b1018e8eeb
Relax no-zone-commands constraint on interactive placer tools.
...
These tools are initialized with an item (via/pad/microwave) so there's
no way to tell between during-placement and idle. Besides, they don't
update the ratsnest so they probably won't fall afoul of the original bug
(https://gitlab.com/kicad/code/kicad/-/issues/12736 ).
Fixes https://gitlab.com/kicad/code/kicad/issues/13686
2023-01-28 10:42:24 +00:00
52edbf91dc
Better synchronization of various ratsnest visibility controls.
2023-01-27 10:01:12 +03:00
b2f6c13b6a
Fp editor and Fp viewer: fix missing info on msg panel after loading a fp
...
Fix also duplicate/not used code
Fixes #11404
https://gitlab.com/kicad/code/kicad/issues/11404
2023-01-25 17:47:04 +01:00
b8352b07c5
PCB: Immediate mode copy should deselect if hover selecting
2023-01-19 09:45:47 -05:00
f45d44a639
Don't leave temp footprints attached to a board.
2023-01-18 00:46:59 +00:00
f0b2902b8c
Don't allow quit while zone filler is running.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13551
2023-01-16 16:01:45 +00:00
91c5bb9175
Block user-initiated zone-fill actions, but not system ones.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13536
2023-01-15 19:16:36 +00:00
c530bdb5a1
Rename GetSelectMenuText to GetItemDescription
...
This descriptive text is used for many more things than
just the select menu these days.
2023-01-11 22:27:44 -05:00
2cbb66d70d
Dim other pads when in pad edit mode.
2023-01-06 11:13:57 +00:00
1ccd387c8d
Exit a group when selecting a component outside it
...
We had this filter in place when doing mouse selection, but not when
the selection comes from another tool event.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/13398
2023-01-05 20:32:52 -05:00
126225866b
Don't add footprint components to PCB group
...
Footprint components are only group-able inside of the footprint editor
Fixes https://gitlab.com/kicad/code/kicad/issues/13396
2023-01-05 15:38:07 -08:00
7dfa100ff0
Correctly refresh the board after action plugin run and maintain
...
selection
2023-01-05 14:05:15 -08:00
cbe5340d37
Allow pads in multi-select mode when nothing else would be selected.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13371
2023-01-05 17:02:50 +00:00
67e6603699
Move updateUnits functionality to where it can be shared.
...
Also call it when adding a footprint via the chooser.
Fixes https://gitlab.com/kicad/code/kicad/issues/13340
2023-01-02 22:12:26 +00:00
07b4f88e6b
Pcbnew: Fillet Lines tool does not set line width and layer.
...
When fillet a polygon or a rect, the resulting lines and arcs had incorrect
width and layer.
Fixes #13338
https://gitlab.com/kicad/code/kicad/issues/13338
2023-01-02 16:52:08 +01:00
20f2232d4e
Adjust dimension units when placing footprints on board.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13339
2023-01-02 12:39:35 +00:00
e8114dc49a
Minor compil and Coverity warnings fixes.
2023-01-02 10:21:42 +01:00
16fd586c41
Do not prune items/layers when copying the clipboard to the FP editor: all are allowed
...
(Some are disabled only for GUI)
Fixes #13334
https://gitlab.com/kicad/code/kicad/issues/13334
2023-01-01 13:35:05 +01:00
4c63b4e061
Class name <-> file name sync.
2022-12-29 18:05:57 +00:00
4bb1b4a3d2
Router: settings dialog fixes
...
Make keyboard activation of OK save settings instead of cancelling.
Also, fix the string for the shortcut so that it works (shortcut
unchanged).
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/13303
2022-12-29 10:31:12 -05:00
3b55f9e326
PCB Editor: Inform tools when selecting/unselecting net
...
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/13308
2022-12-29 13:46:20 +00:00
411efe6f3d
PCB Editor: Allow mouse drag of group-of-groups
...
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/13076
2022-12-28 15:23:52 -05:00
741d1e043a
PCB Editor: make Mirror menu items conditional
...
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/13230
2022-12-27 14:18:47 -05:00
ee0a41e3bc
Remove excess calls to SelectedItemsModified
...
We really don't want to post these events unless the *selected* items
were actually modified, since it results in a redraw of the properties
panel (which disturbs edit state and causes flicker on MSW).
Now the COMMIT system is responsible for sending this event iff the
commit touches items that are selected.
Side note: UpdateMsgPanel is useless on every app except pl_editor, so
it can probably be refactored/removed at some point.
2022-12-26 20:57:58 -05:00
1f3727f548
Assigning a netclass has no meaning in fp editor.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13267
2022-12-26 20:33:04 +00:00
5dce8323e8
KIGFX::REPAINT is not enough if the item isn't in the view.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11656
Fixes https://gitlab.com/kicad/code/kicad/issues/13217
2022-12-24 17:18:22 +00:00
1cc9792cdb
Fix snapping dist when disabling grid
...
The disable grid hotkey should allow the snap scale to be completely
determined by the snapSize and world scale. This prevents snapRange
from overriding in the case where grid is disabled.
Additionally, we disallow grid snapping when the grid scale is not
visible. This means that when zoomed out sufficiently to not show the
minor ticks, these minor ticks will not override a snap
Fixes https://gitlab.com/kicad/code/kicad/issues/12303
2022-12-21 17:47:45 -08:00
47dc2379d8
PCB: Fix issues with grab unconnected
...
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/13232
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/13233
2022-12-21 15:10:19 -05:00
75053cfc57
Remove normally unused code from Move function.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13222
2022-12-21 19:06:32 +03:00
5d94d2634e
PCB Editor: make locking menu items conditional
...
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/5202
2022-12-21 10:34:54 -05:00
44ab6876d9
fp editor: remove useless "Unroute Selected" from context menu.
...
Fixes #13229
https://gitlab.com/kicad/code/kicad/issues/13229
2022-12-21 13:11:51 +01:00
bd24e85289
PCB: Add Copy With Reference to the Positioning Menu
...
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/11947
2022-12-20 11:54:05 -05:00
5327ea5823
Respect selectabiltiy when adding wholy-selected groups.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13092
2022-12-15 17:57:58 +00:00
279edcefdc
Don't break tracks without snap
...
If the user asks to not snap to a track, we should also prevent the
track from snapping to the via
Fixes https://gitlab.com/kicad/code/kicad/issues/13142
2022-12-14 13:51:42 -08:00
9d13e419c2
Reduce compiler warnings.
2022-12-13 00:47:19 +00:00
4fe35d0df1
More push/pop tool issues
...
We need to pop the move tool off when it doesn't find anything to act on
so that the pushed tools under it on the stack can re-activate
Fixes https://gitlab.com/kicad/code/kicad/issues/13114
2022-12-12 12:56:35 -08:00
96a9ec4a0c
Enhance compatibility with V6.0 for Intersheetrefs fields associated to GLOBAL labels.
...
In V6.0, the identifier is "Intersheet References" and was not immediately
seen as Intersheetrefs field.
2022-12-12 16:38:04 +01:00
45eae3e594
Don't Simplify() polys with arcs in them.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13134
2022-12-12 12:54:34 +00:00
5e8227b54a
pcbnew: Support dragging arc center in "Keep endpoints" mode.
2022-12-12 13:00:44 +03:00
3eb31befed
Fix a delay when dragging arc endpoints in pcbnew.
2022-12-12 09:39:56 +03:00
da1e5a80a8
Restore removeCorner transition in PCB editor.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13133
2022-12-12 07:04:20 +03:00
b01d950071
Remove start pt when collinear with neighboring pts in zone/poly draw.
2022-12-10 06:21:54 +03:00
b4b25a7009
Fix Pack & Move footprints when working with groups.
2022-12-09 20:42:35 +03:00
c1f82d0c80
Canceling Move cancels Pack too in Pack & Move footprints.
2022-12-09 20:41:56 +03:00
3d2b1aaf90
Improve H/V/45 deg mode when drawing zones and polygons.
2022-12-09 19:11:56 +03:00
0e75bf02fa
Selection: refactor modifier checking
2022-12-08 14:12:12 -05:00
6d513e7ecf
Expose changing arc edit mode in arc button context menu and Preferences
...
Ctrl+Space can still be used to cycle through modes.
Fixes https://gitlab.com/kicad/code/kicad/issues/5412
2022-12-05 21:28:16 +03:00
ef83d01455
Minor string changes: "eeschema" / "pcbnew" in tooltips, and power port terminology
2022-12-04 14:29:57 +00:00
96819f6c01
Better cache invalidation for text objects with references.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13059
2022-12-04 11:51:44 +00:00
0bc06d506c
Properties: reselect after canceled move
2022-12-02 21:40:21 -05:00
93c631af44
drawing_stackup_table_tool: fix incorrect color of dielectric sublayers.
...
when a dielectric has sublayers, the printed color was always the main layer color.
2022-12-02 10:41:20 +01:00
20791c99ac
Allow conversion of single track segments and vias.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13047
2022-12-01 17:15:29 +00:00
6befa1c57e
A bit of cleanup to recent convert tool changes.
2022-12-01 14:53:13 +00:00
4d8e73a630
Allow tracks as input to bounding hull generation.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13047
2022-12-01 14:53:13 +00:00
b31349b679
Get consistent point for gfx import
...
TopLeftItem() should always return same element for our import
Fixes https://gitlab.com/kicad/code/kicad/issues/13041
2022-11-30 12:25:34 -08:00
cf33f33899
Standardize placement tool modifiers
...
