it before allowing
the rotate command is invalid as we allow rotating new elements before
placement
Fixes https://gitlab.com/kicad/code/kicad/issues/10581
(cherry picked from commit c1dcfdffb1
2022-03-03 16:04:22 -08:00
b5c2f0d39a
Remove the open array in favor of std containers
...
The containers allow iteration, size knowledge and lower bug surface
2022-03-03 16:03:26 -08:00
2d1fa48a73
Improve solder paste tooltips.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10585
2022-03-03 23:08:36 +00:00
c4b6801f3a
Improve some strings and measurements.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10482
2022-03-03 22:40:18 +00:00
ec5b7a57ec
Consistency in via dimensions terminology.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11024
2022-03-03 22:40:18 +00:00
9d927f3135
Check for additional connections between tracks
...
Prevents removal when a track is connected not just to other tracks but
also other connected items
Fixes https://gitlab.com/kicad/code/kicad/issues/10916
2022-03-03 12:07:20 -08:00
27db23eba0
FP_TEXT::ViewGetLOD() fix incorrect test (LAYER_MOD_VALUES color has no matter)
...
Fixes #11026
https://gitlab.com/kicad/code/kicad/issues/11026
Fixes #11028
2022-03-03 11:57:19 +01:00
adace996f4
qa/pns: refactored the P&S debug tool:
...
- factored out 'business' code from the UI code
- moved to the new DEBUG_DECORATOR interface
- UI-less log file and log player classes as a step towards P&S unit tests
2022-03-03 01:02:00 +01:00
45f7cf9571
router: rework the DEBUG_DECORATOR a bit:
...
- support for dumping complete PNS::ITEMs and generic SHAPEs
- support for log nesting levels
- wxT-ized strings
- more verbose output where needed
2022-03-03 01:02:00 +01:00
b6fc96c1d5
pcbnew: check for null SETTINGS in RATSNEST_VIEW_ITEM (prevents crash in the P&S debug tool)
2022-03-03 01:02:00 +01:00
2fafa55647
Maintain width of converted tracks
2022-03-02 10:45:53 -08:00
7e836ae27a
Select the copper layer before processing
...
If we are converting to tracks, the copper layer needs to be selected
before any other elements are processed, otherwise, we end up with the
default undefined layer
Fixes https://gitlab.com/kicad/code/kicad/issues/11025
(cherry picked from commit 9396735733
2022-03-02 10:41:44 -08:00
513486b0ec
Overhaul show no-net indicators logic.
...
It doesn't appear that it was ever finished the first time around.
Fixes https://gitlab.com/kicad/code/kicad/issues/11020
2022-03-02 18:28:39 +00:00
6b806bbe9c
Make sure Cleanup handles shapes other than segments.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10955
2022-03-02 18:28:39 +00:00
4d6c2e4868
Update end item before moving on track/via change
...
The move even dereferences m_enditem for logging and perhaps other
actions. We need to ensure that the end item has not been invalidated
before taking this action
Fixes https://gitlab.com/kicad/code/kicad/issues/10732
(cherry picked from commit 901c330478
2022-03-02 09:23:15 -08:00
495b42c39f
Fix logic error. Footprint is sometimes the item and sometimes its parent.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10949
2022-03-01 21:18:01 +00:00
298940e3d3
Switch zone auto-fill default to false.
2022-03-01 19:27:00 +00:00
0677ef6510
Default isolated copper DRC violation to a warning.
2022-03-01 19:21:09 +00:00
1966972fc1
Retire no-pads warning in favour of defaulting to area-based remove islands strategy.
2022-03-01 19:19:18 +00:00
c4143b0ff6
Reconcile two different printing bug fixes.
...
a9f092b3706f5cb1f97dhttps://gitlab.com/kicad/code/kicad/issues/11004
2022-03-01 17:28:37 +00:00
bbfbfc2cd2
High-contrast mode: don't render vias that don't cross high-contrast layer.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8740
2022-03-01 16:00:28 +00:00
843a56c4e4
Implement two-staged zone priority: assigned priority followed by UUID.
2022-03-01 14:53:35 +00:00
914e706023
Replace zone-with-no-pads test with isolated copper test.
...
The later is far more discriminating.
Fixes https://gitlab.com/kicad/code/kicad/issues/11009
2022-03-01 12:02:17 +00:00
661488e932
Be more cognizant of multi-layer items.
2022-03-01 12:02:17 +00:00
a4a3f6ff74
Fix zone/connectivity deadlock.
2022-03-01 12:02:17 +00:00
fab78af176
Remove TEDIT
...
This marker is not used in KiCad and creates merge conflicts when two
different users edit the same file
2022-03-01 00:25:44 +00:00
58b8d63ff8
Draw boundary based on first zone layer.
2022-02-28 21:40:36 +00:00
69a6033905
Hysteresis for track netnames.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10416
2022-02-28 21:11:01 +00:00
aa0787f2b4
Gerber plotter: fix broken plot of SHAPE_LINE_CHAIN with arcs.
...
Also simplify SHAPE_T::POLY plot.
Fixes #10989
https://gitlab.com/kicad/code/kicad/issues/10989
2022-02-28 18:10:16 +01:00
1f16092e29
Infobar warning if symbol loading was cancelled.
...
Also makes sure the progress dialog is closed when we're done reading
symbols (it used to stay up for much of the symbol editor initialization).
Also makes sure that any cancel in the preLoad step is honoured in the
sync step. (The preload is done because it is multi-threaded and therefore
faster than the single-threaded sync.)
