8314251fa1
CADSTAR PCB: Force white silkscreen and green soldermask
...
We don't know the actual colour from the design, but this is the most
common used in the industry.
2021-11-05 17:13:02 +00:00
b2db24f275
CADSTAR PCB: Don't invert Text Angle for mirrored text
...
It matches the original cadstar when we don't invert
2021-10-30 18:14:23 +01:00
4fe025909d
Fix centered rotated text in Pcbnew Eagle importer.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9466
2021-10-27 14:38:42 +01:00
e12f9a194d
Fix Eagle arc importing.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9466
2021-10-27 02:36:43 +01:00
0c99c99e12
Do not assign priorities to rule areas
...
As noted by @jeffyoung, we shouldn't set priorities to rule areas as
this can expose unexpected issues
Related to https://gitlab.com/kicad/code/kicad/-/issues/7776
2021-10-26 11:16:04 -07:00
5b9519da6c
Fix arc formatting in Fabmaster import.
2021-10-26 17:52:10 +01:00
d44e0ab765
Limit use of non-copper layers
...
When importing, we should not use Eco1 for other purposes as the
importer uses it to place unknown layer objects. We also need to avoid
placing objects on the courtyard layers that do not relate to the layer
purpose in DRC
Fixes https://gitlab.com/kicad/code/kicad/issues/9442
2021-10-22 12:31:11 -07:00
57f907f6e7
Make sure PCB_PARSER is fully initialized between footprints.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9424
2021-10-19 17:14:04 +01:00
10ac675905
Fix shadowing
2021-10-18 09:00:24 -07:00
99442350a4
CADSTAR PCB: Fix loading of arc tracks following recent PCB_ARC changes
...
We no longer have any knowledge of the original start/end of the arc,
since SetArcAngleAndEnd swaps the start and end to ensure the arc is
always clockwise at the end.
Adds a method EDA_SHAPE::EndsSwapped() to notify whether the start/end
point of the shape were swapped.
2021-10-17 17:57:51 +01:00
e867a4fd27
CADSTAR PCB: Fix Zone fill priorities
...
The algorithm now correctly determines fill priorities when the zone
outlines are close together and within the minimum clearance between
zones.
2021-10-16 21:50:56 +01:00
f9861b4a6c
Finish arc rework and push out to file formats.
2021-10-15 12:45:43 +01:00
9b9e379aa0
Overhaul arc internal model to not over-specify information.
2021-10-15 12:45:43 +01:00
8b08c9e53f
Shorter names before things get out of hand.
...
Also, remove comments indicating CURVE is a Bezier. Just call it a
BEZIER.
2021-10-15 12:45:43 +01:00
a41944020d
Push most of PCB_SHAPE impl down in to EDA_SHAPE.
2021-10-15 12:45:43 +01:00
43e59b0ea7
CADSTAR PCB: Correctly handle associated pad ids and PCB Only pads
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9372
2021-10-11 18:30:20 +01:00
7a71ebf9ac
CADSTAR PCB: Load all three net properties into a single Netclass
...
The final netclass name will be a bit long but it will allow for custom
DRC rules to individually target each of the three properties available
in CADSTAR:
- Route Code (which specifies width of the track in min, max, opt)
- Net class (only used in signal integrity analysis)
- Spacing class (for specifying clearance requirements between classes)
2021-10-10 22:16:08 +01:00
ac3ade874e
CADSTAR PCB: Set Copper-to-Hole clearance as 0
...
Testing suggests that CADSTAR doesn't actually have any clearance to the
hole (other than electrical clearance to the barrel of the padstack/
viastack).
This removes a large amount of DRC violations on imported designs.
2021-10-10 00:20:13 +01:00
eb7d0fdf8a
CADSTAR PCB: Use board clearance + additional isolation as zone clearance
...
Copper-to-copper clearance is too onerous and results in large amount
of DRC errors for the majority of imported designs.
2021-10-10 00:18:36 +01:00
f4ff01a5ab
CADSTAR PCB: Copy default netclass settings when creating new ones
...
Ensures that the global clearance is preserved in the newly created
netclass.
2021-10-09 23:10:55 +01:00
8f74085ca4
CADSTAR PCB: Handle older boards without construction layers
...
Use KiCad default stackup for older CADSTAR boards that do not
define any dielectric layers between the electrical layers.
Also fix default stackup calculation to ensure finished board thickness
is 1.6mm
2021-10-09 21:26:16 +01:00
33a3cfc87b
CADSTAR PCB: Update Board Design Settings to notify that a stackup exists
...
Also update thickness of the PCB
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9307
2021-10-09 20:33:14 +01:00
e80a1c2679
CADSTAR PCB: Don't load items on invalid layers
...
This was happening in two cases:
- Loading documentation symbols (CADSTAR on purpose defines these in an
invalid layer)
- When an item was in a "layer set" such as ALLELEC or ALLLAYER - need to
make sure we remove the copper layers that are not active in the design
2021-10-09 20:07:23 +01:00
677166f0b8
CADSTAR PCB: Rule Areas have zero width
...
Cadstar areas have a line width but this is only for display purposes.
Instead CADSTAR uses the center line when determining whether a DRC
violation occurred.
2021-10-08 21:27:32 +01:00
2dfbd42be6
CADSTAR PCB: Legacy netclass and design settings loading is required
2021-10-08 20:48:10 +01:00
ae0229b7c9
CADSTAR PCB: Add imported nets to the imported netclass.
2021-10-08 20:25:09 +01:00
58fc4f512d
CADSTAR PCB: Don't create zero width tracks
...
Fixes a bug in the route offsetting part of the import
that was resulting in zero-width tracks being imported.
2021-10-08 20:25:09 +01:00
16b61e47cd
CADSTAR PCB: Clear arcs from polys before boolean ops (e.g. zone fills)
2021-10-08 20:25:09 +01:00
fb588da875
CADSTAR PCB: Fix loading of thermal relief gap in zones
...
We were loading as solid fill when the relief gap was exactly the
same as the minimum width.
Also we can do better than just load as solid fill when it is smaller:
we can instead just use the minimum width and at least it still will
have thermal reliefs.
2021-10-08 17:39:08 +01:00
cb47bf25c0
CADSTAR PCB: Actually load the original route code as a KiCad NETCLASS
...
We weren't actually loading it into the design settings even though
everything else was already being correctly loaded.
2021-10-07 22:13:06 +01:00
9a8d1246cc
We don't keep a CHANGELOG.TXT
...
Direct interested readers to AUTHORS.TXT instead.
2021-10-05 19:46:53 -07:00
548e5f49bd
Clean up unused variable usage
...
Unused variables in function calls can be commented out. Unused
return variables get a new routine `ignore_unused()` that silences the
warnings with zero overhead.
2021-10-05 10:00:30 -07:00
f606679164
Proper numeric sorting for intersheet refs.
...
Also expunges the horrifically named std::remove and std::remove_if
(neither of which remove anything).
2021-10-01 18:29:21 +01:00
6b25099df7
Read/write lock status for fp text.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9325
2021-09-25 20:37:56 +01:00
04aff93248
Eagle doesn't use netclass clearance so make them the board clearance.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/2442
2021-09-20 21:31:19 +01:00
f66654247a
Read netclasses when importing Eagle projects.
...
Also creates a DRU file with the various netclass-to-netclass
clearance rules from the Eagle clearance matrix.
Fixes https://gitlab.com/kicad/code/kicad/issues/1774
2021-09-20 12:38:56 +01:00
b84d1456d5
KIFACE_I -> KIFACE_BASE.
