* Delete Single Pad Net option does not delete the net if a zone use this net (i.e. is attached to this pad).
* pcb_parser accept now negative netcodes in zones (can happen with old files, which previously could crash Pcbnew)
* pcb_parser accept now files with incorrect or missing net count (can happen with old files, which previously could crash Pcbnew)
* if a zone has a non-existent net name it now keep this net name, and DRC detect it (previously, the net name was lost, and the DRC did not tected this issue).
* Drc test: now detect a "dead" net, i.e. a net with 0 pads, but still used by a zone. It happens easily after a schematic modification, when a net disappears or is renamed.
* if the current select plugin is the github plugin, one can select some of these libraries and add them to the table
* if the current select plugin is the kicad plugin, one can select some of these libraries and download them to make alocal copy.
They can added to the table after they are downloaded.
* Make generate button the default in Eeschema netlist dialog.
* Fix spacing issues in export IDF dialog.
* Make OK button the default in export IDF dialog.
* Remove unnecessary end dialog code from export IDF dialog.
* Improve resizing of export IDF dialog.
this option was possible only by modifying the way display options are managed.
before these changes, display options were a global DISPLAY_OPTIONS class instance.
Now each EDA_DRAW_FRAME(and derivated classes) includes its own DISPLAY_OPTIONS class instance.
As a consequence, some duplicate display option variables in these classes have been removed, because there were just duplicate variables of the DISPLAY_OPTIONS class instance.
Please, note the layer manager was already available in GAL mode, but is was the same as tne board editor, which is not good.
Now:
- In default mode or GAL mode, the look is the same.
- Only suitable technical layers (i.e. paired layers) are selectable from the layers manager (for special purposes, some other layers can be used, via the graphic items properties dialog)
* Change Read to Load in Pcbnew and Eeschema preference menus.
* Make electrical rules check status bar message the same for both the menu
and toolbar entries.
When the filename is not absolute, the page layout file is now searched first in project folder, and then in kicad template folder, if not found in project.
Fix issue when using a page layout file in project folder: eeschema and Pcbnew did not use it, unless using an absolute path.
Now, if the file path is nor absolute, it is seen as relative to the project (which is the expected behavior)
fp lib wizard: when pcbnew id compiled with USE_GITHUB_PLUGIN=OFF, the github plugin option is no more accessible (and the web viewer no more used).
Looked like a minor issue, but was due to a more serious bug, when using 2 different DSN_LEXERS which were not synchronized.
The fix is not perfect, but unfortunately, the parser used to read the PCB_PLOT_PARAMS in .kicad_pcb files is also used in legacy board file reader.
Therefore it is better than write 2 parser functions, one for legacy files, the other for the .kicad_pcb files, which make the same thing.
BOM dialog: remove a not very useful button, and merge its function with an other (not perfect, need more work)
Add message box to show info added in BOM python scripts (See scripts/bom-in-python/README-bom.txt about this info)
This is due to the fact the boost::pylygon function resize ( a inflate/deflate function) used for calculations does not work with boost version >= 1.56.
Use Clipper inflate/deflate function instead. It is faster and works fine.
* Make title capitalization consistant.
* Replace some instances of module with footprint.
* Use angle instead of orientation where appropriate.
* Remove abbreviations where it made sense.
* Coding policy fixes.
- fixed walkaround bug causing unwanted overlap/clearance violation when the first segment of trace being laid intersects the obstacle's hull at the same point twice (ie. goes in, turns around and goes out).
- fixed placer bug not splitting the start segment after toggling via placement or changing trace width
- re-worked PNS_LINE_PLACER and PNS_ROUTER classes a bit, removing duplicate class members
- cleaned up Andrew's blind/buried via fixes
- fixed 'custom via width' dialog bug updating the width even when closed/cancelled
- fixed incorrect radius of drawn microvias
* Fix assertions in Eeschema when editing net labels, electronic rules check,
and plotting.
* Fix assertion when opening PCB calculator.
* Fix assertions in Pcbnew when changing footprints in footprint properties
dialog and adding or editing text.