Also makes sure that individual threads pay attention to the cancellation,
not just the GUI thread.
Fixes https://gitlab.com/kicad/code/kicad/issues/8372
2022-02-27 17:06:08 +00:00
d299ddbc7e
Cleanup.
2022-02-27 12:05:39 +00:00
8de4f762e1
svg importer: fix a crash when importing some files with no graphic item
2022-02-27 09:59:42 +01:00
a178de8744
FP editor: fix crash when trying to export a footprint to the board editor.
2022-02-27 08:38:19 +01:00
ae85f57577
Drop a knee between tracks to a single item when dragging.
...
This prevents the disambiguation menu from coming up when we don't
really care which element we start the drag on.
Fixes https://gitlab.com/kicad/code/kicad/issues/10745
2022-02-26 22:54:23 +00:00
2c6a2c3479
Repair tab order in Footprint Properties dialog.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10978
2022-02-26 16:41:22 +00:00
e61c48fbf2
DIALOG_BOARD_STATISTICS: Reset the drill count list before recalculations.
...
Fixes #10984
https://gitlab.com/kicad/code/kicad/issues/10984
2022-02-26 17:03:48 +01:00
89c14f01f7
Repair algorithm to avoid slow movement issue.
...
This goes back to the previous code for this one part.
Fixes https://gitlab.com/kicad/code/kicad/issues/10976
2022-02-26 15:58:44 +00:00
0e00ca31ea
APPEARANCE_CONTROLS: fix missing update when toggling a layer view.
...
Fixes #10977
https://gitlab.com/kicad/code/kicad/issues/10977
2022-02-26 10:36:57 +01:00
c9746fb34b
Handle list double-click without shortcuts
...
The LIST_DCLICK event can be fired by spacebar or enter in GTK. This
conflicts with using the spacebar to reset local coordinates. Instead,
we capture the double-click event manually to add the footprint to the
board
Fixes https://gitlab.com/kicad/code/kicad/issues/5714
Fixes https://gitlab.com/kicad/code/kicad/issues/10633
(cherry picked from commit ff6f398607
2022-02-25 16:53:27 -08:00
535ea800c0
Honor modifier keys in diambiguation
...
Needs to be reset for the new action before selecting elements at a
point.
Fixes https://gitlab.com/kicad/code/kicad/issues/9712
(cherry picked from commit a30ad0b54a
2022-02-25 16:16:15 -08:00
78620347c8
Fixing Eagle refs that do not work with KiCad
...
KiCad has stricter requirements for what consititutes an annotated
symbol. This checks for and corrects annotations that begin with '#',
do not begin with a non-numeric character or do not end with a number
2022-02-25 23:42:47 +00:00
714c65275c
Initial focus for Get and Place Footprint.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10230
2022-02-25 21:54:38 +00:00
283aaff2df
Use board polygon instead of bbox for size
...
Board BBox uses the visible size of the board, which includes edge cut
thickness. This is not appropriate for the Board characteristics.
Using the outline polygon gives accurate results and falls back to a
bounding box in the case where the outline is invalid
Fixes https://gitlab.com/kicad/code/kicad/issues/10972
(cherry picked from commit 54f621c570
2022-02-25 11:14:54 -08:00
a7b8a1446b
fix minor compil warnings.
2022-02-25 14:26:37 +01:00
bc51c89c90
Reconcile zone-auto-fill with undo.
2022-02-25 13:05:49 +00:00
77f1aad77e
Fix incorrect conversion from lines to rect in fp editor.
...
Fixes #10965
https://gitlab.com/kicad/code/kicad/issues/10965
2022-02-25 12:41:57 +01:00
3ac121620d
Handle negative arc angles
...
Plotter expects the arc angles to be positive, so check and flip before
plotting if we have track arcs that might be negative angles
Fixes https://gitlab.com/kicad/code/kicad/issues/10968
2022-02-24 17:27:08 -08:00
5c54f40eae
Layer visibilities aren't stored in project for footprint editor.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10953
2022-02-25 00:08:49 +00:00
639fdb915a
Implement real layer test for visibility.
2022-02-24 21:32:43 +00:00
d65f9ad2d8
Implement multi-layer stitching via logic.
2022-02-24 21:32:43 +00:00
369f53bb19
Better DRC checking when placing vias.
2022-02-24 21:32:43 +00:00
b7be42375d
Add an infobar warning when trying to fill a zone which is not connected.
2022-02-24 21:32:43 +00:00
c924b0155e
DIALOG_GLOBAL_EDIT_TRACKS_AND_VIAS: fix a wx alert.
2022-02-24 19:33:29 +01:00
429c311ec3
action_plugin: Remove duplicated entry in UndoList
2022-02-24 18:31:16 +00:00
d465eb6425
ADDED: automatic zone refilling.
...
This is for the out-of-box experience for novice users. It is presumed
that folks with larger more complicated boards will turn it off.
Fixes https://gitlab.com/kicad/code/kicad/issues/6413
2022-02-24 18:16:45 +00:00
f076d07e9e
Fix asserts.
2022-02-24 18:16:45 +00:00
8ef4ef8d96
fp texts are not upright when footprint rot is not n*90deg
...
Fixes #10882
https://gitlab.com/kicad/code/kicad/issues/10882
2022-02-24 09:08:09 +01:00
d2069e1548
Copy Pad_Master when copying BOARD_DESIGN_SETTINGS.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10932
2022-02-23 18:11:27 +00:00
cb16ad7557
Debounce layer visibility buttons and fix issues with FP Editor.
