bf1cb71eb7
Revisions on Gareth's comments.
...
o Implemented byte writes to EEPROM now that the emulator has a
byte-wide target write.
o Added comment describing the reason that mass erase doesn't work.
o Removed all unused code.
o Changed to Linux kernel indent style.
o Changed to Linux kernel function to parenthesis style.
o Stub generation doesn't use Perl, switched to sed. Also, only
including the instructions instead of the source and the instructions.
o Handling unaligned destination writes.
2015-03-08 16:25:22 -07:00
e0a8ce5a88
STM32L0x target support.
...
Target support for stm32l0's and stm32l1's including option bytes and
data EEPROM. This module will superceed the previous stm32l1 driver.
o Program flash write and erase.
o Options modification and interpretive status.
o Stubs for program flash writes and erases. Stubs are modestly
faster than non-stub version. The stm32l0 will not execute stubs
when the MCU has crashed. A monitor option may be used to force
non-stub flash writes.
o Stubs generated from C++ code and converted to arrays of half-words.
o Writes to data EEPROM supoprted when loading segments.
o EEPROM data monitor command to write words.
o Stubs supported on stm32l1.
2015-03-08 16:17:34 -07:00
0d99e22a26
Quieten build system.
2015-03-07 11:03:50 -08:00
1eac78b1c8
Move targets to make bin and hex files to toplevel makefile.
2015-03-07 11:03:50 -08:00
c8f469c868
SAM4S: Erase flash in 8K instead of 16K chunks.
2015-03-05 10:46:22 -05:00
49390fee2a
Fix Windows DFU instructions in the Hydrabus readme.
2015-03-04 20:22:19 -08:00
9f0c29d329
Add support for HydraBus (tested with SWD with STM32F405 and SWD+JTAG with LPC4330 M0/M4)
2015-03-04 20:22:00 -08:00
c731c6ece3
Make F4 conditionals check STM32F4, not F4DISCOVERY.
2015-03-03 21:39:29 -08:00
2e37db2270
Error on any failure on 'make all_platforms'
2015-03-02 23:14:43 -08:00
87b8f330f0
Add a makefile target to build all platforms.
2015-03-02 22:20:25 -08:00
3e466f2d23
Factor out timing routines common to all STM32 targets.
2015-03-02 21:59:04 -08:00
b07ffffcee
Factor out common cdcacm.c from stm32 and tm4c.
...
Cleaned up interface to enter bootloader and read serial number.
2015-03-02 10:16:33 -08:00
4d4813de87
Clean up includes everywhere.
...
All source files include general.h first and before anything else.
This inlcludes platform.h and platform_support.h
No header file needs to include to include any of these, but should include
any others needed for it's own declarations.
2015-03-01 22:16:04 -08:00
9d80641261
Move common platform include to a common directory.
2015-03-01 20:15:31 -08:00
476f83b69a
Move common USB stuff out of platform header files.
2015-02-28 22:48:26 -08:00
5eff0ab5d6
Factor out common GPIO code in STM32 platforms.
2015-02-28 22:09:50 -08:00
48fb7ec662
Add missing includes to fix warnings.
2015-02-28 22:06:10 -08:00
75001a4421
Factor Morse code functions out of platform code.
2015-02-28 22:05:10 -08:00
5d136398e1
Use sensible return convention for platform_target_get_power()
2015-02-28 21:23:24 -08:00
1b2cd547bc
Merge pull request #72 from dlaw/master
...
Add support for SAM4 erase command
2015-01-26 10:59:32 +13:00
1552218e8f
Merge pull request #71 from maknoll/master
...
SAM3S support
2015-01-26 10:56:52 +13:00
b771d0dcd6
Add support for SAM4 erase command
2015-01-23 16:36:12 -05:00
a7283196d1
SAM3S support
2015-01-22 16:09:01 +01:00
ea78e2d737
Complete refactor of samd20 -> samd
2015-01-18 22:40:02 +00:00
565795e168
Added support for SAMD10/11/21, and list of tested SAM D devices
...
This allows blackmagic to be used with the new Arduino Zero board via
the unpopulated SWD header on the east end of the board.