PlaceImage, PlaceImportedGraphics and PlaceText need to handle the grid
and hotpoint snapping as well as the modifiers to disable them
2022-11-30 10:57:42 -08:00
3c4c4e5166
Remove shortened debug time from zone refill message.
...
Also adds a time-out for it.
2022-11-30 17:38:02 +00:00
074c087c21
Allow disabling of grid snapping while placing imported image.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13040
2022-11-30 14:38:22 +00:00
98ab078905
Remember conversion strategy.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13043
2022-11-30 14:29:16 +00:00
17bb57cc73
PCB: fix stale ratsnest between moves in Move Individually
2022-11-30 09:11:37 -05:00
8dbd6fee00
Go back to smaller chaining epsilon.
...
Using a large epsilon here to allow for sloppy drawing can cause
the algorithm to miss very short segments in a converted bezier.
So use an epsilon only large enough to cover for rouding errors in
the conversion.
Fixes https://gitlab.com/kicad/code/kicad/issues/12951
2022-11-30 13:26:45 +00:00
19eab62516
More safety around ratsnest state.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13011
2022-11-30 13:00:21 +00:00
9fa8b9e49f
Fix memory leak and re-code non-memory-leak so Coverity can understand it.
2022-11-30 13:00:20 +00:00
8c468dcffc
Use ecoords for distance comparison in PCB grid helper.
...
Fixes a bug where a cursor would jump to a far location while hovering
over some 45-degree tracks.
2022-11-30 08:18:19 +03:00
41ca2789a6
Get rid of shadowing warning
2022-11-29 18:12:39 -05:00
abd818a426
Update msgpanel after entering or exiting group.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13031
2022-11-29 21:33:04 +00:00
31eb91e9e5
Infobar for slow zone auto-refill.
2022-11-29 21:09:16 +00:00
b6bd74d822
Replace single zone fill under "draft" terminology.
...
Also sets Autofill Zones to default to on.
2022-11-29 18:13:36 +00:00
ad6ef35c9f
PCB: Add skip action to Move Individually
2022-11-29 15:42:03 +00:00
b2177718a1
Tighten up refresh logic for net & netclass references.
...
Also tightens it up a bit for text variables which can reference things
like netnames and netclasses, but also board settings.
Fixes https://gitlab.com/kicad/code/kicad/issues/13032
2022-11-29 15:18:36 +00:00
8165fc6c44
Give up trying to infer what kind of polygon the user wants.
...
In many instances there are 3 valid answers: mimic linewidths, use
centerlines, and build a bounding hull.
Fixes https://gitlab.com/kicad/code/kicad/issues/12950
2022-11-28 22:12:53 +00:00
4a4fab78a3
PCB: allow swap while moving
2022-11-28 14:16:08 -05:00
3042633f4a
PCB: block unroute and move individually when already moving
2022-11-28 14:16:08 -05:00
64f315c649
Move properties panel to widgets with the other AUI panels
2022-11-27 22:40:23 -05:00
ec9c6a8053
Separate creation of polygons for open and closed shapes.
...
This allows us to create a bounding hull from an open shape-line-chain,
which is useful for defining milled slots.
2022-11-27 18:29:41 +00:00
8c7691fbc3
Harmonize on "Manager" for now, since we use that in the docs
2022-11-25 09:13:23 -05:00
bbea5b3fbc
Save and restore properties and search panel sizes
2022-11-25 09:11:30 -05:00
47d86e5d9e
Don't crash when canceling graphics import
...
Grouped graphics need to have their group removed from the preview
before deleting the elements to avoid reading freed memory when
redrawing
2022-11-23 16:21:06 -08:00
8b1ffca7fa
Better reporting of nets and netclasses.
2022-11-22 14:54:08 +00:00
97fd99ec99
Re-resolve netclasses after assigning netclass to pattern.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12965
2022-11-22 14:54:08 +00:00
226529235c
Mostly const safety, but also performance opt. by avoiding shared_ptr overhead.
2022-11-22 12:21:30 +00:00
3b31955d98
Get hit test in group members
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12957
2022-11-21 09:28:49 -08:00
01138a2e19
Fix fillet action for lines
...
Generalize fillet action behavior to all straight lines in pcbnew
Fixes https://gitlab.com/kicad/code/kicad/issues/4742
2022-11-21 07:01:14 -08:00
c1510f07d8
Fix some issues with group bounding boxes.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12958
2022-11-20 23:57:36 +00:00
0120df014e
Give group the right parent when pasting.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12954
2022-11-20 22:52:06 +00:00
12a55f20d3
Fix a mistake in grip margin.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12952
2022-11-21 00:25:19 +05:00
dd2f19ca5f
Allow router cursor snapping to points on the arc.
...
Also don't disable grid snapping when holding Shift over arcs.
2022-11-20 16:56:25 +05:00
110bc6abd1
Fix router cursor glitching on H/V track segments.
...
Also don't disable grid snapping when holding Shift over tracks.
2022-11-20 16:56:25 +05:00
38fd1c9985
pcbnew: Improve performance when something is selected.
2022-11-19 01:53:30 +05:00
c409646aad
Update message panel after rebuilding connectivity.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10122
2022-11-18 15:29:16 +00:00
bba6d503d4
Don't keep value of user or grid anchors between invocations.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12065
2022-11-17 00:51:52 +00:00
cefc5268ab
Allow pads in selection and filter them for free-pads later.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12912
2022-11-16 18:37:40 +00:00
9724f6e736
Don't allow zone filling during other editing operations.
...
It's a very heavy op, and is likely to violate all manner of
assumptions the other ops make.
Fixes https://gitlab.com/kicad/code/kicad/issues/12736
2022-11-14 23:39:49 +00:00
f51db4e093
Fix some Coverity and compil warnings.
2022-11-14 09:02:40 +01:00
9d8fdd8d53
Fire selection events from SelectAll().
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12896
2022-11-13 22:59:21 +00:00
7089e99f4b
Integrate move individually into move algo so other commands don't choke.
...
Also adds commands to cancel and finish move individually.
Fixes https://gitlab.com/kicad/code/kicad/issues/12750
Fixes https://gitlab.com/kicad/code/kicad/issues/12749
2022-11-13 13:18:42 +00:00
248181e62d
Fix Coverity and compil warnings.
2022-11-12 16:02:24 +01:00
d9987e9569
Orig_items will have been invalidated by Revert.
...
Don't use it to rebuild the selection. Use the board_item flags instead.
Fixes https://gitlab.com/kicad/code/kicad/issues/12882
2022-11-11 22:57:38 +00:00
138f835672
Retire group bbox cache.
...
It's too hard to maintain when changes to other items (the groups
members) affect it.
2022-11-11 20:31:31 +00:00
3fc727bb91
Clear selection before deleting objects during conversion.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12879
2022-11-11 17:53:01 +00:00
03ba14c6d3
Tighten lifecycle management of parent group pointers.
...
Also adds some debugging to try to catch dangling pointers.
Also adds a cache for group bounding boxes (which will be expensive
to calculate for large groups).
Fixes https://gitlab.com/kicad/code/kicad/issues/12875
2022-11-11 17:27:28 +00:00
0b4fc8f50d
Fix bugs in PCB arc editing.
2022-11-11 15:00:36 +05:00
46d4861187
Use the 45-degree limit button to apply alternative constraint.
2022-11-11 15:00:36 +05:00
8b0f3f1ee7
Set keeping the center as the default arc editing mode.
2022-11-11 15:00:36 +05:00
3f63f9fc57
Don't prune inner layers of through-hole parts.
...
For historical reasons we've always included ALL inner layers in these
items and changing that has uncovered several latent bugs. Rather
than find all the rest this late in the game, I went back to storing
all inner layers, even those the board doesn't currently have.
Fixes https://gitlab.com/kicad/code/kicad/issues/12863
2022-11-09 15:58:14 +00:00
4066850f37
Use event point to determine if we're still in draggable item.
2022-11-09 13:09:01 +00:00
056f45cd70
Fixup most intersecting polygon points
...
Remaining is the intersecting complex pad, so this keeps the error
message when drawing
Fixes https://gitlab.com/kicad/code/kicad/issues/12806
2022-11-08 16:05:04 -08:00
2cfe78170c
Honour selection filter when picking move anchors.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12773
2022-11-08 16:27:18 +00:00
cb3d215b6a
Fix compil and Coverity warnings.
2022-11-08 11:53:13 +01:00
be8bbcaac3
Send Selected event even if the result is an empty selection.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12849
2022-11-07 19:47:51 +00:00
b5f62da5d9
Respect synthetic layer visibility when selecting footprint texts.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12850
2022-11-07 19:26:14 +00:00
ae741b93e6
Resore push/pop-less PickerTool.
...
(Functionality was accidentallly lost when we removed the opt command
strings.)
2022-11-07 19:11:12 +00:00
0b3ecdd968
Revert "Fix handling of self-intersecting polygons"
...
This reverts commit ed309e20da
2022-11-07 09:41:56 +00:00
dd94b2d3a7
Rename PROPERTIES to STRING_UTF8_MAP for clarity
...
This class has nothing to do with the properties system
2022-11-06 11:51:52 -05:00
bb618f2d55
Update pointEditor after cancelled move.
