032708860b
Include both text shapes and border shapes in textbox.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11806
2022-07-25 16:10:08 +01:00
e10158ff10
ADDED show pin names on footprint pads when assigning to symbol.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/4576
2022-07-24 23:41:41 +01:00
1bad72f14f
Remove bad static_cast.
...
(m_settings isn't a PCBNEW_SETTINGS in non-PCB_EDIT_FRAMEs)
2022-07-24 23:41:41 +01:00
82167a7c96
Avoid crashes when, for some reason, a dll cannot be loaded.
...
In this case a null pointer was returned by the internal code.
This pointer is now tested against nullptr to avoid the application crashing.
Fixes #12080
https://gitlab.com/kicad/code/kicad/issues/12080
2022-07-24 19:42:50 +02:00
0604d7b813
Fix minor compil and Coverity warnings.
2022-07-24 09:33:43 +02:00
c16d0603c6
Add fix missing in my commit 8eee7667
2022-07-24 09:10:51 +02:00
fa679d3601
Pinned libs can also be found in program settings.
2022-07-23 20:17:04 +01:00
8eee766791
Fix Cvpcb DISPLAY_FOOTPRINTS_FRAME: some display options not working. Commit 5e4a7041 moved 4 settings used in Cvpcb to a PCBNEW_SETTINGS struct. But in Cvpcb, this config struct does not exist. So these 4 settings are now moved to a section (PCB_VIEWERS_SETTINGS_BASE) common to Cvpcb and Pcbnew config.
2022-07-23 18:45:13 +02:00
f0ef6932b8
Fix issues with plotting textbox outlines.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11943
2022-07-23 13:53:03 +01:00
280ff3ccdc
Fix net highlight command enablement.
...
These always need to be enabled so that the current highlight can
be cleared.
Fixes https://gitlab.com/kicad/code/kicad/issues/12058
2022-07-23 12:42:11 +01:00
9dd3bbf2cb
Change highlight net hotkey default.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12051
2022-07-23 12:34:48 +01:00
bf5e649e44
Fix log errors in new solder masking checking code.
2022-07-23 09:26:04 +01:00
f41af10007
Clean up hole shapes for safety (smart pointer) and consistency.
2022-07-22 23:06:07 +01:00
a2c002e1da
Improve solder mask aperture testing.
...
1) For solder mask apertures report both the aperture and both
exposed items.
2) Don't process solder mask apertures in footprints with the
"bridging allowed" flag set.
Fixes https://gitlab.com/kicad/code/kicad/issues/12064
2022-07-22 23:06:07 +01:00
5442d284f4
Improve strings for highlight net commands.
2022-07-22 09:31:11 +01:00
def87c969e
Redo the pinned-libraries storage architecture.
...
1) always use preferences directly
2) allow nicknames from either preferences or project
3) store-after-modify
Fixes https://gitlab.com/kicad/code/kicad/issues/12000
Fixes https://gitlab.com/kicad/code/kicad/issues/11892
2022-07-22 09:31:10 +01:00
b80fd5329d
Clear dimension pointer after committing.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11864
2022-07-22 09:31:09 +01:00
004abcd370
Leave originally selected items selected after cancelled move.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12024
2022-07-22 09:31:08 +01:00
b6b4ae959e
Shuffle around the helper script folders
2022-07-21 19:04:08 -04:00
16e3d40552
ADDED: Display calculated clearance in status bar
...
In addition to showing resolved clearance, we also show the calculated
clearance in the same method as is used for DRC. This will allow users
to better examine their system while working.
Fixes https://gitlab.com/kicad/code/kicad/issues/7934
2022-07-21 15:44:48 -07:00
9b74372f9d
Minor spelling fix
2022-07-21 11:55:44 -07:00
e558893851
router: use actual snap point position for routability checks of a segment instead of the segment endpoint(s).
...
Explanation:
- place a long segment A with something violating the rules close to its endpoint
- try to start routing in the 2/3 of the length of A (on the obstacle side)
- bummer - the router picks the nearest endpoint of A for the collision check (even though we don't care about this collision since we want to route far away from it)
2022-07-21 16:30:28 +02:00
f8b157a1fb
PCB: Bitmaps should respect layer opacity and highlighting options
...
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/12045
2022-07-20 14:59:19 -04:00
012d861aab
Get rid of error-prone reverse logic.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12049
2022-07-20 17:24:12 +01:00
6a9c6e8599
Hook up ID_GRID_SETTINGS for footprint viewers.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12030
2022-07-19 21:24:45 +01:00
763c77eab8
DXF parameters are for DXF (only).
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12021
2022-07-18 17:51:20 +01:00
49bf717c0e
fix minor compil warnings
2022-07-17 20:29:59 +02:00
1ade5a8c72
Fix typo.
...
And clean up the code just a little to make it clearer.
Fixes https://gitlab.com/kicad/code/kicad/issues/12022
2022-07-17 17:04:04 +01:00
b727bfc16d
Performance: avoid sqrt at all costs.
2022-07-16 18:42:32 +01:00
d0547cbde7
Don't allow 0 line-width for unfilled shapes.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12010
2022-07-16 16:26:05 +01:00
2f00b4e170
Delete multiple rows if selected.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12013
2022-07-16 12:07:15 +01:00
aa9fe58abe
Don't duplicate user-defined track widths, via sizes or DP dims...
...
... when appending to board.
Fixes https://gitlab.com/kicad/code/kicad/issues/12014
2022-07-15 20:52:08 +01:00
c8a383a48e
Get via font fill/color correct when highlighted
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11802
2022-07-15 11:40:46 -07:00
595e5cb3f2
Add sort feature to pre-defined list
...
Board setup rows should be sortable when inserting new elements. They
get sorted when saving, this keeps that representation while editing
Fixes https://gitlab.com/kicad/code/kicad/issues/12015
2022-07-15 11:16:15 -07:00
2de10080cd
Add edge and margin clearances to message panel.
2022-07-15 16:14:32 +01:00
50bb7c93a1
Fix bug in commit 64e1720f
2022-07-15 17:03:05 +02:00
64e1720f12
FP_SHAPE in pads: always specify fill mode for shapes that can be filled or not.
...
Fixes #12012
https://gitlab.com/kicad/code/kicad/issues/12012
2022-07-15 16:50:38 +02:00
c98826c8b0
Open newly-pasted footprint on canvas of Footprint Editor.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11398
2022-07-15 14:13:39 +01:00
93fb00d815
Protect the Kiway dereference
...
Also find a few more places where we are reaching into a new frame to
perform actions that need to have dialogs closed.
Running actions should also wait for the next cycle rather than being
immediately executed when we are calling into a new frame. This allow
for the cleanup actions onClose() to happen prior to the next action
starting
Fixes https://gitlab.com/kicad/code/kicad/issues/11891
2022-07-14 11:37:45 -07:00
d44e34d513
Images: Add full properties editor
...
Converts dialog_image_editor to panel_image_editor. Embeds this panel in
a new properties dialog for the schematic and PCB editors that allows
editing position, layer, locked status, etc. like other items.
2022-07-14 11:23:23 +00:00
99f8b21ed1
PCB: Add bitmap layer per board layer
2022-07-14 11:23:23 +00:00
3669cb4673
PCB Editor: Add User Background Images
2022-07-14 11:23:23 +00:00
b5bf1da251
Keep track of blocking windows
...
Allows the calling KiWAY player to send messages to the blocking window
before signaling a separate call
Fixes https://gitlab.com/kicad/code/kicad/issues/11891
Fixes https://gitlab.com/kicad/code/kicad/issues/11772
2022-07-13 19:25:24 -07:00
91e4d5e0ea
Add Apply button to "Edit Text and Graphics"
...
Allows the user to apply multiple sets of changes without closing the
window
Fixes https://gitlab.com/kicad/code/kicad/issues/11904
2022-07-13 16:44:15 -07:00
20a372ff69
ADDED Clearance data in PCB editor status bar
...
When selecting two objects, display the resolved clearance and
(optionally) hole clearance in the status bar
2022-07-13 15:04:32 -07:00
a9a5136c1c
Always allow blind/buried/micro vias
...
Removes a nanny setting that prevented the use of
blind/buried/micro-vias without a checkbox. If the designer does not
want microvias in their board, they simply do not place microvias.
2022-07-12 19:47:31 -07:00
3d1d432c5e
PCB Editor: re-add missing color to dynamic ratsnest
2022-07-12 19:36:51 -04:00
e87ba10a5a
Enforce group selection to abide by L/R behavior
...
When selecting greedy (right to left), selecting any part of the group
will get the whole group. When selecting left to right, we must select
all items in the group to get the grouped items unless we are in the
group itself
Fixes https://gitlab.com/kicad/code/kicad/issues/11902
2022-07-12 11:01:34 -07:00
664bf1382d
PNS: Fix IsLineCorner logic
...
Handle segment width test in the case of locked segs
Fix logic failure where vias on path cause crash
Fixes https://gitlab.com/kicad/code/kicad/-/issues/11990
(cherry picked from commit 2512375988
2022-07-12 02:49:24 +00:00
57acce9e55
Share more code between selection tools.
2022-07-11 19:04:08 -06:00
aaf99eb0cc
Performance optimizations.
2022-07-11 21:25:12 +00:00
3081023b5e
ADDED: Minimum copper connection width DRC check
...
Checks all copper connections in each net/layer for minimum width
setting.
Fixes https://gitlab.com/kicad/code/kicad/issues/9870
2022-07-11 19:26:56 +00:00
6a74ecbffd
Pcbnew: fix minor white space issue in board file.
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/11669
2022-07-11 11:21:45 -04:00
0a623bff9f
Save fp browser list widths and apply known hack to work around wxWidgets bug.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11744
Fixes https://gitlab.com/kicad/code/kicad/issues/11745
2022-07-10 23:07:04 -06:00
43b82aeffc
Fix another case of Edge_Cuts & Margins needing to be treated as all-physical-layers.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11843
2022-07-10 20:32:28 -06:00
19b4844102
Avoid OSX system shortcut.
...
CHANGED toggle net highlight from ctrl-` to opt-`.
Fixes https://gitlab.com/kicad/code/kicad/issues/10160
2022-07-10 20:20:22 -06:00
1eb2a39eca
Fix errant test in board items plotter.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11944
2022-07-10 18:54:36 -06:00
e122dc38bd
Add context menu item for clearing net highlighting.
