01f8628aed
Bugfix in detecting BMP probes by usb serial number.
2020-12-11 18:36:48 +01:00
170fe0c368
Remove spurious comment.
2020-12-11 18:36:16 +01:00
4c5ce0b16a
Hosted: Handle devices w/o serial number, e.g. GigaDevices GD-Link ARM/CMSIS-DAP
2020-12-11 18:36:16 +01:00
0f1fe9e438
hosted/linux: Find BMP devices without libusb.
2020-12-11 18:36:09 +01:00
bd5f4c6ed5
hosted: Consolidate ident output.
2020-12-11 17:55:31 +01:00
0870b778c0
hosted: Allow to build without libusb, libftdi and hidapi with HOSTED_BMP_ONLY=1
2020-12-11 17:50:16 +01:00
32db38ecf2
hosted/libusb: Move platform.c libusb related functions to own file.
2020-12-11 17:35:43 +01:00
41788f923b
ftdi/stlink/jlink: Provide dummy functions in the HOSTED_BMP_ONLY case
...
Do not allow multiple inclusion by not declaring the functions as static to
help keep code clean.
2020-12-11 17:31:25 +01:00
98b4ec58bc
Update to recent libopencm3 to undo unwanted change.
2020-12-07 21:51:22 +01:00
633c6a2e81
Recognize "J-Trace Cortex-M PRO V2" in hosted mode
2020-12-07 11:52:33 +01:00
17dfec3572
dfu/cdcacm: Consolidate usage of ST vs BMP serial number.
2020-12-06 15:18:08 +01:00
5c7e0eedb0
command.c: Consolidate "mon version" output
2020-12-06 15:18:08 +01:00
07c3699225
version.h: Remove from platform.h files
...
- Consolidate ident string generation
- Recompile only needed files
2020-12-06 15:18:08 +01:00
dd6aadc54d
jtag: Add verbosity about devices found.
2020-12-06 15:18:08 +01:00
0a7bfd5923
dfu_f4: Fix sector_erase.
2020-12-06 15:18:08 +01:00
e318f884bf
Change the type of 'cortexm_wait_timeout' to unsigned.
...
It makes sense that the timeout value is unsigned, it also
resolves build errors on some platforms.
2020-12-04 11:44:50 +01:00
c9a419e44b
Correct loss of sync protocol error #787
2020-12-04 11:33:23 +01:00
e3fd12ebc6
gd32f1/f3 detection and ram/flash autoset
2020-12-03 11:16:47 +01:00
575c25e570
Add support for STM32F1 clone with new AP_DESIGNER id
2020-12-01 10:23:16 +01:00
48a79ff9da
adiv5: More checks for a sensible DPIDR.
2020-11-29 21:11:11 +01:00
752bc26536
adiv5: Fix memleak with duplicated base.
2020-11-29 21:11:11 +01:00
acec489647
adiv5_jtagdp: Always set idcode.
2020-11-29 21:11:11 +01:00
9e1b7fdac0
jlink/swd_low_access: Fix data direction during response read phase.
2020-11-29 15:48:50 +01:00
8903026c14
jlink/swd: swd frequency is fixed, not need to set.
2020-11-29 15:48:50 +01:00
f45c56af83
adiv5/swdp: Check early for valid DP idcode.
2020-11-29 15:48:50 +01:00
3b6432912d
jlink: Catch another error with no target connected.
2020-11-29 15:48:50 +01:00
7df314e265
Firmware/Jlink: Fix double free when debug power-up fails ( #780 )
2020-11-29 15:48:50 +01:00
e1329499de
platform_adiv5_swdp_scan: Do not double free with early errors.
...
adiv5_dp_init() clean up itself if errors happen
2020-11-29 15:48:50 +01:00
bf548e92c0
swd: After write low_access, always append 8 clk to move data through SW-DP.
...
Especially needed when leaving the debugger or during debug unit power-up.
ARM Debug Interface Architecture Specification ADIv5.0 to ADIv5.2
tells to clock the data through SW-DP to either :
- immediate start a new transaction
- continue to drive idle cycles
- or clock at least 8 idle cycles
Implement last option to favour correctness over slight speed decrease
Implement only for adapters where we assemble the seq_out_parity in our code,
as on firmware, ftdi and jlink. Hopefully the high level adapters do it right.
Reverts 2c33cde63fcde7726b87
2020-11-27 22:26:48 +01:00
139e5d7e22
f4discovery: Compile time option to compile with ST bootloader
...
Just to keep things active. Prepare for F72 bootloader.
2020-11-27 22:26:48 +01:00
636bcee355
stlink/swlink: Remove the DFU upgrade utility.
...
Hopefully no old bootloaders are around. If otherwise, revert to last
commit before this and update the DFU bootloader.
2020-11-27 22:26:48 +01:00
27ef4569ca
stm32/dfucore.c: Use libopencm3 provided defines and functions.
2020-11-27 22:26:48 +01:00
9d55128ab8
cl_utils: Get voltage only once.
2020-11-27 22:26:48 +01:00
e6823f39de
Hosted: Print version with "-h" and "-t" option.
2020-11-27 22:26:48 +01:00
3ee31473c6
cortexm.c: LPC15xx has designer 43b and Partno 4c3
...
Thanks to JojoS!
2020-11-27 22:26:48 +01:00
62d9f60f03
hosted/firmware: Waits for read response as long as cortexm_wait_timeout.
2020-11-27 22:26:48 +01:00
26a23dd1cb
stlinkv2: Try harder to open an AP.
...
Problem seen on STM32L0 with probably long sleep periods.
2020-11-27 22:26:48 +01:00
19e1fddba2
adiv5: Remove unnescessary read.
2020-11-27 22:26:48 +01:00
cda83d3084
Fix memleaks.
...
Happened e.g. when Stlink could not enter debug or when cortexm_prepare timed out.
2020-11-27 22:26:48 +01:00
9ac5adfcef
adiv5: Additional decoding.
2020-11-27 22:26:48 +01:00
d78d7838d3
stm32f1: Always read DBGMCU_IDCODE for t->idcode ( #770 )
...
At least STM32F042 has 0x440 as romtable partno vs 0x445 as DBGMCU_IDCODE.
Thanks to Andrey Melnikov(aam335) for pointing out!
2020-11-27 22:26:48 +01:00
653d486ee2
cortexm: Store CPUID in target structure.
2020-11-27 22:26:48 +01:00
824a1d8abc
hosted/find_debuggers: Do not check hubs. Print class of devices unable to open.
2020-11-27 22:26:48 +01:00
e68dd25813
cl_utils: Clarify -d option is BMP/firmware only and deprecate -d.
2020-11-27 22:26:48 +01:00
f71e18948a
GPIO for SWD: Slow down edges on more platforms.
2020-11-27 22:26:48 +01:00
80154c5c7a
adiv5_swdp: Fix more memory leak.
2020-11-27 22:26:48 +01:00
35bcb4f7c6
Switch on the lpc546xx target
...
Enable the lpc546xx target. Tested on the LPCXpresso54628 dev board,
able to flash and debug.
2020-11-24 21:32:39 +01:00
e9c02296f2
target: kinetis: add S32K118
...
This adds support for the NXP S32K118. This is an automotive-grade part
that is derived from the Kinetis line, so it has a very similar
interface to other parts in the family.
Signed-off-by: Sean Cross <sean@xobs.io>
2020-11-14 13:06:23 +01:00
f18be6ef7a
Add support for Kinetis K12 and placeholders for other K-series MCUs
2020-11-07 12:44:05 +01:00
2c33cde63f
cortexm.c/cortexm_halt_resume: Add some clock cycles to always get CPU going ( #768 )
2020-11-01 21:53:23 +01:00
d75f3124b9
ftdi_bmp.c: Reapply fix from #715 : Check for libftdi 1.5
2020-11-01 12:09:27 +01:00
99142d1c0e
Add documentation details for building PC-hosted BMP in msys2.
2020-11-01 11:33:54 +01:00
1f7a716710
adiv5.c: Run cortexm_prepare on all suspected CortexM instances.
...
Gets all debug units of the second CPU of a STM32H745 visible.
2020-10-23 09:40:15 +02:00
18673d9a56
adiv5: Rework DP/AP refcounting.
...
ASAN non longer reports leaks with the STM32H745.
2020-10-23 09:40:15 +02:00
f76a7c4e92
adiv5: Release devices after scan.
...
Before, scanning only kept device stopped until POR or attach/detach cycle.
2020-10-23 09:40:15 +02:00
73e6b540b2
command: When debug channel is available, print morse messages readable.
2020-10-23 09:40:15 +02:00
776861c6a0
Makefile: Fix version.h generation for make all_platforms
...
Same fix as 0ae65cc10f
2020-10-23 09:40:15 +02:00
80ddafc2f8
Jtag/High Level : Transfer dp->dp_jd_index with every HL command.
...
- Add REMOTE_HL_VERSION, now at 1. Fall back to hosted/low-level
when wrong version is found and give hint to user.
2020-10-23 09:40:15 +02:00
59dc1b7eb4
cortex-m7: Give hint about buggy core revision.
2020-10-23 09:40:15 +02:00
976c763747
jtag remote: Start fixing handling M0 (second jtag) for LPC4322 in high-level
...
- LPC11: Only print none-null unknown idcodes.
2020-10-23 09:40:15 +02:00
0995fe1288
cmsis-dap: Various fixes
...
- decrease report size to 64, otherwise MIMRXT10x0-EVK crashed when
reading larger memory block
- dp_read_reg acts direct, fixing CortexM core register read.