* Add more missing source code licenses.
* Fix coding policy violations (tabs and trailing white space) in Python
scripting code.
* Add stable release policy to full documentation build.
* Make all files generated by make_lexer() dependencies of thier respective build targets.
* Make building Boost a dependency for all libraries.
* Remove duplicate make_lexer() call for Specctra lexer files.
* Improve VRML export dialog lay out.
* Make the OK button the default action in the export dialog.
* Make 3D model export work correctly and avoid redundant file copies.
* Fix embedded path separators in wrl files on windows.
* Fix absolute model file path creation in wrl files.
* Clean up VRML export code.
* Change hot key editing contol from wxGridTableBase to wxListCtrl.
* Separate hot key lists into separate tabs rather than one large list.
* Coding policy fixes.
* Many path related fixes.
* Fix execution of external applications.
* Update mac-osx.txt.
* Add top-level links for standalone applications inside OSX bundle.
* Fix document icons for Eeschema and pl_editor.
* Create individual bundles for standalone applications inside the main application bundle.
* Add usual 'site-packages' to python path in OSX bundle.
* Fix name of OSX bundle plugin folder.
Rename "Switch highcontrast" to "Toggle High Contrast".
Eliminate most of the abbreviated hotkey titles.
Doxygenize dialog_hotkeys_editor.h and add missing license block.
Display <unassigned> if key code is 0 (NULL).
Refactor hotkey editor to use tab control instead of one giant list.
Each tab is a separate hotkey section.
Modify EDA_HOTKEY_CONFIG to change the m_Comment member to m_Title for a new purpose.
We want a pretty title in the hotkey editor. We use m_Title for the key export comment which
still conveys the purpose just as easily.
Refactored usage of wxGrid into wxListCtrl which allows capturing navigation characters
and also works better (single selection is built in).
Add hotkey overwrite prompts that are paired with "Common" section. It will check if a hotkey
overlaps with the proper sections. i.e. Common with the all other sections; or Section 1 with just Common.
Right-click menu removed due to wxListCtrl being able to catch the special keys properly.
* Fix creation of single app bundle with respect to scripting support.
* Cleanup scripting search paths for OSX.
* Fix some small CMake bugs from previous OSX build change.
* Optimize bundle file structure to be consistent with Apple specs.
* Add helper script for compiling wxWidgets and wxPython
* Update OSX build instructions.
Handles % macro expansion in user texts inside pcb modules.
At the moment the following are available:
%% A plain %
%R Insert the reference
%V Insert the value
* Compile all binaries into a single application bundle.
* Use CMake BundleUtilities to make application bundle relocatable.
* Restructure build output to directly create an image file.
* Fix default search paths.
* Set KIGITHUB environment variable.
* Added patch to fix wxWidgets so names for OSX.
*.i : fix coding style issues.
python method: add BOARD_ITEM Duplicate, which is a wrapper to Clone(). ( defined as Cast_to_BOARD_ITEM(selt.Clone()).Cast() )
update some .py examples.
change also name TEXTE_MODULE::RotateWithModule to TEXTE_MODULE::RotateTransformWithModule for same reason.
Pcbnew: fix Bug #1374484 (text changes position when module is flipped and rotated). Fix also some bugs in modedit, in block commands.
Schematic component properties dialog: add 2 helper buttons to manage the chip name (name of the corresponding part in lib)
- a browse button to chose an other chip name
- a test button, to know if the part exists. If not existing, list the parts found when searching using a case insensitive comparison.
Also do not allow copper layers, solder paste and solder mask: put Ref or Value on these layers has no sense, and can create serious issues on the board.
Since reference and value are not anymore always on silk changed the label on the corresponding options in the plot dialog
The 'proper Gerber extensions' was renamed in dialog as 'Protel Gerberl extensions': I don't know if it was a typo/misunderstanding or what but the proper extension is gbr; the set of alternative extensions seems to be the one used by Protel/Altium.
