haskal
/
kicad
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
26,458 Commits 9 Branches 105 Tags 1.3 GiB
Commit Graph

11424 Commits

Author SHA1 Message Date
Marek Roszko dc4b73fcef Correct m_board check location in PNS_KICAD_IFACE_BASE::SyncWorld 2021-02-01 11:58:22 -05:00
Marek Roszko 9d0b16e814 bool/int type safety 2021-01-31 19:54:32 -05:00
Jeff Young 89d3b0b670 Remove breakage of corner pinning in point editor. 
For some reason the post-pinned local variable references were replaced
with calls to the points themselves (which are the pre-pinned values).

Fixes https://gitlab.com/kicad/code/kicad/issues/7291
 2021-02-01 00:35:45 +00:00
Seth Hillbrand 8778599c0d Apply same nettie hack to zone filler 
The nettie hack is used in DRC but we also need to use it in zone filler
to allow zones to be used with netties.  We limit this to the
appropriate nets in the nettie

Fixes https://gitlab.com/kicad/code/kicad/issues/7351
 2021-01-31 16:16:48 -08:00
Marek Roszko 991c8fbf8f Use the new nudge path for the footprint lib table, save global and project mru differently 2021-01-31 19:01:33 -05:00
Seth Hillbrand 1a3ab551cf Cleanup 
FindLineSegmentIntersection() was refactored in 2012 but there are a few
uses that didn't get updated.  This finalizes the cleanup

Fixes https://gitlab.com/kicad/code/kicad/issues/7365
 2021-01-31 15:55:52 -08:00
Seth Hillbrand 8567739a7a Remove conditions from common immediate-mode keys 
The conditions prevent use in immediate mode for common actions.  While
this makes enable/disable easier in menu items, this fix is a patch
until we refactor the action framework to distinguish between immediate
mode hotkeys that should start without selections and menu items that
need a selection before running.

Fixes https://gitlab.com/kicad/code/kicad/issues/5333
 2021-01-31 14:45:24 -08:00
Seth Hillbrand b54e951ed8 Fix a couple of checks in Fabmaster 2021-01-31 14:12:40 -08:00
Marek Roszko 8f21034254 Fix invalid windows macro 
Missing one underscore at the end
 2021-01-31 16:15:50 -05:00
Marek Roszko 051621a2ca Use M_SQRT1_2 in place of the number 2021-01-31 15:47:23 -05:00
Marek Roszko 3d45668354 Fix typo in TRACK::GetEndY 2021-01-31 15:43:12 -05:00
Marek Roszko 21fe8542df Remove shadowing of identical base m_parser member 2021-01-31 12:56:27 -05:00
Jon Evans abf0a46dce Refactor PICKER_TOOL and push up snapping disable functionality 
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7348
 2021-01-31 09:50:41 -05:00
Jon Evans a45b86d2ba Fix Coverity warning 2021-01-31 09:50:41 -05:00
Jeff Young a868fb97b6 Preserve Uuids when editing board footprints. 
One way to do this would have been to keep the Uuids in the editor
copy.  However, this opens us up to errors if we forget a Save As or
export path and end up writing the Uuids out somewhere else.

In the end, it felt safer to store a map of the original Uuids and
restore them if we happen to save the editor footprint back to the
board.

Fixes https://gitlab.com/kicad/code/kicad/issues/7312
 2021-01-31 14:09:59 +00:00
Thomas Pointhuber 70e6d0e79f altium: use those new fancy user definable layers and import the name from Altium 2021-01-31 11:15:08 +01:00
Jeff Young 56ea55ae9c Make sure that NPTH pads still get handled in copper clearance checker. 
... because that's where we do hole-to-copper clearance testing.

Also augments the Clearance Resolution reporter to report on said
hole clearances.

And changes the interpretation of HOLE_CLEARANCE_CONSTRAINT to include
local pad clearance overrides.

Fixes https://gitlab.com/kicad/code/kicad/issues/7325
 2021-01-31 00:33:35 +00:00
Thomas Pointhuber 6a9e1ecf9e altium: Center board after import 2021-01-30 17:43:02 +01:00
Jeff Young 41234a8373 Implement more precise annotation-required messages. 
Also moves the message to an infobar so it's more noticeable.

Fixes https://gitlab.com/kicad/code/kicad/issues/7332
 2021-01-30 16:31:27 +00:00
Jeff Young a235103e48 Redo pad & via painting (again). 
New strategy isolates all draw/don't draw decisions to the ViewGetLOD
routines, and all dimmed/not dimmed to PCB_RENDER_SETTINGS::GetColor.
The actual drawing in PCB_PAINTER is more-or-less conditon free.

Also adds new layers for pad and via hole walls so that they can be
controlled for high-contrast mode.

Also changes the drawing paradigm so that the pads are drawn even when
not on the high contrast layer, just in low contrast.  The hole wall
is drawn in high contrast.  This actually makes things clearer to the
user (although to be honest was done to keep from having to re-render
pads when the high contrast layer changes since we have two separate
layers now that we can adjut colours on).

Fixes https://gitlab.com/kicad/code/kicad/issues/7328
 2021-01-30 16:31:27 +00:00
Jeff Young 488a5b7567 Draw via holes in high contrast when they cross a high contrast layer. 2021-01-30 16:31:27 +00:00
Seth Hillbrand 6b685dfb3f Fix the knockout conditions 
We need to knock out thermal clearance for same net pads but this
doesn't need to be placed in the regular clearance area (probably).

Fixes https://gitlab.com/kicad/code/kicad/issues/7321

Fixes https://gitlab.com/kicad/code/kicad/issues/7340
 2021-01-30 08:15:00 -08:00
Seth Hillbrand 73886aecb1 Ensure partially triangulated polys are not valid 
Moves rule area triangulation outside of layer iterator and keeps the
triangulation_valid flag false until the triangulation has been
completed.

Fixes https://gitlab.com/kicad/code/kicad/issues/7032
 2021-01-29 16:33:57 -08:00
Seth Hillbrand 386ead30c5 All circle and arc tools to select all at first 
Non-layer elements can be logical centers for the circle and arc tools.
We allow the non-layer to snap for the center points and revert to only
on-layer elements after

Fixes https://gitlab.com/kicad/code/kicad/issues/7327
 2021-01-29 10:14:44 -08:00
Seth Hillbrand 553166f932 Handle ARC bbox in tracks 
Need to handle arcs separately to ensure we get the full bounding box

Fixes https://gitlab.com/kicad/code/kicad/issues/7318
 2021-01-29 09:07:23 -08:00
Marek Roszko 30ba3aa240 Get python loading the new "user scripting" paths 2021-01-28 23:45:53 -05:00
Marek Roszko 43fd416d13 Flip the footprint new library flow to prompt global or project first 2021-01-28 20:15:44 -05:00
Jon Evans b5e9a949bc Selection: skip sloppiness pruning if invalid 
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7320
 2021-01-28 19:51:29 -05:00
Jeff Young 74a5db64c2 Update pad netnames (and numbers) to the new visibility architecture. 2021-01-28 23:31:38 +00:00
Jeff Young 21bec6c016 Comment. 2021-01-28 23:31:38 +00:00
Jeff Young 6983bcd55b Push addition of shape width down into computeArcBBox. 
Also improves performance by calling GetBoundingBox only once (this
is not always an inexpensive routine for some items, such as
polygons).
 2021-01-28 22:29:28 +00:00
Seth Hillbrand 1733a23ac7 Take width into viewBBox account 
Don't let objects disappear until their full extend has been removed
from view.

Fixes https://gitlab.com/kicad/code/kicad/issues/7318
 2021-01-28 14:20:13 -08:00
Seth Hillbrand 714430fefa Flash pads when connected by zone 
Zone connections (even half-connections) should trigger the connected
logic in flashPads.  This removes the double-standard for painting pads
and imposes thermal standoff based on the net connection to the pad if
it shares a net, not just if connected
 2021-01-28 13:21:22 -08:00
Jeff Young 1a7b7e84c6 Use consistent terminology for component placement files. 
CHANGED footprint positions files -> component placement files.

Not all footprints get placed, so component is a more neutral word.
Use of "placement" instead of "positions" removes the double-plural
that makes footprint positions files such a mouth-full.

Fixes https://gitlab.com/kicad/code/kicad/issues/7097
 2021-01-28 19:24:55 +00:00
Jeff Young 636ae012ed Overhaul the pad drawing special cases yet again. 
New strategy is to draw the hole wall cylinder if the pad (or via)
isn't flashed on a particular layer.  This is (1) more correct,
(2) keeps pads which aren't flashed on any layer from disappearing,
and (3) allows us to remove a bunch of the other special cases.

Or at least I think it does.  The proof will be in the (lack of)
follow-on bug reports....

Also fixes a bug where via annular rings weren't highlighted in
high contrast mode.