2022-11-05 16:50:54 +00:00
8bc9d456c3
Fix area selection calculation
...
area was a double value for comparison of large numbers. But the
promotion from int happened after the multiplication (and overflow) for
large images
Fixes https://gitlab.com/kicad/code/kicad/issues/12821
2022-11-03 11:46:40 -07:00
ed309e20da
Fix handling of self-intersecting polygons
...
We allow temporary self-intersection but before committing, we reduce
the polygon to a single outline (optionally with holes)
Fixes https://gitlab.com/kicad/code/kicad/issues/12806
2022-11-01 13:09:11 -07:00
c7c4439027
Allow bezier->line/poly conversion
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12778
2022-10-31 12:48:53 -07:00
3b3e6de515
Disable mirror commands when a single footprint is selected.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12752
2022-10-28 19:20:24 +01:00
6a0db3e7e2
Fix Coverity warnings.
2022-10-26 14:39:44 -04:00
960c92634f
Improve logic of Position Relative tool
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/12672
(cherry picked from commit 2d2912c23d
2022-10-24 18:47:38 -04:00
d16b23d16e
Name shortening and line-break reduction.
2022-10-21 18:41:39 +01:00
e3842514e7
Move courtyard collision setting to preferences.
...
Also cleans up PCBNew/FPEditor edit options panel to be more in sync
with each other.
2022-10-19 11:33:11 +01:00
403cc50e7c
Don't exit group when the cancel went to another tool.
...
Also fixes a bug where the group border didn't get updated immediately
on enter/exit.
Fixes https://gitlab.com/kicad/code/kicad/issues/12669
2022-10-18 17:53:06 +01:00
4633d251a5
Remove single-zone-fill and unfill.
...
These are incompatible with our zone-priority-based algorithms.
2022-10-18 13:45:28 +01:00
598b09821a
Coverity fixes.
2022-10-17 15:30:20 -04:00
46752499df
We need both a tool-oriented delete and one that doesn't push/pop, etc.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12600
2022-10-17 13:21:07 +01:00
e9f8454a67
No DRC engine in footprint editor.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12658
2022-10-16 18:39:37 +01:00
4af98827fd
Revert change for 11299, and update removed-pad items after zone fills.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12645
2022-10-15 16:06:57 +01:00
697056fa7e
Correctly sort positions for default align
...
When not aligning under mouse cursor, choose the X-most element where X
is top/bottom/left/right. Previous sorting was not correct for two
directions
Fixes https://gitlab.com/kicad/code/kicad/issues/12627
2022-10-14 16:15:06 -07:00
de5980b92e
Share more of the courtyard collision highlighting code.
2022-10-14 10:42:07 +01:00
11dc5424cb
Pull interactive courtyard checker out of move tool to share with router.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12594
2022-10-14 00:48:37 +01:00
8f1b4a9c03
Include cleanup.
2022-10-13 23:15:41 +01:00
8b9cbd5805
Don't reset editPad if it still exists after model reset.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12630
2022-10-13 00:07:30 +01:00
d0d625dcb5
BOARD_INSPECTION_TOOL::LocalRatsnestTool(): set a suitable cursor when activated.
2022-10-12 15:56:41 +02:00
83310659fd
Basic geometry: R != D.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12601
2022-10-10 19:18:37 +01:00
8470b178cd
Use actual pad shapes or built outline instead of effective shpaes for anchors.
...
The effective shapes don't work very well in the custom pad or rounded
rectangle cases, and they're somewhat slower in some of the other cases.
Fixes https://gitlab.com/kicad/code/kicad/issues/12601
2022-10-10 18:11:32 +01:00
79dabdd484
Fix typo.
2022-10-07 23:52:47 +01:00
04fec5016b
Add keepout zones set to keepout footprints to footprint courtyard checker.
...
(This is for the move tool, not DRC. DRC uses more sophisticated keepout
processing which is too slow for the move tool, and doesn't let us know which
keepout area collided for collision highlighting.)
Fixes https://gitlab.com/kicad/code/kicad/issues/12594
2022-10-07 22:23:37 +01:00
165654f114
Expose Switch Arc Posture in context menu.
2022-10-07 08:28:13 +03:00
d26b59a0bf
Improve arc construction using angles from arc geometry manager.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11713
2022-10-07 06:51:00 +03:00
22917860ef
Move Enter Group for easier access.
2022-10-07 03:03:33 +03:00
f818f3a445
Fix footprint rule and zone area anchors
...
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/12575
2022-10-06 15:29:18 +00:00
436d75e7f9
Try to reconcile SELECTION and BRIGHTENED use of overlay.
...
For some reason the overlay doesn't get redrawn during the PCBNew
selection disambiguation menu, so we need to not hide BRIGHTENED
items.
Fixes https://gitlab.com/kicad/code/kicad/issues/12547
2022-10-04 17:01:56 +01:00
524a43f95e
Don't select footprints on the wrong side if not visible.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12483
2022-10-04 13:22:06 +01:00
ba630971af
Possible fix for move/esc/esc crash.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12553
2022-09-30 23:05:55 +01:00
6a6ef9b1f4
Bring adding-to-group and hiding in sync.
2022-09-30 16:45:00 +01:00
c1da59b560
Swap: disallow swapping tracks / wires
...
Also fix missed shortcut change for S -> Shift-S
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/12538
2022-09-29 17:04:43 -04:00
d67437a2aa
Move ratsnest exclusion processing to a post-pass.
...
Also fixes a few cases where we were unnecessarily rebuilding
connectivity more than once for an operation.
2022-09-29 17:08:49 +01:00
9894acea76
Spelling
2022-09-28 17:09:43 -07:00
4095172259
ADDED: Pack and Move Footprints, improved footprint spread algorithm.
2022-09-28 13:37:23 +00:00
3a7068b346
Iterate on a copy of the selection since we're going to delete from it.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12484
2022-09-27 23:54:19 +01:00
700edb95e3
PCB Actions: Grab Unconnected
...
Grabs the nearest unconnected item for each selected footprint/pad.
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/1986
2022-09-26 16:17:41 -04:00
f4a3062684
PCB: Select Unconnected
...
Selects the all unconnected items for each selected routable item.
2022-09-26 16:17:41 -04:00
e66393c4dd
PCB Tools: Move Individually
...
Allows moving a selection of components one by one.
2022-09-26 16:17:41 -04:00
2490ad1458
Fix search panel not remembering visibility
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/12494
2022-09-25 11:56:41 -04:00
59d62f7df1
Untangle some includes
2022-09-25 11:37:06 -04:00
7e71dc084c
Implement Mirror H/V for tracks and vias.
...
While not that often useful, it's really annoying that it doesn't work
when you *do* find a use-case for it.
Fixes https://gitlab.com/kicad/code/kicad/issues/6853
2022-09-24 19:55:48 +01:00
328cc27020
Add pad-recombining to FPEditor's Cleanup Graphics.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12487
2022-09-24 19:34:06 +01:00
28f836ab5c
Fix overzealous string replacement
2022-09-23 10:56:58 +02:00
897135a4f0
Support mirroring on the board too.
...
Also fixes a few bugs in FP item mirroring.
Fixes https://gitlab.com/kicad/code/kicad/issues/2168
2022-09-22 15:05:58 +01:00
8eb68ee472
Add pin/unpin context menu to Symbol Chooser and Footprint Chooser.
...
Also moves some more code down into common so it can be shared.
Fixes https://gitlab.com/kicad/code/kicad/issues/12384
2022-09-21 14:45:12 +01:00
513fc872bb
Support both X and Y mirroring in FPEditor.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12409
2022-09-21 00:16:27 +01:00
0150655ed3
Fix missing DRC check with via
...
When the via is first and not second in our ordering, the hole-copper
clearance was not checked as the track did not have a hole.
We also calculated the NPTH-via clearance incorrectly in the inspector
2022-09-20 13:43:01 -07:00
64a6fc0fd4
Push UNITS_PROVIDER down into a low-level mixin.
...
This allows us to also construct cheap UNIT_PROVIDERs for specific
tasks when necessary.
2022-09-19 17:10:59 +01:00
5990595619
When adding a bitmap, do not clone it during moving.
...
Cloning is not necessary, and is memory consuming.
2022-09-19 17:41:47 +02:00
ca0c9f12e0
PCB Editor: Unroute Footprint
...
Also works on selected pads.
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/1955
2022-09-19 10:37:10 -04:00
9304607624
TOOL_EVENT: make command string non-optional
...
We're getting segfaults in places where this isn't checked. Also, add
some asserts so we can catch bad tool push/pop.
Removes all uses of GetCommandStr() and makes it private.
2022-09-19 10:23:09 -04:00
45d6b4a9fc
Readability improvements.
2022-09-19 11:18:20 +01:00
1566bd8b14
Make sure a collector has a guide before handing it to a client filter.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12460
2022-09-18 18:14:47 +01:00
3d5913c825
Remove convert_to_biu.h, merge contents to base_units.h
2022-09-16 21:09:28 -04:00
66e8931405
Remove IU_PER_MM thats standalone
2022-09-16 21:09:27 -04:00
e6ed275c25
Repoint IU_PER_MILS
2022-09-16 21:09:26 -04:00
a8613ee80f
Combine Iu2Millimeter & remove PcbMm2iu
2022-09-16 21:09:26 -04:00
107f409106
Use router's connectivity algorithm, not CONNECTIVITY_DATA's.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10745
2022-09-16 22:49:20 +01:00
d9f75556bd
Fix old copy/paste error (from 2017, believe it or not).