- length of data to write with read_block.
2020-10-23 09:40:15 +02:00
f15b1d7763
cl_utils: Clip opt_flash_start only when not set.
2020-10-23 09:40:15 +02:00
c161521c26
cortexm: Designer ARM must be in the default path when probing.
2020-10-23 09:40:15 +02:00
cdd07544d5
Cortexm: Allow pure debug on devices not yet handled for flashing
...
- Recognize STM32L552 and MIMXRT10XX
- Fix another PIDR
- Fix bad debug print string.
2020-10-23 09:40:15 +02:00
3270138ec2
Revert 69e577c9243ce027b628e96881ce2416213fef43
...
What was thought to be a typo is apsel = 0xff for a dp access.
2020-10-23 09:40:15 +02:00
77c4f9d702
stlink: Rework README.md
...
- Document flashing BMP Firmware and reverting to ST firmware
- Consistant nameing
2020-10-19 14:13:29 +02:00
9cd3193a89
bmp_remote.c: Fix bug introduced with 8b929c12c9.
2020-10-17 12:49:37 +02:00
0ffb4f7b18
cortexm: Fix protected SAM detection
...
- Only run cortex_prepare() if reading cidr fails
- With Atmel DSU detected, run cortexm_probe()
2020-10-17 12:49:37 +02:00
5bc743d221
samd: Propagate security after setting security by chip reset.
2020-10-17 12:49:37 +02:00
8b929c12c9
hosted/jtag: Transfer jtag_devs to firmware.
2020-10-16 20:03:03 +02:00
3d92b82678
jtag: Use index and not device structure for jtag_dev_write_ir and jtag_dev_shift_dr
2020-10-16 20:03:03 +02:00
6e2a074064
bmp_remote: Deny high level JTAG for now.
...
jtag_devs and jtag_dev_count needs to be known on th firmware side
and remote_dp->dev needs to be filled with jtag_dev_t.
2020-10-16 20:03:03 +02:00
0f5fb6b9a0
remote: Initialise dp_read and low_access with SWD_INIT.
...
Before "mon s" after "mon j" failed.
2020-10-16 20:03:03 +02:00
752d14ca3e
remote.c: Add comments.
2020-10-16 20:03:03 +02:00
ba26adce53
remote.h: Remove typo.
2020-10-16 20:03:03 +02:00
7ccf0d3e03
jtag_dev_t: Make dev, idcode and desc less generic.
...
No codechange intended.
2020-10-16 20:03:03 +02:00
87b546777a
nrf51: Be more verbose about the protection status.
2020-10-16 12:16:33 +02:00
4108b649c2
stm32h7: Add support for new product lines
...
Add support for:
* STM32H7B3/B0/A3 (RM0455)
* STM32H723/33/25/35/30 (RM0468)
Successfully tested with:
* STM32H7A3ZIT (RM0455)
* STM32H747XIH (check for regressions)
2020-10-10 22:09:34 +02:00
817c62d7fd
Merge pull request #507 from UweBonnes/cortexm_romtable
...
Cortexm romtable
2020-10-08 10:53:17 +02:00
877b4be8ee
cortexm: Restrict probing by using the ap_designer.
...
More designers need to be observed and reported by users and added.
Request users to send needed data.
2020-10-07 20:12:35 +02:00
91d1ef8bf6
target/stm32: Use t->idcode with probe.
2020-10-07 20:12:35 +02:00
44bfb62715
Adiv5: Print Designer/Partno when device is not recognized
...
t->idcode is now 16 bit.
2020-10-07 20:12:35 +02:00
c456fc7f61
adiv5: Store AP designer and partno in the AP structure.
2020-10-07 20:12:32 +02:00
159196c2ad
Cortexm: Remove forced_halt.
2020-10-07 20:11:33 +02:00
9bb2807706
adiv5/romtable: Prepare CortexM devices to read the ROMTABLE
...
It seems, writing to DHCSR fails silent when the device is sleeping.
Reading DHCS during sleep may return nonsense.
Repeated write may at some point catch the device running and succeed.
With devices sleeping for long time and running on faster clock the
chance for a successful hotplug gets smaller.
- Try hard to halt a sleeping device
- Prepare vector catch and enable all debug units by TRACENA
- Release reset
- Apply device specific fixes
-- STM32F7: Store old value of DBGMCU_CR, enable debug in sleep in
DBGMCU before reading PIDR and restore DBGMCU on detach.
Signed-off-by: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de>
2020-10-07 20:11:17 +02:00
a254bc6308
Fix icdi usb error https://github.com/blacksphere/blackmagic/issues/740 https://github.com/blacksphere/blackmagic/pull/748
2020-10-07 18:08:04 +02:00
ceaee2a11e
hosted: Hint about BMPs in bootloader mode.
2020-10-07 17:12:22 +02:00
dc8924a2bc
stm32h7: Don't tc_printf from flash functions ( #747 )
...
* stm32h7: Don't tc_printf from flash functions
Receving an 'O' packet while flashing confuses GDB and then
weird stuff happens.
* Replace tc_printf with DEBUG_WARN
2020-10-05 10:45:18 +02:00
9bba3165fb
swdptap: Turnaround immediate after a reading with parity.
...
Thanks to JojoS.
Probably mostly cosmetic, but is keeps the device from driving SWDIO
until the next commands.
2020-10-02 10:51:14 +02:00
4d18496a6f
hosted: Allow to disable high level commands for BMP.
...
Useful for tracking low level problems on native with hosted.
2020-10-01 15:49:21 +02:00
014abf6cc9
adiv5.c: Reduce number of errors if reading cidr fails.
2020-10-01 15:33:28 +02:00
be40d2b851
adiv5: Check Debug Base Address early
...
Reduces printout when scanning the romtable
2020-10-01 15:22:17 +02:00
747336e927
f4discovery: Slow done JTAG pin slew rate to avoid ringing #742
2020-10-01 15:06:16 +02:00
38bc5bbf82
Add LPC546xx support #741 #553
2020-09-30 12:56:53 +02:00
2fdd94adeb
STM32F7: Add another missing Arch ID.
2020-09-24 16:20:34 +02:00
0ae65cc10f
src/Makefile: Fix version.h generation.
...
It seems, some git behaviour change got by unnoticed.
2020-09-22 19:02:26 +02:00
61d919c1ac
libftdi: Remove no longer needed workaround for travis CI.
2020-09-20 14:10:37 +02:00
77231e8972
serial_no: Fix error with "mon trace" #732
...
launchpad-icdi: Allow to set a serial number with make
2020-09-20 13:23:52 +02:00
bdb351a6ea
adiv5_swdp: On ACK_FAULT, error() and try again once #731
...
when writing CSW.
2020-09-18 20:07:32 +02:00
a4a934f461
Add comments for hardware revision of v2.1
2020-09-17 11:54:19 +02:00
75b5e72a00
Fix typo
2020-09-16 18:41:56 +02:00
de01a75ca9
Fix broken link to bluepill pinout.
2020-09-15 20:58:10 +02:00
6d18a61b2e
hosted: Make ASAN build optional.
...
Use ASAN=1 on the make command line to activate,
2020-09-11 15:23:13 +02:00
120b3134bb
Add SAM4SD32C/B support.
2020-09-07 17:36:15 +02:00
8289862b55
gdb: Reset flash_mode with when erase or flash fails.
...
Thanks to Dave Marples <dave@marples.net>, extracted from #607
2020-09-04 15:17:29 +02:00
58281ec232
SWD Timing: Enhance SWD high time with low speed loss.
...
On F103 no high time < 80 ns and no low time < 100 ns was seen with a scope
2020-09-04 14:45:34 +02:00
af3480e523
hosted: Update Readme.md
2020-09-04 11:49:13 +02:00
6650831243
ftdi: Get turtelizer (JTAG only FT2232D dongle) going
...
FT2232D seems to dislike "Set TCK/SK Divisor" or
"Set Data Bits Low Byte" as first command on a non-first run
- Add printout when garbage is found
- Add "Disconnect TDI to TDO for Loopback" as first MPSSE command
(seemed to help!)
2020-09-04 11:49:13 +02:00
74b3baad1e
ftdi_bmp : Another size fix and small rearrangement.
2020-09-04 11:49:13 +02:00
aeb97466b9
libftdi: Automatically switch to JTAG if SWD is not possible.
2020-09-04 11:49:13 +02:00
ae8cb8ab46
ftdi_bmp: Reject writes with no data.
...
Pending transfers made the MPSSE behaviour strange and unpredictable.
2020-09-04 11:49:13 +02:00
c41ab1738e
ftdi/swdptap: Use parity builtin. Fix array width.
2020-09-04 11:49:13 +02:00
34d0f8a2a1
ftdi: Recognize bitbang SWDIO settings.
2020-09-04 11:49:13 +02:00
6ac0a25123
ftdi: Add UM232H as probe.
2020-09-04 11:49:13 +02:00
d73a6a3d29
platform/ftdi: Do not double initialize.
2020-09-04 11:49:13 +02:00
f0b0639189
ftdi: Output wire debug.
2020-09-04 11:49:13 +02:00
e95e5e3fba
ftdijtag: Really enable TMS/TCK/TDI driver.
2020-09-04 11:49:13 +02:00
f4eed249eb
hosted/ftdi: Allow to list supported cables.
2020-09-04 11:49:13 +02:00
8a2bce26f2
Hosted: Fix memory leak when platform_swdptap_init fails.
2020-09-04 11:49:13 +02:00
7b497302c0
hosted/ftdi: Autodetect ftdi cables with distinguishing feature.
