288620551f
adiv5: Print out SYSROM PIDR.
...
We need to know more about what devices indicate proper PIDR and what
devices fail to do so.
2020-03-04 19:02:07 +01:00
8c959defca
efm32: Make local functions static.
2020-03-04 18:44:40 +01:00
470c8e8cf1
target_flash_erase: Do not crash when requesting erase of unavailable flash.
...
Allow to erase from command line.
2019-12-13 14:59:42 +01:00
ab396f9745
Allow %z specifier in windows builds. Supercedes #562 .
2019-12-08 16:43:19 +01:00
1bef51e145
adiv5: Abort scanning APs after 8 void APs.
2019-12-08 16:43:19 +01:00
bdd76de517
Erase: Fix endless erase when erase-area did not end on (page|block) boarder.
2019-12-08 16:43:19 +01:00
25d24e5c34
efm32: Allow to compile with -Og.
2019-12-08 16:43:19 +01:00
5943552a6b
[efm32] Probe for the EFM32 Authentication Access Port (AAP)
...
Supported functionality through this AP:
* Issuing a DEVICEERASE command
2019-12-08 16:21:02 +01:00
260fc88d8f
[efm32] Add command to set and print bootloader enable status
...
This is a bit in the Lock Bit (LB) flash page, so it can only be
cleared by this routine
2019-12-08 16:17:02 +01:00
7f0d5febc3
[efm32] Print MSC Interrupt Flags to DEBUG after each flash write
2019-12-08 16:16:55 +01:00
e85df763b7
[efm32] add new devices PG12B, JG12B, GG11B, TG11B, GG12B
...
Rework MSC layout check
2019-12-08 15:55:12 +01:00
f89542c79f
Merge pull request #203 from dlaw/master
...
Add LPC11xx command to read out unique ID from target. Restore Ram and registers after call.
2019-12-08 15:45:49 +01:00
8a07f44435
Add support for the kinetis KL16Zxx devices. Tested on KL16Z128VFM4 custom hardware
2019-11-21 20:37:13 +01:00
e7e34600a4
lpc11: Only print Idcode if not zero and not yet handled.
...
Otherwise for all Cortex-M not yet handled this LPC messages appears.
2019-11-17 13:24:39 +01:00
9198c951bb
Reduce flash space required for SAM D51/E5x driver
...
* Reuse functions that are common with the SAM D1x/D2x driver
* Only include the mbist and write8/16/32 user commands if
SAMX5X_EXTRA_CMDS is defined
2019-11-17 12:45:49 +01:00
d3c330ea1a
Fix issues with Travis CI build
...
It appears the Travis version of gcc-arm-none-eabi doesn't allow the %x
printf format specifier for size_t arguments, in contrast with the
version I'm running on Ubuntu 18.04 (15:6.3.1+svn253039-1build1).
2019-11-17 12:45:49 +01:00
26216beaab
Microchip SAM D51 / E5x support
...
Adds a target driver for Microchip SAM D51 / E5x family.
Tested on SAMD51G19A and SAMD51J19A. According to the datasheet, the
D51 / E5x family share the same core feature set, differing only in the
addition of CAN (E51) or ethernet controllers (E53/54). All members of
the family should be equivalent from a debug and programming perspective.
2019-11-17 12:45:49 +01:00
28f0ced97e
Support NXP LPC1343
2019-11-09 18:47:07 +01:00
67f9d26644
samd: Add support for L21 & L22 (PR #345 )
2019-11-09 13:59:37 +01:00
b9249fe104
adiv5: Activate DP reset sequence, guarded with timeouts.
...
While not working on most STM32, it succeeds on STM32G474.
Thanks to Dave Marples <dave@marples.net>
2019-10-20 22:15:28 +02:00
4a8cba0e9c
Add support for LPC1114/333 (LPC1100XL series)
...
This is not given in the user manual but the register immediately
following DEVICE_ID does apparently contain the correct part ID.
2019-10-13 13:01:19 +02:00
5c805c7d35
Fix buffer overflow in adiv5_component_probe()
2019-10-12 11:44:08 +02:00
0ae7cea1ae
Add LPC84 from UM11029, Rev. 1.4, tested on LPC845 Breakout board.