Fixes https://gitlab.com/kicad/code/kicad/issues/7279
 2021-01-28 17:02:42 +00:00
Seth Hillbrand 2ef00e9de4 Rebuild ratsnest when importing netlist 
Fixes https://gitlab.com/kicad/code/kicad/issues/7287
 2021-01-27 17:57:00 -08:00
Seth Hillbrand 89a72df0b1 Fix a few FABMASTER issues 
- Custom pads now properly supported with offset/rotation
- Fix missing pads from alternate layers

Fixes https://gitlab.com/kicad/code/kicad/issues/7299
 2021-01-27 17:50:14 -08:00
Ian McInerney beb50c529e Reorganize the CMake folder to separate build and configure steps 
The BuildSteps folder now contains the CMake scripts that are
called during the build process as individual stages, while
the root CMakeModules directory contains the CMake files used
during the configuration phase.
 2021-01-28 00:24:22 +00:00
Marek Roszko 2807a37fc0 Create a stock scripting path helper 2021-01-27 19:12:18 -05:00
Marek Roszko e6dd95e83a Create a default user projects folder 2021-01-27 19:12:18 -05:00
Marek Roszko 28c6967dbc Start trying to shuffle around path management 2021-01-27 19:12:18 -05:00
Wayne Stambaugh 6a39b81647 Fix the last of broken Doxygen comment specifiers. 2021-01-27 17:39:44 -05:00
Mikołaj Wielgus 3e42ba18a9 Show dragging tools in context selection menu for components 
Show the dragging tools in the context selection menu when a single
component is selected. Prevent the dragging tools from appearing when
more than one object is selected, as they will not activate anyway.

Fixes https://gitlab.com/kicad/code/kicad/issues/7258
 2021-01-27 19:55:42 +00:00
Jeff Young 06a0094597 Minor improvements to layer highlighting. 2021-01-27 14:52:22 +00:00
Jon Evans bb79eb0e45 Fix typo causing no netnames in SPECCTRA export 
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7298
 2021-01-26 22:04:45 -05:00
Jon Evans 1e030655cd Always create project when doing a Save As on a board with a project 2021-01-26 21:58:17 -05:00
Jon Evans bea310569b Fix parsing of track/via user sizes from legacy boards 
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6134
 2021-01-26 21:51:36 -05:00
Jon Evans 30f3a7d124 Rework high contrast for pads/vias slightly 
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6923
 2021-01-26 21:02:11 -05:00
Jon Evans 79f94c096e Rename legacy selection filter action to avoid confusion 
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7290
 2021-01-26 18:15:36 -05:00
Seth Hillbrand aefc107d86 Fix button sizing 2021-01-26 13:42:02 -08:00
Seth Hillbrand 9a51a75403 Confirm when cancelling a changed custom rule 2021-01-26 08:18:38 -08:00
Jeff Young 1e9639e89c Save pintype alongside pinfunction (in pads). 
Fixes https://gitlab.com/kicad/code/kicad/issues/7283
 2021-01-26 15:28:48 +00:00
Jeff Young 0e7c18119e Make sure pads are unlocked when editing footprint from board. 
Fixes https://gitlab.com/kicad/code/kicad/issues/7274
 2021-01-26 15:28:48 +00:00
jean-pierre charras 2e58826338 Minor fix: remove an unwanted font setting from panel_setup_constraints_base.fbp 
that cannot be removed using wxFormBuilder due to a bug in wxFormBuilder.
 2021-01-26 14:03:12 +01:00
Jeff Young 5a5f96bd9f More consistent naming. 2021-01-26 11:41:47 +00:00
Jeff Young b165ae6519 Fix note formatting issues. 
Also removes the "tip" icon which doesn't work on OSX and isn't as
important as the graphics which actually convey information.  Replaced
with the more generic "Note: " string.

Fixes https://gitlab.com/kicad/code/kicad/issues/7281
 2021-01-26 11:29:30 +00:00
Jeff Young 7d6c1c5ee6 Improve comments. 2021-01-26 10:56:19 +00:00
Jeff Young dca7e44455 Fix a missed Module -> Footprint. 2021-01-26 10:56:19 +00:00
Jon Evans b96bcc86b1 Don't restrict start item to same layer if snapping is enabled 
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7276
 2021-01-25 21:19:26 -05:00
jean-pierre charras 96af236493 Code cleanup: remove include wx.h from pcb_plot_params.h. 
including wx.h is useless for this file, and include wx.h in a lot of other files.
Include wx.h must be made only when needed in a given file, because on Windows
it include some headers that frequently create collision with kicad declarations
 2021-01-25 16:18:46 +01:00
Michael Kavanagh d933a0a863 Use the pencil for Properties in Pcbnew 2021-01-25 14:21:23 +00:00
Michael Kavanagh eba09a59e9 Remove inappropriate icon 2021-01-25 14:21:22 +00:00
Jeff Young 09eb4b35c6 Make sure footprint edges get checked. 
Fixes https://gitlab.com/kicad/code/kicad/issues/7267
 2021-01-25 13:20:16 +00:00
Jeff Young d40fe127aa Update pad locked status when adding footprints from schematic. 
Also fixes some latent bugs with not updating the local ratsnest
visibility in other places, and the netcode in update PCB from schematic.

Fixes https://gitlab.com/kicad/code/kicad/issues/7202
 2021-01-25 01:20:36 +00:00
Seth Hillbrand 5a9c0a9b5a Quiet a few coverity warnings 2021-01-24 14:53:18 -08:00
Seth Hillbrand 47d5900600 Fix build warnings 2021-01-24 11:37:48 -08:00
Mikolaj Wielgus 04cc64c008 Restore the old reference after rotation or flip instead of clearing 
After a rotation or flip the reference point has to be restored to the
previous value to prevent the dragged item from warping to the cursor.
Before this change, the reference point was only cleared, causing odd
behavior when a rotation or flip was performed.

Fixes https://gitlab.com/kicad/code/kicad/issues/7112
 2021-01-24 18:56:46 +00:00
Roberto Fernandez Bautista f353fc448b Fix edge cases in EDIT_TOOL::DragArcTrack 2021-01-24 16:41:11 +00:00
Roberto Fernandez Bautista 99d203feae Clarify CIRCLE::ConstructFromTanTanPt 
Remove unused bool aAlternateSolution and add doxygen comments
 2021-01-24 16:41:11 +00:00
Roberto Fernandez Bautista 48823c0723 Formatting fixes and fix qa_kimath following rebase 2021-01-24 16:41:10 +00:00
Roberto Fernandez Bautista 6e7ae93cc8 EDIT_TOOL::DragArcTrack Fix incorrect undo history when items are deleted 
Need to make sure we only apply one COMMIT operation per object before calling COMMIT::Push() or COMMIT::Revert()
 2021-01-24 16:41:10 +00:00
Roberto Fernandez Bautista 2b5c1bae97 CHANGED: Dragging a curved track starts an interactive resizing of it, keeping start an end points tangent 2021-01-24 16:41:10 +00:00
Jeff Young 25956152c6 Scan actual nets; not assumed nets. 
Specctra exporter should not assume that PCB nets are numbered
sequentially without any holes.

Fixes https://gitlab.com/kicad/code/kicad/issues/7249
 2021-01-23 22:55:03 +00:00
Jeff Young d5d9372839 Don't cancel dialog when esc-ing out of autocomplete. 2021-01-23 22:55:03 +00:00
jean-pierre charras 15cc368918 Gerber plotter: prepare optimization of aperture macros type free polygons. 
They are used for chamfered round rect pads, and can be used for custom shaped pads.
No actual change currently, but the shape rotation of custom pads and chamfered rr pads
can be now used in gerber plots.
 2021-01-23 21:15:27 +01:00
Jeff Young d8c7c8f700 Evaluate rules when fetching zone edge clearance. 2021-01-23 17:04:44 +00:00
Jeff Young 2d8cac658e Allow negative clearances to signal supression of DRC test. 2021-01-23 00:10:01 +00:00
Jeff Young 0ba0160da9 Add a PT_NIC pin electrical type and a netlist token for SCH_NO_CONNECT. 
ADDED a new pin electrical type "free" for internally unconnected pins.

CHANGED the "unconnected" pin electrical type is now represented by
"no_connect" in files and netlists.  (The legacy syntax is also accepted
in files.)
 2021-01-23 00:10:01 +00:00
Jeff Young f5e35af1a5 Transmit pin electrical types through to pads. 2021-01-23 00:10:01 +00:00
Jeff Young 9ac807bdd2 Freeze implicit footprint file version at last before explicit. 
We have been writing footprint versions for a while now, but we were
still interpreting the lack of a version as "current".  This changes
lack of a version to mean "last format before we started writing out
versions".

