baab2e6119
Attempt to fix SWIG issue.
2021-08-23 22:04:31 +01:00
21f2b235ce
Rework stackup colors a bit to support opacity for 3D viewer.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9012
2021-08-23 20:00:17 +01:00
fec34e8dd8
Get rid of an extraneous layer parameter.
...
Also adds a bit of nullptr safety.
2021-08-23 20:00:17 +01:00
6f5e602df9
Fix solder mask plotting issues.
...
1) Don't plot all footprint texts for each footprint graphic item.
2) Correctly handle multi-layer zones.
2021-08-23 20:00:17 +01:00
9770962ab4
Fix logic bug in rule processing.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9011
2021-08-22 20:16:58 +01:00
1fa5e43597
Fix some dodgy logic in clearance overrides.
2021-08-22 03:24:51 +01:00
b9ffe2aca8
Don't capture stack-defined lambdas by reference.
2021-08-21 22:49:57 +01:00
3b3cb88ad9
Remove shadowed variable in lambda
2021-08-21 14:01:20 -07:00
eb85af3366
Don't capture references to local stack variables.
2021-08-21 21:40:17 +01:00
1fd555ce0e
Added code to map footprint lib nicknames when exporting.
...
This is particularly useful when you import (for instance) an
Altium board and then save the footprints out to a new library.
Fixes https://gitlab.com/kicad/code/kicad/issues/6345
2021-08-21 19:00:59 +01:00
3efa391eb2
Attempt to prevent control hiding problems on GTK
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8902
2021-08-21 13:37:07 -04:00
09ea630d8e
Don't log a potentially invalidated item
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9006
2021-08-21 12:24:41 -04:00
0814219513
Clean up some handling of project files in standalone
...
Add control of project creation to Eeschema; change defaults
to enable project creation in both programs. Properly set
project on newly-created schematics so "Save As" doesn't
get triggered repeatedly.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9000
2021-08-21 12:09:21 -04:00
3e57700b21
Process rules in "natural" order using overrides.
...
(We used to process in reverse order with first-match-wins, but
that doesn't allow min, max and opt to come from different rules.)
Fixes https://gitlab.com/kicad/code/kicad/issues/9004
2021-08-21 16:43:11 +01:00
048e13f423
Defer DRC rule function eval to make use of short-circuit bools.
...
The lemon parser doesn't lend itself to short-circuiting booleans,
but if we defer processing until we fetch the second value when
processing the TR_OP_BOOLEAN opcode then we get to piggy-back on
C++'s boolean short-circuiting.
2021-08-21 16:43:11 +01:00
1e23ce1c95
Pull some fixes back from 7.0.
...
1) An earlier 6.0 fix to apply pad clearance overrides to NPTH pads
got broken, so this replaces it.
2) Allow min/max/opt to be set by different rules.
3) Fixes a bug where board minimum enforcement over a local override
didn't get the right message text.
2021-08-21 16:43:11 +01:00
71b7816de5
DIALOG_GEN_FOOTPRINT_POSITION and dialogs print: minor enhancements:
...
Gen footprint: 2 options are now stored during a session.
Gerbview and Pcbnew dialogs print: avoid useless large size of right panel.
2021-08-21 11:06:00 +02:00
7ea4d4da85
Fix errant tabs
2021-08-20 17:24:05 -07:00
d9c7fdc28e
Pcbnew add SMD only option to component placement export
...
Add option to only use footprints flagged as SMD
when creating a componenet placement files.
Signed-off-by: Dominik Sliwa <dominik@sliwa.io>
2021-08-20 17:24:05 -07:00
db5ce824af
Use wildcard routine for extension matching
...
Move STEP export dialog wildcard to extension matching
2021-08-20 17:24:05 -07:00
4cd9278041
Remove most wxFilepicker wildcards from translations
...
This prevents translation errors from preventing user actions such as
opening the correct file
2021-08-20 12:56:47 -07:00
c80efb0f98
Fix save/load of appearance panel width on show/hide
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8982
2021-08-19 21:15:14 -04:00
46b959c3e3
Move plotter headers into include folder.
2021-08-18 16:38:31 -04:00
5574682d44
Fp editor: minor fixes:
...
- do not show the paste special context menu: it has no sense in this editor
- Paste command: fix incorrect rotation of pasted FP texts
2021-08-18 17:43:10 +02:00
82849eda42
Fp editor: fix some crashes when trying to duplicate referece or value texts.
...
Fixes #8990
https://gitlab.com/kicad/code/kicad/issues/8990
2021-08-18 15:34:32 +02:00
6427197962
Remove duplicate headers in plot and associated code.
2021-08-17 15:41:25 -04:00
9ae9301b46
Fix shadowed variable.
2021-08-17 12:54:14 -04:00
8b5f393804
DRC bug fixes and debugging improvements.
...
1) Don't wait for UpdateUserInterface to build the (global) list of
layer names.
2) Report clearance resolution between a silk layer and a mask layer.
3) When writing DRC reports, include info about the violating rule.
4) Report "no relevant layers" if we fail to find anything to write
a clearance resolution report about.
Fixes https://gitlab.com/kicad/code/kicad/issues/8963
2021-08-17 15:41:12 +01:00
a133853a4f
Fix typo in DRC error link.
2021-08-16 20:05:35 +01:00
ca42f31bb5
Pcbnew, update footprint: fix loss of net info in some cases.
...
When pads having a similar name but some were not on a copper layer
(aperture pads) the net info update from old footprint to the new footprint
was incorrectly transferred. Now, only pads on copper layers are considered.
Fixes #8979
https://gitlab.com/kicad/code/kicad/issues/8979
2021-08-16 20:52:49 +02:00
da3fda8dee
Fix typo in non-copper zone fill pattern, and cleanup spacing.
...
Also makes better use of UNIT_BINDER and fixes some other naming
inconsistencies with copper zone dialog.
2021-08-16 13:24:12 +01:00
1a252b4f96
Add a compile error for ill-defined rules, and more performance.
...
Also adds const-safety to GetBoard().
2021-08-16 12:14:17 +01:00
f0c957a2e2
Enable LAYER_MOD_TEXT_FR layer in fp editor as it should.
...
It also fixes a crash when changing visibility of other fp texts..
2021-08-16 09:30:54 +02:00
f34e280c81
Garden-variety 100X performance improvement.
...
Adds a compile mode for layer strings.
2021-08-15 22:24:51 +01:00
eaccbce48b
Fix logic errors in progress reporting in a couple of DRC providers.
2021-08-15 22:24:44 +01:00
1ec70d30af
Cherry-pick some 7.0 Clearance Resolution improvements.
...
6.0 will be in the field for a long time, and the better the debugging
tools we have available the less costly it will be to maintain.
Fixes https://gitlab.com/kicad/code/kicad/issues/8961
2021-08-15 19:03:58 +01:00
48521774cd
Formatting.
2021-08-14 21:18:11 +01:00
41619ebbe2
Decouple PROGRESS_REPORTER interface from implementations.
2021-08-14 21:05:49 +01:00
8ac5e318fb
Ugly hack to avoid crash on msys2 when running Pcbnew after running Eeschema+its Python console
...
The main bug still exists, but at least Kicad does not crash.
2021-08-14 21:08:56 +02:00
8eba0b356b
Fix issues calling SaveBoard on board loaded from PcbNew frame
...
KiCad cannot have more than one board/project open, so disallow
the Python APIs for loading additional boards when the frame is
present. Inherit the SETTINGS_MANAGER from the frame when present
instead of creating a new one that won't have the loaded project.
2021-08-14 09:18:21 -04:00
bff247b08a
Hook up 3D viewer colors to board stackup.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/5173
2021-08-14 14:00:17 +01:00
05fb582304
Expose missing annular ring properties in Track & Via Properties.
2021-08-14 10:49:42 +01:00
3d61c8b0c4
PANEL_SETUP_BOARD_STACKUP: Do not limit the EpsilonR mantissa to 1 or 2 digits.
...
Fixes #8956
https://gitlab.com/kicad/code/kicad/issues/8956
2021-08-14 09:42:05 +02:00
80355f04a9
Fix SHAPE_LINE_CHAIN::Replace at end of chain
2021-08-13 16:59:45 -04:00
e5586fb974
Accept legacy hole token as well as new hole_size.
2021-08-13 21:28:11 +01:00
d34e9e8946
Code safety.
2021-08-13 21:28:11 +01:00
35d5223825
Keep track of existing/excluded references when re-annotating the PCB
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8211
2021-08-13 19:09:37 +01:00
aa67abb681
PNS::NODE Use PointCount instead of calculating segment index manually
...
There is no need to manually calculate the segment index - we know
that the last point that was added is the start point of the segment.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8945
2021-08-13 19:09:33 +01:00
4c3954aea8
Clearer DRC rule token name for hole_size.
2021-08-13 16:18:56 +01:00
3b26db745f
Use more standard terminology.
2021-08-13 15:18:47 +01:00
5bfafa5e4c
Add rounding epsilon to convert tool polygon search
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8927
2021-08-12 20:17:04 -04:00
98d0ce00ee
Defensive coding.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8790
2021-08-12 21:35:05 +01:00
02e7d9f809
pcbnew: swap x/y align text to match vertical/horizontal text on right click...
2021-08-12 13:03:52 +00:00
f4a7565b9c
fix a compil warning
2021-08-11 08:16:26 +02:00
13fc16b03f
Fix uninitialized variable.
2021-08-10 16:51:30 +01:00
c536a4c4f2
Work around annoying wxWidgets assert.
2021-08-10 16:51:30 +01:00
a208dac8d8
Convert hole clearance tests from NPTH holes to all holes.
2021-08-09 22:26:00 +01:00
0120c5fa4b
PNS Length Tuning: Recover original arc tracks after tuning
2021-08-09 21:10:33 +01:00
69322a18e7
Fix missing call to ClearArcs()
2021-08-09 09:16:04 +02:00
a90656900a
Allow creating polygon types from polygons
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7302
2021-08-08 20:29:00 -04:00
e91218b876
PNS: don't mark holes only if there's also a solid violation
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8874
2021-08-08 15:41:39 -04:00
3beeb52c43
Convert tool: create lines on active layer, not source layer
2021-08-08 15:12:23 -04:00
2d9b06cbf9
Fix missing flatten step when filling zones with arcs
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8923
2021-08-08 15:09:12 -04:00
54942a1401
Fix typos that would result in fp zone setting written into pads.
2021-08-08 18:12:29 +01:00
e38c366695
Narrow zone dialog a bit.
2021-08-08 18:12:29 +01:00
fa82fcb809
Router tool: ensure a internal layer exists when placing a microvia.
...
Fix also a minor compil warning.
Fixes #8931
https://gitlab.com/kicad/code/kicad/issues/8931
2021-08-07 20:29:49 +02:00
bafa105ed0
Enforce hole clearance on NPTHs in zones.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8924
2021-08-06 18:16:38 +01:00
a10f2b284c
Unify negative zero and percent handling in UNIT_BINDER.
...
Some values, such as solder mask margins, are usually negative and it
helps to display zero as "-0.0".
2021-08-06 18:16:38 +01:00
e81b7b4a14
Give a few dialogs a bit of love.
...
1) improve spacing in copper zone properties.
2) improve spacing and naming in dielectric material properties.
3) clearer naming in board setup > constraints.
4) remove over-exuberant stretching in board setup > mask & paste.
2021-08-06 18:16:38 +01:00
6a9a177fa3
Remove zone filler arc collision workaround
2021-08-05 17:45:12 +01:00
77680eba30
Naming conventions.
2021-08-05 14:31:36 +01:00
5bf0b99813
Capture errant mouse-up from locked dialog in move tool.
...
Don't pass it on to other tools where it causes all kinds of mayhem.
Fixes https://gitlab.com/kicad/code/kicad/issues/7255
2021-08-04 17:42:40 +01:00
76bdb423d7
Minor changes: minor code cleanup and fix minor Coverity warning
2021-08-04 16:47:41 +02:00
ae99e627bd
Quiet Coverity.
2021-08-04 13:55:42 +01:00
46bdce2747
Don't allow pads in groups in the board editor.
...
Bad stuff happens, including crashes.
2021-08-04 13:55:42 +01:00
65f6e72b4c
Improve commenting.
2021-08-04 13:55:42 +01:00
ac933d4e83
Fp editor: avoid having nil uuids when editing old footprints.
...
In Fpeditor, nil uuid has a special meaning and cannot be used as uuid in fp items.
Fixes #8914
https://gitlab.com/kicad/code/kicad/issues/8914
2021-08-04 12:37:52 +02:00
c5e195bdff
Cleanup (includes and formatting).
2021-08-03 18:37:23 +01:00
95b87ba29a
Freshen microwave polygon dialog and remove a bunch of dead code.
2021-08-03 01:11:11 +01:00
43523df843
Measure distance from pad center, not pad hull.
...
Otherwise we think the wrong end of really short track segments is
connected to the pad, leaving the other end dangling.
Fixes https://gitlab.com/kicad/code/kicad/issues/8909
2021-08-02 22:42:54 +01:00
8b9161b27d
Be more careful with alpha value.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8850
2021-08-02 18:24:16 +01:00
6f1837b300
Formatting.
2021-08-02 01:52:58 +01:00
c51b1dad72
Generalize infobar MESSAGE_TYPE handling and use for DRC errors.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8782
2021-08-01 21:51:39 +01:00
0d539a84a2
Fix bugs in Tracks Cleaner.
...
1) Implement more robust connection checking so we don't decide very
short segments with both endpoints within a single track are connected
at both ends.
2) Make use of the IS_DELETED flag to perform iteration during dryRun
so that all deletions to be made are flagged.
Fixes https://gitlab.com/kicad/code/kicad/issues/8883
2021-08-01 15:50:01 +01:00
b573712326
Cleanup.
2021-08-01 15:37:12 +01:00
0f5a8f87d3
Add writing of pad primitive polys with arcs, and fix a bug in reading.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8827
2021-08-01 10:47:00 +01:00
faa1ff4ec6
Add false-negative DRC tests (and fix first bug found by them).
2021-07-31 16:41:44 +01:00
7b4dcb6e10
Refactor ExportSpecctraFile to be usable in API
...
Currently there is pcbnew.ExportSpecctraDSN() but it needs a pcbnew
frame set which makes it unusable outside of the scripting window or a
plugin.
This refactors actual exporting logic into separate helper and adds an
overload to ExportSpecctraDSN(board, filename) that doesn't need pcbnew
window.
2021-07-31 09:55:48 +00:00
6cd4d68d57
Add drop shadows to MacOS icons
...
Apple UI guidelines ask for small drop shadows on the icons. We add
these using ImageMagick when resizing
2021-07-30 20:55:34 -07:00
e7d8b1a975
Resize MacOS icons and script their creation
...
Creates a script that will fomat the MacOS icons at 80% of the total
size in line with Apple's guidelines.
Script requires Inkscape 1.0 and png2icns (available on Linux boxen)
Fixes https://gitlab.com/kicad/code/kicad/issues/7977
2021-07-30 20:28:14 -07:00
ad8acd328c
Expunge some remaining references to kicad-pcb
2021-07-30 20:27:45 -07:00
bceb3794f8
Remove ZONE_FILLER_TOOL since it's not really necessary.
...
It was causing intermittent failures on GTK. We'll no doubt want
tools in the QA framework at some point, but probably not necessary
for 6.0....
2021-07-31 01:50:42 +01:00
8c69a856fc
Add zone filler tests.
...
One test has pads of a bunch of different shapes and provokes some
errors to make sure they're caught.
The others are all past issues with the zone filler to make sure we
don't suffer any regressions. (They should all just pass with no DRC
errors.)
2021-07-30 17:09:24 +01:00
8aea2cbd03
When ignoring click events don't ignore synthetic ones.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7255
2021-07-29 18:07:04 +01:00
138a965c2a
Remove shadowing member variable.
...
Perhaps the compiler always gets this right, but it's still confusing
when reading the code.
2021-07-29 16:03:25 +01:00
9271ac1a4f
Don't allow deletion of pads when not in allow-free-pads mode.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8884
2021-07-29 16:03:25 +01:00
6aaf4413b3
Fix kicad_string.h / string.cpp mismatch.
...
They don't define a KiCad string class, so the header file name was
somewhat misleading. But the fact that they didn't match definitely
made coding more difficult.
2021-07-29 16:03:25 +01:00
f221220fe2
Rename layer ids file.
...
It hasn't had anything to do with colors or visibility for some time
now.
2021-07-29 16:03:25 +01:00
46338403e7
Unwrap some std::library typedefs.
2021-07-28 22:16:38 +01:00
befd30a1a1
Switch the board footprint properties window to use the new 3d models panel
...
This allows it to also get the badge showing errors in the panel.
2021-07-28 20:56:17 +01:00
1a4a3400ba
Split the footprint 3d model panel into its own class
...
This allows it to be shared by both the PCB editor properties dialog
and the fpeditor dialog.
2021-07-28 20:56:17 +01:00
f233f4a0a9
Expunge EDA_FILE_SELECTOR.
...
EDA_FILE_SELECTOR was just an obfuscation of wxFileSelector().