2021-09-14 23:45:14 +01:00
625e56676a
Add progress reporting to CADSTAR Schematic & PCB importers
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8685
2021-09-11 17:50:19 +01:00
d2bff137ee
.kicad_pcb file: fix incorrect keyword stored for some (not all) PAD properties.
...
( a copy-paste error? )
Fixes #9102
https://gitlab.com/kicad/code/kicad/issues/9102
2021-09-06 09:15:18 +02:00
ee5f9034f7
pcb parser: ensure the parser is reinitialized before parsing a new fp file
...
Because the same parser is used to read all footprint files of a library,
the parser must be reinitialized (internal variable cleared) before reading
a new file, otherwise the previous parser state is applied to the next file.
Fixes #7627
https://gitlab.com/kicad/code/kicad/issues/7627
2021-08-26 19:38:20 +02:00
2b3477ca28
Handle RGBA conversion to hexadecimal format for wxWidgets 3.0
2021-08-25 02:40:17 +01:00
a02ea1609b
A more robust solution to the 3D color opacity issue.
...
(This also fixes a typo in the previous fix that assigned the opacities
backwards.)
2021-08-24 11:24:25 +01:00
e6ca9837a2
Clear numbers from non-numberable pads and don't run DRC on them.
...
This was also the last straw on the misnamed PAD::GetName() and
PAD::SetName(), which are now PAD::GetNumber() and PAD::SetNumber().
Fixes https://gitlab.com/kicad/code/kicad/issues/9017
2021-08-24 01:03:06 +01:00
21f2b235ce
Rework stackup colors a bit to support opacity for 3D viewer.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9012
2021-08-23 20:00:17 +01:00
fec34e8dd8
Get rid of an extraneous layer parameter.
...
Also adds a bit of nullptr safety.
2021-08-23 20:00:17 +01:00
41619ebbe2
Decouple PROGRESS_REPORTER interface from implementations.
2021-08-14 21:05:49 +01:00
54942a1401
Fix typos that would result in fp zone setting written into pads.
2021-08-08 18:12:29 +01:00
46bdce2747
Don't allow pads in groups in the board editor.
...
Bad stuff happens, including crashes.
2021-08-04 13:55:42 +01:00
0f5a8f87d3
Add writing of pad primitive polys with arcs, and fix a bug in reading.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8827
2021-08-01 10:47:00 +01:00
6aaf4413b3
Fix kicad_string.h / string.cpp mismatch.
...
They don't define a KiCad string class, so the header file name was
somewhat misleading. But the fact that they didn't match definitely
made coding more difficult.
2021-07-29 16:03:25 +01:00
f221220fe2
Rename layer ids file.
...
It hasn't had anything to do with colors or visibility for some time
now.
2021-07-29 16:03:25 +01:00
46338403e7
Unwrap some std::library typedefs.
2021-07-28 22:16:38 +01:00
369d813a32
Pass std::string by reference instead of on the stack where applicable.
2021-07-27 13:30:05 -04:00
37b200cb3e
Pass wxString objects by reference instead of on the stack.
2021-07-27 08:41:27 -04:00
8fd83cbb95
Pass wxPoint objects by reference instead of on the stack.
2021-07-26 15:35:33 -04:00
373f0335c8
Convert Altium radial dimensions to leaders.
...
This is because we don't yet support radial dimensions.
Also fixes a bug where we fail to read an Altium circular track. We
now convert it to a pair of 180-degree arcs.
Also fixes a bug where we were failing to import prefixes on linear
dimensions.
Fixes https://gitlab.com/kicad/code/kicad/issues/8789
2021-07-24 14:25:59 +01:00
531f5480a7
Reduce line-breaks and increase SNR.
2021-07-24 14:25:59 +01:00
04b9b15255
Fix copy/paste error.
2021-07-23 01:11:22 +01:00
a16b85db67
Read/write group locked state. Show locked state in dialog & statusbar.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8796
2021-07-22 12:49:30 +01:00
0fb864d596
Pull some name changes back from 7.0 to ease merging.
2021-07-21 20:58:59 +01:00
af90d47edc
Altium: Fix calculating third arc point from uninitialized memory
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8671
2021-07-20 19:13:32 +00:00
cf00319c85
More NULL expunging.
2021-07-20 07:27:18 -04:00
e61822c9e0
Naming conventions and a bug fix on arc points.
2021-07-19 13:17:12 +01:00
56412cc843
PCB_TEXT: remove "hide" option, because they are never hidden.
...
- avoid write "hide" option in file
- always return true when calling IsVisible()
Fixes #8806
https://gitlab.com/kicad/code/kicad/issues/8806
2021-07-18 14:58:21 +02:00
01d3a88faa
Allow unnamed embedded step files in altium boards.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7898
2021-07-10 16:37:45 +01:00
17ab2c7197
.kicad_pcb files: minor enhancements: add missing new lines in file.
...
No actual change, this is only a cosmetic change.
2021-07-07 11:44:11 +02:00
576d70fab0
Fix file format syntax of arcs in polygons
...
No format bump as there is no way to create these files yet.
2021-07-04 12:10:59 -04:00
0116e9c94e
Silence Altium polygon-needs-at-least-3-verticies warning.
...
Too many Altium files appear to have these. Just ignore them instead.
Fixes https://gitlab.com/kicad/code/kicad/issues/8183
2021-07-04 11:02:59 +01:00
ab38dfd7ae
Fix build
2021-07-03 19:47:58 -04:00
77b68a827c
Remove unused variable
2021-07-03 19:20:54 -04:00
4f4deece6d
ADDED support for reading/writing arcs in polys
...
This adds support for reading and writing arc elements in polygons.
2021-07-03 19:37:50 +00:00
bc65b7173f
Don't use SCH version number when inspecting PCB files.
2021-07-03 15:24:54 +01:00
eff75b630f
Get rid of anonymous struct typedefs
...
We are using C++14 where there is no reason for this and is banned in C++20 under P1766R1. MSVC generates a warning under C++14 as a reminder.
2021-07-01 18:28:41 -04:00
6810912f09
Refuse to load schematics from the future.
...
Also fixes a bug where an empty window would get left when loading
a file from the KiCad manager window errored out.
Also fixes a bug where we were getting the wrong exception because
we were rethrowing the type-casted one (rather than just calling
throw).
Fixes https://gitlab.com/kicad/code/kicad/issues/8604
2021-06-30 18:32:07 +01:00
5cac8afe1d
Remove long-dead revision support for LIB_IDs.
2021-06-30 13:12:57 +01:00
a1dfc36233
More error message regularization.
2021-06-29 01:08:26 +01:00
062c4fda62
More error message regularization (and translatability improvements).
2021-06-28 00:45:24 +01:00
4aa8318dc2
More error message regularization.
2021-06-27 14:24:02 +01:00
0dfb5fcaf9
Error message cleanup.
...
wxString::Format is redundant in a wxLogXXX call.
Error messages should generally be translatable.
Error messages should use generally consistent sentence forms.
2021-06-26 22:53:24 +01:00
5c21f93803
Consistency in progress and error messages.
2021-06-26 13:23:43 +01:00
e50eaed7b9
altium: Improve parsing of UTF-8 data
...
This is an implementation based on d4ccec05 from @fxtentacle
2021-06-26 13:58:56 +02:00
e6c047896c
altium: introduce progress reporting, fix possible nullptr when reading 3D models
2021-06-26 12:54:31 +02:00
81fc710a5d
Use consistent terminology.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8681
2021-06-26 10:11:41 +01:00
8502fd6877
Divide-by-zero safety.