2022-02-23 17:52:08 +00:00
a36bc27e6d
Fix a couple of asserts.
2022-02-23 17:38:51 +00:00
08df5c0b01
Handle hidden layers in FP Editor.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10946
2022-02-23 15:31:07 +00:00
6e35406015
Fix copy/pasta.
2022-02-23 12:21:07 +00:00
41f6e634c6
Partially integrate grid snapping with constraints.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10941
2022-02-22 22:19:55 +00:00
6d5d6d7302
PCB_EDIT_FRAME: do not forget to pass wxIdleEvent to other clients.
2022-02-22 19:51:32 +01:00
e6c617b74d
Respect ERROR_OUTSIDE when inflating polygons.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10896
2022-02-21 15:19:46 +00:00
79c7859052
Apply a19d9105f0 to zone case as well.
...
Also improves on the previous comments.
Fixes https://gitlab.com/kicad/code/kicad/issues/10922
2022-02-21 13:48:34 +00:00
d9d23dd06b
Commenting.
2022-02-21 12:26:59 +00:00
5544dd8018
Don't call GetLayer() on a multi-layer object.
2022-02-21 00:08:43 +00:00
aa2c8e9b0c
A more discerning un-flashed-connectivity test.
2022-02-20 23:49:02 +00:00
78ae3d286a
Fix merge damage.
2022-02-20 21:25:50 +00:00
fad4c135fa
Use only a physical connection to determine flashing of pads.
...
Checking for proper nets just confuses things when the nets are set
wrongly for some reason. This way we generate clearer DRC errors.
Fixes https://gitlab.com/kicad/code/kicad/issues/10645
2022-02-20 20:54:56 +00:00
866fade4ab
Remove unnecessary validations.
...
Not sure if this will fix the bug or not as I can't reproduce it, but
I'd say odds are pretty good.
Fixes https://gitlab.com/kicad/code/kicad/issues/10467
2022-02-20 20:54:47 +00:00
52a2d52bf0
altium: Parse solder and paste mask settings of tracks and arcs
2022-02-20 20:18:40 +01:00
5efd29d6f4
Optimize DIALOG_GLOBAL_EDIT_TRACKS_AND_VIAS: a time consuming call (OnModify())
...
was made for each item change.
It is now made only once.
Fixes #10905
https://gitlab.com/kicad/code/kicad/issues/10905
2022-02-20 20:07:33 +01:00
df3291c59d
Fix nullptr error (no router tool in footprint editor).
2022-02-20 16:56:53 +00:00
f18aae679c
Use router to update message panel when routing.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10068
2022-02-20 16:50:30 +00:00
d2cf68bcdd
Plotters: add plot Arcs using EDA_SHAPE or center, start point and end point.
...
It avoid trying to calculate arc angles (start, end or arc angle) that
frequently create issues due to reverse Y axis, plot mirrored and/or
angle normalization with different criteria.
Fixes #10914
https://gitlab.com/kicad/code/kicad/issues/10914
2022-02-20 17:17:20 +01:00
85805b95ba
Cancel or commit pad edit mode when switching footprints.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10209
2022-02-19 19:36:19 +00:00
8ef7252330
altium: Don't use string concatenation for paths pointing in the compound file
...
* std::vector do not need to be split apart again
* supports backslash in footprint names
2022-02-19 16:46:20 +01:00
6ce63d66e8
On-the-fly language updating for appearance panel & selection filter.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10040
2022-02-19 14:59:51 +00:00
86988225c3
Exclude some fab attrs from library parity check.
...
Also excludes zone outline hatching, which is just a visualization
property.
Fixes https://gitlab.com/kicad/code/kicad/issues/10903
2022-02-19 14:59:50 +00:00
86c025eb30
altium: Fix parsing of zones which use the KEEP_OUT_LAYER
2022-02-19 14:37:05 +01:00
b184b43431
PCB_DIM_ALIGNED and DIALOG_DIMENSION_PROPERTIES: fix bad text rotation.
...
Fixes #10901
https://gitlab.com/kicad/code/kicad/issues/10901
2022-02-19 10:24:44 +01:00
a19d9105f0
Fix SolderBridge check to only check across multiple
...
We should not generate an error when overlapping a single copper element
with a soldermask that is not associated with copper.
Fixes https://gitlab.com/kicad/code/kicad/issues/10906
2022-02-18 11:47:28 -08:00
f0e4448a9d
Remove broken call to normalize outlines
...
We should never be editing the user's outlines for them. This creates
broken zones that are hard to repair. In this case, there was also a
secondary zone with no outline that would crash the system
Fixes https://gitlab.com/kicad/code/kicad/issues/10904
(cherry picked from commit f0d7a09af9
2022-02-18 09:31:52 -08:00
7de0159e0e
pcbnew: fix incorrect calculation of the board thickness from board stackup.
...
dielectric sub layers were not taken in account.
Fixes #10899
https://gitlab.com/kicad/code/kicad/issues/10899
2022-02-18 18:09:16 +01:00
6f6cf995ba
Don't ask for layer of multi-layer item.
2022-02-18 14:53:10 +00:00
1ee3ce45e8
Don't ask for layer of multi-layer objects.
2022-02-18 14:19:13 +00:00
89907a18ce
Don't ask for layer of multi-layer object.
2022-02-18 13:30:40 +00:00
ce0233577b
Don't try to fetch layer of multi-layer objects.
2022-02-18 13:20:36 +00:00
81bed9ab96
Add zone margin when subtracting other graphics and zones.
...
It was already added for pads and tracks, but not the other objects.