2021-07-28 14:12:51 -04:00
b6e1fe11b6
Fix a collision name (perhaps msys2 specific)
2021-07-28 19:39:50 +02:00
36d66085f5
Add a column showing 3D model file loading errors
...
This adds an icon to the left of the row with an error symbol if the
file can't be found or opened, and shows a tooltip over the icon with
and error string.
Fixes https://gitlab.com/kicad/code/kicad/issues/3815
2021-07-28 16:42:22 +01:00
c0f12cf8b0
PCB painter: skip early to polygon algo in outline mode
2021-07-28 10:37:56 +00:00
369d813a32
Pass std::string by reference instead of on the stack where applicable.
2021-07-27 13:30:05 -04:00
1f2e7a94ca
Change Move Exactly hotkey to Shift + M to avoid OSX minimize.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8864
2021-07-27 18:20:32 +01:00
dd5676f4bc
Implement a safer (RAII) tool re-entrancy guard.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8873
2021-07-27 16:37:34 +01:00
886dc2f43e
Do-not-show-again section for common prefs & zone fill warning infobar.
...
Note that the dialogs which have mutliple options were not moved over
as it seems perahps not the right choice to have them save state between
sessions.
Fixes https://gitlab.com/kicad/code/kicad/issues/8762
2021-07-27 15:15:49 +01:00
c74148fa88
Add infobar for those who confuse zone filling with display modes.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8762
2021-07-27 15:15:49 +01:00
37b200cb3e
Pass wxString objects by reference instead of on the stack.
2021-07-27 08:41:27 -04:00
78e5e98ea0
Pass VECTOR2I objects by reference instead of on the stack.
2021-07-27 08:41:27 -04:00
c946070005
Fix TRACKs not being cast correctly in API
2021-07-26 22:37:22 +00:00
8fd83cbb95
Pass wxPoint objects by reference instead of on the stack.
2021-07-26 15:35:33 -04:00
e62969d007
Move zone fracture display mode to AdvancedCfg, and add triangulation.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8762
2021-07-26 18:57:35 +01:00
89b1fdabe9
Pass COLOR4D object by reference instead of on the stack.
2021-07-26 13:28:56 -04:00
cb917e4c42
Avoid nonsensical intersections
...
When two segments are approximately parallel, we shouldn't look to find
their intersection. It will never be the nearest point and it overflows
the KiROUND call
Fixes https://gitlab.com/kicad/code/kicad/issues/8858
2021-07-26 09:02:54 -07:00
d613292b67
Fix type in group command enablement.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8821
2021-07-25 13:31:52 +01:00
39e938db3e
Save the show-page-limits setting.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8825
2021-07-25 13:29:16 +01:00
42086a455d
fix blind via early return in VRML exporter
2021-07-25 12:22:55 +00:00
373f0335c8
Convert Altium radial dimensions to leaders.
...
This is because we don't yet support radial dimensions.
Also fixes a bug where we fail to read an Altium circular track. We
now convert it to a pair of 180-degree arcs.
Also fixes a bug where we were failing to import prefixes on linear
dimensions.
Fixes https://gitlab.com/kicad/code/kicad/issues/8789
2021-07-24 14:25:59 +01:00
531f5480a7
Reduce line-breaks and increase SNR.
2021-07-24 14:25:59 +01:00
dd31a5383b
Added the double click to footprint editor
2021-07-24 08:53:09 +00:00
31d2b2df8b
QA test: fix a wx assert about Locale when running qa_python tests.
...
Probably happens only when the system locale uses a comma as fp separator.
2021-07-23 11:45:45 +02:00
04b9b15255
Fix copy/paste error.
2021-07-23 01:11:22 +01:00
8d1dd1f8b0
Handle pad->custom conversion more closely
...
When converting pads to custom polygons, avoid padding with the polygon
width and keep the anchor pad within the boundary of the original pad
itself
Fixes https://gitlab.com/kicad/code/kicad/issues/8842
2021-07-22 12:12:42 -07:00
a16b85db67
Read/write group locked state. Show locked state in dialog & statusbar.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8796
2021-07-22 12:49:30 +01:00
49e1b5785f
PCB_SHAPE::GetFocusPosition(): returns a point on the outline instead of center.
...
This function is used in DRC to locate a graphic shape. For not filled shapes,
this point must be on the shape outline, not on the center of the shape (the center
shows nothing)
Fixes #8832
https://gitlab.com/kicad/code/kicad/issues/8832
2021-07-22 10:41:50 +02:00
1a301d8eea
Stop using wxDialog::EndModal() from inside dialogs.
...
Calling wxDialog::EndModal() directly from inside the dialog is a
potential bug if the dialog is shown in the modeless or window modal
(quasi-modal). Use the internal button events where possible and
check for the appropriate mode before calling the correct end dialog
function.
2021-07-21 17:38:14 -04:00
0fb864d596
Pull some name changes back from 7.0 to ease merging.
2021-07-21 20:58:59 +01:00
af90d47edc
Altium: Fix calculating third arc point from uninitialized memory
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8671
2021-07-20 19:13:32 +00:00
234b414e2c
Fix misplaced break after code cleanup.
2021-07-20 17:05:00 +02:00
cf00319c85
More NULL expunging.
2021-07-20 07:27:18 -04:00
75190370dd
Convert -> Create from Selection
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8818
2021-07-19 18:45:33 -04:00
6a886e7085
Wizard qrcode_footprint_wizard.py: fix a minor issue and update code.
2021-07-19 18:36:58 +02:00
8bacc9fccb
Fix python 'testing for equality' syntax
...
'Testing whether an object is 'None' using the == operator is inefficient and potentially incorrect.'
Per https://lgtm.com/projects/g/KiCad/kicad-source-mirror/?mode=tree&ruleFocus=7900090
2021-07-19 15:42:30 +00:00
e61822c9e0
Naming conventions and a bug fix on arc points.
2021-07-19 13:17:12 +01:00
9cb4c9bfc2
3D viewer: ensure the activity messages are displayed on Linux after Frame creation.
2021-07-19 10:10:25 +02:00
a43ca978df
3D viewer: do not build the board 3D data during 3D frame creation, but after.
...
Building the 3D data is time consuming, so creating the data after the 3D
frame is shown is better, and the build activity is visible, especially on Linux.
2021-07-18 17:55:40 +02:00
56412cc843
PCB_TEXT: remove "hide" option, because they are never hidden.
...
- avoid write "hide" option in file
- always return true when calling IsVisible()
Fixes #8806
https://gitlab.com/kicad/code/kicad/issues/8806
2021-07-18 14:58:21 +02:00
1a5e63bcab
PANEL_SETUP_BOARD_STACKUP: fix a incorrect behavior when changing layer count,
...
and add a button to adjust dielectric thickness (regression fix)
Fixes #8800
https://gitlab.com/kicad/code/kicad/issues/8800
2021-07-16 20:39:00 +02:00
c794a6ce7a
Add pdb install option for msvc
2021-07-14 23:42:45 -04:00
e61b1f03b8
PNS: Discard duplicate tracks in FixRoute
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8737
2021-07-13 21:13:40 -04:00
ff2e470a6e
Remove virtual items from clearance calculations
...
Extends 3ea970f8c9https://gitlab.com/kicad/code/kicad/issues/8788
2021-07-13 16:10:36 -07:00
3ea970f8c9
Don't add virtual items to the display
...
By definition virtual vias should only exist in the backend, not
affecting users
Fixes https://gitlab.com/kicad/code/kicad/issues/8788
2021-07-13 15:52:41 -07:00
2f41dd4074
Fix unit var warning
2021-07-13 09:53:31 -07:00
f0513978ff
Back-port some fixes from 7.0 branch.
2021-07-13 17:24:23 +01:00
8b3ccab0a3
Implement explicit polygon construction for most pad shapes
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8650
2021-07-13 14:51:58 +00:00
0446d35f0d
Fix source comment/doc typos (follow-up)
...
Found via `codespell -q 3 -S *.po,./thirdparty -L aactual,acount,aline,alocation,alog,anormal,anumber,aother,apoints,aparent,aray,dout,einstance,modul,ot,overide,serie,te,,tesselate,tesselator,tht`
2021-07-13 10:48:17 +00:00
8d65663566
Copper Zone Properties dialog modifications
...
* Changed the net sorting mechanism make it similar to the 'Net Inspector' window
* Replaced the 'Show All Nets' check box with 'Hide auto-generated nets' check box
* Replace the warning label with wxInfoBar
* Removed unused controls and renamed controls where applicable
* Re-arranged the Copper Zone Properties dialog layout to improve user experience
* Minor code refactoring of DIALOG_COPPER_ZONE class
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8547
2021-07-12 21:55:46 +00:00
2889861c0b
Remove unused variables.
2021-07-11 23:42:40 +01:00
e953cb6a27
Add default severities for new DRC violations.
2021-07-11 23:33:17 +01:00
54b6f51633
DSN export: export RECT and ARC shapes (on silkscreen layer) from footprints
...
Also export arc track segments as lines. (Freerouter does not support QARCs)
Fixes #8769
https://gitlab.com/kicad/code/kicad/issues/8769
2021-07-11 18:15:40 +02:00
01d3a88faa
Allow unnamed embedded step files in altium boards.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7898
2021-07-10 16:37:45 +01:00
e02bb80bf3
Handle cancel when selecting copper layer.
...
Also changes the algorithm to ask only once, rather than one per
non-copper-layer object.
Fixes https://gitlab.com/kicad/code/kicad/issues/8767
2021-07-10 12:05:25 +01:00
625006ca30
Remove front/back SMD pad color now that we have opacity sliders.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8761
2021-07-10 10:13:55 +01:00
a06b95bb1f
Even out spacing around various panels.
2021-07-09 23:42:45 +01:00
11cd8738a3
Put wxSearchCtrl back by eliminating the excess focus events that in Windows land cause a "select all"
...
The setfocus calls were really because of the overtly aggressive mouse handler for the canvas that has been patched out.
2021-07-09 18:08:32 -04:00
046fb58183
Better command names and tooltips for zone fill/unfill commands.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8762
2021-07-09 22:13:50 +01:00
387cd36f60
Fix GenCAD Export flipped footprints
...
GenCAD Exporter flips the board footprints before exporting. The
exporter assumes that the flip happens T/B and not L/R.
Fixes KSC Issue #356
2021-07-09 09:44:30 -07:00
c5571afbd9
Teach GenCAD exporter to handle chamfered rect pads
...
Chamfered rect pads can also have rounded corners, so we handle these
using a polygon transform before exporting
2021-07-09 09:44:30 -07:00
6c3ba1c20b
Coverity issue fixes.
...
Issues #332032 , #332086 , #332157 , and #332171 .
2021-07-09 10:56:35 -04:00
473f10ab1f
Tooltips for Board Setup > Constraints.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8764
2021-07-09 13:06:59 +01:00
2bd735b631
A little more safety in setting the router idle mode.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8765
2021-07-09 10:26:12 +01:00
00f1b609c4
PNS: Don't run fanout cleanup when manually forced
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8724
2021-07-08 19:56:42 -04:00
e895af4ec6
Include arcs in create array. (Thanks to RigoLigoRLC.)
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6491
2021-07-08 18:28:21 +01:00
65c7958293
Coverity issue fixes.
...
Issues #331869 , #331875 , #332203 , #332159 , #332171 , #332180 , and #332648 .
2021-07-08 08:33:08 -04:00
49e6b80fc5
Rollback searchctrl change for FOOTPRINT_VIEWER_FRAME
...
Fixes #8751
2021-07-08 07:26:42 -04:00
a15a91dc00
Turn Footprint Text on when user turn on Value or Ref
...
In the appearance panel the old implementation doesn't turn the meta-
control "Footprint Text" back on when you switch on "Footprint Value/
Reference" while "Footprint Text" is switched off. This is neither
logically correct nor making the elements rendered correctly (value/ref
swicthes would affects corresponding bottom texts, but doesn't affect the
meta-control).
I didn't find a corresponding GitLab issue around, so I'm not saying
"fixes" here.
2021-07-08 03:05:51 +00:00
cafd42911e
Do not use opacity for zone outlines
...
The opacity is intended to aid seeing through
zone filled areas and applying it to outlines
makes them hard to see and select.
2021-07-07 22:04:11 -04:00
edc2be9018
Update width status when user choice changes
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8265
2021-07-07 21:26:21 -04:00
66eb2ddeb5
Remove auto when not needed for line length.
2021-07-07 20:05:50 +01:00
4207165c26
Fix PNS deleting too many segments
...
Don't exit the loop pre-emptively. Need to update lastLink.
2021-07-07 19:54:19 +01:00
cda26bd57b
SHAPE_LINE_CHAIN::NextShape instead of explicitly calculating indices
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8738
2021-07-07 19:46:47 +01:00
7a1e8520ae
Specctra export: Fix incorrect export of holes from mirrored footprints.
...
If a footprint is containing a closed shape on Edges.Cuts it is exported as Hole
(keepout zone). For flipped footprints the hole was incorrect.
Fixes #8753
https://gitlab.com/kicad/code/kicad/issues/8753
2021-07-07 16:40:19 +02:00
17ab2c7197
.kicad_pcb files: minor enhancements: add missing new lines in file.
...
No actual change, this is only a cosmetic change.
2021-07-07 11:44:11 +02:00
9d348d7e6d
Coverity issue fixes.
2021-07-06 13:32:34 -04:00
cd476e1728
Gerber plotter: ensure filled areas using thick outlines have a closed outline.
...
Fixes #8735
https://gitlab.com/kicad/code/kicad/issues/8735
2021-07-06 13:59:05 +02:00
1a23502e98
PAD::TransformShapeWithClearanceToPolygon(): better polygonal shapes:
...
- Oval and round pads ensure at least 16 segments per CIRCLE (like other shapes)
- For ERROR_OUTSIDE option, ensure the aarc approx error is the actual error,
not max allowed error.
These changes can be seen only for a large max allowed approx error, especially
when filling zones.
2021-07-06 10:50:46 +02:00
81fa40d659
Code style: Fix missing space
2021-07-05 20:39:42 +01:00
04ff8cde5e
Drag & Fillet Tracks: Ignore mouse up / click events until move / drag
...
Ensures that any click/mouse up events generated after clicking "OK"
in the "Override locks" dialog are ignored.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8123
2021-07-05 20:29:25 +01:00
ce8132bf4f
Arc Track Drag & Fillet Tracks: Copy lock status to new track(s)
2021-07-05 20:29:25 +01:00
b6e8beb38c
FP_TEXT: account for parent rotation when creating clearance shape
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8728
2021-07-05 13:49:40 -04:00
ea6769b702
The REPORTER interface is inherently line-based.
...
Also fixes a bunch of error messages that were similar but not
identical (which just increases translation burden).
Fixes https://gitlab.com/kicad/code/kicad/issues/8723
2021-07-05 13:41:06 +01:00
a92d337905
Use wxSearchCtrl in the footprint viewer/picker.
2021-07-04 22:06:01 -04:00
67762a11f6
Don't double-process arcs if we get one first
2021-07-04 12:22:52 -04:00
b291f36dae
ADDED: Convert tool can create polygons with arcs from contiguous line and arc segments
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/5409
2021-07-04 12:10:59 -04:00
576d70fab0
Fix file format syntax of arcs in polygons
...
No format bump as there is no way to create these files yet.
2021-07-04 12:10:59 -04:00
0116e9c94e
Silence Altium polygon-needs-at-least-3-verticies warning.
...
Too many Altium files appear to have these. Just ignore them instead.
Fixes https://gitlab.com/kicad/code/kicad/issues/8183
2021-07-04 11:02:59 +01:00
e0146f73b9
PNS: Pick up complete lines between pads when dragging components
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7614
2021-07-03 20:00:54 -04:00
91ea4a0569
PNS: Pick up segments directly between pads when dragging components
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7601
2021-07-03 19:50:04 -04:00
ab38dfd7ae
Fix build
2021-07-03 19:47:58 -04:00
77b68a827c
Remove unused variable
2021-07-03 19:20:54 -04:00
a5308e5f5c
Fix python console toggle to work across pcbnew/eeschema
2021-07-03 22:48:46 +00:00
126cd14715
Fix width setting bug in Net Inspector.
2021-07-03 21:16:15 +01:00
6a0a38ec29
Prevent wxWidgets assertion.
2021-07-03 21:16:15 +01:00
37fac6de35
Use ChangeValue() instead of SetValue() to keep from firing events.
...
Otherwise setting a filter also turns off the Show All Nets checkbox.
Also make sure that config values get saved when they're changed.
2021-07-03 21:16:15 +01:00
4b07a55ef8
Fix net name to net code map to handle sorting and filtering.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8714
2021-07-03 21:16:15 +01:00
3f73d8c2b5
SHAPE_LINE_CHAIN::Area() should always be positive
...
The algorithm relied on the assumption that the points were
ordered anti-clockwise. When ordered in a clockwise fashion, the
result was correct but negative.
Refer to https://www.mathopenref.com/coordpolygonarea2.html
for more information.
2021-07-03 19:37:50 +00:00
c3051ba48a
Refactor SHAPE_LINE_CHAIN to allow two shapes per point
...
m_shapes now has two possible indices. The first one is populated if
the point is associated with an arc and the second index is populated
if the point is shared between two arcs.
