e80a1c2679
CADSTAR PCB: Don't load items on invalid layers
...
This was happening in two cases:
- Loading documentation symbols (CADSTAR on purpose defines these in an
invalid layer)
- When an item was in a "layer set" such as ALLELEC or ALLLAYER - need to
make sure we remove the copper layers that are not active in the design
2021-10-09 20:07:23 +01:00
895f4ca989
Cleanup 3D model filename validation
...
Don't veto the changed event anymore and instead just display the
feedback in the error column of the grid.
2021-10-08 22:30:20 +01:00
8d71bdc3e1
Cleanup unit handling in the stackup drawing tool
2021-10-08 22:30:20 +01:00
677166f0b8
CADSTAR PCB: Rule Areas have zero width
...
Cadstar areas have a line width but this is only for display purposes.
Instead CADSTAR uses the center line when determining whether a DRC
violation occurred.
2021-10-08 21:27:32 +01:00
2dfbd42be6
CADSTAR PCB: Legacy netclass and design settings loading is required
2021-10-08 20:48:10 +01:00
ae0229b7c9
CADSTAR PCB: Add imported nets to the imported netclass.
2021-10-08 20:25:09 +01:00
58fc4f512d
CADSTAR PCB: Don't create zero width tracks
...
Fixes a bug in the route offsetting part of the import
that was resulting in zero-width tracks being imported.
2021-10-08 20:25:09 +01:00
16b61e47cd
CADSTAR PCB: Clear arcs from polys before boolean ops (e.g. zone fills)
2021-10-08 20:25:09 +01:00
fb588da875
CADSTAR PCB: Fix loading of thermal relief gap in zones
...
We were loading as solid fill when the relief gap was exactly the
same as the minimum width.
Also we can do better than just load as solid fill when it is smaller:
we can instead just use the minimum width and at least it still will
have thermal reliefs.
2021-10-08 17:39:08 +01:00
4d6b1a4e36
pns_diff_pair_placer: fix empty message when a signal of a pair is not found.
...
Fixes #9334
https://gitlab.com/kicad/code/kicad/issues/9334
2021-10-08 14:57:01 +02:00
cb47bf25c0
CADSTAR PCB: Actually load the original route code as a KiCad NETCLASS
...
We weren't actually loading it into the design settings even though
everything else was already being correctly loaded.
2021-10-07 22:13:06 +01:00
f9c83dbc44
Fix footprint type memory
...
The flags don't map quite right, so we keep the memory of the drop-down
and translate to flags. This protects against flag values changing
2021-10-07 11:29:51 -07:00
51d3440c38
Use footprint type to inform new pad type
...
Makes usage cleaner. If the user specifies that they are creating an
SMD, they should get SMD pads by default so that they don't have to
change them later.
Fixes https://gitlab.com/kicad/code/kicad/issues/9333
2021-10-07 11:10:26 -07:00
57c7d663b0
Fix bone-headed mistake when moving panel disabling.
2021-10-07 00:17:42 +01:00
ad85f8078a
Reverse escaping when transferring multi-line
...
We escape the strings coming out of the DIALOG_TEXT_PROPERTIES window,
so we need to unescape the ones coming in
Fixes https://gitlab.com/kicad/code/kicad/issues/9327
2021-10-06 13:25:03 -07:00
a8ec3b58ed
Use via's real drill value for hole size
...
If the via drill is "Default" be sure to get the default value rather
than the placeholder
Fixes https://gitlab.com/kicad/code/kicad/issues/9313
2021-10-06 11:00:58 -07:00
1bb5fc3fd6
Work around EnsureVisible bug in wxWidgets during DRC cross-probe.
...
Also adds double-click-marker to open DRC dialog and select marker
in list.
Fixes https://gitlab.com/kicad/code/kicad/issues/7246
2021-10-06 11:17:03 +01:00
95f841a037
A more nuanced method of making Board & Schematic Setup read-only.
...
This one still allows you to scroll to see all contents.
Fixes https://gitlab.com/kicad/code/kicad/issues/9302
2021-10-06 11:16:46 +01:00
9a8d1246cc
We don't keep a CHANGELOG.TXT
...
Direct interested readers to AUTHORS.TXT instead.
2021-10-05 19:46:53 -07:00
548e5f49bd
Clean up unused variable usage
...
Unused variables in function calls can be commented out. Unused
return variables get a new routine `ignore_unused()` that silences the
warnings with zero overhead.
2021-10-05 10:00:30 -07:00
92008a089a
Disable Board & Schematic Setup controls when project is locked.
...
(or missing).
Fixes https://gitlab.com/kicad/code/kicad/issues/9302
2021-10-04 16:47:27 +01:00
ffd6fde700
Improve consistency and hotkey access in Appearances.
...
Added hotkey for cycling through net & netclass color modes.
Added hotkey for cycling through ratsnest layer visibilities.
Added code to display hotkey (if set) on the above and on high-contrast
cycle.
Fixes https://gitlab.com/kicad/code/kicad/issues/9312
2021-10-04 13:44:43 +01:00
930c4e5582
Cleanup.
...
Formatting.
Naming conventions.
Use of auto.
Use of STL cover types.
2021-10-03 19:42:29 +01:00
11c91c7179
Improve obscuring dialog algorithm to handle multiple dialogs.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8970
2021-10-03 13:27:46 +01:00
5c402a64ab
Use mathematical rotation direction in Move Exactly dialog.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/1897
2021-10-03 00:11:01 +01:00
574bef2237
Normalize drawing sheet path to env vars & prj, not just prj.
...
Also cleans up the dialog a bit.
Also changes the workings of NormalizePath to return the input if
it couldn't be shortened which saves open coding that behaviour in
all its callers.
Fixes https://gitlab.com/kicad/code/kicad/issues/9036
2021-10-02 23:39:45 +01:00
e2baacec21
Add cross-probing between PCB (markers) and DRC marker list.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7246
2021-10-02 23:39:45 +01:00
da79a3dd69
Option graphics limited to 45deg in creation: separate options for brd and fp editors.
...
Add these options in PANEL_EDIT_OPTIONS.
This option was previously living only in some context menus, not really visible.
2021-10-02 16:43:31 +02:00
10dd70881c
New paramaterized interface doesn't like quoted parameters.
...
(At least on MSW, anyway.)
2021-10-02 14:08:36 +01:00
ef74421922
Move centering of lib-tree item to idle event.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9294
2021-10-01 22:46:14 +01:00
5f5ee7335d
Formatting.
2021-10-01 21:49:14 +01:00
f606679164
Proper numeric sorting for intersheet refs.
...
Also expunges the horrifically named std::remove and std::remove_if
(neither of which remove anything).
2021-10-01 18:29:21 +01:00
dd1d36d40a
Fix segfault when check for editing points
...
The point editor is not always available when checking for points. We
need to handle the missing tool without crashing
2021-09-30 17:25:33 -07:00
a738257c43
Remove a tool tip not related to the parent widget.
2021-09-30 20:17:45 +02:00
e7ae3a181f
Handle casing for FocusOnItem
...
Some items are complex (footprints) and some don't have logical polygons
(PCB_MARKER), so we can't transform everything. So, handle the items we
can transform normally and use bbox or boundinghull for everything else
2021-09-29 16:19:49 -07:00
12b726ba2f
Prevent the point editor from fighting with other tools.
...
1) Don't start a long-click timer when the point editor is active.
2) Don't auto-start a wire when the point editor is active.
Fixes https://gitlab.com/kicad/code/kicad/issues/9270
2021-09-29 19:16:06 +01:00
ee2789943f
Supply grid with a GRID_TRICKS.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9273
2021-09-29 18:44:19 +01:00
0438a45176
Don't allow reentrancy into PlaceFootprint.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9269
2021-09-29 17:01:33 +01:00
3b6da14614
Don't allow offset for circular pads.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9266
2021-09-29 15:27:34 +01:00
07e01e6297
Allow converting graphic arc to track arc
2021-09-28 21:00:15 -04:00
2e120528c8
Length Tuner: Allow single meander when it fits on its own
2021-09-28 18:50:31 +01:00
71156368c9
Length Tuner: Allow controlling the side of the meander using the cursor
...
Also fixes an issue that did not allow single meanders to be placed
2021-09-28 18:50:31 +01:00
f73042fe24
Some minor performance enhancements.
2021-09-28 14:28:35 +01:00
fac48ddafb
Don't include stale nets in net counts.
...
Fixes bug reported by Franck.
2021-09-28 14:28:12 +01:00
d90dc77e00
Selection: Don't drop small moves
...
If we do a real drag, the timer will be cancelled. If we don't, then
the user is still holding the mouse button down and would probably like
to see the menu. Otherwise it appears the action is dropped.
2021-09-27 16:44:32 +00:00
726f9ebe3d
Pcbnew: Router tool should not block drag selection when idle
...
The other drawing tools allow drag selection while idle. Also, it makes
it more obvious to the user when accidentally drag selecting while
routing than just doing nothing on a drag with the routing tool selected
and idle.
2021-09-27 16:05:13 +00:00
544fa939f8
Lock/unlock group members when locking/unlocking group.
...
Also moves the stateful selection filter to after the hierarchy filter
since the hierarchy filter might swap a pad selection for a footprint
selection.