2015-01-18 22:35:59 +00:00
3726061773
Support for the NVMCTRL Security Bit (PROT=1)
2015-01-18 20:46:26 +00:00
e75ea64a01
Renamed nvmc control a register to match datasheet
2015-01-18 14:11:58 +00:00
1c1312b467
Added better feedback for samd erase failures
2015-01-18 13:22:41 +00:00
a3ab9b24d1
Avoid repetition of cortexm code in stmd20 driver.
2015-01-18 12:16:17 +13:00
f1981925b3
Merge branch 'samd20-revb-fix' of https://github.com/richardeoin/blackmagic into richardeoin-samd20-revb-fix
2015-01-18 11:03:10 +13:00
cad30cfa39
Fixed run command on SAM D20 old revision B silicon.
...
This appears to be related to Atmel Errata Reference 12015 (see §
35.4.1 DSU in the datasheet) but only applies to revision B silicon -
not revision C. While this is an old silicion revision (latest is
revision E as of 17 Jan 2015) I found one on a development board.
2015-01-17 18:58:00 +00:00
9072faf6ca
Fixed spaces / tabs from last commit
2015-01-17 18:35:36 +00:00
c12002b636
Check target_attach succeeded in vRun command, and return error if not
2015-01-17 18:30:58 +00:00
abcc04d4f3
Merge pull request #63 from beewoolie/static-stubs
...
Fix to move stubs into rodata.
2015-01-17 13:18:20 +13:00
985627af7e
SAM4S support
2015-01-12 14:53:58 -05:00
da28970c3e
Fix to move stubs into rodata.
...
o Stubs were declared as globals which means they will be initialized
data. No need for this. Now, stubs are static const and are only
present in the program image.
2015-01-09 18:18:10 -08:00
9c5ffd61f7
First cut at Freescale Kinetis support.
2015-01-06 22:26:00 +13:00
d162e75ceb
stm32f4.c: Add STM32F411 ID.
2014-12-23 21:32:21 +13:00
fdd7799304
Merge pull request #60 from themadinventor/lp-icdi-clean
...
Added (preliminary) support for TI TM4C123 Launchpad
2014-12-23 21:31:43 +13:00
346258934b
Added support for TI TM4C123 Launchpad
2014-11-23 22:59:16 +01:00
9434299613
Add support for halfword memory accesses.
2014-10-21 00:12:50 +02:00
fd9eef821e
Revert USB double buffered OUT handling on STM32F1.
...
This introduced a bug where the endpoint can get stuck, forever sending NAK.
2014-10-16 13:50:56 -07:00
f85a8c4ebb
Fix build for f4discovery by defining platform_hwversion().
2014-10-16 13:50:56 -07:00
a5549d630c
Whitespace cleanup.
2014-10-16 13:50:56 -07:00
60626e5bbe
Merge pull request #57 from aibara/dev/lpc43xx_wdt
...
LPC43XX: Attempt to handle case of running WDT.
2014-09-17 10:14:21 +12:00
c5abc9a0bd
LPC43XX: Attempt to handle case of running WDT.
...
If the WDT is running, it may reset while we are trying to flash.
Since we can't disable it, we set a long period and attempt to pet it
before each IAP call.
2014-09-16 14:54:24 -07:00
9fda010b32
Give up unwinding a fault if reading the stack fails.
2014-09-12 12:24:43 +12:00
091389b982
SAMD20 prints die revision
2014-09-03 21:17:48 +12:00
f4e20d0d04
Ooops - Semicolon from last commit :-)
2014-09-03 21:17:48 +12:00
f4474557d0
SAM D20 MBIST shouldn't fail silently
2014-09-03 21:17:48 +12:00
39a0b064af
Use external access DSU range
2014-09-03 21:17:48 +12:00
2a444ab1fb
Fixed SAM D20 support with reset attached.
...
monitor connect_srst enable can be used to connect to targets that re-use the SWCLK pin
2014-09-03 21:17:48 +12:00
e75798f201
Optimised flash write, programming speed is now approx. 2x faster
2014-09-03 21:17:48 +12:00
02812b6bf1
Added notes about the datasheet and NVMCTRL Security Bit
2014-09-03 21:17:41 +12:00
945a2802d5
Atmel SAMD20 support
2014-09-03 21:17:41 +12:00
9d9ecb572e
Assert SRST when scanning JTAG if configured. Closes #54 .