2021-07-03 19:37:50 +00:00
4f4deece6d
ADDED support for reading/writing arcs in polys
...
This adds support for reading and writing arc elements in polygons.
2021-07-03 19:37:50 +00:00
252bf76452
Fix off-by-one in AssembleTuningPath
2021-07-03 14:37:52 -04:00
3c59e452d6
PNS: Set tuned path correctly in skew tuner
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8708
2021-07-03 14:06:30 -04:00
1b9893841b
Add a tooltip explaining the track width dropdown
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8719
2021-07-03 13:36:18 -04:00
277bf2b719
Add feedback showing current router state to the message panel
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8265
2021-07-03 13:21:51 -04:00
bc65b7173f
Don't use SCH version number when inspecting PCB files.
2021-07-03 15:24:54 +01:00
3f6811f413
Minor dialog layout improvements.
2021-07-02 11:36:06 -04:00
400f4ae506
Code cleanup.
2021-07-02 15:54:26 +01:00
780a8a5154
Fix another place disallowing internal microvias.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8716
2021-07-02 15:54:26 +01:00
eff75b630f
Get rid of anonymous struct typedefs
...
We are using C++14 where there is no reason for this and is banned in C++20 under P1766R1. MSVC generates a warning under C++14 as a reminder.
2021-07-01 18:28:41 -04:00
c23e39dbe7
Avoid adding invalid text to temporary fp
...
Adding values/references to footprint text is an assertion. This avoids
the assert when copying a full footprint by skipping the extra text
2021-07-01 11:57:29 -07:00
24e54178db
Make sure pin hittest regions don't get too hard to hit.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8616
2021-07-01 15:43:19 +01:00
78d2e88f4b
Beautify export STEP dialog.
2021-07-01 15:43:19 +01:00
740b028180
pns_line_placer: do not constraint the 45deg of current segment in free angle mode.
...
Fixes #8691
https://gitlab.com/kicad/code/kicad/issues/8691
2021-07-01 16:38:31 +02:00
175b474c3e
Coverity issue fixes.
...
Fixes issues #280412 , #314755 , #329615 , #332459 , #332157 , #332167 ,
2021-06-30 18:08:49 -04:00
e9c0920be2
Use a standard SHAPE_POLY_SET hittest for pads.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8705
2021-06-30 22:36:29 +01:00
6810912f09
Refuse to load schematics from the future.
...
Also fixes a bug where an empty window would get left when loading
a file from the KiCad manager window errored out.
Also fixes a bug where we were getting the wrong exception because
we were rethrowing the type-casted one (rather than just calling
throw).
Fixes https://gitlab.com/kicad/code/kicad/issues/8604
2021-06-30 18:32:07 +01:00
5cac8afe1d
Remove long-dead revision support for LIB_IDs.
2021-06-30 13:12:57 +01:00
b1b4caee6a
Escape "naughty" characters in symbol names.
...
It's tempting to say that we don't need to exclude filename chars
from symbols, but we might regret that decision down the road. Better
to just escape them.
Fixes https://gitlab.com/kicad/code/kicad/issues/8694
2021-06-30 13:12:57 +01:00
17737af130
Fix some issues related to SHAPE_ARC:
...
- Some are related to shape errors when the allowed error to approximate circle
by segment is large and arc radius small.
- fix the actual error used in ConvertToPolyline().
- Use SHAPE_ARC::DefaultAccuracyForPCB() instead of a fixed value as extra margin
in zones. It should not change something, because it is also a fixed value
(5 micrometers), but it is not a magic number.
-TransformArcToPolygon() fix some issues and add a new algo, based on the arc actual
outline shape (initial algo is still available in code, just in case).
2021-06-30 13:33:49 +02:00
0d8f0d361e
Allow aligning pads in FP editor when locked
...
Locking is not a concept in the footprint editor. The signature for
checking is slightly different in the alignment tool, so we need to move
the check higher to allow aligning items in fpeditor
2021-06-29 16:48:31 -07:00
c6e4dcbecf
Pcbnew: fix incorrect geographical annotation dialog message.
2021-06-29 17:11:37 -04:00
e4c108ee3a
Pcbnew: minor geographical annotation dialog user message improvements.
...
Remove schematic from the completion message as it can no longer be
updated though the dialog.
Add a warning to synchronize the schematic with the annotation changes.
2021-06-29 15:17:00 -04:00
04b71f5167
Meander minimum spacing can be equal to track width + minimum clearance
...
2x track width was too constraining in some scenarios
Also better wording "Min Spacing" to indicate to the user that
the actual spacing could be larger if there are any constraints.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8172
2021-06-29 19:30:01 +01:00
e402563087
Don't recalculate meander spacing. Use constrained value instead.
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/1776
2021-06-29 19:30:01 +01:00
0c2ac9a711
Move GUI font code to common.
...
This also allows the Mac fixes for font facenames to be more
compartmentalized.
Fixes https://gitlab.com/kicad/code/kicad/issues/8657
2021-06-29 18:27:58 +01:00
64f07ea9c6
Update text variables after changes.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8697
2021-06-29 13:55:06 +01:00
1db33c7b3a
More safety (and better impl) for not sharing FP table/info stuff.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8657
2021-06-29 12:46:16 +01:00
a1dfc36233
More error message regularization.
2021-06-29 01:08:26 +01:00
c159500101
Remove nags and make Sel Layer and add via commands uniform.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8686
2021-06-28 19:17:01 +01:00
fa49b54f93
Fix minor issue in TransformCircleToPolygon() when aError is set to a large value.
...
pcb_painter.cpp: add (but not activate) compil option to show the conversion
of SHAPE_ARC::ConvertToPolyline as segments, for debug purposes.
2021-06-28 15:50:16 +02:00
9a865b1989
Fix a typo and a minor compil warning
2021-06-28 14:37:35 +02:00
d296bec5b8
Differentiate aSingleLine mode for SCINTILLA_TRICKS
...
This allows us to avoid the monospaced font (along with the tab-stop
handling), and process a <return> as an OK rather than just <shift> +
<return>.
Fixes https://gitlab.com/kicad/code/kicad/issues/8425
2021-06-28 11:20:12 +01:00
062c4fda62
More error message regularization (and translatability improvements).
2021-06-28 00:45:24 +01:00
08fb05e522
Make sure HPGL and DXF drill map generators honour origin setting.
...
ADDED: also adds origin setting to Footprint Position File dialog
and generators.
Fixes https://gitlab.com/kicad/code/kicad/issues/8669
2021-06-27 17:40:20 +01:00
4aa8318dc2
More error message regularization.
2021-06-27 14:24:02 +01:00
70ac70f360
Don't attempt to round-trip netnames through wxListBox.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8684
2021-06-27 12:02:21 +01:00
1fcd7992a0
Performance improvement for adding/removing dielectric layers.
...
(Roughly a 10X speedup on Mac.)
2021-06-27 09:43:20 +01:00
b924c85f80
Start recording the precision of dxf imports
2021-06-27 00:38:19 -04:00
0f27618125
Use a list dialog that can be parented by the Board Setup dialog.
...
(The current one keeps pulling the Kicad Manager window to the front
on OSX.)
I also removed the UpdateUI stuff which was probably causing:
Fixes https://gitlab.com/kicad/code/kicad/issues/5049
2021-06-27 01:41:35 +01:00
0dfb5fcaf9
Error message cleanup.
...
wxString::Format is redundant in a wxLogXXX call.
Error messages should generally be translatable.
Error messages should use generally consistent sentence forms.
2021-06-26 22:53:24 +01:00
4c5df22eb0
Don't show busy cursor when dialogs (including progress) are in use.
...
Also removes a stale comment.
Also moves the progress reporters earlier to lessen need for busy cursor.
Also cleans up some error strings and makes other more easily translatable.
2021-06-26 22:53:24 +01:00
310adedf85
Add GetCircleToSegmentError() to geometry/geometry_utils.
...
This function returns the error created by a circle to segment approximation.
2021-06-26 18:57:07 +02:00
5c21f93803
Consistency in progress and error messages.
2021-06-26 13:23:43 +01:00
e50eaed7b9
altium: Improve parsing of UTF-8 data
...
This is an implementation based on d4ccec05 from @fxtentacle
2021-06-26 13:58:56 +02:00
e6c047896c
altium: introduce progress reporting, fix possible nullptr when reading 3D models
2021-06-26 12:54:31 +02:00
95ec9c786c
Board setup spacing.
2021-06-26 10:55:31 +01:00
81fc710a5d
Use consistent terminology.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8681
2021-06-26 10:11:41 +01:00
83b549741d
PCB_ARCS in zones: increase clearance to avoid DRC issues. This is a workaround,
...
but arcs in tracks are still not fully fixed.
The clearance is increased by only 4 microns, that should not create issues.
2021-06-25 19:45:32 +02:00
9f51f7b055
Formatting and include cleanup.
2021-06-25 17:48:15 +01:00
31d7a0a8d1
TransformArcToPolygon(): slightly better approximation of arc.
...
The error between the "right" shape and the polygon is slightly smaller.
The approximations of the inner arc and the outer arc are better, but not perfect.
Also add (for test and debug purpose only) the code to show the polygon when
drawing a PCB_ARC (currently disabled)
2021-06-25 18:46:16 +02:00
1f4a56005e
Remove extraneous isPrinting test.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8609
2021-06-25 12:44:51 +01:00
4eafd2664a
FootprintWizardBase.py: fix use of cmp(), non existing in python3
...
Fixes #8677
https://gitlab.com/kicad/code/kicad/issues/8677
2021-06-25 09:04:49 +02:00
27804e40e2
Go back to using space-width for tabs (instead of max-char-width).
...
The max-char-width impl was buggy and never applied to PCBNew anyway.
Plus the stroke font has a max-char-width of 2.8 time the space width,
so it made for really wide tab spacing.
Also fixes a bug where the Scintilla editors weren't getting a
monospace font on Mac. (This bug may also exist on the other
platforms, but each would need its own fix.)
Also moves more of the Scintalla customizations to SCINTILLA_TRICKS
where they can be shared.
Fixes https://gitlab.com/kicad/code/kicad/issues/8666
2021-06-24 23:53:27 +01:00
232ffe97be
Diff pair gap only overrides netclass clearance when it's smaller.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8676
2021-06-24 16:56:53 +01:00
744dadd412
Naming conventions and formatting.
2021-06-24 16:56:53 +01:00
a89f6404b4
Fix logic bug found by Coverity.
2021-06-24 12:18:22 +01:00
8502fd6877
Divide-by-zero safety.
2021-06-24 12:18:22 +01:00
a8028e3bd1
Fix uninitialized variables.
2021-06-24 12:18:22 +01:00
95ab53d119
pcbnew: fix missing layer names and missing layers in stackup table
2021-06-24 08:52:51 +00:00
b532ecec52
Fix ALTIUM_RULE_TOKEN qa test failure
2021-06-24 05:58:24 +00:00
a7eb611744
Fix leftover vias in shove mode
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8597
2021-06-23 22:13:35 -04:00
27e9750507
Pcbnew: fix footprint selection bug.
...
Do not remove footprint objects from list of selected objects when there
are no drawable objects other than the reference and value text.
Increase the minimum size rectangle for footprints from 0.025mm to 1mm
when the footprint has no drawing objects so that it is easier to select
the footprint in this case.
Add some pretty colors to the footprint bounding box and hull outline
so that it's possible to tell the difference between selection areas.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8379
2021-06-23 19:46:33 -04:00
50eea4f487
Import progress dialog for FabMaster.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/5315
2021-06-24 00:21:37 +01:00
5fa5a73c6d
File open/import progress dialogs.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6864
Fixes https://gitlab.com/kicad/code/kicad/issues/2166
2021-06-23 23:55:54 +01:00
ae612a454e
Make blind via rendering more intuitive by putting top on top...
...
bottom on bottom, and the via colour larger.
2021-06-22 18:24:46 +01:00
7efca0113d
Reset m_inDrawingTool on exit.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8653
2021-06-22 13:02:45 +01:00
a31b667e2a
Plotter: better shape for CHAMFERED_RECT and ROUNDRECT pads with margin.
...
The shape of the pad+clearance area is not similar to the shape drawn on screen
2021-06-21 18:55:33 +02:00
9fb77473cd
pcb_painter.cpp: fix incorrect shape of CHAMFERED_RECT pads with negative clearance.
...
Negative clearance (for instance on mask or paste layer) was not taken in account
2021-06-21 18:52:57 +02:00
00b4134eb8
pcb_painter.cpp: fix incorrect shape of ROUNDRECT pads with negative clearance.
...
If a negative clearance (for instance on mask or paste layer) is set to more
than the corner radius, the drawn shape was broken (fully incorrect size)
2021-06-21 13:44:30 +02:00
685ee31c35
Workaround a few more OSX printf problems.
...
Also regularizes the frame title processing.
Also fixes a type where the library name wasn't processed for
variable expansion.
Fixes https://gitlab.com/kicad/code/kicad/issues/7742
2021-06-20 22:48:19 +01:00
de4eb1fcef
Convert to zone: take dest layer from editor active layer
...
Show non-copper zone properties if active layer is non-copper
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8646
2021-06-20 15:13:18 -04:00
b72545a432
Implement more aggressive re-entrancy blocking for drawing tools.
...
A similar strategy was already implemented in Eeschema.
Also adds some safety around clearing of autopan and mouse capture.
Fixes https://gitlab.com/kicad/code/kicad/issues/6909
2021-06-20 11:09:55 +01:00
89718dd3ba
Naming conventions.
2021-06-19 19:36:53 +01:00
c6606a0582
Hook up delete to undo last segment when routing.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8362
2021-06-19 11:37:20 +01:00
d26449cc29
Formatting.
2021-06-19 11:37:20 +01:00
f8e9542004
Fix crash when opening board setup after zone filler exits
2021-06-18 12:23:12 -04:00
3072422538
Allow caller to specify which library table to add library to.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8013
2021-06-18 11:39:18 +01:00
e540752640
Allow all selected footprints/symbols to be changed.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7389
2021-06-17 23:34:56 +01:00
16047b7419
3D preferences bug fixes.
...
1) Make sure prefs get saved when closing parent frame.
2) Add camera projection mode to settings.
Fixes https://gitlab.com/kicad/code/kicad/issues/8110
Fixes https://gitlab.com/kicad/code/kicad/issues/8626
2021-06-17 12:22:18 +01:00
1722bc03b0
Consistent terminology and punctuation.
2021-06-17 00:05:17 +01:00
cbd9208d73
Fix missing translation
2021-06-16 12:48:47 -07:00
7953a5c62b
Work around MacOS printf/format issues
...
MacOS wxWidgets implementation of wxPrintf/Format suffers from some
issues when mixing string types. We avoid this by manually formatting
the string ourselves.
Fixes https://gitlab.com/kicad/code/kicad/issues/8404
2021-06-16 11:54:55 -07:00
c8444913df
Implement lock between zone filler and drc.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8621
2021-06-16 16:12:01 +01:00
db19ae226a
PANEL_PCBNEW_ACTION_PLUGINS: fix not working "open plugins folder" on Linux
2021-06-16 08:15:20 +02:00
8f9800f760
Fix pad shape for certain legacy circular pads
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8615
2021-06-15 22:25:55 -04:00
1a35d8ba5d
Setup layer mapping when importing Eagle library.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7891
2021-06-15 19:20:17 +01:00
5b8f32acd2
Python script sample: fix compatibility with recent changes in code.
2021-06-15 18:19:58 +02:00
142dd48c99
SCRIPTING_TOOL::showPluginFolder(): fix wxWidgets3.14 compatibility (Linux mainly)
2021-06-15 18:19:58 +02:00
3616a8f0ee
Use polygon coordinates relative to the board.
...
Footprint polygon coordinates are relative to the footprint.
Translate to the board coordinates when doing hittest with
a (selection) rect.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8596
2021-06-15 15:04:11 +00:00
38f18d0505
Fixed according to KiCad Style Guide.
2021-06-15 14:59:04 +00:00
aed0352828
pcbnew: Replace CR inserted on macOS instead of LF when CTRL+Enter is pressed.
2021-06-15 14:59:04 +00:00
4418707e5e
Add a few more overbar syntax conversion calls.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8606
2021-06-15 13:09:18 +01:00
fbbe723811
Fix board_item.i after recent changes in Pcbnew code.
...
(some class names changed)
2021-06-15 10:59:52 +02:00
5d9ff0b9b7
Step export dialog: save 2 options in config file.
...
2 options (overwrite file and replace 3d shapes) were not saved previously.
2021-06-15 09:33:37 +02:00
fb46cd8bc5
Expunge the use of the word component from Eeschema code.
...
The only exception to this is the SPICE simulator's use of component
when referring to physical component (R, L, C, etc.) values.
2021-06-14 14:00:21 -04:00
30f3d11355
fix possible incompatibilities of python scripts due to recent code cleaning
2021-06-14 18:57:05 +02:00
2c1da70181
Write all variables to temp config file and have Kicad2Step use that.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7670
2021-06-14 16:54:45 +01:00
0527dc6fe0
Fp editor: fix initialization of default courtyard line thickness.
...
When no config file found it was initialized to DEFAULT_SILK_LINE_WIDTH,
although it was initialized to DEFAULT_COURTYARD_WIDTH in board editor.