Fixes https://gitlab.com/kicad/code/kicad/issues/9255
Fixes https://gitlab.com/kicad/code/kicad/issues/7542
2021-09-27 11:29:52 +01:00
dfe4997664
Fix nullptr crash.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9250
2021-09-27 10:27:25 +01:00
5f3c67bd2b
Fill in some missing GetMsgPanelItems and make some others consistent.
...
Also expunges a std::vector<MSG_PANEL_ITEM> cover type.
2021-09-27 00:23:40 +01:00
e2368b733c
Allow selection of NPTH pads with zero copper size
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9249
2021-09-26 18:17:50 -04:00
422def1261
Move cross-probe scrolling to FocusOnLocation.
...
It handles not moving the display too much and using the exposed
center if there is a dialog over the window.
Fixes https://gitlab.com/kicad/code/kicad/issues/8985
2021-09-26 20:06:50 +01:00
a3dcdd4887
Allow highlight-net to work on zone copper.
...
We were already checking zones separately (after tracks and pads); we
just weren't setting the flag that causes the COLLECTOR to also test
zone fills.
Fixes https://gitlab.com/kicad/code/kicad/issues/5924
2021-09-26 19:26:22 +01:00
5853f0890e
Gerber job file: fix a bug that prevent writing dielectric constants for impedance controlled boards.
2021-09-26 16:11:15 +02:00
b799d563e5
Slight improvement to track & via clearance option text.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8838
Fixes https://gitlab.com/kicad/code/kicad/issues/8839
2021-09-26 11:02:57 +01:00
77f47b6e47
Avoid assertion in some cases.
2021-09-26 10:54:50 +02:00
9f64850325
Drawing stackup table: fix a few issues and missing items.
...
Fixes #9243
https://gitlab.com/kicad/code/kicad/issues/9243
Fixes #9244
https://gitlab.com/kicad/code/kicad/issues/9244
2021-09-26 10:31:41 +02:00
6b25099df7
Read/write lock status for fp text.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9325
2021-09-25 20:37:56 +01:00
3e7310a219
Move FP type check to FP DRC
...
Checks for validity are better centrally located where they don't
interrupt user actions
2021-09-25 08:56:27 -07:00
46949abe4a
Don't scroll to highlight an object already visible.
2021-09-25 15:31:52 +01:00
c3b6939ea7
Allow quiet creation (scripting)
2021-09-24 13:49:45 -07:00
bb95ca2966
Make MW footprints proper attrib
2021-09-24 13:48:01 -07:00
64be61b4d6
Allow user to set footprint type up front
...
The default is usually wrong and presenting the basic footprint
information when creating an empty footprint allows the user to
establish their preference before mistakes occur.
Fixes https://gitlab.com/kicad/code/kicad/issues/9215
2021-09-24 13:48:01 -07:00
a6fc885402
Component->Footprint label
2021-09-24 13:48:01 -07:00
963a8ee42d
Warn users when creating footprints about mismatch
...
Checks to see if the footprint attribute matches the type of pads
contained in the footprint. Can prevent issues during fabrication if
users forget to adjust them during creation.
Fixes https://gitlab.com/kicad/code/kicad/issues/9215
2021-09-24 13:48:01 -07:00
1b0c274e22
Python: Copy board iterables to prevent segfaults
...
Python code like:
for track in board.GetTracks():
board.Remove(track)
Would delete tracks in the the underlying m_tracks while iterating over
it.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/5192
2021-09-24 19:40:46 +00:00
bf145dd633
Confine allow-locked-pad-selection-even-when-filtered to single-select.
...
Also make sure text in a locked footprint is not selected if the locked
items filter is unset.
Fixes https://gitlab.com/kicad/code/kicad/issues/9227
2021-09-24 18:58:22 +01:00
c38de1dcaf
Pull back some 7.0 fixes to Custom Rules code completion.
2021-09-23 13:08:31 +01:00
a2ad204f4b
Fix off-by-one in AssembleTuningPath
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9003
2021-09-22 20:25:22 -04:00
5975524826
Fixup PCB_ONE_LAYER_SELECTOR
...
It is useful to be able to tell which layer you are selecting. The
checkboxes, on the other hand, provide no information when dealing with
a single layer selection
2021-09-22 15:57:27 -07:00
140e4cbe28
Avoid assertion on 2-layer board
...
New boards may have INVALID_LAYER inbetween F_Cu and B_Cu in the
stackup. Skip these and any layer values beyond what we store currently
2021-09-22 12:37:17 -07:00
84864351c7
Fix units naming in stackup
...
We were not handling the new mils/inches division in stackup table
Fixes https://gitlab.com/kicad/code/kicad/issues/9210
2021-09-22 12:30:02 -07:00
16ec6fbec4
Plugins: Fix QR code generator shape exception
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9079
2021-09-22 11:15:26 -04:00
be799b49a8
Fix equality in dp matching
...
A single count is found when dp ends with matching char. .Right(0) will
return an empty wxString() which is still valid
Fixes https://gitlab.com/kicad/code/kicad/issues/9206
2021-09-21 19:47:15 -07:00
cf53b053a1
Improve handling of dragging around locked segments
...
Locked segments now are not modified if they weren't the start item.
If a locked segment is the start item, it is automatically unlocked.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9145
2021-09-21 22:38:53 -04:00
2ec1c215cd
Drop selection after hiding items.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8605
2021-09-21 17:02:34 +01:00
65c9170b46
Pcbnew: Clear tool and selection before updating PCB from schematic
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9196
2021-09-21 00:06:56 +00:00
22a29a42cf
Generalize net DP matching
...
The requirement of 1-2 numbers following P/N or +/- was arbitrary and
not needed. We also add the _ to allowable suffixes to permit DP
matching of auto-renamed nets
2021-09-20 15:30:47 -07:00
32a5653464
Remove yet more single-pad-net stuff.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9179
2021-09-20 22:04:02 +01:00
04aff93248
Eagle doesn't use netclass clearance so make them the board clearance.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/2442
2021-09-20 21:31:19 +01:00
dc1fd3d9ba
PNS test app: Add logging information for curved track routing
2021-09-20 20:35:24 +01:00
f66654247a
Read netclasses when importing Eagle projects.
...
Also creates a DRU file with the various netclass-to-netclass
clearance rules from the Eagle clearance matrix.
Fixes https://gitlab.com/kicad/code/kicad/issues/1774
2021-09-20 12:38:56 +01:00
8848f7158d
Fix a Coverity warning (non tested pointers, really a bug)
2021-09-20 09:14:10 +02:00
40a0f25a3e
Formatting.
2021-09-19 19:30:09 +01:00
6ea7e59991
Fix "done" message being in wrong place for drill files.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9172
2021-09-19 19:26:10 +01:00
3651d7c5e7
Remove vestiges of old zoom-auto architecture.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9055
2021-09-19 18:32:15 +01:00
6e7ce09572
Use more descriptive terminology for preferred text editor.
...
Also improves execution to allow the preferred editor to include
parameters, such as "/usr/bin/open -e".
Fixes https://gitlab.com/kicad/code/kicad/issues/9131
2021-09-19 15:17:26 +01:00
403826b97c
Respect the model show setting for vrml and idf export
...
Fix #9166
2021-09-19 08:16:18 -04:00
9f03a259f9
Remove no-longer-needed options from Update PCB and Import netlist.
...
The delete-single-pad-nets one is particularly problematic as it
makes some of the cross-probing features not work.
Fixes https://gitlab.com/kicad/code/kicad/issues/9179
2021-09-18 18:32:19 +01:00
b931883876
PANEL_FP_PROPERTIES_3D_MODEL: fix an issue when trying to edit a filename (MSW specific).
...
On Windows, FILENAME_RESOLVER::ValidateFileName() always returned a illegal filename test,
because the separators ('/' and '\') are in list of illegal chars in filenames on MSW.
2021-09-18 18:17:54 +02:00
4779850c10
Add done messages to various plotters.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9172
2021-09-18 10:39:57 +01:00
847c9e32c8
Don't allow the draw via tool to activate in the footprint editor
...
Fix #9186
2021-09-17 23:01:16 -04:00
34c2bd58d1
Disable ungroup where there are no groups in the selection.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9182
2021-09-17 22:21:33 +01:00
7b07b1650c
Don't draw titlebar for untitled groups.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9181
2021-09-17 22:01:17 +01:00
5c07441e24
Remove Setup Dialog assignment of netclasses to buses.
...
Also removes the message bar display of assigned netclass for
buses and bus-to-bus entries.
Also fixes a bug where assigning a netclass via the canvas only
looked at the first level of bus members (and not any nested
members).
Also fixes a bug where the bus name validator tried to validate
a vector bus first -- which doesn't work as a vector bus may be
nested in a group bus.
Also fixes a bug where we were failing to check for illegal
chars in bus definitions which otherwise passed the bus parsers.
See additional comments in the bug report.
Fixes https://gitlab.com/kicad/code/kicad/issues/9160
2021-09-17 22:01:17 +01:00
86ffb9a4bb
Bring a little more consistency to the Text & Graphics Defaults panel.
2021-09-17 22:01:17 +01:00
d90094de39
Fix progress dialog main frame focus issue on Linux.
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8718
2021-09-16 15:53:18 -04:00
2479e1d7b1
Improve common settings property grouping.
...
Also moves apply-icon-scaling-to-fonts to its own checkbox. (We used
to try to infer when to do it, but that turns out to be a rathole.)
2021-09-16 18:31:44 +01:00
fdd9df6dff
Linear brightening doesn't work well for colours near white.