2019-10-08 18:17:43 +02:00
1cf0b8ac13
Make all arguments for all commands (struct *t, int argc, const char **argv).
...
-Wall on gcc8 otherwise warns without -Wno-cast-function-type but older
GCCs/CLang choke on that argument:
error: unknown warning option '-Wno-cast-function-type'; did you mean
'-Wno-bad-function-cast'? [-Werror,-Wunknown-warning-option]
This adds 24 byte to the binary, as some functions are now called with
additional dummy arguments:
"Pushing and popping garbage to keep the system happy"
2019-09-29 12:44:55 +02:00
f010a567bd
adiv5: Reject APs duplicating last AP.
...
Seen with TM4C129 on black MSP432R401 Launchpad. Scanning of APs is aborted,
so valid APs after duplicated APs are ignored.
2019-09-29 12:44:37 +02:00
fae2966b72
Target: Default to nop-function() for all exported target functions.
...
Fixes #522 .
2019-09-23 17:42:29 +02:00
609e6b135d
nrf51: Add nop_function as halt_poll. ( #517 )
...
Otherwise "tar ext ...; mon s; att 2; quit", start new gdb "tar ext ..."
crashes, at least on pc-hosted platforms.
2019-09-04 13:50:13 +02:00
6663da7ff5
cortexm.c: Fix DWT Mask ( #516 )
...
See #513
2019-09-04 13:28:55 +02:00
00937348b3
Fixes to compile "make ENABLE_DEBUG=1 all_platforms" ( #515 )
2019-09-04 13:09:43 +02:00
e6504e149b
cortexm: Implement single register read/write
2019-09-01 20:38:38 +02:00
7bcf7f4924
cortexa: Implement single register read/write
2019-09-01 20:38:38 +02:00
20cad17ce3
target: Implement generic multi-register read/write
2019-09-01 20:38:38 +02:00
9f4cf4124e
target: Add new methods for read/write individual regs.
2019-09-01 20:38:38 +02:00
d39dc34382
pc-stlinkv2: Fix reg_read|write
...
- Fix wrong placed brace in cortexm_regs_write()
- Start writing with r0
- With register read, save only registers listed
2019-09-01 12:11:37 +02:00
aef055bb6f
adiv5: If setup AP0 fails, fail immediate.
2019-08-31 11:20:17 +02:00
6bf4fd3598
pc-stlinkv2: CPU register read and write must be done with the AP set.
...
FIXME: Writing CPU registers on M4 of STM32H745 seems not to work.
2019-08-27 15:13:15 +02:00
4289788e0b
src: Replace sprintf with snprintf
...
snprintf is needed anyway, that's one less function to have :p
And it's bad practice anyway.
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
2019-08-05 15:43:33 +02:00
1d4152a36f
target: Make sure variant_string is consistent in size
...
It's a global symbol and LTO will complain if the one in this file and
the one in EFM32 target are inconsistent.
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
2019-08-05 15:42:29 +02:00
e29f2b4fb9
jtag/swd: Rename defines/make variables to allow removal of weak attribute
...
jtagtap.c is libopencm3 generic. Move to common.
2019-07-18 20:54:10 +02:00
067956266c
Adiv5: Remove weak attribute to ease windows compile.
2019-07-18 18:16:19 +02:00
9e898cc4b8
adiv5: Add more coresight part numbers found on STM32MP157c-DK2 ( #492 ).
...
Only print corename if not NULL.
2019-07-18 17:39:48 +02:00
dd3cb193f3
Indicate the Core in the Target list.
2019-07-17 17:38:21 +02:00
c44cb904b0
adiv5.c: Format debug output more tense.
2019-07-17 17:38:21 +02:00
634c07c432
adiv5: Add TSGEN.
2019-07-17 17:38:21 +02:00
9ed26645d3
Add pc_stlinkv2 platform, running on host, talking to original StlinkV2/3.
...
Stlink firmware needs to be recent.
2019-07-17 17:38:01 +02:00
32d2b2c4bf
jtag: Move device list to it's own file to allow reuse.