Fixes #8344
https://gitlab.com/kicad/code/kicad/issues/8344
2021-06-14 08:31:55 +02:00
82f3df4086
Attempt to fix Python qa code after renames
2021-06-13 11:20:19 -04:00
5bb6b1a3cc
Minor cleanup.
2021-06-12 11:39:28 +01:00
3644224cb6
Build smoothed area at outline
...
The clearance to board edge will be set by the knockout routine.
Clipping twice can leave small imperfections in the edge that need to
get triangulated
2021-06-11 14:26:38 -07:00
096e342386
Prefix TRACK, ARC and VIA.
2021-06-11 22:07:02 +01:00
ade38f48bc
Add conversion from old `~...~` to new `~{...}` notation
2021-06-11 18:40:57 +00:00
16b0147af8
Prefix DIMENSION types.
2021-06-11 17:59:44 +01:00
44086ff2b2
Pull 3D preferences into KiCad preferences architecture.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/5187
2021-06-11 11:19:40 +01:00
5492fafdf4
Pcbnew: allows access Layers context menu when right clicking from below layers list
...
Fixes #6614
https://gitlab.com/kicad/code/kicad/issues/6614
2021-06-11 09:32:47 +02:00
d8b1e827c7
Check all previous merge events
...
Typo only continued merge loop when last element was successfully
merged, leaving tracks where multiple segments were colinear
Fixes https://gitlab.com/kicad/code/kicad/issues/5020
2021-06-10 16:59:35 -07:00
fbc135e69f
Rename SCH_COMPONENT to SCH_SYMBOL.
2021-06-10 10:34:49 -04:00
1c3df973d6
Coverity warnings fixes.
2021-06-10 13:45:02 +02:00
5f1e9bc8a7
Fix typos in source code
2021-06-10 01:24:15 +00:00
f968fc8719
Fix source comment / documentation typos
2021-06-09 19:32:58 +00:00
410dbe17de
Fix inital predefined track width selection in track properties dialog
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8578
2021-06-09 09:59:25 +00:00
d946d6e68f
Cleanup some pgm_base.h includes
2021-06-08 21:56:00 -04:00
ffa87e69c6
Remove/replace some stdint.h includes
2021-06-08 21:17:57 -04:00
c650d47626
Add warning message on non-unity scaling
...
When exporting STEP model, warn the user if one of their footprints has
a non-unity scaled model as this compromises the integrity of the STEP
export.
Fixes https://gitlab.com/kicad/code/kicad/issues/1781
2021-06-08 16:38:47 -07:00
b891b5e1e2
Do not blindly substitute model names
...
Makes model substitution (VRML->STEP in STEP Export) optional. This can
prevent nasty surprises where the user doesn't see/can't affect the
outcome
Also, when substituting models, do not maintain scale factor. So a VRML
model with non-unity scaling will not be export as a STEP file (of the
same name) with non-unity scaling. This is the first step to address
https://gitlab.com/kicad/code/kicad/-/issues/1781
2021-06-08 16:38:47 -07:00
6e01ce84b9
Break out eda_item_flags.h, fix the typedef to std::uint32_t, fix some signed vars
2021-06-08 19:12:30 -04:00
c854811ac4
Parent frame already includes undo_redo_container.h
2021-06-08 19:12:30 -04:00
2aaec31832
Don't put up "old version" warning for gerbview-generated PCBs.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8574
2021-06-08 22:12:44 +01:00
e6346e3103
Pass objects by reference instead of on the stack part 2.
2021-06-08 13:47:21 -04:00
75ce97e260
Fix the last cause of duplicate segments when completing a route
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6863
2021-06-07 20:34:09 -04:00
9268340dcc
Kick wx.h out of pcbnew
2021-06-07 18:38:51 -04:00
97a2c4094b
Don't label free pads with connections as '*'.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8385
2021-06-07 23:36:37 +01:00
3d32c096ab
Fix some problematic double-quotes.
2021-06-07 23:36:37 +01:00
8f2819cfa4
Kill the last of wx/wx.h in headers
2021-06-07 17:59:20 -04:00
022dd6072c
Add utility method to resolve symlinks
...
The same logic block to resolve possible symlinks exists in 5 different
places now. This change moves this duplicated code to a static member
function of WX_FILENAME instead.
2021-06-07 20:59:59 +00:00
542c02046b
Write through symlinks for schematics and PCBs
2021-06-07 20:59:59 +00:00
891e200fc8
Use Python to test for modules (not CPython)
...
CPython call requires Python 3.8+, so we work around to keep the 3.6
users happy
Fixes https://gitlab.com/kicad/code/kicad/issues/8554
2021-06-07 13:56:31 -07:00
d4edc70f65
Remove magic numbers where possible
...
Constant scales will be pre-calculated during compilation, so we can
leave the actual formula in place without penalty
2021-06-07 13:56:31 -07:00
3ff670d2a4
Disable ACTIONS::openPreferences for now.
...
wxWidgets needs to move the item to the KiCad menu on Mac, and it
can only find it if it has the id wxID_PREFERENCES.
2021-06-07 20:51:45 +01:00
6cfc2755ed
Remove a useless "#include wx/wx.h" from wx_html_report_panel.h
2021-06-07 09:26:13 +02:00
49c5130123
PNS: Implement final cleanup pass for redundant colinear segs
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6863
2021-06-06 21:52:35 -04:00
83080b67f5
Fix build on wx 3.0
2021-06-06 20:21:21 -04:00
3c6b98a0d5
PNS: preserve auto-detected track width when changing via sizes
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8046
2021-06-06 20:18:09 -04:00
99710aba48
PNS: use slightly less greedy algo to reset the mouse trail
2021-06-06 19:47:52 -04:00
0bc0f2265e
dialog_board_statistics.h shouldn't leak confirm.h
2021-06-06 19:34:53 -04:00
6cb8154ec0
PNS: Remove code that broke width changes during placement
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8334
2021-06-06 19:21:52 -04:00
5bb6f8c5e3
hashtables.h doesn't need eda_item.h
2021-06-06 19:11:35 -04:00
33bbf85a3e
Use the parent frame GetSettings helper rather than including for Pgm()
2021-06-06 19:05:12 -04:00
6789dac20b
PNS: Keep most recent good placement around for a rainy day
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8562
2021-06-06 18:56:33 -04:00
c9bc45f7ed
PNS: Limit the maximum walkaround distance factor
...
The constant chosen is somewhat arbitrary and may need
further tuning or a more complex algorithm, but in general
this will prevent churning when solutions can't be found or
a solution can be found but it is unrealistic (going around
the entire board)
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8558
2021-06-06 16:03:03 -04:00
d32b9c1c25
Use debug group for line placer debug
2021-06-06 15:44:53 -04:00
f5185f6927
Revert part of the anti-churn change, it causes bad side-effects
...
Further performance tuning could be useful but the part that
remains helps the most when hugging in large designs
2021-06-06 15:44:53 -04:00
66640f6144
Try and fix fedora build
2021-06-06 15:30:42 -04:00
8377ebb0e1
Fix msvc warnings
2021-06-06 15:30:31 -04:00
10e60acf34
Clean up including of board_design_settings.h
2021-06-06 15:03:42 -04:00
e4530fcf0d
PCB_MARKER does not need pcb_base_frame
2021-06-06 15:03:42 -04:00
5349f47f95
PNS: Prevent walkaround churn in unsolvable situations
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8558
2021-06-06 14:57:52 -04:00
3475d0cebd
PNS: Grab start item based on clearance if no direct hits found
...
Fixes annoying "routing start point violates DRC" messages when
entering the router from the hotkey and not directly over a track.
2021-06-06 14:57:52 -04:00
dc27079b71
cleanup tool event and tool action includes
2021-06-06 18:26:26 +01:00
0d7e48d5b1
Coverity fix.
2021-06-06 17:57:46 +01:00
17da050e69
Improve walkaround results when last point is inside the hull
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8563
2021-06-06 12:55:32 -04:00
be61bf29dd
Use more accurate hull shapes for round solids
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8561
2021-06-06 09:53:51 -04:00
581ba21865
Remove wx includes out of cadstar_archive_loader.h
2021-06-06 09:28:02 -04:00
b610b905fc
Cleanup track.h includes
2021-06-06 09:06:55 -04:00
3b7480c1c1
PNS: Invalidate start/end items after finishing a route
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8555
2021-06-06 08:52:39 -04:00
2d584ca5ec
board_item.h already included via board_connected_item.h
2021-06-06 08:47:59 -04:00
17d680de08
netinfo.h does not need to be in board_connected_item.h
2021-06-06 08:45:38 -04:00
4712d7a918
Remove a leaky wx/msgdlg.h include
2021-06-06 08:45:38 -04:00
e6c09b55a9
Remove unnecessary reporter.h include
2021-06-06 08:45:38 -04:00
dd9b8a9f73
Remove pcbnew.h includes in headers
2021-06-06 08:25:28 -04:00
c9a660a80c
Rework JSON integration to speed up build
2021-06-05 17:08:38 -04:00
06e967354f
Fix symlink read-/write-through code
...
Use `realpath(3)` instead of `readlink(3)`, which offers support for
relative and absolute symlinks alike, since all symbolic links will be
resolved to the absolute path of the linked-to file.
Fixes #8082
2021-06-05 14:22:50 +00:00
86add3bb85
Fix MSVC C4312 warnings when casting 32bit ints to pointer types on 64bit builds
2021-06-05 02:57:51 +00:00
d32d107923
Fix local ratsnest tooltip to mention "toggle".
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8415
2021-06-04 23:17:54 +01:00
ab04e24f9a
router: rhMarkObstacles should return a correct error status
...
Long story short: a few days ago I fixed error handling in routeStep(), so it actually started to recognize the wrong error status returned
by rhMarkObstacles() and think that the trace is always incorrect.
fixes: https://gitlab.com/kicad/code/kicad/-/issues/8557
2021-06-04 23:58:56 +02:00
f57ef55cd6
Pcbnew header housekeeping round 3.
2021-06-04 13:50:08 -04:00
c69c68a558
Pcbnew header housekeeping round 2.
2021-06-04 12:21:48 -04:00
2a6c7a7c0f
Pcbnew header housekeeping round 1.
2021-06-04 09:08:38 -04:00
2533fb22b3
Add the new pcb item container header to the SWIG wrapper
2021-06-04 12:49:11 +01:00
d8499e4914
I fixed the wrong typo in 6e272429, heh
2021-06-03 22:39:14 -04:00
6e2724294a
Fix typo in action description
2021-06-03 21:27:28 -04:00
0c879eead3
Cleanup headers in pcbnew pcad importer
2021-06-04 01:28:40 +01:00
f94816fbd4
Cleanup wx includes in the filter reader
2021-06-04 01:26:58 +01:00
3d4ce0796e
Add Gerber plot for SHAPE_ARC and SHAPE_LINE_CHAIN
2021-06-03 17:12:56 -07:00
00791e1e37
Fix compile issues on clangd.
2021-06-03 23:41:06 +01:00
1c1ba25ffd
Use char_str instead of c_str in previous commit
2021-06-03 18:13:35 -04:00
daf510344f
Fix build error due to pns changes
2021-06-03 18:05:48 -04:00
4e94b1fe86
Remove the universal sockets include
2021-06-03 17:59:46 -04:00
6f5cb1f97d
Fix printing of hidden refs and/or values.
...
IsLayerVisible() is patched to always return true when printing
(even when "print according to appearance settings" is checked, and
that's too risky to change at this point. So we also look to see
if the layer colour is set to the background colour.
Fixes https://gitlab.com/kicad/code/kicad/issues/8548
2021-06-03 22:44:04 +01:00
63fc7a1908
router: support for drag/walkaround/shove for joints between lines of different widths.
...
fixes: https://gitlab.com/kicad/code/kicad/-/issues/1773
2021-06-03 22:44:53 +02:00
af26eab5fb
router: even more debug in SHOVE
2021-06-03 22:44:53 +02:00
a744857267
router: fix array out-of-bound error in HullIntersection()
...
fixes: https://gitlab.com/kicad/code/kicad/-/issues/8538
2021-06-03 22:44:53 +02:00
3e98c44636
router: LOGGER now stores UUIDs, not pointers to BOARD_ITEMs.
...
Caused occasional crashes when saving the debug event log, as some of the BOARD_ITEMS could have been deleted before SaveLog call.
2021-06-03 22:44:53 +02:00
e5e588ebba
router: temporarily export LINE::Walkaround() debug global variables
2021-06-03 22:44:53 +02:00
70ed5c1ae8
router: introduce concept of 'virtual' vias as a base for shoving/dragging joints of lines of different widths.
2021-06-03 22:44:53 +02:00
4f05262705
Cleanup includes in board.h and footprint.h
2021-06-03 20:19:52 +01:00
23f8851409
Remove pcb_group include from board header
2021-06-03 20:03:31 +01:00
7bbf1b07b7
Fixup to expose PCB_GROUP in Python
2021-06-03 20:00:45 +01:00
e2e963d14a
Adding PCB_GROUP to python interface
2021-06-03 18:55:46 +00:00
49d65a0765
Fix some includes.
2021-06-03 18:33:59 +01:00
7c14e4e967
Common widget header housekeeping.
2021-06-03 12:02:45 -04:00
f40f696c37
Don't extract dp segment info from minimal-length
...
segments with 1IU of length are approximately parallel to everything and
the distance projections break down into rounding errors
Fixes https://gitlab.com/kicad/code/kicad/issues/8541
2021-06-03 08:44:17 -07:00
4df3cb912d
Remove another leaky wx/log.h header
2021-06-03 08:11:15 -04:00
7faee5eda5
Stop salt the eart with wxhtml.h
2021-06-03 07:49:49 -04:00
d79dd39be3
Remove redundant headers
2021-06-03 02:19:36 +01:00
3ab69939f9
Remove wx.h from many files
2021-06-03 02:19:20 +01:00
af2707929d
Don't leak a wx header via eda_item.h
...
Turns out this provided the translation header globally :D
2021-06-02 19:18:48 -04:00
9a07b03b4c
Replace boost::function with std::function
2021-06-02 18:39:43 +01:00
7f56ff4d42
Minor performance improvement
...
Don't keep searching the DRC RTree for collisions after we detect a true
(not clearance-based) collision
2021-06-02 08:15:37 -07:00
00ed75b891
Fix DRC performance with multi-layer keepout zones.
...
The main issue was a parameter mismatch which caused On^2 behaviour
for zone layers.
But there are several other performance optimizations here, along
with status bar updating for zones while running the dissallow test.
Fixes https://gitlab.com/kicad/code/kicad/issues/8521
2021-06-02 14:11:43 +01:00
eeb405c196
Cleanup some more excess math/util includes
2021-06-02 00:50:46 -04:00
cf2bb5692a
Remove the wxLog calls from math/util.h for now
...
This was leaking windows headers and partial wx headers to 1084 compilation units......
This also means math/util.h is leaking to 1084 compilation units which seems a bit high too.
2021-06-01 18:44:22 -04:00
cfa2b57c68
Use logical OR to quiet static analyzer (no functional change)
2021-06-01 18:44:22 -04:00
65fee5b2ec
Clear m_out pointer at end of save
2021-06-01 18:44:22 -04:00
d12e5d824e
Renaming for clarity and a performance improvement in corner rounding.
2021-06-01 23:11:54 +01:00
208dd5cbd5
Cleanup string handling in fabmaster import
...
Avoids round-tripping std::string->c_str->std::string and makes a few
auto references explicit
2021-06-01 13:54:34 -07:00
63cc7d16b4
Repair board on open
...
We need to ensure that boards do not have duplicated KIIDs, so we repair
the duplicates when opening an existing file. This does not change the
file on disk until saved
2021-06-01 13:39:59 -07:00
e050d42658
Re-enable KICAD_SCRIPTING_WXPYTHON
...
This keeps wxpython behind a build flag for platforms (mingw) that do
not yet support it.
2021-06-01 20:18:24 +00:00
68a5d5dc01
Fix issue reloading plugins
2021-06-01 20:18:24 +00:00
bbcc840989
Cleanup rebase fns
2021-06-01 20:18:24 +00:00
88e4b7f7c4
Update Python Helpers
2021-06-01 20:18:24 +00:00
adf885b667
Move pcbnew swig
...
Separates the python scripts into those using swig and those needed for
other scripting
2021-06-01 20:18:24 +00:00
bf1437899e
Add Python Tool to pcbnew
2021-06-01 20:18:24 +00:00
c7d188a8d0
Centralizing SCRIPTING class
2021-06-01 20:18:24 +00:00
192fbfd5e5
Finalize Python Frame
2021-06-01 20:18:24 +00:00
81d58bcea9
Working python window
2021-06-01 20:18:24 +00:00
6fbbba8db3
Adding Python shell KIFACE
2021-06-01 20:18:24 +00:00
f274a00c08
Remove PYTHON_* compile options
2021-06-01 20:18:24 +00:00
247da631f9
Revert "Fix typo and clean up leftover tracks"
...
This reverts commit ed66c0f14d1a102f03c0https://gitlab.com/kicad/code/kicad/-/issues/8526
2021-06-01 11:18:00 -04:00
d7616fdca8
Fix a few compil or coverity warnings.