2021-09-16 14:17:52 +01:00
e2ce2e6ca9
Correct slight misalignment in Library Link fields.
2021-09-15 21:17:18 +01:00
b84d1456d5
KIFACE_I -> KIFACE_BASE.
2021-09-14 23:45:14 +01:00
3aae3c6f65
Dark mode for a bunch of HTML dialogs.
...
WX_HTML_REPORT_BOX
WX_HTML_REPORT_PANEL
HTML_MESSAGEBOX
DIALOG_DISPLAY_HTML_TEXT
Fixes https://gitlab.com/kicad/code/kicad/issues/9157
Fixes https://gitlab.com/kicad/code/kicad/issues/9156
2021-09-14 21:23:57 +01:00
4447843dc1
Defensive coding around getting an OnUpdateUI before we're ready.
...
This appears to happen at least on GTK when the 3DFileResolver throws
up error dialogs when paths can't be found.
Fixes https://gitlab.com/kicad/code/kicad/issues/9163
2021-09-14 13:35:31 +01:00
4d478d6f17
Fix ordering of initialization in length tuner
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9161
2021-09-14 07:48:02 -04:00
b27b97809f
Clean up several bugs in Graphics Cleaner.
...
See bug report for more details.
Fixes https://gitlab.com/kicad/code/kicad/issues/9150
2021-09-13 18:04:17 +01:00
32e23d993e
Formatting.
2021-09-13 17:18:58 +01:00
fdfecf5932
Don't push view control settings to the previous active tool.
...
See further comments in bug report.
Fixes https://gitlab.com/kicad/code/kicad/issues/9147
2021-09-13 13:28:05 +01:00
1cf1a23250
footprint.cpp: seriously speedup CoverageRatio() and GetCoverageArea().
...
Previoulsy, they calculated the area of polygons after using Simplify() and Fracture().
But polygon areas can be easily calculated without these transforms.
So they are just removed (they are really time consummig).
2021-09-13 13:41:36 +02:00
daca9d21f2
Add dxf point import
...
Fix #9149
2021-09-12 19:38:52 -04:00
814b6b8e86
Fix disabled layer error text
2021-09-12 17:14:24 -04:00
62f7a09290
Smooth out a few minor inconsistencies in fonts & spacings.
2021-09-12 17:57:15 +01:00
a5247471f7
Expunge a bunch more fixed font specs from wxFormBuilder files.
...
Also removes the -1 sizing of the status bar on GTK and MSW.
Fixes https://gitlab.com/kicad/code/kicad/issues/8608
2021-09-12 13:53:12 +01:00
0ac765c5bb
Special case footprint zones which can be on "inner layers".
...
Also improves the reporting so that it reports the actual conflict
layer rather than just the first layer the object is on.
Fixes https://gitlab.com/kicad/code/kicad/issues/9144
2021-09-12 13:53:12 +01:00
83d7c731d3
Pcbnew, plot poly in footprint: fix a bug introduced by my commit 3316f3
...
Polys in footprints were not moved, rotated to the right place.
2021-09-12 11:01:15 +02:00
74fd23f573
Add (off by default) build option to link kicad2step directly into pcbnew
...
Because debugging it separately is annoying.
2021-09-11 22:56:16 -04:00
9c78e4cf54
Mac needs different font size handling than MSW & GTK.
...
Mac already uses diverse font sizes (for instance, smaller fonts for
radio button groups), and the anti-aliasing is a lot better. The
other platforms need a more limited range of sizes.
Fixes https://gitlab.com/kicad/code/kicad/issues/8608
2021-09-11 23:40:31 +01:00
ed8b63505d
Fix font scaling issues in StatusBar and Selection Filter.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8608
2021-09-11 18:25:11 +01:00
625e56676a
Add progress reporting to CADSTAR Schematic & PCB importers
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8685
2021-09-11 17:50:19 +01:00
fbee62fc15
Tie font size scaling to when automatic icon scaling fails.
...
It appears that SetSymbolicSize() and ConvertDialogToPixes() fail
under the same circumstances.
2021-09-11 15:29:51 +01:00
3316f3998a
Rename BuildPolyPointsList() to DupPolyPointsList() and optimize code
...
to avoid multiple useless copies of the list of polygon corners in code.
2021-09-11 14:21:36 +02:00
ad59254be8
Another round of font sizing tweaks.
...
It appears that both strategies in the last commit worked, leaving us
with squared scaling. The dialog pixel architecture seems safer than
our icon scaling stuff, so this version attempts to use only it.
Also works around a bug where wxELLIPSIZE_MIDDLE doesn't work on Mac.
Fixes https://gitlab.com/kicad/code/kicad/issues/8608
Fixes https://gitlab.com/kicad/code/kicad/issues/8375
2021-09-10 21:46:13 +01:00
7a822b55aa
Another round of changes to attempt to fix the GTK font size issue.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8608
2021-09-10 15:59:50 +01:00
29c2f3b7d4
Prevent jumping into disambiguation if moved
...
Moving points should not be overrided by disambiguation menu, so we
track where the disambiguation event started and only trigger the menu
if the mouse hasn't moved a full unit in x/y
Fixes https://gitlab.com/kicad/code/kicad/issues/9132
2021-09-09 16:24:18 -07:00
fe9bdd41d9
Finalize modifier update
...
Update the preference pane info text
Also standardizes the use of "Option" instead of "Alt" for Mac users.
Fixes https://gitlab.com/kicad/code/kicad/issues/9129
2021-09-09 10:47:43 -07:00
5e742d97b6
Export VRML: fix bug that prevent to merge 3D footprint shapes to the board file.
...
Fixes #9127
https://gitlab.com/kicad/code/kicad/issues/9127
2021-09-09 18:05:17 +02:00
1a43515128
Repair multi-layer disabled layer tests.
2021-09-09 16:43:47 +01:00
bb2efa0649
Improve disabled layer test.
...
1) handle graphic items on copper layers
2) handle items on multiple layers
2021-09-09 15:20:48 +01:00
567767346c
VRML exporter: fix broken export, at least on msys2.
...
For an obscure reason, some floating values were fully broken. the small
change in code fixes this strange issue.
2021-09-09 16:08:51 +02:00
f0a26e4be0
Attempt to fix long-click issue (possibly just a typo).
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9124
2021-09-09 12:20:30 +01:00
f013dbc7c4
More uniform handling of status fonts.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8608
2021-09-08 21:34:22 +01:00
3b16c38756
Coverity issue fixes.
...
Fix Coverity issues 157138, 338547, and 338716.
2021-09-08 14:51:27 -04:00
30c001265b
pcbnew, undo_redo.cpp: fix a logical bug that can hang in rare cases.
2021-09-08 13:06:55 +02:00
c8b2e69332
Check if selection is primary tool
...
Previously, we were checking if the selection tool was the top of the
stack but this ignored many other "secondary" tools that might be
running such as the point editor. These still allow the selection tool
to handle events such as clicks. This change allows the selection tool
to handle clicks when it is the primary tool on the stack rather than
the top
Fixes https://gitlab.com/kicad/code/kicad/issues/9110
2021-09-07 10:42:01 -07:00
4ee0b28ffc
Coverity issue fixes.
...
Fix Coverity issues 338623, 338716, and 338717.
2021-09-07 13:38:56 -04:00
c816168e42
Fix crash when drawing item
...
When drawing before commit, the items do not have a board and therefore
no BDS. In these cases, take a decent default until committed
2021-09-07 09:08:44 -07:00
9cf7c7800b
Use same text positioning algorithm in LibEdit and Eeschema.
...
Also fixes some uninitialized variables in PCB painter.
Fixes https://gitlab.com/kicad/code/kicad/issues/8947
2021-09-07 12:33:06 +01:00
2ac03e2cdb
Change Loss Tg to Loss Tan.
...
We'll need Tg in the future for glass transition temp.
Fixes https://gitlab.com/kicad/code/kicad/issues/4734
2021-09-07 10:49:17 +01:00
1792a985a7
Use board's maxError value when possible.
2021-09-07 00:14:18 +01:00
0e3c79d3b2
Remove inappropriate icons
...
Icons should be used sparingly to draw attention to the most used actions
2021-09-06 21:23:52 +00:00
0f38a35531
Be sure to stop the timer when triggering d-click
...
Some mice apparently trigger double-click without triggering a click, so
stop the timer when we receive this event
Fixes https://gitlab.com/kicad/code/kicad/issues/9106
2021-09-06 12:27:31 -07:00
343dbf0f5b
Change default 45° hotkey to shift-space
...
This requires enabling the space key to be bound with shift, which was
disabled based on an overbroad limit of only allowing shift to be mapped
with letter keys
2021-09-06 12:18:29 -07:00
36048fa436
OPENGL_GAL::DrawArcSegment(): use a better number of segm to approximate the arc.
...
Previously, the count of segments used a magic number optimized for Pcbnew.
This is not good, and does not work well on Gerbview.
The count uses now a max error acceptable is approximation (5 microns in Gerbview and Pcbnew).
Fixes #9101
https://gitlab.com/kicad/code/kicad/issues/9101
2021-09-06 16:36:47 +02:00
56ccaf6482
Constrain move tool when set
...