Fixes https://gitlab.com/kicad/code/kicad/issues/7143
 2021-01-23 00:10:01 +00:00
jean-pierre charras cbff706916 Update the .fpb file to be able to open it with wxFormBuilder 3.9, used by Kicad 2021-01-21 20:28:05 +01:00
Jeff Young 3fcd0860c1 Make 'E' go straight to Custom Track Width dialog. 
Also fixes some mouse capture issues.

Fixes https://gitlab.com/kicad/code/kicad/issues/7198
 2021-01-20 18:19:55 +00:00
qu1ck 07d4a28024 Improvements to pcbnew action plugins settings panel 
1. Add open plugins directory button (same as in tools menu)
2. Add show plugin errors button to help debug issues
 2021-01-20 09:09:53 +00:00
Roberto Fernandez Bautista 74aa081b8a Don't add board-only footprints to the netlist (fixes back-annotation issue) 2021-01-20 00:37:38 +00:00
Jeff Young 360953ba98 "comp" -> "symbol". 2021-01-19 23:50:40 +00:00
Jeff Young 0ded846130 Go back to previous arc midpoint editing routine. 
It avoids erratic behaviour near the chord or end-points.

Fixes https://gitlab.com/kicad/code/kicad/issues/7135
 2021-01-19 23:50:40 +00:00
Michael Kavanagh 80dbc24326 Icons: remove superfluous icon 
Remove icons where menu text gives context
 2021-01-19 22:57:25 +00:00
Michael Kavanagh ef2aa8a730 FP Editor: remember to update appearance manager 
Fixes https://gitlab.com/kicad/code/kicad/issues/6926
 2021-01-19 20:24:16 +00:00
Seth Hillbrand 060635b14c fabmaster: Fix graphic handling in geometry section 2021-01-19 12:16:40 -08:00
Jeff Young 35978adef9 Don't run dimension updates while parsing files. 
They mess up the geometry when only partial values are provided.

Fixes https://gitlab.com/kicad/code/kicad/issues/7177
 2021-01-19 16:09:44 +00:00
Jeff Young 25ff0fa662 Fix typo in unit label assignment and some minor layout improvements. 2021-01-19 16:09:44 +00:00
Jeff Young e9dc1824d6 Minor improvements to layout. 2021-01-19 16:09:44 +00:00
Jeff Young 06dec36625 Improve layout and terminology in PCBNew/FPEditor edit settings. 2021-01-19 13:16:26 +00:00
Jeff Young 1ac47c2ac6 Fix misleading tooltip. 2021-01-19 11:05:25 +00:00
Jeff Young 0a2a3c9903 Fix Coverity-discovered typo. 2021-01-19 10:57:07 +00:00
Jon Evans 330d717c69 Fix typo 2021-01-18 21:50:26 -05:00
Michael Kavanagh 7461b96dea Hide the selection tool submenu in the FP Editor 
Fixes https://gitlab.com/kicad/code/kicad/issues/7164
 2021-01-19 00:30:44 +00:00
Jeff Young 12fe44d4b3 Snap arc center *by* the grid, not *to* the grid. 
Also fixes a bug with editing an arc endpoint because the cursor pos
was being forced before the arc constraints stuff had been run (in
updateItem()).
 2021-01-19 00:26:31 +00:00
Seth Hillbrand b8dfcb34c4 Revert "Use less-sophisticated arc editing math." 
This reverts commit 3b424d3868.  And fixes
issue with rouding causing arc errors
 2021-01-18 12:44:27 -08:00
Ian McInerney 44655b98de Initialize variables properly 2021-01-18 18:35:10 +00:00
Ian McInerney d030d1667b Fix improper string creation in fabmaster importer 2021-01-18 18:35:10 +00:00
Jon Evans 1e33928b96 Fix issues with zone filling connectivity locking 
Two issues found with the locking system used to prevent access to
stale connectivity data during the zone fill process:

1) a std::mutex has undefined behavior if you try to use it to guard
against access from the same thread.  Because of the use of wx event
loops (and coroutines) it is entirely possible, and in some situations
inevitable, that the same thread will try to redraw the ratsnest in the
middle of zone refilling.

2) The mutex was only guarding the ZONE_FILLER::Fill method, but the callers
of that method also do connectivity updates as part of the COMMIT::Push.
Redrawing the ratsnest after the Fill but before the Push will result in
stale connectivity pointers to zone filled areas.

Fixed (1) by switching to a trivial spinlock implementation.  Spinlocks would
generally not be desirable if the contention for the connectivity data crossed
thread boundaries, but at the moment I believe it's guaranteed that the reads
and writes to connectivity that are guarded by this lock happen from the main
UI thread.  The writes are also quite rare compared to reads, and reads are
generally fast, so I'm not really worried about the UI thread spinning for any
real amount of time.

Fixed (2) by moving the locking location up to the call sites of
ZONE_FILLER::Fill.

This issue was quite difficult to reproduce, but I found a fairly reliable way:
It only happens (for me) on Windows, MSYS2 build, with wxWidgets 3.0
It also only happens if I restrict PcbNew to use 2 CPU cores.
With those conditions, I can reproduce the issue described in #6471 by
repeatedly editing a zone properties and changing its net.  The crash is
especially easy to trigger if you press some keys (such as 'e' for edit)
while the progress dialog is displayed.  It's easiest to do this in a debug
build as the slower KiCad is running, the bigger the window is to trigger this
bug.

Fixes https://gitlab.com/kicad/code/kicad/-/issues/6471
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7048
 2021-01-18 13:22:12 -05:00
Jeff Young 26bc29808a Clean up Text Properties dialog. 
It's no longer used for dimensions so doesn't need the line thickness
controls.

The spacing was a bit wonky.

Changed to disabling rather than hiding visibility checkbox.  The less
the GUI moves around the better.
 2021-01-18 15:20:15 +00:00
Jeff Young 4f399d4304 One more attempt to fix flipping geometry. 
Fixes https://gitlab.com/kicad/code/kicad/issues/4480
 2021-01-18 15:20:15 +00:00
Michael Kavanagh 479487ceb1 Tidy up context menus a bit 
Try and put the common actions in the same places
 2021-01-17 22:42:03 +00:00
Jon Evans 6bb9aeab4b Position relative: store discarded pad for use as the selection anchor 
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6996
 2021-01-17 14:25:52 -05:00
Jeff Young f1221a9ca3 Resolve text variables in title blocks for outputing to netlist. 
Fixes https://gitlab.com/kicad/code/kicad/issues/7153
 2021-01-17 16:24:22 +00:00
Jon Evans 1754504234 Fabmaster: fix MSVC build 
std::map is not move-constructable on MSVC because
it is not declared noexcept (and is not required to be
by the standard)

This means that a struct containing graphic_element
cannot be inserted into a vector with move semantics without
compile errors.  However, wrapping it in a unique_ptr
works.
 2021-01-17 10:23:31 -05:00
Jeff Young 68efdb2fff Push shared parts of GRID_HELPERs into common. 2021-01-16 23:18:10 +00:00
Seth Hillbrand 950db6ff9c pcbnew: Add Fabmaster import 
Allows importing ASCII design output from OrCAD designs
 2021-01-16 14:28:33 -08:00
Jeff Young 3b424d3868 Use less-sophisticated arc editing math. 
While it doesn't do the tangent retention that the old version did,
this one I can at least make work.

Fixes https://gitlab.com/kicad/code/kicad/issues/7135
 2021-01-16 20:46:14 +00:00
Roberto Fernandez Bautista 00918c68f5 Don't do clever snapping logic when drawing a circle 
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7131
 2021-01-16 08:39:20 +00:00
Jon Evans 38455c25ef Bring back consideration of world scale to PcbNew snapping 
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7125
 2021-01-15 12:29:47 -05:00
Jeff Young 08d595c9bf Move title block fields to global availability in PCBNew. 
Fixes https://gitlab.com/kicad/code/kicad/issues/7118
 2021-01-15 15:41:18 +00:00
Jeff Young 7dc2ca93cd Make sure we mark board-only-footprint nets as current. 
Fixes https://gitlab.com/kicad/code/kicad/issues/6871
 2021-01-15 12:46:48 +00:00
Jon Evans 6cc39d8011 Don't allow moving locked pads with Position Relative dialog 
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6996
 2021-01-14 22:14:00 -05:00
Jon Evans 0b7fc0e2d9 Update local ratsnest state when toggling appearance control 
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7035
 2021-01-14 22:03:23 -05:00
Jeff Young 36508807e7 Give the pad placement tool a context menu. 
ADDED: allow pad properties to be edited while placing pads.