...
In selection tools, drawing tools, router tool, line_wire_bus tool.
Fixes https://gitlab.com/kicad/code/kicad/issues/11920
2022-07-10 17:15:20 -06:00
eb27a3f8b9
Added pinning support to various EDA_LIST_DIALOGs.
...
Footprint Save As, Symbol Save As, etc.
2022-07-09 20:44:49 -06:00
05219e4d9a
Add pinned library support to Choose Symbol and Choose Footprint.
2022-07-09 20:06:31 -06:00
190fb23e88
Add pinned library support to Footprint and Symbol Viewers.
...
Also includes adding libraray and symbol filters to Symbol Viewer.
2022-07-09 17:41:10 -06:00
b8479bf6f1
Handle severity ignore rules in router.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11609
2022-07-09 11:24:47 -06:00
0cb5abd7f7
Fix highlight on route again
...
Added a clarifying comment that will hopefully keep the required code
block in place
2022-07-08 20:14:46 -07:00
c7746fa000
Fix copy pasta error.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11986
2022-07-08 17:44:36 -06:00
ded611aed5
Patch annoying large checkbox cols in wxWidgets 3.1.x on OSX.
2022-07-08 17:27:05 -06:00
521b231873
Don't zero out width of shapes on Margin, only Edge_Cuts.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11967
2022-07-08 17:27:05 -06:00
654740b90d
Add newly-drawn objects to any entered group.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11912
2022-07-08 17:27:05 -06:00
8a9bf02b7e
Smarten up silk clearance & tented item handling.
...
The inspection tool will report whether or not the item is tented
(indicating in that case that any clearance will only be applied
to any hole).
The DRC test ignores tented items without a hole, and runs the
clearance test against the hole for items with a hole.
Fixes https://gitlab.com/kicad/code/kicad/issues/11954
Fixes https://gitlab.com/kicad/code/kicad/issues/11951
2022-07-08 17:27:05 -06:00
f611f9f5d3
Allow zone connection rules to target footprints.
...
If the pad is set to inherit and a rule targets its parent footprint,
then that rule should fire.
2022-07-08 17:27:05 -06:00
fa2e43f696
Reduce noise in board <-> library footprint tests.
2022-07-08 17:27:04 -06:00
0c47a09517
Ensure rectangles are normalized
...
Normalize on creation and fixup rectangles previously saved with
inverted coordinates
Fixes https://gitlab.com/kicad/code/kicad/issues/11965
2022-07-07 10:40:18 -07:00
7b28804f67
Fix a minor compil and Coverity warning
2022-07-06 13:54:17 +02:00
7f9f37e507
Avoid double-caching FP zones
...
Leads to crashes/invalid data when multi-threading hits both at same
time
2022-07-05 20:07:18 -07:00
f00de04336
FP editor: fix incorrect mirroring of zones in footprint.
...
This is due to a call to Mirror() with incorrect parameter.
Unfortunately, depending on FP items, one Mirror parameter has the opposite
meaning about mirror axis.
Fixes #11952
https://gitlab.com/kicad/code/kicad/issues/11952
2022-07-04 11:14:47 +02:00
3111b7679d
router: bring back the snap-to-hull behaviour in Mark Obstacles mode
2022-07-03 23:59:27 +02:00
d41e47609c
Pcbnew: fix plot issue for non filled polygons in footprints.
...
Fixes #11959
https://gitlab.com/kicad/code/kicad/issues/11959
2022-07-03 11:24:23 +02:00
cde30d3dba
Clarify cross-probing options
...
Previous the cross-probing options were mixed between sending and
receiving cross-probe events. This clarifies so that all of the pcbnew
cross-probe options deal with whether the cross-probe is seen in pcbnew
and all of the eeschema options deal with seeing the event in eeschema.
Also updates the wording in the options panels to be the same where
possible and adds tooltips
Fixes https://gitlab.com/kicad/code/kicad/issues/11454
2022-07-01 16:47:09 -07:00
907d8fc018
Revert "Fix Swatch sizes"
...
This reverts commit 25c3a4681f
2022-07-01 11:37:55 -07:00
25c3a4681f
Fix Swatch sizes
...
The swatches are surrounded by non-scaling icons. We should not scale
the swatches unless we also scale the icons. This patch makes all
elements in the appearance panel equally non-scaling
This relates to https://gitlab.com/kicad/code/kicad/-/issues/11880
2022-07-01 10:56:13 -07:00
2ff2a6ffcd
Kicad2step: fix STEP export from Pcbnew, broken by changes in commit 8456d6c
...
also: DIALOG_EXPORT_STEP: remember tolerance option during a session.
2022-07-01 09:56:15 +02:00
0c796697b4
Avoid documentation in dialogs
...
If the nomenclature is unclear, we should rework the dialog rather than
adding documentation strings to a crowded dialog.
This also prevents new strings from appearing in v6
2022-06-30 10:57:56 -07:00
af6ba1a16e
Fix typos in pcbnew sub-directory
...
Found via `codespell -q 3 -S *.po,./thirdparty,./Documentation/changelogs -L aactual,acount,aline,alocation,alog,anormal,anumber,aother,apoints,aparent,aray,ba,busses,dout,einstance,leaded,modul,ontext,ot,overide,serie,te,,tesselate,tesselator,tht`
2022-06-30 09:39:45 -04:00
f48ed79039
Rely on DRC rules when items might overlap.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/1790
2022-06-29 13:43:44 -06:00
802745398a
Python add param to change UUIDs on fp load
...
By default, we load all footprints with a new UUID set to allow them to
be added to the board as unique objects. But when editing footprints,
we want to maintain the same UUID.
Fixes https://gitlab.com/kicad/code/kicad/issues/11870
2022-06-29 12:10:24 -07:00
f1a054e6af
Correct SWIG call for board design settings
...
Use the backend call rather than rely on the naming of internal
variables
Fixes https://gitlab.com/kicad/code/kicad/issues/11924
(cherry picked from commit 9cebea5f11
2022-06-28 14:03:43 -07:00
7d8fe98d53
Pcbnew, exporter VRML: code refactor and remove unuded code.
...
It should help later, to use EXPORTER_VRML in python scripting helpers.
Mainly, EXPORTER_VRML avoid to expose the actual exporter VRML internal code.
2022-06-28 18:59:50 +02:00
64b89639cf
PCB Editor: Make Ctrl-Click net highlighting configurable
...
Defaults to ctrl-click is exclusive or selection like other
applications. Footprint editor can only be exclusive or.
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/10810
2022-06-28 16:29:14 +00:00
ab9c42d427
Fix a typo which leads to a bogus type-cast.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11886
2022-06-27 23:07:06 -06:00
833dc70bff
Add edge-exclusions to router (for castellated pads).
...
Fixes https://gitlab.com/kicad/code/kicad/issues/1790
2022-06-27 15:16:37 -06:00
4e4b0962db
Create python subdirectory in pcbnew build for the symlink
2022-06-25 01:10:20 +01:00
03c279ffd4
ADDED: Threadpool
...
Thread pools are long-lasting executors that have close to zero overhead
when launching new jobs. This is advantageous over creating new threads
as we can use this for threading smalling jobs and smaller quanta. It
also avoids the heuristics needed to determine the optimal number of
threads to spawn
2022-06-24 22:59:24 +00:00
8418fe12d8
Allow board saves without modifying project files
...
Without the project files, certain settings will not be saved by this
python call. This defaults to false (current behavior) but setting the
`aSkipSettings` to true will revert to v5 behavior
Fixes https://gitlab.com/kicad/code/kicad/issues/11323
2022-06-24 15:28:56 -07:00
35375a98c6
FP editor, dialog leader dimension: fix text frame setting not saved
...
Fixes #11900
https://gitlab.com/kicad/code/kicad/issues/11900
2022-06-24 17:45:51 +02:00
3fcd959757
Gerbview: minor cosmetic enhancement: show if the file is X1 or X2 format.
2022-06-24 15:44:13 +02:00
f303d78723
Fix install of _pcbnew.so to allow DESTDIR to be used with it
...
We need to use the install directive to do an install so that the
install process uses all the variables correctly. So create a temporary
symlink in the build directory that points to nowhere and then install
that.
2022-06-23 23:15:49 +01:00
c3f90d914b
Gen Drill map: Re-add Gerber option but only using X2 format.
...
Only the X2 format allows the TF.FileFunction option, mandatory to
avoid mistakes about this file that is not a standard Gerber file.
2022-06-23 11:56:27 +02:00
44a8f1e6e6
Create the symlink for the python module in the build tree as well
...
The unit tests need the python module to be loadable, so there needs to
also be a symlink to the kiface inside the build directory.
2022-06-23 00:27:35 +01:00
9bb5beb264
Use symlink to pcbnew kiface for python module on Linux
...
Instead of installing an identical shared library into the Python
folder, just use a link to the existing library instead.
Fixes https://gitlab.com/kicad/code/kicad/issues/9974
2022-06-22 23:40:29 +01:00
b51d8c9825
Introduce new CMake variable to store kiface install location
2022-06-22 23:40:25 +01:00
3ddd287004
Revert "Fixup python module install"
...
This reverts commit 6fd60c5561
2022-06-22 14:11:59 -07:00
6fd60c5561
Fixup python module install
...
INSTALL(FILE) does not handle setting linux-specific attributes in the
same way that INSTALL(TARGET) does. This patch is suggested by
StefanBruens
Fixes https://gitlab.com/kicad/code/kicad/issues/9974
2022-06-22 13:29:08 -07:00
a43fcd045f
Hyperlynx arcs are always CW
...
Previous test comparing start/end angles doesn't account for all cases.
This adds a more robust test to ensure all arcs are output in CW fashion
Fixes https://gitlab.com/kicad/code/kicad/issues/10782
2022-06-22 09:59:37 -07:00
32c5a4d1ea
gen drill maps: remove unusable format (HPGL and GERBER) for map files.
...
Especially, on a regular basis, map files in gerber format create problems
for board house.
2022-06-22 11:13:06 +02:00
82b2df67be
Add 2 automatically generated files to the source tree.
...
These files are needed by translators, so it is better to add them to the source
without need to build kicad.
