The tools were being set as idle, whenever an event handler execution
finished (via TOOL_MANAGER::finishTool()). Such approach does not take
into account cases when a tool is active and receives an event causing
another event handler of the same tool to run. When this happend, the
tool has been incorrectly set as idle when the second handler finished
its execution.
In a particular case, invoking the router settings dialog caused the PNS
router to be incorrectly detected as inactive in
EDIT_TOOL::invokeInlineRouter(). Due to that, ROUTER_TOOL::CanInlineDrag()
requested a selection that required disambiguation menu for items
that were modified by the router, but not yet committed. After the drag
tool had finished, the disambiguation menu was eventually shown
with items existing only in the undo buffer. Removing such item lead to
track DLIST corruption, effectively erasing all tracks.
Fixes: lp:1767826
* https://bugs.launchpad.net/kicad/+bug/1767826
The opencascade patch intrusively checked against libraries but broke
some build scripts. This restores the default cmake OCE behavior that was
changed by 2bab30d9a and makes the OpenCascade search truly secondary.
Minor improvement in polygon calculation to use consecutive points
rather than casting to a full segment. Avoids division except when it
will not create a denormal.
Footprint filter provides two Regex filtering options. One for keywords
and one for footprint keywords. The footprint keywords (contained in
the symbol files) need explicit '*' at the beginning and end of the
filters to allow matching start/end. Type-in filters should search
implicitly matching any wildcard substring.
Fixes: lp:1769931
* https://bugs.launchpad.net/kicad/+bug/1769931
Recent versions of wxWidgets wxStandardPaths::GetUserConfigDir() correctly
append ".config" on Linux build which was incorrect as the current code
already appended it to the path. Add a check to see if ".config" is the
last path and append as required.
Check for XDG_CONFIG_HOME environment variable on all platforms not just
Linux.
Fixes lp:1769145
https://bugs.launchpad.net/kicad/+bug/1769145
Changes SHAPE_CONVEX to SHAPE_SIMPLE to better reflect the limitations.
Changes SHAPE_LINE_CHAIN::PointInside calculation to allow points
strictly inside a line chain
Fixes: lp:1768862
* https://bugs.launchpad.net/kicad/+bug/1768862
The only required scroll event handler is wxEVT_SCROLLWIN_THUMBTRACK,
which is responsible for dragging the scrolling sliders. One of the
remaining ones is also called when mousewheel is scrolled (MSW only) and
due to that overrides the new view setting with view settings computed
from the sliders position.
Fixes: lp:1767604
* https://bugs.launchpad.net/kicad/+bug/1767604
Footprint filters need to be able to match the start and end of strings.
The standard wildcard filter implictly adds "*" to the start and end of
match strings, so we create a derived class that requires an explicit
"*" or "?" to match wildcards.
Fixes: lp:1751565
* https://bugs.launchpad.net/kicad/+bug/1751565
KiCad read incorrect value for window position and it's size at very
first launch, which results in invisble/inaccessible window on Mac OSX.
Set correct default values for these settings fixes this issue.
And fix a typo in comment.
Corrects an error in polyline estimation
Syncs graphics to world PNS by whole layer set rather than
individual layer at a time.
Prevents reloading of full pns TOOL_BASE during reset of tools unless
the tool is being activated.
Fixes: lp:1766626
* https://bugs.launchpad.net/kicad/+bug/1766626
It is a C-style assert causing application termination when triggered.
Certain systems display pcbnew window shrinked so much, that the canvas
size is 0x0 pixels. The only problem with that is the window needs to be
resized.
Fixes: lp:1767031
* https://bugs.launchpad.net/kicad/+bug/1767031
Also removes parallel implementation in favour of using the
normal one (with a new wxGauge-backed PROGRESS_REPORTER).
Fixes: lp:1764196
* https://bugs.launchpad.net/kicad/+bug/1764196
The hotkey fix committed in 53b1ec81 broke non-us keyboards. Change the
hotkey help hotkey from '?' to Ctrl+F1 to prevent the hotkey list dialog
from being shown when placing a bus wire junction in Eeschema and when
changing the track posture in Pcbnew. This is still broken in the GAL
framework.
Symbol/footprint library and entry have the same set of forbidden
characters with a single exception, space character. To accommodate for
this difference, LIB_ID validation and fix methods have been extended to
specify the LIB_ID type that is checked (schematic/board).
LIB_ID::HasIllegalChars() and LIB_ID::FixIllegalChars() had two different
sets of characters treated as invalid in LIB_IDs. The set has been
factored out to another function to avoid duplication.
wxASSERT(), contrary to assert() does not terminate the program when
triggered. As assertions in ACTION_MANAGER are not critical and should be
treated as warnings - there is no need to close the program.
Also update the rest of the symbol-chooser usage to current
specs, including examining the timestamp to see if the list
needs loading at all.
Partial fix to: lp:1760936
* https://bugs.launchpad.net/kicad/+bug/1760936
The change track posture hotkey '/' was getting interpreted as the show
hotkey list shortcut '?' on windows. This fix is temporary hack to fix
the problem which much more involved than the simple #ifdef/#endif used
to fix this issue.
Add key code tracing to help analyze key codes for future development.
This is due to the fact the same ID was used for menuitems in menubar,
and tools in toobars.
Especially, some items were not compatible due to different attributes.
Windows does not accept the same ID for 2 items inside the same frame.
It creates issues (items not shown, Asserts, ...)
Fixes issue where TestSegmentHit falsely skips segments that are
slightly off 45°. Improves speed of function by exiting on non-hits
more quickly. Simplifies function and removes magic numbers.
This is so that tools checking for a selected item won't think
the menu has been cancelled if the selection was in a submenu.
Fixes: lp:1758372
* https://bugs.launchpad.net/kicad/+bug/1758372
While we already cache the loaded footprint files, parsing said files
into the list is also time-intensive. Since the FOOTPRINT_LIST is
already hash-stamped against the current timestamps of the files that
make up the list, sharing a single copy of the list is quite
straight-forward.