2014-08-27 19:03:37 +12:00
8a32b46f65
Fix build for non-native targets.
2014-08-08 20:22:33 +12:00
84fc40085e
Send a null packet on end of USB transfer if last data packet is full.
2014-08-06 12:38:57 +12:00
d265b76001
Add support for STM32F401RE
2014-08-06 10:49:48 +12:00
d7c30caa3e
Style clean up.
2014-07-30 21:15:43 +12:00
f06bc0fd79
Minor fixes to stm32f1 flash routines.
2014-07-30 20:27:30 +12:00
fad6eb3c14
Fix parity support on USB UART interface.
2014-07-30 19:57:18 +12:00
2b61bed291
Merge branch 'nrf51-uicr' of https://github.com/richardeoin/blackmagic into richardeoin-nrf51-uicr
...
Conflicts:
src/nrf51.c
2014-07-30 16:55:02 +12:00
4447fb428a
Merge pull request #50 from richardeoin/nrf51-ficr
...
Added monitor commands for reading various nRF51 device parameters
2014-07-30 16:51:46 +12:00
936b7460e0
Merge branch 'John-Titor-lpc11xx-flash'
2014-07-30 16:48:56 +12:00
3daf5d7e11
Merge branch 'lpc11xx-flash' of https://github.com/John-Titor/blackmagic into John-Titor-lpc11xx-flash
...
Conflicts:
src/lpc11xx.c
2014-07-30 16:45:55 +12:00
bfe5d1168b
Merge pull request #47 from richardeoin/target-power
...
Added monitor option to toggle target power
2014-07-30 14:19:46 +12:00
7e396b0205
Merge pull request #30 from BuFran/pulls/l152c
...
[SUP] Add support for stm32l152c-discovery board
2014-07-30 14:17:51 +12:00
5d61575ce6
Merge remote-tracking branch 'origin/lpc8xx'
...
Conflicts:
src/lpc11xx.c
2014-07-30 14:11:10 +12:00
88a80e25d5
[SUP] Add support for stm32l152c-discovery board
2014-07-09 16:35:33 +02:00
7dc18768c4
Support erasing + flashing the User Information Configuration Registers (UICRs)
2014-06-11 13:43:59 +01:00
380f128d0a
Added monitor commands for reading various nRF51 device parameters
2014-06-11 13:39:06 +01:00
none
3543e560af
Fix lpc11xx magic number programming when chunks overlap
...
In the case where the vectors are in a separate section smaller than
the chunksize, the lpc11xx magic number calculation could generate an
incorrect value.
2014-06-10 21:23:17 -07:00
c1b1d45155
TRST only exists on hardware version 0
2014-05-28 12:45:21 +01:00
42e41edfa1
Target power option is only for versions > 0
2014-05-28 12:33:43 +01:00
c9089f5851
Added monitor option to toggle target power
2014-05-28 12:25:48 +01:00
63bce97cbd
PLATFORM_FATAL_ERRORs are now caught even when they happen in the
...
initial JTAG scan that occours during platform_init.
Previously any fatal errors that occoured during this scan caused a
hardfault.
2014-05-28 12:10:26 +01:00
72ae78a185
Updated libopencm3. Fixes broken bootloader, issue #43 .
2014-05-08 11:02:35 -07:00
34d0f64529
Nordic nRF51 series support
2014-05-01 15:09:59 +01:00
3077472620
Unwind hardfaults in dual-stack mode.
2014-03-31 20:58:06 +13:00
096e1b32c6
Add support for LPC11U14 (tested) and related U-series microcontrollers (untested).
2014-03-08 19:07:50 +13:00
cbb85b6a45
LPC812 support
2014-03-08 18:58:39 +13:00
12aeaad441
[locm3] Use the new clock-enabling mechanisms in locm3.
2014-02-13 18:21:16 +01:00
690e99c6b2
Fix the STK_CTRL to the STK_CSR library change.