2022-06-22 08:51:04 +02:00
a852286eb5
Cleanup compile warnings
2022-06-21 17:04:56 -07:00
f2382a7bd1
Add Make selected active/inactive actions to the symbol libraries
...
context menu
Fixes #11372
2022-06-21 23:32:02 +00:00
b54bb90975
DIALOG_FOOTPRINT_WIZARD_LIST_BASE: use a monospaced font to show the wizard errors.
...
A proportional font does not allow to correctly show the error message and the
marker showing the exact position of the error in the printed line.
2022-06-21 09:42:21 +02:00
e73dd40f26
APPEARANCE_CONTROLS: fix incorrect behavior of Preset layers widget:
...
In non English languages, the selection of a previous choice was broken
due to the fact fixed (read only) presets have a English name, but the
UI list uses translated names, so the actual selection was not correctly
displayed.
2022-06-21 08:57:16 +02:00
aad85a83da
Improvements to rotation/mirroring of dimensions inside footprints.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11861
2022-06-20 22:25:39 +01:00
23e8bafd9c
Don't run courtyard conflicts in footprint editor.
2022-06-20 22:25:39 +01:00
426c46abb1
pcbnew: pad editor UI fixes
...
When editing a pad with circular hole the Y dimension is hidden
and Diameter is shown instead of Size X when opening the properties
of an existing pad.
Adjusted Pad shape: label to be vertically aligned to the pad shape
combobox.
2022-06-20 19:15:41 +00:00
6679decc8d
Fix syntax issues in footprint wizards
...
Fixes #11867
https://gitlab.com/kicad/code/kicad/issues/11867
2022-06-20 20:31:18 +02:00
048f277b1e
Don't reset Footprint Tests Run if the board didn't change.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11844
2022-06-20 17:25:43 +01:00
d69e3fdb5e
Specify a winding for Hyperlynx arcs.
...
I can't test it, so it's a 50:50 guess. We may need to flip the
test....
2022-06-20 17:03:37 +01:00
298edb09c3
Initialize TEXT_ATTRIBUTES justifications for text & textboxes.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11805
2022-06-20 17:03:37 +01:00
9db907cc70
pcbnew, plot footprint: fix typo that prevent ploting dimensions
...
Fixes #11860
https://gitlab.com/kicad/code/kicad/issues/11860
2022-06-20 17:20:56 +02:00
d19705ac8c
FOOTPRINT::Flip(): add missing handle of dimensions.
2022-06-20 11:37:25 +02:00
c8ce01ce8e
pcb_parser: fix an incorrect CHECK_MSG when parsing a dimension in a footprint.
...
this incorrect CHECK_MSG created a crash.
Fixes #11859
https://gitlab.com/kicad/code/kicad/issues/11859
2022-06-20 10:42:19 +02:00
73836b50fc
Add proper collision test to via placer.
...
Also moves DISALLOW constraint processing outside the loop as it
performs it's own loop over any objects referenced by the rules.
Fixes https://gitlab.com/kicad/code/kicad/issues/11832
2022-06-19 21:57:49 +01:00
801a98a302
Don't clear marker counts when closing DRC dialog.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11844
2022-06-19 20:51:45 +01:00
231ac567b8
Bug fixes for printing vias.
...
Blind/buried and microvias didn't get their layers trimmed properly,
nor did through vias with dropped pads.
Fixes https://gitlab.com/kicad/code/kicad/issues/11851
2022-06-19 11:58:21 +01:00
82ebc247b8
More performance enhancements for DRC.
2022-06-18 19:47:11 +01:00
5da817649b
Fix nullptr bug.
2022-06-18 13:04:06 +01:00
97b0005780
More caching for DRC.
...
Also fixes a bug where some physical clearance tests would be run even
if the clearance was 0 (or if the rule was set to IGNORE).
2022-06-17 23:58:31 +01:00
f20cb0fda8
Activate teardrops: remove advanced config option and add teardrop keywords in files. (the ability to read teardrop keywords was added some time ago)
2022-06-17 19:42:27 +02:00
b912bef2f6
pcbnew: Display Diameter when circular shape selected in pad editor
2022-06-16 20:26:42 +00:00
bd8f0ae81a
Ibis: Fix coverity issues
2022-06-16 20:09:50 +00:00
4043dca613
Push wxString allocation to smaller context
...
Prevents creation of new wxString on stack for each clearance check
2022-06-16 08:26:28 -07:00
359d66bc81
Protect against invalid pads
...
Before dereferencing the front of the sequence, we have to ensure that
the pad exists on any layer. If not, just return the default (probably
F_Cu) for the element
2022-06-16 08:20:47 -07:00
5327b10064
Remove shared wxString instance in DRC
...
Threaded DRC access will write to this string, re-allocating the memory
without any synchronization between threads using the string. Comment
adding this listed performance as a reason for using shared strings.
Measured performance does not seem noticeably different in either case,
even with high-error count boards. If there is a case where the
performance is limiting, we can replace these wxStrings with
std::wstring and utilize fmt
Fixes https://gitlab.com/kicad/code/kicad/issues/9888
2022-06-15 16:46:03 -07:00
d40664d171
Handle double-click in dimension drawing tool.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11815
2022-06-15 18:07:50 +01:00
5e80e2a421
58f553a9ca requires that cache be layer-sensitive.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11814
2022-06-15 00:30:11 +01:00
bf62d6e9ee
Ibis: Coverity issues
2022-06-13 19:31:57 +00:00
9fd5ee5a2f
paper min size set to 1 inch (previously 0.1 inch, very small indeed)
...
Avoid using magic numbers in file pcb_parser.cpp.
Fixes #11807
https://gitlab.com/kicad/code/kicad/issues/11807
2022-06-13 17:51:29 +02:00
52bc2511cd
Add a radioButton mode to IMAGE_BUTTON.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11797
2022-06-12 20:09:46 +01:00
87f10ea206
Split off the netlist export content helper but it's advancedcfg
2022-06-11 23:09:47 -04:00
cb44d97ed4
Update pcbnew to the new filedlg customize
2022-06-11 22:10:49 -04:00
e5ece4e460
ibis_parser: fixes to build on MSVC
...
Use stringstream instead of C arrays for formatting std::string
std::isnan(int) is invalid
Also fix a few report severities that seemed inconsistent
2022-06-11 18:09:17 -04:00
9b70308f5c
Nullptr defensive code.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11690
2022-06-11 22:32:12 +01:00
4f3cfdc92e
Clang says nan and isnan aren't in std namespace....
2022-06-11 22:14:14 +01:00
f22cf1cc3a
Fill in missing bits of LAYER variable for printing/plotting.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11788
2022-06-10 22:38:01 +01:00
20f4e62176
Rename signalIntegrity to ibis
...
We do not use camelCase in KiCad
2022-06-10 13:35:48 -07:00
f5fe1d5462
router: another attempt at improving 'kink' robustness of the hull generator
2022-06-09 20:51:21 +02:00
0d35d69f70
ADDED: Read IBIS files
2022-06-09 18:30:51 +00:00
ac0f95683f
Sort PCAD layers
...
Better fix for 11750. Instead of figeting with layer values, we sort
our map based on the layer numbers in the PCAD file. F_Cu is always
layer 1 and B_Cu is always layer 2.
Fixes https://gitlab.com/kicad/code/kicad/issues/11750
2022-06-09 11:10:34 -07:00
e857622dd4
Handle B_Cu ordering
...
Stopgap until we introduce multi-layer mapping widget
Fixes https://gitlab.com/kicad/code/kicad/issues/11750
(cherry picked from commit 32aabaf010
2022-06-08 17:19:37 -07:00
124bdb6673
Check for older tags in pcad import
...
The pourOutline/planeOutline do not include support for fillets
Fixes https://gitlab.com/kicad/code/kicad/issues/11749
(cherry picked from commit 72b7f9fe10
2022-06-08 16:27:17 -07:00
f2c26ae528
Formatting.
2022-06-08 23:53:18 +01:00
56df462474
router: fix SegmentHull() corner case when it 'chamfers' more than the clearance permits (corner case for 0-length segments, which we use
...
for representing holes)
2022-06-09 00:33:08 +02:00
990281a897
router: use either copper or hole clearance, whichever is larger, when checking track -> hole collisions
2022-06-09 00:31:47 +02:00
4192c0a709
router: move IsFlashedOnLayer to the IFACE_BASE class so that it can be used in the debugger tool
2022-06-09 00:30:57 +02:00
bcfe12ce47
router: improvements in robustness of SegmentHull()
...
- ensure the 'chamfer' radius and clearance is rounded before computing the actual hull vertices
- for small, non-45 degree line segments (present in many boards), generate a slightly larger but still axis-aligned 45 degree hull instead of following exactly the segment direction
2022-06-08 14:28:31 +02:00
e90ab055b9
router: remove unused LINE::Is45Degree()
2022-06-08 14:28:31 +02:00
dc6c27b686
Don't wipe out visibility state when changing layer count
...
(cherry picked from commit 7053981835
2022-06-08 03:01:02 +00:00
30fb298ed3
PNS: Re-enable hole clearance for non-flashed pads/vias
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/11098
2022-06-07 19:49:38 -04:00
23596812b6
PNS: Implement HoleHull for VIA
2022-06-07 19:49:38 -04:00
bf71cada4e
ADDED: User viewports for 3D viewer.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/5724
2022-06-06 22:24:02 +01:00
244042ce51
Keep footprint selection in Symbol Chooser history list.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/1841
2022-06-06 22:24:02 +01:00
9f38fa43cd
Fix some minor compil and Coverity warnings.
2022-06-05 11:44:49 +02:00
d14fd5a9da
Fix logic error with silk overlap test.
2022-06-04 19:34:24 +01:00
3747369aaa
PNS: Remove offsets from hull generation
...
This is likely an old workaround to numerical precision issues
in the DRC system that no longer exist. Removing this is necessary
for "exact" hull generation to produce walkaround results that
look nice (paths falling exactly on the grid lines)
Fixes https://gitlab.com/kicad/code/kicad/-/issues/10710
(cherry picked from commit 5d4e2aa595
2022-06-04 00:04:03 -04:00
9a2950cca1
PNS: Use exact hulls for walkaround path generation
...
When we generate hulls, by default we subtract the clearance epsilon
to prevent false collisions in the router that wouldn't be flagged
by DRC. However, we need to use the actual hull with no epsilon
when generating hulls for pathfinding in the walkaround system.