2020-09-04 11:49:13 +02:00
a83e76bef9
libftdi: Add USBMATE.
2020-09-04 11:49:13 +02:00
c78066255d
libftdi: Infrastructure to test for target voltage present.
2020-09-04 11:49:13 +02:00
aff624b6e0
libftfdi: Allow to specify external resistor SWD connection.
...
More explanations in src/platforms/hosted/Readme.md
2020-09-04 11:49:13 +02:00
eabf45357d
libftdi: Reinitialize pins when switching JTAG/SWD.
2020-09-04 11:49:13 +02:00
05534e9b49
libftdi/swdptap: Provide SWD using generic MPSSE if hardware allows.
2020-09-04 11:49:13 +02:00
40ba261982
libftdi: Use asynchronous transfers if header indicate newer libftdi1.
...
This is a hack to keep travis happy. Setting up travis to use a recent
libftdi1 is a major issue.
2020-09-04 11:49:13 +02:00
9b6e19785e
Implement SRST for libftdi.
...
Travis GCC needs -Wno-missing-field-initializers or will otherwise warn.
2020-09-04 11:49:13 +02:00
dea4be2539
Add ifdef to check for libftdi 1.5 to use ftdi_tcioflush instead of ftdi_usb_purge_buffers
2020-08-21 13:10:55 +02:00
7e1b0321e2
Cleanup Makefiles for hosted bmp on darwin
2020-08-21 11:28:17 +02:00
5908fc2da1
Add serial auto-connection to darwin target
2020-08-21 11:28:17 +02:00
e75eb19d78
cmsis_dap: Detect CMSIS-DAP before STLINK
...
Debugger may be realized with the ST USB Vendor ID.
2020-08-16 15:20:58 +02:00
998a9747f8
cmsis_dap: Make some errors more prominent.
2020-08-16 15:20:58 +02:00
c97c4a0960
hosted: Better decoding for ap_decode_access().
2020-08-16 15:20:58 +02:00
badff20099
cmsis_dap.c: Fix dap_dp_read_reg.
2020-08-16 15:20:58 +02:00
f65afb1588
Use correct IAP entry address for LPC84x
2020-08-14 20:00:18 +02:00
dd74ec8e6f
stlinkv2: Detect fail mem_read on jtag too.
2020-08-05 16:20:52 +02:00
805cfbdcb5
Build hosted for widows with hidapi static linked.
2020-08-03 18:59:50 +02:00
fca8593d92
serial_win: Find BMP comport by serial number.
2020-08-03 18:59:50 +02:00
3eb51ce94f
serial_win.c: Copy the enough of the device name.
2020-08-01 14:00:17 +02:00
11217f8a45
serial_win: GDB needs to handle DTR.
2020-08-01 14:00:17 +02:00
71e9d78210
adiv5.c: Add another ARCH_ID found STM32F205.
2020-08-01 14:00:17 +02:00
1b12e407fd
adiv5: Add missing arch identifiers for Cortex-M7 ETM.
2020-07-31 11:53:15 +02:00
71e5b4d3cb
hosted/stlinkv2.c: Fix bug introduced with #703
2020-07-29 13:42:07 +02:00
72387164eb
hosted/stlinkv2.c: Handle AP_WAIT error when switching to SWD
2020-07-29 12:22:18 +02:00
a392480631
hosted/stlinkv2.c: Use V2 API to read coreid.
2020-07-29 12:22:18 +02:00
696daa8352
adiv5: fix debug print of dev_type
...
Since dev_type is an 8 bit unsigned integer, use the PRIx8 macro instead
of PRIx32.
2020-07-29 11:32:24 +02:00
64cf30e4cd
Rework/update/add Readme.md in the platforms directories.
2020-07-29 10:32:49 +02:00
726d4b4496
adiv5.c: Add missing DEVTYPE and ARCHID to some existing PIDRs(#698,#699)
...
Probably more additions are needed.
2020-07-14 16:26:32 +02:00
52bfe538e3
cdcacm.c: Set bMaxPacketSize0 to 32 ( #693 , #697 )
...
Smaller bMaxPacketSize0 resulted in delayed enumeration when BMP firmware
is started by the STLink bootloader.
2020-07-14 15:57:03 +02:00
09ceaea70f
adiv5_swdp: Fix another memory leak.
2020-07-14 15:02:13 +02:00
2ae62433d2
Merge pull request #690 from themadinventor/arm_v8m
...
Add ROM table support for Cortex-M33 and Cortex-M23
2020-07-13 10:56:03 +02:00
a673efc26b
Remove extra definitions of jtag structures in the STLink hosted setup to support "gcc (GCC) 10.1.0" on Archlinux
2020-07-12 23:14:19 +02:00
7ebb94d134
cortexm: Add comment on CPUID register
2020-07-12 22:54:39 +02:00
4391851f4d
adiv5: Change component descriptions from MTB to Micro Trace Buffer for consistency
2020-07-12 22:29:04 +02:00
0aadd0abce
Adiv6: Add comment on DEVTYPE and ARCHID fields with references
2020-07-12 22:27:46 +02:00
fcd945a529
cortexm: Read CPUID to identify core version
2020-07-12 12:08:22 +02:00
39a20d78ff
v8m: only check relevant bits in DHCSR when polling in cortexm_forced_halt
2020-07-12 12:07:12 +02:00
a35e9c8e5c
Adiv6: Read DEVTYPE and ARCHID to identify Cortex-M23 and Cortex-M33 debug components
2020-07-12 12:00:31 +02:00
661f78033a
stm32f1: Add F1 XL with dual bank handling,
2020-07-08 14:31:58 +02:00
fc6ca5bc06
Remote: Add procedure to test if high-level remote functions are available
...
Removes need for updated version string.
2020-07-08 14:15:35 +02:00
bfda64c656
stlink: Remove unused double defined variable "running_status"( #683 )
2020-07-02 19:44:31 +02:00
85d35b75ce
libftdi/jtagtap_tdi_tdo_seq: Remove dubious Null termination.
2020-07-02 14:56:10 +02:00
a4cdd6b310
hosted: Report missing USB access rights only if no debugger found.
2020-06-07 16:29:19 +02:00
eabd69dcdb
Adiv5: Protect DBG/SYSTEM Power-Up request with timeout too.
...
CMSIS-DAP without connected target looped infinite in that situation.
2020-06-07 13:14:32 +02:00
e35025d214
CMSIS_DAP: Warn when hidapi-libusb is not found.
2020-06-06 15:28:53 +02:00
5097a23196
jlink: Fix wrong sized array.
2020-06-06 15:28:53 +02:00
4ede113ca7
hydrabus: Disable DFU file generation untit somebody fixes dfu-convert.py
...
This allows "make all_platforms" to succeed on python3 only systems.
2020-06-05 16:23:28 +02:00
aabd07738e
cl_utils: Use start of flash in memory map as default flash start.
2020-06-05 14:59:30 +02:00
425002a38f
hosted: Add -l argument to list only available debuggers and exit.
2020-06-05 14:59:30 +02:00
dc3fd2eb06
Classify debug messages
...
Firmware BMP with ENABLE_DEBUG=1 will print WARN and INFO as before.
PC-Hosted BMPwill alway print to stderr. Warn is printed unconditional,
INFO, GDB, TARGET, DONGLE and WIRE will print if their appropriate bit in
cl_debuglevel is set via the -v verbose command line argument.
INFO will go to stdout with -t or -l.
2020-06-05 14:59:30 +02:00
9ade8b24f7
hosted: Add Readme.md
2020-06-05 14:59:30 +02:00
4698a26bab
common/swdptap: Slight speed increase and better setup time for write.
2020-06-05 14:59:30 +02:00
64f3dff8a8
PC-Hosted: Better debug output.
2020-06-05 14:59:30 +02:00
b06c0ba8d5
bmp_remote: Use high level functions.
...
Based on #570 (OpenOCD HLA interface driver for Blackmagic), but now
usefull for bmp-remote.
2020-06-05 14:59:30 +02:00
921c23eb74
serial_unix: Return instead of exit in case of error.
2020-06-05 14:59:30 +02:00
ef558eebb8
CMSIS-DAP support.
...
Thanks to edbg, pyocd and openocd for code and ideas.
2020-06-05 14:59:30 +02:00
4ba6afed28
Add jlink pc-hosted platform.
2020-06-05 14:59:30 +02:00
efce2ae892
Do not compile jtagtap and swdptap when not needed.
2020-06-05 14:59:30 +02:00
da45281696
GetTargetVoltage: Print info about voltage only when info is relevant.
2020-06-05 14:59:30 +02:00
ef816e3183
hosted: add libftdi implementation, remove old implementation.
2020-06-05 14:59:30 +02:00
ab7991c3a6
hosted: Add bmp_remote, remove old pc-hosted platform.
2020-06-05 14:59:30 +02:00
13c3c934d2
Hosted: Add Stlink, remove old pc-stlinkv2 platform
2020-06-05 14:59:30 +02:00
09602a9e74
serial_unix: Simplify timeout setting.
2020-06-05 14:59:30 +02:00
8fea3f6baa
pc/serial_xx: Change arguments for the open call.
2020-06-05 14:59:30 +02:00
a09104c281
Build firmware executables as *.elf file
2020-06-05 14:59:30 +02:00
dd022fcb44
platforms/pc: Add common usb utilities.
2020-06-05 14:59:30 +02:00
52739def01
Copy relevant stlink files.
2020-06-05 14:59:30 +02:00
386a4bfce7
hosted: Device detection and selection.