Move tool works slightly differently from other tools when figuring out
new locations. This uses the global 45 enable flag to set proper item
locations when the user is requesting a 45° constraint on movement
2021-09-06 07:05:25 -07:00
86725db758
Ensure doInteractivePlacement enforces snap option
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9105
2021-09-06 06:36:33 -07:00
d2bff137ee
.kicad_pcb file: fix incorrect keyword stored for some (not all) PAD properties.
...
( a copy-paste error? )
Fixes #9102
https://gitlab.com/kicad/code/kicad/issues/9102
2021-09-06 09:15:18 +02:00
240c3b75c4
Move selection disambiguation to long-click
...
This standardizes selection tools in SELECTION_TOOL class to be able to
handle a long-click as asking for a non-heuristic disambiguation menu.
Fixes https://gitlab.com/kicad/code/kicad/issues/8490
2021-09-05 13:42:51 -07:00
092cdc0bb5
Move 45° limit to hotkey
...
This assigns the "Tab" key to a general pcbnew 45° limitation. Limit
can be enabled/disabled using context menu as well.
Removed the user preference for 45° limitation on graphic lines as that
is overlapping with the general limitation, which is not an editing
preference so much as a temporary adjustment to tool action.
Related to https://gitlab.com/kicad/code/kicad/-/issues/8490
2021-09-05 13:42:51 -07:00
69a31f41b8
Fix typo.
...
Last commit added the correct code, but failed to delete the buggy code.
Fixes https://gitlab.com/kicad/code/kicad/issues/9090
2021-09-05 21:23:55 +01:00
921b6c826b
Fix another disappearing string on Mac.
2021-09-05 21:23:55 +01:00
36bcff34f7
Label the three track and via properties for UX
2021-09-05 08:54:45 -04:00
59c15842f8
Exclude formatting chars from text width approximation.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9080
2021-09-04 22:09:32 +01:00
6818539f6d
Repair is-selected logic in various global editors.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9090
2021-09-04 18:10:25 +01:00
a397e85589
Implement PTH/NPTH/courtyard collision tests.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9081
2021-09-04 00:16:26 +01:00
e2a1e5d4a1
DIALOG_EXPORT_STEP: fix regression: missing default filename initilization
2021-09-03 16:22:32 +02:00
e03257b55f
Allow close placement of stitching vias
...
When placing a stitching via for a bypass capacitor, it is common to
place it close to the relevant pad. If the via does not have the
correct net, this will violate DRC and be prevented.
Checking for zone-based net assignments allows the workflow to proceed
2021-09-01 15:52:35 -07:00
f14e5b61b3
Ensure newly added pads are counted
...
When adding a new footprint, don't delete the single-pad nets until you
check for the net being added as part of the footprint
Fixes https://gitlab.com/kicad/code/kicad/issues/9053
2021-09-01 15:12:28 -07:00
e0011fcd93
Display a nice error message instead of asserting
...
When we mess up, it will be nice to not lose users' data. This requests
a bug report if the netlist parsing breaks instead of throwing
2021-09-01 12:02:06 -07:00
8a305eec32
Remove broken RefDesStringCompare
...
This function attempted a poor-man's natural compare but it assumed
specific structure of the string. This broke for strings with
numberings that looked like decimals.
Instead, we use our natural string comparison function and remove the
references to this older function and its similar elements.
Fixes https://gitlab.com/kicad/code/kicad/issues/9067
2021-09-01 11:48:01 -07:00
04fa678265
Impleent persistence for no-connect pad setting.
...
Also moves rotation increment from a display property to and edit
property.
(Both issues were discovered while working on a 7.0 feature.)
2021-09-01 00:00:12 +01:00
2cdd3c9ebf
Work-around incorrect spacing (and order) of buttons on Mac.
2021-08-31 22:39:25 +01:00
8fa04eeb75
FP_TEXT::TransformShapeWithClearanceToPolygon(): fix broken rotation of the shape.
...
Only the FP_TEXT shape must be rotated, not the full buffer used for storage.
Fixes #9057
https://gitlab.com/kicad/code/kicad/issues/9057
2021-08-31 17:04:03 +02:00
b5a3385ea9
Overhaul file locking system.
...
See bug report for details.
Fixes https://gitlab.com/kicad/code/kicad/issues/8919
2021-08-31 15:04:31 +01:00
6c7c9ca50c
Fix compil warnings (UNDO_REDO::GROUP renamed to UNDO_REDO::REGROUP to fix
...
collision name with a widows header on msys2)
2021-08-28 11:44:01 +02:00
0f7c0e3872
PCM implementation
2021-08-27 21:11:47 +00:00
78ab69027d
Add 3rdparty/plugins to plugin search
2021-08-27 21:11:47 +00:00
10247c268e
Pcbnew: implement Find Next
...
Moves all of the find dialog control out of the selection tool similar
to the schematic editor. Dialog is also non-modal now to match the
schematic editor.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8966
2021-08-27 18:15:36 +00:00
0b2e66d3b7
Infobar: Don't use animations on Windows/GTK
...
Seems to cause issues on Windows where the animation locks the screen.
Doesn't effect Linux, possibly because wxWidgets uses a native GTK
infobar that doesn't animate anyway.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8987
2021-08-27 17:38:16 +00:00
436ad0ede7
Add missing token to DRC rule parser.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9041
2021-08-27 12:49:07 +01:00
43194dff72
Pcbnew: don't fallback to software rendering after changing footprint
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8915
2021-08-26 18:00:33 +00:00
ee5f9034f7
pcb parser: ensure the parser is reinitialized before parsing a new fp file
...
Because the same parser is used to read all footprint files of a library,
the parser must be reinitialized (internal variable cleared) before reading
a new file, otherwise the previous parser state is applied to the next file.
Fixes #7627
https://gitlab.com/kicad/code/kicad/issues/7627
2021-08-26 19:38:20 +02:00
f4905cb1ae
Cherry-pick fix from 7.0 branch back to master.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9005
2021-08-25 20:14:11 +01:00
5f2d238c93
Work around GTK issue with wxSearchCtrl
...
Also remove redundant icons in LIB_TREE (recent GTK
search controls have an icon built-in)
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9019
2021-08-24 23:04:28 -04:00
2b3477ca28
Handle RGBA conversion to hexadecimal format for wxWidgets 3.0
2021-08-25 02:40:17 +01:00
f926eab76d
Cherry-pick Footprint Properties dialog fix from 7.0 branch.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9021
2021-08-25 02:40:17 +01:00
a7bd621419
Remove checkboxes that can't be unchecked (part 1)
...
The checkboxes for copper layers should probably also be removed
but leaving them for now since they direct the user to the right
place to disable copper layers.
2021-08-24 20:29:03 -04:00
a03b6f6fc9
router: use tail start point when saving the FIXED_TAIL
...
fixes: https://gitlab.com/kicad/code/kicad/-/issues/8771
2021-08-25 00:36:34 +02:00
4c17b7ab46
WALKAROUND::Route Check if path is empty before stepping
...
singleStep expects a path with at least one point.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9020
2021-08-24 20:17:19 +01:00
a02ea1609b
A more robust solution to the 3D color opacity issue.
...
(This also fixes a typo in the previous fix that assigned the opacities
backwards.)
2021-08-24 11:24:25 +01:00
a9f092b370
Pcbnew, Printing system: fix broken print of pads on tech layers.
...
To print pads on tech layers, view layers LAYER_PAD_FR, LAYER_PAD_BK and
LAYER_PADS_TH must be always enabled, and items we do not want print on these layers
must be printed using a invisible color (opacity = 0.0)
2021-08-24 10:27:53 +02:00
e6ca9837a2
Clear numbers from non-numberable pads and don't run DRC on them.
...
This was also the last straw on the misnamed PAD::GetName() and
PAD::SetName(), which are now PAD::GetNumber() and PAD::SetNumber().
Fixes https://gitlab.com/kicad/code/kicad/issues/9017
2021-08-24 01:03:06 +01:00
baab2e6119
Attempt to fix SWIG issue.
2021-08-23 22:04:31 +01:00
21f2b235ce
Rework stackup colors a bit to support opacity for 3D viewer.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9012
2021-08-23 20:00:17 +01:00
fec34e8dd8
Get rid of an extraneous layer parameter.
...
Also adds a bit of nullptr safety.
2021-08-23 20:00:17 +01:00
6f5e602df9
Fix solder mask plotting issues.
...
1) Don't plot all footprint texts for each footprint graphic item.
2) Correctly handle multi-layer zones.
2021-08-23 20:00:17 +01:00
9770962ab4
Fix logic bug in rule processing.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9011
2021-08-22 20:16:58 +01:00
1fa5e43597
Fix some dodgy logic in clearance overrides.
2021-08-22 03:24:51 +01:00
b9ffe2aca8
Don't capture stack-defined lambdas by reference.
2021-08-21 22:49:57 +01:00
3b3cb88ad9
Remove shadowed variable in lambda
2021-08-21 14:01:20 -07:00
eb85af3366
Don't capture references to local stack variables.
2021-08-21 21:40:17 +01:00
1fd555ce0e
Added code to map footprint lib nicknames when exporting.
...
This is particularly useful when you import (for instance) an
Altium board and then save the footprints out to a new library.
Fixes https://gitlab.com/kicad/code/kicad/issues/6345
2021-08-21 19:00:59 +01:00
3efa391eb2
Attempt to prevent control hiding problems on GTK
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8902
2021-08-21 13:37:07 -04:00
09ea630d8e
Don't log a potentially invalidated item
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9006
2021-08-21 12:24:41 -04:00
0814219513
Clean up some handling of project files in standalone
...