2021-06-01 09:04:37 +02:00
ed66c0f14d
Fix typo and clean up leftover tracks
2021-05-31 22:42:56 -04:00
1a102f03c0
Clean up co-linear tracks after finishing routing
...
This involved adding some extra infrastructure to be able
to handle the case where a track that is sitting in the
router's commit waiting to be added to the board actually
needs to be deleted instead.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8419
2021-05-31 17:36:38 -04:00
6381ffd10a
Fix diff pair coupling test when gap constraint is in a different rule
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8519
2021-05-31 10:13:05 -04:00
c4cabb38d5
More worksheet -> drawing sheet cleanup.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8516
2021-05-31 12:26:44 +01:00
0598c82972
Terminology (use present tense for flags).
2021-05-31 12:26:44 +01:00
1b94534451
Revert "Use lambdas to fix paste conditions"
...
This reverts commit 65c7c77c3d
2021-05-30 21:25:42 -04:00
5c543b62c5
Cleanup: Use make_unique for the legacy plugin board deleter
2021-05-30 20:56:44 -04:00
65c7c77c3d
Use lambdas to fix paste conditions
...
`SELECTION_CONDITIONS::Idle && ` was evaluating as always true because this was referencing the function pointer
2021-05-30 20:37:16 -04:00
a7d1ef9927
Fix some more uninitialized warnings
...
From PVS Studio
2021-05-30 20:05:37 -04:00
382dca4e6f
Fix uninitialized member warnings
...
Based on PVS Studio report
2021-05-30 20:01:01 -04:00
67f0bbc6d7
router: fixed crash in HullIntersection() when the path has 0 or 1 points.
...
fixes: 8515
2021-05-31 00:20:32 +02:00
614787caae
router: clear head line geometry if current head routing failed + small improvement to follow-mouse optimization.
...
Also added a lot of verbosity for the pns-log-viewer tool.
Fixes: 8511
2021-05-31 00:18:42 +02:00
dfd80e077c
router: fix another corner case in LINE::Walkaround() (duplicated vertex triggered by feeding a closed loop as the input path)
...
fixes: 1775
2021-05-31 00:17:12 +02:00
0da85ded2f
PNS: Fix diff pair handling of microvias as start items
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8514
2021-05-30 15:51:28 -04:00
b7f32d7f53
Clean up some layout of pages in Board Setup
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8474
2021-05-30 14:04:00 -04:00
fcb89b99a3
router: walkaround algo should not copy the previous via position when the current iteration via placement fails.
...
fixes: 7827
2021-05-30 00:35:58 +02:00
af2e163890
router: annotate source locations of WALKAROUND debug items
2021-05-30 00:35:54 +02:00
8e2fb1bdb9
Treat Cut like a Delete while in a Move.
...
Also fixes problem where second action wasn't getting executed because
the event was getting eaten.
Fixes https://gitlab.com/kicad/code/kicad/issues/8072
2021-05-29 22:10:43 +01:00
3eb5a484e1
PNS: Don't clip tuning paths to pads on other layers
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8504
2021-05-29 15:52:44 -04:00
f6d6b7d263
Harmonize property names for zone/footprint/pad clearance and thermals
...
Use "override" instead of "local" for better clarity.
2021-05-29 14:12:23 -04:00
28f17c3ae6
PNS: Prevent wrong clearance being cached for new diff pairs
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8377
2021-05-29 13:31:17 -04:00
85ca85652d
Do not add debug items to view if debug flag isn't enabled
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8510
2021-05-29 12:40:24 -04:00
bd59da3642
PNS: Local min distance has a minimum points requirement
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8510
2021-05-29 12:40:24 -04:00
eff9746f34
CHANGED: Net highlight in PcbNew is now persistent to match Eeschema
...
CHANGED: Highlight net tool changed to highlight display toggle; moved to left toolbar
CHANGED: Multi-net highlight is now accessible when using the highlight net action
ADDED: Highlight Net and Clear Highlight actions to Net Tools context menu
ADDED: Default hotkey (Ctrl+`) for toggling net highlighting
The current and previous net highlight state are now stored and can be toggled
on or off with an action (no hotkey by default).
Highlight is now treated as a persistent state rather than a tool that is entered,
meaning there is no longer a special tool to enter in order to highlight nets.
Highlighting can be controlled while any other tool is active using the hotkeys
or context menu on a net object.
Tweak the icons for highlight net and layer display mode to better disambiguate them.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8250
2021-05-29 12:40:24 -04:00
81c7fb61f8
Sub-menu "Preferences..." in main menu "Preferences": fix not working accelerator key.
...
Accelerator keys are disable in our WX_MENUBAR. A common ACTION_MENU is used and
"Preferences..." is now shown in Hotkeys list.
2021-05-29 18:09:49 +02:00
ebd957b08e
router: rework router's debugging infrastructure to be more compatibile with the 'qa/pns/pns-log-viewer' tool.
...
The log viewer tool lets you inspect all the intermediate stages of the routing algorithms. This patch:
- Adds source location tracking of the debug calls (need to use the PNS_DBG macro, sorry)
- Moves some wxLogTrace calls to DEBUG_DECORATOR::Message() so that messages can be displayed alongside the corresponding geometric shapes
2021-05-29 00:13:24 +02:00
132eb53a40
router: clean some debug clutter
2021-05-29 00:13:24 +02:00
b3caa3c4d4
router: fix ordering of colliding hulls in NODE::NearestObstacle()
...
Replaced the generic SHAPE_LINE_CHAIN::Intersect() with PNS::HullIntersection() which correctly rejects
'non-penetrating' intersections.
2021-05-29 00:13:24 +02:00
e66bbfd1ec
router: improve the feel of the walkaround algorithm
...
Makes walkaround more 'huggy' - the trace being routed sticks to obstacles
instead of jumping around in uncontrollable way.
2021-05-29 00:13:24 +02:00
8148b5d81f
router: improvements in LINE::Walkaround()
...
- Fix walk failure if the input path starts on the hull boundary
(happens very often during tight walkaround)
- Input line can have a loop at the end now. Such condition happens when the routing
destination point lies inside the hull of a colliding primitive.
2021-05-29 00:13:24 +02:00
d2ec3fc4ed
router: P&S-specific hull/line interection function that correctly rejects segments/vertices that only touch the hull polygons without penetrating them
2021-05-29 00:13:24 +02:00
8c4361bbc6
router: adapt to new SHAPE_LINE_CHAIN::INTERSECTIONS structure
2021-05-29 00:13:24 +02:00
752ae4d519
Rename modification flag routines
...
Differentiates better between the EDA_ITEM IsModified(), referring to
items themselves changing and the EDA_SCREEN IsContentModified(),
referring to whether we have made any unsaved changes.
2021-05-28 12:07:04 -07:00
b1dcf74042
Use standard "Untitled" name for files without names
...
Also translates to provide useful information regardless of language
2021-05-28 11:51:54 -07:00
d7f219e98f
Unify IsSave and IsModify
...
The flags and calls were used identically, leading to potential
confusion/bugs. Testing for modification should go through
IsContentModified()
2021-05-28 11:51:54 -07:00
64cd401bdb
Delete Tool: Fix missing "Item Locked" popup
...
Fixes problem identified in https://gitlab.com/kicad/code/kicad/-/issues/8392
Removes same popup from schematic tool because SCH_ITEM can not be locked
2021-05-27 05:38:51 +00:00
4fb643df93
Update POINT_EDITOR when locking/unlocking via Hotkey/RMB.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8489
2021-05-26 16:03:35 +01:00
ba73456d49
Allow point editor to persist
...
After drawing a graphic, allow the control points to persist when
exiting the tool.
The effect of this is to make the first "Esc" press a
"return-to-select-tool" event without modifying the selection or control
points from within the drawing tools. The section "Esc" press, when in
the selection tool will clear the selection and the control points
2021-05-25 16:47:54 -07:00
5c9a73aa5e
Correct position for grid even when we're not snapping to a point.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8125
2021-05-25 21:57:19 +01:00
0eed73ea73
Make PCB_POINT_EDITOR honour locked flag.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8254
2021-05-25 18:13:24 +01:00
5f22025611
Don't drop text on Edge.Cuts when plotting.
...
While -our- user model is that Edge.Cuts is just for edges, it's best
not to dictate a particular model to users.
ADDED a DRC error when text (or a dimension) appears on the Edge.Cuts
layer.
Fixes https://gitlab.com/kicad/code/kicad/issues/8470
2021-05-24 19:54:52 +01:00
8f3343b9e3
Clear UUID paths of unmatched footprints even when not deleting.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8461
2021-05-23 22:50:11 +01:00
ab8428bd68
Naming conventions.
2021-05-23 22:21:34 +01:00
9554aaee7f
Can't use wxDD_MULTIPLE before 3.1.4.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8465
2021-05-22 22:19:37 +01:00
ee00d8386f
Make sure dir case can handle multiple selection too.
...
Files case already can.
Fixes https://gitlab.com/kicad/code/kicad/issues/8465
2021-05-22 20:39:26 +01:00
baf868fce7
Add footprint repair tool (currently just for duplicate IDs).
2021-05-21 17:52:11 +01:00
0d8a9a1091
Make sure that a tool never exits with autopan or capture.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8459
2021-05-21 14:53:58 +01:00
3de60231db
Allow clearance debugging of exact items in DRC violation.
...
ADDED: Run clearance resolution tool... RMB menu item to DRC
clearance errors.
Fixes https://gitlab.com/kicad/code/kicad/issues/8438
2021-05-21 00:00:24 +01:00
e93e9fa3e5
Add rudimentary type checking to rule eval with reporter.
...
Also cleaned up existing error reporting to not expend CPU cycles
when there was no reporter.
Fixes https://gitlab.com/kicad/code/kicad/issues/8438
2021-05-20 23:06:24 +01:00
4c3d78dec0
Break out separate holes-co-located violation.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8456
2021-05-20 10:36:56 +01:00
60dbda9dd2
Pcbnew: try to fix an issue about frame title.
...
for Pcbnew, this issue (see bug 8404) is only seen on OSX.
So I am blindly trying to add to Pcbnew a fix made for Eeschema.
2021-05-19 17:28:15 +02:00
be3a08bfa7
Pcbnew printing: fix missing zones on non copper layers.
2021-05-19 10:05:49 +02:00
ed2f2257ce
Remove footprint locking in the footprint editor.
...
(It doesn't make any sense there as the position is always {0, 0} in
the editor.)
For discussion see:
https://kicad.zulipchat.com/#narrow/stream/258851-Developer-Chat/topic/Is.20there.20a.20reason.20why.20kicad.20now.20seems.20to.20lock.20pads.3F
2021-05-18 23:14:17 +01:00
810a717e4e
Remove unused NETINFO_MAPPING member
...
The legacy plugin no longer implements saving, so no net code renumbering
is needed.
2021-05-17 11:54:06 +00:00
c33b2cfa8d
PANEL_SETUP_MASK_AND_PASTE_BASE: fix another cosmetic issue.
...
On KDE, a text was truncated, although there is room to display it
2021-05-16 13:22:48 +02:00
4c69a74505
Force layers visible when routing on them.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8432
2021-05-16 11:18:31 +01:00
2354222188
Remove tool tips not related to the objects they are depending on.
...
Probably due to a too zealous copy/paste.
2021-05-16 10:03:12 +02:00
057e2cd6b7
Pcbnew: fix some cosmetic issues in a few dialogs
...
Depending of Window managers, some texts were truncated.
Also avoid to write a sentence with the beginning in one widget,
and the end in another widget: it makes the sentence not translatable
2021-05-16 09:13:13 +02:00
138a4b21c1
Smarten custom-pad-shape test for collapsing solder mask margins.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8413
2021-05-16 00:41:19 +01:00
d1061b9683
3D viewer: Fix broken handling of text thickness, thus creating erroneous item positions
...
Especially, texts having a not centered justification were shown with artifacts.
2021-05-15 13:18:06 +02:00
ccaf9e11df
Load footprint info when there's no cache available.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8371
2021-05-14 22:24:21 +01:00
1642f0d784
Move microwave tools from toolbar to Place menu
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8233
2021-05-12 02:34:52 +00:00
75f49ba1b6
Add length tuner settings to toolbar context menu
2021-05-12 02:34:52 +00:00
34145d8170
Add length tuning menu to vertical pcb toolbar
2021-05-12 02:34:52 +00:00
c49af57c2a
Don't require a restart to get the current m_Live3DRefresh setting.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8349
2021-05-11 15:07:52 +01:00
bc6b9b527a
Allow stackup height to be excluded from length calculations
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8384
2021-05-10 22:11:58 -04:00
5157c6c3b9
Use half copper thickness as the thickness of the start and end of vias
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8384
2021-05-10 21:48:50 -04:00
64c76d8067
Hide unimplemented controls in length tuner settings
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8383
2021-05-10 21:40:52 -04:00
1201ab5cac
Clarify track segment length vs net length in message panel
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8396
2021-05-10 21:06:17 -04:00
ce01a28aad
Don't double-remove nets when netcodes are reused
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8206
2021-05-10 19:52:19 -04:00
7356f9568d
Move grid disable modifier from ALT to CTRL.
...
Also had to move the H/V/45 disable modifier from CTRL to SHIFT.
Fixes https://gitlab.com/kicad/code/kicad/issues/8124
2021-05-09 20:17:40 +01:00
916a15793f
Fix some OSX compiler warnings
2021-05-09 12:59:57 +01:00
a5ff27cae7
Pcbnew, EDIT_TOOL::GetAndPlace(): fix and issue, and allows execution only if
...
called inside the board editor.
Fix also a broken behavior: the current action was not cancelled, and if it is
called during a move items (when typing the 'T' key), items were broken.
The actual bug is the fact it is called also in fp editor and footprint wizard frame,
because it is part of EDIT_TOOL action list, common to fp editor, and should not.
But a full change is much more costly than just a filter.
2021-05-09 11:51:57 +02:00
b4b59c3b33
Fix uninitialized variable.
2021-05-08 20:49:51 +01:00
1a45d9474b
Don't show commands that cancel routing when routing is in progress
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8363
2021-05-08 14:55:02 -04:00
6e017b475d
Warn user before removing invalid rows from library table entries.
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8080
2021-05-08 08:58:54 -04:00
aaffd0c137
Pcbnew: fix crash due to a not tested null pointer.
...
Fixes #8369
https://gitlab.com/kicad/code/kicad/issues/8369
2021-05-07 10:35:00 +02:00
e709e77870
Add missing locked setting to zone dialogs.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8255
2021-05-06 22:50:03 +01:00
cda70a66c3
Spelling fix vrml->VRML
...
Closes https://gitlab.com/kicad/code/kicad/-/merge_requests/739
2021-05-06 21:55:36 +01:00
1b9a8564af
Pcbnew: fix incorrect PCB_TEXT::TextHitTest( const EDA_RECT& aRect,... ).
...
It was not taking in account the text rotation in block selection.
Fixes #8366
https://gitlab.com/kicad/code/kicad/issues/8366
2021-05-06 18:48:23 +02:00
2e3860de6f
Naming conventions.
2021-05-05 22:58:40 +01:00
56058314be
Fix minor Coverity warnings and minor compil warnings.
...
(uninitialized or shadowed vars)
2021-05-05 08:58:55 +02:00
094dd2e08c
pcbnew : rotate relatively to selection center
2021-05-04 09:13:20 +00:00
16bb45208a
Fix save accelerator key handling when library tree has focus.
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8247
2021-05-03 19:41:07 -04:00
c7345096f8
Use wxFFileInputStream explicitly when loading xml documents
...
wxFFile (FILE, buffered) is better than wxFile (syscalls)
2021-05-03 19:39:56 -04:00
939b5e1932
PCB_EXPR_EVALUATOR: don't use string comparison to check for undefined enum values
2021-05-03 23:45:54 +02:00
d7e44b5181
Default delete-tracks-inside-pads to false.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8326
2021-05-03 19:48:24 +01:00
f2677340f2
Access the new paste behaviour via a new Paste Special... dialog
...
ADDED Paste Special... action in pcbnew
CHANGED Additional options for Paste Special... in eeschema, including
"Assign unique reference designators to pasted instance"
2021-05-03 19:38:32 +01:00
98c8f43320
eeschema and pcbnew paste: consistent paste behaviour
...
Duplicates are reannotated on paste in the same way in pcbnew and
eeschema such that when copying and pasting the same block in the
pcb and schematic, the reference designators will match.
2021-05-03 19:38:32 +01:00
ae009e0758
Ensure clipboard data is available after KiCad closes
...
Always Flush() after SetData()
2021-05-03 19:38:31 +01:00
688ee18989
Don't apply margin to "interior" shapes in a shape-set.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8345
2021-05-03 12:12:03 +01:00
a6ad7a4a70
Python wizards: Fix a compatibility with "old" pythons scripts, after commit 21fde9b6.
...
Temporary fix until a full python API exists.
2021-05-02 16:06:11 +02:00
c4801a4dd4
Catch oom for graphics importer
...
Because DXFs and SVGs could be nasty sized
2021-05-01 14:26:47 -04:00
d4bb1cbc63
Make drawing sheet loading slightly smarter
2021-05-01 14:11:31 -04:00
f6f2284851
Fix missing includes on Linux after commit 0427bda7
2021-05-01 20:05:01 +02:00
0427bda768
Remove useless wx/wx.h include, that create sometimes compil warnings on msys.