2014-02-13 17:52:09 +01:00
e5624a7e6d
Added support for the LPC1115FBD48/303 (ID determined experimentally)
2014-01-29 08:02:04 +08:00
d27c50c601
Add STM32F03X and STM32F07X handling.
2014-01-24 05:03:38 +08:00
0c9d5d8166
Add dfu bootloader update application and use absolute delay for stlink
...
Hello,
appended 3 patches
- adds a dfu-bootloader appliaction
- uses absolute delays when waiting for pull-up delays on the STLINK
(hopefully fixes issue #30 )
Updating the dfu-bootloader by additional application is helpfull for the
STLINK, as for flashing the bootloader by SWDb otherwise jumpers need to be
soldered or external SWD is not possible.
Use like:
- dfu-util -s 0x08002000:leave -D dfu_upgrade.bin
- dfu-util -s 0x08000000:leave -D blackmagic_dfu.bin
- Push reset buttom and reconnect to enter new dfu bootloader
- dfu-util -s 0x08002000:leave -D blackmagic.bin
--
Uwe Bonnes bon@elektron.ikp.physik.tu-darmstadt.de
Institut fuer Kernphysik Schlossgartenstrasse 9 64289 Darmstadt
--------- Tel. 06151 162516 -------- Fax. 06151 164321 ----------
>From fae5022c304a8866f056ea66660ac7ce3809dcf8 Mon Sep 17 00:00:00 2001
From: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de>
Date: Sun, 20 Oct 2013 15:00:36 +0200
Subject: F1: Prepare to update dfu bootloader via DFU with additional
application.
2014-01-24 04:59:09 +08:00
ac0fc8216a
Merge pull request #35 from burgrp/upstream
...
Fix in checksum calculation condition
2014-01-23 10:52:09 -08:00
eb2f2afa9a
Merge pull request #32 from aibara/lpc43xx_updates
...
Lpc43xx target support updates
2014-01-23 10:51:46 -08:00
ce17cc2e2b
Fix in checksum calculation condition
2014-01-22 10:35:35 +01:00
01244fc84d
LPC43XX: Force target to use internal clock.
...
Without this, flash write timing might be incorrect.
2014-01-10 13:24:25 -08:00
2b798fa8fc
LPC43XX: Make the chunk_offset logic more explicit.
2014-01-10 13:24:25 -08:00
487252150f
LPC: Cleanup regs_size (in bytes).
...
Also use sizeof() to make it clear why we multiple and divide by 4.
2014-01-10 13:24:25 -08:00
df9c19f071
LPC43XX: Remove type cast for erase function
2014-01-10 13:24:25 -08:00
911af3b836
LPC43XX: Add reset command to do a system reset (but not the debug).
2014-01-10 13:24:25 -08:00
813622b1b6
LPC43XX: Add mkboot target command; dont make banks bootable by default.
...
This used to be done transparently in the write step, however that
breaks the 'verify' command. This is also more flexible for cases
where you want to write a flash bank without ever intending it to
be bootable.
2014-01-10 13:24:25 -08:00
29c7846612
LPC43XX: Make sure to align target struct to word alignment
2014-01-10 13:24:25 -08:00
8014d434de
Update to the newest libopencm3
2014-01-04 17:29:54 +01:00
8835df1822
Merge remote-tracking branch 'origin/usbuart_highrate'
2013-12-04 16:16:08 +13:00
42570efaf8
Revert "STM32F4: Add handling of second bank and dual boot devices."
...
This reverts commit 536482f804
2013-10-22 07:48:06 +08:00
09fbe783c5
f4discovery: Limit clock to 48 MHz and stack 24 kiByte so that code can be compiled unchanged for F401Discovery too.
...
TODO: Bump clk up to 84 MHz as soon as libopencm3 supports that speed.
2013-10-22 07:26:35 +08:00
536482f804
STM32F4: Add handling of second bank and dual boot devices.
2013-10-22 07:21:35 +08:00
cbd73cfb8f
STM32F4: Recognize F401.
2013-10-22 07:21:35 +08:00
5aa802969b
stlink: Give the NRST check more time as otherwise some L1 discovery board stayed in the bootloader.