Add control of project creation to Eeschema; change defaults
to enable project creation in both programs. Properly set
project on newly-created schematics so "Save As" doesn't
get triggered repeatedly.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9000
2021-08-21 12:09:21 -04:00
3e57700b21
Process rules in "natural" order using overrides.
...
(We used to process in reverse order with first-match-wins, but
that doesn't allow min, max and opt to come from different rules.)
Fixes https://gitlab.com/kicad/code/kicad/issues/9004
2021-08-21 16:43:11 +01:00
048e13f423
Defer DRC rule function eval to make use of short-circuit bools.
...
The lemon parser doesn't lend itself to short-circuiting booleans,
but if we defer processing until we fetch the second value when
processing the TR_OP_BOOLEAN opcode then we get to piggy-back on
C++'s boolean short-circuiting.
2021-08-21 16:43:11 +01:00
1e23ce1c95
Pull some fixes back from 7.0.
...
1) An earlier 6.0 fix to apply pad clearance overrides to NPTH pads
got broken, so this replaces it.
2) Allow min/max/opt to be set by different rules.
3) Fixes a bug where board minimum enforcement over a local override
didn't get the right message text.
2021-08-21 16:43:11 +01:00
71b7816de5
DIALOG_GEN_FOOTPRINT_POSITION and dialogs print: minor enhancements:
...
Gen footprint: 2 options are now stored during a session.
Gerbview and Pcbnew dialogs print: avoid useless large size of right panel.
2021-08-21 11:06:00 +02:00
7ea4d4da85
Fix errant tabs
2021-08-20 17:24:05 -07:00
d9c7fdc28e
Pcbnew add SMD only option to component placement export
...
Add option to only use footprints flagged as SMD
when creating a componenet placement files.
Signed-off-by: Dominik Sliwa <dominik@sliwa.io>
2021-08-20 17:24:05 -07:00
db5ce824af
Use wildcard routine for extension matching
...
Move STEP export dialog wildcard to extension matching
2021-08-20 17:24:05 -07:00
4cd9278041
Remove most wxFilepicker wildcards from translations
...
This prevents translation errors from preventing user actions such as
opening the correct file
2021-08-20 12:56:47 -07:00
c80efb0f98
Fix save/load of appearance panel width on show/hide
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8982
2021-08-19 21:15:14 -04:00
46b959c3e3
Move plotter headers into include folder.
2021-08-18 16:38:31 -04:00
5574682d44
Fp editor: minor fixes:
...
- do not show the paste special context menu: it has no sense in this editor
- Paste command: fix incorrect rotation of pasted FP texts
2021-08-18 17:43:10 +02:00
82849eda42
Fp editor: fix some crashes when trying to duplicate referece or value texts.
...
Fixes #8990
https://gitlab.com/kicad/code/kicad/issues/8990
2021-08-18 15:34:32 +02:00
6427197962
Remove duplicate headers in plot and associated code.
2021-08-17 15:41:25 -04:00
9ae9301b46
Fix shadowed variable.
2021-08-17 12:54:14 -04:00
8b5f393804
DRC bug fixes and debugging improvements.
...
1) Don't wait for UpdateUserInterface to build the (global) list of
layer names.
2) Report clearance resolution between a silk layer and a mask layer.
3) When writing DRC reports, include info about the violating rule.
4) Report "no relevant layers" if we fail to find anything to write
a clearance resolution report about.
Fixes https://gitlab.com/kicad/code/kicad/issues/8963
2021-08-17 15:41:12 +01:00
a133853a4f
Fix typo in DRC error link.
2021-08-16 20:05:35 +01:00
ca42f31bb5
Pcbnew, update footprint: fix loss of net info in some cases.
...
When pads having a similar name but some were not on a copper layer
(aperture pads) the net info update from old footprint to the new footprint
was incorrectly transferred. Now, only pads on copper layers are considered.
Fixes #8979
https://gitlab.com/kicad/code/kicad/issues/8979
2021-08-16 20:52:49 +02:00
da3fda8dee
Fix typo in non-copper zone fill pattern, and cleanup spacing.
...
Also makes better use of UNIT_BINDER and fixes some other naming
inconsistencies with copper zone dialog.
2021-08-16 13:24:12 +01:00
1a252b4f96
Add a compile error for ill-defined rules, and more performance.
...
Also adds const-safety to GetBoard().
2021-08-16 12:14:17 +01:00
f0c957a2e2
Enable LAYER_MOD_TEXT_FR layer in fp editor as it should.
...
It also fixes a crash when changing visibility of other fp texts..
2021-08-16 09:30:54 +02:00
f34e280c81
Garden-variety 100X performance improvement.
...
Adds a compile mode for layer strings.
2021-08-15 22:24:51 +01:00
eaccbce48b
Fix logic errors in progress reporting in a couple of DRC providers.
2021-08-15 22:24:44 +01:00
1ec70d30af
Cherry-pick some 7.0 Clearance Resolution improvements.
...
6.0 will be in the field for a long time, and the better the debugging
tools we have available the less costly it will be to maintain.
Fixes https://gitlab.com/kicad/code/kicad/issues/8961
2021-08-15 19:03:58 +01:00
48521774cd
Formatting.
2021-08-14 21:18:11 +01:00
41619ebbe2
Decouple PROGRESS_REPORTER interface from implementations.
2021-08-14 21:05:49 +01:00
8ac5e318fb
Ugly hack to avoid crash on msys2 when running Pcbnew after running Eeschema+its Python console
...
The main bug still exists, but at least Kicad does not crash.
2021-08-14 21:08:56 +02:00
8eba0b356b
Fix issues calling SaveBoard on board loaded from PcbNew frame
...
KiCad cannot have more than one board/project open, so disallow
the Python APIs for loading additional boards when the frame is
present. Inherit the SETTINGS_MANAGER from the frame when present
instead of creating a new one that won't have the loaded project.
2021-08-14 09:18:21 -04:00
bff247b08a
Hook up 3D viewer colors to board stackup.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/5173
2021-08-14 14:00:17 +01:00
05fb582304
Expose missing annular ring properties in Track & Via Properties.
2021-08-14 10:49:42 +01:00
3d61c8b0c4
PANEL_SETUP_BOARD_STACKUP: Do not limit the EpsilonR mantissa to 1 or 2 digits.
...
Fixes #8956
https://gitlab.com/kicad/code/kicad/issues/8956
2021-08-14 09:42:05 +02:00
80355f04a9
Fix SHAPE_LINE_CHAIN::Replace at end of chain
2021-08-13 16:59:45 -04:00
e5586fb974
Accept legacy hole token as well as new hole_size.
2021-08-13 21:28:11 +01:00
d34e9e8946
Code safety.
2021-08-13 21:28:11 +01:00
35d5223825
Keep track of existing/excluded references when re-annotating the PCB
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8211
2021-08-13 19:09:37 +01:00
aa67abb681
PNS::NODE Use PointCount instead of calculating segment index manually
...
There is no need to manually calculate the segment index - we know
that the last point that was added is the start point of the segment.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8945
2021-08-13 19:09:33 +01:00
4c3954aea8
Clearer DRC rule token name for hole_size.
2021-08-13 16:18:56 +01:00
3b26db745f
Use more standard terminology.
2021-08-13 15:18:47 +01:00
5bfafa5e4c
Add rounding epsilon to convert tool polygon search
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8927
2021-08-12 20:17:04 -04:00
98d0ce00ee
Defensive coding.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8790
2021-08-12 21:35:05 +01:00
02e7d9f809
pcbnew: swap x/y align text to match vertical/horizontal text on right click...
2021-08-12 13:03:52 +00:00
f4a7565b9c
fix a compil warning
2021-08-11 08:16:26 +02:00
13fc16b03f
Fix uninitialized variable.
2021-08-10 16:51:30 +01:00
c536a4c4f2
Work around annoying wxWidgets assert.
2021-08-10 16:51:30 +01:00
a208dac8d8
Convert hole clearance tests from NPTH holes to all holes.
2021-08-09 22:26:00 +01:00
0120c5fa4b
PNS Length Tuning: Recover original arc tracks after tuning
2021-08-09 21:10:33 +01:00
69322a18e7
Fix missing call to ClearArcs()
2021-08-09 09:16:04 +02:00
a90656900a
Allow creating polygon types from polygons
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7302
2021-08-08 20:29:00 -04:00
e91218b876
PNS: don't mark holes only if there's also a solid violation
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8874
2021-08-08 15:41:39 -04:00
3beeb52c43
Convert tool: create lines on active layer, not source layer
2021-08-08 15:12:23 -04:00
2d9b06cbf9
Fix missing flatten step when filling zones with arcs
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8923
2021-08-08 15:09:12 -04:00
54942a1401
Fix typos that would result in fp zone setting written into pads.
2021-08-08 18:12:29 +01:00
e38c366695
Narrow zone dialog a bit.
2021-08-08 18:12:29 +01:00
fa82fcb809
Router tool: ensure a internal layer exists when placing a microvia.
...
Fix also a minor compil warning.
Fixes #8931
https://gitlab.com/kicad/code/kicad/issues/8931
2021-08-07 20:29:49 +02:00
bafa105ed0
Enforce hole clearance on NPTHs in zones.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8924
2021-08-06 18:16:38 +01:00
a10f2b284c
Unify negative zero and percent handling in UNIT_BINDER.