Without this change, it is possible for the walkaround to generate
a valid-seeming path that results in a DRC violation, for example
when dragging a drag against a board edge.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/10536
Fixes https://gitlab.com/kicad/code/kicad/-/issues/11365
Fixes https://gitlab.com/kicad/code/kicad/-/issues/10710
(cherry picked from commit 2a91ba35c1
2022-06-04 00:04:03 -04:00
8b75a32cfa
We only want "actual" shapes, not anything derived from SHAPE.
...
Also fixes a bug where GetParentFootprint would get confused by
groups.
Fixes https://gitlab.com/kicad/code/kicad/issues/11741
2022-06-04 00:24:27 +01:00
d2a9cbe6e8
Use effective width for DRC.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11740
2022-06-03 23:27:10 +01:00
c8b93c39b6
router: remove some old cruft from the WALKAROUND class
2022-06-03 23:28:41 +02:00
0bd7f603a3
router: consider mouse drag event a valid route start/end event
...
L-clicks during routing operation while the mouse is moving (even slightly) were ignored, which was annoying to some users (myself included). Now the router
always fixes the track upon mouse click.
2022-06-03 23:28:41 +02:00
eaee610fd9
router: save project settings together with the debug log
2022-06-03 23:28:41 +02:00
f73acbb206
router: derive VIA class from LINKED_ITEM interface
2022-06-03 23:28:41 +02:00
cab08f859a
router: cluster extraction should only consider objects that are touching (instead of checking clearance)
2022-06-03 23:28:41 +02:00
297c60923e
router: return routing status from ROUTER::Move()
2022-06-03 23:28:41 +02:00
54f4f765b9
router: NODE|ITEM::QueryColliding() now can override clearance
...
Needed for clustering algorithm (to be committed later... ;-)
2022-06-03 23:28:41 +02:00
aca9cce5d5
router: more verbose debug messages for the debugger tool
2022-06-03 23:28:41 +02:00
2a0accd184
router: shove algorithm now considers cases where a small via sits 'inside' a fanout of wide (width > via diameter) segments.
...
The shove algorithm can't move the loose track ends. It always needs a via. In case of wide segments stitched with
a small via, the collision search finds only colliding segments and does not consider the via. This leads to frequent shove falilures
or 'choppy' behaviour when the head line only slightly overlaps with an end of a thick trace. This patch attempts at improving this behaviour
by considering the 'tiny via in wide segment' case explicitly.
2022-06-03 23:28:41 +02:00
08647bf035
router: temporarily disable via hole clearance check in the shove algorithm.
...
- needs refinements and additional checks for corner cases.
- disabled also to facilitate debugging of other shove bugs
2022-06-03 23:28:40 +02:00
8cb65a8a13
router: default values for LOGGER::Log()
2022-06-03 23:28:40 +02:00
752ba2ed76
router: log via toggle events
2022-06-03 23:28:40 +02:00
a4ad47cd08
router: use SHAPEs and PNS::ITEMs only in the ROUTER_PREVIEW_ITEM
2022-06-03 23:28:40 +02:00
b08280d00c
router: enable Hole Clearance rule only in Mark Obstacles mode
...
(it will be brought back to Walk/Shove modes as soon as all the underlying issues are fixed)
2022-06-03 23:28:40 +02:00
d31bd4ea3e
Use default text properties for textboxes.
...
Also make sure text is mirrored when placed on back of board.
Fixes https://gitlab.com/kicad/code/kicad/issues/11739
2022-06-03 18:48:09 +01:00
13bece06cf
Fix swig wrapper for footprint 3d models
2022-06-03 17:35:40 +00:00
857990a883
Hierarchy: turn into a left side pane
...
Drop auto-closing option as well.
2022-06-02 21:56:17 +00:00
bd51b33f65
Clear point editor before recombining pad.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11731
2022-06-02 15:55:35 +01:00
de12c63de6
Repair point editing of rotated text boxes.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11432
2022-06-02 10:42:57 +01:00
f8829de5ea
Formatting.
2022-06-02 10:42:57 +01:00
40593930d0
PNS: Fix off-by-one in dragCornerInternal
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/10919
(cherry picked from commit 8d8f96b094
2022-06-01 21:13:05 +00:00
dee22a31d9
Expose footprint ID, description and keywords to property system.
2022-06-01 12:47:37 +01:00
38bc653ce9
Add arc support to HyperLynx export.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10782
2022-06-01 12:47:37 +01:00
6fd14ac945
[PNS] Fix invalid assumption in IsLineCorner
...
(cherry picked from commit a4aa447b95
2022-05-31 20:24:54 -04:00
9470bd15a1
PNS: Fix skew calculation with pad-to-die specified
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/11710
(cherry picked from commit 53dbd3bb02
2022-05-31 20:24:54 -04:00
6c0856c384
Fix PCAD silk layer for solder-side fp
...
The layer should be flipped based on the footprint mirror value rather
than the text mirror value (which is independent)
Fixes https://gitlab.com/kicad/code/kicad/issues/11652
2022-05-31 13:03:32 -07:00
155620cc9a
Move H/V/45 mode from zone properties to toolbar.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8587
2022-05-29 21:30:15 +01:00
1fb7532859
Prepare for a more uniform implementation of H/V/45 mode.
2022-05-29 21:30:14 +01:00
b056bbd9b9
Initialize enabled state of dimension text orientation combobox.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11674
2022-05-28 19:42:06 +01:00
80124d2463
Write out partial pad-stacks for blind/buried/microvias.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11692
2022-05-28 00:19:13 +01:00
2a525cf986
Coding standards.
2022-05-28 00:09:47 +01:00
35b79c2ec9
Make PCAD import case-insensitive
...
According to the PCAD specification, all tags are case insensitive.
Most exporters honor the defaults but there is always an outlier or two
Fixes https://gitlab.com/kicad/code/kicad/issues/11652
2022-05-27 10:09:40 -07:00
21a7e050ab
REMOVED: PCB Editor Layer Alignment Target
...
No longer used by modern PCB processes.
Only the code to add the target to the board has been removed. Parsing
code for existing designs with targets is left in place.
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/10006
2022-05-26 08:47:02 -04:00
ae1ece7a78
Fix duplicate spaces before units.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11675
2022-05-26 10:54:08 +01:00
4afca58ce7
Eagle octagonal pads are regular (~29% chamfered).
...
Also cleans up setting of KeepTopBottom (which is ignored unless
we're doing optional flahing -- which we're not for Eagle imports).
Fixes https://gitlab.com/kicad/code/kicad/issues/11664
2022-05-23 10:43:34 +01:00
24ddf1ad20
Don't use zone connections to control optional via flashing.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11299
2022-05-23 10:26:52 +01:00
3f502b313d
Don't return false when a particular item doesn't connect.
...
We still have to search all the other items, as they might connect.
2022-05-23 10:26:18 +01:00
a33e5c53be
Replace missing setting.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11453
2022-05-20 22:41:48 +01:00
f7fcc310f8
Select next/prev copper layer whether we start on copper or not.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11600
2022-05-20 15:59:29 +01:00
a09bd4ae12
Fix a bug in commit 57e59a49
2022-05-20 15:08:50 +02:00
fa11e1c097
Take text height into account as well as thickness for knockout margin.
...
Also centralizes calculation so all clients will get the same answer.
Fixes https://gitlab.com/kicad/code/kicad/issues/11636
2022-05-20 12:29:01 +01:00
e54ba87895
fix FootprintWizardBase.py compatibility with recent code.
2022-05-20 12:58:07 +02:00
57e59a4959
Pcbnew, on line DRC when moving footprints: add visible collisions between courtyards
2022-05-20 12:58:05 +02:00
deeb7d4d6d
Make use of board stackup data when exporting VRML.
...
Specifically layer colors and board thickness.
Fixes https://gitlab.com/kicad/code/kicad/issues/11627
2022-05-19 23:58:33 +01:00
294b8e9051
Treat a textbox as filled when knocking out (whether it is or not).
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11628
2022-05-18 17:14:57 +01:00
cc86d3da2a
Give up trying to find a one-size-fits-all boudningBox for text.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11636
2022-05-18 17:14:57 +01:00
23fb4c7433
Uniformly use a single facility for location-less prime events.
...
Also implements a uniform mechanism for avoiding auto-scroll after
a prime event or dialog which results in a mouse position at the
edge of the canvas.
Fixes https://gitlab.com/kicad/code/kicad/issues/11057
2022-05-16 23:43:00 +01:00
b00bf2bc6b
Make sure that we have a visible layer
...
Before setting the active layer to our visible sequence, make sure that
the sequence is not empty (leads to invalid layer id->crash)
Fixes https://gitlab.com/kicad/code/kicad/issues/11629
(cherry picked from commit 0d93be0af2
2022-05-16 15:26:05 -07:00
4b668269b7
Don't try and use zone fill before it's been calculated.
2022-05-16 15:20:01 +01:00
f2fc78f380
Don't copy modifiers to prime events.
...
The modifiers go with the hotkey, not with the action.
Fixes https://gitlab.com/kicad/code/kicad/issues/11618
2022-05-16 13:51:40 +01:00
1f088984ce
gerber_placefile_writer: fix angle rotation for flipped footprints.
...
According to latest Gerber documents (rev 2022.02), the previous angle was
missing a +180 rotation
Fixes #11621
https://gitlab.com/kicad/code/kicad/issues/11621
2022-05-16 10:24:13 +02:00
97a8bfc27d
Pcbnew DIALOG_PLOT: fix incorrect association of LAYER_ID in Plot on All Layers list
...
The order of items in wxRearrangeList and the order of LAYER_ID values was incorrect,
at least on W10/msys2
The order of items in wxRearrangeList is no longer used to avoid issues.
2022-05-15 10:52:08 +02:00
88c7322a0d
EDA_TEXT Get/SetTextSize should use VECTOR2I
2022-05-14 08:16:15 -04:00
5c7a79e287
(WIP) Teardrop: use a specific attribute in .kicad_pcb file to identify teardrops
...
the new attribute is:
"(attr (teardrop type padvia)))" or "(attr (teardrop (type track_end)))"
However (Work in Progress) writing this attribute in file is temporarily disabled.
2022-05-14 09:50:00 +02:00
37838dffb9
Make sure physical_clearance rules are run against courtyard layers.