2019-07-17 17:26:00 +02:00
bd530c8951
adiv5.c: Make functions weak where high level platforms may implement different.
2019-07-17 17:26:00 +02:00
b4c680bb15
Add STM32G4
...
Based on #488 Stephen Roe, done as #491 .
Fixes ID of STM32G03.
2019-07-17 17:24:23 +02:00
5a7ffe7a40
Fixed SAM3X8C large file flashing.
...
The datasheet specifies the EEFC_BASE(0) is at `0x400E0A00` and EEFC_BASE(1) is at `0x400E0C00` which means they're spaced 0x200 bytes apart rather than 0x400.
2019-07-17 14:37:07 +02:00
02b2fdb2ae
fix overwriting of still-needed value (refs #487 )
...
this fixes a bug that was introduced in blackmagic PR #475 which lead to
firmware crashes when connecting to a BMP more than once without a
power-cycle.
2019-06-24 16:45:18 +02:00
589d297d20
stm32l0: Fix crash when only "monitor option" was requested.
...
PR #485
2019-06-12 12:54:29 +02:00
880613d641
lpc_common: restore RAM and registers after IAP call
...
Restore the RAM and registers which are clobbered by an LPC IAP call.
This does not restore any additional RAM which might be clobbered
by a *particular* IAP call. (For example, flash programming always
clobbers the last page of RAM.)
2019-05-30 14:01:27 -04:00
d3979a57b6
Add LPC command to read out unique ID from target.
...
This commit modifies lpc_iap_call() to work with IAP commands that
return additional data. If the "result" argument is non-null, 16
bytes of data (the maximum returned by any IAP command) are copied
to the specified address.
2019-05-30 14:01:12 -04:00
600bc9f029
Generate DEBUG warnings and return if `malloc`/`calloc` fail.
...
This is will make debugging earier if this does happen, rather than
dereferencing the null pointer (or passing it to memcpy, or worse).
blackmagic PR #475
2019-05-26 18:56:12 +02:00
61e9607594
[adiv5] Improvements in ADIv5
...
* Reference latest version of the ARM specification
* ROM tables - more debug information, including printing SYSMEM bit
* MEM-AP - reject when Debug Base Address entry is not
present/invalid. These would only have errored in
adiv5_component_probe.
* Fix maximum number of entries in Class 0x1 ROM Table to 960. See ARM
IHI 0031E Table D3-1 ROM Table register summary.
* Resolve note in STM32H7 driver with explaination
blackmagic PR #474
2019-05-24 22:00:44 +02:00
24a7b8b2bf
[stm32h7] add revision command which reads the `DBGMCU_IDC` register
...
blackmagic PR #476
2019-05-21 23:20:13 +02:00
c336c300a3
[stm32h7,bugfix] Fix bug: target_add_flash called in attach
...
When `target_add_flash` or `target_add_ram` are called in an attach
function they may be added multiple times. This very much confuses
GDB. This issue has already been reported and fixed for `stm32l4` (See
Issue #455 ).
`stm32f4` and `stm32l4` are the only other cortexm drivers that
implement this pattern. These are both fine.
2019-05-21 22:38:16 +02:00
984813a29d
Add Stm32G03 from reference manual Rev.2
...
Not yet tested on a real part.
2019-04-24 12:29:58 +02:00
302ff20a6d
Merge pull request #434 from UweBonnes/nrf5
...
Nrf5
2019-03-21 19:43:29 +01:00
3235fa2005
Improve parsing of commands that require enable or disable arguments:
...
* Accept prefixes of the words 'enable' and 'disable'
* Prevent silent failures on parse errors
* Print status after flag changes
* Fix missing includes
2019-03-19 12:56:44 -07:00
691ada17e9
Implement read device info for NRF5x
2019-03-10 21:45:47 +01:00
3f89fed32e
nrf51: Use buffered direct write to flash.
2019-03-10 21:45:47 +01:00
4ecd13a9a3
nrf51: Fix crash with not argument given to "mon read".