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11487
2022-09-16 11:25:27 +01:00
b00178adb3
Nuke base_units from orbit
2022-09-16 04:38:10 +00:00
ce9adeaf51
Don't set FreeVia when we can't find a net.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12421
2022-09-15 23:16:08 +01:00
0180bcf90a
ADDED: Implement Drag and Drop
...
dropping files to Kicad manager :
*.kicad_pro, *.pro -> open project;
gerber and job files -> open in Gerbview editor;
Eagle and Cadstar files -> open project.
dropping file to schematic editor -> append schematic;
dropping library file to Symbol editor -> add library;
dropping board file to PCB editor -> append board;
dropping library or footprint file to Footprint editor -> add library or import footprint;
dropping ZIP file or gerber files to Gerbview editor -> open files;
dropping sheet file to Drawing Sheet editor -> open sheet.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/11638
2022-09-14 22:28:09 +00:00
2d3b8d6393
Fix logic around Select All inside an entered group.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12411
2022-09-14 12:24:51 +01:00
281b9d405a
ADDED ability to specify where pad number (& net name) go on custom shaped pads.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6627
2022-09-14 11:37:20 +01:00
f91487aa36
Don't overwrite titleblock and pageinfo when appending board.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11650
2022-09-14 11:37:20 +01:00
f304e2d4f6
ADDED: Search/inspect pane
2022-09-14 02:59:57 +00:00
1a023f5dd0
PCB Editor: (Auto)Route Selected (From Other End)
...
3x Selection-Based Routing Tools. Takes a selection of routable objects
and routes them one at a time individually, with an attempted finish, or
from the other end, depending on the action given.
2022-09-13 15:06:36 +00:00
0a5ca5b485
Display crosshairs in picker tools.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10183
2022-09-13 01:40:43 +01:00
c2643f53cf
Tighter control over lambda capture.
2022-09-12 20:51:15 +01:00
eaccd40c75
Allow vias to connect <no net> tracks even when DRC checking is on.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12403
2022-09-12 20:38:21 +01:00
37d2addf0e
Icons: add swap
2022-09-12 11:11:49 -04:00
f70e1d0f22
SCH/PCB: Set Swap hotkey to 'S'
...
* Move Add Sheet to Shift+S in Schematic Editor
* Move Set Grid Origin to Shift+S in PCB Editor
2022-09-12 11:11:49 -04:00
de6e368ac6
PCB: Swap Tool
2022-09-12 09:39:43 -04:00
9cf3c529d3
Apply the same accuracy band to connectivity as we use for hittesting.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10745
2022-09-09 21:42:21 +01:00
5b3bd9be83
Prune pasted data of non-enabled layers.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11997
2022-09-09 21:02:08 +01:00
98e760da93
Coverity-suggested improvements.
2022-09-09 13:41:13 +01:00
2743fd583f
More improvements to drag tool selection disambiguation.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10745
2022-09-08 23:43:07 +01:00
a619ef9d53
Improve drop-a-knee-selection-to-a-single-segment algorithm.
...
In particular, don't rely on there being only two items in the
collector at the start.
Fixes https://gitlab.com/kicad/code/kicad/issues/10745
2022-09-08 14:10:18 +01:00
6b3d36b6c3
CONVERT_TOOL: also show the "Create From Selection" menu if a array can be created
...
The "Create Array" sub-menu was recently moved to this menu, so it must me
shown as soon as an array can be created.
2022-09-07 10:53:27 +02:00
d67c81a657
When deselecting items, pick only selected ones.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10292
2022-09-06 19:44:29 +00:00
963a17f5b5
fix a compil warning
2022-09-05 18:33:17 +02:00
895a8a8dbc
Work around focus issues for status popups.
...
Autoscroll wasn't working on Mac because the status popup's panel
has the focus. This *may* also fix a problem on MSW of the auto-scroll
not being cancel-able.
Fixes https://gitlab.com/kicad/code/kicad/issues/11425
2022-09-04 21:08:01 +01:00
efae2bbb4c
Better feedback for netclass assignment patterns.
2022-09-03 21:33:56 +01:00
c30a557810
ADDED netclass assignment from PCB canvas.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/5975
2022-09-03 19:29:59 +01:00
09773e3e2e
Make sure dirty flag gets set, and leave save enabled regardless.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11824
2022-09-01 14:27:16 +01:00
9188838e50
RIP EDA_RECT.
2022-08-31 23:57:24 +01:00
b4492e0bd2
More EDA_RECE yeetage.
2022-08-31 17:19:50 +01:00
ebe9617e77
More EDA_RECT expungification, and an attempt to fix the python test.
2022-08-31 17:19:48 +01:00
5679b9dbdc
Remove a few EDA_RECT instances.
2022-08-31 01:22:49 +01:00
0c8787cbb9
Some more wxPoint/EDA_RECT yeeting.
2022-08-31 00:44:33 +01:00
b736460e71
Move optional access from value() to *operator
...
`value()` throws. Where we check for existence, we don't need to use
the throwing version and should just use the unprotected variant
2022-08-30 13:59:39 -07:00
a176bf383e
Properties: pick up single selections
...
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/12302
2022-08-30 13:59:37 -04:00
91fbb5c957
Don't prevent immediate actions while router active
...
Immediate actions that can take place are useful. We should only be
preventing immediate actions while actively routing or dragging
Fixes https://gitlab.com/kicad/code/kicad/issues/12311
2022-08-30 10:31:29 -07:00
63386ba64d
Pointer safety for ERC/DRC dialogs.
...
Also makes the "Edit ingored violations" easier to find.
Fixes https://gitlab.com/kicad/code/kicad/issues/12308
2022-08-30 12:07:19 +01:00
2d68cdff94
Better reporting of hole-to-hole clearances and clearance resolutions.
2022-08-29 17:37:49 +01:00
b886ec728e
Copy shape data when converting PCB TEXTBOX to FP.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12298
2022-08-28 21:34:13 +01:00
3b4c5f0dc4
French translation update
2022-08-27 09:10:02 +02:00
09511d176c
Quiet Coverity.
2022-08-26 17:05:25 +01:00
06786c34d7
Blacklist hashes for 2d integer elements
...
The hash table for integer hashes is extremely limited and places most
elements in the same buckets. This leads to a linear search time for
structures built on this.
This blocks hashes, directing the coder to utilize std::set or std::map
structures instead of hash tables for implementing integer-based
lookups.
2022-08-26 08:43:37 -07:00
f1261e71d4
Replace boost::optional with std::optional
2022-08-25 15:50:47 -07:00
fb74bdb059
Don't consider rule area zones in priority calc
2022-08-25 10:12:58 -07:00
e661545ecf
Choose the first unused priority value for zones
...
Default the new zone priority value to the lowest available unused
priority. Ensures that, by default, a new zone has a unique priority
level preventing zones from unintenionally shorting
2022-08-25 10:05:30 -07:00
418df36790
Avoid teardrops in priority calculation
...
When choosing a new priority value, don't look at teardrops (which have
high priority)
2022-08-25 08:41:14 -07:00
3e4cfab254
Set new zone priority to unique number
...
Previously new zones' priorities were all set to 0. This is almost
always wrong and can lead to unintended conflicts. The new zone default
value is now set to one higher than the largest number on the board.
This is a better default value because it will not conflict with
existing values.
2022-08-24 16:37:57 -07:00
1871812f2b
Consolidate on a more widely used sub-type architecture.
2022-08-23 12:57:55 +01:00
f6f6ebd5f9
WIP: Properties GUI
2022-08-22 21:32:32 -04:00
1e68c353f1
Account for groups in undo of Position Relative To.
...
Also fixes a bug were pads weren't correctly being found for anchoring
the selection before the Position Relative To.
Fixes https://gitlab.com/kicad/code/kicad/issues/11793
2022-08-22 22:33:38 +01:00
3a76d42630
Cross-probing/selection for multiple items (PCB -> SCH)
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10469
2022-08-22 19:33:39 +00:00
03454684fa
Commenting.
2022-08-22 12:43:57 +01:00
4f0136db3b
Attempt to fix std::initializer_list lifetime issue.
2022-08-21 20:54:41 +01:00
28f7221cc3
Allow selection of Footprint Checker markers.
...
(And do a cross-probe to the Footprint Checker dialog.)
2022-08-20 11:30:25 +01:00
aa2ad3b44c
Move KICAD_T[] to std::initializer_list<KICAD_T>.
2022-08-20 10:28:11 +01:00
46df421064
ADDED defined pad groups for net-tie footprints
...
Each pad group is allowed to short nets with other pads in its group.
Legacy footprints with the "net tie" keyword hack will get a single
group auto-created with all the footprint's pads in it.
DRC and the router now allow a track to collide with copper graphic items
while entering a net-tie pad as long as the closest point in the collision
is within the pad.
DRC (and the footprint checker) now check for copper items in the
footprint shorting pads which are not in the same pad group.
Fixes https://gitlab.com/kicad/code/kicad/issues/2265
2022-08-19 18:54:20 +01:00
a60053c800
selectAllItemsOnSheet(): fix a typo that prevent selection of items in root sheet.
2022-08-19 11:12:16 +02:00
e0fbe2542f
Fix a few compil and Coverity warnings.
2022-08-19 10:53:29 +02:00
f06e28b7a7
PCB: Finish Route, Route From End
...