2022-05-10 23:02:53 +01:00
ad066ef09a
Fix cross-probing in complex hierarchies, remove unused code.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11493
2022-05-09 23:22:03 +03:00
b7a77a9498
Schematic: Add CSV export to Symbol Fields Table
2022-05-09 12:02:12 -04:00
8f937b17a2
Remove wxWidgets 3.0.x hack.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11540
2022-05-07 23:24:55 +01:00
ecf6773f74
Remove dead code.
2022-05-07 21:10:04 +01:00
492259a1d4
Outline font bug fixes for PCBNew dimensions.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11583
2022-05-06 18:14:25 +01:00
30ecca464d
Rename mechanical_clearance -> physical_clearance.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11554
2022-05-06 15:54:46 +01:00
dfdedfa605
Fix some issue with NPTH pads with holes same size as pad.
2022-05-06 00:06:00 +01:00
f590dcf513
Fix a couple of typos.
2022-05-06 00:06:00 +01:00
371091a09b
Make zone filler respect mechanical clearances.
2022-05-06 00:06:00 +01:00
5d0d2201f3
Improve clearance report messages.
...
Removes some duplicated terms; puts in some more headers to make
visual parsing easier, and makes non-connected-pads report the correct
data.
Also fixes a bug where zone-connection overrides of none weren't getting
handled correctly.
Fixes https://gitlab.com/kicad/code/kicad/issues/11544
2022-05-03 16:30:04 +01:00
bf2566a44f
Post-process board min clearance rather than building it in to netclasses.
...
The later makes the diagnostic messages harder to decipher.
2022-05-03 13:39:14 +01:00
6b557d8631
Remove special-case processing of ${REFERENCE} and ${VALUE}.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11476
2022-04-30 23:02:04 +01:00
4f63611ee5
SetWidth as well as SetMinWidth for MSW.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11467
2022-04-30 14:09:30 +01:00
d72b9861f7
Translate net inspector column names on the fly.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11467
2022-04-30 00:22:27 +01:00
5f10c15a87
Fix zone merge intersection algorithm.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11492
2022-04-29 22:17:53 +01:00
37aa42d1e3
Don't allow Edge_Cuts or Margin in footprint private layers.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11431
2022-04-27 17:14:33 +01:00
0177613ad3
footprint wizard touch_slider_wizard.py: fix compatibility with current code.
2022-04-27 10:03:38 +02:00
8a97a46e6b
Release file before re-loading it for Revert.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11481
2022-04-26 22:28:35 +01:00
e7f5deedb8
All via pad layers need checking for copper.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11429
2022-04-26 20:54:31 +01:00
47e002a33d
Add font to status bar for text objects.
2022-04-26 18:52:53 +01:00
e6f11c5c39
Reset outline font if bold or italic changed.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11462
2022-04-26 12:52:29 +01:00
f5d612eaed
Switch <insert> replacement on OSX to <f1>.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11413
2022-04-25 10:01:33 +01:00
d192d3c31d
Better violation title for disabled layers check.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11451
2022-04-25 09:39:49 +01:00
3a47d50df4
Fix capitalization error.
2022-04-24 23:51:54 +01:00
3bdae40881
Remove extra layer of parens.
2022-04-24 23:44:02 +01:00
90bfe2d94b
Remove Save Copy As from fp editor, and rename to Save a Copy elsewhere.
...
It's still used by Eeschema and PCBNew when not in stand-alone mode.
Fixes https://gitlab.com/kicad/code/kicad/issues/9185
2022-04-24 19:46:57 +01:00
3304ad75ca
Add on-the-fly i18n update for m_inactiveLayersLabel.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11435
2022-04-24 19:46:57 +01:00
b04f1b2d93
Change pad-type-matches-hole-presence from warning to error.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11452
2022-04-24 14:14:35 +01:00
4cd48cd5c9
Fix some test issues.
2022-04-23 22:15:39 +01:00
f0dab2e07b
Fix some layer handling issues.
2022-04-23 21:29:46 +01:00
dd561f1e4d
Improve Cleanup Tracks and Vias messages.
2022-04-23 21:04:43 +01:00
e6684bf7c7
Add footprint checks to board-level DRC.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11437
2022-04-23 11:34:18 +01:00
4525b1f085
More consistency in DRC error messages.
2022-04-23 09:39:34 +01:00
c6f83b6dec
ADDED Duplicate Footprint, Rename Symbol and Rename Footprint.
2022-04-22 22:06:51 +01:00
b42365190e
Schematic/PCB: deleting fields sets them to invisible
2022-04-21 16:20:23 +00:00
1e80f3a65a
pcad importer: fix a truncation when converting mils to IU. The value in mils is a double, but the function to convert in IU uses int. Fixes #11380 https://gitlab.com/kicad/code/kicad/issues/11380
2022-04-21 10:01:59 +02:00
4afe4c0aa0
Fp editor: Add automatic zoom when loading a fp from library.
...
When loading from a board, the automatic zoom was already in play.
2022-04-21 09:00:04 +02:00
7cb7a68b0e
Make sure Type regex doesn't match before Pad_Type or Pin_Type.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11423
2022-04-20 17:32:07 +01:00
df3e02d9b9
Fix initialisation of default line width settings
2022-04-20 15:57:55 +00:00
4ab2c93070
Update Selection Filter title bar with language changes.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11421
2022-04-19 21:12:13 +01:00
08f15fe587
ADDED New Library functionality to Footprint/Symbol Save As.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/2343
2022-04-19 19:55:30 +01:00
c619a63c06
Fix backwards layer order and minor layout issue.
2022-04-19 19:55:30 +01:00
c38ec9344f
DIALOG_NET_INSPECTOR_BASE: fix a truncation text in a wxComboBox.
...
Probably Windows only: the size was fixed, and can create issues in non English languages
2022-04-19 09:43:24 +02:00
c3bed8f6ee
Resolve textvars before opening file browser.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6436
2022-04-18 22:45:02 +01:00
ab131859f6
Bring footprint textvars in line with symbol textvars.
...
ADDED ${FOOTPRINT_LIBRARY} and ${FOOTPRINT_NAME} resolution.
2022-04-18 22:45:02 +01:00
26370583fa
French translation update and fix a typo.
2022-04-18 11:25:51 +02:00
0211d07060
Footprint viewers: fix regression: re-add automatic zoom option when loading a new footprint
...
Fixes #11402
https://gitlab.com/kicad/code/kicad/issues/11402
2022-04-18 11:15:14 +02:00
71c2cb3180
ADDED revert for pcbnew and eeschema.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6802
2022-04-17 20:02:58 +01:00
9b087a3c25
Add automatic precision choices for dimensions.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6690
2022-04-17 20:02:58 +01:00
e09147db30
Cross-probing for ERC dialog.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11411
2022-04-17 00:33:56 +01:00
9ff1ae5bdc
Better inspection reporting for netclasses, custom rules and DRC.
2022-04-17 00:33:56 +01:00
2f2e956921
Sync via/pad flashing for null boards
...
Pads return true by default and so should vias
(cherry picked from commit bfa1661edf
2022-04-15 15:15:07 -07:00
7f3a75bccd
Add a bunch more inspections for rule resolution.
2022-04-15 22:10:13 +01:00
be7e9d300e
Handle updated document description format
...
parentheses are rarely if ever used independently, so trim the unmatched
ones regardless of whether we find the starting parenthesis in the
description
Fixes https://gitlab.com/kicad/code/kicad/issues/11403
2022-04-15 11:17:01 -07:00
18ac4ed842
Fix crash when selecting DRC marker (as opposed to one of its children).
2022-04-15 13:57:19 +01:00
e9da8c3a00
Ensure net_code is not used by non copper zones when saving the board file.
...
For some obscure reason, non copper zones inside footprints can have non 0 netcode.
Fixes #11395
https://gitlab.com/kicad/code/kicad/issues/11395
2022-04-15 13:19:35 +02:00
dbee441328
We've probably smoked out enough of the GetLayer() issues.
...
... and GetProperty() can query GetLayer() in user scripts.
2022-04-14 17:09:27 +01:00
c78a47c3fb
Remove extra test.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10364
Fixes https://gitlab.com/kicad/code/kicad/issues/10364
2022-04-14 17:09:27 +01:00
378a2de37c
Formatting.
2022-04-14 17:09:27 +01:00
604a148f40
Don't apply electrical clearance to shapes on Edge.Cuts.
...
Also don't apply them to NPTH holes.
2022-04-13 23:38:45 +01:00
a33e23e25a
Import radial dimensions from Eagle.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10763
2022-04-12 15:47:39 +01:00
739f4d0a1e
Improvements to Eagle dimension importing.
...
1) Import leaders
2) Drop radius and angle dimensions
3) Import dimension text sizes
4) Correctly interpret which side dimension offset is on
5) Correclty handle offsets for non-cardinal dimensions
Fixes https://gitlab.com/kicad/code/kicad/issues/10763
2022-04-12 15:47:39 +01:00
74c3ad0b3a
Shadow on locked fp: do not show if LAYER_MOD_FR or LAYER_MOD_BK is not shown
2022-04-12 11:17:04 +02:00
819276bd98
DP tolerance needs to be 1IU on each axis
...
ApproximatelyParallel will only check for parallel within 1 IU, so a 1x1
SEG will always be parallel and the projection is invalid
(cherry picked from commit d0796399a2
2022-04-11 16:58:10 -07:00
f88e0481c8
Change the behavior of ACTION_MENU::Add to require clones if required outside the function
...
This reverts commit 2a5769607f
2022-04-11 19:03:01 -04:00
830f1891c2
Don't forget Pos0 when updating position.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11373
2022-04-11 20:01:32 +01:00
2a5769607f
Revert "Change the behavior of ACTION_MENU::Add to require clones if required outside the function"
...
This reverts commit 403992a6f4
2022-04-11 11:39:03 -07:00
f0f10a43a2
Ensure "Clear Recent Files" menuitem titles are updated after language change.
...
(missing fixes in commit ac8e2d076
2022-04-11 18:11:17 +02:00
a49bb792bd
Insert chevrons when placing vias near tracks.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10898
2022-04-11 16:26:36 +01:00
ac8e2d0768
Ensure "Open Recent" and "Clear files" menu titles are updated after language change.
2022-04-11 11:09:05 +02:00
403992a6f4
Change the behavior of ACTION_MENU::Add to require clones if required outside the function
...