...
wx/wx.h includes all wxWidgets .h files, and sometimes creates collision
names in #define between kicad and windows headers
Moreover, blindly including a lot of useless files is compil time consuming
2021-05-01 19:32:15 +02:00
18ff8ea4a0
Try to catch memory allocation errors in pcbnew and eeschema
2021-05-01 13:11:10 -04:00
3a9a85b373
Enum class PAD_PROP_T
...
Renamed such that it does not affect python
2021-05-01 10:58:30 -04:00
03cf2b517f
Enum class PAD_ATTR_T
...
Renamed such that python stays the same
2021-05-01 10:51:54 -04:00
e20562b09b
Some cleanup
2021-05-01 10:37:20 -04:00
b243c2280d
enum class PAD_SHAPE_T
2021-05-01 08:22:35 -04:00
21fde9b629
enum class PCB_SHAPE_TYPE_T
2021-04-30 22:36:12 -04:00
7df9fa0631
Diffpair gap should only override clearance within a coupled diffpair.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7975
2021-04-30 18:39:21 +01:00
6e874265fa
Autosize all of the layer columns to ensure dpi match
...
Fix #8202
2021-04-29 20:01:07 -04:00
c149ed8905
Allow diffpair gap to override normal netclass clearance.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7975
2021-04-29 10:23:49 +01:00
91421f9908
Separate logic for multi-select and click-select when filtering.
...
Also removes a bunch of old implementations of pad locking and
filtering which are no longer needed. (They're now handled by the
uniform locking code.)
Also removes some of the auto-promotion logic. Rotating a footprint
when a pad was selected is going to be surprising whether the pad
is locked or not.
Fixes https://gitlab.com/kicad/code/kicad/issues/8322
2021-04-29 00:07:35 +01:00
39a0bc6252
Remove erroneous block check in dxf import added during previous improvements
2021-04-28 18:48:59 -04:00
4d9829ec8b
Fix some issues related to python scripts:
...
- make PadArray.py compatible python2/3
- fix a wxWidgets warning in pcbnew_scripting_helpers.cpp shown in some cases
2021-04-28 14:02:47 +02:00
78b555afa2
Filter Select All event against hierarchy
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8316
2021-04-27 16:58:45 -07:00
a433451bd8
router: 'root line' tracking in the SHOVE algorithm. See comments for detailed explanation.
2021-04-27 14:13:16 +02:00
3a8744d054
router: introduce concept of a root lines in the OPTIMIZER.
...
By 'root lines' we mean the oldest traceable ancestor of each track moved by the router
(i.e. after shoving for a while, the root of each shoved line is it's latest non-shoved version).
With this we can teach the OPTIMIZER more tricks, such as the LIMIT_CORNER_COUNT constraint. It ensures
the results of the optimization will not be less cornery than the original line, reducing the feeling
of the optimizer being too intrusive.
2021-04-27 14:13:16 +02:00
76f8861e6e
router: revert Seth's arc adjustment in StartDragging().
...
Fixes picking the last segment instead of the last vertex to drag (when one is requested).
I didn't notice any behaviour change of the dragger wrs to arcs.
2021-04-27 14:13:16 +02:00
524ca442f3
Old python scripts: fix issues due to code change, and make them Python3/3 compatible
2021-04-27 11:55:56 +02:00
b63c482347
Fix a link issue with pcbnew_wrap.cxx (MSYS + Windows 64 bits specific)
...
For some reason the .cxx file generated by SWIG cannot be linked if compiled
with debug options.
It creates a *lot* of not found symbols. So compile it with release mode (MSYS only)
2021-04-27 07:40:34 +02:00
5bf37a9b24
Don't allow selection crossing a parent/child relationship.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8292
Fixes https://gitlab.com/kicad/code/kicad/issues/7255
2021-04-26 18:47:44 +01:00
b65b1f8e9c
Revert NPTH commit, and add some comments.
2021-04-26 17:33:49 +01:00
7afc3f7df9
Rearrange track width button to be more obvious
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8300
2021-04-25 19:58:11 -04:00
cbe8b1644a
Fix segfault after using group properties dialog
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8302
2021-04-25 22:15:19 +02:00
d2b6050792
Minor dialog spacing adjustment.
2021-04-25 19:26:05 +01:00
e6bf922a77
Make sure connectivity is locked for zone filling.
...
See 1e33928b96
2021-04-25 18:09:53 +01:00
e3eacafbcb
Run hole clearance tests on NPTH pads, but not copper clearance.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8295
2021-04-25 17:55:43 +01:00
b7279c0bab
Don't allow rounding errors to flag DRC violations in hole2hole.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8295
2021-04-25 17:55:43 +01:00
517bcb15b1
Formatting.
2021-04-25 17:55:43 +01:00
953f579d59
Keep dialog fields in sync with dummyPad values.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8294
2021-04-25 14:19:38 +01:00
93d42e9902
Pcbnew: Fix crash when importing a netlist created by a 5.1 Eeschema version.
...
Fixes #8293
https://gitlab.com/kicad/code/kicad/issues/8293
2021-04-25 15:13:55 +02:00
eb85836234
Make sure we have footprint courtyards before depending on DRC rules.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8291
2021-04-25 12:45:06 +01:00
1e8b23402c
Bump board format version for locked syntax fix.
2021-04-24 19:11:17 +01:00
e27733587d
Fix 2 minor Coverity warnings.
2021-04-23 19:57:36 +02:00
3be17ceb50
PANEL_SETUP_TRACKS_AND_VIAS: fix UI issues.
...
Fixes #8264
https://gitlab.com/kicad/code/kicad/issues/8264
2021-04-23 10:58:59 +02:00
7569fc8aad
Bring back live move of footprint in 3D view if live refresh is on
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8220
2021-04-22 22:32:41 -04:00
263e026ac4
Initialize grid visibility in appearance panel constructor
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8266
2021-04-22 22:10:55 -04:00
075bd788eb
Remove unused OBSTACLE_VISITOR::m_extraClearance
2021-04-23 01:53:09 +00:00
3e96fb851c
Give diff pair toolbutton a menu also
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8233
2021-04-22 21:37:15 -04:00
ecd9bf696e
Be consistent about using nullptr instead of 0
...
0 can be too easily overloaded into an int, so ensure we use nullptr
when we mean pointers.
2021-04-22 22:20:34 +01:00
54e18f6b1f
Pcbnew: remove update schematic option for geographical annotation dialog.
...
REMOVED: Update schematic option from geographical annotation dialog due
to potential issues with incomplete and/or broken updates. Use "Update
Schematic from PCB" tool to update reference designation changes.
Forcing the footprint reference designator changes back to the schematic
without checking any other board changes in the schematic could leave the
schematic in a undefined state. The update schematic from board tool is
the correct method to sync any changes from the board.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8042
2021-04-22 12:45:59 -04:00
cf47d665ea
PNS: Dragged line needs to retain width
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8246
2021-04-22 09:04:41 -04:00
9b1890606d
PNS: Do not allow resolved optimal values to go below board minimums
2021-04-21 22:43:26 -04:00
ae113ea299
DRC: inDiffPair should return false if the coupled net is missing
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8268
2021-04-21 22:41:17 -04:00
e7d3bf29aa
Don't save project for legacy board without explicit action
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7368
2021-04-21 21:27:23 -04:00
e5d029af6b
Margin layer missing from some edge clearance tests.
...
Fixes bug reported on KiCad Forums.
2021-04-21 21:58:47 +01:00
61ce1b35ec
R/W dimension lock flags and update format for all lock flags.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8255
2021-04-21 19:59:27 +01:00
3b049b32cf
Show if pads, zones, and dimensions are locked in the status bar.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8255
2021-04-21 19:58:18 +01:00
25e2f35308
Remove no-longer-needed macOS wxPython things.
2021-04-21 12:50:31 +00:00
a06f0ca908
Clean up macOS Python3 paths
2021-04-21 12:50:31 +00:00
7357424efc
Update macOS to Python 3, wx 3.1, and Phoenix.
...
This is a work-in-progress. It could use testing while I continue to fix
the remaining pieces.
There are some changes that will be needed for signing and notarization.
This currently relies on a Python tool I wrote (dyldstyle) to fixup
KiCad.app correctly. I would like any bundle fixing necessary to use a
built KiCad on macOS to live inside KiCad, rather than in
kicad-mac-builder or elsewhere. While I was experimenting, I found this
worked, however, and I would love to get extra hands testing.
I added a CMake argument, MACOS_EXTRA_BUNDLE_FIX_DIRS, for devs and
packagers who have extra directories they need to add to
fixup_bundle on KiCad.app.
There's an issue about differing behavior when KiCad is opened via
the command line or via Finder/launchd.
2021-04-21 12:50:31 +00:00
c973a447df
Make sure board netinfo list is updated when net inspector renames a net
2021-04-20 21:15:42 -04:00
cbd7d698a9
Fix diff pair error message suffix suggestions
...
We accept diff pairs that end in N/P, no underscore required
2021-04-20 21:08:34 -04:00
8792d7288d
Net inspector: Fix calculation of via length
...
We have a function for this in the BOARD_STACKUP now, and it returns
a more correct number (excluding the start and end copper layers)
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8256
2021-04-20 20:03:38 -04:00
2535daf661
PNS: Account for via stack height in diff pair length tuner
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8256
2021-04-20 19:31:10 -04:00
a7f956581c
Pcbnew: fix board file formatting issues.
...
This does not required a board file version change. All of the changes
are white space formatting fixes and improvements.
2021-04-20 10:18:31 -04:00
ce3a84f579
Consolidate wx aui dock art color setting
2021-04-19 21:12:02 -04:00
ba3f0d5d07
Fix a wxWidget assert and a minor wxWidgets alert
2021-04-19 15:01:00 +02:00
287b0eea0f
TRACK::GetMsgPanelInfo(): For arc, display shape ("TRACK (arc)") and radius.
...
Also display "TRACK (arc)" in DRC error message, instead of just "Track".
2021-04-19 10:00:46 +02:00
dd828bd964
PNS: Bring back original Highlight Collisions behavior
...
From discussion with Tom, Jeff, and Wayne, it appears as though
we all agreed that Highlight Collisions should behave like it
did in 5.1, which is to say, always just highlight collisions,
never prevent them. The Allow DRC Violations checkbox just
controls whether or not you can fix/commit the head line if it
has violations; you are not prevented from moving the head
line to violating positions in any case.
Right now, there does not seem to be much demand for a separate
"Stop at First Obstacle" mode since Walkaround basically does that
but better, but we agreed that if there is demand for it in the
future, it should be implemented as a new router mode rather than
a behavior of Highlight Collisions mode controlled by the Allow
DRC Violations checkbox.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7828
2021-04-18 21:01:07 -04:00
4538d78828
router: fix via shoving regression.
2021-04-19 00:43:30 +02:00
57de83897a
router: VIA SetDrill() and SetPosition() must update the hole shape too.
2021-04-19 00:43:15 +02:00
dc3a73a2fb
PAD::MergePrimitivesAsPolygon(): add option to approximate circles outside the actual shape
...
When creating a polygon from an arc/circle, the small error due to approximation
can be now inside (when drawing/plotting the shape) or outside the circle
(when building a clearance area) like other pad shapes
Fixes #5313
https://gitlab.com/kicad/code/kicad/issues/5313
2021-04-18 20:10:00 +02:00
ec6995697d
PNS: even more free performance
...
If this doesn't work, we have bigger problems
2021-04-18 09:50:06 -04:00
2d9bac804c
Pcbnew: minor fix: remove extra spaces when outputting pad primitives section.
...
No format change.
2021-04-18 15:25:14 +02:00
6425ad4118
PNS: Fix propagateDpHeadForces obstacle calculation
...
Using a synthetic via here doesn't quite let us use VIA::PushoutForce
because it will use the wrong clearance, and also doesn't quite have
the logic we want. I am not familiar enough with PushoutForce to know
if its logic is a bug in other cases, so instead I just brought in the
parts of its algorithm that are needed here.
Additionally, we prevent pushing more than once from a given obstacle,
which causes walkaround to be more successful when routing diff pairs
against a large collider such as a keepout area.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8232
2021-04-17 22:37:30 -04:00
5974446523
PNS: Let's make the r-tree work for us
...
I'm not sure where the magic number of "4x worst" came from, but it's
been around forever. This is extremely inefficient as it negates much
of the power of r-tree filtering in dense designs. If we really trusted
it, we could set this just to worstClearance. Keeping it above the worst
clearance by a little bit seems to provide enough of a speed improvement
to resolve the test cases I have, so I'll go with that for now.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7777
2021-04-17 21:37:11 -04:00
a577b6386d
Fix missing status bar update after undo/redo.
...
(Reported by Franck.)
2021-04-17 17:21:54 +01:00
13473420e5
Remove duplicated routine and fix bug in UTIL version.
2021-04-17 15:10:59 +01:00
2ae264751f
Rename class_board_stackup.{h|cpp} to board_stackup.{h|cpp}.
2021-04-16 17:07:06 -04:00
3a6a919097
Improve clarity in the Print dialog around edge cuts layer.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8200
2021-04-16 16:53:51 +01:00
29c45743b7
Fix calculation of arc lengths; include them in net inspector
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8140
2021-04-15 21:06:35 -04:00
64c8befa01
Fix copy/paste error
2021-04-15 20:45:32 -04:00
928d336bee
Only try to copy design rules file if it exists
2021-04-15 20:43:35 -04:00
23a1f8b17a
Enforce board minimum clearance over local clearance overrides.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8199
2021-04-15 21:44:04 +01:00
311bb9c36e
Save rules file when saving project.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8143
2021-04-15 10:23:38 +01:00
9a282f081a
Document rules version clause.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8201
2021-04-15 10:23:38 +01:00
4920692bcd
DIFF_PAIR_GAP_CONSTRAINT does not need to be restricted to two items
...
We just need one item to see what netclass we're in; the constraint
itself is specific to diff pairs so the condition doesn't need to be.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8205
2021-04-14 23:43:43 -04:00
1d7e5a0443
Fix merge error that prevented a previous change from working
2021-04-14 23:30:16 -04:00
433e148e08
Move some string formatting functions out of base_units
...
Keeping them in base_units means that we can't introduce
any dependence on these functions to anything that needs to
compile without one of the unit defines (EESCHEMA, PCBNEW, etc)
2021-04-14 23:21:10 -04:00
268d570941
PNS: keep last valid diff pair trace as current state
...
This allows fixing/committing what is on screen even if the current
cursor position doesn't have a valid solution (the old behavior
would result in the current trace disappearing)
2021-04-14 23:21:10 -04:00
c829dba88e
PNS: Reduce minimum distance to start turn in diff pair placer
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8193
2021-04-14 23:21:10 -04:00
cac4d70154
PNS: Respect fix-all in diff pair placer
2021-04-14 23:21:10 -04:00
fe6cc0c3d8
Spokes are from center of pad, not from hole (ie: pad position).
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8195
2021-04-14 11:34:26 +01:00
f7cc6d1e1e
Fix save as and save copy as for project files.
2021-04-13 17:56:50 +01:00
d79057b83a
Fix merge wreckage in building netclasses.
2021-04-13 17:56:50 +01:00
94e8855c13
Generate changed message before making change.
...
Otherwise we've lost the "before" value.
Fixes https://gitlab.com/kicad/code/kicad/issues/8186
2021-04-13 13:43:30 +01:00
55d2d0d93e
Fix some bugs in file save as.
...
The order of operations *appeared* to be a bit out of joint.
We need to create a new project in project mode as well as in standalone.
Fixes https://gitlab.com/kicad/code/kicad/issues/8143
2021-04-13 13:34:40 +01:00
296a9df530
PNS: Pick up diff pair starting width from continuation track
2021-04-12 23:10:15 -04:00
1d9ca181a2
PNS: Use existing seg direction if both DP segs are parallel
2021-04-12 22:34:13 -04:00
37dd4038eb
Display options can change during the picker lifecycle
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7133
2021-04-12 22:12:48 -04:00
36ef198610
Clean up nets from items when deleting in the inspector
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8162
2021-04-12 21:17:42 -04:00
311cde0984
Safety check suggested by Coverity
2021-04-12 20:42:50 -04:00
2aa5e568e8
Refactoring
2021-04-12 20:40:05 -04:00
73fb85a352
PNS: Calculate diff pair primitive orientation using anchors only
...
The previous method fails if the primitive is an expanding or
contracting pair (diagonals going inward or outward) resulting in
incorrect orientation, which then leads to incorrect candidate
gateways being generated and no solution found.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8185
2021-04-12 20:34:44 -04:00
94fad2944d
ConvertOutlineToPolygon: Don't crash if we didn't find a segment owner
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8184
2021-04-12 19:59:55 -04:00
715c61ac9f
PNS: Fix yet more arc edge cases
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8150
2021-04-12 19:59:55 -04:00
edb2136a0d
CADSTAR PCB: KiCad's minimum permitted Through Drill is 0.0508mm(2mils)
2021-04-12 20:25:05 +01:00
a3196a11a7
CADSTAR PCB: Be more specific with "allow thermal pads" DRC hack
...