The members SetIgnoreMTextsOnCopper, SetIgnoreMTextsOnCmp,
SetIgnoreModulesOnCu, SetIgnoreModulesOnCmp in the collector guide are
renamed to the clearer SetIgnoreMTextsOnBack, SetIgnoreMTextsOnFront,
SetIgnoreModulesOnBack, SetIgnoreModulesOnFront
Modified the collector and drawing behaviour for text in modules as
discussed in the mailing list.
* Now module text on layers different than Silk should work! *
Still need UI support for setting the layer in the module editor.
- Removed the friends MODULE and FOOTPRINT_EDIT_FRAME from TEXTE_MODULE
(as in the @todo comment)
- Refactored the Rotate/Flip/Mirror for text in modules into the
TEXTE_MODULE class itself (members RotateWithModule, FlipWithModule,
MirrorWithModule)
- New behaviour in coloring text on screen: reference and value still
take the color from the MOD_TEXT_FR_VISIBLE and MOD_TEXT_BK_VISIBLE
visibles; other text takes the color of the layer containing it
(except when hidden, obviously) but still get its visibility
controlled by those visibles (probably the most intuitive and useful
behaviour)
- Still need to decide: should text on a layer be hidden when the layer
is? Probably yes (still to be implemented);
- Some comment fixed and many cast converted to static_cast
- Reference is visible on silk and the corresponding assembly layer
- Reference is shown on assembly always on the component insertion point
Hidden references are not forced shown in assembly plots (there is
already a user option for that)
* Create GetNewConfig() and GetKicadConfigPath() to unify configuration file
creation and location.
* Move Windows configuration out of the registry into configuration files.
* Move Linux configuration files from $HOME to $HOME/.config/kicad to eliminate
configuration file pollution in the users $HOME folder.
* Fix a bug in the configuration file where the Eeschema hot keys are saved.
* Add hot key handled return indicator to DRAW_FRAME::GeneralControl() and
DRAW_FRAME::OnHotKey() and all classed derived from DRAW_FRAME.
* Add code to all GeneralControl() and OnHotKey() functions to return true if
hot key was handled.
* Call event skip in DRAW_PANEL::OnKeyEvent() when key event is not handled to
allow default menu event handler to function properly.
* Refresh canvas when user cancels edits so that the discarded sheet is
cleared from the schematic.
* Add file name validation to the sheet properties dialog to prevent
illegal file name characters from being entered into the text control.
* Rename FOOTPRINT_NAME_VALIDATOR to FILE_NAME_CHAR_VALIDATOR for clarity.
wxUpdateUIEvent events can be sent to parent frames, when opening a menu in a child frame, if parent and child frame share same ID fro menuitems (or tools)
The wrong menuitem can be used in some cases ( because there are more than one menuitem with the same identifier), by a wxUpdateUIEvent event function run in a parent frame.
*) When kicad.exe closes a project, close any open KIFACEs so that they cannot
get disassociated from their true PROJECT.
*) Allow loading eeschema library editor from kicad.exe
*) Allow loading pcbnew library editor from kicad.exe
*) Rename LIB_COMPONENT to LIB_PART.
*) Add class PART_LIBS, and PART_LIB.
*) Make PART_LIBS non-global, i.e. PROJECT specific.
*) Implement "data on demand" for PART_LIBS
*) Implement "data on demand" for schematic SEARCH_STACK.
*) Use RSTRINGs to retain eeschema editor's notion of last library and part being edited.
*) Get rid of library search on every SCH_COMPONENT::Draw() call, instead use
a weak pointer.
*) Remove all chdir() calls so projects don't need to be CWD.
*) Romove APPEND support from OpenProjectFiles().
*) Make OpenProjectFiles() robust, even for creating new projects.
*) Load EESCHEMA colors in the KIWAY::OnKiwayStart() rather in window open,
and save them in the .eeschema config file, not in the project file.
*) Fix bug with wxDir() while accessing protected dirs in kicad.exe
*) Consolidate template copying into PROJECT class, not in kicad.exe source.
*) Generally untangle eeschema, making its libraries not global but rather
held in the PROJECT.