Adds restart routing from other ratsnest' end and automatically finish
routing.
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/5051
2022-08-17 03:15:46 +00:00
371f6d917f
Use VECTOR2I::extended_type instead of long, and int for numeric limits.
2022-08-16 12:08:55 +00:00
405be8d15f
Bounds-awareness in Move, Rotate, point editor, drawing tool
2022-08-16 12:08:55 +00:00
b81a3f0533
GetClampedCoords: Better usability for rounding
2022-08-16 12:08:55 +00:00
4d7d367b25
Use KiROUND for BBox calculation, change parameter name, block negative padding.
2022-08-16 12:08:55 +00:00
759e1a64ef
Fix broken const ref in wildcard
2022-08-15 12:09:30 -07:00
35ac39844f
Clean up some auto usage
...
Don't make new copies of shared_ptr if we can use references. Keep auto
usage down to hard-to-type-out sequences
2022-08-15 11:29:45 -07:00
1f347582f8
Introduce new marker type so we can track DRC errors on the drawing sheet.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12221
2022-08-15 18:03:03 +01:00
a9536b5de9
CHANGED netclass assignments now done via canvas or via patterns.
2022-08-14 22:56:29 +01:00
d6cd55e133
ADDED esc-removes-net-highlight preference to PCBEditor.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8760
2022-08-09 08:46:12 +01:00
ea914eac9a
Pcbnew: fix regression: Display board info when clicking on a empty place.
...
Previously: the displayed info was "Selected Items 0".
2022-08-05 13:49:01 +02:00
96f01d33c8
Performance improvements.
...
1) Move a bunch of std::map's to std::unordered_map to get constant-time
look-ups
2) Lengthen progress-reporting intervals to spend more time doing work
and less time talking about it
3) Reverse order of SHAPE_LINE_CHAINs in thermal intersection checks to
make (much) better use of bbox caches
4) Don't re-generate bboxes we already have
5) Fix some autos that weren't by reference (and were therefore copying
large datasets)
6) Rename delta progressDelta so it's easier to search for in future
7) Get rid of a few more autos (because I don't like them)
8) Pass large items to lambdas by reference
Fixes https://gitlab.com/kicad/code/kicad/issues/12130
2022-08-03 11:59:42 +01:00
43df863df2
Fix issue with caches not being initialized when printing msg bar.
2022-08-01 13:09:51 +01:00
0304ad4494
Move connection width testing to rule system.
...
Also copies connection width progress reporting architecture over to
the sliver checker.
2022-08-01 13:09:51 +01:00
927bc8141b
Init member variables.
2022-08-01 13:09:51 +01:00
54213bb7f1
Cleanup and move to DRC_ENGINE's status reporter.
...
1) brace formatting
2) get rid of some autos
3) get rid of a dyn_cast that CLion claims is bad
4) use DRC_ENGINE's status reporter
2022-08-01 13:09:51 +01:00
6f49b57f9b
Cleanup & performance enhancements.
2022-08-01 13:09:51 +01:00
a8505d9c76
SEARCH_RESULT -> INSPECT_RESULT
...
To fix the name squatting it's doing for future functionality
2022-07-29 20:01:10 -04:00
f0b9e67212
Add ignore-line-widths mode to CONVERT_TOOL.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/5911
2022-07-29 21:39:03 +01:00
fc1afa6298
Improvements to convert tool.
...
1) Handle filled shapes
2) If a chained outline can't be found, build hulls of the individual
segments
3) Combine intersecting shapes
4) Simplify code
Fixes https://gitlab.com/kicad/code/kicad/issues/git
Fixes https://gitlab.com/kicad/code/kicad/issues/5911
2022-07-27 18:57:45 +01:00
2bf33321d1
Update constraint mode in status bar during move.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10465
2022-07-27 18:57:45 +01:00
aabc3b3cc6
FP editor: fix crash when duplicating a footprint.
...
Fixes #12098
https://gitlab.com/kicad/code/kicad/issues/12098
2022-07-27 19:08:27 +02:00
cb6a2552d9
Use the FPEditor's status bar messages for FPBrowser.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11404
2022-07-26 18:45:02 +01:00
4d48376eae
Fix some warnings detected by PVS-STUDIO (not used vars)
2022-07-26 16:00:14 +02:00
1bad72f14f
Remove bad static_cast.
...
(m_settings isn't a PCBNEW_SETTINGS in non-PCB_EDIT_FRAMEs)
2022-07-24 23:41:41 +01:00
c16d0603c6
Add fix missing in my commit 8eee7667
2022-07-24 09:10:51 +02:00
8eee766791
Fix Cvpcb DISPLAY_FOOTPRINTS_FRAME: some display options not working. Commit 5e4a7041 moved 4 settings used in Cvpcb to a PCBNEW_SETTINGS struct. But in Cvpcb, this config struct does not exist. So these 4 settings are now moved to a section (PCB_VIEWERS_SETTINGS_BASE) common to Cvpcb and Pcbnew config.
2022-07-23 18:45:13 +02:00
9dd3bbf2cb
Change highlight net hotkey default.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12051
2022-07-23 12:34:48 +01:00
f41af10007
Clean up hole shapes for safety (smart pointer) and consistency.
2022-07-22 23:06:07 +01:00
5442d284f4
Improve strings for highlight net commands.
2022-07-22 09:31:11 +01:00
def87c969e
Redo the pinned-libraries storage architecture.
...
1) always use preferences directly
2) allow nicknames from either preferences or project
3) store-after-modify
Fixes https://gitlab.com/kicad/code/kicad/issues/12000
Fixes https://gitlab.com/kicad/code/kicad/issues/11892
2022-07-22 09:31:10 +01:00
b80fd5329d
Clear dimension pointer after committing.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11864
2022-07-22 09:31:09 +01:00
004abcd370
Leave originally selected items selected after cancelled move.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12024
2022-07-22 09:31:08 +01:00
16e3d40552
ADDED: Display calculated clearance in status bar
...
In addition to showing resolved clearance, we also show the calculated
clearance in the same method as is used for DRC. This will allow users
to better examine their system while working.
Fixes https://gitlab.com/kicad/code/kicad/issues/7934
2022-07-21 15:44:48 -07:00
49bf717c0e
fix minor compil warnings
2022-07-17 20:29:59 +02:00
2de10080cd
Add edge and margin clearances to message panel.
2022-07-15 16:14:32 +01:00
c98826c8b0
Open newly-pasted footprint on canvas of Footprint Editor.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11398
2022-07-15 14:13:39 +01:00
99f8b21ed1
PCB: Add bitmap layer per board layer
2022-07-14 11:23:23 +00:00
3669cb4673
PCB Editor: Add User Background Images
2022-07-14 11:23:23 +00:00
b5bf1da251
Keep track of blocking windows
...
Allows the calling KiWAY player to send messages to the blocking window
before signaling a separate call
Fixes https://gitlab.com/kicad/code/kicad/issues/11891
Fixes https://gitlab.com/kicad/code/kicad/issues/11772
2022-07-13 19:25:24 -07:00
20a372ff69
ADDED Clearance data in PCB editor status bar
...
When selecting two objects, display the resolved clearance and
(optionally) hole clearance in the status bar
2022-07-13 15:04:32 -07:00
e87ba10a5a
Enforce group selection to abide by L/R behavior
...
When selecting greedy (right to left), selecting any part of the group
will get the whole group. When selecting left to right, we must select
all items in the group to get the grouped items unless we are in the
group itself
Fixes https://gitlab.com/kicad/code/kicad/issues/11902
2022-07-12 11:01:34 -07:00
57acce9e55
Share more code between selection tools.
2022-07-11 19:04:08 -06:00
aaf99eb0cc
Performance optimizations.
2022-07-11 21:25:12 +00:00
19b4844102
Avoid OSX system shortcut.
...
CHANGED toggle net highlight from ctrl-` to opt-`.
Fixes https://gitlab.com/kicad/code/kicad/issues/10160
2022-07-10 20:20:22 -06:00
e122dc38bd
Add context menu item for clearing net highlighting.
...
In selection tools, drawing tools, router tool, line_wire_bus tool.
Fixes https://gitlab.com/kicad/code/kicad/issues/11920
2022-07-10 17:15:20 -06:00
654740b90d
Add newly-drawn objects to any entered group.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11912
2022-07-08 17:27:05 -06:00
8a9bf02b7e
Smarten up silk clearance & tented item handling.
...
The inspection tool will report whether or not the item is tented
(indicating in that case that any clearance will only be applied
to any hole).
The DRC test ignores tented items without a hole, and runs the
clearance test against the hole for items with a hole.
Fixes https://gitlab.com/kicad/code/kicad/issues/11954
Fixes https://gitlab.com/kicad/code/kicad/issues/11951
2022-07-08 17:27:05 -06:00
0c47a09517
Ensure rectangles are normalized
...
Normalize on creation and fixup rectangles previously saved with
inverted coordinates
Fixes https://gitlab.com/kicad/code/kicad/issues/11965
2022-07-07 10:40:18 -07:00
7b28804f67
Fix a minor compil and Coverity warning
2022-07-06 13:54:17 +02:00
f00de04336
FP editor: fix incorrect mirroring of zones in footprint.
...
This is due to a call to Mirror() with incorrect parameter.
Unfortunately, depending on FP items, one Mirror parameter has the opposite
meaning about mirror axis.