Clearing bClError flag in NumericEvaluator::parseOk() made the
expression look valid, even if the flag has been set for a previous
token. Now it is cleared before an expression is parsed and verified
after parser finishes.
Fixes: lp:1756995
* https://bugs.launchpad.net/kicad/+bug/1756995
For some DRC checks, the location of the marker is not the location
of the first item in the resulting DRC_ITEM, so centering the screen
on PointA of the DRC_ITEM can be confusing.
DIALOG_SHIM stores the dialog position, so every time it is shown, it is
displayed in the same location. This caused problems on multidisplay
setups, as dialogs could show up off the screen if the original display
has been detached in the meantime, effectively making them inaccesible
to the user.
Fixes: lp:1756623
* https://bugs.launchpad.net/kicad/+bug/1756623
- changed EAGLE_UNIT enum names from EAGLE_* to EU_*
- renamed ToNanoMeters() to ConvertToNm() and added a comment
- added ToMils() and ToNanoMeters() method
It's too expensive to fetch the timestamps when the github
server is busy. See Dick Hollenbeck's comments at the top of
github_plugin.cpp for more info.
Also adds some safety to the other caching algorithms after
seeing github_plugin's wild-west usage of the kicad_plugin.
Fixes: lp:1753143
* https://bugs.launchpad.net/kicad/+bug/1753143
Normal SetValue() call would temporarily change the displayed
value, but as soon as the text widget receives focus again, the original
expression (not evaluated) is restored.
To avoid this, the original expression is cleared in the associated
NumericEvaluator object.
Since we are going to inspect every item for these calls, we don't
need to use the RTREE search, which is expensive with high item count.
This results in ~50% improvement in layer switching time in GerbView
when working with a set of large Gerber files.
If ',' is used as decimal separator by the current locale a '.' is also accepted.
Also add support for units "mi", "th" and "in" as described in the documentation of pcbnew.
Fixes: lp:1751315
* https://bugs.launchpad.net/kicad/+bug/1751315
Too many external applications fail to touch the parent directory.
Also removes FP_CACHE_ITEM lastMod times and dirty flags as we've
always loaded libraries atomically anyway.
Claws back some of the performance lost by being more efficient
with cache management for sequential calls to Enumerate and then
Load.
Fixes: lp:1750936
* https://bugs.launchpad.net/kicad/+bug/1750936
Add a library selector to the save dialog. Initialize it to the
footprint's library. This way a straigh-up save will do what's
expected.
However, the user can still select the active library (or any
other library) if they really did want to move the footprint.
Fixes: lp:1750918
* https://bugs.launchpad.net/kicad/+bug/1750918
Also adds indicators in layers palette for feedback.
Also generates sized images for all indicators instead of using
scaled bitmaps (which didn't look great).
Also fixes a completely unrelated typo in a UI string.
Includes some dialog changes to go with the menu update.
Includes promoting the Pcbnew graphics mode back to main menu.
Includes renaming Graphics modes to Toolsets.
This should fix a bunch of bugs with run-time generated sizes
that can grow larger than their minimums in other configurations.
Also fixes a related bug in the WX_HTML_REPORT_PANEL where the
min size was set in the wrong place.
Fixes: lp:1692442
* https://bugs.launchpad.net/kicad/+bug/1692442
Move sketch mode stuff from Display Settings to View menu.
Move Icons in Menus from View menu to General Preferences.
Move Icon Scaling from Display Settings to General Preferences.
Regroup some items in both dialogs for better comprehension.
Also fixes:
- forcing the annotation scope to "full schematic" when run
as a prerequisite to Generate Netlist.
- a long-standing bug where displaying extra items in a dialog
would mess up the height of the HTML_REPORT_PANEL (becasue
we were setting the html window's height rather than its
parent flexgrid.
- initializing the annotation radio buttons to safe values
(full schematic and keep existing)
Fixes: lp:1750062
* https://bugs.launchpad.net/kicad/+bug/1750062
All calls to {save,apply}ViewControls() have been replaced with a new
method: setActiveState(). The advantage is that setActiveState() always
saves view controls settings to the tool that set them. As long
as setActiveState() is called every time there is a tool context
switch, the changes are kept up-to-date.
Fixes: lp:1748613
* https://bugs.launchpad.net/kicad/+bug/1748613
Fixes a bunch of errors:
- libedit and libbrowser would zoom to bounding box but centre on canvas
- libedit, libbrowser and gerbview didn’t take the scroll bars into account
- pcbnew didn’t take scroll bars into account or apply the 10% margin
- appending a board file would re-centre, but not re-zoom
Fixes: lp:1504302
* https://bugs.launchpad.net/kicad/+bug/1504302
It affected just started tools that did not have cursor settings
stored, so could not be reverted after the context menu is gone.
Fixes: lp:1748613
* https://bugs.launchpad.net/kicad/+bug/1748613
Smartens the cache freshness checking, and adds checksums of
constituent-directory last-mod-dates to the footprint info
list.
Also inserts the dataPtrs into the list at the same time as
the text to keep wxWidgets from measuring the width of the
text twice (yes, really). And converts the list to default-
column widths in case the wxWidgets patch is present to
greatly speed list creation (by not measuring all that text).
On my machine drops the first-load time from 4s to 2.5s and
the subsequent-load times from 2.5s to < 1s. With the
wxWidgets patch subsequent-loads become near-instantaneous.
Many had already been fixed but weren't working on Mac because
of the DIALOG_SHIM hack (now fixed). Others hadn't been updated
yet. Also includes some cleanup for elipses in buttons and
layout.
Fixes: lp:1748506
* https://bugs.launchpad.net/kicad/+bug/1748506
Apparently calling wxDC::DrawEllipse() with parameters resulting in a
circle with radius equal to 0 lead to printing problems.
Fixes: lp:1746210
* https://bugs.launchpad.net/kicad/+bug/1746210
Launching right click context menu overrides the cursor position, so all
actions executed by the tools will be performed in the right click
position. It created an issue, as the overridden cursor settings were
saved into wrong context if there was another tool activated in the
meantime.