2020-06-05 14:59:30 +02:00
3290def5f8
Add empty compilable project.
2020-06-05 14:59:30 +02:00
c3d509e6c0
Clean up PLATFORM_HAS_DEBUG
...
Use only for firmware platforms.
2020-06-05 14:59:30 +02:00
9a46c6fd25
Allow BOARD_IDENT as function
2020-06-05 14:59:30 +02:00
563df2d354
Detour ADIv5 high-level functions.
2020-06-05 14:59:30 +02:00
9969c984f3
detour jtag primitives.
2020-06-05 14:59:30 +02:00
e34a27f72c
Detour swd primitives.
2020-06-05 14:59:30 +02:00
1e10b96b03
Allow multiple scan routines.
2020-06-05 14:59:30 +02:00
b0cf7d24bd
adiv5.c: Fix another leak.
2020-06-05 14:59:30 +02:00
783ec377d9
adiv5: Export extract.
2020-06-05 14:59:30 +02:00
eee16cf08a
platforms/tm4c/jtagtap.c: Remove unreferenced and incomplete file.
2020-06-05 14:59:30 +02:00
f3790b90e5
command.c: Simplify usage of serial_no serial number string.
2020-06-05 14:59:30 +02:00
966ac4036d
target.c: Check for valid flash structure.
2020-06-05 14:59:30 +02:00
60f39f55b4
MSP432: Warn when hardware version not supported.
2020-06-05 14:59:30 +02:00
7956fbc361
cl-utils: Print memory map when test is specified.
2020-06-05 14:59:30 +02:00
b5182e09d0
cl_utils: When reading from flash to file, truncate the file.
2020-06-05 14:59:30 +02:00
8db979798c
cl_utils.c: Report read/write speed.
2020-06-05 14:59:30 +02:00
c5d0902d4c
cl_utils: Fix memory leak.
2020-06-05 14:59:30 +02:00
815e09bb1b
cl-utils: Add more arguments
2020-06-05 14:59:30 +02:00
05adcd9bf5
remote.c: Compile only relevant functions.
...
Do no compile firmware functions when compiling pc-hosted.
2020-06-05 14:59:30 +02:00
16967b4328
adiv5: Remove only local dp_idcode used from ADIv5_DP_t struct.
2020-06-05 14:59:30 +02:00
b8b34e7b1d
adiv5: remove cfg for AP structure, cfg is only used local.
2020-06-05 14:59:30 +02:00
34a13723d8
Decrease the control USB pipe size on f103 blackmagic probes to 8 bytes
...
Rationale:
In USB device mode, the f103 chip provides 512 bytes
of memory for USB traffic. In the 'master' branch
of the blackmagic probe, the control endpoint pipe size
is set to 64 bytes, effectively consuming a quarter
(1 'in' endpoint, 1 'out' endpoint == 2 endpoints,
2 /* endpoints */ x 64 /* bytes per endpoint */ == 128 bytes
out of 512 /* bytes of precious usb packet memory */).
The USB standard, for full speed devices, does allow
a control endpoint size of 8 bytes.
I am not too aware of all the details of the USB standard,
but the USB standard seems to allow fragmented transactions
on the control USB pipe (endpoint 0), which libopencm3
apparently supports:
libopencm3/lib/usb/usb_control.c:usb_control_send_chunk()
I am using this change (from 64, to 8 bytes)
on a windows 10 machine, on an stlink hardware
('PROBE_HOST=stlink'). It works on my machine.
This change can potentially provide other USB endpoints
in the blackmagic firmware with more memory
2020-06-05 13:58:08 +02:00
69e330849d
fix flash map for STM32G431, as it is a special case different from the STM32G47x and STM32G48x chips
2020-06-05 13:41:18 +02:00
f9f928e9d6
Add support for LPC8N04
2020-06-05 12:33:51 +02:00
34c0d5a1c9
When timeout is 0, `timeout_is_expired()` should return immediately.
2020-06-05 12:33:24 +02:00
6eb1b09c1c
pc-hosted semihosting
2020-05-27 12:51:29 +02:00
541861e978
traceswo decoding
2020-05-16 15:04:35 +02:00
54ee00b0f6
set semihosting sys_clock time origin
2020-05-13 17:50:39 +02:00
499309f648
stm32f1: Tell user about STM32F10(3) clone.
2020-05-13 13:07:55 +02:00
1a83bc6892
Rename variant_string in efm32 samd samx5x ( #659 )
...
* Rename variant_string
Files efm32 samd samx5x uses same function name that collides during
linking (checked with gcc10)
Signed-off-by: Alexey 'Alexxy' Shvetsov <alexxyum@gmail.com>
* Also make xxx_variant_string static
Signed-off-by: Alexey 'Alexxy' Shvetsov <alexxyum@gmail.com>
2020-05-12 17:47:04 +02:00
805464db23
Fix redefinition of io function
...
Now it should work fine with any gcc version. Old one produces error
like in #657
Signed-off-by: Alexey 'Alexxy' Shvetsov <alexxyum@gmail.com>
2020-05-10 10:58:03 +02:00
9b939f4a3a
stm32f4: Fix option byte handling ( #654 )
...
Option bytes are not accessible with level 1 protection, so
Use FLASH_OPTCR(x)
Fix crash with "mon opt write xxxx"
Handle option manipulation better when HW Watchdog fuse is set
Allow abbreviated "mon option x<yyy>" commands
2020-05-05 12:52:32 +02:00
923949d5dd
Fixed variable/function name clash building on Windows
2020-05-03 15:45:31 +02:00
9f8c7be360
semihosting
2020-05-02 12:55:29 +02:00
d63e870e82
cdcacm: Fix UART interface OUT endpoint MPS in descriptor.
...
3e3e450Fixes #538
2020-05-01 12:39:40 +02:00
08bb4d5775
pc-hosted: Make JTAG work.
2020-04-27 20:30:51 +02:00
8851504a41
new semihosting commands
2020-04-23 09:43:46 +02:00
ada17ada23
stm32f4/7: Always use largest flashsize for device family ( #633 , #635 , #644 )
...
Do not care for the FLASHSIZE register. Leave it up to the user to abuse
flash area the ST did not announce.
2020-04-21 17:04:07 +02:00
164eb43f00
NRF5: Do not reset target options.
2020-04-14 19:01:43 +02:00
bea8436561
NRF5: Always set CORTEXM_TOPT_INHIBIT_SRST( #230 )
...
The problem also happens with NRF52840. Set CORTEXM_TOPT_INHIBIT_SRST
for all NRF5 device.
People should be more persistent!
2020-04-14 18:11:23 +02:00
d1468530bd
add basic support for LPC11U68 (and maybe LPC11U68)
2020-04-06 23:36:49 +02:00
846dadcc39
lmi: add support for TM4C1294NCPDT
2020-04-03 19:42:24 +02:00
58a8571d5b
stlink: Print Target voltage
...
This adds about 600 bytes.
2020-04-03 16:19:20 +02:00
8a9980cd06
pc/serial_unix: bump device path buffer size to 4096 bytes
...
Since dp->d_name can be up to 255 bytes long and the 'name' buffer variable is
is a superset of it, bump the size of the latter to 4096 bytes (correspoding
to PATH_MAX on Linux systems).
2020-04-03 11:05:11 +02:00
b4ab9f328e
pc-hosted: Put serial handling in own files for unix and implement for windows.
...
- If host provided /dev/serial/by-id, device must not be given and
multiple devices may be selected with -s <(partial) serial number>
- On windows, device must by specifies with -d
2020-03-31 17:02:56 +02:00
18ae2bb50d
cl_utils.c: Include <windows.h> for windows builds that work on files.
2020-03-31 17:02:56 +02:00
1a0cee4e9d
pc-hosted: Clean up Makefile.inc.
2020-03-31 17:02:56 +02:00
bd73adf9c7
bmp/pc platforms: Deduplicate code.
2020-03-31 17:02:56 +02:00
9ca401497c
stm32/timing_stm32.c: Remove fixed constants and direct SCB access
2020-03-31 16:54:04 +02:00
c4d7232223
Export function to read out PIDR and use for samd and samx5x.
2020-03-26 19:05:57 +01:00
a0e42e229b
Make more things static.
...
No functional change intendend.
2020-03-26 18:44:19 +01:00
eca3a8dd8f
pc-stlinkv2: Make stlink_usb_get_rw_status static and allow to suppress errors
...
This helps to not overflow the console.
2020-03-26 17:56:12 +01:00
91d7656d86
stlink/bootloader: Really allow to detach.
...
- To reenumerate, rcc_periph_reset_pulse(RST_USB) seems enough.
- Document bootloader entry and exit behaviour of ST-LINK V2
- Document bootloader entry on ST-LINK V2-1
2020-03-26 17:15:32 +01:00
890b494290
pc-stlinkv2: Update README.md
2020-03-26 12:21:22 +01:00
effd43ce38
Harden cortexm_reset() and remove double reset( #601 )
...
Thanks to Dave Marples <dave@marples.net> for input.
- Issue only one reset. Start with SRST. Only if not seen, use SYSRESETREQ
- Wait for release of DHCSR_S_RESET_ST before issuing more commands
- Add timeout to catch reset line stuck low
- Remove AP errors
2020-03-25 11:22:14 +01:00
2e185ba578
BMP/PC: Allow to compile with mingw64 ( #615 )
...
__USE_MINGW_ANSI_STDIO 1 must be set befor any windows specific included.
2020-03-24 17:59:13 +01:00
2b76ec0ea3
dfucore: Reject erase outside the allowed range
...