Fixes https://gitlab.com/kicad/code/kicad/issues/6953
 2021-01-15 00:52:03 +00:00
Jeff Young 965482bd7f Improve some tooltips. 
Fixes https://gitlab.com/kicad/code/kicad/issues/7116
 2021-01-14 22:35:32 +00:00
Thomas Pointhuber 9f24ea0bb7 altium: fix non-copper pads. Roundrect pads were not filled and SetLocalCoord() does not transform polygons into the local coordinates, which is unexpected. 2021-01-14 22:21:05 +01:00
jean-pierre charras 54cf67dad2 Pcbnew, drill map: fix incorrect position of texts for small boards. 
Fixes #7111
https://gitlab.com/kicad/code/kicad/issues/7111
 2021-01-14 18:52:04 +01:00
Mikolaj Wielgus 0129c7ae52 Notify appearance panel when net is (un)hidden by board inspection tool 
Fixes https://gitlab.com/kicad/code/kicad/issues/7039
 2021-01-14 17:22:41 +00:00
Jeff Young 02ccd5fbdb Make sure properties commands don't go to other tools during routing. 
Brings up the track widths (or diff pairs) context menu instead,
which seems to be the closest parallel.

Fixes https://gitlab.com/kicad/code/kicad/issues/7099
 2021-01-14 15:19:09 +00:00
Jeff Young 3e920c665f Special case via area generation. 
Fixes https://gitlab.com/kicad/code/kicad/issues/7105
 2021-01-14 12:48:44 +00:00
Mikolaj Wielgus f0b11896da Clip the first segment in leaders 
Fixes https://gitlab.com/kicad/code/kicad/issues/6548
 2021-01-14 00:10:41 +00:00
Seth Hillbrand 13a4717aed Add center handles to rectangle edits 
Allows changing a single dimension at a time.  Matching the polygon edit
tool.

Fixes https://gitlab.com/kicad/code/kicad/issues/7085
 2021-01-13 14:04:21 -08:00
Jeff Young ffdff21f45 Use a sloppier hittest for the collector as well as the actual hittest. 
Fixes https://gitlab.com/kicad/code/kicad/issues/7079
 2021-01-13 21:22:24 +00:00
Seth Hillbrand e3e9bfc1b8 Fix compile error 2021-01-13 13:21:27 -08:00
Seth Hillbrand 605dcfbedf Fix Windows script location 
Windows has arbitrary installation locations, so reference relative to
the executable
 2021-01-13 13:11:26 -08:00
Seth Hillbrand b57ad4b2f9 Correct SWIG path 
Don't offset from executable, this is an absolute path

Fixes https://gitlab.com/kicad/code/kicad/issues/7089
 2021-01-13 12:34:04 -08:00
Jeff Young da4b269783 Make sure pad local clearances get in to m_worstClearance. 2021-01-13 12:37:20 +00:00
Jeff Young 0bce280424 Make sure design rules get recompiled after netclass changes. 
Fixes https://gitlab.com/kicad/code/kicad/issues/7082
 2021-01-13 12:37:20 +00:00
Jon Evans d2d4ffe6d0 Dismiss infobar if it's dismissable on board save 
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7071
 2021-01-12 23:24:13 -05:00
Barabas Raffai 5931a39c0f Fix layer preset overwriting ratsnest settings 
Fixes https://gitlab.com/kicad/code/kicad/issues/6975
 2021-01-13 01:22:30 +00:00
Seth Hillbrand 6ed2a831d8 Don't override the router tool with drag actions 
Before processing the select tool actions, we check if the router is
currently active and if it is, pass the event for processing in other
tools

Fixes https://gitlab.com/kicad/code/kicad/issues/7021
 2021-01-12 15:44:20 -08:00
Dominik Wernberger ad97fabfd3 Add missing const to Matches 2021-01-12 20:51:32 +00:00
Dominik Wernberger dc02ec9758 Remove a few const_cast 2021-01-12 20:51:31 +00:00
Dominik Wernberger 07635d2fc7 Minor adjustments 2021-01-12 20:51:31 +00:00
Dominik Wernberger ac94d72d2d Add more const specifiers 2021-01-12 20:51:31 +00:00
Dominik Wernberger ec0af24f13 Make wxFindReplaceData argument const 2021-01-12 20:51:31 +00:00
jean-pierre charras 76cc7b98a7 Fp editor, DIALOG_PAD_PROPERTIES: do not disable posX and posY settings. 
When a pad is locked,  posX and posY settings in DIALOG_PAD_PROPERTIES must
be locked only for the board editor, not in the fp editor.
 2021-01-12 20:33:52 +01:00
Seth Hillbrand 2cb8dff650 Use KICAD_DATA for data path lookup in scripting 
Fixes https://gitlab.com/kicad/code/kicad/issues/7036
 2021-01-12 08:22:17 -08:00
Konstantin Baranovskiy cd2c46e5c9 Make "... file is read only." warnings translatable. 2021-01-12 14:33:35 +00:00
Jeff Young beab68db13 Fix bone-headed error in rules optimization. 2021-01-12 12:46:51 +00:00
jean-pierre charras d4c36230d2 Pcbnew, Graphic items: show the locked status in msg panel and dialog properties. 2021-01-12 10:00:21 +01:00
Jon Evans 01181ccb2f Make sure project is unlinked before deleting it 
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7038
 2021-01-11 22:17:13 -05:00
Michael Kavanagh a00b9cc821 Icons: general tweaks and pixel alignment 
+ minor rename
+ fix missing bitmap in DRC panel
 2021-01-11 23:31:25 +00:00
Michael Kavanagh dc83cb7a41 Icons: general tweaks and pixel alignment 
+ remove some unused icons
 2021-01-11 23:31:25 +00:00
Michael Kavanagh 32f7f30958 Icons: remove where they don't make sense 
Also avoid icon reuse
 2021-01-11 23:31:25 +00:00
Michael Kavanagh 8fba0c257b Icons: remove more inconsistencies around Select 
Missed from 5d9b2d3fea
 2021-01-11 23:31:24 +00:00
Seth Hillbrand 740df93808 Don't dereference board groups in fp editor 
The Footprint editor group resolution should stop at the footprint level
to avoid breaking into groups that cannot be accessed.

Fixes https://gitlab.com/kicad/code/kicad/issues/7049
 2021-01-11 14:58:33 -08:00
Jeff Young 63e2046eb0 Performance improvements for DRC rules. 2021-01-11 22:09:36 +00:00
Jeff Young 50889a9ed6 Promote mouse drag settings to full enums. 2021-01-11 22:09:36 +00:00
Seth Hillbrand c09dc5abdd Prevent locking items in footprint editor 
Adding footprints to the board now has a preference for whether we want
pads locked or unlocked by default
 2021-01-11 11:23:26 -08:00
jean-pierre charras 1b755bbc37 Fix issues in ConvertOutlineToPolygon() related to S_POLYGON PCV_SHAPE 
Fixes #7046
https://gitlab.com/kicad/code/kicad/issues/7046
 2021-01-11 17:05:44 +01:00
Jeff Young a4d417f5c0 Get rid of "drill" terminology when talking about finish hole size. 
Fixes https://gitlab.com/kicad/code/kicad/issues/7044
 2021-01-11 13:49:43 +00:00
RigoLigoRLC 493a784b62 Fix Pcbnew search "not found" prompt not displayed 
Before this, "Searching..." prompt will not go away if nothing was found
in a search session. A bug I noticed while working on !611. After this
fix, "foo not found" will be displayed when Pcbnew cannot find the
given text.
 2021-01-11 13:48:20 +00:00
RigoLigoRLC dd328d230b Make Pcbnew search about zone names, fixes #6951 
I put zones in "other text items" category of searching as I thought it
would be the appropriate one.

Fixes https://gitlab.com/kicad/code/kicad/issues/6951
 2021-01-11 13:48:20 +00:00
Wayne Stambaugh 1eee72ec65 Fix library tree behavior when duplicate project table entry is disabled. 
Fixes https://gitlab.com/kicad/code/kicad/issues/5438
 2021-01-11 07:46:07 -05:00
Jeff Young 6c648df4c6 Support 3 drag vs. select options, and unifiy with other drag prefs. 
Fixes https://gitlab.com/kicad/code/kicad/issues/5493
 2021-01-11 11:50:14 +00:00
Jeff Young 7134ff2da6 Try a different arrangement of Board Setup pages. 2021-01-11 11:50:14 +00:00
Jeff Young 9ce6c2be80 Group global editors under tools menu. 
Also improves some terminology in Remove Unused Pads.
 2021-01-11 11:50:14 +00:00
Seth Hillbrand 8ee324b1a9 Add bezier output to VRML 2021-01-10 11:28:15 -08:00
jean-pierre charras 067b94c410 DRC: Fix a incorrect message and marker position when testing dangling vias. 
Commit 6ffb721 detects vias connected on only one layer.
But the DRC diag (marker position and error message) were not correctly initialized
for this new test.
 2021-01-10 10:21:24 +01:00
Marek Roszko 828ecb76aa Remove polyline 3d check added by previous fixes 
Fix #7030
 2021-01-09 18:56:35 -05:00
Seth Hillbrand 4f6134b60d Check for CCW polys 
Use rectangles for 4-sided polygons that are rectangular regardless if
they are CW or CCW oriented
 2021-01-09 13:05:58 -08:00
Seth Hillbrand 8036303f8f Add margin to both sides to avoid drawing 0-poly 
We cannot draw degenerate polygons, so we need to test for 0-size shapes
especially after scaling the mask.  The mask adjustment is from both
sides however, so it needs to be doubled.