Current implementation saves cursor settings for all tools and restores
them once the right click context menu disappears.
Fixes: lp:1745981
* https://bugs.launchpad.net/kicad/+bug/1745981
Fixes: lp:1746507
* https://bugs.launchpad.net/kicad/+bug/1746507
Keystroke zoom (F1/F2) always centered the screen, because it
was handled as ID_POPUP_ZOOM_IN event. Mousewheel scrolling
was ok, because it is handled using different event based
on the configuration.
This patch introduces special event ids for keystroke
zooming that are then properly translated to either
ID_POPUP_ZOOM_IN or ID_OFFCENTER_ZOOM_IN depending
on the configuration.
The same issue is fixed for legacy canvas pcbnew.
Fixes: lp:1742567
* https://bugs.launchpad.net/kicad/+bug/1742567
Signed-off-by: Martin Sivak <mars@montik.net>
PICKED_ITEMS_LIST knows the architecture of the undo commands so
that it can delete those ITEMs which it owns. This represents poor
encapsulation so instead of adding yet another case, I added a
UR_TRANSIENT item flag which is set by callers whenever they create
new objects to “give to” the undo/redo stack. This allowed some
cleanup of other code, but cleaning up UR_DELETE and UR_WIRE_IMAGE
will be a bigger task and have to wait for another day.
Fixes: lp:1542018
* https://bugs.launchpad.net/kicad/+bug/1542018
The undo/redo operations are essentially the same as for
UR_CHANGED: we store both the origin marker item and a copy
of it and flip back and forth between the two. This also
required the implementation of clone() for the markers.
The ORIGIN_VIEWMARKER is moved from being a subclass of
EDA_ITEM to BOARD_ITEM to facilitate the use of a UR_CHANGE-
like implementation without having to know the internals
of the ORIGIN_VIEWMARKER.
In the command processors, the setting of the origins is
broken into two parts: one for UI-level access which includes
setting up undo, and one for low-level access which does not.
The undo/redo code itself of course uses the lower level.
Fixes: lp:1542018
* https://bugs.launchpad.net/kicad/+bug/1542018
It fixes the case when a tool sets up a menu and starts its event loop
waiting exclusively for menu events. If none arrived, the tool was stuck
in the loop forever.
Fixes: lp:1744915
* https://bugs.launchpad.net/kicad/+bug/1744915
The fix for this is a crude hack. The assertion is caused by the fact
that KICAD_MANAGER_FRAME is not a KIWAY_PLAYER. The only way to fix
this correctly is to derive KICAD_MANAGER_FRAME from KIWAY_PLAYER so
the window ordering can be corrected and the dialog can be called using
ShowQuasiModal().
Fixes lp:1744228
https://bugs.launchpad.net/kicad/+bug/1744228
Three interrelated issues:
1) Implement an undo/redo type for renames so that we know to delete
the old lib entry and add a new lib entry
2) When doing so (for the undo/redo OR the original edit), we must
make a copy of the 'original' LIB_PART which is used for revert, and
hand it to the new lib entry
3) When comparing a modified component tree item with the current item
we must also check for aliases.
Fixes: lp:1743857
* https://bugs.launchpad.net/kicad/+bug/1743857
Fixes: lp:1744371
* https://bugs.launchpad.net/kicad/+bug/1744371
Fixes: lp:1744373
* https://bugs.launchpad.net/kicad/+bug/1744373
This fixes the layer comboboxes, the copper zones properties
dialog, and the differental-pair icon in the htoolbar.
Fixes: lp:1741049
* https://bugs.launchpad.net/kicad/+bug/1741049
Gal mode: graphic cross-air cursor moved on items when clicking on & DRC error, like in legacy mode.
Make popup menu shown when right clicking on a DRC error item working.
OSX activates windows before telling the application, so there's
no good way to implement wxWidgets window enable/disable. This
patch keeps the quasi-modal dialog and its parent windows order
in the z-list fixed, and re-activates the quasi-modal dialog
whenever the OS activates the parent window.
This is meant as a stopgap for 5.0, with plans to add proper scaled
icons in the 6.0 cycle. A function KiScaledBitmap() is added, which
works like KiBitmap() except it scales the bitmap according to the
calling window's font size. Controls have been added to all the main
applications to let the user select scaling manually (these were omitted
from smaller apps that didn't already have a place to put them).
In addition, in eeschema only, the pixel height of the system font is
shown in the options dialog for diagnostics. This is only for collecting
feedback before 5.0 release from users with different displays and will
be removed.
Fixes: lp:1738875
This patch saves hotkeys to default file when a hotkeys file is
imported, so they remain persistent in future sessions.
Also, a few minor tidy ups (e.g. c++11 nullptr) internal to
common/hotkeys_basic.cpp.
- Add helper methods for DPI-independent sizes
- Make splitter sashes visible on macOS
- Remove SetSizeInChars() - wx has a built-in way that I missed
- DIALOG_CHOOSE_COMPONENT: DPI-indep splitter sizes
- DIALOG_RESCUE_EACH: DPI-indep default size and sensible HTML window
size
- COMPONENT_TREE: DPI-indep sizing
- DIALOG_FP_LIB_TABLE, DIALOG_SYMBOL_LIB_TABLE
If the client tool indicates it isn't happy for us to continue
(because, for instance, the user has cancelled the Zone Properties
dialog), then make sure we don't capture the mouse.
Fixes: lp: 1740780
* https://bugs.launchpad.net/kicad/+bug/1740780
The Windows drive specifier C: was being interpreted as a valid URL by
wxURI which was performing a URL comparison instead of a file comparison
which always failed in LIB_TABLE_BASE::FindRowByURI(). Change test for
URI to search string for "://" to determine if the comparison should be
a URI (string) comparison or a file (wxFileName) comparison.
Don't run final rescue unless the user performs the remapping.
Move the OSX dialog fix ups later so they come after some wxWindow
deferred processing.
Also provides a facility for doing a selectAll in each text field
so that tabbing between text fields behaves correctly.