2013-10-22 07:18:09 +08:00
086f3565f0
stm32f1: Fix handling of option byte write. Write needs to happend on erased option bytes.
2013-10-20 16:14:25 +02:00
15e529a43a
stm32f1.c: On a read protected device, deny any other option action than erase.
...
Otherwise the first option action triggers an error, inhibiting further option
actions.
2013-10-20 16:14:19 +02:00
c395c6f73a
Configure SRST output as open-drain for BMP Mini hardware
2013-10-05 13:14:03 +08:00
3cce6f472c
Add support for the SYS_WRITEC semihosting operation.
...
This is implemented in the same manner as QEMU semihosting
support, specifically, a SYS_WRITEC results in a single
character write to STDERR.
2013-10-05 13:14:03 +08:00
b8f9a2ed4b
Bugfix: Always apply the vector table magic number correctly.
...
Previously when the flash write length was less than the Chunk size the 2nd chunk write would re-calculate and apply an incorrect magic number
2013-10-05 13:14:03 +08:00
40820a2354
Added internal pull-up to PWR_BR.
...
o Prevent probe from inadvertently powering target. If PWR_BR is
allowed to float, the gate on Q1 (blackmagic_mini) will tend to be
close enough to zero to turn the transistor on. We activate the
internal pull-up on this IO pin to force the transistor off.
2013-10-05 13:14:03 +08:00
e67192348f
FIX: usbd_init compatibility fix
...
Updated compatibility with libopencm3 commit 113e5c22e6390ba072148315e83a5faa5ff7ce86
2013-10-05 12:23:23 +08:00
c857165c12
FIX: FLASH_* collision with libopencm3 definitions
...
Resolve collision to FLASH_* from the libopencm3 by adding STM32F1_ prefix to the L1's
2013-10-05 12:23:23 +08:00
c28350f242
FIX: u{8,16,32} -> uint{8,16,32}_t to be compatible with new library
...
The use of u8, u16, u32 has been deprecated in libopencm3.
Update it with standard uint8_t, uint16_t, uint32_t types
2013-10-05 12:23:23 +08:00
f1584b266b
[BUILD] Don't throw error on already cleaned output
2013-10-05 12:23:23 +08:00
700833f38f
Use do {...} while(0) for PLATFORM_FATAL_ERROR() macro.
2013-08-19 12:27:36 +12:00
a30ef31018
Handle SW-DP fault on WDATAERR.
2013-06-19 21:06:59 +12:00
d8f737fc53
Disable ADIv5 timeout while target is running.
2013-06-19 21:05:53 +12:00
d90e10cdba
adiv5_swdp: avoid dead-loop with a sleeping target
...
A sleeping target continues to communicate over SWD properly but
consistently returns SWDP_ACK_WAIT.
It might be nice to be able to wait for the target to wake up on its
own but if it's not going to wake up, BMP becomes absolutely
unresponsive. Probably the timeout should be made configurable or some
other workaround invented.
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
2013-06-19 19:28:16 +12:00
27a86e244f
native: Enable hard SRST signal.
2013-06-19 19:21:49 +12:00
c05b7a1f63
Rename lpc11xx driver.
2013-06-17 16:06:03 +12:00
3caaa28fa1
Fix warning about implicit cast.
2013-06-17 15:57:13 +12:00
8c877d6dfa
Fix trailing whitespace everywhere.
2013-06-17 15:53:32 +12:00
2d63dd4b5b
Fix register array sizes.
2013-06-17 15:52:15 +12:00
df32aad757
semihosting: improve handling of console I/O
...
This implements special handling for SYS_OPEN to catch requests for
":tt" which is reserved by ARM for console input/output. They're
mapped to the appropriate GDB file descriptors automatically.
An additional file handle offset is introduced because ARM doesn't
consider zero handle to be valid.
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
2013-05-18 15:33:58 +12:00
5020d1f05d
Move semihosting support to cortexm.c.
...
Try to implement more syscalls.
2013-05-18 15:33:58 +12:00
aca421d0bb
Basic semihosting support
...
Implement bare minimum necessary to support console IO.