Fixes https://gitlab.com/kicad/code/kicad/issues/7020
 2021-01-09 13:05:58 -08:00
Jeff Young ed7b3373d1 Disentangle copper- and board-edge-clearances in Clearance Resolution... 
Fixes https://gitlab.com/kicad/code/kicad/issues/6983
 2021-01-09 16:44:03 +00:00
jean-pierre charras 08b93bd5ba FOOTPRINT::GetBoundingHull(): avoid returning a empty hull SHAPE_POLY_SET, 
when a footprint contains only texts.
empty SHAPE_POLY_SET creates most of time issues (crashes for instance) when
containing no data.
Ensure the returned SHAPE_POLY_SET contains a minimal hull (a 0.04 mm square)
Fixes #7026
https://gitlab.com/kicad/code/kicad/issues/7026
 2021-01-09 16:53:32 +01:00
jean-pierre charras daae68a6b8 French translation update. 
Fix also a typo in 2 I18n strings.
 2021-01-09 14:54:43 +01:00
Jeff Young 5ae6f93af8 A groups children may also have children. 
For instance, it could be a nested group or a footprint.

Fixes https://gitlab.com/kicad/code/kicad/issues/7025
 2021-01-09 13:47:24 +00:00
Jeff Young 78dcfb2392 Honour locks inside groups. 
Fixes https://gitlab.com/kicad/code/kicad/issues/6841
 2021-01-09 13:47:24 +00:00
Jeff Young 7716f20a5b Disentagle board edges from graphics in global delete. 
Fixes https://gitlab.com/kicad/code/kicad/issues/7024
 2021-01-09 13:47:24 +00:00
Jeff Young e4f29d358c Formatting. 2021-01-09 13:47:24 +00:00
Seth Hillbrand cf2dd0bd38 Fix edit_tool pad handling 
Check for footprint editor
Promote pad edits to footprint edits iff
 - Pad is locked
 - Footprint is not

Otherwise, handle the pad normally and prompt for locked items if found
 2021-01-08 19:46:14 -08:00
Seth Hillbrand 1c9d8a9f4c Don't warn on locked conversion 2021-01-08 16:49:47 -08:00
Seth Hillbrand 51f02ecc51 Fix alignment tool with locked footprints 2021-01-08 13:58:26 -08:00
Seth Hillbrand 721155165d Don't move locked footprint if pads are locked 2021-01-08 13:58:26 -08:00
Jon Evans d6448ce6b4 Expose settings manager to python 
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6989
 2021-01-08 16:47:20 -05:00
Jeff Young d0af4e9f9d Save a cancel value when asked if it's not being used to cancel. 
Many, many KIDIALOGs use OK/Cancel and then rename both buttons to
confirm or deny some action.  In those cases we *do* want to store
the deny actions if they check "Do Not Show Again".

Fixes https://gitlab.com/kicad/code/kicad/issues/6979
 2021-01-08 21:32:19 +00:00
Jeff Young 8fffb75347 Allow custom pads with 0-sized anchor pads. 
(Surprisingly we used to in 5.1, so this is a regression.)

Also had to go back to the nag dialog as on a small screen the infobar
comes up behind the dialog.  A lot of the errors have also been turned
into warnings, so the overall effect should still be to reduce nagging.

Fixes https://gitlab.com/kicad/code/kicad/issues/6992
 2021-01-08 20:43:02 +00:00
Jeff Young 3467e643e5 Move pad locking from footprint to pads. 
Fixes https://gitlab.com/kicad/code/kicad/issues/6997
 2021-01-08 20:43:02 +00:00
Seth Hillbrand 6ffb72159a Remove vias if they only connect to single layer 
A via takes up zone space on additional layers, so if we are not
connecting to those layers, then we should remove it.

Fixes https://gitlab.com/kicad/code/kicad/issues/7004
 2021-01-08 09:39:43 -08:00
Seth Hillbrand 1e96374715 Consider tracks and vias together 
Dangling tracks and vias affect each other and need to be considered at
the same time in order to fully remove the dangling segments
 2021-01-08 09:35:58 -08:00
jean-pierre charras 93d203aef7 Fix a I18n issue: a string flagged as translatable cannot be empty. 2021-01-08 18:16:00 +01:00
Seth Hillbrand 9424d66d22 Move footprint when selecting locked pad 
Prompting to unlock is obtrusive and blocks the common action of
dragging from a pad to align footprints.  The less common action of
editing pads in layout can be accomplished after unlocking the pads

Fixes https://gitlab.com/kicad/code/kicad/issues/6997
 2021-01-07 19:46:06 -08:00
Jon Evans 24435df6b0 Don't update 3D view on cursor movement 
Our rendering pipeline is not set up for this kind of speed,
and this is a blocking operation at the moment.

Note that we will get an update at the end of the move
because OnModify does it.

Fixes https://gitlab.com/kicad/code/kicad/-/issues/6819
 2021-01-07 20:43:14 -05:00
Jon Evans 61bddd0928 LAYER_PADS_TH is not a dependent layer 
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6999
 2021-01-07 20:12:31 -05:00
Jon Evans 111fa99f9f PNS: Use last-segment posture optimization always 
Also when auto-posture is enabled, don't flutter
until area threshold has been met.

Fixes https://gitlab.com/kicad/code/kicad/-/issues/6935
 2021-01-07 20:12:31 -05:00
Jeff Young 3fd128a75b Performance enhancements. 2021-01-08 00:46:55 +00:00
Jon Evans 5c22ffe422 Don't try to load a nonexistent layer setting 
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6998
 2021-01-07 19:09:54 -05:00
jean-pierre charras bf332b3189 Fix minor compil warnings 2021-01-07 20:55:24 +01:00
Jeff Young 01fe3b91e9 Implement locking for graphic shapes. 
Fixes https://gitlab.com/kicad/code/kicad/issues/6972
 2021-01-07 17:39:18 +00:00
hoijui 6ca9a42251 Removes 3 other instances of a potential encoding problem 
Signed-off-by: hoijui <hoijui.quaero@gmail.com>
 2021-01-07 17:36:49 +00:00
Jeff Young 8c8516b7b1 Remove formbuild URL from hypertext links. 
Also adds a tooltip.

Fixes https://gitlab.com/kicad/code/kicad/issues/6982
 2021-01-07 15:12:19 +00:00
Jeff Young e41c06304b Don't show a leading ratline to a NPTH. 
Fixes https://gitlab.com/kicad/code/kicad/issues/6960
 2021-01-07 12:25:04 +00:00
Jeff Young f702b64b8d Minor improvements to formatting & SNR. 2021-01-07 12:25:04 +00:00
Marek Roszko 84dd78e01d Fix the install location for vcpkg built python modules 2021-01-07 00:08:11 -05:00
Seth Hillbrand 52f822dedb Remember autotrack width setting 
Fixes https://gitlab.com/kicad/code/kicad/issues/6971
 2021-01-06 20:11:32 -08:00
Jon Evans 0234b7278a PNS: Make DIRECTION_45 North be up everywhere 
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6935
 2021-01-06 21:47:06 -05:00
Jeff Young ad8136541b Improve layout and terminology of Remove Unused Pads. 
Also removes the limitation of removing outside layers for pads.
It's already supported in Pad Properties so it's odd to not support
it here.
 2021-01-07 01:27:12 +00:00
Jeff Young f372c8025b Better sizing for some conditional dialogs. 
These dialogs don't have growable features but do have conditional
features, so the size is better adjusted automatically by the code
then by the user.
 2021-01-07 01:27:12 +00:00
Seth Hillbrand 43e7b1ab6e Set icons for front/back assembly layers 2021-01-06 13:49:00 -08:00
Seth Hillbrand c0f940438a Clarify Flip action 
Fixes https://gitlab.com/kicad/code/kicad/issues/6954
 2021-01-06 13:02:44 -08:00
Jeff Young 2a088e5c7b Add conversion of circles to zones and enable in footprint editor. 
Also rule areas, of course.

Fixes https://gitlab.com/kicad/code/kicad/issues/6966
 2021-01-06 17:21:49 +00:00
Jeff Young 70967bfebd Hierarchical menu parents don't get ...'s. 
Also moves the Convert menu up a level.  Nested hierarchical menus
should be avoided whenever possible.
 2021-01-06 17:21:49 +00:00
Jeff Young 8aeaaf99ef Disable net selector for non-free vias. 
Also moves the checkbox up so this relationship is clearer.

Fixes https://gitlab.com/kicad/code/kicad/issues/6967
 2021-01-06 15:49:12 +00:00
Jeff Young 366c7096b3 More double- and triple-pointer erradication. 2021-01-06 14:37:38 +00:00
Jeff Young 426536c381 Don't show empty-net synthetic net in Net Inspector. 
Also fixes an assert when deleting a net inspector row with no
parent row.