Only tag the footprint as such when we know it has overlaping copper
over the pads with different pad numbers
2021-04-12 20:25:05 +01:00
b5edd5f6a5
CADSTAR PCB: Fix loading of thermal pads
...
- Create a pad if a component copper is associated with any other pads
in the footprint.
- Rename/renumber 'PCB Only' pads that are associated with a component
copper and make them all use the same pad name/number.
2021-04-12 20:25:05 +01:00
2eb96279a2
Fix FOOTPRINT copy constructor so it maintains ordering of containers
2021-04-12 20:25:04 +01:00
a4c08e2af6
Apply Eeschema cursor updating architecture to PCBNew.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8135
2021-04-12 11:11:11 +01:00
2cba64b258
Fix missing env var expansion in pos file generation.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8178
2021-04-12 10:17:42 +01:00
34ea6891b0
Formatting.
2021-04-12 10:17:42 +01:00
675ec70f0f
PANEL_SETUP_BOARD_STACKUP: fix a wxassert due to a "C" locale test in a format function.
...
A call to FormatInternalUnits() was made without switching to "C" locale.
In this case it was not necessary, but FormatInternalUnits() expects in some tests
this locale, thus creating issues (assert and incorrect conversion)
Fixes #8177
https://gitlab.com/kicad/code/kicad/issues/8177
2021-04-12 09:57:40 +02:00
49a91414d7
PNS: Apply co-linear seg merging to drag operations
2021-04-11 22:32:11 -04:00
1c431d9929
PNS: Fix some off-by-one errors with arc dragging
2021-04-11 22:12:53 -04:00
a26fc6d65d
PNS: Fix several issues with arc dragging
...
Do not merge vertices that belong to different arcs
Fix start segment identification after arcs
Fix free-angle drag after arc
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8173
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8150
2021-04-11 17:56:40 -04:00
7d58c53e42
Apply new hole-dimming logic to via pads.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8144
2021-04-11 17:51:38 +01:00
2cde76a191
Don't do any hole clearance testing within a single footprint.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8141
2021-04-11 16:03:16 +01:00
7ba110bd77
PNS: Fix dragging of segments with arcs in line
2021-04-11 10:18:57 -04:00
a30894e5a1
Allow SHAPE_LINE_CHAIN and SHAPE_ARC to be mirrored using a SEG
2021-04-11 13:27:25 +00:00
fe8fbf1d5d
Use arcs instead of line approximation for Miter shape
...
TODO:
* The resulting line chain is broken with the arcs, and
this appears to be some subsequent issue I was not able to pin down.
* The requirement of a correction factor is not clear to me
2021-04-11 13:27:25 +00:00
cc956695ae
Hit test for worksheet before adding Properties to menu.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8171
2021-04-11 14:18:35 +01:00
6072f5831b
Apply uniform spacing to orientation controls.
2021-04-11 10:33:26 +01:00
29e5882637
Fix typo (found by Coverity).
2021-04-11 10:32:15 +01:00
675444a646
Dim hole walls that don't pass through high-contrast layers.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8144
2021-04-10 22:41:38 +01:00
5c448057c8
PNS: Prevent state flicker when starting drag
2021-04-10 16:31:39 -04:00
7784d7cb12
PNS: Fix visible area restriction
...
VIEW::GetBoundary() returns the entire view area, not the visible area.
Surprisingly, we had no API for this, so I added one.
Also, changed the dragger behavior to toggle between optimizing just the
modified area and optimizing the visible area, i.e. we will now never
optimize off-screen portions of the dragged track.
2021-04-10 16:13:08 -04:00
94afdcb92a
PNS: Allow control of area-restricted drag optimization
...
CHANGED: The interactive router settings now include a switch to
enable or disable optimization of the entire dragged track,
which is now disabled by default. When enabled, the router
will reroute the entire track (from the dragged segment to
the closest pad/via in each direction) to be more optimal.
When disabled, only the area around the dragged segment
will be modified.
CHANGED: The "optimizer effort" slider is removed from the interactive
router settings dialog, as this setting did not have any
meaningful impact in most cases and was a source of confusion.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/5918
2021-04-10 15:17:39 -04:00
846e4aed42
Fix selection filter in Edit Text and Graphics dialog
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7966
Fixes https://gitlab.com/kicad/code/kicad/issues/8149
2021-04-10 15:49:23 +00:00
dc0cf3b802
Clean up a confusing API.
...
AllowDRCViolations is kept in any mode as a *setting*, but only
controls router behaviour when the mode is mark obstacles.
Fixes https://gitlab.com/kicad/code/kicad/issues/7795
2021-04-10 11:08:02 +01:00
176fcd43d8
Cleanup.
2021-04-10 10:04:02 +01:00
252fad1cc7
These grids *must* have a border on OSX to render correctly.
2021-04-10 10:04:02 +01:00
f606069bf6
Formatting.
2021-04-10 10:04:02 +01:00
43d8145304
Pcbnew: Snap to the closest point on graphic polygon border
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8164
2021-04-09 22:33:55 +00:00
58dfb6539f
Change orientation and flip sign of dimension height when rotating orthogonal dimensions.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6940
2021-04-09 22:30:18 +00:00
d2c7df155b
Don't show blind/microvia holes on layers they don't appear on.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8144
2021-04-09 17:14:53 +01:00
3450610977
Add ability to allow thermal vias to be implemented as pads.
...
This is mostly just for CADSTAR. Since we don't (yet) have general
purpose footprint attributes, this reuses the "net tie" hack.
Fixes https://gitlab.com/kicad/code/kicad/issues/8141
2021-04-09 14:02:13 +01:00
619a353c5e
Decouple 3D view dirty marking and refresh
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8154
2021-04-08 22:09:19 -04:00
7b3c7e1ef3
Fix some free/delete issues
...
Removes the C-format memory management
2021-04-08 16:58:45 -07:00
9939af3e27
Fix color handling in the stackup manager panel
...
Fixes https://gitlab.com/kicad/code/kicad/issues/5671
2021-04-09 00:56:31 +01:00
401bc53038
Move the DRC constraints page into a scrolled window
...
We seem to be getting a lot of these now, and it was
being cutoff by default - so make it a scrolled window
like the severities.
2021-04-09 00:56:31 +01:00
5490a85f97
Don't recompute the board thickness on UI update
...
The thickness only needs to be computed when the actual
values change, so computing on UI update is a waste of
resources and can cause UI lag.
Fixes https://gitlab.com/kicad/code/kicad/issues/5049
2021-04-09 00:56:31 +01:00
d64de3808f
Pcbnew: Snap to group items
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7694
2021-04-08 23:22:19 +00:00
a8b40bf683
Avoid Clipper when possible.
...
When expanding an error to the outside of a rounded corner pad we
need to trim it to the pad bounding box or else we get little ears
where the circle approximation meets the pad square. This is expensive,
and for clearance lines we don't really care whether the error is
inside or outside.
Fixes https://gitlab.com/kicad/code/kicad/issues/8157
2021-04-08 22:37:14 +01:00
5ea68c7694
Copy some bug fixes from DRC dialog across to Footprint Checker.
2021-04-08 22:37:14 +01:00
4521091cc1
Do not invalidate geometry when all we need is a repaint
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8157
2021-04-08 17:35:51 -04:00
d878cbddbc
PNS: a few forgotten cleanup items
2021-04-07 23:34:45 -04:00
c9040a5c53
PNS: fix some weirdness identified by PVS
2021-04-07 23:16:56 -04:00
e0f26fd525
Make live 3D refresh optional
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8068
2021-04-07 22:39:30 -04:00
d4957b112e
PNS: Keep last valid drag solution in the node
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/5450
2021-04-07 21:59:23 -04:00
26835f582c
Some situations require more than one dummy
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7820
2021-04-07 21:30:18 -04:00
9432484394
PNS: Find origin segment correctly when arcs are present
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8139
2021-04-07 20:28:30 -04:00
18f07024a6
Simplify UI event handling in pcbnew global edit dialogs
...
Instead of enabling/disabling the controls on every possible
UI event in these dialogs, only do it when the actual control
wants to know if it should change status.
2021-04-07 17:39:48 +01:00
1a727558b0
Switch update event handlers to use the event instead of pointers
...
It is safer to use the event to pass the enable/string
instead of pointers, since using the pointers could trigger
other UI events.
2021-04-07 17:39:48 +01:00
29cc16a4c4
Push pcbnew layer alpha change update into base frame
...
This code was shared between the footprint frame and
pcb edit frame, so push it into the base edit frame.
Also remove the dummy wxUpdateUIEvents that weren't
actually being used.
2021-04-07 17:39:48 +01:00
3fd3be9843
Layer fixes for PCBNew drawing tools.
...
1) Implement layer changes for dimension drawing tool
2) Ensure drawing layer is visible for (1) and for the text drawing
tool.
Fixes https://gitlab.com/kicad/code/kicad/issues/8106
2021-04-07 15:02:48 +01:00
e50b450092
Formatting and organisation.
2021-04-07 14:50:29 +01:00
85efdb85b0
CADSTAR PCB: Ensure continuous track routes
...
When route offsetting, add an additional thin track to ensure
end point of one track and start point of the next are at the same
location.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8131
2021-04-07 11:28:02 +00:00
211fd65c23
Move: Ignore mouse up and click events until a mouse move / drag event
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8123
2021-04-06 17:29:52 +00:00
09b2db3139
Test for group in footprint was snagging all footprint children.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8121
2021-04-06 18:27:43 +01:00
9f957d3e08
Fix crash when attempting to tune discontinuous lines
...
Also correctly find the tuning path through arcs
https://gitlab.com/kicad/code/kicad/-/issues/8131
2021-04-06 09:07:11 -04:00
235688e459
Less restrictive Arc Track Dragging tool
...
Use the connecting straight tracks even if not exactly parallel - allow
an error margin configurable in ADVANCED_CFG (default 1 degree). Also
be less strict about end point matching and use the width of the track
as the criteria to determine suitability.
Finally, delete any short lengths of track at the end of the operation
and amend the arc end points to keep connectivity.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7967
2021-04-06 12:52:01 +00:00
0a2c8575ce
ZONE properties: stage commit even if !Settings().m_AutoRefillZones
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8028
2021-04-06 12:52:01 +00:00
69fd0b38ff
Remove a couple of unused OnUpdateUI handlers.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/5049
2021-04-06 13:47:15 +01:00
daaf738c7f
Add save-as files to file history.
...
Also fixes where lock wasn't getting reset on a Save As.
Fixes https://gitlab.com/kicad/code/kicad/issues/8111
2021-04-06 13:35:26 +01:00
b2f788adc1
PNS: Fix UseConnectedTrackWidth when starting from ARCs
2021-04-06 01:27:13 +00:00
e46c9d35ac
Add undo/redo handling to length tuner event loop
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8129
2021-04-05 19:58:14 -04:00
24cd174a23
Don't dereference a possibly-invalid optional
2021-04-05 19:34:57 -04:00
ec45855aed
Make sure drawing layer is visible.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8106
2021-04-06 00:06:23 +01:00
9a764126ce
CADSTAR PCB: Keep all tracks as a single chain where possible
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8119
2021-04-05 20:15:09 +01:00
a6c3d74a73
Pass active layer to StartRouting in length tuner
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7857
2021-04-04 21:51:54 -04:00
a24bc34b66
Better colors for length tuning popup in dark mode
2021-04-04 20:33:59 -04:00
c7ecb51f77
Update PNS length tuning algorithm to match the new BOARD algorithm
...
Now tracks inside pads are optimized to give a more accurate length.
Also, the start/end of the assembled line is used to identify the right
pad joints for pad-to-die length calculation.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/4204
Fixes https://gitlab.com/kicad/code/kicad/-/issues/1765
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6877
2021-04-04 20:27:22 -04:00
41c54d383e
Fix some edge cases with length calculation
2021-04-04 19:38:54 -04:00
cdfb014ab6
CHANGED: Account for via height in track length calculations
2021-04-04 13:59:18 -04:00
80728f8d78
Improve algorithm for calculating net length; use it for netinfo message panel
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/4258
2021-04-04 12:27:09 -04:00
6b24abac8f
PNS: Don't snap to end items if snapping is disabled by modifier key
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8033
2021-04-04 10:22:23 -04:00
52ca7ed27c
Naming conventions.
2021-04-04 10:43:56 +01:00
c1df77f59b
Terminology.
2021-04-04 10:32:24 +01:00
98e6a089ab
Treat board edges same as graphics for locked/unlocked.
...
It would appear that not using the locked/unlocked graphics filters
is confusing too (see deleted comments in code).
Fixes https://gitlab.com/kicad/code/kicad/issues/8114
2021-04-04 10:27:26 +01:00
2c3ee0d85f
Don't forget CommitPendingChanges.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8083
2021-04-04 01:02:31 +01:00
83ae28f04f
Fix selection when pasting/duplicating items
...
The item flags weren't getting reset after placing
the new items, so the next operation on them was
having weird behavior.
Fixes https://gitlab.com/kicad/code/kicad/issues/7528
2021-04-03 19:09:21 +01:00
cb17c9f3dd
Typo fix: Correct various misspelled words
...
agressive -> aggressive
decription -> description
miscellanous-> miscellaneous
rectange -> rectangle
Unkown -> Unknown
2021-04-03 13:39:50 +00:00
8dff3725ac
Typo fix: Correct 'allow to' -> 'allows one to'
2021-04-03 13:39:50 +00:00
52aea0a2c9
Consistent terminology.
2021-04-03 11:15:11 +01:00
c5536b2cab
Title case in menus.
2021-04-03 11:15:11 +01:00
aa09d6448a
Pcbnew: Allow Create Array on groups
...
Also removes possible null pointer dereferencing.
Fixes https://gitlab.com/kicad/code/kicad/issues/7515
2021-04-03 09:06:49 +00:00
a8896ebd73
Don't show leading ratline for unconnected net
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8040
2021-04-02 20:29:25 -04:00
d7a95e2af4
Rotate FP_TEST properly when flipping
...
The angle was `-angle` instead of `180 deg - angle` when flipping top to
bottom.
Fixing that, in turn, created some problems with justification, which
was modified both by `FP_TEXT::Flip()` and `FP_TEXT::KeepUpright()`.
What's worse, `FP_TEXT` has another mechanism for keeping the text
upright: `FP_TEXT::GetDrawRotation()` returns different angles if the
"keep upright" flag is set. But there is no analogous behavior for
justification, so the text would sometimes get shifted, and sometimes
not, depending on which mechanism was engaged. And both are used,
apparently.
Clearly, such an arrangement an open invitation to bugs and
inconsistencies. One of these mechanisms should be removed. I haven't
done this yet, and would prefer to postpone this until V6 is out.
I've fixed the justification problems, but this was by trial-and-error,
and I don't feel I really understand the behavior responsible. But I
think it's a good sign that most of my changes are line removals, not
additions. Flipping is a simple operation, it's just mirroring and layer
change. If something simple has a complicated routine, then it's
probably full of hacks.
Fixes https://gitlab.com/kicad/code/kicad/issues/7289
2021-04-02 21:13:21 +00:00
0a660c2364
Pcbnew: Remove 180 deg rotation when flipping PCB_TEXT in some cases
2021-04-02 21:13:21 +00:00
99fd872fce
Pcbnew: Do not move footprint fields twice in align/distribution tools
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8094
2021-04-02 21:09:36 +00:00
7655533412
Do not move footprint fields twice when performing Move Exactly
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8062
2021-04-02 21:07:59 +00:00
1931677316
Ensure the layer dropdowns are correctly sized
...
On GTK, the layer dropdown was sized based on an empty list,
so for non-default fonts it would be undersized and cutoff
the font.
2021-04-02 21:33:31 +01:00
1db5e2bc96
Don't force an entire refresh of toolbars to update sizes
...
Forcing an entire refresh of the toolbars is wasteful,
so instead just update the sizers directly.
2021-04-02 19:12:21 +01:00
d3bf20e80b
Pcbnew, place free via: take netcode from the pad, if the via is inside a pad.
...
Fixes #8089
https://gitlab.com/kicad/code/kicad/issues/8089
2021-04-02 17:19:44 +02:00
f88d39b4f0
Fix state issue in router's switch layer handling.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7590
2021-04-01 18:10:04 +01:00
f6f31b7654
Get rid of save warning after Footprint Editor Save As.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8084
2021-04-01 11:17:24 +01:00
94470bfa15
Minor cleanup.
2021-04-01 11:10:01 +01:00
0c4184f1a4
Split lib tree initialization into a two-pass affair.
...
This is under the supposition that we can't set the column widths
on some Mac instances because the host controls haven't yet been
created. This is primarily conjecture based on looking at things
that have the *possibility* of going wrong. Why this only happens
in some installs is beyond me.
Fixes https://gitlab.com/kicad/code/kicad/issues/5479
2021-04-01 10:51:29 +01:00
90abc8ba8b
Excellon drill files: slightly change comments inside files
2021-04-01 07:38:00 +02:00
b6f2941a06
Another try a allowing touching courtyards.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8076
2021-03-31 22:54:30 +01:00
a530c22eff
Shorten "Allow free pads" tooltip and rename button "Skip Locked Items"
2021-03-31 18:28:18 +00:00
7077e59395
Make moving pads independent of footprint much harder with new setting
...