Fixes: lp:1599157
* https://bugs.launchpad.net/kicad/+bug/1599157
Improve dialog layout and fix UI policy issues with all of the dialog
boxes in the common, 3D viewer, CvPcb, and Eeschema code paths.
Updated the use of component to symbol.
Replace all instances of "component" and "part" with "symbol" when
referring to schematic and library symbols.
Replace all instances of "component" with "footprint" when referring to
board and library footprints.
Minor dialog layout fixes to some of the dialogs impacted by the UI
string changes.
Remove redundant sizers from environment variable dialog.
Improve sizers and layout spacing of environment variable and environ-
ment variable edit dialogs.
Remove path from dialog box titles since environment variables are not
limited to file paths.
Improved help messages for both environment variable and environment
variable edit dialogs.
Restore highlighting of externally defined environment variables.
The remapping utility would create a new project specific library when a
symbolic link pointed to a library already defined in the symbol library
table. Now the comparison checks to see if the library path and file
name are actually a symbolic link if the file names are not the same when
the symbol library table entry is a file name rather than a URL. URLs
are simple string comparisons.
Disable the remap button after the remapping completed.
Remove some commented out code from the edit symbol in schematic dialog.
Fixes lp:1738634
https://bugs.launchpad.net/kicad/+bug/1738634
In theory there should be no polygons with empty outline, but as you see
there was at least one leading to a crash.
Fixes: lp:1739455
* https://bugs.launchpad.net/kicad/+bug/1739455
Don't apply missing-mouse-up logic to mouse-down events. The
logic depends on mouse-state, and the OS-synthesized mouse-up
and mouse-down events from a tap don't contain any state.
Fixes: lp:1737010
* https://bugs.launchpad.net/kicad/+bug/1737010
The polygon drawing routing in the OpenGL-GAL did
not plot polygons which are "closed", i.e. have a segment
from their last point to their first point, correctly.
That segment was omitted.
This commit fixes this bug.
The OSX implementation needs to be poked to update the
brightening / unbrightening during running of the
disambiguation menu. (FWIW, now that I've finally seen
it in action, it's a REALLY cool feature.)
Fixes: lp:1715440
* https://bugs.launchpad.net/kicad/+bug/1715440
The OPENGL_GAL::drawPolygon function and all functions using it
did not respect the isFillEnabled member set by
GAL::SetIsFill. This is fixed by this patch.
There were two problems in the triangulation caching
of SHAPE_POLY_SET:
First there was a double free:
While SHAPE_POLY_SET implements the copy constructor,
it did not implement the operator=, which resulted
in the default operator= being generated by the
compiler. The default operator= copied the member
m_triangulatedPolys, which is a std::vector of pointers.
So after operator= execution, there are two SHAPE_POLY_SET
having pointers to the same TRIANGULATED_POLYGONs, each
of them deleting them in their destructors. This led
to segfaults, because calling
TransformShapeWithClearanceToPolygon on a Zone
uses operator= to copy the contained SHAPE_POLY_SET.
The new SHAPE_POLY_SET then went out of scope and
deleted the cached triangulation within the Zone.
This first problem is fixed by implementing operator=
for SHAPE_POLY_SET.
Second, there was a memory leak: Calling
"CacheTriangulation" on a SHAPE_POLY_SET,
then changing the polygon and then calling
"CacheTriangulation" again led to
leaking the
triangulations generated in the first call.
This second problem is fixed by holding
the cached triangulations in a unique_ptr.
Moved the code handling text overbars to a single function
(ProcessOverbars()) to replace similar pieces of code trying to do the
same thing.
Fixes: lp:1735906
* https://bugs.launchpad.net/kicad/+bug/1735906
This target seems to only create empty makefiles, tested on linux. And I
can not find any references to it in any of the current CMakeLists. Lets
remove it.
Remove developer email addresses as requested on the developers mailing
list.
Update source contributor list.
Add place holders for symbol and footprint library contributors.
Remove unnecessary wxT() macros.
LAYER_NON_PLATED to LAYER_NON_PLATEDHOLES
LAYER_PADS_HOLES to LAYER_PADS_PLATEDHOLES
LAYER_PADS to LAYER_PADS_TH
and add comments and fix a render issue in gal mode for non plated holes.
Change action message color from "darkgreen" to "dark green" as the
former does not exist on windows and results in debug log warnings.
Change the information color from "grey" to "dark grey" for improved
contrast with the white backgrounds. This may need to configurable
on systems where the HTML window has a dark background color.
Don't translate HTML formatting strings.
Change the legacy schematic plugin to preserve illegal LIB_ID characters
when load schematics prior to version 4.
Check for illegal LIB_ID symbol names during project rescue. Rename and
rescue any symbols with illegal LIB_ID names.
Add static methods to LIB_ID object for testing for and fixing names
with illegal characters so there is uniform code for doing so.
Update the Eagle plugin symbol loader to fix symbol names using the new
LIB_ID fix illegal names method.
Fixes lp:1732236
https://bugs.launchpad.net/kicad/+bug/1732236
The NormalizePath() function always added a trailing separator when
normalizing environment variables. Now it checks an environment
variable for a trailing separator and only adds one if it doesn't
already exist.
May be a partial fix for:
Fixes lp:1733217
https://bugs.launchpad.net/kicad/+bug/1733217
Raise() invokes SetFocus() on Windows OS, leading to an API error
(check wxWindowMSW::SetFocus() in wxWidgets/src/msw/window.cpp as
of wxWidgets 3.0.2). In certain cases it leads to a crash.
SEARCH_STACK is a deprecated method for getting the list of paths where
one could look for a file. Instead it tries the project path and
environmental variables.
- renamed connectivity.[h|cpp] to connectivity_data [.h|.cpp] so that the file name matches the main class name.
- GetNetItems() now returns a vector instead of a list
Dotted, dashed and dash-dot lines are provided in
HPGL, PDF, PS and SVG plot outputs along with line
width and color formatting.
DXF format does not currently provide any dashed
line functionality
A bug in HPGL plotted is corrected. Previous HPGL
dashed line commands were incorrect, plotting all
lines as solid.