Fixes https://gitlab.com/kicad/code/kicad/issues/6962
 2021-01-06 14:27:02 +00:00
Jon Evans 46c4727783 Make MSVC happy again 2021-01-05 20:56:37 -05:00
Michael Kavanagh 2a24886d47 Icons: remove more duplicates 2021-01-06 00:35:20 +00:00
Michael Kavanagh 6fd718fbd8 Icons: replace old with new 2021-01-06 00:35:20 +00:00
Michael Kavanagh 5d9b2d3fea Icons: new filter icon 
+ remove icons where they don't make sense.
 2021-01-06 00:35:20 +00:00
Michael Kavanagh 54724096ea Icons: consistency between Eeschema and Pcbnew 2021-01-06 00:35:20 +00:00
Seth Hillbrand fd04a176a4 Remove full path from drill report 
Leaves just file name in place.  Full paths are considered a security
risk for some

Fixes https://gitlab.com/kicad/code/kicad/issues/6949
 2021-01-05 16:22:08 -08:00
Seth Hillbrand 71a93c71f7 Prevent footprint editor snapping to footprint 
Inside the footprint editor, we only want snap points from the base
elements

Fixes https://gitlab.com/kicad/code/kicad/issues/6948
 2021-01-05 16:08:30 -08:00
Jon Evans e7b047660c PNS: Correctly assemble lines with reversed arcs 2021-01-05 17:57:21 -05:00
Jon Evans feda03f69b PNS: Fix arc orientation when assembling lines with backwards arcs 2021-01-05 17:57:21 -05:00
Jon Evans 7431d5c985 PNS: First pass at updating meander placers for arcs 
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6464
 2021-01-05 17:57:21 -05:00
Jon Evans 8619086cf2 PNS: re-enable optimization of colinear segs in lines with arcs 2021-01-05 17:57:21 -05:00
Jon Evans 8901e71fc8 PNS: Fix loop removal, make walkaround less broken for arcs 2021-01-05 17:57:21 -05:00
Zoltan Gyarmati 5676117d0b Make small drill marks size configurable via advanced config for both printing and plotting 
Fixes https://gitlab.com/kicad/code/kicad/-/issues/1972
 2021-01-05 22:37:34 +00:00
Jeff Young 81aa91ce2a Run insideCouryard on all matching footprints, not just the first. 
Fixes https://gitlab.com/kicad/code/kicad/issues/6945
 2021-01-05 22:22:25 +00:00
Seth Hillbrand 4710b709d9 Only darken, don't hide vias unless requested 
Fixes https://gitlab.com/kicad/code/kicad/issues/6912
 2021-01-05 14:00:15 -08:00
Jeff Young a9d4d9d7f0 Modify insideArea() to return true for zones only when fully inside. 
Intersections is enough for other objects.
This is also a bit of a DRC performance improvement.

Fixes https://gitlab.com/kicad/code/kicad/issues/6934
 2021-01-05 21:43:04 +00:00
Jeff Young 02cd8c99cd Better error messages when routing can't be started. 
Fixes https://gitlab.com/kicad/code/kicad/issues/6541
 2021-01-05 18:47:58 +00:00
Seth Hillbrand b19ccd819e Quiet compile warning 2021-01-05 09:16:38 -08:00
Jeff Young 88d42724e6 Remove diff-pair-gap handling from single-line-router. 
We can't really support it until we do min/max/opt shoving and
dragging.

Fixes https://gitlab.com/kicad/code/kicad/issues/6932
 2021-01-05 16:54:52 +00:00
Jeff Young d975f2f6aa Commenting and naming for clarity. 2021-01-05 16:54:52 +00:00
Jeff Young a48f0d21f7 More consistency in clearance resolution messages. 2021-01-05 16:54:52 +00:00
Jeff Young f7b20611c1 Enforce hole-to-hole min when placing diffpair vias. 
Fixes https://gitlab.com/kicad/code/kicad/issues/6931
 2021-01-05 00:26:49 +00:00
Jeff Young 93bd2171ab Formatting. 2021-01-05 00:26:49 +00:00
Michael Kavanagh b40e3a39f5 Minor cleanup. 2021-01-04 23:59:36 +00:00
Jeff Young d24b034cbc Cleanup (and a minor performance improvement). 2021-01-04 22:32:29 +00:00
Jeff Glass 597a74af9a Corrects text of orthogonal dimensions 
The 'outisde' position is now 'outside' in all orientations

Fixes https://gitlab.com/kicad/code/kicad/-/issues/5821
 2021-01-04 19:53:39 +00:00
Jeff Young 2ea6bc5529 Formatting. 2021-01-04 19:19:55 +00:00
Jeff Young 648c42f643 Show collisions preventing routing from starting. 
Also introduces a callback to the infobar so that the view can be
cleaned up when the timer expires.

Fixes https://gitlab.com/kicad/code/kicad/issues/6930
 2021-01-04 19:19:55 +00:00
Jeff Young 354d9b4e63 Simplify layer pair indicator icon. 
It now just has top layer / bottom layer from the router's layer
pair.  The current layer is visible in the drop-down just to the
left, and the via stuff was confusing anyway.
 2021-01-04 19:19:55 +00:00
Jon Evans 5c8927678a Don't link a project to a board more than once 
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6929
 2021-01-04 13:23:19 -05:00
Michael Kavanagh 76cfd19621 Icons: fix incorrect icon in footprint browser 2021-01-04 01:44:02 +00:00
Jeff Young c09d3b765a Slight improvement to error text for when drill is same size as pad. 2021-01-04 00:03:21 +00:00
Jeff Young 33aa6edb01 Don't run clearance tests on unflashed NPTH pad layers. 2021-01-04 00:03:21 +00:00
Jeff Young d0b82ea26e Show better descriptions of through-hole pads. 2021-01-04 00:03:21 +00:00
Jeff Young 7378c2c3b3 Implement max hole size DRC checks. 
Fixes https://gitlab.com/kicad/code/kicad/issues/6893
 2021-01-04 00:03:21 +00:00
Jeff Young 71215bcab3 Make sure TH pads get collision layer highlighted. 
Also cleans it up to centralise all the decision-making.

Fixes https://gitlab.com/kicad/code/kicad/issues/6925
 2021-01-03 21:16:09 +00:00
Jeff Young 491fc2c8f2 Save DXF plot params to file and remove some dead code. 
Fixes https://gitlab.com/kicad/code/kicad/issues/6720
 2021-01-03 14:22:25 +00:00
jean-pierre charras a1d7a959f7 more fixes and enhancements in DIALOG_EXPORT_STEP. 2021-01-03 11:38:09 +01:00
jean-pierre charras 5db75805bd Step exporter: better values for min distance between 2 points to merge them. 
- The default value is 0.01 mm (according to comments and similar to the 3D viewer
 settings that uses 0.02 mm)
- The export dialog  has now 3 values 1 micron, 0.01mm (default) and 0.1 mm
The 0.1 micron option is removed: it makes no sense for a mechanical tolerance.
 2021-01-03 11:01:03 +01:00
Jon Evans f01297fedd Convert an annoying message box to an infobar 2021-01-02 22:14:10 -05:00
Michael Kavanagh 154e19b6e7 Icons: use common prefix for small 16x16 2021-01-02 23:16:33 +00:00
Michael Kavanagh 5a3f4f52df Icons: add new icon for Pcbnew 'Special Tools...' 2021-01-02 23:16:33 +00:00
Michael Kavanagh 6d3c1c7716 Icons: remove unused sources/duplicates + rename 2021-01-02 23:16:33 +00:00
Carlo Bramini a06387fafd Fix warning at compile time 2021-01-02 22:42:16 +00:00
Jeff Young f691828c8f Nullptr safety. 
Fixes https://gitlab.com/kicad/code/kicad/issues/6862
 2021-01-02 22:26:12 +00:00
Jon Evans 7e58f1aa9f Fix display of pads in high contrast mode 
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6912
 2021-01-02 14:16:17 -05:00
Jeff Young 8b849b1c49 Fix several bugs in hull push-back with vias. 
1) take hole plating thickness into account
2) build hulls specifically for via so pushing back to the hull doesn't
have to try and figure out how much extra to push back for the via
and/or hole
3) clear MK_HOLE flags when colliding with the pad itself so that we
don't get stuck in HOLE mode
4) move flag setting/clearing to updateNearest() so that it will keep
track of the state of the nearest collision