Fix https://gitlab.com/kicad/code/kicad/-/issues/10994
2022-04-10 22:38:13 -04:00
5bb2cdf73d
Revert "Stop leaking submenu items"
...
This reverts commit 34c70a51ea
2022-04-10 22:33:43 -04:00
34c70a51ea
Stop leaking submenu items
...
Our menu bar code is interestingly complex. But we were throwing away newly made menu items to the void in the cases of constructed on the fly submenus
2022-04-10 22:04:48 -04:00
29eb5931c2
Be more careful with forced cursor positions.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9977
2022-04-10 23:14:57 +01:00
32a2490677
Prefer -90 to 270 for text rotation in dialog boxes.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9868
2022-04-10 22:43:44 +01:00
1dae5eb7c4
A better blob vs web detector.
...
Since we're in a deflated state, a long web *could* still have a very
small area. So check max extents instead.
2022-04-10 19:48:45 +01:00
1a2e0d8226
Apply the min-width-by-min-width test to islands after pruning.
...
We're looking for minimum *web* width. A blob does not a web make.
Fixes https://gitlab.com/kicad/code/kicad/issues/6907
2022-04-10 18:21:31 +01:00
2663ad5340
Implement Eagle text variables.
...
Also fixes two bugs:
1) subsequent text items that are marked >NAME or >VALUE will now get
imported as text items with ${REFERENCE} or ${VALUE} (instead of overwriting
the previous text item)
2) we no longer (accidentally) capitalize all text items.
Fixes https://gitlab.com/kicad/code/kicad/issues/11321
2022-04-10 17:29:47 +01:00
a23399a1af
Formatting.
2022-04-10 17:29:47 +01:00
82820d4b1c
Cleanup.
2022-04-09 20:39:35 +01:00
18fb2ddff6
Coverity fixes.
2022-04-09 20:12:29 +01:00
8fc652270e
Cleanup.
2022-04-09 20:12:29 +01:00
0015574a60
${SHEETNAME} represents the sheet name + introduce ${SHEETPATH}
...
CHANGED: The text variable ${SHEETNAME} now always represents the name of the
sheet when used anywhere in the schematic editor, including the title block
ADDED: A new text variable ${SHEETPATH} which is replaced with the path to the
current sheet - e.g. "/Sheet 1/Sheet 2".
To ensure backward compatibility, the default drawing sheet now uses
${SHEETPATH}. Custom drawing sheets will need to be manually edited.
2022-04-09 15:45:58 +01:00
5e52539939
eagle importer: fix incorrect conversion UTF8/wxString.
...
When importing a eagle board file using wxXmlDocument, the strings in eagle BOARD
(UTF8 encoded) are correctly converted to wxString (using unicode wide chars)
So trying to reconvert these strings using FROM_UTF8( <wxString>.c_str() )
is incorrect and can break initial string if non ASCII7 chars are found
2022-04-09 15:33:01 +02:00
1d5be1adeb
Cairo GAL: fix incorrect size and thickness of text drawn by GAL::BitmapText()
2022-04-08 18:40:26 +02:00
722b2588f4
Better error reporting for DP uncoupled length.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10087
2022-04-08 11:40:53 +01:00
c17b90c8dc
Run pinning on sides as well as corners.
...
Also fixes a bug in LIB_SHAPE's Normalize() which wasn't handling the
upside-down coordinate system.
Fixes https://gitlab.com/kicad/code/kicad/issues/11339
2022-04-07 11:51:58 +01:00
9fcc641808
Don't set the dirty bit when running DRC
...
Dirty bit is set in the zone filler separately, there is no action in
the DRC that needs to be saved
Fixes https://gitlab.com/kicad/code/kicad/issues/11344
(cherry picked from commit 821fe6ea42
2022-04-06 17:05:19 -07:00
b66df1e4f3
Remove dead code
2022-04-05 16:26:08 -07:00
0bd3341f0f
Allow textboxes to have no text. (They still have a defined box.)
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11286
2022-04-05 16:29:21 +01:00
c591e19e9f
Smarten textbox conversion back to cardinal rectangle.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11302
2022-04-05 15:12:56 +01:00
68ca385e07
On-the-fly translations for pin electrical types.
...
Also add on-the-fly translation for editor title bars.
Fixes https://gitlab.com/kicad/code/kicad/issues/11324
2022-04-05 13:57:28 +01:00
a118249093
NPTHs obey HOLE_CLEARANCE, not CLEARANCE.
...
Also, plating thickness appears on both walls, so diameter is drill
plus 2X plating thickness.
2022-04-04 20:43:08 +01:00
f272056f20
Fix assert.
2022-04-04 20:43:08 +01:00
921181b20b
Cleanup.
2022-04-04 20:43:08 +01:00
1926af0c34
UNDEFINED_LAYER is always flashed
...
This is already true for vias and should be true for pads as well
Fixes https://gitlab.com/kicad/code/kicad/issues/11335
(cherry picked from commit 7d96d5940d
2022-04-04 12:26:50 -07:00
7f7910d922
Dirty text caches in pcb point editor.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11319
2022-04-04 17:39:58 +01:00
fd9fd1df05
Careful of skipping non-flashed pads for performance: they might still have a hole.
2022-04-04 15:03:01 +01:00
dad31f50b7
VRML export: fix a different arc to segment approx for NP holes and Plated holes.
2022-04-04 14:42:29 +02:00
ece9c45e95
VRML exporter: make export faster by using SHAPE_POLY_SET::PM_FAST.
2022-04-04 12:25:48 +02:00
d05f5337ed
VRML export: fix different error values to approximate arcs depending on options.
...
When exported with option "link 3D shapes to external files", the error value
was bigger because the VRML unit used in calculations differs from the one used
when merging 3D shapes in board file (for historical reasons).
Fixes #11326
https://gitlab.com/kicad/code/kicad/issues/11326
2022-04-04 12:25:48 +02:00
90af5a36d2
Show hole clearance lines around NPTH pads.
...
Also make the clearance line NONPLATED_HOLES colour, not the PADS_TH
colour.
2022-04-04 10:28:33 +01:00
f22316b868
Careful about hiding pad layers.
...
We also draw netnames and clearance lines based on some of these layers.
2022-04-04 10:28:33 +01:00
aee5ff8935
Make sure text caches get updated on move.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11319
2022-04-02 22:37:55 +01:00
0bdbfe1446
Pcbnew: add plot on all layers feature.
...
ADDED: Any addition board layers can be plotted on all selected board layer
when plotting.
CHANGED: The new plot to all layers feature made the plot edge cuts option
obsolete. Users must now select the edge cuts layer from the list of
plot to all layer selections to include edge cuts on all layers when
plotting.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/2449
2022-04-02 14:33:40 -04:00
bd18e340f4
eagle: introduce *.lbr footprint import test
...
Bugs found but not fixed yet:
* Reference and Value are not converted correctly yet
* HOTFIX: test commented out
* GP3906-TLP and UBLOX_ZOE_M8-0-10 are not able to import the description again
* HOTFIX: description removed from gold file
2022-04-02 20:07:16 +02:00
406c528ab7
altium: Create region for items on the KEEP_OUT_LAYER and use new Track unit-tests
2022-04-02 18:17:19 +02:00
f7cdc7af75
Apply a more sophisticated test for ignoring isInCoupledDiffPair.
...
The basic problem is that the DRC engine does length testing and skew
testing by collecting all the diff pair constituent parts and pairing them
itself. Since each part is collected on its own, we need to ignore the
'B' unit when evaluating any conditional expressions. However, doing this
in general means that when evaluating "OwnClearance()" we also ignore the
'B' unit and return the diff pair CLEARANCE_CONSTRAINT when we shouldn't.
This implements a more discerning test which know what the current requested
constraint is when evaluating expressions.
See also https://forum.kicad.info/t/solved-custom-differencing-rule-not-working-drc/34034/6
Fixes https://gitlab.com/kicad/code/kicad/issues/11314
2022-04-02 15:12:42 +01:00
b18e441a88
Free memory in dxf import sooner on bad_alloc
2022-04-02 09:57:30 -04:00
9f8c0a8185
Catch memory exhaustion trying to import large DXFs
...
See https://gitlab.com/kicad/code/kicad/-/issues/11308
2022-04-01 23:15:06 -04:00
737d65fd36
Skip zero-size elements when converting
...
Also fixes an assertion when converting to polygon from the board editor
Fixes https://gitlab.com/kicad/code/kicad/issues/11313
(cherry picked from commit 6706a5c462
2022-04-01 13:24:10 -07:00
d174af4006
Handle textboxes moving back to RECT shape (ie: cardinal rotation).
2022-04-01 16:12:23 +01:00
49c48e2fe0
Consistently handle env/prj variables
...
User-defined variables cannot be used for internally-reserved variables
Fixes https://gitlab.com/kicad/code/kicad/issues/11232
(cherry picked from commit c23679d9bd
2022-03-31 17:05:53 -07:00
1a9ef4bd0f
Add support for using a SpaceMouse to pan & zoom in the schematic editor.
2022-03-31 19:03:41 +00:00
bb43a3926a
Math and I don't get along. So just be pedantic about text rotation.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11247
2022-03-30 19:54:18 +01:00
c0d8657d97
Plot on all layers prep work.
...
We only need one bottom to top layer sequence definition.
Plot a sequence of layer IDs (LSEQ) in the order of the sequence.
Add helper method to layer set (LSET) to create a sequence of layer IDs
using another sequence for ordering.
2022-03-29 16:08:23 -04:00
b78a260326
Only write Allow DRC Violations if enabled.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11177
2022-03-29 19:31:02 +01:00
a54bbfe12b
Honour prime-event-location when starting router.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11239
2022-03-29 13:44:40 +01:00
a35ae8cdce
Don't re-fetch selection when running select-in-same-sheet.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11110
2022-03-28 21:54:24 +01:00
e51ab86225
Schematic Drag: fixes and improvements
...
Fixes:
* Various special cases around junctions on pins and dragging.
* Some rotations of endpoints resulting in a 45 degree rotate.
* Some cases where it was possible to get a line with neither
endpoint selected, and also substractive unselecting only one of two
selected endpoints unselecting both.
* Use line midpoint for sorting. Start and endpoints aren't
consistent in the order they appear on the X or Y axis. So,
we need to use the midpoint for our position for consistent
sorting when dragging groups of parallel lines where some
have the start and end reversed.