2021-06-24 12:18:22 +01:00
a8028e3bd1
Fix uninitialized variables.
2021-06-24 12:18:22 +01:00
b532ecec52
Fix ALTIUM_RULE_TOKEN qa test failure
2021-06-24 05:58:24 +00:00
50eea4f487
Import progress dialog for FabMaster.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/5315
2021-06-24 00:21:37 +01:00
5fa5a73c6d
File open/import progress dialogs.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6864
Fixes https://gitlab.com/kicad/code/kicad/issues/2166
2021-06-23 23:55:54 +01:00
1a35d8ba5d
Setup layer mapping when importing Eagle library.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7891
2021-06-15 19:20:17 +01:00
4418707e5e
Add a few more overbar syntax conversion calls.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8606
2021-06-15 13:09:18 +01:00
096e342386
Prefix TRACK, ARC and VIA.
2021-06-11 22:07:02 +01:00
ade38f48bc
Add conversion from old `~...~` to new `~{...}` notation
2021-06-11 18:40:57 +00:00
16b0147af8
Prefix DIMENSION types.
2021-06-11 17:59:44 +01:00
5f1e9bc8a7
Fix typos in source code
2021-06-10 01:24:15 +00:00
f968fc8719
Fix source comment / documentation typos
2021-06-09 19:32:58 +00:00
6e01ce84b9
Break out eda_item_flags.h, fix the typedef to std::uint32_t, fix some signed vars
2021-06-08 19:12:30 -04:00
2aaec31832
Don't put up "old version" warning for gerbview-generated PCBs.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8574
2021-06-08 22:12:44 +01:00
9268340dcc
Kick wx.h out of pcbnew
2021-06-07 18:38:51 -04:00
022dd6072c
Add utility method to resolve symlinks
...
The same logic block to resolve possible symlinks exists in 5 different
places now. This change moves this duplicated code to a static member
function of WX_FILENAME instead.
2021-06-07 20:59:59 +00:00
83080b67f5
Fix build on wx 3.0
2021-06-06 20:21:21 -04:00
5bb6f8c5e3
hashtables.h doesn't need eda_item.h
2021-06-06 19:11:35 -04:00
10e60acf34
Clean up including of board_design_settings.h
2021-06-06 15:03:42 -04:00
581ba21865
Remove wx includes out of cadstar_archive_loader.h
2021-06-06 09:28:02 -04:00
06e967354f
Fix symlink read-/write-through code
...
Use `realpath(3)` instead of `readlink(3)`, which offers support for
relative and absolute symlinks alike, since all symbolic links will be
resolved to the absolute path of the linked-to file.
Fixes #8082
2021-06-05 14:22:50 +00:00
0c879eead3
Cleanup headers in pcbnew pcad importer
2021-06-04 01:28:40 +01:00
4f05262705
Cleanup includes in board.h and footprint.h
2021-06-03 20:19:52 +01:00
23f8851409
Remove pcb_group include from board header
2021-06-03 20:03:31 +01:00
af2707929d
Don't leak a wx header via eda_item.h
...
Turns out this provided the translation header globally :D
2021-06-02 19:18:48 -04:00
eeb405c196
Cleanup some more excess math/util includes
2021-06-02 00:50:46 -04:00
cf2bb5692a
Remove the wxLog calls from math/util.h for now
...
This was leaking windows headers and partial wx headers to 1084 compilation units......
This also means math/util.h is leaking to 1084 compilation units which seems a bit high too.
2021-06-01 18:44:22 -04:00
65fee5b2ec
Clear m_out pointer at end of save
2021-06-01 18:44:22 -04:00
208dd5cbd5
Cleanup string handling in fabmaster import
...
Avoids round-tripping std::string->c_str->std::string and makes a few
auto references explicit
2021-06-01 13:54:34 -07:00
5c543b62c5
Cleanup: Use make_unique for the legacy plugin board deleter
2021-05-30 20:56:44 -04:00
a7d1ef9927
Fix some more uninitialized warnings
...
From PVS Studio
2021-05-30 20:05:37 -04:00
ed2f2257ce
Remove footprint locking in the footprint editor.
...
(It doesn't make any sense there as the position is always {0, 0} in
the editor.)
For discussion see:
https://kicad.zulipchat.com/#narrow/stream/258851-Developer-Chat/topic/Is.20there.20a.20reason.20why.20kicad.20now.20seems.20to.20lock.20pads.3F
2021-05-18 23:14:17 +01:00
810a717e4e
Remove unused NETINFO_MAPPING member
...
The legacy plugin no longer implements saving, so no net code renumbering
is needed.
2021-05-17 11:54:06 +00:00
916a15793f
Fix some OSX compiler warnings
2021-05-09 12:59:57 +01:00
c7345096f8
Use wxFFileInputStream explicitly when loading xml documents
...
wxFFile (FILE, buffered) is better than wxFile (syscalls)
2021-05-03 19:39:56 -04:00
3a9a85b373
Enum class PAD_PROP_T
...
Renamed such that it does not affect python
2021-05-01 10:58:30 -04:00
03cf2b517f
Enum class PAD_ATTR_T
...
Renamed such that python stays the same
2021-05-01 10:51:54 -04:00
b243c2280d
enum class PAD_SHAPE_T
2021-05-01 08:22:35 -04:00
21fde9b629
enum class PCB_SHAPE_TYPE_T
2021-04-30 22:36:12 -04:00
1e8b23402c
Bump board format version for locked syntax fix.
2021-04-24 19:11:17 +01:00
e27733587d
Fix 2 minor Coverity warnings.
2021-04-23 19:57:36 +02:00
ecd9bf696e
Be consistent about using nullptr instead of 0
...
0 can be too easily overloaded into an int, so ensure we use nullptr
when we mean pointers.
2021-04-22 22:20:34 +01:00
61ce1b35ec
R/W dimension lock flags and update format for all lock flags.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8255
2021-04-21 19:59:27 +01:00
a7f956581c
Pcbnew: fix board file formatting issues.
...
This does not required a board file version change. All of the changes
are white space formatting fixes and improvements.
2021-04-20 10:18:31 -04:00
2d9bac804c
Pcbnew: minor fix: remove extra spaces when outputting pad primitives section.
...
No format change.
2021-04-18 15:25:14 +02:00
433e148e08
Move some string formatting functions out of base_units
...
Keeping them in base_units means that we can't introduce
any dependence on these functions to anything that needs to
compile without one of the unit defines (EESCHEMA, PCBNEW, etc)
2021-04-14 23:21:10 -04:00
edb2136a0d
CADSTAR PCB: KiCad's minimum permitted Through Drill is 0.0508mm(2mils)
2021-04-12 20:25:05 +01:00
a3196a11a7
CADSTAR PCB: Be more specific with "allow thermal pads" DRC hack
...
Only tag the footprint as such when we know it has overlaping copper
over the pads with different pad numbers
2021-04-12 20:25:05 +01:00
b5edd5f6a5
CADSTAR PCB: Fix loading of thermal pads
...
- Create a pad if a component copper is associated with any other pads
in the footprint.
- Rename/renumber 'PCB Only' pads that are associated with a component
copper and make them all use the same pad name/number.
2021-04-12 20:25:05 +01:00
2cde76a191
Don't do any hole clearance testing within a single footprint.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8141
2021-04-11 16:03:16 +01:00
3450610977
Add ability to allow thermal vias to be implemented as pads.
...