Fixes https://gitlab.com/kicad/code/kicad/issues/10896
2022-02-18 13:20:36 +00:00
e09ecd8380
Don't ask for layer of multi-layer objects.
2022-02-18 13:20:36 +00:00
2fddc9daf3
Pcbnew: fix missing connectivity update when adding an item.
...
Skipping connectivity update when adding an item is possible only when loading a file
Fixes #10879
https://gitlab.com/kicad/code/kicad/issues/10879
2022-02-18 13:24:14 +01:00
8ee81e0fc4
Fix plotting of PCB arcs.
2022-02-18 12:14:38 +00:00
5efa354f0f
Add asserts to flush out incorrect uses of GetLayer().
2022-02-18 12:14:38 +00:00
3a29d94c0a
Prevent merging tracks across pads
...
When merging co-linear tracks, we should maintain the existing break if
it exists on pads, vias and other connection points
2022-02-17 19:43:04 -08:00
8f670552a6
Allow Rule Areas on all physical layers.
...
Required to do things like modify silk_clearance rules.
2022-02-17 23:59:09 +00:00
4966e2ebc2
Fix collapsing name column in Net Inspector.
2022-02-17 23:59:09 +00:00
bc24002be7
Don't print clearance lines.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10883
2022-02-17 23:59:09 +00:00
cf88b9aaec
Maintain connectivity while cleaning tracks/vias
...
When merging segments that loop back on each other, we need to merge
them in such a way to to keep the resulting endpoints connected to the
original adjoining endpoints
Fixes https://gitlab.com/kicad/code/kicad/issues/10780
(cherry picked from commit 8e9d44942f
2022-02-17 15:24:54 -08:00
8d19b52aed
Line stroking for 3D view.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10887
2022-02-17 18:02:56 +00:00
b53b68c686
Fix double loading plugins and sys.path entires multiplying
2022-02-17 17:41:52 +00:00
e140298878
GERBER_JOBFILE_WRITER: allows all *_User layers to be listed in *gbrjob file.
2022-02-17 15:22:18 +01:00
662fb40605
Slightly cleaner impl.
2022-02-17 12:48:29 +00:00
529d598c36
GERBER_JOBFILE_WRITER: fix missing handling of User_1 to User_9 user layers.
...
Fixes #10878
https://gitlab.com/kicad/code/kicad/issues/10878
2022-02-17 11:41:23 +01:00
5a9fb08778
zone_filler_tool: fix crash due to a null pointer use in zone filler.
...
Fixes #10875
https://gitlab.com/kicad/code/kicad/issues/10875
2022-02-17 09:21:14 +01:00
a041492736
SWIG mappings for all shapes
2022-02-16 20:58:52 +00:00
b1bd8421e0
Performance: remove associated triangle sets when removing outline.
...
This saves us having to re-triangulate at the end of zone filling.
2022-02-16 17:00:54 +00:00
327ddad79f
Performance: get rid of rawPolys / finalPolys distinction.
...
(The final fractured polys are required, and we don't really ever use
the raw polys anyway, so they were removed.)
2022-02-16 15:33:12 +00:00
08383e923c
Formatting.
2022-02-16 14:18:25 +00:00
ca095896cb
Performance: multi-thread CN_ZONE_LAYER RTree generation.
2022-02-16 14:11:09 +00:00
3b292a4941
Cleanup and code clarity.
2022-02-16 12:00:18 +00:00
7ddd3137a3
While flags are in prefs, actual clearance values are in board setup.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10852
2022-02-15 22:15:53 +00:00
fc5772ad92
altium: Extend test-suite to support FP_ZONE validation
2022-02-15 21:42:03 +01:00
72a389e612
Performance: check line ends first before doing collision.
2022-02-15 19:19:03 +00:00
2172810600
Performance: better sharing of zone fills.
2022-02-15 19:19:03 +00:00
d8c4f2cb09
Performance improvements for zone filler.
2022-02-15 19:19:02 +00:00
8e26946567
Don't shrink progress reporter when message changes; only grow.
2022-02-15 19:19:02 +00:00
9fae9e8afc
Fix sizing of the two last columns in drill statistics table
2022-02-15 17:19:11 +01:00
5c9e718407
Performance enhancements for connectivity.
...
1) Generate SHAPE_POLY_SET triangulation by outline so they can be
shared between connectivity system and other clients.
2) Don't add items to connectivity when reading board; we're going
to do a total rebuild anyway.
3) Use multithreading when caching triangulation.
2022-02-15 12:20:34 +00:00
98b9c6e2a1
Better progress reporting and a slight performance boost on commit.
2022-02-15 12:20:34 +00:00
d2de114d21
More performance optimizations.
2022-02-15 12:20:34 +00:00
7632c0cf6f
Fix board statistics drill grid column sizing
...
And remove the horizontal scrollbar.
2022-02-15 01:40:53 +01:00
a455dd8815
Fix issue for stand alone python scripts, when running without project.
2022-02-14 18:58:55 +01:00
d2dc1f4623
Format string for translation
...
(cherry picked from commit 6147e997ff
2022-02-14 09:19:02 -08:00
876061369b
Fix some Pcbnew crashes due to null pointers
2022-02-14 13:46:05 +01:00
0eddbe02c1
DIALOG_NETLIST_IMPORT: minor fix
2022-02-14 07:53:00 +01:00
d07910de06
Improve performance of checkZoneZoneConnection.
2022-02-14 01:15:06 +00:00
018f4531a5
Fixes in the SVG import polygon postprocessing:
...