The GTK+ file dialog is case sensitive however it does support regular
expressions. Most of the file dialog wildcards are lower case so only
files with the lower case extensions will show up in the file dialog.
This code adds a method to convert file extensions of any case to the
appropriate (sch -> [sS][cC][hH]) regular expression on GTK+ builds so
all file extension case combinations will show up in the file dialog.
A note to developers: make sure to add a file extension when setting
when setting the default file argument. If you do don't set an
extension, the GTK+ file dialog will happily append the regular
expression as the file extension which is surely not what you want.
There are still a few known places (mostly gerbview) where there are
some complex wildcard code that has not been converted.
Fixes lp:1720542
https://bugs.launchpad.net/kicad/+bug/1720542
A copy and paste error was causing to footprint library table file name
and path to be shown in the symbol library table edit dialog. Factor
out code in PROJECT::FootprintLibTblName() to PROJECT::libTableName()
to handle both symbol and footprint library table names and create a
new PROJECT::SymbolLibTableName() method to fix the path and file name
in the symbol library table edit dialog.
Simplify some of the library editing code. There have been a few minor
changes in the behavior of the editor. If the current symbol is deleted
from the library, the next symbol in the library is not loaded. The
deleted symbol is cleared and the current symbol is empty.
Change component to symbol to align with the preferred terminology
discussed on the developer's mailing list.
Add separate update UI event for save library as to enable the menu entry
whenever a library is selected.
Change the select symbol list dialog to a single column using the LIB_ID
format LIB_NICKNAME:LIB_ITEM_NAME so that the selection can be parsed by
LIB_ID.
Add method to expand URI to LIB_TABLE_BASE.
Override wxApp::OnExceptionInMainLoop() in debug builds to make debugging
easier when an unhandled exception occurs in a wxUpdateUIEvent handler.
Change SCH_SCREENS::HasNoFullyDefinedLibIds() to return false when the
schematic has no symbols to prevent the remapping dialog from being run.
Use SCH_COMPONENT part reference when creating netlist rather than looking
up the library symbol.
Use GetPath() instead of GetFullPath() when initializing environment
variable table entries KICAD_SYMBOL_DIR and KICAD_PTEMPALTE due to
unexpected trailing path separator which was causing find libraries
by URI to fail.
Don't create a project symbol library table when there are no libraries
not found in the global symbol library table.
Don't add non-existent libraries to project symbol library table.
Clear symbol library table when loading a new schematic.
Minor remapping status message improvements.
Remove all instances of PART_LIBS and replace them with SYMBOL_LIB_TABLE
except for the CMP_TREE_MODEL_ADAPTER which requires updating as well.
Return the selected symbol using the LIB_NICKNAME:SYMBOL_NAME format when
viewer is launched as modal.
Add code to SYMBOL_LIB_TABLE object to allow enumerating symbol library
power symbols only.
Add a non-const version of LIB_TABLE::findRow().
Remove redundant information from Doxygen comments.
Check the if the schematic being loaded has been remapped (no symbol
library table nicknames defined) and remap accordingly.
Fix issues when resolving the library symbol links in the schematic
symbols.
Add cache library fallback when resolving symbols that cannot be
remapped.
Add remap complete message to remap dialog.
Add HasLibrary() helper to LIB_TABLE_BASE.
Fix issues when loading library symbols using symbol library table.
Add hashing function to symbol library table.
Improve the symbol panel message to warn user when cache library is
used to resolve symbol.
SHAPE_POLY_SET: fix crash in VertexCount when it is a empty poly set, or when params are incorrect.
minor other fixes:
warning in degug mode in dialog_dxf_import_base.cpp
pcb_painter.cpp: remove a useless debug line.
- Also makes the project and file import functions filetype dependent.
- The change from IO_MGR::KICAD to IO_MGR::KICAD_SEXP removes a conflict from a compile definition for KICAD when compiling kicad/import_project.cpp
- !! Eeschema uses Eagle plugin for loading schematics (i.e. it does not
use KiCad format anymore)
- Fixed build errors
- Fixed a few crashes
- Code formatting
Add EDA_DRAW_FRAME::isBusy() method to test if the current item is being
edited or a block operation is in progress.
Ignore undo and redo commands when editor is busy.
Fixes lp:1718656
https://bugs.launchpad.net/kicad/+bug/1718656
Make all trace environment variable strings upper case and prefix with
KICAD_TRACE_ for consistency.
Add Doxygen group for the trace environment variable strings.
The fix is now only for Windows, because it creates issues and does not fix the special keys issues on Linux.
This is due to the serious differences in event management between platforms.
fp viewer uses the default colors, because it has no color setup dialog.
class_colors_design_settings: remove not used members.
Fix issue in modedit: the color config was never read.
Previous implementation uploaded only vertices with indices less
or equal to the number of stored vertices, which is invalid when
the container become fragmented.
Fixes: lp:1712887
* https://bugs.launchpad.net/kicad/+bug/1712887
Include GTK+ version when appropriate so developers don't have to try to
figure out which version of GTK+ wxWidgets was built against.
Add KICAD_SPICE option status.
Create a new dialog to edit global and project specific symbol library
tables.
Add menu entries for new symbol library table editor in schematic editor
and symbol library editor main frame menus.
Add command event handler for symbol library table editor dialog to
SCH_BASE_FRAME so it is accessible from derived frames.
Fix bug in default environment variables initialization. A test for
existing user defined environment variables was preventing any new
default environment variables added to the list from being initialized.
- support for background color setting
- removed several global config settings (such as g_Drc_On)
- wrapped most of global config settings in PCB_GENERAL_SETTINGS class
- reorganized PCB general options dialog to clearly mark which options concern only the legacy canvas
- new GAL feature for legacy users: double-click (or E) to change track width available as an option.