An illegal erase request may get emitted as the DFU program may erase
first. Checking before flashing is not enough.
2020-03-22 16:38:54 +01:00
a7efe7cc14
cl-utils: Display targets found.
...
+ other small changes in DEBUG output.
2020-03-10 17:34:30 +01:00
65cb886bb6
Export connect_under_reset.
2020-03-10 11:44:53 +01:00
2065c70888
adiv5: Split PRIx64 into two PRIx32 as nanolib does not support PRIx64.
2020-03-10 10:56:42 +01:00
75186f7d50
ADIv5: More CoreSight device decoding:
...
- MTB-M0+ (Simple Execution Trace)
- M33: Devices need finer decoding (DEVTYPE at offset 0xfcc)
2020-03-08 22:37:59 +01:00
c7e7bd61b6
stlink: Do not wait for the reaction on the reset line.
...
pc-hosted will abort, if the reset line is held externally to some value.
As assert is either driven or driven open drain, we can assume assert
immediate. For deassert, logic levels differences between the debugger and
the debuggee may apply and other ways to check the result are needed, like
CORTEXM_DHCSR_S_RESET_ST.
2020-03-08 16:27:03 +01:00
e48d9ebc92
cl_utils: Allow to connect under reset.
2020-03-06 23:15:56 +01:00
919d9320fd
Remove unrelated files.
2020-03-06 19:33:20 +01:00
05dc2e239e
pc-hosted: Disable TPWR when blackmagic command line interaction terminates.
2020-03-06 17:16:33 +01:00
c94a03af48
STM32F1 High density devices DFU support( #587 )
2020-03-05 19:58:55 +01:00
288620551f
adiv5: Print out SYSROM PIDR.
...
We need to know more about what devices indicate proper PIDR and what
devices fail to do so.
2020-03-04 19:02:07 +01:00
8c959defca
efm32: Make local functions static.
2020-03-04 18:44:40 +01:00
13b9fe1efc
cl_utils: There is no need for a (dummy) target controller.
...
Fix for #593 .
2020-03-04 16:57:05 +01:00
03d84d0d5c
command line tools: Allow to set power.
2020-02-20 12:12:26 +01:00
7a595ead25
fixup F103x8 flash size before build dfu iface string
...
we handle F103x8 as F103xB with 128k flash
2020-01-22 16:01:39 +01:00
45fb12f9b6
cl-utils: Care for -j (JTAG) argument in test mode.
2020-01-21 11:49:45 +01:00
1a1cabc90b
Remove explicit include of rcc.h and allow common file to steer the right file
...
Clean up DFU files with MCU explicit includes
2020-01-14 00:09:20 +01:00
2137e775a4
stlink: update docs on how ti reflash BMP back to STLink original firmware ( #572 )
...
* stlink: update docs on how ti reflash BMP back to STLink original firmware
* stlink: specify v2 in docs on reflashing back
2020-01-11 16:52:22 +01:00
ee553c9a50
Corrected error checking for socket functions ( #577 )
2020-01-11 16:47:02 +01:00
c3a3f7737f
Hosted: Allow command line interaction.
2019-12-13 14:59:42 +01:00
ee316431f5
stlink for st-bootloader: Reset with platform_request_boot()
...
Both V2 and V21 switch to (ST) bootloader with powered reset.
2019-12-13 14:59:42 +01:00
470c8e8cf1
target_flash_erase: Do not crash when requesting erase of unavailable flash.
...
Allow to erase from command line.
2019-12-13 14:59:42 +01:00
b9eb467ecf
Command line: Restrict verify to length of binary file.
2019-12-13 14:59:42 +01:00
269d38ce65
cl_utils: Allow to issue reset.
...
Issue reset only when flashing or when reset was requested.
2019-12-13 14:59:42 +01:00
da5a0cd3f5
Infrastructure for command line interface to target
...
- Program, read and verify flash
- Test mode: Probe and attach to device and exit
2019-12-08 16:43:19 +01:00
ab396f9745
Allow %z specifier in windows builds. Supercedes #562 .
2019-12-08 16:43:19 +01:00
1bef51e145
adiv5: Abort scanning APs after 8 void APs.
2019-12-08 16:43:19 +01:00
6d01c3c55b
stlinkv2: Propagate AP errors
...
Needed when reading some memory region of unknown size.
2019-12-08 16:43:19 +01:00
bdd76de517
Erase: Fix endless erase when erase-area did not end on (page|block) boarder.
2019-12-08 16:43:19 +01:00
25d24e5c34
efm32: Allow to compile with -Og.
2019-12-08 16:43:19 +01:00
5943552a6b
[efm32] Probe for the EFM32 Authentication Access Port (AAP)
...
Supported functionality through this AP:
* Issuing a DEVICEERASE command
2019-12-08 16:21:02 +01:00
260fc88d8f
[efm32] Add command to set and print bootloader enable status
...
This is a bit in the Lock Bit (LB) flash page, so it can only be
cleared by this routine
2019-12-08 16:17:02 +01:00
7f0d5febc3
[efm32] Print MSC Interrupt Flags to DEBUG after each flash write
2019-12-08 16:16:55 +01:00
e85df763b7
[efm32] add new devices PG12B, JG12B, GG11B, TG11B, GG12B
...
Rework MSC layout check
2019-12-08 15:55:12 +01:00
f89542c79f
Merge pull request #203 from dlaw/master
...
Add LPC11xx command to read out unique ID from target. Restore Ram and registers after call.
2019-12-08 15:45:49 +01:00
5ec12e4103
Support arbitrary bit counts jtagtap_tdi_tdo_seq pc-hosted
2019-12-08 14:34:35 +01:00
d42477ebc5
Fix infinite loop in jtagtap_tdi_tdo_seq
2019-12-08 14:34:35 +01:00
f10ccfd83e
f4discovery: Fix error with GCC9 being more picky with sizes.
2019-12-05 19:36:05 +01:00
8a07f44435
Add support for the kinetis KL16Zxx devices. Tested on KL16Z128VFM4 custom hardware
2019-11-21 20:37:13 +01:00
1924aa4999
Make baudrate parameter of traceswo command mandatory for stlink/swlink, and superfluous on other platforms; change help message accordingly.
2019-11-19 20:20:13 +01:00
e7e34600a4
lpc11: Only print Idcode if not zero and not yet handled.
...
Otherwise for all Cortex-M not yet handled this LPC messages appears.
2019-11-17 13:24:39 +01:00
9198c951bb
Reduce flash space required for SAM D51/E5x driver
...
* Reuse functions that are common with the SAM D1x/D2x driver
* Only include the mbist and write8/16/32 user commands if
SAMX5X_EXTRA_CMDS is defined
2019-11-17 12:45:49 +01:00
d3c330ea1a
Fix issues with Travis CI build
...
It appears the Travis version of gcc-arm-none-eabi doesn't allow the %x
printf format specifier for size_t arguments, in contrast with the
version I'm running on Ubuntu 18.04 (15:6.3.1+svn253039-1build1).
2019-11-17 12:45:49 +01:00
26216beaab
Microchip SAM D51 / E5x support
...
Adds a target driver for Microchip SAM D51 / E5x family.
Tested on SAMD51G19A and SAMD51J19A. According to the datasheet, the
D51 / E5x family share the same core feature set, differing only in the
addition of CAN (E51) or ethernet controllers (E53/54). All members of
the family should be equivalent from a debug and programming perspective.
2019-11-17 12:45:49 +01:00
5a05cedd7d
pc-hosted/jtagtap.c: Handle DO as bytes (PR #552 )
...
Fixes #540/#542
2019-11-10 17:36:58 +01:00
28f0ced97e
Support NXP LPC1343
2019-11-09 18:47:07 +01:00
67f9d26644
samd: Add support for L21 & L22 (PR #345 )
2019-11-09 13:59:37 +01:00
04d9749f25
Makefile: Publish DFU binaries with the daily build. ( #549 )
...
Fixes #548 .
2019-10-28 16:37:41 +01:00
76f9a6ad42
stm32: Portability changes.
2019-10-20 22:20:06 +02:00
b9249fe104
adiv5: Activate DP reset sequence, guarded with timeouts.
...
While not working on most STM32, it succeeds on STM32G474.
Thanks to Dave Marples <dave@marples.net>
2019-10-20 22:15:28 +02:00
c6f43cf23f
Stlinkv2: Always call stlink_leave_state() first.
...
V2 devices after power on are in DFU mode. It is needed to leave DFU before
doing anything else.
2019-10-19 20:57:26 +02:00
58febdff79
Fixed tokenization of gdb monitor commands.
2019-10-19 13:25:26 +02:00
2eef202ee1
Use pkg-config to get CFLAGS & LDFLAGS for libftdi1
...
Pull request #535
2019-10-14 19:22:53 +02:00
0aedff6623
Set the accepted to socket to be blocking as that is what the code expects.
...
This is necessary on OSX (and probably BSDs) where they default to non blocking which causes recv() to return -1 with errno set to EAGAIN.
2019-10-14 12:45:10 +02:00
4a8cba0e9c
Add support for LPC1114/333 (LPC1100XL series)
...
This is not given in the user manual but the register immediately
following DEVICE_ID does apparently contain the correct part ID.
2019-10-13 13:01:19 +02:00
5c805c7d35
Fix buffer overflow in adiv5_component_probe()
2019-10-12 11:44:08 +02:00
90df8172ca
Addition of pc-hosted variant and extensions to other targets to support it.