This is mostly just for CADSTAR. Since we don't (yet) have general
purpose footprint attributes, this reuses the "net tie" hack.
Fixes https://gitlab.com/kicad/code/kicad/issues/8141
2021-04-09 14:02:13 +01:00
7b3c7e1ef3
Fix some free/delete issues
...
Removes the C-format memory management
2021-04-08 16:58:45 -07:00
85efdb85b0
CADSTAR PCB: Ensure continuous track routes
...
When route offsetting, add an additional thin track to ensure
end point of one track and start point of the next are at the same
location.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8131
2021-04-07 11:28:02 +00:00
9a764126ce
CADSTAR PCB: Keep all tracks as a single chain where possible
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8119
2021-04-05 20:15:09 +01:00
cb17c9f3dd
Typo fix: Correct various misspelled words
...
agressive -> aggressive
decription -> description
miscellanous-> miscellaneous
rectange -> rectangle
Unkown -> Unknown
2021-04-03 13:39:50 +00:00
b151dd02b9
CADSTAR PCB: Fix incorrect solder mask/paste clearance
...
Need to divide by two as this is a clearance, not diameter.
2021-03-30 13:03:56 +00:00
ad2043eda6
CADSTAR PCB: DrillXoffset and DrillYoffset are zero when not specified
...
Fixes an issue that resulted in pads being loaded 100nm off from the
original CADSTAR position.
2021-03-30 13:03:56 +00:00
6eb2e2a6e3
Fp editor: do not change item UUIDs when loading a footprint from library.
...
Fixes #8066
https://gitlab.com/kicad/code/kicad/issues/8066
2021-03-30 12:58:22 +02:00
34a435cd56
CADSTAR PCB: Handle import of pads with different paste and mask sizes
...
KiCad doesn't yet support full padstacks, but at least we can use the
solder mask / solder paste expansion to import a better result. Also
we can disable the specific layer if the shape has a size of zero.
2021-03-25 17:54:56 +00:00
107a1990c9
CADSTAR PCB: Handle route offset
...
The CADSTAR post processor has a peculiar feature called "route offset"
which effectively shortens tracks when the pad, track or via that it
connects to has a smaller width. This operation is not saved in the
design itself, but applied as a post processing operation meaning that
the importer has to apply it when loading on the board.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6648
2021-03-25 17:50:33 +00:00
1468764f83
CADSTAR PCB: Lock footprint pads after import
2021-03-25 17:50:33 +00:00
9a0f9575b6
Fix minor Coverity warnings
2021-03-25 09:12:24 +01:00
f0ed5fab39
add missing include for wxWidgets 3.1.4
2021-03-21 17:35:20 +01:00
68f3d09ac1
altium: introduce tokenizer for query language
...
Based on this tokenizer, a LL1 parser will be built in the future.
2021-03-21 16:39:23 +01:00
c04e19f9ac
Include optimization: move some things from common.h to point-of-use
2021-03-20 12:09:18 -04:00
fcb9af2b12
When saving footprint to library don't detach from board too early.
...
In particular, make sure it's been flipped to the front layer first.
We need to know the layers to do the flip.
Fixes https://gitlab.com/kicad/code/kicad/issues/7780
2021-03-03 15:07:01 +00:00
bbd6a1db0e
Formatting
2021-03-02 19:57:19 +00:00
b33ec125ac
use "pattern" instead of "sourcelibreference" for footprints
2021-03-02 19:57:19 +00:00
a9ca1e4ebd
use "pattern" instead of "sourcelibreference" for footprints
2021-03-02 19:57:19 +00:00
6533b47f0a
use "pattern" instead of "sourcelibreference" for footprints
2021-03-02 19:57:19 +00:00
f90164f7cf
Fix some typos and improve wording
2021-03-02 19:13:49 +01:00
dbb6d0fb4a
Move paste and mask clearance settings back to board file
...
These are needed for correct Gerber plotting so need to be stored
along with the board file
2021-02-28 14:04:28 -05:00
bcc3767c2a
FABMASTER: Fill both kinds of silk polys
...
Silkscreen polygons are always filled (I think) in FABMASTER. Other
layer polygons are not
2021-02-27 06:58:04 -08:00
5d352d2373
FABMASTER: Enforce KiCad limits on line width
...
We require unfilled polygons to have positive width
2021-02-26 17:16:54 -08:00
7e0168a99d
FABMASTER: Process newer outline tag
...
Allegro uses the subclass "DESIGN_OUTLINE" in newer version for their
edge cuts instead of just "OUTLINE". This handles both.
Fixes https://gitlab.com/kicad/code/kicad/issues/7735
2021-02-26 17:06:56 -08:00
c9b39aaaed
FABMASTER: Process REFDES position
...
The reference designator is stored separately with the Tracks, so we
need to extract position/size data from it there and match back to the
components later.
Fixes https://gitlab.com/kicad/code/kicad/issues/7733
2021-02-26 17:04:21 -08:00
75c525af4f
FABMASTER: Handle polygons better
...
Polygons in non-etch layers need special handling to ensure they get
treated the same.
Fixes https://gitlab.com/kicad/code/kicad/issues/7731
2021-02-26 14:01:04 -08:00
2d5015c217
FABMASTER: Try harder to figure out nets
...
Find all intersecting points both forward and back between the filled
areas and the outlines in order to determine the proper net assignment
for the zones
Also creates rule areas for special zones instead of filled zones
Fixes https://gitlab.com/kicad/code/kicad/issues/7732
2021-02-26 13:06:06 -08:00
b31bf1e40f
Always store via drill value in .kicad_pcb file.
...
Old boards were using UNDEFINED_DRILL_DIAMETER value in file for via drill when
the via drill value was the netclass value.
Recent boards always set the via drill to the actual value, but now we need
to be sure always store the drill value, because netclass value is not stored
in the board file. Otherwise the drill value of some (old) vias can be unknown
2021-02-26 20:57:43 +01:00
73dd93701a
FABMASTER: demote odd graphics warning
...
Drill layers have many different shapes in FABMASTER. These are not
used for board information, so we can ignore them.
2021-02-26 11:37:21 -08:00
ae2a9ef538
Use std::locale::classic static local
...
Prevents performance issues when creating new locales under MSVC
2021-02-26 11:37:21 -08:00
103dde67f6
FABMASTER: Handle rotated/flipped custom pads
...
The rotate mirror actions need to line up with the expectation.
FABMASTER keeps elements board-referenced while KiCad has some elements
referenced to the board and some referenced to the footprint
2021-02-26 11:37:21 -08:00
ff1300d13b
FABMASTER: Preallocate vectors
...
Reserves memory for vector elements based on file size. This helps
reduce the number of re-allocations needed when reading large files
2021-02-26 11:37:21 -08:00
86aaa2e9cb
Rationalize footprint bounding boxes and cache all of them.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7720
2021-02-26 13:50:27 +00:00
c15a9e60d4
Used cached footprints without check in preview
...
Between the time the user loads the footprint preview in cvpcb or Add
Footprint in pcbnew, we don't need to verify cache integrity to display
the footprint. We use the cache copy when displaying until we close the
selection window and re-open. This limits our need to iterate over the
full directory on every footprint display.
Alternate solutions for v7 should include looking into libfswatch for
change detection
2021-02-25 15:46:52 -08:00
54539d2cd7
Calculate timestamp the same way both times
...
Timestamps were checked using a different routine than they were
generated with, leading to the cache always being out of date.
This uses the same routine for both. While it iterates over the
directory twice during the initial load, this will never be dominant
Fixes https://gitlab.com/kicad/code/kicad/issues/7711
2021-02-25 14:36:49 -08:00
154d56b4f4
If items exist on the "Rescue" layer, prompt user
...