Fixes #11952
https://gitlab.com/kicad/code/kicad/issues/11952
2022-07-04 11:14:47 +02:00
cde30d3dba
Clarify cross-probing options
...
Previous the cross-probing options were mixed between sending and
receiving cross-probe events. This clarifies so that all of the pcbnew
cross-probe options deal with whether the cross-probe is seen in pcbnew
and all of the eeschema options deal with seeing the event in eeschema.
Also updates the wording in the options panels to be the same where
possible and adds tooltips
Fixes https://gitlab.com/kicad/code/kicad/issues/11454
2022-07-01 16:47:09 -07:00
af6ba1a16e
Fix typos in pcbnew sub-directory
...
Found via `codespell -q 3 -S *.po,./thirdparty,./Documentation/changelogs -L aactual,acount,aline,alocation,alog,anormal,anumber,aother,apoints,aparent,aray,ba,busses,dout,einstance,leaded,modul,ontext,ot,overide,serie,te,,tesselate,tesselator,tht`
2022-06-30 09:39:45 -04:00
64b89639cf
PCB Editor: Make Ctrl-Click net highlighting configurable
...
Defaults to ctrl-click is exclusive or selection like other
applications. Footprint editor can only be exclusive or.
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/10810
2022-06-28 16:29:14 +00:00
ab9c42d427
Fix a typo which leads to a bogus type-cast.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11886
2022-06-27 23:07:06 -06:00
23e8bafd9c
Don't run courtyard conflicts in footprint editor.
2022-06-20 22:25:39 +01:00
298edb09c3
Initialize TEXT_ATTRIBUTES justifications for text & textboxes.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11805
2022-06-20 17:03:37 +01:00
73836b50fc
Add proper collision test to via placer.
...
Also moves DISALLOW constraint processing outside the loop as it
performs it's own loop over any objects referenced by the rules.
Fixes https://gitlab.com/kicad/code/kicad/issues/11832
2022-06-19 21:57:49 +01:00
5da817649b
Fix nullptr bug.
2022-06-18 13:04:06 +01:00
97b0005780
More caching for DRC.
...
Also fixes a bug where some physical clearance tests would be run even
if the clearance was 0 (or if the rule was set to IGNORE).
2022-06-17 23:58:31 +01:00
d40664d171
Handle double-click in dimension drawing tool.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11815
2022-06-15 18:07:50 +01:00
87f10ea206
Split off the netlist export content helper but it's advancedcfg
2022-06-11 23:09:47 -04:00
9b70308f5c
Nullptr defensive code.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11690
2022-06-11 22:32:12 +01:00
d31bd4ea3e
Use default text properties for textboxes.
...
Also make sure text is mirrored when placed on back of board.
Fixes https://gitlab.com/kicad/code/kicad/issues/11739
2022-06-03 18:48:09 +01:00
bd51b33f65
Clear point editor before recombining pad.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11731
2022-06-02 15:55:35 +01:00
de12c63de6
Repair point editing of rotated text boxes.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11432
2022-06-02 10:42:57 +01:00
f8829de5ea
Formatting.
2022-06-02 10:42:57 +01:00
155620cc9a
Move H/V/45 mode from zone properties to toolbar.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8587
2022-05-29 21:30:15 +01:00
1fb7532859
Prepare for a more uniform implementation of H/V/45 mode.
2022-05-29 21:30:14 +01:00
21a7e050ab
REMOVED: PCB Editor Layer Alignment Target
...
No longer used by modern PCB processes.
Only the code to add the target to the board has been removed. Parsing
code for existing designs with targets is left in place.
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/10006
2022-05-26 08:47:02 -04:00
f7fcc310f8
Select next/prev copper layer whether we start on copper or not.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11600
2022-05-20 15:59:29 +01:00
a09bd4ae12
Fix a bug in commit 57e59a49
2022-05-20 15:08:50 +02:00
57e59a4959
Pcbnew, on line DRC when moving footprints: add visible collisions between courtyards
2022-05-20 12:58:05 +02:00
23fb4c7433
Uniformly use a single facility for location-less prime events.
...
Also implements a uniform mechanism for avoiding auto-scroll after
a prime event or dialog which results in a mouse position at the
edge of the canvas.
Fixes https://gitlab.com/kicad/code/kicad/issues/11057
2022-05-16 23:43:00 +01:00
f2fc78f380
Don't copy modifiers to prime events.
...
The modifiers go with the hotkey, not with the action.
Fixes https://gitlab.com/kicad/code/kicad/issues/11618
2022-05-16 13:51:40 +01:00
37838dffb9
Make sure physical_clearance rules are run against courtyard layers.
2022-05-10 23:02:53 +01:00
30ecca464d
Rename mechanical_clearance -> physical_clearance.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11554
2022-05-06 15:54:46 +01:00
5d0d2201f3
Improve clearance report messages.
...
Removes some duplicated terms; puts in some more headers to make
visual parsing easier, and makes non-connected-pads report the correct
data.
Also fixes a bug where zone-connection overrides of none weren't getting
handled correctly.
Fixes https://gitlab.com/kicad/code/kicad/issues/11544
2022-05-03 16:30:04 +01:00
5f10c15a87
Fix zone merge intersection algorithm.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11492
2022-04-29 22:17:53 +01:00
f5d612eaed
Switch <insert> replacement on OSX to <f1>.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11413
2022-04-25 10:01:33 +01:00
90bfe2d94b
Remove Save Copy As from fp editor, and rename to Save a Copy elsewhere.
...
It's still used by Eeschema and PCBNew when not in stand-alone mode.
Fixes https://gitlab.com/kicad/code/kicad/issues/9185
2022-04-24 19:46:57 +01:00
f0dab2e07b
Fix some layer handling issues.
2022-04-23 21:29:46 +01:00
c6f83b6dec
ADDED Duplicate Footprint, Rename Symbol and Rename Footprint.
2022-04-22 22:06:51 +01:00
b42365190e
Schematic/PCB: deleting fields sets them to invisible
2022-04-21 16:20:23 +00:00
26370583fa
French translation update and fix a typo.
2022-04-18 11:25:51 +02:00
71c2cb3180
ADDED revert for pcbnew and eeschema.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6802
2022-04-17 20:02:58 +01:00
9ff1ae5bdc
Better inspection reporting for netclasses, custom rules and DRC.
2022-04-17 00:33:56 +01:00
7f3a75bccd
Add a bunch more inspections for rule resolution.
2022-04-15 22:10:13 +01:00
c78a47c3fb
Remove extra test.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10364
Fixes https://gitlab.com/kicad/code/kicad/issues/10364
2022-04-14 17:09:27 +01:00
a49bb792bd
Insert chevrons when placing vias near tracks.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10898
2022-04-11 16:26:36 +01:00
29eb5931c2
Be more careful with forced cursor positions.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9977
2022-04-10 23:14:57 +01:00
c17b90c8dc
Run pinning on sides as well as corners.
...
Also fixes a bug in LIB_SHAPE's Normalize() which wasn't handling the
upside-down coordinate system.
Fixes https://gitlab.com/kicad/code/kicad/issues/11339
2022-04-07 11:51:58 +01:00
9fcc641808
Don't set the dirty bit when running DRC
...
Dirty bit is set in the zone filler separately, there is no action in
the DRC that needs to be saved
Fixes https://gitlab.com/kicad/code/kicad/issues/11344
(cherry picked from commit 821fe6ea42
2022-04-06 17:05:19 -07:00
f272056f20
Fix assert.
2022-04-04 20:43:08 +01:00
7f7910d922
Dirty text caches in pcb point editor.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11319
2022-04-04 17:39:58 +01:00
737d65fd36
Skip zero-size elements when converting
...
Also fixes an assertion when converting to polygon from the board editor
Fixes https://gitlab.com/kicad/code/kicad/issues/11313
(cherry picked from commit 6706a5c462
2022-04-01 13:24:10 -07:00
d174af4006
Handle textboxes moving back to RECT shape (ie: cardinal rotation).
2022-04-01 16:12:23 +01:00
a35ae8cdce
Don't re-fetch selection when running select-in-same-sheet.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11110
2022-03-28 21:54:24 +01:00
e51ab86225
Schematic Drag: fixes and improvements
...
Fixes:
* Various special cases around junctions on pins and dragging.
* Some rotations of endpoints resulting in a 45 degree rotate.
* Some cases where it was possible to get a line with neither
endpoint selected, and also substractive unselecting only one of two
selected endpoints unselecting both.
* Use line midpoint for sorting. Start and endpoints aren't
consistent in the order they appear on the X or Y axis. So,
we need to use the midpoint for our position for consistent
sorting when dragging groups of parallel lines where some
have the start and end reversed.
Other:
* Rename TEMP_SELECTED TO SELECTED_BY_DRAG. This is the actual meaning
of the flag, and should reduce confusion as
to when it should be used.
* Move usage of TEMP_SELECTED as an algorithmic mark to CANDIDATE
instead.
* Fix mistaken clearing of START_POINT and ENDPOINT.
* Move endpoint setting and clearing out of narrowSelection, and into
selectPoint and selectMultiple.
* Don't show dangling end warnings on new lines
2022-03-28 16:02:48 -04:00
343b2681d4
Midpoints for eeschema rectangles and text boxes.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10362
2022-03-28 11:16:39 +01:00
7da7864f5e
Fix some Coverity issues.
2022-03-25 15:51:05 -04:00
7b2d9dfc0c
Fix some Coverity uninitialized scalar variable issues.
