75b5e72a00
Fix typo
2020-09-16 18:41:56 +02:00
de01a75ca9
Fix broken link to bluepill pinout.
2020-09-15 20:58:10 +02:00
6d18a61b2e
hosted: Make ASAN build optional.
...
Use ASAN=1 on the make command line to activate,
2020-09-11 15:23:13 +02:00
120b3134bb
Add SAM4SD32C/B support.
2020-09-07 17:36:15 +02:00
8289862b55
gdb: Reset flash_mode with when erase or flash fails.
...
Thanks to Dave Marples <dave@marples.net>, extracted from #607
2020-09-04 15:17:29 +02:00
58281ec232
SWD Timing: Enhance SWD high time with low speed loss.
...
On F103 no high time < 80 ns and no low time < 100 ns was seen with a scope
2020-09-04 14:45:34 +02:00
af3480e523
hosted: Update Readme.md
2020-09-04 11:49:13 +02:00
6650831243
ftdi: Get turtelizer (JTAG only FT2232D dongle) going
...
FT2232D seems to dislike "Set TCK/SK Divisor" or
"Set Data Bits Low Byte" as first command on a non-first run
- Add printout when garbage is found
- Add "Disconnect TDI to TDO for Loopback" as first MPSSE command
(seemed to help!)
2020-09-04 11:49:13 +02:00
74b3baad1e
ftdi_bmp : Another size fix and small rearrangement.
2020-09-04 11:49:13 +02:00
aeb97466b9
libftdi: Automatically switch to JTAG if SWD is not possible.
2020-09-04 11:49:13 +02:00
ae8cb8ab46
ftdi_bmp: Reject writes with no data.
...
Pending transfers made the MPSSE behaviour strange and unpredictable.
2020-09-04 11:49:13 +02:00
c41ab1738e
ftdi/swdptap: Use parity builtin. Fix array width.
2020-09-04 11:49:13 +02:00
34d0f8a2a1
ftdi: Recognize bitbang SWDIO settings.
2020-09-04 11:49:13 +02:00
6ac0a25123
ftdi: Add UM232H as probe.
2020-09-04 11:49:13 +02:00
d73a6a3d29
platform/ftdi: Do not double initialize.
2020-09-04 11:49:13 +02:00
f0b0639189
ftdi: Output wire debug.
2020-09-04 11:49:13 +02:00
e95e5e3fba
ftdijtag: Really enable TMS/TCK/TDI driver.
2020-09-04 11:49:13 +02:00
f4eed249eb
hosted/ftdi: Allow to list supported cables.
2020-09-04 11:49:13 +02:00
8a2bce26f2
Hosted: Fix memory leak when platform_swdptap_init fails.
2020-09-04 11:49:13 +02:00
7b497302c0
hosted/ftdi: Autodetect ftdi cables with distinguishing feature.
2020-09-04 11:49:13 +02:00
a83e76bef9
libftdi: Add USBMATE.
2020-09-04 11:49:13 +02:00
c78066255d
libftdi: Infrastructure to test for target voltage present.
2020-09-04 11:49:13 +02:00
aff624b6e0
libftfdi: Allow to specify external resistor SWD connection.
...
More explanations in src/platforms/hosted/Readme.md
2020-09-04 11:49:13 +02:00
eabf45357d
libftdi: Reinitialize pins when switching JTAG/SWD.
2020-09-04 11:49:13 +02:00
05534e9b49
libftdi/swdptap: Provide SWD using generic MPSSE if hardware allows.
2020-09-04 11:49:13 +02:00
40ba261982
libftdi: Use asynchronous transfers if header indicate newer libftdi1.
...
This is a hack to keep travis happy. Setting up travis to use a recent
libftdi1 is a major issue.
2020-09-04 11:49:13 +02:00
9b6e19785e
Implement SRST for libftdi.
...
Travis GCC needs -Wno-missing-field-initializers or will otherwise warn.
2020-09-04 11:49:13 +02:00
dea4be2539
Add ifdef to check for libftdi 1.5 to use ftdi_tcioflush instead of ftdi_usb_purge_buffers
2020-08-21 13:10:55 +02:00
7e1b0321e2
Cleanup Makefiles for hosted bmp on darwin
2020-08-21 11:28:17 +02:00
5908fc2da1
Add serial auto-connection to darwin target
2020-08-21 11:28:17 +02:00
e75eb19d78
cmsis_dap: Detect CMSIS-DAP before STLINK
...
Debugger may be realized with the ST USB Vendor ID.
2020-08-16 15:20:58 +02:00
998a9747f8
cmsis_dap: Make some errors more prominent.
2020-08-16 15:20:58 +02:00
c97c4a0960
hosted: Better decoding for ap_decode_access().
2020-08-16 15:20:58 +02:00
badff20099
cmsis_dap.c: Fix dap_dp_read_reg.