2019-10-08 19:16:12 +02:00
8a1d8bfba3
Stlink: Variant for Stlink V2 that works with the original ST bootloader.
...
Use https://github.com/jeanthom/stlink-tool.git for encrypted upload and
switch to BMP.
2019-10-08 18:18:19 +02:00
0ae7cea1ae
Add LPC84 from UM11029, Rev. 1.4, tested on LPC845 Breakout board.
2019-10-08 18:17:43 +02:00
12a2659671
pc-stlinkv2: StlinkV3 seems only to work with STM devices,
2019-09-29 16:48:42 +02:00
0599d2161c
pc-stlinkv2: Recognize another error and try to handle failing memread.
2019-09-29 16:48:31 +02:00
1cf0b8ac13
Make all arguments for all commands (struct *t, int argc, const char **argv).
...
-Wall on gcc8 otherwise warns without -Wno-cast-function-type but older
GCCs/CLang choke on that argument:
error: unknown warning option '-Wno-cast-function-type'; did you mean
'-Wno-bad-function-cast'? [-Werror,-Wunknown-warning-option]
This adds 24 byte to the binary, as some functions are now called with
additional dummy arguments:
"Pushing and popping garbage to keep the system happy"
2019-09-29 12:44:55 +02:00
f010a567bd
adiv5: Reject APs duplicating last AP.
...
Seen with TM4C129 on black MSP432R401 Launchpad. Scanning of APs is aborted,
so valid APs after duplicated APs are ignored.
2019-09-29 12:44:37 +02:00
afbde05cd3
Linker: Recent libopencm3 linker already sets the stack.
...
Thanks to Sid Price for noticing #520 .
2019-09-23 22:48:21 +02:00
fae2966b72
Target: Default to nop-function() for all exported target functions.
...
Fixes #522 .
2019-09-23 17:42:29 +02:00
3a6947a68f
stlink: Check for baite variant. ( #519 )
...
If PC13/14 float and PB11 is pulled high, recognize as baite.
Handle as rev.1 board. Deciphered from:
http://www.avrki.ru/picture/articles/samodelniy_st_link_v2/shemf_st_link_v2.jpg
2019-09-05 20:37:16 +02:00
609e6b135d
nrf51: Add nop_function as halt_poll. ( #517 )
...
Otherwise "tar ext ...; mon s; att 2; quit", start new gdb "tar ext ..."
crashes, at least on pc-hosted platforms.
2019-09-04 13:50:13 +02:00
6663da7ff5
cortexm.c: Fix DWT Mask ( #516 )
...
See #513
2019-09-04 13:28:55 +02:00
00937348b3
Fixes to compile "make ENABLE_DEBUG=1 all_platforms" ( #515 )
2019-09-04 13:09:43 +02:00
7dcb3295c6
Native: Link against nanolib. ( #514 )
...
This frees about 13 kB or 30 kB with ENABLE_DEBUG=1
2019-09-04 12:51:30 +02:00
e6504e149b
cortexm: Implement single register read/write
2019-09-01 20:38:38 +02:00
7bcf7f4924
cortexa: Implement single register read/write
2019-09-01 20:38:38 +02:00
20cad17ce3
target: Implement generic multi-register read/write
2019-09-01 20:38:38 +02:00
19a8078f99
gdb: Implement 'p' and 'P' register access
2019-09-01 20:38:38 +02:00
9f4cf4124e
target: Add new methods for read/write individual regs.
2019-09-01 20:38:38 +02:00
1d868bfffb
pc-stlinkv2: Detect stlink detach.
...
As libusb has no real async callback, we need to call libusb_handle_events()
in different places. While waiting for the gdb connection, we set the
socket to non-blocking and check additional for usb events in that loop. That
way, detach is also detected while waiting for connection. With debugger
attached, SET_IDLE_STATE ist missused for checking for usb events.
2019-09-01 12:19:14 +02:00
6f1cae9203
pc-stlinkv2: Wait for device attach.
2019-09-01 12:19:07 +02:00
86d0be9708
pc-hosted: Display morse message on controlling terminal.
2019-09-01 12:11:51 +02:00
80a9fd51ca
Clarify STM32F103x8 Flashsize handling.
...
Should finally fix #471 .
2019-09-01 12:11:51 +02:00
d39dc34382
pc-stlinkv2: Fix reg_read|write
...
- Fix wrong placed brace in cortexm_regs_write()
- Start writing with r0
- With register read, save only registers listed
2019-09-01 12:11:37 +02:00
d1ee827b4d
pc-stlinkv2: STLINK_SWD_DP_ERROR seem unrecoverable. Throw exception.
2019-08-31 11:20:17 +02:00
0d61106f90
pc-stlinkv2: Remove redundant read of CoreID.
2019-08-31 11:20:17 +02:00
aef055bb6f
adiv5: If setup AP0 fails, fail immediate.
2019-08-31 11:20:17 +02:00
a01109543e
pc-stlinkv2: Return failure if STLINK_DEBUG_APIV2_INIT_AP fails.
2019-08-31 11:20:17 +02:00
d994565f2e
pc-stlinkv2: Fix crash with serial given not matching connected devices.
2019-08-31 11:19:13 +02:00
2b7d4c5ade
swlink: Remove redundant conditional usbart_init().
...
Noticed in #506 .
2019-08-28 11:39:03 +02:00
35cb4e51e4
Windows Build Fixes GNU make 4.2.1 ( #502 )
...
After update of GNU make the tests for Windows OS are no longer needed. Note that GNU make 4.2.1 is used to build BMP under Windows OS.
Make native working
Again, the newer version of GCC make does not need the OS tests.
2019-08-28 10:45:41 +02:00
5d59338de5
pc-stlinkv2: Try first to reset device if we read a strange version number.
2019-08-27 15:13:26 +02:00
44f471db53
pc-stlinkv2: READMEM_8BIT needs to read 2 bytes for 1 byte requested.
...
Fix as seen in openocd.
SYSROM_PIDR2 has only 3 bits for the JEP106 identity code field, bits [6:4].
2019-08-27 15:13:26 +02:00
82be49f052
Stlink: Add a README.md, mostly deprecating reflashing Stlinkv2/1.
2019-08-27 15:13:26 +02:00
5fbb3a44fd
PC-STLINKV2/Libftdi: Better version string.
2019-08-27 15:13:26 +02:00
fa27649f87
Remove debug_bmp command on PC hosted platforms.
2019-08-27 15:13:26 +02:00
6bf4fd3598
pc-stlinkv2: CPU register read and write must be done with the AP set.
...
FIXME: Writing CPU registers on M4 of STM32H745 seems not to work.
2019-08-27 15:13:15 +02:00
443ced62d4
Target latest libopencm3
...
Required fixes:
* use usbd_request_return_codes -- commit 54b117c5a5767df8dc114612dfd8e8cb88b72c6b
* drop deprecated timer_reset() -- commit 034dbf20ff8c54dcbee5238390b37a0d35180f44
* drop 48 & 120 MHz configs -- commit a9dde2832eb8039b9e0d21a50b9b991ddbfc4e2d
* ld scripts: drop duplication of standard sections -- commit 9a05dcb6c0aef712052d337457838f6041ffd57a
2019-08-14 00:57:15 -07:00
4289788e0b
src: Replace sprintf with snprintf
...
snprintf is needed anyway, that's one less function to have :p
And it's bad practice anyway.
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
2019-08-05 15:43:33 +02:00
1d4152a36f
target: Make sure variant_string is consistent in size
...
It's a global symbol and LTO will complain if the one in this file and
the one in EFM32 target are inconsistent.
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
2019-08-05 15:42:29 +02:00
544bcd9845
build: Allow support for .S assembly file in SRC
...
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
2019-08-05 15:41:46 +02:00
804ec24df9
build: Apply OPT_FLAGS after platform Makefile.inc include
...
This allows the platform to specify another optimization level than
the default (like -Os if space is limited)
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
2019-08-05 15:29:00 +02:00
ef372d0161
build: Use a separate NO_LIBOPENCM3 flag to disable libopencm3
...
This prepares to allow other architectures than pc
that don't use libopencm3.
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
2019-08-05 15:24:16 +02:00
06078a8a98
stlinkv2.c: Ignore zero length memory transactions.
2019-07-28 16:28:18 +02:00
d92635b6a3
stlinkv2: Use stlink_usb_get_rw_status() where possible.
2019-07-28 16:27:52 +02:00
1b3acf3b8a
pc-stlinkv2: Print serial number of V20 devices readable.
2019-07-20 13:34:21 +02:00
e29f2b4fb9
jtag/swd: Rename defines/make variables to allow removal of weak attribute
...
jtagtap.c is libopencm3 generic. Move to common.
2019-07-18 20:54:10 +02:00
067956266c
Adiv5: Remove weak attribute to ease windows compile.
2019-07-18 18:16:19 +02:00
9e898cc4b8
adiv5: Add more coresight part numbers found on STM32MP157c-DK2 ( #492 ).
...
Only print corename if not NULL.
2019-07-18 17:39:48 +02:00
b9249ca8a6
stlinkv2: Recognize V21_MSD, e.g. on STM32MP157C-DK2.
2019-07-17 17:38:21 +02:00
dd3cb193f3
Indicate the Core in the Target list.
2019-07-17 17:38:21 +02:00
c44cb904b0
adiv5.c: Format debug output more tense.
2019-07-17 17:38:21 +02:00
205fce20e5
stlinkv2: mem_[read|write] needs to honor AP.
2019-07-17 17:38:21 +02:00
634c07c432
adiv5: Add TSGEN.