2022-03-24 13:17:07 -04:00
cf611f1742
Better safety around layersets.
2022-03-21 18:19:00 +00:00
4f62960334
Update message panel from PCB point editor and SCH drawing tools.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11186
2022-03-21 10:32:36 +00:00
fa5a484797
Remove unused variable.
2022-03-16 14:56:32 +00:00
06c1bccccd
Exclude hidden text from selection in FP Editor.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11111
2022-03-12 23:29:01 +00:00
d452f79860
pcbnew: search for nets
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/10601
2022-03-10 23:12:30 +00:00
b5c2f0d39a
Remove the open array in favor of std containers
...
The containers allow iteration, size knowledge and lower bug surface
2022-03-03 16:03:26 -08:00
ec5b7a57ec
Consistency in via dimensions terminology.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11024
2022-03-03 22:40:18 +00:00
2fafa55647
Maintain width of converted tracks
2022-03-02 10:45:53 -08:00
7e836ae27a
Select the copper layer before processing
...
If we are converting to tracks, the copper layer needs to be selected
before any other elements are processed, otherwise, we end up with the
default undefined layer
Fixes https://gitlab.com/kicad/code/kicad/issues/11025
(cherry picked from commit 9396735733
2022-03-02 10:41:44 -08:00
1966972fc1
Retire no-pads warning in favour of defaulting to area-based remove islands strategy.
2022-03-01 19:19:18 +00:00
843a56c4e4
Implement two-staged zone priority: assigned priority followed by UUID.
2022-03-01 14:53:35 +00:00
a4a3f6ff74
Fix zone/connectivity deadlock.
2022-03-01 12:02:17 +00:00
fab78af176
Remove TEDIT
...
This marker is not used in KiCad and creates merge conflicts when two
different users edit the same file
2022-03-01 00:25:44 +00:00
58b8d63ff8
Draw boundary based on first zone layer.
2022-02-28 21:40:36 +00:00
d299ddbc7e
Cleanup.
2022-02-27 12:05:39 +00:00
ae85f57577
Drop a knee between tracks to a single item when dragging.
...
This prevents the disambiguation menu from coming up when we don't
really care which element we start the drag on.
Fixes https://gitlab.com/kicad/code/kicad/issues/10745
2022-02-26 22:54:23 +00:00
89c14f01f7
Repair algorithm to avoid slow movement issue.
...
This goes back to the previous code for this one part.
Fixes https://gitlab.com/kicad/code/kicad/issues/10976
2022-02-26 15:58:44 +00:00
535ea800c0
Honor modifier keys in diambiguation
...
Needs to be reset for the new action before selecting elements at a
point.
Fixes https://gitlab.com/kicad/code/kicad/issues/9712
(cherry picked from commit a30ad0b54a
2022-02-25 16:16:15 -08:00
283aaff2df
Use board polygon instead of bbox for size
...
Board BBox uses the visible size of the board, which includes edge cut
thickness. This is not appropriate for the Board characteristics.
Using the outline polygon gives accurate results and falls back to a
bounding box in the case where the outline is invalid
Fixes https://gitlab.com/kicad/code/kicad/issues/10972
(cherry picked from commit 54f621c570
2022-02-25 11:14:54 -08:00
a7b8a1446b
fix minor compil warnings.
2022-02-25 14:26:37 +01:00
bc51c89c90
Reconcile zone-auto-fill with undo.
2022-02-25 13:05:49 +00:00
5c54f40eae
Layer visibilities aren't stored in project for footprint editor.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10953
2022-02-25 00:08:49 +00:00
d65f9ad2d8
Implement multi-layer stitching via logic.
2022-02-24 21:32:43 +00:00
369f53bb19
Better DRC checking when placing vias.
2022-02-24 21:32:43 +00:00
b7be42375d
Add an infobar warning when trying to fill a zone which is not connected.
2022-02-24 21:32:43 +00:00
d465eb6425
ADDED: automatic zone refilling.
...
This is for the out-of-box experience for novice users. It is presumed
that folks with larger more complicated boards will turn it off.
Fixes https://gitlab.com/kicad/code/kicad/issues/6413
2022-02-24 18:16:45 +00:00
f076d07e9e
Fix asserts.
2022-02-24 18:16:45 +00:00
41f6e634c6
Partially integrate grid snapping with constraints.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10941
2022-02-22 22:19:55 +00:00
df3291c59d
Fix nullptr error (no router tool in footprint editor).
2022-02-20 16:56:53 +00:00
f18aae679c
Use router to update message panel when routing.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10068
2022-02-20 16:50:30 +00:00
85805b95ba
Cancel or commit pad edit mode when switching footprints.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10209
2022-02-19 19:36:19 +00:00
5efa354f0f
Add asserts to flush out incorrect uses of GetLayer().
2022-02-18 12:14:38 +00:00
662fb40605
Slightly cleaner impl.
2022-02-17 12:48:29 +00:00
5a9fb08778
zone_filler_tool: fix crash due to a null pointer use in zone filler.
...
Fixes #10875
https://gitlab.com/kicad/code/kicad/issues/10875
2022-02-17 09:21:14 +01:00
b1bd8421e0
Performance: remove associated triangle sets when removing outline.
...
This saves us having to re-triangulate at the end of zone filling.
2022-02-16 17:00:54 +00:00
5c9e718407
Performance enhancements for connectivity.
...
1) Generate SHAPE_POLY_SET triangulation by outline so they can be
shared between connectivity system and other clients.
2) Don't add items to connectivity when reading board; we're going
to do a total rebuild anyway.
3) Use multithreading when caching triangulation.
2022-02-15 12:20:34 +00:00
98b9c6e2a1
Better progress reporting and a slight performance boost on commit.
2022-02-15 12:20:34 +00:00
d2de114d21
More performance optimizations.
2022-02-15 12:20:34 +00:00
876061369b
Fix some Pcbnew crashes due to null pointers
2022-02-14 13:46:05 +01:00
a2ca8cf413
Improve SNR.
2022-02-12 18:38:11 +00:00
00934fdd84
Move GUI queries in PLUGIN to a callback.
...
Also makes sure legacy zone fills get deleted and re-filled (since
just dropping the outline will change them).
2022-02-11 22:09:22 +00:00
68655540eb
Clamp cursor to limits of coordinates representation
...
Also improves large distance handling.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8846
2022-02-11 16:42:52 +00:00
50a4d610a6
Be cognizant of flashed layers when generating pad shapes.
2022-02-11 13:10:52 +00:00
51d7b49067
Don't halt expansion on zero-length
...
We avoid counting endpoints for tracks that have no length
2022-02-07 13:53:42 -08:00
162545ddf0
Validate arc output when editing
...
Handles checking output of the arc to ensure we don't end up generating
an invalid arc. Also keeps the limit of the arc angle to be (360,360)
excluding 0.
Fixes https://gitlab.com/kicad/code/kicad/issues/10070
(cherry picked from commit 8fc831cbc2
2022-02-07 08:55:53 -08:00
2485648a54
Fix typo in a copy/paste and a minor compil warning
2022-02-07 17:32:19 +01:00
34a9a165c9
More wide-string declarations.
2022-02-05 22:26:31 +00:00
a7ebfc31f9
Fix some leaking objects identified by PVS Studio V773
2022-02-05 11:16:11 -05:00
4cc1ced2f3
Log an undo item when filling zones.
...
If we wanted to put it into the parent's undo item, then the *parent*
would need to not start a new undo record. Not starting one in the
zone filler tries to add it to the *previous* change, not to the parent
change.
Fixes https://gitlab.com/kicad/code/kicad/issues/10091
2022-02-04 13:45:32 +00:00
8d3e1639d0
Update text variables when they change.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10734
2022-02-04 12:52:46 +00:00
c8d14ade65
Only run starved-thermals checks when pad is actually connected to zone.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10583
2022-02-02 13:09:27 +00:00
5739505aa3
TextBoxes for PCBNew.
2022-01-31 20:00:47 +00:00
f846f6f704
PCB_CONTROL::unfilledZoneCheck(): skip rule areas: they are not filled by definition.
...
Fixes #10691
https://gitlab.com/kicad/code/kicad/issues/10691
2022-01-31 17:01:52 +01:00
e9ffea83fd
Cross-probing: Do not center/zoom on empty BBox
2022-01-31 10:17:59 +03:00
f8d6bf4cc9
Hide text items which are required on a single-item delete.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9973
2022-01-22 22:27:41 +00:00
5449a92878
PCB_POINT_EDITOR: fix missing init of PAD pos0 after changing the PAD draw pos.
...
Fixes #10558
https://gitlab.com/kicad/code/kicad/issues/10558
2022-01-22 10:23:55 +01:00
d5a2059c21
Error messages for zone merging.
...
Also fixes a bug where zones meeting at a point would get merged
resulting in a self-intersecting zone.
Also fixes a bug where undo would not be handled correctly when zones
could not be merged.
Fixes https://gitlab.com/kicad/code/kicad/issues/10466
2022-01-21 19:55:57 +00:00
c8a50d9b50
Remove unit-less angles from VECTOR2I/D APIs.
2022-01-20 23:58:20 +00:00
47c0672ff3
Added footprint rule area anchors
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/10461
2022-01-19 18:25:20 +00:00
bc1ff6756f
Cross-probing/selection for multiple items (SCH->PCB)
2022-01-16 20:29:03 +00:00
e84c574830
Some more EDA_ANGLE cleanup.