2019-03-10 21:45:47 +01:00
db2f403417
sam4l: Remove noisy debug message.
2019-03-10 21:45:47 +01:00
a336ac2084
NRF5: New detection scheme.
2019-03-10 21:45:47 +01:00
6887628eaa
Correction of #445 attach-detach problem
...
Memory map is now completely freed and rebuilt in the separate attach
function.
It was previoulsy split beween probe and attach and never released,
causing problems when reattaching to the same target.
2019-03-03 15:55:40 +01:00
da62cbaa3d
Merge pull request #449 from jelson/width-fix
...
Use 32-bit variable for 32-bit read
2019-02-25 13:21:55 +01:00
86ed86c2a2
Use 32-bit variable for 32-bit read. (Also fixes DEBUG compile
...
error due to mismatch of format and argument.)
2019-02-24 17:49:30 -08:00
56fb0f7766
Handle STM32F730 and STM32H750.
...
Flash sector calculation was wrong with small flash sizes.
2019-02-21 19:19:10 +01:00
3f8c40d3f5
Fixing stm32l4 target to allow probing w/o halting
2019-02-21 18:06:38 +01:00
8de1b45c85
Kinetis KE04: Flash and debug support
...
Support for Kinetis KE04 8KiB, 64KiB and 128KiB variants in nxpke04.c
Target monitor commands for sector and mass erase.
Changes to kinetis.c MDM-AP target to support KE04.
Only KE04Z8 tested in HW.
2019-02-17 22:48:23 +01:00
02c1934c03
Added ability to lock and unlock boot rom for samd controllers
2019-02-13 16:33:07 -08:00
0b28232f72
[efm32] Assume Device Identification (DI) version 1 if we don't know the OUI ( #402 )
...
* [efm32] Assume Device Identification (DI) version 1 if we don't know the OUI
Silabs are using some additional OUIs we don't know about. Reported in issue #389
These should use a DI version 1 layout, so assume version 1 layout for OUIs we don't
know. However do print a notice about this on DEBUG() as suggested by @UweBonnes
The IDCODE value is sufficient to make a positive identification of an EFM32 device.
See AN0062 Section 2.2. Therefore accepting any OUI is reasonable behaviour.
Additionally the part familiy is checked, and the target rejected if not in the
`efm32_devices` table. This commit makes that rejection explicit, although it does
not change the logical behaviour here.
Note that the important registers (part number, part family, flash size) are at the
same addresses in both layouts anyhow. Currently only `efm32_cmd_serial` and
`efm32_cmd_efm_info` functions use registers that differ between DI versions.
* [efm32] tidy format warning about portability UB
* [efm32] Simplify OUI checking
* Only read the OUI once
* Accept the device even if the OU is unknown, as silabs have been using
a variety of OUIs
* Perform fewer register reads before checking the device family is valid
2019-01-16 09:58:59 +13:00
7cc02867ae
stm32f4: Fix problems with small flash sizes creating overflow or empty regions.
...
Thanks to "DerMeisteRR" for pointing out.
2019-01-09 12:23:49 +01:00
47fad2bf7f
Add Stm32L41x.
2019-01-09 12:23:49 +01:00
f0c6e2bbd2
Add STM32G07x.
2019-01-09 12:23:49 +01:00
0793dac2cf
libftdi: Allow to compile with mingw and cygwin and use recent libftdi1.
...
Tested with x86_64-w64-mingw32-gcc-8.2.0 and cygwin gcc (GCC) 7.3.0.
Use libftdi1 unconditionally.
Try to convice github travis to use libftdi1.
Remove unportable "uint ". Thanks to jacereda for pointing out in #400 .
2019-01-07 15:31:57 +01:00
3f0c9ccee1
Fix support for LPC1115 and LPC1115XL devices ( #415 )
...
* Add support for LPC11U3X devices.
The DeviceID register has a different address from the LPC11XX devices.
But it is shared with the LPC8XX family.