It is still possible to move a pad independent of footprint through
the pad properties dialog. This is a much more conscious decision
than using the move tools.
ADDED: "Allow free pads" preference setting in pcbnew, default to off.
When enabled, allows moving unlocked pads independent of the footprint
(i.e. previous behaviour). When disabled (default), any attempt to move
a pad will move the parent footprint instead.
REMOVED: "Lock pads of newly added footprints" preference setting in
pcbnew. (Pad lock state is now loaded from the footprint definition)
CHANGED: There are now only two possible lock states for a footprint:
locked and unlocked. The lock state of the pads in the footprint is
now independent of the footprint lock state.
Also fixed a latent bug that would allow a pad to be moved when the
parent footprint was locked (see m_selectionTool->RequestSelection
lambdas in edit_tool.cpp)
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7739
2021-03-31 18:28:18 +00:00
737262ffa8
Allow touching courtyards.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8076
2021-03-31 10:44:59 +01:00
0a0935e0f3
Remove ACTIONS::TranslateLegacyId and TOOL_DISPATCHER::DispatchWxCommand
...
After commit 9535153f9e
2021-03-30 23:20:22 +00:00
8cb6f15687
Warn when diff pair router can't start due to too-small-gap.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7795
2021-03-30 19:49:23 +01:00
b151dd02b9
CADSTAR PCB: Fix incorrect solder mask/paste clearance
...
Need to divide by two as this is a clearance, not diameter.
2021-03-30 13:03:56 +00:00
ad2043eda6
CADSTAR PCB: DrillXoffset and DrillYoffset are zero when not specified
...
Fixes an issue that resulted in pads being loaded 100nm off from the
original CADSTAR position.
2021-03-30 13:03:56 +00:00
6eb2e2a6e3
Fp editor: do not change item UUIDs when loading a footprint from library.
...
Fixes #8066
https://gitlab.com/kicad/code/kicad/issues/8066
2021-03-30 12:58:22 +02:00
78a60e9dfb
PNS: Put polygon error outside pad shapes
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7672
2021-03-29 19:49:59 -04:00
6cbc3fb97d
Fix a minor inconsistency between router and DRC
...
Also make sure collision highlighting runs at the starting
location of a drag.
See: https://gitlab.com/kicad/code/kicad/-/issues/7672
2021-03-29 19:41:17 -04:00
8be9832153
PNS: Don't highlight Net 0 (the unconnected net)
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8040
2021-03-29 17:45:07 -04:00
38c849bde7
Pcbnew: load write board netlist to file tool action dynamically.
...
Loading this advanced configuration option statically will cause it to
show up in the hotkey list even when the option is disabled. Creating
the tool action at run time resolves this issue.
2021-03-29 09:04:55 -04:00
3c51964c57
drill report: use more digits in float values for diameters.
...
(Use same resolution in map and rpt files)
2021-03-29 13:02:43 +02:00
f2e68e68d0
Add "Hide Tree" context menu options when tree has no selection.
...
Also cleans up some other code to be more consistent between symbol
editor and footprint editor.
Fixes https://gitlab.com/kicad/code/kicad/issues/8052
2021-03-29 12:02:00 +01:00
6d2f80b4cf
Pcbnew: add write board netlist to file support.
...
This is hidden behind an advanced configuration setting and is primarily
useful for developers trying to troubleshoot the netlist payload sent
from the board editor to the schematic editor.
Fixes https://gitlab.com/kicad/code/kicad/issues/8051
2021-03-28 08:38:29 -04:00
475ac3697f
Ensure toolbar controls have the correct width on frame creation
...
Otherwise they could be slightly too small and then look odd.
2021-03-28 13:07:56 +01:00
d0d6352a25
Fix crash launching footprint editor frame
...
Apparently we get this event before the frame is fully-baked
2021-03-27 23:48:07 -04:00
42c6af4bd8
Cleanup ACTION_MENU creation in some places
...
The ACTION_MENU constructor now takes the tool as an argument,
so the call to SetTool() immediately following it can be removed
and the tool just passed into the constructor.
2021-03-27 19:16:58 +00:00
9535153f9e
Move the import graphics menu item to the action
2021-03-27 19:04:16 +00:00
7bfa8575fa
Remove redundant information from import/export menu item labels
...
Saying "Import/Export" on the labels when the submenu has "Import"
or "Export" in it is redundant.
Note that we can't just update the action text with the new name,
because that is used in the hotkey list and would become too confusing
without the "Import"/"Export" text.
2021-03-27 18:50:35 +00:00
eb8744816e
pcbnew: fix the i18n of the rules syntax help
2021-03-27 16:26:13 +00:00
f6041fb52d
Force update of some text when activation status changes
...
The text areas aren't always redrawn when the window is activated
or deactivated, so we need to force a refresh of the text to ensure
it is the correct font color.
2021-03-26 15:50:56 +00:00
d18323dcf0
Excellon file writer: remove not very useful comments outsider the header section.
...
Looks like comments outside header section can create problems in some readers.
Note: comments inside header section are clearly allowed in Excellon file format)
(trial to fix bug 8032)
2021-03-26 09:46:32 +01:00
132ec37b56
Handle arc in buildHullForPrimitiveShape
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8008
2021-03-25 21:25:30 -04:00
34a435cd56
CADSTAR PCB: Handle import of pads with different paste and mask sizes
...
KiCad doesn't yet support full padstacks, but at least we can use the
solder mask / solder paste expansion to import a better result. Also
we can disable the specific layer if the shape has a size of zero.
2021-03-25 17:54:56 +00:00
107a1990c9
CADSTAR PCB: Handle route offset
...
The CADSTAR post processor has a peculiar feature called "route offset"
which effectively shortens tracks when the pad, track or via that it
connects to has a smaller width. This operation is not saved in the
design itself, but applied as a post processing operation meaning that
the importer has to apply it when loading on the board.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6648
2021-03-25 17:50:33 +00:00
1468764f83
CADSTAR PCB: Lock footprint pads after import
2021-03-25 17:50:33 +00:00
3279e295ac
Don't start filling zones with possibly stale caches.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8014
2021-03-25 17:20:08 +00:00
a2ffb45698
Update diff pair rule syntax to be clearer.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8010
2021-03-25 10:29:38 +00:00
bbd7b4ca8c
Eeschema, selection tool: uniformize the cursor shape and the actual modifiers.
...
SHIFT, CTRL, ALT modifier keys were handled in 2 different codes, one for
the selection tool and another to modify the mouse cursor shape, with 2
different configs.
Now the modifiers are managed from only one function.
Pcbnew: group also SHIFT, CTRL, ALT modifier keys management to a specific function.
Fixes #8021
https://gitlab.com/kicad/code/kicad/issues/8021
2021-03-25 10:28:20 +01:00
9a0f9575b6
Fix minor Coverity warnings
2021-03-25 09:12:24 +01:00
41839f7e3f
Update panel_setup_rules_help.md diff pair clearance example to use new A.isCoupledDiffPair() function
2021-03-25 03:33:19 +00:00
cb722c6bfa
Code style
2021-03-24 18:11:32 -04:00
75819206a0
Add support for dark theme in plugin icons
...
Action plugin authors can specify alternative icon path for dark theme.
If it's not specified then standard icon will be used for both light and
dark themes. If neither icon is specified then the default puzzle piece
icon is used.
Fixes #7984
2021-03-24 21:59:30 +00:00
b37b7d53b4
Fix geographic annotation bug when back annotating to schematic.
...
For some reason, the footprint UUID was being prefixed to the sheet path
which caused the symbol look up by sheet path to fail. An option was
added to not do this when the geographical back annotation to the schematic
is performed.
2021-03-24 09:57:36 -04:00
e409b04538
More gracefully handle tinyspline not liking a spline definition
...
Partial fix for #6634
2021-03-24 00:37:01 -04:00
f57dcf2a34
Fix connectivity to only resolve conflicts on netlist load
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8007
2021-03-23 17:43:24 -04:00
a94ce75c02
Fix multiple filter calls that were producing false cache positives.
...
When processing a compound shape we'd decide the first of them didn't
collide and then put false into the cache. The cache value would then
be used for all the other shapes in the compound shape, which very well
might actually collide.
Fixes https://gitlab.com/kicad/code/kicad/issues/8003
2021-03-23 21:06:16 +00:00
a94a481574
Fix compile warnings
...
Some simple warnings and also a deprecation warning from wx
because they felt that a function should be renamed...
2021-03-23 19:46:49 +00:00
4dbeb15024
Use a worker thread to send socket commands
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6503
2021-03-23 03:20:40 +00:00
381cc27548
Add missing include
2021-03-22 21:25:03 -04:00
49b1aceb8b
Handle doc urls enclosed in parens.
...
It seems this has become a common pattern in at least some of our
libraries.
Fixes https://gitlab.com/kicad/code/kicad/issues/7963
2021-03-22 21:20:54 +00:00
f24f0d93a5
Make OK default in inspectors (and hook up to close window).
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7831
2021-03-22 21:20:54 +00:00
a677998f47
Don't select new items after cancelling move following item duplication
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7956
2021-03-22 18:49:43 +01:00
9ce34102af
Make sure projects get created for boards migrated from 5.x
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6886
2021-03-21 16:21:44 -04:00
8be213e36f
Trim includes (and use consistent terminology in error messages).
2021-03-21 20:15:47 +00:00
a9eb83201e
Remove ZONE::ClearFilledPolysList() and fix ZONE::Unfill()
...
ClearFilledPolysList is redundant and Unfill() was missing the clearing
of m_insulatedIslands
This fixes potential latent bugs in zone unfilling.
2021-03-21 20:13:20 +00:00
50aafb9d2a
Do not auto-refill zones when added or edited
...
The only exception is when using the Zone Properties Dialog and
user preference is enabled
2021-03-21 20:13:20 +00:00
7a255edc5f
Panel Edit Options: Fix "Show Page Limits" tooltip message
2021-03-21 20:13:20 +00:00
f6c4677189
ADDED Option to disable automatic zone filling in pcbnew
...
The new setting is stored as 'editing.auto_fill_zones' and controls
whether zones should be refilled after certain actions or not.
2021-03-21 20:13:20 +00:00
a743e0c52b
Add Zone fill to undo stack
...
Allows undoing zone filling and reverting to previous fill state.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7440
2021-03-21 20:13:20 +00:00
5e0b65c3a8
Change wording of corner rounding action
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/4505
2021-03-21 15:55:56 -04:00
37242f67e0
Connectivity: just pick the most popular net to update conflicting clusters
...
CHANGED: when pad net assignments are changed in a conflicting way (i.e.,
tracks exist that short out more than one net after the change,
track nets will be updated to the net with the most pads).
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7929
2021-03-21 15:31:37 -04:00
f0ed5fab39
add missing include for wxWidgets 3.1.4
2021-03-21 17:35:20 +01:00
e1840ccbd3
Handle exceptions thrown by footprint library table
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7973
2021-03-21 11:43:24 -04:00
68f3d09ac1
altium: introduce tokenizer for query language
...
Based on this tokenizer, a LL1 parser will be built in the future.
2021-03-21 16:39:23 +01:00
fe196771d8
Implement isCoupledDiffPair() DRC rule function.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7975
2021-03-20 23:07:36 +00:00
44e2151ade
Allow diffpair gap to override netclass clearance value.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7975
2021-03-20 21:53:30 +00:00
ce46fe6581
Add insideFrontCourtyard and insideBackCourtyard DRC functions.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7972
2021-03-20 21:53:30 +00:00
07aea4339d
Formatting.
2021-03-20 21:53:29 +00:00
4a53917efa
wrml exporter: optimize circle to segment approximation.
2021-03-20 18:16:58 +01:00
f1c599fa4d
Tweak PCB selection behavior to reduce unintuitive behavior
...
We were discarding shapes too aggressively for having a
larger area than a shape underneath.
Let's also try showing fewer disambiguation menus, in particular
always preferring items on the active layer when the candidates
include overlapping items of similar area on other layers.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7949
2021-03-20 13:11:51 -04:00
6924b98bc3
Remove deprecated BRIGHT_BOX preview item
2021-03-20 12:09:20 -04:00
c04e19f9ac
Include optimization: move some things from common.h to point-of-use
2021-03-20 12:09:18 -04:00
6d5536707c
wrml exporter: remove all duplicate code with Pcbnew. Especially, converting layers to polygons exist in Pcbnew, so no need to rebuild item shapes in the exporter. Moreover, in exporter, rebuilding shapes was not up to date and did not include changes in Pcbnew.
2021-03-20 13:44:52 +01:00
4073153e75
vrml exporter: fix incorrect export of zones on solder mask layers. minor changes in colors.
2021-03-20 11:13:55 +01:00
7a8abcadd2
PCB_SHAPE: Use SHAPE_ARC as the effective shape of an arc
2021-03-19 22:43:43 -04:00
6c3b02aabe
Cleanup (no functional changes).
2021-03-19 16:14:34 +00:00
3fec3a3a15
Fix a minor Coverity warning
2021-03-19 15:01:16 +01:00
90742bba9f
Adjust constraints after editing other points.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7103
2021-03-19 11:35:17 +00:00
4034fcb7ac
Fix yet another edge case in B&W printing of holes.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7944
2021-03-18 23:50:04 +00:00
af88b01068
export_vrml: Better export of pad shapes, both on copper and paste layers.
...
It removes duplicate code between Pcbnew and the vrml exporter.
Remove also an useless option (plain board) that exported just the board body.
2021-03-18 20:43:27 +01:00
8d5161dae2
export_vrml: more code cleanup and export solder mask
2021-03-18 16:44:28 +01:00
95051c4786
Also duplicate arcs in pcbnew
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7943
2021-03-18 13:35:30 +00:00
e377f2667e
Adding COMMIT support before/after invocation of a python script
...
Allows undo/redo of ACTION_SCRIPT commands
2021-03-18 12:52:17 +00:00
16ef1910ff
export_vrml: more code cleanup and fix incorrect shape of round chamfered pads
2021-03-18 13:35:06 +01:00
074f0432f0
vrml exporter: more cleaning code and enhancements. Dialog exporter: Add option to use board center as coord origin.
2021-03-18 09:52:04 +01:00
b050823c98
export_vrml.cpp: mainly clean code and add some fixes.
2021-03-18 09:52:03 +01:00
36259b1f6b
Refresh lib trees after editing library tables.
...
Also make sure that we grab the library item descriptions from their
source rather than just the cached tree copy.
Fixes https://gitlab.com/kicad/code/kicad/issues/7875
2021-03-17 14:54:18 +00:00
46d71f0d23
Go back to validate-on-OK, but stop doing design checks.
...
If we keep doing design validations at two different places, they can
only start to drift apart. Board Setup should validate for malformed
data ONLY; everything else is the business of DRC.
This also fixes a bug where implementation validations would not allow
OK in the dialog, but wouldn't put up a message to say why. We now use
the InfoBar impl from Jon's commit for that.
2021-03-16 14:49:03 +00:00
bb8d31cd06
Fix context item selection filter type omissions
...
Fixes #7839
2021-03-16 13:08:50 +00:00
cad1cb0262
Improve naming.
2021-03-16 12:07:06 +00:00
c7648b4dba
Formatting.
2021-03-16 12:07:06 +00:00
2ad9da582a
Refresh geometry when clearance changes if clearance lines are shown.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7906
2021-03-16 12:07:06 +00:00
c3c3649211
Stop text from causing a shift during flip when >1 items are selected
...
1e1be730https://gitlab.com/kicad/code/kicad/issues/7304
2021-03-15 21:24:16 +00:00
b2ac9cc29f
Formatting & naming conventions.
2021-03-15 19:04:59 +00:00
a086795ac9
Pcbnew: fix dimensions text rotation and position.
...
Issue #6940 is not addressed, as being able to
rotate a dimension with a group is preferred over
easily rotating the text.
Fixes https://gitlab.com/kicad/code/kicad/issues/3847
2021-03-15 15:44:36 +00:00
cb451dc4b2
Pcbnew: Fix memory leaks and fix inefficient code.
2021-03-14 20:27:59 +01:00
52e2bf0000
Keep focus on filter boxes in footprint viewer
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/4884
2021-03-14 15:10:20 -04:00
a1b4bcc210
Refinements (add icons to menuitems and better help strings)
2021-03-14 18:44:31 +01:00
c763b0088e
Fix some issues in drawing_stackup_table_tool.cpp
2021-03-14 17:44:16 +01:00
Jeff Young
Seth Hillbrand
Jon Evans
jean-pierre charras
Dominik Sliwa
Wayne Stambaugh
Roberto Fernandez Bautista
Stefan
qu1ck
Ian McInerney
david-beinder
Anton Lazarev
Pradeepa Senanayake
luz paz
Marek Roszko
RigoLigoRLC
Thomas Pointhuber
Fabien Corona
Eeli Kaikkonen
Michal Schulz
Mikolaj Wielgus
luz paz
Johannes Maibaum
Tomasz Wlostowski
Jean-Samuel Reynaud
Simon Richter
Allan Nordhøy
Jonathan Haas
Adam Wolf
Carsten Schoenert
Konstantin Baranovskiy
firebladed
pgvoorhees
Fabien-B