- don't drop subsequent polys when a non-filled primitive is imported 'in between'
- fix missing holes (also related to the interleaving of stroke and filled shapes, depending on the software that wrote the SVG file)
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/10813
2022-02-14 00:54:31 +01:00
4442f76add
update custom rule syntax help to make diff pair rule examples clearer
2022-02-13 13:47:18 -05:00
fe7e72538e
Don't force user to be overly pedantic when writing diffpair rules.
2022-02-13 18:16:13 +00:00
022e7385f9
Beautify the Rule Area Properties dialog.
2022-02-13 18:16:13 +00:00
bff97df5f9
Fix a compil warning, at least on my msys install.
2022-02-13 16:26:05 +01:00
cdd32df3a0
Import netlist: fix issues: do not read netlist before it is selected.
...
Now the netlist must be explicitly selected and read instead of beeing
read during dialog creation.
It also avoid a useless netlist read when closing the dialog or trying
to change the netlist filename.
2022-02-13 16:04:38 +01:00
b7c9a1ad55
Fix repaints getting done after the wrong dialog.
2022-02-13 13:06:35 +00:00
c4e133fdf7
Auto reduction and std::shared_ptr cover types reduction.
...
And a performance optimization or two resulting from above. (Using
const& intead of copying std::shared_ptrs.)
2022-02-13 12:04:03 +00:00
90f6edad61
Move connectivity algo to collision-based routines.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/1800
Fixes https://gitlab.com/kicad/code/kicad/issues/1769
2022-02-13 00:35:11 +00:00
a2ca8cf413
Improve SNR.
2022-02-12 18:38:11 +00:00
8dcc933fc3
Don't use bounding box cache during insideArea.
...
For starters we can't rely on it having been updated, but we also
cache the entire result so there's no huge cost-savings anyway.
Fixes https://gitlab.com/kicad/code/kicad/issues/10821
2022-02-12 18:38:11 +00:00
e742eea7ed
DIALOG_NON_COPPER_ZONE and DIALOG_RULE_AREA_PROPERTIES: add option to set the pitch
...
of hatches around the zone outlines
2022-02-12 18:57:03 +01:00
d553d620c1
DIALOG_COPPER_ZONE: add option to set the pitch of hatches around the zone outlines
...
This parameter exists since the beginning, but never show in this dialog
2022-02-12 18:57:02 +01:00
81b4229e12
altium: Improve test-coverage of *.PcbLib import functionality
...
* Add test-code for pads
* Move test-code into board_test_utils.cpp for reuse, one method per object
* Add a real (rather small) Altium footprint for testing purposes
2022-02-12 16:50:25 +01:00
93c7046a77
Return nominal pad shape when a specific layer isn't specified.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10755
2022-02-11 22:09:22 +00:00
00934fdd84
Move GUI queries in PLUGIN to a callback.
...
Also makes sure legacy zone fills get deleted and re-filled (since
just dropping the outline will change them).
2022-02-11 22:09:22 +00:00
300ee022fa
Drop unsupported fills. No reason to keep them around.
...
Also removes the long-dead segment fill data structures.
2022-02-11 22:09:22 +00:00
68655540eb
Clamp cursor to limits of coordinates representation
...
Also improves large distance handling.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8846
2022-02-11 16:42:52 +00:00
3deaf902bb
Retire the V5 zone fill algorithm.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10578
2022-02-11 13:10:52 +00:00
50a4d610a6
Be cognizant of flashed layers when generating pad shapes.
2022-02-11 13:10:52 +00:00
6e063247e5
Move CN_VISITOR from HitTest() to Collide().
...
The former isn't sufficiently aware of layer differences (such as for
pads with some layers unflashed).
2022-02-11 13:10:52 +00:00
082c6f5bd6
Make sure plotter uses default font when specified.
2022-02-10 20:33:06 +00:00
261b1df47f
fix-npth
2022-02-10 10:06:59 +00:00
3f36e7d725
altium: Start with a test-suite to validate that *.PcbLib footprints are correctly imported
...
The test simply loads every footprint of a library, and compares all elements with an equivalent
KiCad footprint. This allows us to quickly spot regressions in the altium and kicad footprint importer,
and any code in-between. This test is only a demo, as the checks are still incomplete and quite a few
tests are missing.
It has to be noted that mask expansion is not supported rigt now by the altium importer, thus the
reference footprint is adjusted to keep the test happy.
2022-02-09 22:34:04 +01:00
ca56de7816
Show DRC overflows in both tab titles and number badges.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10617
2022-02-09 17:04:32 +00:00
06e00c7957
Fix shadow variable compile warning in text DRC provider.
2022-02-08 09:26:12 -05:00
3b5474f190
Don't punt on TrueType char thickness; analyze it.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10740
2022-02-08 14:10:37 +00:00
137edbe3f3
Add disclaimer for TrueType fonts to thickness test.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10740
2022-02-08 14:10:37 +00:00
3c5ae6d317
Don't let zone cutout on different layer confuse us about intersections.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10583
2022-02-08 14:10:37 +00:00
091055fa1d
Don't count track as a pre-existing connection.
2022-02-08 14:10:37 +00:00
534dc1ba8a
DRC dialog: very minor enhancement: add a busy cursor during tests.
2022-02-08 07:33:01 +01:00
51d7b49067
Don't halt expansion on zero-length
...
We avoid counting endpoints for tracks that have no length
2022-02-07 13:53:42 -08:00
5ce559176d
Overhaul the font metrics calcs for overbar, italics and bboxes.