Fixes https://gitlab.com/kicad/code/kicad/issues/6913
 2021-01-02 19:14:44 +00:00
Jeff Young 13094fdc28 Formatting. 2021-01-02 18:38:17 +00:00
Jeff Young 85e42890c4 Distinction between via and via hole probably not useful. 
Fixes https://gitlab.com/kicad/code/kicad/issues/6913
 2021-01-02 16:41:09 +00:00
Jeff Young 068af7d328 When routing don't give NPTH holes a copper clearance. 
Fixes https://gitlab.com/kicad/code/kicad/issues/6903
 2021-01-02 16:33:51 +00:00
Jeff Young b5e7611696 Don't cross-pollute CONSTRAINTs. 
If you want the HOLE_CLEARANCE, then ask for it.
 2021-01-02 16:33:51 +00:00
Jon Evans eba7cb222c PNS: Fix initial posture guess for pads 2021-01-02 10:32:15 -05:00
Jeff Young 6b6694f55f Fix typo. 
Fixes https://gitlab.com/kicad/code/kicad/issues/6913
 2021-01-02 15:04:30 +00:00
Jeff Young 42c114f6ed Record status of via dragging in Walkaround mode. 
Fixes https://gitlab.com/kicad/code/kicad/issues/3967
 2021-01-02 00:31:02 +00:00
Jeff Young 419d8dcd6f Minor cleanup. 2021-01-01 23:42:44 +00:00
Jeff Young 8a049cf290 Make sure bounding boxes get cached on rule areas. 
Fixes https://gitlab.com/kicad/code/kicad/issues/6898
 2021-01-01 23:17:49 +00:00
Jeff Young 018c17399d SNR. 2021-01-01 23:17:49 +00:00
Jeff Young 8ee72853fb Be more targetted on when we load DRC Rules for better performance. 2021-01-01 23:17:49 +00:00
Seth Hillbrand a69a4be853 Fix build error with icon names 2021-01-01 13:13:33 -08:00
Seth Hillbrand 72c27b2e33 Make expand selection stop at vias 
During the first expansion, we are supposed to stop at vias and branches
(where three track ends connect).  This needs to account for the number
of vias and tracks not just tracks
 2021-01-01 09:31:44 -08:00
Jeff Young fc1b0ec11f Improve feedback when routing in highlight collisions mode. 
In particular, when Allow DRC violations is NOT turned on and we
bump in to an obstacle.
 2021-01-01 17:25:37 +00:00
Seth Hillbrand 8de9cff4e0 Change environmental variables to human-readable 
Versions specific variables that may point to objects that change
through versions, allowing multiple KiCad versions to operate correctly
(even on MSW) on the same machine.
 2021-01-01 16:20:35 +00:00
jean-pierre charras 6a81113c2d Better comments in files related to my previous commit. 2021-01-01 17:09:32 +01:00
jean-pierre charras 93e186f53e SelectFootprintFromLibTree(): fix a issue similar to commit 27d47743. 
Force immediate deletion of the APP_PROGRESS_DIALOG (do not use Destroy() )
because on Windows, APP_PROGRESS_DIALOG has some side effects on the event loop
manager. A side effect is the call of ShowModal() or ShowQuasiModal of a dialog
following the use of a APP_PROGRESS_DIALOG (if not deleted) has a broken behavior
(incorrect modal/quasi modal behavior).
 2021-01-01 15:59:15 +01:00
Seth Hillbrand f8f34982c0 Escape PCB text 
Also keep a fail-safe for unescaping strings that are not previously
escaped

Fixes https://gitlab.com/kicad/code/kicad/issues/6901
 2020-12-31 17:17:27 -08:00
Jeff Young 3ba17e0a16 Formatting. 2021-01-01 01:02:06 +00:00
Jeff Young ecc0e861d3 Implement hole clearance and hole-to-hole clearance in router. 
Fixes https://gitlab.com/kicad/code/kicad/issues/6882
 2021-01-01 00:31:36 +00:00
Jeff Young 5d8e6020d1 Improve clarity. 2021-01-01 00:31:36 +00:00
Jeff Young 0e3c9de684 Formatting. 2021-01-01 00:31:36 +00:00
Jeff Young e060ee2a53 Factor in all clearance types when asking for worst clearance. 2021-01-01 00:31:36 +00:00
Jeff Young 1b93663627 Formatting. 2021-01-01 00:31:36 +00:00
Jon Evans 9a0f685a75 PNS: Consider arcs when searching for lines between joints 2020-12-31 13:05:43 -05:00
Jon Evans 73248ab219 PNS: correct initial segment direction for posture solver 2020-12-31 13:05:43 -05:00
jean-pierre charras 381aabdd2a PCB_TARGET: add missing GetMsgPanelInfo() virtual function. 2020-12-31 15:46:58 +01:00
jean-pierre charras a6a2dae480 Footprint editor: ensure the pad editor is closed before load a new footprint. 
When editing a new footprint from the board editor, if the Footprint editor has the pad editor
open, there is a risk of crash when replacing the footprint in edit.

Fixes #6892
https://gitlab.com/kicad/code/kicad/issues/6892
 2020-12-31 10:53:14 +01:00
Seth Hillbrand 82e728dbf6 Remove drawing of annular rings in high contrast 
High contrast should not show the annular rings from other layers.  Once
the ring is removed, we hide the annular when not focused on a flashed
layer

Fixes https://gitlab.com/kicad/code/kicad/issues/6896
 2020-12-30 17:38:30 -08:00
Jon Evans 60fd7fdbb2 Fix comment 2020-12-30 18:52:56 -05:00
Jon Evans 510db66f0e PNS: Fix rollback for arc traces 
PNS: Update posture solver after rollback
 2020-12-30 18:23:24 -05:00
Jon Evans 6105ac50da ADDED: Default hotkey of CTRL+/ for switch corner rounding 2020-12-30 18:23:24 -05:00
Jon Evans b5b64a55ad PNS: Only run optimization if lastNode is valid 2020-12-30 18:23:24 -05:00
Jon Evans 79502a0d88 PNS: A new approach to arc placement 
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6334
 2020-12-30 18:23:24 -05:00
Allan Nordhøy 8d81abb57a Consistent use of spaces in strings. 2020-12-30 22:57:50 +00:00
Seth Hillbrand 5a3e5781bf Allow polygon drawing on edge cuts and courtyard 
Prevents line splitting behavior needed in v5 when drawing polygons on
courtyards. Also provide property dialog with some smarts to handle
special layers

Fixes https://gitlab.com/kicad/code/kicad/issues/6900
 2020-12-30 14:10:30 -08:00
Roberto Fernandez Bautista b168b74919 CADSTAR Archive Importer: Fix position of multiline text with NO_ALIGNMENT in CADSTAR 2020-12-30 18:53:43 +00:00
Roberto Fernandez Bautista ffee24be63 CADSTAR PCB Archive Importer: Rewrite loadBoardStackup routine 
Uses BOARD_STACKUP::BuildDefaultStackupList instead of trying to build the stackup from scratch
Fixes several asserts / incorrect stackups in some older boards
 2020-12-30 18:53:43 +00:00
Roberto Fernandez Bautista a2cbbb963e CADSTAR PCB Archive Loader: Correctly handle Dimension text 
Do not parse fields in dimension text to allow splitting it into prefix and suffix
 2020-12-30 18:53:43 +00:00
Roberto Fernandez Bautista f74a86b7e1 Add missing dimension objects to BOARD::Move collector 
Fixes import of orthogonal dimensions
 2020-12-30 18:53:43 +00:00
Roberto Fernandez Bautista 45b621a3d1 CADSTAR PCB Archive Importer: Fix Import of Linear Dimensions (Angular dimensions not supported) 2020-12-30 18:53:43 +00:00
Roberto Fernandez Bautista fbac766254 CADSTAR PCB Archive Importer: Refactor layer mapping and fix assert 
An assert was being fired to due to incorrect BOARD_STACKUP_ITEM_TYPE on some boards
 2020-12-30 18:53:43 +00:00
Roberto Fernandez Bautista 0a1045300b CADSTAR PCB Archive Importer: Fix loading of net class settings 2020-12-30 18:53:43 +00:00
Roberto Fernandez Bautista cde433c82e CADSTAR PCB Archive Importer: Transfer Project to allow importing of Text Variables 2020-12-30 18:53:43 +00:00
Roberto Fernandez Bautista 03a23db4f7 CADSTAR PCB Archive Importer: Load PCB Text Variables to KiCad project 2020-12-30 18:53:42 +00:00
Roberto Fernandez Bautista 9ed4780fec CADSTAR Archive Importer: Change architecture to Parse CADSTAR fields and store them in a static map 
Architecture of the parser changed to have a shared PARSER_CONTEXT between all the individual parsers.
Parses CADSTAR fields such as <@DESIGN_TITLE@> or <@SHEET_NUMBER@> and replaces with an equivalent KiCad Text Variable.
 2020-12-30 18:53:42 +00:00
Jon Evans bf9501e1d4 PNS: Fix auto-posture when placing via 2020-12-29 21:14:36 -05:00
Jon Evans 689da3794d PNS: Merge co-linear segments during placement 2020-12-29 21:14:36 -05:00
Jon Evans 4c0aa6db1a PNS: Disable smart pads optimization for vias 
There is not much point with the current algorithm and it
breaks auto-posture.
 2020-12-29 21:14:36 -05:00
PJM 94bf88d820 Pcbnew: Prevent selections jumping when dragged after flip or rotate 
CHANGED: If you flip or rotate an item or selection of items, move
the mouse, press 'M' and start moving the mouse, the selection jumps
to where the mouse is.  This MR fixes that so it doesn't happen.