This works with standard newlib builds and is based on the reference
documentation:
http://infocenter.arm.com/help/topic/com.arm.doc.dui0471c/CHDJHHDI.html
Tested using gcc-arm-none-eabi-4_7-2013q1-20130313 for both
stm32f1-based BMP and stm32f0 target.
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
2013-05-18 15:33:58 +12:00
feaf626673
Add support for Atmel SAM3N devices.
2013-05-18 15:32:06 +12:00
cdaed128c1
stlink: add support for SRST handling
...
This enables SRST signals in open drain mode for both stlinkv1 and
stlinkv2 hardware platforms.
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
2013-05-14 12:34:53 +12:00
e0fc21a2a7
adiv5_swdp: allow to connect to a sleeping target by pulling SRST
...
This patch introduces a new command, "connect_srst [enable|disable]"
which allows to enable special mode in which SRST would be pulled low
before the SWD scan till attaching to a target.
Since on Cortex-Mx the SRST signal doesn't gate JTAG and SWD, it's
possible to connect to a target while holding reset, ask it to stop at
reset vector and only then deassert reset, thus allowing to attach to
the kind of firmware that goes immediately to sleep or disables
debugging by other means early on start.
Tested on an STM32VLDiscovery board with STM32F100 configured to go to
STOP mode and executing WFI in the very beginning of main().
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
2013-05-14 12:32:44 +12:00
510d1c0dc8
Add support for burning flash on lpc4337.
2013-05-14 12:25:13 +12:00
56f44c39d9
nxp: support the lpc1114dip28 by Rickta59
2013-04-27 20:57:20 -07:00
e3f3171a33
usbuart: Fix build error and clean up whitespace.
2013-04-27 13:14:22 -07:00
43f7e7a3cf
Changes to the USBUART to make it less likely to drop characters at higher baud rates.
...
USB UART seems to work fine at 115.2Kbps or 230.4Kbps, but starts to drop characters
as the data rate goes higher. This commit changes the usbuart ISR to fill a software
FIFO, and adds a low priority timer interrupt to run deferred processing to drain a
FIFO and send USB CDCACM packets, rather than calling the usb send within the UART
ISR.
Tested on native platform, up to 1.5MBps.
2013-04-27 12:56:58 -07:00
f1ea5ed8f9
F4Discovery: Slow Down GPIO access a little, as off-board SWD otherwise needs _very_ good ground connection.
2013-04-23 13:43:43 -07:00
ad151fdca8
F4 Discovery: - Unconditionally use the System Bootloader - Use PC2/4/5/6 Pins for JTAG/SWD to avoid collision with eventual STLink Uart connection - Indicate Bootloader with blue LED
2013-04-23 12:14:18 -07:00
6659d87e9b
Remove DFU bootloader self protection.
...
It can still be enabled by building with -DDFU_SELF_PROTECT
2013-04-16 16:54:52 -07:00
126df7bb35
Allow extra LDFLAGS on command line. Use nano.specs for swlink.
2013-04-16 16:47:38 -07:00
45e02360b7
native: Fix up deprecated warnings.
2013-04-16 12:47:29 -07:00
89b908337d
Add missing #includes
2013-04-16 12:36:19 -07:00
67a96410e3
libftdi: Clean up warnings.
2013-04-16 12:33:28 -07:00
da448ec1a6
libftdi: Add 'flossjtag' cable.
2013-04-16 12:14:37 -07:00
6b7babf624
stm32f4: Add option erase command
...
--
Uwe Bonnes bon@elektron.ikp.physik.tu-darmstadt.de
Institut fuer Kernphysik Schlossgartenstrasse 9 64289 Darmstadt
--------- Tel. 06151 162516 -------- Fax. 06151 164321 ----------
>From d488dffe4dab4e5188c750489006260745a9e25a Mon Sep 17 00:00:00 2001
From: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de>
Date: Mon, 15 Apr 2013 15:26:58 +0200
Subject: stm32f4: Add option erase command
2013-04-15 10:22:17 -07:00
9c95f039cf
Make code compatible with newlib-nano and use it for stlink
...
With gcc-arm-none-eabi-4_7-2013q1-20130313 and -O2 I get
text data bss dec hex filename
45744 304 2376 48424 bd28 blackmagic
With -Os the results are even more impressive:
text data bss dec hex filename
37900 304 2376 40580 9e84 blackmagic
Since -Os might lower the debugging speed, do not enable it yet in the
absence of real measurements.