Other:
* Rename TEMP_SELECTED TO SELECTED_BY_DRAG. This is the actual meaning
of the flag, and should reduce confusion as
to when it should be used.
* Move usage of TEMP_SELECTED as an algorithmic mark to CANDIDATE
instead.
* Fix mistaken clearing of START_POINT and ENDPOINT.
* Move endpoint setting and clearing out of narrowSelection, and into
selectPoint and selectMultiple.
* Don't show dangling end warnings on new lines
2022-03-28 16:02:48 -04:00
6fa8cab188
Don't default to Annotate All just because the selection is empty.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11181
2022-03-28 17:52:50 +01:00
a2d4351b97
Correct initialization of justification.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11248
2022-03-28 17:11:20 +01:00
343b2681d4
Midpoints for eeschema rectangles and text boxes.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10362
2022-03-28 11:16:39 +01:00
9a342458fa
Fix a few Coverity and compil warnings.
2022-03-26 16:21:23 +01:00
150859c973
Try Coverity fixes that don't break unit tests.
2022-03-25 16:49:29 -04:00
7da7864f5e
Fix some Coverity issues.
2022-03-25 15:51:05 -04:00
7b2d9dfc0c
Fix some Coverity uninitialized scalar variable issues.
2022-03-24 13:17:07 -04:00
a6606924f1
GERBER_JOBFILE_WRITER: fix a crash due to use of a null pointer.
...
Can happens when it is created from a Python script.
Fixes #11227
https://gitlab.com/kicad/code/kicad/issues/11227
2022-03-24 17:54:05 +01:00
92a229eec7
ADDED separate user-defined color for page limits.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/5271
2022-03-24 14:11:41 +00:00
1d66925f5f
Enable bb and/or uvias when encountering them on Altium import.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10044
2022-03-22 22:33:51 +00:00
482dbcec54
All triangular trapezoid pads
...
A triangular trapezoid will have the deltaX/deltaY of the same size as
the length of that axis. This creates a three-point polygon, which is
perfectly valid for our use
(cherry picked from commit 4e98ce87c7
2022-03-22 13:39:55 -07:00
118a37f19f
Fix issues with importing NPTH pads from CircuitStudio.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10493
2022-03-22 18:08:05 +00:00
3271b43d4b
Formatting.
2022-03-22 18:08:05 +00:00
b679a21651
Zero out parent rule when overridden by local property.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11197
2022-03-21 20:49:35 +00:00
b3ae0fdca5
A little bit of nullptr safety.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11077
2022-03-21 20:07:33 +00:00
cf611f1742
Better safety around layersets.
2022-03-21 18:19:00 +00:00
40e0c8257d
Rotate textbox shape along with text.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11187
2022-03-21 18:19:00 +00:00
41c2a48802
Prevent crash on unplated holes
...
NPTH may not be flashed on any layer, so the set-layer-visible logic
shouldn't try to determine their layer for showing.
Fixes https://gitlab.com/kicad/code/kicad/issues/11193
2022-03-21 10:39:33 -07:00
d27d2e0ad9
Pcbnew: fix lost of focus after clicking on a wxChoice in toolbar.
...
After changing track width, via size, grid or zoom from the toolbar, the
canvas has no longer the focus on Windows. So we force the focus after clicking
on these widgets.
Fixes #11103
https://gitlab.com/kicad/code/kicad/issues/11103
2022-03-21 18:10:07 +01:00
4f62960334
Update message panel from PCB point editor and SCH drawing tools.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11186
2022-03-21 10:32:36 +00:00
73f835437e
Don't modify outer loop variable inside inner loop.
2022-03-19 19:37:01 +00:00
476f1a7d4d
Preload PCBnew find with selection when appropriate.
2022-03-19 19:37:01 +00:00
6bf47e44e4
pcbnew: DIALOG_PRINT_PCBNEW: activate right click context menu inside layer list.
2022-03-19 08:10:17 +01:00
3b6e8464c2
Fix expand variables for built-in
...
Allow falling back to the alternate variable definitions if the built-in
text block variables are not set.
Also push the project into variable resolution when plotting
Fixes https://gitlab.com/kicad/code/kicad/issues/11168
(cherry picked from commit c44d31fcfb
2022-03-18 16:47:18 -07:00
b3a319b77e
Append True to Python 3 AddPrimitivePoly() call
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11012
2022-03-18 20:00:32 +00:00
5aa561abe1
Add overlapping pad test and share some tests between board & fp editor DRC.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10086
2022-03-18 19:58:42 +00:00
dc39703d0e
Bring pcbnew print dialog in line with plot.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/2171
2022-03-18 13:37:20 +00:00
54c9e36556
Python, board.i: fix incorrect order of an include.
...
The result was ignoring PCB_SHAPE in pcb_text.i.
2022-03-18 14:19:14 +01:00
c4c8848fa3
Performance enhancements for Cleanup Tracks & Vias.Performance enhancements for Cleanup Tracks & Vias.Performance enhancements for Cleanup Tracks & Vias.Performance enhancements for Cleanup Tracks & Vias.Performance enhancements for Cleanup Tracks & Vias.Performance enhancements for Cleanup Tracks & Vias.Performance enhancements for Cleanup Tracks & Vias.Performance enhancements for Cleanup Tracks & Vias.Performance enhancements for Cleanup Tracks & Vias.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11119
2022-03-18 11:04:53 +00:00
0f359c8a3b
Careful of calculated fields when comparing board FPs with library.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10143
2022-03-17 13:19:25 +00:00
442aae19d9
Separate flashing check for connectivity
...
When building the connectivity database, we should not be using the
connectivity to check for shapes.
To make this deterministic, we introduce two flags (ALWAYS_FLASH and
NEVER_FLASH) that are used with connectivity building to determine
whether a pad is flashed for connectivity or not. ZONE <-> PAD/VIA
connectivity will be checked with ALWAYS_FLASHED and all other
connectivity will be checked with NEVER_FLASHED if they are marked for
potential annular ring removal. If they are not marked for removal,
they will be checked ALWAYS_FLASHED.
Fixes https://gitlab.com/kicad/code/kicad/issues/11114
2022-03-16 17:30:01 -07:00
4225f92573
Slight improvements to via drawing.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8717
2022-03-16 14:56:32 +00:00
62f813fddc
Better error reporting for PTH pads.
2022-03-16 14:56:32 +00:00
cabcaf933c
Cleanup.
2022-03-16 14:56:32 +00:00
fa5a484797
Remove unused variable.
2022-03-16 14:56:32 +00:00
f596ae3487
Allow mechanical-clearance checks between edge_cuts and other layers.
2022-03-16 14:56:32 +00:00
567fd5ba74
Specctra import/export: fix some issues (tested only with FreeRouter):
...
- Better handling of locked tracks than commit cbb6ca85
2022-03-16 12:31:45 +01:00
600dcd31ad
Allow track board edge clearance violations inside the holes of castellated pads.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10970
2022-03-15 00:05:23 +00:00
8d682002c3
Fix previous breakage from shared_ptr going out of scope.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10970
2022-03-14 23:57:50 +00:00
cbb6ca8500
Import specctra track locking.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11070
2022-03-14 23:02:19 +00:00
a81c8d4922
Save pointer to markers provider.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11136
2022-03-14 22:13:39 +00:00
e7bf4ab8fa
Separate board-edge silk clearance from mask-edge silk clearance.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10970
2022-03-14 20:19:09 +00:00
2ec21c7720
Don't check for board edge collision on castellated pads.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10970
2022-03-14 20:19:09 +00:00
c34dc13a8e
Rework on DIALOG_CLEANUP_TRACKS_AND_VIAS: do not immediately run the cleanup engine.
...
The cleanup engine is now run on request, before options are selected.
Needed for large boards because the calculation time can be significant.
2022-03-14 18:12:44 +01:00
65185f53a1
Rotate fp zones before comparing with library versions.
...
Also includes some performance fixes to not copy around triangulation
data when it's not needed.
Fixes https://gitlab.com/kicad/code/kicad/issues/10143
2022-03-14 15:53:24 +00:00
d74a0cdaa3
Don't pre-scale the line width
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/11122
2022-03-13 23:08:28 -04:00
ced1e68ea1
A bit of wxT().
2022-03-13 16:09:06 +00:00
06c1bccccd
Exclude hidden text from selection in FP Editor.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11111
2022-03-12 23:29:01 +00:00
db0b733be5
Clear DRC caches before running soldermask tests again.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10922
2022-03-12 19:44:34 +00:00
7fb4a2c0a5
CONNECTIVITY_DATA::IsConnectedOnLayer(): fix crash in some cases.
...
Fix crash when a zone do not have filled areas on a given layer.
2022-03-12 19:31:46 +01:00
b8557e77ee
Tweak the "pyd" extension if for windows to be completely inclusive
2022-03-12 09:22:01 -05:00
0a8718cd1d
Fix issue when we ask if a pad is connected to a zone we're in the middle of filling.
2022-03-12 14:17:53 +00:00
89e61ff73b
More performance enhancements for DRC.
2022-03-12 14:17:52 +00:00
e03b06927d
Fix rotation problems for knockout fp text, and implement 3D rendering.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11086
2022-03-12 14:17:52 +00:00
f14ef477cc
Fix a incorrect filename in a copy command (MSW specific).
...
Also fix a regression and respect the KICAD_BUILD_QA_TESTS build option.
2022-03-12 11:04:57 +01:00
7ab4d67e94
Make sure line style comboboxes get a default entry.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11083
2022-03-11 23:19:16 +00:00
6f555b6258
wxT() and some cleanup in DRC.
2022-03-11 23:19:16 +00:00
eec528ae48
Fix GCC build error on Linux.
2022-03-11 17:03:01 -05:00
ae307e1b34
Parallelize DRC triangulation, keepout processing, and sliver checking.
...
Also fixes issue with adding fractured polygons in sliver checking which
slowed the board from hell down to less than a crawl.
2022-03-11 20:52:11 +00:00
6ce1399811
Redraw pads when mask or paste layer is visible after board setup.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11079
2022-03-11 20:52:11 +00:00
79aafd1bd3
altium: support keepout restrictions in Arcs, Fills and Regions
2022-03-11 19:15:58 +01:00
8d05ca5982
Teardrop rework: avoid refill zones on a not updated connectivity data.
...
- Teardrops have now just their shape filled (much faster than a full refill)
- The full zone refill is no longer made after recreating teardrops.