This bug was reported against the 5.1.x branch but also affects the
5.99 branch.  This MR is for the 5.99 branch.

Fixes https://gitlab.com/kicad/code/kicad/issues/4069
 2020-12-30 01:02:04 +00:00
Jon Evans 0b0af2f545 Fix layer ordering of pad net names 
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6881
 2020-12-29 18:31:44 -05:00
Jon Evans a637f310d0 Store zone display mode in project local settings 
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6886
 2020-12-29 17:19:01 -05:00
Jon Evans 23f81412c3 Ensure connectivity is updated before filling zones 
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6844
(maybe)
 2020-12-29 14:58:45 -05:00
Jon Evans 241823647b DRC: Fix a minor memory leak 2020-12-29 14:58:45 -05:00
Jon Evans bc712a7383 Remove some stray printfs 2020-12-29 14:58:45 -05:00
Jon Evans 76e8c62269 PCB_VIEW: Fix a few ASAN issues 2020-12-29 14:58:45 -05:00
Jeff Young 35a5781f68 Don't look at project layer visibilities for footprint editor. 
Fixes https://gitlab.com/kicad/code/kicad/issues/6873
 2020-12-29 17:03:43 +00:00
Jeff Young 97a99beef5 Fix missing ENUM_TO_WXANY decl. 
Fixes https://gitlab.com/kicad/code/kicad/issues/6879
 2020-12-29 14:37:03 +00:00
Jeff Young efd16dca66 Fix a bunch of issues with group selection and highlighting. 
Fixes https://gitlab.com/kicad/code/kicad/issues/6686
 2020-12-29 12:41:24 +00:00
Jeff Young f7a6dc26e9 Give GROUP_PROPERTIES_DIALOG its own files. 2020-12-29 12:41:24 +00:00
Jon Evans 81d4e06f00 PNS: Consider pad orientation when routing 
PNS: Skip smart pads when posture was manually forced

This allows a more-correct pad breakout to be chosen when
smart pads is off.
 2020-12-29 01:06:46 -05:00
Jon Evans 96d49d1473 PNS: Improved auto-posture when starting from a segment 
The previous auto-posture algorithm worked great for pads
but not so great when starting routing from a segment.

Now we can optimize the posture based on the starting
segment if one exists, to maximize the "obtuseness" of the
posture.
 2020-12-28 23:51:13 -05:00
Jon Evans 3adff647a7 PNS: Preserve nearest vertex when dragging in shove mode 2020-12-28 19:44:39 -05:00
Jon Evans 55394f343d Don't use snapping for a selection interaction 
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6856
 2020-12-28 17:26:39 -05:00
Jon Evans be294dabce PNS: Snap back to last valid point when committing a drag 
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6651
 2020-12-28 16:36:42 -05:00
Jon Evans e5b7e7d2b2 Add missing header needed for gcc builds 2020-12-28 16:02:06 -05:00
Jeff Young 3e2aa8df3a Thread safety for pad effective shape building. 2020-12-28 20:44:46 +00:00
Jeff Young cfb4e34b07 Cleanup. 2020-12-28 20:44:46 +00:00
Jan Mrázek 93466fa165
Fix crash when adding 3D Models via Python 2020-12-28 20:03:54 +01:00
Jon Evans 17cf2466aa Fix overlapping definitions warning 2020-12-27 19:42:04 -05:00
Jon Evans c4bfca251b PcbNew: show file format conversion warning in infobar 
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6200
 2020-12-27 19:17:58 -05:00
Jon Evans 3c87e67753 PNS: Allow committing routes even when cursor moves beyond valid solution 
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6651
 2020-12-27 17:14:38 -05:00
Jeff Young 1fc4523711 Remove pad-size-setting hack from PCB_PAINTER. 
Also improves the pad warning and error messages, and moves a few
remaining nags from the setting infrastructure to the warning
infrastructure.

Fixes https://gitlab.com/kicad/code/kicad/issues/6141
 2020-12-27 21:11:27 +00:00
Jon Evans 2cdf9875b9 PNS: fix off-by-one in dragCorner45 
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6644
 2020-12-27 15:58:36 -05:00
Jon Evans c615b7a49b PNS: make initial direction behavior consistent with fix-all enabled 2020-12-27 15:21:55 -05:00
Jon Evans 132e78d2b8 Fix pcbnew collector prioritization 
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6307
 2020-12-27 13:50:11 -05:00
Thomas Pointhuber 3b25e7344a Fix deprecation warning. PyEval_InitThreads() is not needed for Python >= 3.7 
See: https://docs.python.org/3/c-api/init.html#c.PyEval_InitThreads

With Python 3.7 this function is called by Py_Initialize()
With Python 3.9 this function is deprecated and does nothing
 2020-12-27 19:18:49 +01:00
Peter Montgomery 1c79e3174c Pcbnew: Prevent footprint jumping when starting to drag it 
CHANGED: When dragging a footprint, if the mouse isn't directly over the
footprint anchor when 'D' is pressed, the footprint center will jump to
the mouse position when dragging begins.  This MR uses the current
mouse position instead of the footprint anchor as the inital reference
point when starting to drag.

Fixes https://gitlab.com/kicad/code/kicad/issues/6813
 2020-12-27 17:43:52 +00:00
Jeff Young 1579ce9f9e Separate net updating from Edit Tracks & Vias into a second pass. 
Fixes https://gitlab.com/kicad/code/kicad/issues/6858
 2020-12-27 16:35:38 +00:00
Jeff Young 10e51bfea7 Don't apply "normal" locking strategy to alignment options. 
It's much more useful to use the locked items as targets.

Also fixes some issues with commits getting the wrong items when
pads are promoted to footprints.

Fixes https://gitlab.com/kicad/code/kicad/issues/6859
 2020-12-27 15:02:25 +00:00
Jeff Young e3d95cc2c8 Formatting. 2020-12-27 15:02:25 +00:00
jean-pierre charras a675f1f9c5 pcb_painter, draw pad clearance outlines: use the pad shape for non copper layers. 
For copper layers, if the pad shape is not on the active layer, only the hole
shape clearance is shown (this is correct).
But for non copper layers using the hole shape clearance make no sense
(as long as showing the clearance makes sense for some layers).
 2020-12-27 11:20:48 +01:00
jean-pierre charras 97f3c323c3 Pcbnew: fix missing escaping of texts in DIMENSION when saving the .kicad_pcb file. 
Fixes #6855
https://gitlab.com/kicad/code/kicad/issues/6855
 2020-12-27 10:18:23 +01:00
Jeff Young e1f76ea2ab Gracefully handle dots in the outline path. 
Fixes https://gitlab.com/kicad/code/kicad/issues/6854
 2020-12-27 01:01:25 +00:00
Jeff Young 3aca0e1853 Make sure we nofity of self-intersecting outlines. 2020-12-27 01:01:25 +00:00
Jeff Young 8300e17b69 Fix botched attempt to report hole violations between no-net items. 
Fixes https://gitlab.com/kicad/code/kicad/issues/6851
 2020-12-26 16:24:51 +00:00
Jeff Young ab97035ecb Handle closed shapes being processed after other shapes. 
Fixes https://gitlab.com/kicad/code/kicad/issues/6845
 2020-12-26 12:57:49 +00:00
Jeff Young af2219ba7f Finish implementation of hole clearance checking. 
It appears we never did via hole testing, and pad hole testing didn't
appear to get much testing.
 2020-12-25 22:32:19 +00:00
Jeff Young 0d57f90982 Make sure SCH-related frames use the schematic worksheet color. 
Fixes https://gitlab.com/kicad/code/kicad/issues/6843
 2020-12-25 16:59:41 +00:00
Jeff Young 7a081b7c04 Naming consistency. 2020-12-25 16:59:41 +00:00
Jeff Young 04c8d0e9d8 Comments. 2020-12-25 16:59:41 +00:00
Jon Evans 60503652a1 Kick-start appearance panel to redraw on Mac 
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6827
 2020-12-25 10:44:18 -05:00
Jeff Young 84ce814037 Repair segment ownership logic for rects and curves. 
Fixes https://gitlab.com/kicad/code/kicad/issues/6847
 2020-12-25 13:21:20 +00:00
Jeff Young 9c4d3add15 Fix typo. 
Fixes https://gitlab.com/kicad/code/kicad/issues/6845
 2020-12-25 12:07:26 +00:00