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
2013-04-14 11:48:59 -07:00
91b481731d
stm32f1/stm32f4: fix hardware CRC calculation
...
This was real-life tested on stm32f1 hardware including computation
for odd-sized ranges.
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
2013-04-14 11:35:23 -07:00
7db6e3e00c
Revert "Revert "STM32: Use hardware CRC unit""
...
This reverts commit 58abbf7fc7
2013-04-14 11:28:46 -07:00
58abbf7fc7
Revert "STM32: Use hardware CRC unit"
...
This reverts commit 32b909067b
2013-04-04 21:37:51 -07:00
61d464bf09
dfu: Fix warnings.
2013-04-04 20:16:13 -07:00
d4411fc51f
Removed verison info from USB strings on native platform.
2013-03-31 12:18:11 -07:00
3a70b81cce
Add erase_mass command for stm32f4 devices.
2013-03-27 14:10:07 -07:00
d7a6f0165e
Accept new chip ID for stm32f4 and include flash layout for 2MiB parts.
...
Thanks to Mike Smith.
2013-03-27 11:24:43 -07:00
87dad080e1
Fix build for f4discovery host.
2013-03-17 10:17:05 +13:00
931cd97f15
Removed stm32_can and usps_f407 platforms.
2013-03-15 20:50:55 +13:00
486c5de013
swlink: Add missing item to connector layout
2013-03-14 22:56:31 +01:00
920ced062e
SWLINK: Add variant for the STM8S Discovery board
2013-03-12 12:24:10 +01:00
e880c553fb
Restore trace timer interrupt handler.
2013-03-12 19:14:11 +13:00
7c2e994381
Split out platform specific bootloader parts to separate files.
2013-03-12 19:04:10 +13:00
55f161208d
Further split-up of DFU bootloader.
2013-03-12 15:00:15 +13:00
14e5e8b0b6
Separated clean and dirty bootloader sections.
2013-03-12 09:57:28 +13:00
e8f9d52d2f
gdb_if: Fix USB flow control.
...
The introduction of the double buffering broke USB flow control, causing
loss of data when a new packet arrived with the previous still present in
the double buffer.
With this patch the endpoint is kept in NAK until the double buffer is empty.
2013-03-06 20:36:49 +01:00
d5be7b7a50
Merge pull request #11 from aibara/master
...
Another small fix for adiv5, ap_mem_write_bytes double increment analogous to previous fix for ap_mem_read_bytes
2013-02-18 00:51:45 -08:00
99ac73907f
Merge pull request #9 from jeffstaley/master
...
Bug fixes for lpc11xx code
2013-02-18 00:50:50 -08:00
ff8de39774
usbuart: Don't try to send until configured. Enumeration may hang else
2013-02-15 17:55:36 +01:00
dee82a0d4f
Document changes between ST-Link V1 and V2 and implement needed changes
2013-02-15 17:39:27 +01:00
f8ea954275
STLINK: Add pointer to Discoveryboard modification instructions
2013-02-11 19:36:22 +01:00
327ee49a67
usps_f407: add another platform
2013-02-03 14:22:14 +01:00
31f39339fd
stm32/usbdfu.c: Rearrange code to clarify the tasks to be done
2013-02-03 14:14:48 +01:00
4d6ae0a1b2
Avoid double increment of dst in adiv5 write bytes function.
2013-01-31 13:39:41 -08:00
b1a942aca3
STM32F0/3: Handle the option bytes
2013-01-30 17:16:44 +01:00
9819f9d5b3
Corrected the led pin for F3 and F4 discovery boards. Needs proper fixing so that it works on all platforms in the future.
2013-01-28 12:15:50 -08:00
b50b3ffa86
Error in calculating ending sector number.