...
Some values, such as solder mask margins, are usually negative and it
helps to display zero as "-0.0".
2021-08-06 18:16:38 +01:00
e81b7b4a14
Give a few dialogs a bit of love.
...
1) improve spacing in copper zone properties.
2) improve spacing and naming in dielectric material properties.
3) clearer naming in board setup > constraints.
4) remove over-exuberant stretching in board setup > mask & paste.
2021-08-06 18:16:38 +01:00
6a9a177fa3
Remove zone filler arc collision workaround
2021-08-05 17:45:12 +01:00
77680eba30
Naming conventions.
2021-08-05 14:31:36 +01:00
5bf0b99813
Capture errant mouse-up from locked dialog in move tool.
...
Don't pass it on to other tools where it causes all kinds of mayhem.
Fixes https://gitlab.com/kicad/code/kicad/issues/7255
2021-08-04 17:42:40 +01:00
76bdb423d7
Minor changes: minor code cleanup and fix minor Coverity warning
2021-08-04 16:47:41 +02:00
ae99e627bd
Quiet Coverity.
2021-08-04 13:55:42 +01:00
46bdce2747
Don't allow pads in groups in the board editor.
...
Bad stuff happens, including crashes.
2021-08-04 13:55:42 +01:00
65f6e72b4c
Improve commenting.
2021-08-04 13:55:42 +01:00
ac933d4e83
Fp editor: avoid having nil uuids when editing old footprints.
...
In Fpeditor, nil uuid has a special meaning and cannot be used as uuid in fp items.
Fixes #8914
https://gitlab.com/kicad/code/kicad/issues/8914
2021-08-04 12:37:52 +02:00
c5e195bdff
Cleanup (includes and formatting).
2021-08-03 18:37:23 +01:00
95b87ba29a
Freshen microwave polygon dialog and remove a bunch of dead code.
2021-08-03 01:11:11 +01:00
43523df843
Measure distance from pad center, not pad hull.
...
Otherwise we think the wrong end of really short track segments is
connected to the pad, leaving the other end dangling.
Fixes https://gitlab.com/kicad/code/kicad/issues/8909
2021-08-02 22:42:54 +01:00
8b9161b27d
Be more careful with alpha value.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8850
2021-08-02 18:24:16 +01:00
6f1837b300
Formatting.
2021-08-02 01:52:58 +01:00
c51b1dad72
Generalize infobar MESSAGE_TYPE handling and use for DRC errors.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8782
2021-08-01 21:51:39 +01:00
0d539a84a2
Fix bugs in Tracks Cleaner.
...
1) Implement more robust connection checking so we don't decide very
short segments with both endpoints within a single track are connected
at both ends.
2) Make use of the IS_DELETED flag to perform iteration during dryRun
so that all deletions to be made are flagged.
Fixes https://gitlab.com/kicad/code/kicad/issues/8883
2021-08-01 15:50:01 +01:00
b573712326
Cleanup.
2021-08-01 15:37:12 +01:00
0f5a8f87d3
Add writing of pad primitive polys with arcs, and fix a bug in reading.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8827
2021-08-01 10:47:00 +01:00
faa1ff4ec6
Add false-negative DRC tests (and fix first bug found by them).
2021-07-31 16:41:44 +01:00
7b4dcb6e10
Refactor ExportSpecctraFile to be usable in API
...
Currently there is pcbnew.ExportSpecctraDSN() but it needs a pcbnew
frame set which makes it unusable outside of the scripting window or a
plugin.
This refactors actual exporting logic into separate helper and adds an
overload to ExportSpecctraDSN(board, filename) that doesn't need pcbnew
window.
2021-07-31 09:55:48 +00:00
6cd4d68d57
Add drop shadows to MacOS icons
...
Apple UI guidelines ask for small drop shadows on the icons. We add
these using ImageMagick when resizing
2021-07-30 20:55:34 -07:00
e7d8b1a975
Resize MacOS icons and script their creation
...
Creates a script that will fomat the MacOS icons at 80% of the total
size in line with Apple's guidelines.
Script requires Inkscape 1.0 and png2icns (available on Linux boxen)
Fixes https://gitlab.com/kicad/code/kicad/issues/7977
2021-07-30 20:28:14 -07:00
ad8acd328c
Expunge some remaining references to kicad-pcb
2021-07-30 20:27:45 -07:00
bceb3794f8
Remove ZONE_FILLER_TOOL since it's not really necessary.
...
It was causing intermittent failures on GTK. We'll no doubt want
tools in the QA framework at some point, but probably not necessary
for 6.0....
2021-07-31 01:50:42 +01:00
8c69a856fc
Add zone filler tests.
...
One test has pads of a bunch of different shapes and provokes some
errors to make sure they're caught.
The others are all past issues with the zone filler to make sure we
don't suffer any regressions. (They should all just pass with no DRC
errors.)
2021-07-30 17:09:24 +01:00
8aea2cbd03
When ignoring click events don't ignore synthetic ones.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7255
2021-07-29 18:07:04 +01:00
138a965c2a
Remove shadowing member variable.
...
Perhaps the compiler always gets this right, but it's still confusing
when reading the code.
2021-07-29 16:03:25 +01:00
9271ac1a4f
Don't allow deletion of pads when not in allow-free-pads mode.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8884
2021-07-29 16:03:25 +01:00
6aaf4413b3
Fix kicad_string.h / string.cpp mismatch.
...
They don't define a KiCad string class, so the header file name was
somewhat misleading. But the fact that they didn't match definitely
made coding more difficult.
2021-07-29 16:03:25 +01:00
f221220fe2
Rename layer ids file.
...
It hasn't had anything to do with colors or visibility for some time
now.
2021-07-29 16:03:25 +01:00
46338403e7
Unwrap some std::library typedefs.
2021-07-28 22:16:38 +01:00
befd30a1a1
Switch the board footprint properties window to use the new 3d models panel
...
This allows it to also get the badge showing errors in the panel.
2021-07-28 20:56:17 +01:00
1a4a3400ba
Split the footprint 3d model panel into its own class
...
This allows it to be shared by both the PCB editor properties dialog
and the fpeditor dialog.
2021-07-28 20:56:17 +01:00
f233f4a0a9
Expunge EDA_FILE_SELECTOR.
...
EDA_FILE_SELECTOR was just an obfuscation of wxFileSelector().
2021-07-28 14:12:51 -04:00
b6e1fe11b6
Fix a collision name (perhaps msys2 specific)
2021-07-28 19:39:50 +02:00
36d66085f5
Add a column showing 3D model file loading errors
...
This adds an icon to the left of the row with an error symbol if the
file can't be found or opened, and shows a tooltip over the icon with
and error string.
Fixes https://gitlab.com/kicad/code/kicad/issues/3815
2021-07-28 16:42:22 +01:00
c0f12cf8b0
PCB painter: skip early to polygon algo in outline mode
2021-07-28 10:37:56 +00:00
369d813a32
Pass std::string by reference instead of on the stack where applicable.
2021-07-27 13:30:05 -04:00
1f2e7a94ca
Change Move Exactly hotkey to Shift + M to avoid OSX minimize.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8864
2021-07-27 18:20:32 +01:00
dd5676f4bc
Implement a safer (RAII) tool re-entrancy guard.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8873
2021-07-27 16:37:34 +01:00
886dc2f43e
Do-not-show-again section for common prefs & zone fill warning infobar.
...
Note that the dialogs which have mutliple options were not moved over
as it seems perahps not the right choice to have them save state between
sessions.
Fixes https://gitlab.com/kicad/code/kicad/issues/8762
2021-07-27 15:15:49 +01:00
c74148fa88
Add infobar for those who confuse zone filling with display modes.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8762
2021-07-27 15:15:49 +01:00
37b200cb3e
Pass wxString objects by reference instead of on the stack.
2021-07-27 08:41:27 -04:00
78e5e98ea0
Pass VECTOR2I objects by reference instead of on the stack.
2021-07-27 08:41:27 -04:00
c946070005
Fix TRACKs not being cast correctly in API
2021-07-26 22:37:22 +00:00
8fd83cbb95
Pass wxPoint objects by reference instead of on the stack.
2021-07-26 15:35:33 -04:00
e62969d007
Move zone fracture display mode to AdvancedCfg, and add triangulation.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8762
2021-07-26 18:57:35 +01:00
89b1fdabe9
Pass COLOR4D object by reference instead of on the stack.
2021-07-26 13:28:56 -04:00
cb917e4c42
Avoid nonsensical intersections
...
When two segments are approximately parallel, we shouldn't look to find
their intersection. It will never be the nearest point and it overflows
the KiROUND call
Fixes https://gitlab.com/kicad/code/kicad/issues/8858
2021-07-26 09:02:54 -07:00
d613292b67
Fix type in group command enablement.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8821
2021-07-25 13:31:52 +01:00
39e938db3e
Save the show-page-limits setting.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8825
2021-07-25 13:29:16 +01:00
42086a455d
fix blind via early return in VRML exporter
2021-07-25 12:22:55 +00:00
373f0335c8
Convert Altium radial dimensions to leaders.
...
This is because we don't yet support radial dimensions.
Also fixes a bug where we fail to read an Altium circular track. We
now convert it to a pair of 180-degree arcs.
Also fixes a bug where we were failing to import prefixes on linear
dimensions.