2022-02-07 17:36:40 +00:00
162545ddf0
Validate arc output when editing
...
Handles checking output of the arc to ensure we don't end up generating
an invalid arc. Also keeps the limit of the arc angle to be (360,360)
excluding 0.
Fixes https://gitlab.com/kicad/code/kicad/issues/10070
(cherry picked from commit 8fc831cbc2
2022-02-07 08:55:53 -08:00
2485648a54
Fix typo in a copy/paste and a minor compil warning
2022-02-07 17:32:19 +01:00
e59aaf05c6
Make sure that GetConnectedItems searches from the root item.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10583
2022-02-06 19:43:25 +00:00
a60aa68b3a
Don't enforce a max of 4 for minimum-spoke-count.
...
See comments in code.
Fixes https://gitlab.com/kicad/code/kicad/issues/10583
2022-02-06 19:43:25 +00:00
79f80c4cd7
altium: Fix Reference and Description parsing of footprint
2022-02-06 16:24:07 +01:00
d9c04da407
Sprinkle in some make_unique
2022-02-05 21:26:36 -05:00
0a5ddb8d40
Add some vector reservations
2022-02-05 21:12:29 -05:00
41f54349a5
Replace inserts/push_backs with emplace in some spots
2022-02-05 19:53:31 -05:00
34a9a165c9
More wide-string declarations.
2022-02-05 22:26:31 +00:00
b2e3f03222
More wide-string declarations.
2022-02-05 22:03:04 +00:00
f8ff104003
Fix a compil issue.
2022-02-05 21:29:44 +00:00
7ccac79192
More wxString wide literals.
2022-02-05 21:29:34 +00:00
9582457fef
Be explicit about literal wide-strings.
2022-02-05 20:40:21 +00:00
290354e3f6
CADSTAR: Fix potential nullptr dereferencing bug
...
Don't assume the footprint will have the pad index that the file references.
2022-02-05 19:20:56 +00:00
b9f1aaf029
Fix typoed test condition for TH no hole pads PVS V501
2022-02-05 11:31:56 -05:00
193dee11e8
Add missing null check PVS V595
2022-02-05 11:25:09 -05:00
8588bea4b2
Avoid potential divide by zero in footprint spreading PVS V609
2022-02-05 11:23:05 -05:00
a7ebfc31f9
Fix some leaking objects identified by PVS Studio V773
2022-02-05 11:16:11 -05:00
57df1b469a
Allow dialogs to force evaluation of UNIT_BINDER
...
When setting previous values, we don't get the "OnFocus" event, so the
evaluation would not get triggered by simply repeating (using the
keyboard)
Fixes https://gitlab.com/kicad/code/kicad/issues/10752
(cherry picked from commit 4c81307391
2022-02-04 10:04:54 -08:00
42917874dd
Add duplicated items to parent group.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10155
2022-02-04 14:26:57 +00:00
4cc1ced2f3
Log an undo item when filling zones.
...
If we wanted to put it into the parent's undo item, then the *parent*
would need to not start a new undo record. Not starting one in the
zone filler tries to add it to the *previous* change, not to the parent
change.
Fixes https://gitlab.com/kicad/code/kicad/issues/10091
2022-02-04 13:45:32 +00:00
93c3e6bd16
Clean up formatting.
2022-02-04 13:43:57 +00:00
8d3e1639d0
Update text variables when they change.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10734
2022-02-04 12:52:46 +00:00
ca7840334c
Mark some limits as constexpr
...
gcc doesn't need it and computes during compile regardless, but experimenting in godbolt, both clang and MSVC actually do need it or else it's partially computed at runtime
2022-02-04 07:50:13 -05:00
917845cf00
Ensure we can version scripting properly
...
Adds Version() and FullVersion() calls to support reporting version to
scripts and scripting window
Fixes https://gitlab.com/kicad/code/kicad/issues/10079
(cherry picked from commit 0a13f15a9d
2022-02-03 15:59:10 -08:00
b9eb3e9b05
Be more explicit about string conversions.
2022-02-03 23:07:41 +00:00
6905cfb95b
Update error message to match new arc dialog
...
We now provide arc end points and interior angle, so we cannot check for
null radius in the same fashion. Instead, the starpoint==endpoint
indicates a zero radius
Fixes https://gitlab.com/kicad/code/kicad/issues/10714
(cherry picked from commit ef94f31204
2022-02-03 14:32:23 -08:00
168ad58eef
Convert strings to wide when using wxString routines
...
WxString does not allocate space for wide strings needed during
conversion unless the string is explicitly wide. This can cause buffer
over/underflow
Fixes https://gitlab.com/kicad/code/kicad/issues/10605
(cherry picked from commit 7601a3385f
2022-02-03 13:08:33 -08:00
92dc06ac9d
Don't convert KIID on the fly
...
Converting to string on save prevent unneeded ops
(cherry picked from commit 901685f01b
2022-02-03 10:35:31 -08:00
a970acd0bc
Fix some issues related to new textboxes and python:
...
- Fix duplicate class names returned by GetClass().
- replace MTEXT name (in GetClass) by better name (FP_TEXT, FP_TEXTBOX...)
- Add missing Cast_to_PCB_TEXTBOX and Cast_to_FP_TEXTBOX
2022-02-03 13:55:37 +01:00
a2f845a41c
Handle invalid pads more gracefully
...