Fixes: lp:1530543
* https://bugs.launchpad.net/kicad/+bug/1530543
Fixes: lp:1707145
* https://bugs.launchpad.net/kicad/+bug/1707145
- added TOOL_INTERACTIVE::resetTransitions()
- made protected and moved TOOL_BASE::setTransitions() to TOOL_INTERACTIVE
- TOOL_MANAGER calls TOOL_INTERACTIVE::resetTransitions() instead of
setTransitions()
This forces the compiler class specific features rather than borrowing
from the base class's std::string. In some cases prior to this,
wxString( std::string ) was being called rather than UTF8::operator
wxString() leading to garbled wxStrings.
Added function UTF8::wx_str() which is of great convenience also.
Implicit conversions still work as before, and hopefully more reliably.
This commit was too broad and not cognizant of the purpose of the class
UTF8.
Add MAYBE_VERIFY_UTF8() macro, which can trap non-UTF8 encoded strings in
debug builds.
Use that macro conditionally in class UTF8 to trap non-UTF8 encoded strings
being put into UTF8 instances.
Fix potential memory leak in both footprint and symbol library table
parsers when a duplicate library nickname entry exists.
Parse entire symbol library table before raising duplicate nickname
exception.
Improve the duplicate library table nickname error message to make
life easier for users to fix broken tables.
In the previous version the method did not work correctly
when an action was invoked from context menu. In such case,
the cursor position was obtained in the moment of selecting
the action, instead of using the right click location.
DIALOG_COMPONENT_CHOOSE displays footprint preview when pcbnew kiface
is available, but it crashed when it was not in the same directory
as the executable. Now it displays an error message that allows the
user to quickly identify the problem.
Fixes: lp:1695005
* https://bugs.launchpad.net/kicad/+bug/1695005
Allow partial library reads in libraries that support footprint per file.
This includes the KiCad and GEDA footprint libraries.
Allow for partially cached libraries rather than ignoring all valid files
when an error occurs.
The is a bug in the wxMimeTypeManager object that sets the wrong default
PDF viewer on Linux. Using wxLaunchDefaultApplication resolves the issue.
Remove angle brackets <> from error message as this causes issues with
controls that interpret HTML text.
Remove GetChars() from string formatting functions since it is not
required with wxWidgets 3 or greater.
Before the refactor library browser display Bezier curves correctly only
once, at other times they were just straight lines or crashed the
application.
All E'STRUCTS' are moved to common except for ERULES (which is
specific to pcbnew and needs its internal units), still in
pcbnew/eagle_plugin.{h,cpp}
In order to get rid of another boost dependency, this also changes
the parsing of the XML from Boost.PropertyTree to wxXml.
To replace boost::optional, an OPTIONAL_XML_ATTRIBUTE class has
been implemented. This could be replaced with std::optional when
C++17 is ready.
The footprint library cache handler would throw an exception on the
first error it encountered preventing all subsequent footprint files
from being parsed even if there was nothing wrong with them. This
commit queues errors until all of the footprint files in the folder
have been parsed.
Fixes lp:1416736
https://bugs.launchpad.net/kicad/+bug/1416736
- Allows grouping of matched components
- Bulk edit of components in a spreadsheet window
- User can choose to save / undo changes
- All changes are pushed to the undo stack in a single operation
- Export table to HTML / CSV output
The recent refactoring work to move zones from CPolyLine to
SHAPE_POLY_SET resulted in a reduction in pcbnew's python
capabilities. This change exposed SHAPE_POLY_SET to restore
that functionality (albeit with slightly different method names)
Fix incorrect frame deletion, only noticeable when eeschema is run in stand alone mode.
After selecting a footprint using the footprint viewer, the application cannot be closed.
Reason:
the footprint viewer ctor creates an instance (not shown) of a FRAME_PCB.
Unfortunately, this pcb frame was not deleted by Eeschema, in stand alone mode,
preventing the application to be closed because a frame was still active after closing the schematic editor frame.
Now the footprint viewer ctor delete this instance after use, if it was not previously existing.
After selecting a footprint using the footprint viewer, the application cannot be closed.
Reason:
the footprint viewer ctor creates an instance (not shown) of a FRAME_PCB.
Unfortunately, this pcb frame was not deleted by Eeschema, in stand alone mode,
preventing the application to be closed because a frame was still active after closing the schematic editor frame.
Add loading symbol library table code to schematic PROJECT object.
Fix minor issues with loading global symbol library table.
Add default symbol library path environment variable to the environment
variable list and change the variable name to KICAD_SYMBOL_DIR.
Add code to SCH_SCREENS to test if all library nicknames of the symbol
library IDs are empty.
Remove unnecessary KICAD_USE_SCH_IO_MANAGER build option.
Independent drawing functions (that don't expect any particular state to
be set up fo them) on the GAL need to reset the GAL properties they
use. This adds GAL::ResetTextAttributes() to make this easier.
This is important, as failing to reset mirroring can cause asserts in
OpenGL.
This is used in the Ruler tool (which previously did it one attribute at
a time) and also the Arc layout assistant, which previously failed to
reset mirroring.
Also reset on GAL construction, as these members appear to be
uninitialised.
Factor out the FP_LIB_TABLE specific content from FP_TBL_MODEL into a new
LIB_TABLE_GRID class that can be used for any library table grid mix in.
Create new FP_LIB_TABLE_GRID object for the footprint library edit dialog.
Add method GetEnvVariables() to return any environment variables found in
a LIB_TABLE object.
This is required as the OpenGL GAL doesn't support mirrored
text, and if the state is not cleared after painting other mirrored
text, this is what is attempted.
Fixes: lp:1677210
* https://bugs.launchpad.net/kicad/+bug/1677210
- DIALOG_CHOOSE_COMPONENT has footprint select widget
- FOOTPRINT_SELECT_WIDGET
- FOOTPRINT_CHOICE widget (customized wxComboCtrl)
- FOOTPRINT_FILTER class
- FOOTPRINT_INFO rework:
- FOOTPRINT_ASYNC_LOADER to load without freezing UI
- Rewrite loader threads as queue-driven thread pool
- Make FOOTPRINT_INFO available via kiway
- FP_LIB_TABLE::PrefetchLib
- Access to global fp-lib-table via kiway
- SYNC_QUEUE threadsafe queue template
- Remove KICAD_FOOTPRINT_SELECTOR build option
Removes the need of using the legacy code in polygon/PolyLine.{h,cpp},
refactoring all CPolyLine instances with SHAPE_POLY_SET instances.