Fixes https://gitlab.com/kicad/code/kicad/issues/8789
2021-07-24 14:25:59 +01:00
531f5480a7
Reduce line-breaks and increase SNR.
2021-07-24 14:25:59 +01:00
dd31a5383b
Added the double click to footprint editor
2021-07-24 08:53:09 +00:00
31d2b2df8b
QA test: fix a wx assert about Locale when running qa_python tests.
...
Probably happens only when the system locale uses a comma as fp separator.
2021-07-23 11:45:45 +02:00
04b9b15255
Fix copy/paste error.
2021-07-23 01:11:22 +01:00
8d1dd1f8b0
Handle pad->custom conversion more closely
...
When converting pads to custom polygons, avoid padding with the polygon
width and keep the anchor pad within the boundary of the original pad
itself
Fixes https://gitlab.com/kicad/code/kicad/issues/8842
2021-07-22 12:12:42 -07:00
a16b85db67
Read/write group locked state. Show locked state in dialog & statusbar.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8796
2021-07-22 12:49:30 +01:00
49e1b5785f
PCB_SHAPE::GetFocusPosition(): returns a point on the outline instead of center.
...
This function is used in DRC to locate a graphic shape. For not filled shapes,
this point must be on the shape outline, not on the center of the shape (the center
shows nothing)
Fixes #8832
https://gitlab.com/kicad/code/kicad/issues/8832
2021-07-22 10:41:50 +02:00
1a301d8eea
Stop using wxDialog::EndModal() from inside dialogs.
...
Calling wxDialog::EndModal() directly from inside the dialog is a
potential bug if the dialog is shown in the modeless or window modal
(quasi-modal). Use the internal button events where possible and
check for the appropriate mode before calling the correct end dialog
function.
2021-07-21 17:38:14 -04:00
0fb864d596
Pull some name changes back from 7.0 to ease merging.
2021-07-21 20:58:59 +01:00
af90d47edc
Altium: Fix calculating third arc point from uninitialized memory
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8671
2021-07-20 19:13:32 +00:00
234b414e2c
Fix misplaced break after code cleanup.
2021-07-20 17:05:00 +02:00
cf00319c85
More NULL expunging.
2021-07-20 07:27:18 -04:00
75190370dd
Convert -> Create from Selection
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8818
2021-07-19 18:45:33 -04:00
6a886e7085
Wizard qrcode_footprint_wizard.py: fix a minor issue and update code.
2021-07-19 18:36:58 +02:00
8bacc9fccb
Fix python 'testing for equality' syntax
...
'Testing whether an object is 'None' using the == operator is inefficient and potentially incorrect.'
Per https://lgtm.com/projects/g/KiCad/kicad-source-mirror/?mode=tree&ruleFocus=7900090
2021-07-19 15:42:30 +00:00
e61822c9e0
Naming conventions and a bug fix on arc points.
2021-07-19 13:17:12 +01:00
9cb4c9bfc2
3D viewer: ensure the activity messages are displayed on Linux after Frame creation.
2021-07-19 10:10:25 +02:00
a43ca978df
3D viewer: do not build the board 3D data during 3D frame creation, but after.
...
Building the 3D data is time consuming, so creating the data after the 3D
frame is shown is better, and the build activity is visible, especially on Linux.
2021-07-18 17:55:40 +02:00
56412cc843
PCB_TEXT: remove "hide" option, because they are never hidden.
...
- avoid write "hide" option in file
- always return true when calling IsVisible()
Fixes #8806
https://gitlab.com/kicad/code/kicad/issues/8806
2021-07-18 14:58:21 +02:00
1a5e63bcab
PANEL_SETUP_BOARD_STACKUP: fix a incorrect behavior when changing layer count,
...
and add a button to adjust dielectric thickness (regression fix)
Fixes #8800
https://gitlab.com/kicad/code/kicad/issues/8800
2021-07-16 20:39:00 +02:00
c794a6ce7a
Add pdb install option for msvc
2021-07-14 23:42:45 -04:00
e61b1f03b8
PNS: Discard duplicate tracks in FixRoute
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8737
2021-07-13 21:13:40 -04:00
ff2e470a6e
Remove virtual items from clearance calculations
...
Extends 3ea970f8c9https://gitlab.com/kicad/code/kicad/issues/8788
2021-07-13 16:10:36 -07:00
3ea970f8c9
Don't add virtual items to the display
...
By definition virtual vias should only exist in the backend, not
affecting users
Fixes https://gitlab.com/kicad/code/kicad/issues/8788
2021-07-13 15:52:41 -07:00
2f41dd4074
Fix unit var warning
2021-07-13 09:53:31 -07:00
f0513978ff
Back-port some fixes from 7.0 branch.
2021-07-13 17:24:23 +01:00
8b3ccab0a3
Implement explicit polygon construction for most pad shapes
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8650
2021-07-13 14:51:58 +00:00
0446d35f0d
Fix source comment/doc typos (follow-up)
...
Found via `codespell -q 3 -S *.po,./thirdparty -L aactual,acount,aline,alocation,alog,anormal,anumber,aother,apoints,aparent,aray,dout,einstance,modul,ot,overide,serie,te,,tesselate,tesselator,tht`
2021-07-13 10:48:17 +00:00
8d65663566
Copper Zone Properties dialog modifications
...
* Changed the net sorting mechanism make it similar to the 'Net Inspector' window
* Replaced the 'Show All Nets' check box with 'Hide auto-generated nets' check box
* Replace the warning label with wxInfoBar
* Removed unused controls and renamed controls where applicable
* Re-arranged the Copper Zone Properties dialog layout to improve user experience
* Minor code refactoring of DIALOG_COPPER_ZONE class
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8547
2021-07-12 21:55:46 +00:00
2889861c0b
Remove unused variables.
2021-07-11 23:42:40 +01:00
e953cb6a27
Add default severities for new DRC violations.
2021-07-11 23:33:17 +01:00
54b6f51633
DSN export: export RECT and ARC shapes (on silkscreen layer) from footprints
...
Also export arc track segments as lines. (Freerouter does not support QARCs)
Fixes #8769
https://gitlab.com/kicad/code/kicad/issues/8769
2021-07-11 18:15:40 +02:00
01d3a88faa
Allow unnamed embedded step files in altium boards.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7898
2021-07-10 16:37:45 +01:00
e02bb80bf3
Handle cancel when selecting copper layer.
...
Also changes the algorithm to ask only once, rather than one per
non-copper-layer object.
Fixes https://gitlab.com/kicad/code/kicad/issues/8767
2021-07-10 12:05:25 +01:00
625006ca30
Remove front/back SMD pad color now that we have opacity sliders.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8761
2021-07-10 10:13:55 +01:00
a06b95bb1f
Even out spacing around various panels.
2021-07-09 23:42:45 +01:00
11cd8738a3
Put wxSearchCtrl back by eliminating the excess focus events that in Windows land cause a "select all"
...
The setfocus calls were really because of the overtly aggressive mouse handler for the canvas that has been patched out.
2021-07-09 18:08:32 -04:00
046fb58183
Better command names and tooltips for zone fill/unfill commands.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8762
2021-07-09 22:13:50 +01:00
387cd36f60
Fix GenCAD Export flipped footprints
...
GenCAD Exporter flips the board footprints before exporting. The
exporter assumes that the flip happens T/B and not L/R.
Fixes KSC Issue #356
2021-07-09 09:44:30 -07:00
c5571afbd9
Teach GenCAD exporter to handle chamfered rect pads
...
Chamfered rect pads can also have rounded corners, so we handle these
using a polygon transform before exporting
2021-07-09 09:44:30 -07:00
6c3ba1c20b
Coverity issue fixes.
...
Issues #332032 , #332086 , #332157 , and #332171 .
2021-07-09 10:56:35 -04:00
473f10ab1f
Tooltips for Board Setup > Constraints.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8764
2021-07-09 13:06:59 +01:00
2bd735b631
A little more safety in setting the router idle mode.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8765
2021-07-09 10:26:12 +01:00
00f1b609c4
PNS: Don't run fanout cleanup when manually forced
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8724
2021-07-08 19:56:42 -04:00
e895af4ec6
Include arcs in create array. (Thanks to RigoLigoRLC.)
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6491
2021-07-08 18:28:21 +01:00
65c7958293
Coverity issue fixes.
...
Issues #331869 , #331875 , #332203 , #332159 , #332171 , #332180 , and #332648 .
2021-07-08 08:33:08 -04:00
49e6b80fc5
Rollback searchctrl change for FOOTPRINT_VIEWER_FRAME
...
Fixes #8751
2021-07-08 07:26:42 -04:00
a15a91dc00
Turn Footprint Text on when user turn on Value or Ref
...
In the appearance panel the old implementation doesn't turn the meta-
control "Footprint Text" back on when you switch on "Footprint Value/
Reference" while "Footprint Text" is switched off. This is neither
logically correct nor making the elements rendered correctly (value/ref
swicthes would affects corresponding bottom texts, but doesn't affect the
meta-control).
I didn't find a corresponding GitLab issue around, so I'm not saying
"fixes" here.
2021-07-08 03:05:51 +00:00
cafd42911e
Do not use opacity for zone outlines
...
The opacity is intended to aid seeing through
zone filled areas and applying it to outlines
makes them hard to see and select.
2021-07-07 22:04:11 -04:00
edc2be9018
Update width status when user choice changes
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8265
2021-07-07 21:26:21 -04:00
66eb2ddeb5
Remove auto when not needed for line length.