* Fix support for LPC1115 and LPC1115XL devices
* Fix whitespace
2019-01-07 13:34:00 +13:00
02b9d5f1ac
Add delay to cortexm_reset
2019-01-07 13:32:17 +13:00
d7e2923990
Debug on stm32f1_flash_erase errors
2019-01-07 13:32:17 +13:00
9ce05ae67b
stm32h7/f7: Store DBGMCU_CR on attach() and restore on detach().
...
On STM32[FH]7, DBG_SLEEP must be set for debugging.
2019-01-07 13:22:01 +13:00
8d6092b73f
cortexm_forced_halt: Only release SRST after "Halt on reset" command.
...
This should make life easier if program remaps JTAG/SWD pins so that
with program running, JTAG/SWD access is impossible.
2019-01-07 13:22:01 +13:00
3ebf049424
cortexm: Only force halt before probe if idcode is unknown and ROM TABLE unreadable.
2019-01-07 13:22:01 +13:00
6633f74d95
stm32h7/f7: Write DBGMCU_CR only on attach.
...
Split probe/attach for STM32H7.
2019-01-07 13:22:01 +13:00
8575d3e7a6
stm32f7/h7: Use the DPv2 provided idcode for MCU identification.
2019-01-07 13:22:01 +13:00
525b90d4e5
cortexm: Only force halt before probe() if probe was forced.
2019-01-07 13:22:01 +13:00
da75acf015
adiv5: Only force cortexm_probe() once.
2019-01-07 13:22:01 +13:00
489f24584b
adiv5: Read TARGETID on DPv2 devices.
2019-01-07 13:22:01 +13:00
cde7726b87
cortexm: detach still needs extra cycles.
2019-01-07 13:22:01 +13:00
14bedcc441
Add support for LPC11U3X devices.
...
The DeviceID register has a different address from the LPC11XX devices.
But it is shared with the LPC8XX family.
2018-10-04 08:53:05 -07:00
91dd879dac
Another nRF52 ID.
2018-09-13 16:18:29 -06:00
f5cf6d4497
adiv5_swdp: Add extra idle cycles with write transactions.
...
These extra cycles are needed by some CPU, e.g. STM32L0x1 to cross the SWCLK
/HCLK domains. Revert insufficient #373 also tackling that problem.
Thanks to Thorsten von Eicken for pointing out.
2018-09-06 17:29:20 +02:00
f39701c4c8
Move the LPC17xx probe function down since it performs an IAP call which can hang when performed on other devices than a LPC17xx
2018-09-05 17:40:02 +02:00
c5c0783337
Merge pull request #378 from markrages/nordic_unlock
...
Add extra port for mass erasing / unprotecting nRF52 with APPROTECT set.
2018-07-28 14:56:03 +12:00
d0a8ce0819
Add extra port for mass erasing / unprotecting nRF52 with APPROTECT set.
...
Mostly copied from the equivalent in kinetis.c and
https://devzone.nordicsemi.com/f/nordic-q-a/12484/approtect-and-dap/47301
2018-07-27 16:07:19 -06:00
6fd3ede5c7
Merge pull request #377 from markrages/add_id_2
...
Another chip ID for Nordic nRF52832.
2018-07-28 09:53:00 +12:00
cb8596b0b2
Another chip ID for Nordic nRF52832.
2018-07-27 15:09:14 -06:00
5918608156
STM32F7: Debug does not work with WFI without DBG_SLEEP
2018-07-27 10:59:54 +02:00
2c1c913213
adiv5.c: Add units found on M7.
2018-07-27 10:59:54 +02:00
f234074099
stm32h7: Start of support.
...
Implement probe, memory map, erase, write, uid, crc, parallelism.
2018-07-27 10:59:54 +02:00
a988bba035
Merge pull request #372 from richardeoin/efm32-1
...
[efm32] Add support for EFM32 devices with different DI and MSC layouts
2018-07-27 11:41:58 +12:00
d7b173ab39
Merge pull request #310 from UweBonnes/stm32l4r
...
arget/stm32l4.c: Add stm32l4r series and clean up.
2018-07-27 10:32:00 +12:00
b4dc666aca
Add nRF52 QIAA C0
2018-07-26 23:13:38 +01:00
4a312c7697
target/stm32l4.c: Add stm32l4r series and clean up.