2013-01-26 11:38:27 +08:00
96ae3886ff
stm32:cdcacm/usbdfu: Print version and build information in the product string
2013-01-25 13:01:57 +01:00
8415fc829b
stm32/cdcacm.c: remove unneeded includes
2013-01-23 17:28:34 +01:00
32b909067b
STM32: Use hardware CRC unit
2013-01-23 16:11:17 +01:00
d868088d78
STM32L1: Add to the list of known JTAG IDs
2013-01-23 00:16:01 +01:00
6157754201
libftdi: List some know cables and allow to specify cable and serial
2013-01-23 00:16:01 +01:00
ce059cc8ed
LIBFTDI: Propagate the command line arguments to platform_init
2013-01-23 00:15:47 +01:00
73d120577b
usbdfu: Write protect the bootloader sector on F4
2013-01-22 19:04:51 +01:00
09e2d00b8e
STM32F4: Add option byte handling
2013-01-22 18:49:11 +01:00
0a91fc3b30
Updated stlink platform to the new locm3 usb api.
2013-01-21 13:43:37 -08:00
747cc58c2c
STLINK: Unconditionally enable MCO from 8 MHz HSE to PA8 as on original firmware. F3 Discovery has has no quarz for the F3 and needs it.
2013-01-21 12:48:37 +01:00
8033fb2529
STLINK: Allow to force bootloader by starting with the RESET button pressed
2013-01-21 11:02:44 +01:00
749fb318e7
gdb_if: Use a doubled buffer scheme for reading data from USB
...
Needed, as the OTG driver erases the data read after eventually calling the callback
2013-01-21 11:02:44 +01:00
1fa961841d
Product and DFU String now tell the hardware they run on
2013-01-21 11:02:44 +01:00
04624af4e5
f4discovery: Adapt from the "native" file and add or change code where needed
...
- stm32_mem.py has problems with erasing the big pages, but dfu-util works
- serial GDB remote server doesn't work. It neither works for the STM32F107,
so maybe there is a problem with the usbd_f107_driver.
2013-01-21 11:02:44 +01:00
e373619374
stlink: LED is connected to GPIO9. Before LED was associated with the MCO Output.
2013-01-21 11:02:44 +01:00
8b1ec3151f
usbuart, jtagtap, swdptap: Factor out GPIO setup
2013-01-21 11:02:44 +01:00
7e91f68efa
f4discovery: Create a platforms directory for the F4 on the F4 Discovery board
2013-01-21 11:02:44 +01:00
15d7077115
traceswo: Move (now-constant) traceswo.c to platforms/stm32
2013-01-21 11:02:44 +01:00
09715e1db8
traceswo: factor out platform dependant parts
2013-01-21 11:02:44 +01:00
72ca77af53
stm32_can: Changes to get blackmagic to work
2013-01-21 11:02:44 +01:00
313a24b316
usbdfu: Allow for different, but constant flash page sizes
2013-01-21 11:02:43 +01:00
1eb9bfc650
platforms/stm32: Move more platform dependencies to platform.h
2013-01-21 11:02:43 +01:00
30d8aa1eb7
Move (now-constant) cdcacm.c to platforms/stm32
2013-01-21 11:02:43 +01:00
04415582bd
cdcacm: move non-constant parts to platform.[hc]
2013-01-21 11:02:43 +01:00
533608a2f4
Move usbuart to the stm32 directory
2013-01-21 11:02:43 +01:00
16ac8e0478
stlink: Add DFU capability
2013-01-21 11:02:43 +01:00
7188a4a8cb
Move usbdfu to platforms/stm32 directory
2013-01-21 11:02:43 +01:00
67f8176c5b
stlink: Add the UART
2013-01-21 11:02:43 +01:00
35d6adc236
native/usbuart: Move platform dependant parts to platform.h
2013-01-21 11:02:43 +01:00
16b9c1e83f
stlink: Update to current libopencm3 usb api.
2013-01-21 11:02:43 +01:00
Marc Singer
Gareth McMullin
David Lawrence
Benjamin Vernoux
Martin Knoll
Richard Meadows
Uwe Bonnes
Fredrik Ahlberg
Vegard Storheil Eriksen
Allen Ibara
Hans Baier
Frantisek Burian
none
Mike
Jared Boone
Pavel Burgr
Gareth McMullin
Michael Tharp
Benno Leslie
Paul Fertser
Allen Ibara
Piotr Esden-Tempski
mirage