3dviewer: back to double (from float) in class S3D_MASTER for 3 members (m_MatScale, m_MatRotation, m_MatPosition) which are used in dialogs and r/w file functions, which expect double.
Using float create minor but unwanted issues in r/w file functions.
S3D_MATERIAL: enable all color options: if a 3d shape has bad color parameters, the shape must be modified, not the 3d rendering.
The rendering now matches what we see in other vrml viewer like FreeCAD.
Some minor coding style fixes.
Remove a minor warning message in Debug mode for 2 dialogs.
Pcbnew: update Gerber X2 file format (File Attribute) to very last X2 specification
Eeschema: Fix a minor bug in block selection (sometimes the last selected component was select instead of items in selected area)
and better drag behavior when draging an item by the drag hotkey.
2) PNS router incorrectly detects collisions with blind/buried vias that don't actually intersect the active layer
3) PNS router silently converts blind/buried vias to through-board vias when shoved
Also fix incorrect backannotation when footprint names contain spaces (put spaces in names is always a bad idea)
* Fix minor Bug #1349058 Choose component dialog: Search field loses focus after entering a character and internationalize the dialog.
* Fix a subtle bug which prevent eeschema to read the project config file when launched from kicad manager, and when kicad.pro is not found.
* in file/library save as..., remove option to save a lib under the legacy format (which is not possible and creates an error message)
* if the current loaded lib is a legacy lib, when the user try to save or delete a footprint, displays a message which explains what the user should do.
* add a suitable dialog to select/create a .pretty folder library (a file dialog or a dir dialog coming from wxWidgets is not friendly usable.)
- DIALOG_DXF_IMPORT works with PCB_BASE_FRAME instead of PCB_EDIT_FRAME
- imported items are not immediately added to a BOARD
- imported items are held in a list, instead of vector
- imported items are instantly visible in GAL view
- added DIALOG_DXF_IMPORT::GetImportedItems()
- code formatting
Event handlers are (dis)connected depending on the active view.
TOOL_DISPATCHER inherits from wxEvtHandler, so now it receives events directly instead of being fed by external handlers.
The default layer stack between these 2 types was swaped in pad definition, and also in the dialog pad properties.
This double swap creates no bug, but creates bugs in the footprint wizards (SMD or CONN pads do not have the right layer stack)
FYI, the CONN pad type should be removed soon.
* default file ext is now .gbr (the "official extension")
* some outdated commands remoded.
* mainly use mm and 4.5 format instead of inches and 3.4 format. this is mandatory,
because the 3.4 format (comming from old pcbned internal units) creates truncations in coordinates.
(with serious issues in polygons which can appear self-intersecting afer truncation)
2) Fix passing wxString to common/config_params so lookup keys
can be dynamically generated. This gives ~/.kicad files all the colors.
3) Fix LEGACY_PLUGIN so it loads all layer types and masks properly.
4) Extend the table in router/pns_index.h to 128 from 64.
2) Change from legacy Cu stack to counting down from top=(F_Cu or 0).
The old Cu stack required knowing the count of Cu layers to make
sense of the layer number when converting to many exported file types.
The new Cu stack is more commonly used, although ours still gives
B_Cu a fixed number.
3) Introduce class LSET and enum LAYER_ID.
4) Change *.kicad_pcb file format version to 4 from 3.
5) Change fixed names Inner1_Cu-Inner14_Cu to In1_Cu-In30_Cu and their
meanings are typically flipped.
6) Moved the #define LAYER_N_* stuff into legacy_plugin.cpp where they
can die a quiet death, and switch to enum LAYER_ID symbols throughout.
7) Removed the LEGACY_PLUGIN::Save() and FootprintSave() functions.
You will need to convert to the format immediately, *.kicad_pcb and
*.kicad_mod (=pretty) since legacy format was never going to know
about 32 Cu layers and additional technical layers and the reversed Cu
stack.
They are now member of EDA_DRAW_FRAME.
This change could fix Bug #1330781 (Background color change in Eeschema affects background color in Pcbnew)
Show page limits has meaning only for the schematic editor, the board editor and the page layout editor.