Don't allow Rescue items to enter the board design. This prompts the
user to either delete them or move them to the Comments layer.
2021-02-23 09:25:00 -08:00
09ebfcd650
CADSTAR Importer: Fix Code Style
...
- Rename member variable names to use the 'm_' prefix
- Rename a few object types that clashed with KiCad object names, such
as BOARD and SCHEMATIC, to avoid the use of '::' to access the KiCad
objects.
- Remove some unused code.
2021-02-22 13:24:00 +00:00
3bc9d7b95e
Rework GAL layer enum to fix visibility import from legacy boards
2021-02-21 13:41:43 -05:00
9dacd4abb7
Don't allow footprint children in groups outside their footprint.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7625
2021-02-20 18:09:56 +00:00
622baa6531
Silence more unused exception var warnings
2021-02-20 12:01:51 -05:00
de7d9ef874
Fix tabs
2021-02-15 08:09:20 -08:00
55db1aa5f5
Fix minor Fabmaster issue
2021-02-13 16:32:39 -08:00
19d786852a
CADSTAR PCB Archive Loader: Fix loading of zero sized pads
...
Some CADSTAR designs use zero sized pads because CADSTAR did not allow
arbitrarily assigning pad numbers: they had to be sequential. The
workaround to this was to use zero sized pads. However this causes DRC
errors in KiCad, so we load them just in a mask layer.
2021-02-10 18:49:21 +00:00
aabe9c063f
CADSTAR PCB Archive Loader: Some fixes to design rules
...
1. Make sure to convert to KiCad units
2. There are some KiCad rules that have no CADSTAR equivalent.
Make a guess as to what an appropriate rule could be.
2021-02-10 18:49:21 +00:00
2d66abdc89
CADSTAR PCB Archive Importer: More improvements to loading of zones
...
Adds a new function Area() to SHAPE_POLY_SET
2021-02-10 18:49:21 +00:00
06c420a2a3
CADSTAR PCB Archive Importer: Improve loading of zones
...
Load fill state and guess zone priorities from fill state
2021-02-10 18:49:20 +00:00
80d8974f87
CADSTAR Archive Importer: Fix loading of non-cadstar font text sizes
...
Non-cadstar fonts use a width of 0.
2021-02-10 18:49:20 +00:00
f559e94b00
Non-Kicad Project Importers: Fix the creation of project fp libraries
...
Adds a new function to PLUGIN GetImportedCachedLibraryFootprints() that
loads the library footprints of the board design that was imported
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7449
2021-02-10 18:49:20 +00:00
297ff282f1
CADSTAR Importer: Update copyright years and remove white spaces
2021-02-10 18:49:20 +00:00
872184fe8b
Revert "Bump minimum required CMake version to 3.10"
...
This reverts commit a475f45753
2021-02-09 18:46:13 -05:00
a475f45753
Bump minimum required CMake version to 3.10
...
This allows us to remove even more workarounds
2021-02-08 12:23:08 +00:00
088ff5b2bb
altiium: set fill version, which allows us to do a copper pour without a line
2021-02-06 23:58:30 +01:00
8ee6694c57
altium: Set smaller zone MinThickness by default to better account for missing design rules
2021-02-06 23:45:28 +01:00
d444ed80a5
altium: parse Regions6 to fill zone on import
2021-02-06 23:06:59 +01:00
016bffc899
Remove some more unneeded atof() calls
2021-02-05 10:18:34 -08:00
2e67cd2db8
Fix locale issue in Fabmaster import
2021-02-04 16:32:02 -08:00
aa0db969ca
Caching ConvexHull routine
...
Stores a cache of the convex hull similar to the bounding box. Modifies
the hull based on actions to allow complex footprint graphics without delay
Fixes https://gitlab.com/kicad/code/kicad/issues/7341
2021-02-04 15:56:52 -08:00
0de3d48db5
typo
2021-02-04 09:00:35 +01:00
22d78a5827
FABMASTER: Handle flipped custom pads and rounded rects
...
Adds error messages for more cases and fallback for custom pads to
prevent invalid pad generation
2021-02-02 19:33:18 -08:00
b54e951ed8
Fix a couple of checks in Fabmaster
2021-01-31 14:12:40 -08:00
21fe8542df
Remove shadowing of identical base m_parser member
2021-01-31 12:56:27 -05:00
70e6d0e79f
altium: use those new fancy user definable layers and import the name from Altium
2021-01-31 11:15:08 +01:00
6a9e1ecf9e
altium: Center board after import
2021-01-30 17:43:02 +01:00
89a72df0b1
Fix a few FABMASTER issues
...
- Custom pads now properly supported with offset/rotation
- Fix missing pads from alternate layers
Fixes https://gitlab.com/kicad/code/kicad/issues/7299
2021-01-27 17:50:14 -08:00
6a39b81647
Fix the last of broken Doxygen comment specifiers.
2021-01-27 17:39:44 -05:00
bea310569b
Fix parsing of track/via user sizes from legacy boards
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6134
2021-01-26 21:51:36 -05:00
1e9639e89c
Save pintype alongside pinfunction (in pads).
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7283
2021-01-26 15:28:48 +00:00
5a9c0a9b5a
Quiet a few coverity warnings
2021-01-24 14:53:18 -08:00
9ac807bdd2
Freeze implicit footprint file version at last before explicit.
...
We have been writing footprint versions for a while now, but we were
still interpreting the lack of a version as "current". This changes
lack of a version to mean "last format before we started writing out
versions".
Fixes https://gitlab.com/kicad/code/kicad/issues/7143
2021-01-23 00:10:01 +00:00
060635b14c
fabmaster: Fix graphic handling in geometry section
2021-01-19 12:16:40 -08:00
d030d1667b
Fix improper string creation in fabmaster importer
2021-01-18 18:35:10 +00:00
1754504234
Fabmaster: fix MSVC build
...
std::map is not move-constructable on MSVC because
it is not declared noexcept (and is not required to be
by the standard)
This means that a struct containing graphic_element
cannot be inserted into a vector with move semantics without
compile errors. However, wrapping it in a unique_ptr
works.
2021-01-17 10:23:31 -05:00
950db6ff9c
pcbnew: Add Fabmaster import
...
Allows importing ASCII design output from OrCAD designs
2021-01-16 14:28:33 -08:00
9f24ea0bb7
altium: fix non-copper pads. Roundrect pads were not filled and SetLocalCoord() does not transform polygons into the local coordinates, which is unexpected.
2021-01-14 22:21:05 +01:00
0bce280424
Make sure design rules get recompiled after netclass changes.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7082
2021-01-13 12:37:20 +00:00
07635d2fc7
Minor adjustments
2021-01-12 20:51:31 +00:00
ac94d72d2d
Add more const specifiers
2021-01-12 20:51:31 +00:00
3467e643e5
Move pad locking from footprint to pads.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6997
2021-01-08 20:43:02 +00:00
01fe3b91e9
Implement locking for graphic shapes.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6972
2021-01-07 17:39:18 +00:00
a06387fafd
Fix warning at compile time
2021-01-02 22:42:16 +00:00
8d81abb57a
Consistent use of spaces in strings.
2020-12-30 22:57:50 +00:00
b168b74919
CADSTAR Archive Importer: Fix position of multiline text with NO_ALIGNMENT in CADSTAR
2020-12-30 18:53:43 +00:00
ffee24be63
CADSTAR PCB Archive Importer: Rewrite loadBoardStackup routine
...