2019-07-17 17:38:21 +02:00
82424b100b
stlinkv2: Require STLINK V3 Rev > 2 as revision 1 can not read TARGETID.
2019-07-17 17:38:21 +02:00
9b764534e6
stlinkv2: Recognize Stlink V3E
2019-07-17 17:38:21 +02:00
3388e48d92
stlinkv2: Do not loop endless when Read DP fails.
2019-07-17 17:38:21 +02:00
9ed26645d3
Add pc_stlinkv2 platform, running on host, talking to original StlinkV2/3.
...
Stlink firmware needs to be recent.
2019-07-17 17:38:01 +02:00
fd3af639b0
Clean up some includes.
...
Includes #465 , noticed by Sid Price.
2019-07-17 17:26:00 +02:00
32d2b2c4bf
jtag: Move device list to it's own file to allow reuse.
2019-07-17 17:26:00 +02:00
bd530c8951
adiv5.c: Make functions weak where high level platforms may implement different.
2019-07-17 17:26:00 +02:00
5aebef4f64
Makefile: Indicate high level SWD/JTAG implemenatation.
2019-07-17 17:26:00 +02:00
3b75cb9a5a
gdb-server: Allow multiple instance.
2019-07-17 17:26:00 +02:00
9075411c93
Move gdb_if.c for stand-alone servers to common.
2019-07-17 17:26:00 +02:00
df7458e35a
Build-Infrastructure: Allow a different target name.
2019-07-17 17:26:00 +02:00
b4c680bb15
Add STM32G4
...
Based on #488 Stephen Roe, done as #491 .
Fixes ID of STM32G03.
2019-07-17 17:24:23 +02:00
5a7ffe7a40
Fixed SAM3X8C large file flashing.
...
The datasheet specifies the EEFC_BASE(0) is at `0x400E0A00` and EEFC_BASE(1) is at `0x400E0C00` which means they're spaced 0x200 bytes apart rather than 0x400.
2019-07-17 14:37:07 +02:00
02b2fdb2ae
fix overwriting of still-needed value (refs #487 )
...
this fixes a bug that was introduced in blackmagic PR #475 which lead to
firmware crashes when connecting to a BMP more than once without a
power-cycle.
2019-06-24 16:45:18 +02:00
589d297d20
stm32l0: Fix crash when only "monitor option" was requested.
...
PR #485
2019-06-12 12:54:29 +02:00
880613d641
lpc_common: restore RAM and registers after IAP call
...
Restore the RAM and registers which are clobbered by an LPC IAP call.
This does not restore any additional RAM which might be clobbered
by a *particular* IAP call. (For example, flash programming always
clobbers the last page of RAM.)
2019-05-30 14:01:27 -04:00
d3979a57b6
Add LPC command to read out unique ID from target.
...
This commit modifies lpc_iap_call() to work with IAP commands that
return additional data. If the "result" argument is non-null, 16
bytes of data (the maximum returned by any IAP command) are copied
to the specified address.
2019-05-30 14:01:12 -04:00
21434d6fbb
Remove redundant include file
2019-05-26 23:27:32 +02:00
600bc9f029
Generate DEBUG warnings and return if `malloc`/`calloc` fail.
...
This is will make debugging earier if this does happen, rather than
dereferencing the null pointer (or passing it to memcpy, or worse).
blackmagic PR #475
2019-05-26 18:56:12 +02:00
61e9607594
[adiv5] Improvements in ADIv5
...
* Reference latest version of the ARM specification
* ROM tables - more debug information, including printing SYSMEM bit
* MEM-AP - reject when Debug Base Address entry is not
present/invalid. These would only have errored in
adiv5_component_probe.
* Fix maximum number of entries in Class 0x1 ROM Table to 960. See ARM
IHI 0031E Table D3-1 ROM Table register summary.
* Resolve note in STM32H7 driver with explaination
blackmagic PR #474
2019-05-24 22:00:44 +02:00
703f88a969
gdb_main: Always release CPU when detaching.
...
Fixes Issue #413 and released as PR #477 .
2019-05-23 13:17:54 +02:00
24a7b8b2bf
[stm32h7] add revision command which reads the `DBGMCU_IDC` register
...
blackmagic PR #476
2019-05-21 23:20:13 +02:00
c336c300a3
[stm32h7,bugfix] Fix bug: target_add_flash called in attach
...
When `target_add_flash` or `target_add_ram` are called in an attach
function they may be added multiple times. This very much confuses
GDB. This issue has already been reported and fixed for `stm32l4` (See
Issue #455 ).
`stm32f4` and `stm32l4` are the only other cortexm drivers that
implement this pattern. These are both fine.
2019-05-21 22:38:16 +02:00
984813a29d
Add Stm32G03 from reference manual Rev.2
...
Not yet tested on a real part.
2019-04-24 12:29:58 +02:00
2108bb7137
Native Windows builds
...
All except hydrabus and launchpad-icdi building in PowerShell.
2019-04-07 10:26:45 -06:00
302ff20a6d
Merge pull request #434 from UweBonnes/nrf5
...
Nrf5
2019-03-21 19:43:29 +01:00
3235fa2005
Improve parsing of commands that require enable or disable arguments:
...
* Accept prefixes of the words 'enable' and 'disable'
* Prevent silent failures on parse errors
* Print status after flag changes
* Fix missing includes
2019-03-19 12:56:44 -07:00
691ada17e9
Implement read device info for NRF5x
2019-03-10 21:45:47 +01:00
3f89fed32e
nrf51: Use buffered direct write to flash.
2019-03-10 21:45:47 +01:00
4ecd13a9a3
nrf51: Fix crash with not argument given to "mon read".
2019-03-10 21:45:47 +01:00
db2f403417
sam4l: Remove noisy debug message.
2019-03-10 21:45:47 +01:00
a336ac2084
NRF5: New detection scheme.
2019-03-10 21:45:47 +01:00
6887628eaa
Correction of #445 attach-detach problem
...
Memory map is now completely freed and rebuilt in the separate attach
function.
It was previoulsy split beween probe and attach and never released,
causing problems when reattaching to the same target.
2019-03-03 15:55:40 +01:00
da62cbaa3d
Merge pull request #449 from jelson/width-fix
...
Use 32-bit variable for 32-bit read
2019-02-25 13:21:55 +01:00
86ed86c2a2
Use 32-bit variable for 32-bit read. (Also fixes DEBUG compile
...
error due to mismatch of format and argument.)
2019-02-24 17:49:30 -08:00
56fb0f7766
Handle STM32F730 and STM32H750.
...
Flash sector calculation was wrong with small flash sizes.
2019-02-21 19:19:10 +01:00
3f8c40d3f5
Fixing stm32l4 target to allow probing w/o halting
2019-02-21 18:06:38 +01:00
8de1b45c85
Kinetis KE04: Flash and debug support
...
Support for Kinetis KE04 8KiB, 64KiB and 128KiB variants in nxpke04.c
Target monitor commands for sector and mass erase.
Changes to kinetis.c MDM-AP target to support KE04.
Only KE04Z8 tested in HW.
2019-02-17 22:48:23 +01:00
02c1934c03
Added ability to lock and unlock boot rom for samd controllers
2019-02-13 16:33:07 -08:00
a6b75bb4ef
Makefile: Add -Wnocast-function-type for compilation on gcc8.
...
Older GCC versions do not warn for disabled warnings they do not know yet.
This is needed to compile with gcc8.
2019-01-16 23:17:17 +01:00
0b28232f72
[efm32] Assume Device Identification (DI) version 1 if we don't know the OUI ( #402 )
...
* [efm32] Assume Device Identification (DI) version 1 if we don't know the OUI
Silabs are using some additional OUIs we don't know about. Reported in issue #389
These should use a DI version 1 layout, so assume version 1 layout for OUIs we don't
know. However do print a notice about this on DEBUG() as suggested by @UweBonnes
The IDCODE value is sufficient to make a positive identification of an EFM32 device.
See AN0062 Section 2.2. Therefore accepting any OUI is reasonable behaviour.
Additionally the part familiy is checked, and the target rejected if not in the
`efm32_devices` table. This commit makes that rejection explicit, although it does
not change the logical behaviour here.
Note that the important registers (part number, part family, flash size) are at the
same addresses in both layouts anyhow. Currently only `efm32_cmd_serial` and
`efm32_cmd_efm_info` functions use registers that differ between DI versions.
* [efm32] tidy format warning about portability UB
* [efm32] Simplify OUI checking
* Only read the OUI once
* Accept the device even if the OU is unknown, as silabs have been using
a variety of OUIs
* Perform fewer register reads before checking the device family is valid
2019-01-16 09:58:59 +13:00
7cc02867ae
stm32f4: Fix problems with small flash sizes creating overflow or empty regions.
...
Thanks to "DerMeisteRR" for pointing out.
2019-01-09 12:23:49 +01:00
47fad2bf7f
Add Stm32L41x.
2019-01-09 12:23:49 +01:00
f0c6e2bbd2
Add STM32G07x.
2019-01-09 12:23:49 +01:00
0793dac2cf
libftdi: Allow to compile with mingw and cygwin and use recent libftdi1.
...
Tested with x86_64-w64-mingw32-gcc-8.2.0 and cygwin gcc (GCC) 7.3.0.
Use libftdi1 unconditionally.
Try to convice github travis to use libftdi1.
Remove unportable "uint ". Thanks to jacereda for pointing out in #400 .
2019-01-07 15:31:57 +01:00
3f0c9ccee1
Fix support for LPC1115 and LPC1115XL devices ( #415 )
...