Draw background color selection exists only in eeschema and page layout editor.
In pcbnew, only a black background is allowed.
A side effect is now the user should set the background color in schematic editor, and the library editor (2 different options).
The default is still the white color.
- Refactored the common part of cursor key movement and crosshair update
in the various GeneralControl
- Add x10 movement with the keyboard (CTRL modifier)
- Avoid fixup of the cursor position by dummy mouse movements generated
by cursor warping (original analysis and idea Chris Gibson)
- Do key handling in a way to permit sub-pixel cursor movement
Change class PROJECT to use a generalized wxString in place of the
RETAINED_PATH items, so that new session and project specific strings
of any purpose can be saved there, for the life of a session.
This workaround was already used (bzr 4301, in file plot_board_layers.cpp) also to avoid similar crashes (uses 18 segments instead of 16 to approximate a circle by segments).
Minor code cleanup in dialog_plot.
Do not pay attention to add/remove files - it seems there may be a bug in git-bzr-ng plugin. I have checked them, they stayed exactly the same as before.
Removed SetCurrentClassName() (it was not used anywhere and less safe than SetCurrentClass()).
Added BOARD_DESIGN_SETTIGNS::GetDefault() to make some pieces of shorter and clearer.
Fix ( workaround only) crash (Windows only) when a quasi modal frame (like footprint viewer) was called from a dialog (like the component properties dialog in schematic editor).
Very minor other fixes.
Most of the changes are just adding GetDesignSettings() before every occurence of m_NetClasses.
More complex changes:
class_netclass.cpp - NETCLASS does not store the pointer to the parent BOARD anymore. Added function SetParams( BOARD_DESIGN_SETTINGS& ).
class_netclass.h - Removed GetTrackMinWidth(), GetViaMinDiameter(), GetViaMinDrill(), GetuViaMinDiameter(), GetuViaMinDrill() as they were refering to BOARD_DESIGN_SETTINGS anyway (they are not net class specific).
kicad_plugin.cpp - filters out empty nets (that are anyway not saved) when storing net class information. Previously it was done in NETCLASS::Format() function.
*) Implement a framework for "Data Load On Demand".
*) Implement FP_LIB_TABLE* PROJECT::PcbFootprintLibs(), which is the first
prototype.
This allows the project specific footprint tables to be part of the Module Editor
when invoked from Eeschema.
*) Implement a framework for "Data Load On Demand".
*) Implement FP_LIB_TABLE* PROJECT::PcbFootprintLibs(), which is the first
prototype.
This allows the project specific footprint tables to be part of the Module Editor
when invoked from Eeschema.
*) Eeschema can now show the footprint editor.
*) Eeschema can now invoke the footprint picker from the library part field editor.
*) KIWAY_PLAYER::ShowModal() takes aResultantFocusWindow that tells what window
to give the focus to. Required since frames are often near the top of the
hierarchy and they are invoked by a peer, not a parent.
*) Eeschema can now show the footprint editor.
*) Eeschema can now invoke the footprint picker from the library part field editor.
*) KIWAY_PLAYER::ShowModal() takes aResultantFocusWindow that tells what window
to give the focus to. Required since frames are often near the top of the
hierarchy and they are invoked by a peer, not a parent.
*) KIWAY_PLAYER::IsModal() is now a retained state, controlled by SetModal()
*) Fully re-work the KIWAY_PLAYER::ShowModal() to use a nested event loop.
*) Add support to DIALOG_SHIM for a "quasi-modal" dialog presentation and mode.
See top of dialog_shim.cpp about that for benefits and need.
*) You can now pick footprint from the schematic component field dialog, although
if you do this before you open the BOARD, you will only get the global footprint
libraries, not also the project specific ones. Opening the BOARD first avoids this
problem.
This is the first example of cross KIFACE invocation, it is also the first
instance of using a TOP_FRAME other than FRAME_PCB as the first thing. It works,
but it's missing support for opening the project specific table because
historically the FRAME_PCB did that. This is now starting to expose all the near
term needs for KIWAY_PLAYER <-> PROJECT interaction, independence and out of
sequence usage.