Uses BOARD_STACKUP::BuildDefaultStackupList instead of trying to build the stackup from scratch
Fixes several asserts / incorrect stackups in some older boards
2020-12-30 18:53:43 +00:00
a2cbbb963e
CADSTAR PCB Archive Loader: Correctly handle Dimension text
...
Do not parse fields in dimension text to allow splitting it into prefix and suffix
2020-12-30 18:53:43 +00:00
45b621a3d1
CADSTAR PCB Archive Importer: Fix Import of Linear Dimensions (Angular dimensions not supported)
2020-12-30 18:53:43 +00:00
fbac766254
CADSTAR PCB Archive Importer: Refactor layer mapping and fix assert
...
An assert was being fired to due to incorrect BOARD_STACKUP_ITEM_TYPE on some boards
2020-12-30 18:53:43 +00:00
0a1045300b
CADSTAR PCB Archive Importer: Fix loading of net class settings
2020-12-30 18:53:43 +00:00
cde433c82e
CADSTAR PCB Archive Importer: Transfer Project to allow importing of Text Variables
2020-12-30 18:53:43 +00:00
03a23db4f7
CADSTAR PCB Archive Importer: Load PCB Text Variables to KiCad project
2020-12-30 18:53:42 +00:00
9ed4780fec
CADSTAR Archive Importer: Change architecture to Parse CADSTAR fields and store them in a static map
...
Architecture of the parser changed to have a shared PARSER_CONTEXT between all the individual parsers.
Parses CADSTAR fields such as <@DESIGN_TITLE@> or <@SHEET_NUMBER@> and replaces with an equivalent KiCad Text Variable.
2020-12-30 18:53:42 +00:00
93466fa165
Fix crash when adding 3D Models via Python
2020-12-28 20:03:54 +01:00
17cf2466aa
Fix overlapping definitions warning
2020-12-27 19:42:04 -05:00
97f3c323c3
Pcbnew: fix missing escaping of texts in DIMENSION when saving the .kicad_pcb file.
...
Fixes #6855
https://gitlab.com/kicad/code/kicad/issues/6855
2020-12-27 10:18:23 +01:00
70c397a9b4
Implement free vias fully
...
CHANGED: manually-placed (stitching) vias won't have their nets automatically updated
(unless the via is placed directly on a track segment)
CHANGED: stitching vias can be placed on footprint pads and pick up their nets
Fixes https://gitlab.com/kicad/code/kicad/-/issues/5484
2020-12-20 16:29:50 -05:00
06aa1506ee
Add optional project parameter to PCB plugin load method.
...
The optional PROJECT parameter is primarily used for third party plugins
that need to store project information loaded by the plugin.
2020-12-18 10:40:51 -05:00
bb232e6ac6
Unify LIB_IDs now that both are stored in sexpr files.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6764
2020-12-18 00:30:26 +00:00
7565f60a03
Swap wxFileInputStream/wxFileOutputStream for the buffered kind
2020-12-12 18:52:02 -05:00
260219b0e6
CADSTAR PCB Archive Importer: Fix arc and filled shapes in footprints
...
- Need to call the PCB_SHAPE version of SetAngle in order to set the global coordinates for m_ThirdPoint
- Fill shapes also if in a footprint
2020-12-10 14:35:37 +00:00
ac684ac7a3
Fix minor compil warnings.
2020-12-08 18:28:03 +01:00
b1f0bf7334
More consistent naming.
2020-12-08 13:05:39 +00:00
e88d41f764
Add bulk add/remove mode flag to the BOARD_LISTENER
...
This attempts to fix performance when importing large changesets from schematics.
The appearance control is a BOARD_LISTENER that would otherwise redraw per item imported which may cause lockups
2020-12-07 22:04:13 -05:00
f3e1ac8dbe
Defensive code to prevent lookup of stale parent board.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6618
2020-12-04 14:01:54 +00:00
fd5e1fbdd4
Formatting and cleanup.
2020-12-04 14:01:54 +00:00
0691e942f4
CADSTAR Archive Importer: Fix duplicate KIID for loaded elements
...
Don't use clone to copy an EDA_ITEM. Use Duplicate().
Even if you give the clone a new KIID, all its children will still be clones.
Create Duplicate() in LIB_PART
2020-11-28 17:18:17 +00:00
71f9847601
CADSTAR Archive Importer: Only load the Master variant
2020-11-28 17:18:17 +00:00
78e3f917d9
CADSTAR PCB Archive Importer: Fix loading of old CADSTAR designs and Do Not Keep Upright
...
Older CADSTAR versions used 1/10 degree whereas newer versions use 1/1000 degree.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6437
2020-11-28 17:18:17 +00:00
f2ba9f7ac3
CADSTAR PCB Archive Importer: Correctly load the pad numbers as per the original design
...
To load the pad numbers correctly we need to also check the PART DEFINITION for each component
2020-11-28 17:18:17 +00:00
9c7c05c161
Mostly formatting cleanup but a few type-casting cleanups too.
2020-11-24 22:16:41 +00:00
976c6262f4
French translation update (fix also trailing spaces in a few sentences)
2020-11-23 11:42:25 +01:00
18ad58cf4c
Replace legacy copper edge heuristics.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6435
2020-11-19 13:35:26 +00:00
99da663e82
Remove unused variables plus some more fixes from CppCheck
...
Remove unused variables plus a few more fixes from CppCheck
Remove unused variables plus a few more fixes from CppCheck
2020-11-19 02:28:47 +00:00
0e44f5128c
Add const specifiers
2020-11-18 19:50:36 +00:00
16e3e59495
Split out arrayDim and MIRROR templates from macros.h
...
These were not macros
2020-11-17 20:21:04 -05:00
dff5173baf
Exorcise some instances of "modedit".
2020-11-17 16:05:48 +00:00
a431fd99ca
Fix crash when converting a Eagle board to a Kicad board.
...
During conversion a illegal layer number was used without filtering
2020-11-17 10:23:44 +01:00
7d1a4a4224
Add version information to footprint sexpr files and clipboard
...
This allows the parser to properly interpret the sexpr version
of the footprint so that it can throw future format errors or
do version specific parsing properly.
2020-11-16 23:19:09 +00:00
f21e308830
Tweak fill logic to also catch filled primitives in custom pad shapes.
2020-11-15 23:14:46 +00:00
ceb51bb103
pcbnew: Only write fill flag for circles, rectangles and polygons
...
The other shapes don't have the same concept of being filled
(their fill is only a viewing mode, not an actual saved property).
2020-11-15 22:03:59 +00:00
8c08b861ab
Cleanup some compiler and Coverity warnings
2020-11-15 21:41:38 +00:00
b31e97cfed
Fix FP/PCB_SHAPE fill sexpr syntax to be backwards compatible
...
Previously the fill for shapes inside a footprint was not being
properly imported from older versions becase the default of no
flag changed from representing filled to representing no fill.
Introduce explicit filling information, and continue to treat no
flag on a polygon as meaning it is filled (which is the legacy
behavior).
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6393
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6390
2020-11-15 21:28:27 +00:00
3f1a58bd06
Replace "module" with "footprint" in PCB sexpr.
2020-11-15 20:23:15 +00:00
d094f86b1a
Finish module cleanup (except for xpms).
2020-11-14 22:00:12 +00:00
61bca4aaa4
A bit of "module" erradication, nameing conventions, and formatting.
2020-11-14 21:21:54 +00:00
666c11965a
Clean up some more MODULE terms.