- this is more compatible with the option Auto-refill zones"
Fixes #11106
https://gitlab.com/kicad/code/kicad/issues/11106
2022-03-11 16:12:27 +01:00
2bf56c2441
DIALOG_GLOBAL_DELETION and teardrop.cpp: fix incorrect call to GetLayer() for ZONES
2022-03-11 11:16:09 +01:00
d452f79860
pcbnew: search for nets
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/10601
2022-03-10 23:12:30 +00:00
f218da6ea5
Help repair invalid rotation settings
...
We had a period where we were writing invalid rotations leading to
values too large by a factor of 100. This clamps the stored values
while repairing those affected
Fixes https://gitlab.com/kicad/code/kicad/issues/11090
2022-03-10 09:44:26 -08:00
eb9ccea559
Performance improvement.
2022-03-10 13:46:42 +00:00
0440aa3d83
Extend layer LAYER_LOCKED_ITEM_SHADOW to draw shadow markers on other locked items:
...
tracks, texts, graphics.
2022-03-09 18:50:31 +01:00
016af235db
Pcbnew: add a GAL layer (LAYER_LOCKED_ITEM_SHADOW) to draw markers on locked footprints
2022-03-09 17:54:58 +01:00
e37bb2e0c3
swig: disable a few warnings generated by pcb_shape.i, math.i and version.i
2022-03-09 17:29:29 +01:00
663edcf665
Better progress indication for board from hell.
2022-03-09 14:30:21 +00:00
878c70c1ab
Pcbnew: fix erroneous IslandRemovalMode default mode in board files.
...
The default is ISLAND_REMOVAL_MODE::ALWAYS in *.kicad_pcb files
2022-03-09 13:17:18 +01:00
e7f379c31d
Pcbnew, Knockout texts: fix issues seen with rotated texts.
...
Fixes #11085
https://gitlab.com/kicad/code/kicad/issues/11085
2022-03-09 11:22:05 +01:00
e4b56ab7f1
Performance fixes for the board from hell....
2022-03-08 23:54:34 +00:00
392a3ec131
Fix typo which leads to catastrophic performance on boards with tons of zones.
2022-03-08 20:16:37 +00:00
f6dac9eb13
Support text knockouts in non-copper zones.
2022-03-08 18:06:41 +00:00
40fd8860fe
Plotting (and some bug fixes) for knockout text.
2022-03-08 18:06:41 +00:00
b6aa5bd1ed
Pcbnew: PCB_TEXT: save the Locked flag in file.
...
Previously, one could lock a graphic text on a board, but the lock state was not saved.
2022-03-08 17:35:26 +01:00
bafd8ac9d5
plot_board_layers.cpp: Add missing layers (USer_x) in list
...
Fixes #11072
https://gitlab.com/kicad/code/kicad/issues/11072
2022-03-08 14:41:10 +01:00
293021c58c
ADDED: knockout pcb and fp text.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7055
2022-03-08 13:22:20 +00:00
6934bc124c
Move temp save files to temporary directory
...
Avoid excess writes to the project directory to dodge issues with remote
file systems not fully writing data.
wxRename works across disk boundaries (in theory) and falls back to
wxCopy/wxRemove when it fails
Fixes https://gitlab.com/kicad/code/kicad/issues/10747
2022-03-07 20:13:28 -08:00
bf0f2aa4a8
Adjust bitmap text spacing a bit so it's closer to the stroke font.
...
This helps the text better match the highlighting when it gets small
enough that we switch to the bitmap font for performance.
2022-03-07 20:30:50 +00:00
a9ebb42ecd
altium: Parse keepout restrictions of tracks
2022-03-07 19:58:43 +01:00
f866d15154
Pcbnew: fix crash when clicking on a footprint on a filled zone area.
2022-03-07 13:56:47 +01:00
bf44ae907b
Minor fix for dialog.
2022-03-07 10:26:18 +00:00
0dc857b5ab
Clean up pad handling in 3D viewer.
...
Most importantly, create F_Cu/B_Cu layers if they're otherwise empty
but we have plated pads to render on them.
Fixes https://gitlab.com/kicad/code/kicad/issues/10207
2022-03-06 13:57:12 +00:00
dbfdd3fb56
Fix some Coverity warnings.
2022-03-06 09:48:33 +01:00
3cb1a689a7
pcbnew: Fix Bezier "Add Primitive" in Pad Creation Dialog
2022-03-06 00:35:53 +00:00
1fc99dd2c0
Don't call GetLayer() on a multi-layer object.
2022-03-05 23:07:43 +00:00
23088e6e1a
Minor performance enhancements for zone filler.
...
Be smarter about not knocking out some classes of pads twice.
2022-03-05 20:32:08 +00:00
fed5bcbdf6
Improvements for pads/vias in zones which knockout other zones.
...
1) Drop tiny islands which might cause connection problems.
2) Cleanup some dead code in filler
3) Don't estabilish a connection to an island that is fully covered
by whatever its connecting to.
Fixes https://gitlab.com/kicad/code/kicad/issues/11036
2022-03-05 18:59:53 +00:00
878c4d2f6b
Must clear arcs before calling Clipper.
2022-03-05 18:59:53 +00:00
cb6d6d7ef4
Settings: allow multiple project access from Python standalone
...
We can't handle this in the UI, but we can externally, so allow
it for Python scripting and eventually we'll use this in the UI
also...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/10540
(cherry picked from commit 1394509734
2022-03-05 13:04:19 -05:00
69453964b4
pcbnew_scripting_helpers: fix a potential crash when running a script outside kicad.
...
BOARD* LoadBoard( wxString& aFileName, IO_MGR::PCB_FILE_T aFormat ) crashes if a
old project file (*.pro) exists and the *.kicad_pro file doses not exists.
The crash happens when trying to convert the old config outside kicad.
2022-03-05 18:26:33 +01:00
cc5493e91e
DIALOG_COPPER_ZONE_BASE: better tool tip.
2022-03-05 18:23:08 +01:00
3bb1fd8311
Teardrops: fixes and enhancements:
...
- do not allow smoothing outlines: outlines are already optimized.
- do not allow settings incompatible with teardrop area (grid, thermal relief)
- DIALOG_COPPER_ZONE: export zone settings to similar zones only.
Fixes #11040
https://gitlab.com/kicad/code/kicad/issues/11040
2022-03-05 17:18:42 +01:00
c18d9b9baf
Normalize `IsInsideCourtyard`
2022-03-04 15:49:02 -08:00
cd7141fd10
Cache read arc data for stability
...
Arcs can be altered by the process of changing from on-disk
representation to in-memory representation. Saving back to disk without
modifying the arc should not modify the calculated values.
This stores a copy of the on-disk representation that is only used to
save back to disk in the event that the arc is not modified during
editing.
Fixes https://gitlab.com/kicad/code/kicad/issues/10442
2022-03-04 15:20:31 -08:00
8218f9ab44
Finally found the intermittant QA crash
...
When loading footprints/zones in parallel, we cannot reference a static
vector that gets cleared by other threads.
It is unclear why this element was ever static to begin with (premature
optimization?) but it has been this way for a long time. We never
noticed until we threaded load cycles, which gave the hatch a chance to
override itself and cause crashes
Fixes https://gitlab.com/kicad/code/kicad/issues/9888
2022-03-04 11:37:49 -08:00
006e1be69c
ZONE: display number of vertices on the info panel (regression fix)
...
This is a useful info because the calculation time depend on this number.
2022-03-04 10:42:32 +01:00
e7673f7198
Remove unneeded condition to rotate
...
The condition that the board must have elements on it before allowing
the rotate command is invalid as we allow rotating new elements before
placement
Fixes https://gitlab.com/kicad/code/kicad/issues/10581
(cherry picked from commit c1dcfdffb1
2022-03-03 16:04:22 -08:00
b5c2f0d39a
Remove the open array in favor of std containers
...
The containers allow iteration, size knowledge and lower bug surface
2022-03-03 16:03:26 -08:00
2d1fa48a73
Improve solder paste tooltips.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10585
2022-03-03 23:08:36 +00:00
c4b6801f3a
Improve some strings and measurements.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10482
2022-03-03 22:40:18 +00:00
ec5b7a57ec
Consistency in via dimensions terminology.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11024
2022-03-03 22:40:18 +00:00
9d927f3135
Check for additional connections between tracks
...
Prevents removal when a track is connected not just to other tracks but
also other connected items
Fixes https://gitlab.com/kicad/code/kicad/issues/10916
2022-03-03 12:07:20 -08:00
27db23eba0
FP_TEXT::ViewGetLOD() fix incorrect test (LAYER_MOD_VALUES color has no matter)
...
Fixes #11026
https://gitlab.com/kicad/code/kicad/issues/11026
Fixes #11028
2022-03-03 11:57:19 +01:00
adace996f4
qa/pns: refactored the P&S debug tool:
...
- factored out 'business' code from the UI code
- moved to the new DEBUG_DECORATOR interface
- UI-less log file and log player classes as a step towards P&S unit tests
2022-03-03 01:02:00 +01:00
45f7cf9571
router: rework the DEBUG_DECORATOR a bit:
...
- support for dumping complete PNS::ITEMs and generic SHAPEs
- support for log nesting levels
- wxT-ized strings
- more verbose output where needed
2022-03-03 01:02:00 +01:00
b6fc96c1d5
pcbnew: check for null SETTINGS in RATSNEST_VIEW_ITEM (prevents crash in the P&S debug tool)
2022-03-03 01:02:00 +01:00
2fafa55647
Maintain width of converted tracks
2022-03-02 10:45:53 -08:00
7e836ae27a
Select the copper layer before processing
...
If we are converting to tracks, the copper layer needs to be selected
before any other elements are processed, otherwise, we end up with the
default undefined layer
Fixes https://gitlab.com/kicad/code/kicad/issues/11025
(cherry picked from commit 9396735733
2022-03-02 10:41:44 -08:00
Jeff Young
jean-pierre charras
Marek Roszko
Seth Hillbrand
Tomasz Wlostowski
Mike Williams
Jon Evans
Alex
Wayne Stambaugh
luz paz
Ian McInerney
Miklós Márton
Fabien Corona
qu1ck
Marcus A. Romer
Roberto Fernandez Bautista
Thomas Pointhuber
markus-bonk
Frank Zeeman
Frank Palazzolo