A fix for this will be coming in a few days.
However it mostly starts to show why the KIWAY is terribly useful and important.
*) KIWAY_PLAYER::IsModal() is now a retained state, controlled by SetModal()
*) Fully re-work the KIWAY_PLAYER::ShowModal() to use a nested event loop.
*) Add support to DIALOG_SHIM for a "quasi-modal" dialog presentation and mode.
See top of dialog_shim.cpp about that for benefits and need.
*) You can now pick footprint from the schematic component field dialog, although
if you do this before you open the BOARD, you will only get the global footprint
libraries, not also the project specific ones. Opening the BOARD first avoids this
problem.
This is the first example of cross KIFACE invocation, it is also the first
instance of using a TOP_FRAME other than FRAME_PCB as the first thing. It works,
but it's missing support for opening the project specific table because
historically the FRAME_PCB did that. This is now starting to expose all the near
term needs for KIWAY_PLAYER <-> PROJECT interaction, independence and out of
sequence usage.
A fix for this will be coming in a few days.
However it mostly starts to show why the KIWAY is terribly useful and important.
*) Rework the set language support, simplify it by using KIWAY. Now any major
frame with a "change language" menu can change the language for all KIWAY_PLAYERs
in the whole KIWAY. Multiple KIWAYs are not supported yet.
*) Simplify "modal wxFrame" support, and add that support exclusively to
KIWAY_PLAYER where it is inherited by all derivatives. The function
KIWAY_PLAYER::ShowModal() is in the vtable and so is cross module capable.
*) Remove the requirements and assumptions that the wxFrame hierarchy always
had PCB_EDIT_FRAME and SCH_EDIT_FRAME as immediate parents of their viewers
and editors. This is no longer the case, nor required.
*) Use KIWAY::Player() everywhere to make KIWAY_PLAYERs, this registers the
KIWAY_PLAYER within the KIWAY and makes it very easy to find an open frame
quickly. It also gives control to the KIWAY as to frame hierarchical
relationships.
*) Change single_top to use the KIWAY for loading a KIFACE and instantiating
the single KIWAY_PLAYER, see bullet immediately above.
*) Add KIWAY::OnKiwayEnd() and call it from PGM_BASE at program termination, this
gives the KIFACEs a chance to save their final configuration dope to disk.
*) Add dedicated FRAME_T's for the modal frames, so m_Ident can be tested and
these modal frames are distinctly different than their non-modal equivalents.
KIWAY_PLAYER::IsModal() is !not! a valid test during the wxFrame's constructor,
so this is another important reason for having a dedicated FRAME_T for each
modal wxFrame.
On balance, more lines were deleted than were added to achieve all this.
*) Rework the set language support, simplify it by using KIWAY. Now any major
frame with a "change language" menu can change the language for all KIWAY_PLAYERs
in the whole KIWAY. Multiple KIWAYs are not supported yet.
*) Simplify "modal wxFrame" support, and add that support exclusively to
KIWAY_PLAYER where it is inherited by all derivatives. The function
KIWAY_PLAYER::ShowModal() is in the vtable and so is cross module capable.
*) Remove the requirements and assumptions that the wxFrame hierarchy always
had PCB_EDIT_FRAME and SCH_EDIT_FRAME as immediate parents of their viewers
and editors. This is no longer the case, nor required.
*) Use KIWAY::Player() everywhere to make KIWAY_PLAYERs, this registers the
KIWAY_PLAYER within the KIWAY and makes it very easy to find an open frame
quickly. It also gives control to the KIWAY as to frame hierarchical
relationships.
*) Change single_top to use the KIWAY for loading a KIFACE and instantiating
the single KIWAY_PLAYER, see bullet immediately above.
*) Add KIWAY::OnKiwayEnd() and call it from PGM_BASE at program termination, this
gives the KIFACEs a chance to save their final configuration dope to disk.
*) Add dedicated FRAME_T's for the modal frames, so m_Ident can be tested and
these modal frames are distinctly different than their non-modal equivalents.