Pads generated outside of KiCad may have self-intersecting polygons that
simplify to multiple sets. We handle this by adding multiple primitives
for such polygons and limiting our fracture calls to only polygons that
have holes
Fixes https://gitlab.com/kicad/code/kicad/issues/10712
(cherry picked from commit 6d84acfacd
2022-02-02 13:40:07 -08:00
c8d14ade65
Only run starved-thermals checks when pad is actually connected to zone.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10583
2022-02-02 13:09:27 +00:00
27c25debea
teardrops: fix a not very good shape for not round targets after code change.
2022-02-02 13:31:29 +01:00
61b2b0ff0c
EAGLE plugin: use specified RATIO value for text size calculation
2022-02-01 17:58:09 +00:00
e560e765e6
PCB_TEXT::Rotate(): ensure the final orientation is -180 ... +180 deg
2022-02-01 18:07:14 +01:00
bebfbce9b2
Move pcb file rep of text_boxes to strokes.
2022-02-01 16:29:59 +00:00
0faf3a8bf5
Get rid of FP_TEXTBOX::ViewBBox(). We want to inherit FP_SHAPE's.
2022-02-01 12:49:28 +00:00
63a3b1e20a
Estimate outline font thickness for DRC readability checks.
2022-02-01 12:01:04 +00:00
1f8c29c395
Coverity fixup.
2022-02-01 12:01:04 +00:00
56d204c4c9
Revise transferDataToPad to return False on failure
...
When the data doesn't allow the pad to be drawn, we return false and
skip the redraw/update steps. This allows updating with invalid values
while typing
Fixes https://gitlab.com/kicad/code/kicad/issues/10684
2022-01-31 17:02:10 -08:00
803675195d
Be more diligent in preventing drag line errors
...
They can happen even when there are no collisions, so we need to reset
the 'ok' flag before using the line again.
Fixes https://gitlab.com/kicad/code/kicad/issues/9555
(cherry picked from commit 833ce19221
2022-01-31 16:13:53 -08:00
098e8f7d9b
Revert "cmake: adding KICAD_MACOSX_APP_BUNDLE option"
...
This reverts commit ea9f960cc1
2022-01-31 15:57:56 -08:00
f3cd36d1d7
Bring EEschema textboxes in line with PCBNew's.
...
Also adds Border checkboxes and fixes a bunch of bugs.
2022-01-31 21:46:40 +00:00
5739505aa3
TextBoxes for PCBNew.
2022-01-31 20:00:47 +00:00
60bcfd1bf1
Bug fixes in arc & textbox printing.
...
Also removal of the no-longer-used clipping code from GR*.
2022-01-31 20:00:47 +00:00
c494274b2e
export D356 netlist: fix incorrect id for pads type connectors.
...
these pads are similar to SMD pads and should have the same id.
Fixes #10694
https://gitlab.com/kicad/code/kicad/issues/10694
2022-01-31 19:53:02 +01:00
7b01530eca
EDA_ANGLE: use existing Normalize180 function here
2022-01-31 18:16:49 +00:00
f846f6f704
PCB_CONTROL::unfilledZoneCheck(): skip rule areas: they are not filled by definition.
...
Fixes #10691
https://gitlab.com/kicad/code/kicad/issues/10691
2022-01-31 17:01:52 +01:00
a8486c5296
Fix warning: declaration shadows a previous local [-Wshadow].
2022-01-31 10:41:51 +00:00
e9ffea83fd
Cross-probing: Do not center/zoom on empty BBox
2022-01-31 10:17:59 +03:00
419010ec46
teardrop: add filtering to skip teardrops when pad/vias and tracks have similar sizes
2022-01-30 15:39:28 +01:00
3a66f33d96
TEARDROP_MANAGER: add option to add teardrops on pads in zones.
2022-01-30 15:39:27 +01:00
cc2a897e2b
very minor fix
2022-01-30 09:08:21 +01:00
aef665b1e2
PCB_TARGET: add missing TransformShapeWithClearanceToPolygon() method.
...
Fixes #10653
https://gitlab.com/kicad/code/kicad/issues/10653
2022-01-29 18:19:22 +01:00
ad84b62b63
Prevent multiple single-point line solutions
...
Suggested by @rivimey, we test the case where both lines return singular
point lines and prevent them leaking into our drag solution
Fixes https://gitlab.com/kicad/code/kicad/issues/9555
(cherry picked from commit 38a4894d92
2022-01-29 07:07:29 -08:00
43f5a7c746
DIALOG_PLOT: use a short living quasimodal dialog instead of a long living window.
...
In this case, a quasimodal dialog is the right way.
Fixes #10650
https://gitlab.com/kicad/code/kicad/issues/10650
2022-01-29 13:14:22 +01:00
c01e2dcfec
Fix large memory leak in DRC
...
All elements get effective shapes, many of which get triangulated. This
memory needs to be freed when destroying the tree
(cherry picked from commit c2707f3cc0
2022-01-28 17:08:33 -08:00
16e802aff4
Don't count zero-length as duplicate
...
We were checking for duplicate tracks by looking to see if the two
tracks had two shared points. A null track always matched this case,
which removed the valid track. We solve this by avoiding null tracks in
the duplicate checker. They are removed separately in the null track
stage.
This also fixes a GTK-specific tree issue where we require the
BeforeReset()/AfterReset() calls instead of Cleared() to prevent GTK
from dereferencing a parent after freeing
Fixes https://gitlab.com/kicad/code/kicad/issues/10624
(cherry picked from commit 8753051db6
2022-01-28 16:34:34 -08:00
ea9f960cc1
cmake: adding KICAD_MACOSX_APP_BUNDLE option
...