The remaining legacy methods have been ported to SHAPE_POLY_SET;
mainly: Chamfer, Fillet, {,Un}Hatch.
The iteration over the polygon vertices have been simplified using the
family of ITERATOR classes.
The executable name constants are only used by two files, they do not
have to be in common.h.
Also converted to const wxString for better type-safety and removed
old-style wxT macros.
This function is called only from three sites, it doesn't need to be in
common.h.
The implementation was already in systemdirsappend.cpp, so a matching
header was created for it.
This reduces the visibility of the function to only the files that need
it and slightly shrinks common.h.
The global ::LockFile() function is used in a single place, but it's in
common.h, so visible to all files.
The GetKicadLockFilePath function is used in only two places, and one of
them is LockFile.
This commit puts them both in a separate header, so they're only visible
to code using them.
The implementation of GetKicadLockFilePath is moved to lockfile.cpp,
where LockFile already was.
Also removed a (large) handful of wxT macros, which aren't needed any
more and make code less readable.
The currentTarget member of OPENGL_GAL is not initialised, but the
currentManager member is.
This commit uses SetTarget to initialise both target and manager to a
consistent state at construction.
The zone creation in DRAWING_TOOL was a complex event loop whici
simultaneously managed the event handling, construction of the preview
polygon and the creation and commiting of the zone, all in the same
scope. This has been broken into several pieces:
* POLYGON_ITEM preview item, used to preview the polygon in progress
* POLYGON_GEOM_MANAGER is a class that collects points from user input
and used them to describe a polygon's geometry, including calculation
of 45-degree constrained leader lines
* ZONE_CREATE_HELPER is a class which deals with creating zones based on
geometry from a geometry manager and parameters from the DRAWING_TOOL
* The (much simpler) event loop in DRAWING_TOOL drives the
POLYGON_GEOM_MANAGER. With a minor refactor, this loop can be reused
in future for other polygonal tools if wanted.
The polygon preview now has a translucent fill which makes it easier to
visualise the zone.
This also adds the Close Zone Outline and Delete Last Corner actions as
part of the new event loop.
Fixes: lp:1663885
* https://bugs.launchpad.net/kicad/+bug/1663885
Fixes: lp:1667885
* https://bugs.launchpad.net/kicad/+bug/1667885
This uses the two-point geometry manager to split the logic of the ruler
geometry and the preview item display. This allows the ruler to use that
manager's angle snap feature.
The motivation here is to concentrate display options in the GAL display
settings, ready for removal of legacy canvases. Instead of having the
property as a member of the DRAW_FRAME, with the GAL canvas retreiving
it from there, it is now in the GAL_DISPLAY_OPTIONS struct, and both GAL
and legacy get it from there.
The options for setting cursor shape are then moved out of the general
options dialog, and into the GAL display options widget, where they can
be used in all GAL-aware programs.
GAL cursor shape works on GAL, but not legacy, so the option is now
available on OSX (but only affects GAL, and is labelled as such).
This gives a bit more space to the GAL options in the left panel
Also tidy up some code style and unnecessary default arguments in the
GAL display planel widget.
This makes it clearer when a tool is active, otherwise interactive tool
effects like auto-pan can come as a surprise when the cursor is forced
to display all the time.
A new items is added to the GAL display options (and the dialog), and a
hotkey (Ctrl+Shift+x) is added to toggle it.
Fixes: lp:1673633
* https://bugs.launchpad.net/kicad/+bug/1673633
This adds the microwave tools to GAL in Pcbnew as a new tool:
MICROWAVE_TOOL.
Some new preview items are introduced to support this:
* TWO_POINT_GEOM_MANAGER for managing construction of two-point
geometries, such as that used to construct the inductor.
* CENTRELINE_RECT_ITEM a preview item to draw ractangle with a given
aspect ratio along a line (specified using a TWO_POINT_GEOM_MANAGER)
PCB_TOOL gets a generic event loops which should be useful for more
than just microwave tools:
* doInteractiveItemPlacement() - handles event loops that wait for a
click, create an item on click and then allow moving it
around/flipping, etc.
Fixes: lp:1531323
* https://bugs.launchpad.net/kicad/+bug/1531323
This adds a richer overlay to the arc-by-three-points tool in Pcbnew,
including more guide-lines and a live display of radius and angle.
Also included is ability to go back to the previous step (if setting end
angle, you can go back to setting start point, etc) using Backspace, and
Ctrl snaps the start/end angles to 45 degree multiples.
This adds new classes
* MULTISTEP_GEOM_MANAGER: represents a generic "geometry manager" that
builds up some geometrical construction based on a sequence of points.
Used by:
* ARC_GEOM_MANAGER: handles the logical flow of constructing an
arc by centre-point, set radius, set angle. This moves the logic out
of the Pcbnew DRAWING_TOOL event loop in drawArc().
* ARC_ASSISTANT: graphical overlay to communicate current arc shape to
the user during the drawing process
Add typedef for wxCoord to wx.i to enable usage of methods like
EDA_RECT.Inflate.
Added id.h to pcbnew.i to expose window toolbar identifier names.
Added Refresh() and WindowZoom() to pcbnew_scripting_helper.
The primary motivation here is to allow other GAL canvas users (eg
Modedit, and soon Gerbview) to be able to easily modify GAL canvas
options.
For now, this doesn't change the display properties dialog in
appearance, but if more GAL options are added, it might need a bit of
tweak and maybe tabs or similar, like Eeschema preferences.
- Pull out compound widget bits into FOOTPRINT_PREVIEW_WIDGET
- Move all pcbnew-specific bits *inside* pcbnew; implementation should
be private for users
- Make a few class members and inner types private
This allows to measure between features on a PCB. It uses a preview
EDA_ITEM in common, but due to the use of the IDs, it's currently
Pcbnew/Modedit only.