KIWAY_PLAYER::IsModal() is !not! a valid test during the wxFrame's constructor,
so this is another important reason for having a dedicated FRAME_T for each
modal wxFrame.
On balance, more lines were deleted than were added to achieve all this.
- Converted the Next/Prev C casts to static casts and removed the type
unsafe ones
- Splitted as virtual the VIA::Flip member instead of using RTTI
- Heavily refactored the 'unconnected track' cleanup routine
- Misc constification
- SEGVIA becomes VIA
- Drill size moved from TRACK to VIA
- Removed shape from TRACK, becomes ViaType in VIA
- GetTrace becomes GetTrack, for uniformity
- Some minor constification and typo fixes
(for instance, when a footprint from the currently edited board is loaded in the footprint editor, and when the board is cleared or reloaded)
In footprint editor, the net names are no more shown od modifiable (becuase the footprint editor does not know anything about net names.
This change should allow the changes planned in pcbnew.
*) void KIWAY::ExpressMail( FRAME_T aDestination, MAIL_T aCommand, const std::string& aPayload, wxWindow* aSource=NULL );
*) virtual void KiwayMailIn( KIWAY_EXPRESS& aEvent );
*) enum MAIL_T expansion into the brave new world if cross KIWAY_PLAYER communications.
Let the KIWAY_PLAYING begin.....
through well conceived mail from one KIWAY_PLAYER to another.
Get thinking now. Add a new MAIL_T value, then send ExpressMail(),
and receive it in KiwayMailIn(), it's that easy.
Eeschema, Pcbnew, and Cvpcb all run under the same process now,
FOR THE VERY FIRST TIME!
*) Added KIWAY::PlayerCreate(), PlayerClose(), and PlayersClose().
*) Factored FRAME_T into <frame_type.h> from ID_DRAWFRAME_TYPE.
*) Found that the following command line is helpful for collecting all the *.kiface
files into the <build>/kicad/ directory so that kicad can find them.
$ cp `find . -name '*.kiface'` kicad/
Maybe somebody will want to rework how the CMake files are organized so all
the binaries can go into the same place. See python-a-mingw-us.
*) This might fix the problem on the Mac where child process windows were not
coming to the front. See ->Raise() in kicad/mainframe.cpp.
*) You can set USE_KIFACE to 0 in kicad/mainframe.cpp to chain load child exes
instead of using the KIFACE modules directly, i.e. revert.
if it is running under single_top.cpp or under a project manager.
*) Test Kiface().IsSingle() when adding menus, some operations are not permitted
when running under a project manager and the KIWAY_PLAYER is pegged to a
specific project.
*) Implemented KIWAY::KiFACE() so it loads *.kiface files. They still have to be
in the same directory as the main *.exe launcher, so this presents some difficulty
when the binaries are not yet installed but rather the *.kiface files are still
in their original build directories. For today, I simply copied _pcbnew.kiface
to build/kicad/.
*) Add a test case to kicad/mainframe.cpp just to get an early peek at loading
_pcbnew.kiface under the C++ project manager. Got that working for one
specific invocation just for proof of concept. Surprise, it works.
was used locally. Then comment it out in favor of a newer strategy for
filling in nicknames in cvpcb.
Add MODULE* FootprintLoadWithOptionalNickname( const FPID& aFootprintId )
throw( IO_ERROR, PARSE_ERROR );
from code found elsewhere.
Maciej Suminski
jean-pierre charras
Wayne Stambaugh
unknown
unknown
Paulo Henrique Silva
unknown
Fat-Zer
Bernhard Stegmaier
Nick Østergaard
Blair Bonnett
Paul LeoNerd Evens
Camille
John Beard
Tomasz Wlostowski
Marco Ciampa
Michal Jahelka
unknown
unknown
Henri Valta
Lorenzo Marcantonio
Andrew Zonenberg
Dick Hollenbeck
Moses McKnight
unknown
Michael Narigon
unknown
Andrew Zonenberg
Kirill Mavreshko
unknown
john.j.
Andrey Fedorushkov