2022-01-16 19:16:18 +00:00
9b661aea10
EDA_ANGLE for plotters.
...
Also fixes a compile error in the PNS Playground.
2022-01-16 01:19:45 +00:00
22a77d3556
Move EDA_ANGLE to KiMath lib
...
KiMath should only depend on itself not on other elements in the tree
2022-01-14 17:12:24 -08:00
07013d00e1
More EDA_ANGLE.
2022-01-14 16:08:19 +00:00
5176512de3
Move PCBNew rotation increment to EDA_ANGLE.
2022-01-14 16:08:19 +00:00
c9487bad18
Move BOARD_ITEM::Rotate() to EDA_ANGLE.
2022-01-14 16:08:19 +00:00
abd3f5bc2b
Move footprints to EDA_ANGLE.
2022-01-14 16:08:18 +00:00
d485eb2514
Move pads to EDA_ANGLE.
2022-01-14 16:08:18 +00:00
de7158b80e
Include Footprints within Groups when re annotating duplicates
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/10329
2022-01-11 20:51:03 +00:00
fade00a2b8
Remove default hotkey for toggle zone display
...
It is too easy to accidentally hide your zones and the 'A' hotkey is
intuitively mapped to Add Footprint, to match Add Symbol in eeschema.
This won't change current hotkey customizations but will help prevent
future user error. Users can still map the action to a hotkey if the
new toggle is useful to their workflow
(cherry picked from commit 4d899d7820
2022-01-10 11:52:41 -08:00
bf38cb56b7
Handle footprint shapes in polygon creation
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/10259
(cherry picked from commit f9d8ec6137
2022-01-04 21:31:47 -05:00
4be56825bb
Fix creating polygons from footprint rule areas
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/10257
(cherry picked from commit e9b91b6fab
2022-01-04 21:31:40 -05:00
ed35f4bfc5
Fix pad snapping in renumber pads
...
Snap shouldn't be looking for other items in this routine or using the
grid
Fixes https://gitlab.com/kicad/code/kicad/issues/10238
(cherry picked from commit ed9a3deb57
2022-01-03 19:39:04 -08:00
89c0f8e297
Move to new font engine.
2022-01-02 14:57:03 +00:00
7d671cff1e
Scoop up some more wxPoints
2022-01-01 21:06:40 -05:00
410ed8a071
Prevent ops on empty selection
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10164
(cherry picked from commit bd75cffff3
2022-01-01 15:29:18 -08:00
d1552c3fec
Some more wxPoint removal
2022-01-01 12:11:21 -05:00
c4c56de708
Neurotically update position wxPoint usages
2022-01-01 11:55:51 -05:00
347e03363a
Convert wxPoint/wxSize starting from EDA_RECT usages
2022-01-01 11:30:33 -05:00
86cb57f4a7
Cherry-pick TEXT_ATTRIBUTES and EDA_ANGLE from rockola/kicad-strokefont
2021-12-28 22:15:20 +00:00
3a8ffd40b8
Fix dimension drawing bug.
2021-12-26 17:30:21 +00:00
ab583a32f9
Better layer handling for DRC markers.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10126
2021-12-26 15:06:12 +00:00
5e4a704155
Remove some more duplicated preferences.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10112
2021-12-26 13:37:28 +00:00
fa908e1f98
Dimensions for footprints.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8441
2021-12-24 21:10:28 +00:00
ed79f6e511
Clean up some TODOs.
2021-12-24 21:10:28 +00:00
da11574a19
Remove dead code.
2021-12-24 21:10:28 +00:00
b4c5e64db2
Exclusions for Unconnected Items; Markers & exclusions for Parity checks
...
Fixes https://gitlab.com/kicad/code/kicad/issues/5589
Fixes https://gitlab.com/kicad/code/kicad/issues/5504
2021-12-24 21:10:28 +00:00
e363a0eedc
ADDED Edit Text and Graphics Properties for Footprint Editor.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9650
2021-12-24 18:13:21 +00:00
3f90b3e2a0
Keep line stroke params as long as layer doesn't change.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6210
2021-12-24 16:13:51 +00:00
b7e196b710
ADDED assertion constraints for user-defined DRC checks.
2021-12-24 16:13:18 +00:00
4ba3937f8a
Cleanup.
2021-12-24 15:43:24 +00:00
d28714167c
All the preferences, all the time.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7877
Fixes https://gitlab.com/kicad/code/kicad/issues/5153
2021-12-24 13:08:44 +00:00
56c85bd354
Improve clearance and constraint resolution reporting.
...
1) Report on all applicable clearance types
2) Don't double-book constraints if they're used by more than one
test provider
Fixes https://gitlab.com/kicad/code/kicad/issues/8961
2021-12-23 22:31:26 +00:00
a48867ea01
Solder mask integrity testing.
...
ADDED DRC test for solder mask aperture bridging copper from different
nets.
ADDED visualization of minimum web width processing for solder masks.
ADDED allow_soldermask_bridges property for footprints.
Fixes https://gitlab.com/kicad/code/kicad/issues/2183
Fixes https://gitlab.com/kicad/code/kicad/issues/1792
2021-12-23 22:31:14 +00:00
32721755bf
Hook up zone-pad connections to custom rules.
...
ADDED zone_connection constraint.
ADDED thermal_relief_gap and thermal_spoke_width constraints.
ADDED angle override for thermal relief spokes in Pad Properties.
Fixes https://gitlab.com/kicad/code/kicad/issues/4067
2021-12-23 22:30:26 +00:00
e26341d424
Cleanup.
2021-12-23 20:36:18 +00:00
2bc86fa0a8
Shapes for schematic.
...
ADDED arc, circle and rectangle shapes for schematic. Shapes support
line styles and fill colors.
CHANGED sheet background color in Edit Text & Graphics Properties to
fill color (and it now affects shapes).
Pushed STROKE_PARAMS down into common and moved all shapes to using it
for stroke descriptions.
2021-12-23 20:36:07 +00:00
4b6bf3095a
Radial dimensions.
...
ADDED radial type dimensions.
Fixes https://gitlab.com/kicad/code/kicad/issues/2056
2021-12-23 19:34:54 +00:00
d9dba2edb2
Tidy up pad & parent footprint selection corner cases.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9923
2021-12-23 16:54:03 +00:00
f696c4ddfc
Fix failure to remove hover selection after rotate operation.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10058
2021-12-23 16:54:03 +00:00
956ac871c3
PCB Editor: changes to track width overrides starting track width
...
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/8797
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/8797
2021-12-15 23:32:48 +00:00
401de24274
Recalculate ratsnest after zone fill
...
Push the mutex down into the ZONE::Fill() routine and set the
connectivity update to run after zone fills. The connectivity update
cannot run while the mutex is locked for zone fills.
Fixes https://gitlab.com/kicad/code/kicad/issues/9993
2021-12-14 13:37:15 -08:00
4c565fd222
Top layers includes a whole bunch of layers...
...
... and the first isn't particularly meaningful. Use GetActiveLayer
instead.
Fixes https://gitlab.com/kicad/code/kicad/issues/9972
2021-12-13 18:23:18 +00:00
84e0feeee6
LibTree selection should follow footprint after Save As.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9913
2021-12-10 00:45:21 +00:00
62e6f542ed
Init zone type when creating in convert tool
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9918
2021-12-09 18:20:30 -05:00
9884f40952
Update call signature for SwitchLayer
...
We don't use DC anymore
2021-12-09 10:14:11 -08:00
a9168860e0
Reduce excessive epsilon in polygon search algo
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9903
2021-12-08 21:04:23 -05:00
587ee890d9
Move where flag is cleared to catch more cases
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9892
2021-12-08 20:46:53 -05:00
e9847cf2bd
Exclude vias from first 'U' step.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9902
2021-12-08 23:16:33 +00:00
df1e74d418
Clean up dead code from last commit.
2021-12-08 23:16:33 +00:00
7ffd43a6f4
Regularize the promotion of pads to footprints in non-free-pad mode.
...
Also regularizes some of the other selection filtering options.
This also fixes an invalidated iterator (and subsequent segfault) in
the old code.
Fixes https://gitlab.com/kicad/code/kicad/issues/9896
2021-12-08 13:08:54 +00:00
9c619d8f4e
Allow some navigation tools when selecting
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9565
2021-12-07 23:00:39 +00:00
a7193e0932
Do not warp cursor to last location when footprint/text placement is activated from toolbar/menu.
...
Also makes the footprint appear instantly after closing the dialog.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9840
2021-12-07 22:48:56 +00:00
73b39e836d
Set modify bit when editing page layout.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9891
2021-12-06 23:08:33 +00:00
2446844cd3
Fix bugs in free-pad logic.
...
Don't promote pads to parent footprint selection when NOT in free
pad mode during move.
Implement move algorithm in rotate.
Fixes https://gitlab.com/kicad/code/kicad/issues/9893
2021-12-06 22:53:45 +00:00
04b0435c45
Snap to pads when placing via
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9873
2021-12-06 15:54:49 +00:00
Jeff Young
Alex
jean-pierre charras
Mike Williams
Jon Evans
Seth Hillbrand
qu1ck
Greg Davill
Graham Keeth
Wayne Stambaugh
aris-kimi
Marek Roszko
lulu731
Maciej Suminski
luz paz
Fabien Corona
Roberto Fernandez Bautista
Jonathan Haas