This also adds several "utils" for graphical functons useful when
drawing preview items on GAL canvases.
Fixes: lp:1467313
* https://bugs.launchpad.net/kicad/+bug/1467313
This simplifies the (already simple) SELECTION_AREA class. It is also
moved into KIGFX::PREVIEW and put in the common library, where it can be
reused by other GAL-aware tools (not just in Pcbnew) in future.
This introduces SIMPLE_OVERLAT_ITEM, which is an abstract EDA_ITEM,
designed for use as an overlay for assisting interactive tools.
The item is drawn only on the GP_OVERLAY layer, and sets the fill,
stroke and line properties before calling a virtual function to draw the
shape, which will depend on the implementaiton of the derived class.
The motivation here is to simplify and unify basic overlays used when
in interactive tools. It is not designed to be the base class of all
possible overlays - more complex ones would be more clearly represented
as their own derivative of EDA_ITEM.
Applications of this class can include: zoom/select rectangles, zone
polygon previews, geometric shape helpers, and so on.
When drawing polylines using SHAPE_LINE_CHAIN, the polyline is always
was drawn closed in GAL and open in Cairo, regardless of the state of
SHAPE_LINE_CHAIN.
This refactors COMPONENT_TREE_SEARCH_CONTAINER into a Model-View-Adapter
architecture comprising:
- eeschema/cmp_tree_model.h
- CMP_TREE_NODE: Base class representing a searchable library
set with scoring and sorting
- CMP_TREE_NODE_UNIT
- CMP_TREE_NODE_ALIAS
- CMP_TREE_NODE_LIB
- CMP_TREE_NODE_ROOT
- eeschema/cmp_tree_model_adapter.h
- CMP_TREE_MODEL_ADAPTER: mediator between wxDataViewCtrl (via
wxDataViewModel) and CMP_TREE_NODE*
+---+ +------------------+
+---+ Generates | A | | VIEW |
| M | from libs | D | wxDataViewModel |------------------|
| O | <---------- | A | <------------------> | wxDataViewCtrl |
| D | | P | |------------------|
| E | <---------> | T | <------------------- | wxTextCtrl |
| L | UpdateScore | E | UpdateSearchString() |------------------|
+---+ | R | | |
+---+ +------------------+
Representing the data with a proper model allows the wxDataViewCtrl to
be updated in bulk, which is significantly faster than the old method of
populating it one item at a time. This also adds flexibility if more
data is to be added in the future (which may come in handy with the
upcoming .sweet format, as that adds more ways components can be related
to each other).
Replacing the wxTreeListCtrl with a wxDataViewCtrl also significantly
reduces the general GUI quirkiness, as wxDataViewCtrl is much more well
behaved.
This is the right implementation of the commit b25ded4d.
Previously if there were tools launched from another tool,
the settings could be stored in a wrong TOOL_STATE object.
BOARD::GetBoundingBox() now directly calls BOARD::ComputeBoundingBox()
and there is a new method BOARD::GetBoardEdgesBoundingBox() used for
call sites that needed to use ComputeBoundingBox( true ) in the past.
This allows COMMON_TOOLS to implement ZoomFitScreen without knowledge
of the BOARD class.
There are times, when TOOL_MANAGER has to force cursor position
to make tools work as expected (e.g. when popping up a menu,
so tools get the right click position instead of current position
pointing to an entry in the menu).
If another tool is invoked, VIEW_CONTROLS settings have to be stored
in the TOOL_STATE object. In such case, it is necessary to revert the
force cursor setting when saving VIEW_CONTROLS settings.
Fixes: lp:1668712
* https://bugs.launchpad.net/kicad/+bug/1668712
Init'ing static wxBitmaps in the global scope happens before the GUI is
ready, which segfaults, at least on GTK+. This can happen in, for
example, the Python module. In normal use, the singletop/kicad
loader has initialised the GUI first, so it doesn't manifest there.
The introduces INDICATOR_ICON, which is a very simple class holding a
bitmap that can toggle on or off.
The ICON_PROVIDER class then provides icons to INDICATOR_ICONS, which
means the class can be used for more than just row indicators.
A default row icon provider is also provided for use in the standard row
selector.
This introduces COLOR_SWATCH, which is a reusable
widget that shows a color swatch and can invoke the colour picker
when duble/middle clicked.
It uses it's own wxCommandEvent to signal the change.
This makes the layer widget simpler internally, and also allows other
code to show identical swatches if needed.
SELECTION now holds EDA_ITEMs not BOARD_ITEMs so various places had to
change to casting the selected items to BOARD_ITEMs.
Fixed compilation warnings on clang (Tom)
Call UseDrawPriority( true ) after creating GAL to enable.
VIEW::Add() gets a new optional argument to specify the draw order
when adding an item. If the new argument is left default, the draw
order will increment with each call of VIEW::Add().
Fix std::bind calls after change to VIEW::Add
get_value_or() is considered deprecated, but still works in the newest
boost (1.63). On the other hand, value_or() is not available in some
versions that are still used by major distros.
jean-pierre charras
Maciej Suminski
Seth Hillbrand
Jeff Young
Wayne Stambaugh
Steven A. Falco
Shivpratap Chauhan
Andrzej Wolski
Simon Richter
Carsten Schoenert
Kristoffer Ödmark
Jon Evans
Tomasz Wlostowski
Michael Geselbracht
Russell Oliver
Martin Sivak
Chris Pavlina
Camille
Dan Weatherill
Mark Roszko
Oliver Walters
Bernhard Stegmaier
Andreas Buhr
Henner Zeller
Nick ?stergaard
Julius Schmidt
Baranovskiy Konstantin
Marvin Schmidt
Oliver Walters
Kevin Zheng
Michael Kavanagh
Mathias Grimmberger
Dick Hollenbeck
Fabrizio Tappero
Alejandro García Montoro
Eldar Khayrullin
Miles McCoo
Konrad Beckmann
Simon Wells
John Beard
Cirilo Bernardo