ADDED: with cmake KICAD_MACOSX_APP_BUNDLE option the user can disable
the macOS app bundle creation when compiling on macOS. This permit to
use/install KiCad like any other *nix platform (/usr/bin, /usr/share,
ecc.). By default, cmake build the app bundle.
2022-01-28 15:49:37 -08:00
7277fd6218
Don't allow degenerate lines in dragger
...
If walkaround returns an invalid line, don't consider it for a track
Fixes https://gitlab.com/kicad/code/kicad/issues/9555
(cherry picked from commit 8ae304dcca
2022-01-28 15:19:06 -08:00
0036f44e37
Support (and save/recall) zoom in/out in Custom Rules editor.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/5796
2022-01-28 21:38:15 +00:00
5b8eb8f9ec
SVG plotter rework: use mm as units in file. Remove useless inch option.
...
Use 4 digits in mantissa as default and when exporting SVG.
Allow 0 as line width: this is the right value to draw filled shapes with no outline thickness.
2022-01-28 19:33:51 +01:00
901a9387e9
Fix python fp wizards according to last kicad code changes, especially EDA_ANGLE
2022-01-28 19:33:51 +01:00
d32a72ddde
Fix PCAD arc import
2022-01-28 10:20:18 -08:00
09886bac38
Fix missing pcbcommon dependency declaration.
...
The pcbnew_navlib library didn't have a proper dependency chain. It
relies on headers that come from pcbcommon.
2022-01-28 12:21:42 +00:00
233b537170
Fix code style.
2022-01-28 12:21:42 +00:00
8663a399ac
Move pcbnew_navlib compilation into pcbcommon.
...
Although pcb_base_frame.cpp is in the pcbnew source tree, it is compiled
and included in pcbcommon.lib. Because pcb_base_frame has a dependency
on pcbnew_navlib, the latter also needs to be included in pcbcommon to
avoid linkage issues.
The superfluous references to pcbnew_navlib in the qa projects have been
removed.
2022-01-28 12:21:42 +00:00
b263e89dfe
Enable 3D mouse support in Footprint viewer.
...
The 3D mouse support is moved from PCB_EDIT_FRAME to PCB_BASE_FRAME.
This allows all PCB_BASE_FRAME derived windows to have 3D mouse enabled
2D navigation support.
2022-01-28 12:21:42 +00:00
8e43409d27
Invoke correct base method in PCB_BASE_EDIT_FRAME::handleActivateEvent.
...
The base class of PCB_BASE_EDIT_FRAME is PCB_BASE_FRAME. Invoking
EDA_DRAW_FRAME::handleActivateEvent in the PCB_BASE_EDIT_FRAME override
will skip the definition in PCB_BASE_FRAME.
2022-01-28 12:21:42 +00:00
be58ab679b
Fix coding style policy violations and CMake version.
...
Fix violations of 4.2.2 Function Definitions and 4.2.3 Control
Statements.
Set the minimum CMake version required to build to 3.1.
Removed the Visual Studio solution and project files.
2022-01-28 12:21:42 +00:00
91d261d735
Fix "Error loading editor" when no 3Dconnexion driver installed.
2022-01-28 12:21:42 +00:00
87d7bdbd5e
* PCB_EDIT_FRAME: Implement SpaceMouse navigation and command export for 3D-viewer.
...
Added full support for using a 3Dconnexion device in PCB_EDIT_FRAME. Commands are exported and can be assigned to 3D mouse buttons. Any limitations to the functionality are limitations of the installed 3Dconnexion driver for the device and OS.
Use build option KICAD_USE_3DCONNEXION (default = ON) to control whether the SpaceMouse support is compiled into the solution.
2022-01-28 12:21:42 +00:00
2345e09a12
Pcbnew, export svg: Fix incorrect saving of layer set.
2022-01-27 13:03:00 +01:00
744bc0bd18
altium: Fix pcb arc import using a hack with PCB_SHAPE as intermediate object
...
It would be nice to not use the workaround with PCB_SHAPE, but better than creating wrong geometries in the first place. This should be improved when I'm more in the mood to think about geometric.
2022-01-25 22:24:01 +01:00
5a2f351f28
altium: Refactor shape based region parsing to make it reusable for footprint import
2022-01-25 21:54:25 +01:00
f651e31965
Fix minor compil and Coverity warnings.
2022-01-25 12:52:13 +01:00
e5d5ee07f0
Resolve textvars in plot directory.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10405
2022-01-23 18:14:07 +00:00
f3a583e490
Formatting & comment cleanup.
2022-01-23 18:14:07 +00:00
8838a3cb81
When focusing on Unconnected Items use ratsnest endpoints.
...
(instead of item centers)
Fixes https://gitlab.com/kicad/code/kicad/issues/9233
2022-01-23 18:14:07 +00:00
be99240c8c
Fix strings and update French translation
2022-01-23 13:22:32 +01:00
712b304da7
Teardrop: Simplify code.
2022-01-23 12:57:40 +01:00
1b42152ba0
Teardrops: store parameters in BOARD_DESIGN_SETTINGS.
2022-01-23 10:57:08 +01:00
Seth Hillbrand
markus-bonk
Jeff Young
Wayne Stambaugh
Mike Williams
jean-pierre charras
Frank Zeeman
Marek Roszko
Thomas Pointhuber
Fabien Corona
Frank Palazzolo
Jon Evans
Tomasz Wlostowski
Steffen Mauch
Greg Davill
qu1ck
Mikolaj Wielgus
Graham Keeth
dsa-t
木 王
Roberto Fernandez Bautista
Jonathan Haas
Davide Gerhard