2020-11-14 19:56:06 +00:00
7bd31d5237
Naming conventions.
2020-11-14 18:26:03 +00:00
8bae52d1c3
Correct naming conventions.
2020-11-14 14:29:11 +00:00
aa06de2db4
Legacy polygons on non-Edge_Cuts layers were always filled.
2020-11-14 14:15:02 +00:00
a4650e7269
Rename GetModules to GetFootprints
2020-11-14 09:37:45 +00:00
dfddd19b17
French translation update.
...
Fix also a typo.
2020-11-14 09:02:36 +01:00
ec020dd19f
First-class support for filled shapes.
2020-11-14 01:40:32 +00:00
86b6afd14b
More cleanup of MODULE to see if it fixes SWIG error.
2020-11-13 21:07:36 +00:00
47e86d76fb
Cleanup prior to adding filled flag.
2020-11-13 21:07:36 +00:00
bdbb68f813
MODULE -> FOOTPRINT.
2020-11-13 16:04:03 +00:00
3451ac3088
PCB_MODULE_T -> PCB_FOOTPRINT_T
2020-11-13 15:16:24 +00:00
63a54d003e
More module -> footprint.
2020-11-13 15:16:24 +00:00
9106cc19bf
Yet another tranche of module -> footprint.
2020-11-13 15:16:24 +00:00
2cc9dad4ff
More module -> footprint.
2020-11-13 15:16:24 +00:00
8c947b69b0
More module -> footprint.
2020-11-13 15:16:24 +00:00
fc9cf1d827
More module -> footprint.
2020-11-13 15:16:24 +00:00
52a46341db
More module -> footprint.
2020-11-13 15:16:24 +00:00
f5443de7f9
D_PAD -> PAD.
2020-11-13 15:16:24 +00:00
2bc004eb0b
Prepare for D_PAD -> PAD.
2020-11-13 15:16:23 +00:00
84dd5108ba
Remove some "class_" prefixes from files.
2020-11-13 15:16:23 +00:00
fc8bf6f0fe
Allow a user to remap layers in Eagle import
...
ADDED Allow for user mapping of layers in Eagle import
ADDED Support required and optional layers in the layer mapping dialog
ADDED Add base class for plugins supporting remappable layers
2020-11-12 11:37:04 +01:00
f7333ad64a
Update some classnames including archaic zone names.
2020-11-12 10:31:25 +00:00
fb218e3c9b
Pcbnew: allows filled option ( 0 outlines width ) for graphic items rect and circle.
...
It was allowed inside editors, dialog properties and when saving the board file.
However it was not allowed when reading the file. It is now allowed.
Fixes #6355
https://gitlab.com/kicad/code/kicad/issues/6355
2020-11-12 09:01:08 +01:00
812b714ccd
More Module -> Footprint and a bit of formatting cleanup.
2020-11-10 20:53:12 +00:00
1c30d36d73
Fix errant use of SetPosition().
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6292
2020-11-04 19:24:09 +00:00
89e21d28f0
French translation update, and minor I18n fixes
2020-11-02 20:23:01 +01:00
3d49f6d6f8
CADSTAR PCB Archive Importer: Import missing layer subtypes LAYERSUBTYPE_CLEARANCE and LAYERSUBTYPE_ROUT
2020-10-27 11:33:35 +00:00
7532428c46
CADSTAR PCB Archive Importer: Fix loading of angled slotted holes
2020-10-27 11:33:35 +00:00
5e7d4ca6e8
CADSTAR PCB Archive Importer: Fix Position and orientation of non-symmetrical pads
...
Previously they were not loaded at the correct positions
There is still a problem with angled slotted holes, but now we display a warning to the user.
2020-10-27 11:33:35 +00:00
0dc153fe58
CADSTAR PCB Archive Importer: Load correct pad information for pads with PADEXCEPTION
...
Overwrites pad definitions for pads that have PADEXCEPTION
2020-10-27 11:33:35 +00:00
7a1777e9b9
CADSTAR PCB Archive Importer: Parse EXITS node in PADEXCEPTION
2020-10-27 11:33:35 +00:00
31e626f279
Cleanup creation of all our smart pointers
2020-10-26 23:52:44 +00:00
c060fc9591
altium: use CENTER_DIMENSION instead of line interpolation
2020-10-26 14:11:24 +01:00
7ec27c2a18
altium: no idea what Region Kind=2 means, but at least the existence is noted
2020-10-26 13:50:11 +01:00
1167862c86
Split wx_filename out of common
2020-10-25 20:01:13 -04:00
b2ad9b5b83
Treat P-CAD copper polygons as very-high-priority zones.
...
In P-CAD they don't avoid other copper pours, so this should more
accurately reflect that in Kicad. (Note that only the very-high-
priority part is new; we've always coverted them to zones.)
Fixes https://gitlab.com/kicad/code/kicad/issues/3997
2020-10-25 13:38:15 +00:00
e928b2d8fd
Split EDA_UNITS out from common.
2020-10-25 00:02:52 -04:00
1d559108c8
Move LOCALE_IO out of common.h
2020-10-23 21:49:42 -04:00
47786fa976
altium: Correctly handle symbol names containing invalid chars
...
Fix: https://gitlab.com/kicad/code/kicad/-/issues/6082
2020-10-23 14:30:29 +02:00
412bc2ba8a
altium: detect polygons with less than 2 unique points
2020-10-22 17:23:12 +02:00
06e9a21791
altium: fix coding style, remove useless check
2020-10-22 13:44:55 +02:00
a6f6d44026
altium: correctly handle arcs in polygon and zone outlines
2020-10-22 13:37:29 +02:00
f8a4edb1c9
First pass renaming module to footprint
...
This is mostly in comments and the few remainin text strings that
reference module
2020-10-20 20:49:11 -07:00
68ec151f28
Clear group info before parsing.
...
PCB_PARSER is a long-lived object. Doing it in init() is not
sufficient.
Fixes https://gitlab.com/kicad/code/kicad/issues/6074
2020-10-20 13:38:09 +01:00
d142075417
altium: fix netclass parsing
2020-10-20 11:48:27 +02:00
f06f4e7a13
altium: handle keepout tracks/arcs on multiple layers
2020-10-20 10:35:58 +02:00
7642bbc090
altium: Via record can have size=74, which was not supported by us
...
Fix: https://gitlab.com/kicad/code/kicad/-/issues/5543
2020-10-20 10:22:24 +02:00
e7ab924a86
CADSTAR PCB Archive Importer: Resolve comments in MR
...
- Change wxASSERT(false) to wxFAIL_MSG
- Fix double negative
- Add small comment to TXT_HEIGHT_RATIO
2020-10-20 00:00:05 +00:00
6fb338d136
CADSTAR PCB Archive Importer: Fix imported Text Angle when mirrored
...
Angle needs to be negated in KiCad
2020-10-20 00:00:05 +00:00
7839a508b3
CADSTAR PCB Archive Importer: Fix imported text height
...
Apply a scaling factor derived from CADSTAR's default font
2020-10-20 00:00:05 +00:00
a514817c57
CADSTAR PCB Archive Importer: Fix component mirroring
...
Need to invert mirror angle before calling MODULE::Flip
2020-10-20 00:00:05 +00:00
dcf69d53f0
CADSTAR PCB Archive Importer: Fix unhandled case statements
...