2021-07-07 20:05:50 +01:00
4207165c26
Fix PNS deleting too many segments
...
Don't exit the loop pre-emptively. Need to update lastLink.
2021-07-07 19:54:19 +01:00
cda26bd57b
SHAPE_LINE_CHAIN::NextShape instead of explicitly calculating indices
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8738
2021-07-07 19:46:47 +01:00
7a1e8520ae
Specctra export: Fix incorrect export of holes from mirrored footprints.
...
If a footprint is containing a closed shape on Edges.Cuts it is exported as Hole
(keepout zone). For flipped footprints the hole was incorrect.
Fixes #8753
https://gitlab.com/kicad/code/kicad/issues/8753
2021-07-07 16:40:19 +02:00
17ab2c7197
.kicad_pcb files: minor enhancements: add missing new lines in file.
...
No actual change, this is only a cosmetic change.
2021-07-07 11:44:11 +02:00
9d348d7e6d
Coverity issue fixes.
2021-07-06 13:32:34 -04:00
cd476e1728
Gerber plotter: ensure filled areas using thick outlines have a closed outline.
...
Fixes #8735
https://gitlab.com/kicad/code/kicad/issues/8735
2021-07-06 13:59:05 +02:00
1a23502e98
PAD::TransformShapeWithClearanceToPolygon(): better polygonal shapes:
...
- Oval and round pads ensure at least 16 segments per CIRCLE (like other shapes)
- For ERROR_OUTSIDE option, ensure the aarc approx error is the actual error,
not max allowed error.
These changes can be seen only for a large max allowed approx error, especially
when filling zones.
2021-07-06 10:50:46 +02:00
81fa40d659
Code style: Fix missing space
2021-07-05 20:39:42 +01:00
04ff8cde5e
Drag & Fillet Tracks: Ignore mouse up / click events until move / drag
...
Ensures that any click/mouse up events generated after clicking "OK"
in the "Override locks" dialog are ignored.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8123
2021-07-05 20:29:25 +01:00
ce8132bf4f
Arc Track Drag & Fillet Tracks: Copy lock status to new track(s)
2021-07-05 20:29:25 +01:00
b6e8beb38c
FP_TEXT: account for parent rotation when creating clearance shape
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8728
2021-07-05 13:49:40 -04:00
ea6769b702
The REPORTER interface is inherently line-based.
...
Also fixes a bunch of error messages that were similar but not
identical (which just increases translation burden).
Fixes https://gitlab.com/kicad/code/kicad/issues/8723
2021-07-05 13:41:06 +01:00
a92d337905
Use wxSearchCtrl in the footprint viewer/picker.
2021-07-04 22:06:01 -04:00
67762a11f6
Don't double-process arcs if we get one first
2021-07-04 12:22:52 -04:00
b291f36dae
ADDED: Convert tool can create polygons with arcs from contiguous line and arc segments
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/5409
2021-07-04 12:10:59 -04:00
576d70fab0
Fix file format syntax of arcs in polygons
...
No format bump as there is no way to create these files yet.
2021-07-04 12:10:59 -04:00
0116e9c94e
Silence Altium polygon-needs-at-least-3-verticies warning.
...
Too many Altium files appear to have these. Just ignore them instead.
Fixes https://gitlab.com/kicad/code/kicad/issues/8183
2021-07-04 11:02:59 +01:00
e0146f73b9
PNS: Pick up complete lines between pads when dragging components
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7614
2021-07-03 20:00:54 -04:00
91ea4a0569
PNS: Pick up segments directly between pads when dragging components
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7601
2021-07-03 19:50:04 -04:00
ab38dfd7ae
Fix build
2021-07-03 19:47:58 -04:00
77b68a827c
Remove unused variable
2021-07-03 19:20:54 -04:00
a5308e5f5c
Fix python console toggle to work across pcbnew/eeschema
2021-07-03 22:48:46 +00:00
126cd14715
Fix width setting bug in Net Inspector.
2021-07-03 21:16:15 +01:00
6a0a38ec29
Prevent wxWidgets assertion.
2021-07-03 21:16:15 +01:00
37fac6de35
Use ChangeValue() instead of SetValue() to keep from firing events.
...
Otherwise setting a filter also turns off the Show All Nets checkbox.
Also make sure that config values get saved when they're changed.
2021-07-03 21:16:15 +01:00
4b07a55ef8
Fix net name to net code map to handle sorting and filtering.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8714
2021-07-03 21:16:15 +01:00
3f73d8c2b5
SHAPE_LINE_CHAIN::Area() should always be positive
...
The algorithm relied on the assumption that the points were
ordered anti-clockwise. When ordered in a clockwise fashion, the
result was correct but negative.
Refer to https://www.mathopenref.com/coordpolygonarea2.html
for more information.
2021-07-03 19:37:50 +00:00
c3051ba48a
Refactor SHAPE_LINE_CHAIN to allow two shapes per point
...
m_shapes now has two possible indices. The first one is populated if
the point is associated with an arc and the second index is populated
if the point is shared between two arcs.
2021-07-03 19:37:50 +00:00
4f4deece6d
ADDED support for reading/writing arcs in polys
...
This adds support for reading and writing arc elements in polygons.
2021-07-03 19:37:50 +00:00
252bf76452
Fix off-by-one in AssembleTuningPath
2021-07-03 14:37:52 -04:00
3c59e452d6
PNS: Set tuned path correctly in skew tuner
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8708
2021-07-03 14:06:30 -04:00
1b9893841b
Add a tooltip explaining the track width dropdown
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8719
2021-07-03 13:36:18 -04:00
277bf2b719
Add feedback showing current router state to the message panel
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8265
2021-07-03 13:21:51 -04:00
bc65b7173f
Don't use SCH version number when inspecting PCB files.
2021-07-03 15:24:54 +01:00
3f6811f413
Minor dialog layout improvements.
2021-07-02 11:36:06 -04:00
400f4ae506
Code cleanup.
2021-07-02 15:54:26 +01:00
780a8a5154
Fix another place disallowing internal microvias.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8716
2021-07-02 15:54:26 +01:00
eff75b630f
Get rid of anonymous struct typedefs
...
We are using C++14 where there is no reason for this and is banned in C++20 under P1766R1. MSVC generates a warning under C++14 as a reminder.
2021-07-01 18:28:41 -04:00
c23e39dbe7
Avoid adding invalid text to temporary fp
...
Adding values/references to footprint text is an assertion. This avoids
the assert when copying a full footprint by skipping the extra text
2021-07-01 11:57:29 -07:00
24e54178db
Make sure pin hittest regions don't get too hard to hit.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8616
2021-07-01 15:43:19 +01:00
78d2e88f4b
Beautify export STEP dialog.
2021-07-01 15:43:19 +01:00
740b028180
pns_line_placer: do not constraint the 45deg of current segment in free angle mode.
...
Fixes #8691
https://gitlab.com/kicad/code/kicad/issues/8691
2021-07-01 16:38:31 +02:00
175b474c3e
Coverity issue fixes.
...
Fixes issues #280412 , #314755 , #329615 , #332459 , #332157 , #332167 ,
2021-06-30 18:08:49 -04:00
e9c0920be2
Use a standard SHAPE_POLY_SET hittest for pads.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8705
2021-06-30 22:36:29 +01:00
6810912f09
Refuse to load schematics from the future.
...
Also fixes a bug where an empty window would get left when loading
a file from the KiCad manager window errored out.
Also fixes a bug where we were getting the wrong exception because
we were rethrowing the type-casted one (rather than just calling
throw).
Fixes https://gitlab.com/kicad/code/kicad/issues/8604
2021-06-30 18:32:07 +01:00
5cac8afe1d
Remove long-dead revision support for LIB_IDs.
2021-06-30 13:12:57 +01:00
b1b4caee6a
Escape "naughty" characters in symbol names.
...
It's tempting to say that we don't need to exclude filename chars
from symbols, but we might regret that decision down the road. Better
to just escape them.
Fixes https://gitlab.com/kicad/code/kicad/issues/8694
2021-06-30 13:12:57 +01:00
17737af130
Fix some issues related to SHAPE_ARC:
...
- Some are related to shape errors when the allowed error to approximate circle
by segment is large and arc radius small.
- fix the actual error used in ConvertToPolyline().
- Use SHAPE_ARC::DefaultAccuracyForPCB() instead of a fixed value as extra margin
in zones. It should not change something, because it is also a fixed value
(5 micrometers), but it is not a magic number.
-TransformArcToPolygon() fix some issues and add a new algo, based on the arc actual
outline shape (initial algo is still available in code, just in case).
2021-06-30 13:33:49 +02:00
0d8f0d361e
Allow aligning pads in FP editor when locked
...
Locking is not a concept in the footprint editor. The signature for
checking is slightly different in the alignment tool, so we need to move
the check higher to allow aligning items in fpeditor
2021-06-29 16:48:31 -07:00
Roberto Fernandez Bautista
Ian McInerney
jean-pierre charras
Seth Hillbrand
Jeff Young
Jon Evans
Mike Williams
Marek Roszko
Wayne Stambaugh
Michael Kavanagh
qu1ck
Tomasz Wlostowski
Dominik Sliwa
Stefan
david-beinder
Anton Lazarev
Pradeepa Senanayake
luz paz
RigoLigoRLC