2018-07-22 15:44:00 +02:00
7034d0bb94
stm32l4: Option byte loader must be started with flash unlocked!
...
Warn user that device will loose connection.
2018-07-22 15:44:00 +02:00
83f9655f6e
stm32l4: Fix wrong default for WRP2A option halfword.
2018-07-22 15:44:00 +02:00
139707c5c0
cortexm/detach: Add a dummy transaction after cleaning DHCSR.
...
This replaces the seemingly superflous swdptap_seq_out() at
the end of adiv5_swdp_low_access() needed to continue after detach.
2018-07-19 10:57:41 +02:00
a7106bd346
[efm32] Add support for flashing User Data (UD) and Bootloader (BL) regions
...
* UD region on all devices, some devices also have BL region
* Fix page size for EZR32HG
2018-07-18 08:57:01 +00:00
55bb96cfdb
[efm32] tidy compiler warning
2018-07-16 20:47:24 +00:00
98faaceb70
[efm32] Add support for EFM32 devices with different DI and MSC layouts
...
* DI layout is identified by attempting to read OUI from both layouts
* MSC address is passed to flashstub in r3
Retested EZR32LG230 (EZR Leopard Gecko M3)
Tested EFR32BG13P532F512GM32 (EFR Blue Gecko)
Achieves aims of PR #264 (I think) Thanks to @dholth and @ryankurte for inspiration
Fixes Issue #226
2018-07-16 20:18:36 +00:00
59d6eca8f0
Fixes option erase for STM32F070x6 STM32F070xB STM32F030xC
2018-07-10 18:44:05 +03:00
c5713ea8d3
Merge pull request #366 from UweBonnes/f7_fix
...
stm32f4.c: F76x also has large sector by default.
2018-07-07 13:03:14 +12:00
1b51c4961e
Merge pull request #363 from korken89/master
...
Removed debug bits for F4/F7 target, same as all other MCUs now
2018-07-07 13:01:05 +12:00
50514ccc31
stm32f4.c: F76x also has large sector by default.
2018-07-05 13:29:43 +02:00
5e8c8cae10
Removed debug bits for F4/F7 target, same as all other MCUs now
2018-06-28 16:31:34 +02:00
5548d54626
common/swdptap: some clean up.
...
Remove superfluous transaction.
Use native variable size.
2018-06-26 19:50:14 +02:00
7e3fe352ad
adiv5_swdp.c: Use swdptap_seq_out for initialiation sequence.
2018-06-26 19:50:14 +02:00
b2defad844
Merge pull request #356 from UweBonnes/probe_halted
...
Probe halted
2018-06-21 10:06:56 -07:00
b59bbac0b2
stm32l4: Use buffered direct write to flash.
2018-06-16 13:30:53 +02:00
891d6de8eb
stm32f1.c: Use buffered direct write to flash with half word access.
2018-06-16 13:30:53 +02:00
f1752c7a1a
stm32f4: Allow DWORD parallelism.
...
Needs external VPP!
2018-06-16 13:30:53 +02:00
15312eb86c
stm32f4: Honor parallelism also for erase.
2018-06-16 13:30:53 +02:00
bfeb6f0db9
stm32f4: Use buffered direct flash write with choosen size.
2018-06-16 13:30:53 +02:00
54f73858f9
Provide a target function to write with given size.
2018-06-16 13:30:08 +02:00
17b817f37b
cortexm: Allow to set timeout to wait for halt.
...
This allows to gain access to devices spending long time in WFI without
the need for a reset, at the expense of possible long waiting times.
Using Reset means loosing the device runtime context.
2018-06-13 14:03:50 +02:00
9e365a58f7
Cortex-M: Try harder to halt devices in WFI.
...
E.g. STM32F7 and L0 need multiple C_DEBUG and C_HALT commands to halt
the device.
2018-06-13 14:02:43 +02:00
66e357d517
Cortex-M: Probe Cortex-M even if ROM table read fails.
...
Rom table in some devices (e.g. STM32L0/F7) can not be read while
device is in WFI. The Cortex-M SWD signature is however available.