Note: UNITS::DESIGN refer to the units defined in Assignments.Technology.Units
Fixes https://gitlab.com/kicad/code/kicad/-/issues/5725
2020-10-20 00:00:05 +00:00
d780cb7e7c
CADSTAR PCB Archive Importer: Load CADSTAR routing areas as a KiCad rule area
2020-10-20 00:00:05 +00:00
5273c77fbf
CADSTAR PCB Archive Importer: Parse TRUNK and TRUNKREF, display error if present (no KiCad equivalent)
2020-10-20 00:00:05 +00:00
7a624d8d44
CADSTAR PCB Archive Importer: Fix warning.
...
Need to std::erase after std::remove!
2020-10-20 00:00:05 +00:00
a1c75748a0
Remove GetChars(), a wxWidgets 2.9 compatibility hack
2020-10-15 20:53:25 -04:00
52a12c6ccd
Remove kicad_string.h from footprint_info.h
2020-10-15 18:39:43 -04:00
5f4b0eb0fb
Fix formatting and overzealous renaming for FILL_TYPE
2020-10-15 11:24:49 +01:00
1538d737e7
Split out FILL_T to its own header to avoid spreading eda_item everywhere
2020-10-14 21:51:23 -04:00
12d21e34e2
Remove trigo.h from eda_text.h
2020-10-13 23:37:48 -04:00
505d764f25
Set board modify bit only when necessary after Board Setup.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/5685
2020-10-13 23:11:29 +01:00
e789ad9fb2
Don't use clone to copy an EDA_ITEM. Use Duplicate().
...
Even if you give the clone a new KIID, all its children will still
be clones.
Fixes https://gitlab.com/kicad/code/kicad/issues/5982
2020-10-13 16:54:26 +01:00
1703729269
Require explicit decl of maxError and errorLocations.
...
This should reduce both performance issues and clearance issues.
2020-10-13 13:49:07 +01:00
c40483d18a
Cleanup: Move KiCad files into plugins folder
2020-10-12 16:36:08 +00:00
70fcc139ec
Cleanup: Move P-CAD files into plugins folder
2020-10-12 16:36:08 +00:00
f45ca7179b
Cleanup: Move GEDA PCB files into plugins folder
2020-10-12 16:36:08 +00:00
1416280662
Cleanup: Move Eagle files into plugins folder
2020-10-05 14:19:07 +00:00
37906511f5
Class renaming.
...
DRAWSEGMENT -> PCB_SHAPE
EDGE_MODULE -> FP_SHAPE
TEXTE_PCB -> PCB_TEXT
TEXTE_MODULE -> FP_TEXT
2020-10-05 11:55:33 +01:00
7a4900b8dc
PCB_LINE_T -> PCB_SHAPE_T and PCB_MODULE_EDGE_T -> PCB_FP_SHAPE_T
...
Also updated footprint text and zone types for consistencey.
2020-10-04 16:49:04 +01:00
d14761bee6
Fix inches being sometimes used instead of mils
2020-10-03 20:06:56 +00:00
400c15b8eb
Add mils to units, remove useMils variables
2020-10-03 20:06:56 +00:00
716598ac24
Layout tweaks to CADSTAR layer mapping dialog
2020-10-02 22:17:08 -04:00
72d9a36fd6
ADDED: Dialog to handle import of unmatched layers from CADSTAR
2020-10-03 01:21:57 +00:00
bf3cb0b1d0
Standardize pad type enums
2020-09-30 08:38:35 -07:00
39995341d9
Compile fixes
...
Fix compile error
Fix string format to use %ld instead to work on clang in CADSTAR Archive importers
Add virtual destructor to CONNECTION in CADSTAR_ARCHIVE_PARSER
2020-09-27 22:05:07 +00:00
6f5f6a0fba
CADSTAR Schematic / PCB Archive Importers: Fix string formatting asserts
2020-09-27 18:14:02 +01:00
93242eb3ad
CADSTAR Schematic / PCB Archive Importers: Add missing import warnings and fix code formatting
2020-09-27 18:14:01 +01:00
2d99703e28
CADSTAR Schematic Archive Importer: Load all Sheets and Hierarchical Blocks
2020-09-27 18:13:58 +01:00
646a733556
CADSTAR Schematic Archive Importer: Parse all elements
2020-09-27 18:13:57 +01:00
1b20a2910a
Move all common CADSTAR Importer Parser code
...
Move all common code from CADSTAR_PCB_ARCHIVE_PARSER (pcbnew) to CADSTAR_ARCHIVE_PARSER (common)
2020-09-27 18:13:56 +01:00
18e17abd6a
Rename "Keepout" to "Rule Area"
...
These objects can now be used in advanced DRC rules and
not just for keeping things out. Also remove the restriction
that at least one of the "basic" keepout rules must be set,
so that these areas can be used for more advanced rules.
2020-09-21 23:55:02 -04:00
f82ad61c90
More warning cleanup
2020-09-20 01:43:27 +01:00
f340636f70
When knocking out higher-priority zone use fill, not outline.
...
Also fixes a bunch of naming issues, primarily with lowercase for
protected variables, but also some for consistency with other parts
of the code.
Also changes the zone fill radio buttons in Board Setup to be more
generic referring to legacy vs. current, and to have tooltips.
Fixes https://gitlab.com/kicad/code/kicad/issues/5583
2020-09-18 16:45:41 +01:00
aa0b0ca7e7
Fix some warnings in the cadstar importer
2020-09-18 11:17:37 +01:00
5467729611
Fix incorrect comparison in CADSTAR PCB Archive Importer
...
Also avoid use of magic numbers in case KiCad internal units ever change
2020-09-15 17:16:01 +00:00
ff0a728753
Fix a few I18N issues.
2020-09-14 10:02:07 +02:00
b11e315d10
Refactor DIMENSION to hide internal details; add some new properties
...
This is a board file format change to account for the new properties.
Also, we now only store the critical information about the dimension's
geometry in the board, rather than storing every drawn line.
The DIMENSION object is now an abstract base, and ALIGNED_DIMENSION
is the implementation that exists today (we will add more dimension
types in the future)
2020-09-11 21:12:36 -04:00
e31705d4b3
More source reporting for clearance rules.
2020-09-10 20:58:38 +01:00
6a82f23981
CADSTAR PCB Archive Importer: Load Component Copper and Component Areas
2020-09-08 21:21:21 +00:00
c1dec964be
CADSTAR PCB Archive Importer: Fix Parsing errors
...
Change error displayed when a Library .cpa file is opened (instead of a Layout file)
Add warning if variants exist in original design.
Parse LAYERHEIGHT in LAYER (same thing a MAKE but without the MATERIAL_ID)
Parse PADEXCEPTION in COMPONENT
Add DESIGN as one of the valid UNITS
2020-09-08 21:21:21 +00:00
05e5740504
CADSTAR PCB Archive Importer: Parse VARIANT data + add missing "REFPLANE" flag to layers
2020-09-08 21:21:21 +00:00
349ac06ee2
CADSTAR PCB Archive Importer: Fix compile error + BULLET pad is now correct
2020-09-08 21:21:21 +00:00
112da7828e
CADSTAR PCB Archive Importer: Load Dimensions
2020-09-08 21:21:21 +00:00
Roberto Fernandez Bautista
Jeff Young
Seth Hillbrand
jean-pierre charras
Wayne Stambaugh
david-beinder
Jon Evans
Marek Roszko
Thomas Pointhuber
Mikolaj Wielgus
luz paz
Johannes Maibaum
Ian McInerney
Simon Richter
Carsten Schoenert
WhiteChairFromIkea
Jonathan Haas
Dominik Wernberger
Carlo Bramini
Allan Nordhøy
Jan Mrázek
Michael Kavanagh