* Add support for LPC11U3X devices.
The DeviceID register has a different address from the LPC11XX devices.
But it is shared with the LPC8XX family.
* Fix support for LPC1115 and LPC1115XL devices
* Fix whitespace
2019-01-07 13:34:00 +13:00
02b9d5f1ac
Add delay to cortexm_reset
2019-01-07 13:32:17 +13:00
d7e2923990
Debug on stm32f1_flash_erase errors
2019-01-07 13:32:17 +13:00
6df793dbf0
Revert "Allow to specificy if SRST is asserted and when it is released."
...
This reverts commit 44fc24e0e7
2019-01-07 13:22:01 +13:00
9ce05ae67b
stm32h7/f7: Store DBGMCU_CR on attach() and restore on detach().
...
On STM32[FH]7, DBG_SLEEP must be set for debugging.
2019-01-07 13:22:01 +13:00
8d6092b73f
cortexm_forced_halt: Only release SRST after "Halt on reset" command.
...
This should make life easier if program remaps JTAG/SWD pins so that
with program running, JTAG/SWD access is impossible.
2019-01-07 13:22:01 +13:00
3ebf049424
cortexm: Only force halt before probe if idcode is unknown and ROM TABLE unreadable.
2019-01-07 13:22:01 +13:00
6633f74d95
stm32h7/f7: Write DBGMCU_CR only on attach.
...
Split probe/attach for STM32H7.
2019-01-07 13:22:01 +13:00
8575d3e7a6
stm32f7/h7: Use the DPv2 provided idcode for MCU identification.
2019-01-07 13:22:01 +13:00
525b90d4e5
cortexm: Only force halt before probe() if probe was forced.
2019-01-07 13:22:01 +13:00
da75acf015
adiv5: Only force cortexm_probe() once.
2019-01-07 13:22:01 +13:00
489f24584b
adiv5: Read TARGETID on DPv2 devices.
2019-01-07 13:22:01 +13:00
cde7726b87
cortexm: detach still needs extra cycles.
2019-01-07 13:22:01 +13:00
14bedcc441
Add support for LPC11U3X devices.
...
The DeviceID register has a different address from the LPC11XX devices.
But it is shared with the LPC8XX family.
2018-10-04 08:53:05 -07:00
771d81a5f0
Fix link for windows_dfu_util
2018-10-03 15:20:09 -07:00
d8b01ff61f
swlink: Enable UART2 for SWO.
...
Stlink on STM8S-Disco needs additional wiring for SWO.
2018-10-03 15:19:33 -07:00
7cafc44bd9
swlink: Allow to enable debug on second VCOM.
2018-10-03 15:19:33 -07:00
0d246fb31a
swlink: Measure voltage on VDD pin of Stlink/Stm8s.
2018-10-03 15:19:33 -07:00
184ef991bf
swlink: Handle LED.
2018-10-03 15:19:33 -07:00
06272e0a59
swlink: Implement dfu_upgrade.
2018-10-03 15:19:33 -07:00
530d1e5c28
swlink: Handle force boot on bluepill.
2018-10-03 15:19:33 -07:00
b744d8b0c9
swlink: Implement NRST.
2018-10-03 15:19:33 -07:00
1263d185a6
swlink: Distinguish between Stlink on STM8-Disco and "blue pill".
2018-10-03 15:19:33 -07:00
91dd879dac
Another nRF52 ID.
2018-09-13 16:18:29 -06:00
3a598a0cf3
Merge pull request #384 from rikvdh/feature/readable-reset-stlink
...
Change the ST-Link SRST reset function
2018-09-07 08:13:48 +12:00
f5cf6d4497
adiv5_swdp: Add extra idle cycles with write transactions.
...
These extra cycles are needed by some CPU, e.g. STM32L0x1 to cross the SWCLK
/HCLK domains. Revert insufficient #373 also tackling that problem.
Thanks to Thorsten von Eicken for pointing out.
2018-09-06 17:29:20 +02:00
95053b3b4e
Change the ST-Link SRST function to use libopencm3 helper functions and fix waiting for the pin-state, change init to use the SRST function for reset de-assertion
2018-09-05 20:28:02 +02:00
f39701c4c8
Move the LPC17xx probe function down since it performs an IAP call which can hang when performed on other devices than a LPC17xx
2018-09-05 17:40:02 +02:00
c5c0783337
Merge pull request #378 from markrages/nordic_unlock
...
Add extra port for mass erasing / unprotecting nRF52 with APPROTECT set.
2018-07-28 14:56:03 +12:00
d0a8ce0819
Add extra port for mass erasing / unprotecting nRF52 with APPROTECT set.
...
Mostly copied from the equivalent in kinetis.c and
https://devzone.nordicsemi.com/f/nordic-q-a/12484/approtect-and-dap/47301
2018-07-27 16:07:19 -06:00
6fd3ede5c7
Merge pull request #377 from markrages/add_id_2
...
Another chip ID for Nordic nRF52832.
2018-07-28 09:53:00 +12:00
cb8596b0b2
Another chip ID for Nordic nRF52832.
2018-07-27 15:09:14 -06:00
5918608156
STM32F7: Debug does not work with WFI without DBG_SLEEP
2018-07-27 10:59:54 +02:00
2c1c913213
adiv5.c: Add units found on M7.
2018-07-27 10:59:54 +02:00
f234074099
stm32h7: Start of support.
...
Implement probe, memory map, erase, write, uid, crc, parallelism.
2018-07-27 10:59:54 +02:00
a988bba035
Merge pull request #372 from richardeoin/efm32-1
...
[efm32] Add support for EFM32 devices with different DI and MSC layouts
2018-07-27 11:41:58 +12:00
d7b173ab39
Merge pull request #310 from UweBonnes/stm32l4r
...
arget/stm32l4.c: Add stm32l4r series and clean up.
2018-07-27 10:32:00 +12:00
b4dc666aca
Add nRF52 QIAA C0
2018-07-26 23:13:38 +01:00
4a312c7697
target/stm32l4.c: Add stm32l4r series and clean up.
2018-07-22 15:44:00 +02:00
7034d0bb94
stm32l4: Option byte loader must be started with flash unlocked!
...
Warn user that device will loose connection.
2018-07-22 15:44:00 +02:00
83f9655f6e
stm32l4: Fix wrong default for WRP2A option halfword.
2018-07-22 15:44:00 +02:00
139707c5c0
cortexm/detach: Add a dummy transaction after cleaning DHCSR.
...
This replaces the seemingly superflous swdptap_seq_out() at
the end of adiv5_swdp_low_access() needed to continue after detach.
2018-07-19 10:57:41 +02:00
a7106bd346
[efm32] Add support for flashing User Data (UD) and Bootloader (BL) regions
...
* UD region on all devices, some devices also have BL region
* Fix page size for EZR32HG
2018-07-18 08:57:01 +00:00
55bb96cfdb
[efm32] tidy compiler warning
2018-07-16 20:47:24 +00:00
98faaceb70
[efm32] Add support for EFM32 devices with different DI and MSC layouts
...
* DI layout is identified by attempting to read OUI from both layouts
* MSC address is passed to flashstub in r3
Retested EZR32LG230 (EZR Leopard Gecko M3)
Tested EFR32BG13P532F512GM32 (EFR Blue Gecko)
Achieves aims of PR #264 (I think) Thanks to @dholth and @ryankurte for inspiration
Fixes Issue #226
2018-07-16 20:18:36 +00:00
59d6eca8f0
Fixes option erase for STM32F070x6 STM32F070xB STM32F030xC
2018-07-10 18:44:05 +03:00
c5713ea8d3
Merge pull request #366 from UweBonnes/f7_fix
...
stm32f4.c: F76x also has large sector by default.
2018-07-07 13:03:14 +12:00
1b51c4961e
Merge pull request #363 from korken89/master
...
Removed debug bits for F4/F7 target, same as all other MCUs now
2018-07-07 13:01:05 +12:00
50514ccc31
stm32f4.c: F76x also has large sector by default.
2018-07-05 13:29:43 +02:00
5e8c8cae10
Removed debug bits for F4/F7 target, same as all other MCUs now
2018-06-28 16:31:34 +02:00
7a7266a0f7
Speed up JTAG.
2018-06-26 19:50:14 +02:00
Stoyan Shopov
Uwe Bonnes
Emilio Lopes
mean
Jonathan Giles
Noah Pendleton
Sean Cross
jbuonagurio
Richard Meadows
David A. Aguirre Morales
Gareth McMullin
Eivind Alexander Bergem
jxltom
Raghu
Damien Merenne
Matthew Skolaut
David Lawrence
Francesco Valla
Aled Cuda
Fredrik Ahlberg
Valmantas Paliksa
Dömötör Gulyás
Thomas Bénéteau
Mark Rages
Koen De Vleeschauwer
Alexey Shvetsov
Sid Price
Vegard Storheil Eriksen
Extreme kefir
zvova7890
Ondrej Mikle
Sid Price
Roland Ruckerbauer
Artur Maciuszonek
Thiadmer Riemersma
Ken Healy
Kirill Zhumarin
dpslwk
Daniel O'Connor
Dave Marples
Brennan Ashton
Sylvain Munaut
Stephen Roe
Simon Rasmussen
David R. Piegdon
Alexander Zhang
Jeremy Elson
Boris Sorochkin
newbrain
anyn99
Carl
Ingmar Jager
Josh Robson Chase
Ingmar Jager
Benjamin Vernoux
Mark Rages
Rik van der Heijden
Mike Walters
Richard Meadows
Antti Louko
Emil Fresk