If we know by that signature, that we have a Cortex-M, force a
probe for Cortex-M devices.
2018-06-13 13:04:17 +02:00
ae6f0eadc9
Support for MSP432 TI MCUs ( #353 )
...
Introduces flashing and debugging support for Texas Instruments MSP432
series of MCUs
2018-06-07 08:34:21 +12:00
077e455a94
Setting the driver string on scan.
...
This way swdp_scan and jtag_scan commands will show the chip that was
detected instead of the generic STM32F4 string. The generic name is
most confusing when attaching to an STM32F7 target.
2018-06-01 12:46:14 -07:00
df05d7ce7b
libftdi: Allow device specific port/pin to read SWD bitbanged.
...
Gracefully abort swd scan if devices can not do SWD.
Best effort to indicated SWD capability on existing cables and
add descriptions for the cables.
2018-05-30 19:21:03 +02:00
f3cacba219
libftdi: Flush buffer with detach.
2018-05-30 19:21:03 +02:00
48d232807e
Merge pull request #337 from adamgreig/stm32f4-ram-size
...
Update maximum RAM sizes for F4 and F7 devices
2018-04-26 13:38:11 +12:00
e1cefb2031
Update maximum RAM sizes for F4 and F7 devices
2018-04-24 11:06:07 +01:00
93f3b14b68
stm32f1(f0): Do not read normal device registers during probe.
...
Device may not be halted and memory map setup may fail.
2018-04-23 11:06:08 +12:00
a0596a0dcc
stm32l4: Build Memory Map during attach.
...
Reading target registers while target not halted may fail and result in
invalid memory map.
2018-04-23 11:06:08 +12:00
5f404cdbc0
Construct memory map on the stack
...
The memory map uses 1k of SRAM and is only needed during attach. Release
after use lowers pressure on SRAM.
2018-04-23 10:51:04 +12:00
63967346cd
stm32f4: Don't duplicate resources on reattach.
2018-04-23 10:48:05 +12:00
00decb3718
target: Separate function to free memory map.
2018-04-23 10:48:05 +12:00
1fd2a24c2d
stm32f4: Only construct memory map at attach.
2018-04-23 10:48:05 +12:00
9d7925792f
Merge branch 'master' into always_buffer_flash
2018-04-23 10:40:20 +12:00
fa62403ee3
nrf51: Add nRF51802 device id. ( #331 )
2018-04-03 10:45:56 +12:00
cfaa5ea963
Merge branch 'korken89-master'
2018-03-27 13:01:06 +13:00
76bfb4929d
Use lowercase register names.
2018-03-27 13:00:39 +13:00
a3f855ce5c
Merge branch 'master' of https://github.com/konsgn/blackmagic into konsgn-master
2018-03-27 08:03:03 +13:00
31965a5bbc
Added support for k64 ( #301 )
2018-03-25 14:43:33 -07:00
471ce2547c
Added LPC17xx support ( #317 )
2018-03-25 12:53:30 -07:00
a41d8cb97a
Another nRF52 device id. ( #315 )
2018-03-25 12:37:51 -07:00
1ee6d4503e
Update to split 'special' into its sane parts (update from @mubes)
2018-03-24 16:44:59 +01:00
04fbabb299
mkl27 support
2018-01-21 23:43:01 -05:00
1fe870b8df
added MKL27<128kB support
2018-01-16 13:23:36 -05:00
Uwe Bonnes
Richard Meadows
Artur Maciuszonek
Ken Healy
Kirill Zhumarin
dpslwk
Thomas Bénéteau
Gareth McMullin
Sylvain Munaut
Stephen Roe
Simon Rasmussen
David R. Piegdon
Alexander Zhang
David Lawrence
Jeremy Elson
Boris Sorochkin
newbrain
anyn99
Carl
Ingmar Jager
Josh Robson Chase
Ingmar Jager
Mark Rages
Rik van der Heijden
Mike Walters
Richard Meadows
Antti Louko
Emil Fresk
newbrain
Piotr Esden-Tempski
Adam Greig
Christopher Woodall
Akila Ravihansa Perera
Mark Rages
Konsgn