2020-08-16 15:20:58 +02:00
f65afb1588
Use correct IAP entry address for LPC84x
2020-08-14 20:00:18 +02:00
dd74ec8e6f
stlinkv2: Detect fail mem_read on jtag too.
2020-08-05 16:20:52 +02:00
805cfbdcb5
Build hosted for widows with hidapi static linked.
2020-08-03 18:59:50 +02:00
fca8593d92
serial_win: Find BMP comport by serial number.
2020-08-03 18:59:50 +02:00
3eb51ce94f
serial_win.c: Copy the enough of the device name.
2020-08-01 14:00:17 +02:00
11217f8a45
serial_win: GDB needs to handle DTR.
2020-08-01 14:00:17 +02:00
71e9d78210
adiv5.c: Add another ARCH_ID found STM32F205.
2020-08-01 14:00:17 +02:00
1b12e407fd
adiv5: Add missing arch identifiers for Cortex-M7 ETM.
2020-07-31 11:53:15 +02:00
71e5b4d3cb
hosted/stlinkv2.c: Fix bug introduced with #703
2020-07-29 13:42:07 +02:00
72387164eb
hosted/stlinkv2.c: Handle AP_WAIT error when switching to SWD
2020-07-29 12:22:18 +02:00
a392480631
hosted/stlinkv2.c: Use V2 API to read coreid.
2020-07-29 12:22:18 +02:00
696daa8352
adiv5: fix debug print of dev_type
...
Since dev_type is an 8 bit unsigned integer, use the PRIx8 macro instead
of PRIx32.
2020-07-29 11:32:24 +02:00
64cf30e4cd
Rework/update/add Readme.md in the platforms directories.
2020-07-29 10:32:49 +02:00
726d4b4496
adiv5.c: Add missing DEVTYPE and ARCHID to some existing PIDRs(#698,#699)
...
Probably more additions are needed.
2020-07-14 16:26:32 +02:00
52bfe538e3
cdcacm.c: Set bMaxPacketSize0 to 32 ( #693 , #697 )
...
Smaller bMaxPacketSize0 resulted in delayed enumeration when BMP firmware
is started by the STLink bootloader.
2020-07-14 15:57:03 +02:00
09ceaea70f
adiv5_swdp: Fix another memory leak.
2020-07-14 15:02:13 +02:00
2ae62433d2
Merge pull request #690 from themadinventor/arm_v8m
...
Add ROM table support for Cortex-M33 and Cortex-M23
2020-07-13 10:56:03 +02:00
a673efc26b
Remove extra definitions of jtag structures in the STLink hosted setup to support "gcc (GCC) 10.1.0" on Archlinux
2020-07-12 23:14:19 +02:00
7ebb94d134
cortexm: Add comment on CPUID register
2020-07-12 22:54:39 +02:00
4391851f4d
adiv5: Change component descriptions from MTB to Micro Trace Buffer for consistency
2020-07-12 22:29:04 +02:00
0aadd0abce
Adiv6: Add comment on DEVTYPE and ARCHID fields with references
2020-07-12 22:27:46 +02:00
fcd945a529
cortexm: Read CPUID to identify core version
2020-07-12 12:08:22 +02:00
39a20d78ff
v8m: only check relevant bits in DHCSR when polling in cortexm_forced_halt
2020-07-12 12:07:12 +02:00
a35e9c8e5c
Adiv6: Read DEVTYPE and ARCHID to identify Cortex-M23 and Cortex-M33 debug components
2020-07-12 12:00:31 +02:00
661f78033a
stm32f1: Add F1 XL with dual bank handling,
2020-07-08 14:31:58 +02:00
fc6ca5bc06
Remote: Add procedure to test if high-level remote functions are available
...
Removes need for updated version string.
2020-07-08 14:15:35 +02:00
bfda64c656
stlink: Remove unused double defined variable "running_status"( #683 )
2020-07-02 19:44:31 +02:00
85d35b75ce
libftdi/jtagtap_tdi_tdo_seq: Remove dubious Null termination.
2020-07-02 14:56:10 +02:00
a4cdd6b310
hosted: Report missing USB access rights only if no debugger found.
2020-06-07 16:29:19 +02:00
eabd69dcdb
Adiv5: Protect DBG/SYSTEM Power-Up request with timeout too.
...
CMSIS-DAP without connected target looped infinite in that situation.
2020-06-07 13:14:32 +02:00
e35025d214
CMSIS_DAP: Warn when hidapi-libusb is not found.
2020-06-06 15:28:53 +02:00
5097a23196
jlink: Fix wrong sized array.
2020-06-06 15:28:53 +02:00
4ede113ca7
hydrabus: Disable DFU file generation untit somebody fixes dfu-convert.py
...
This allows "make all_platforms" to succeed on python3 only systems.
2020-06-05 16:23:28 +02:00
aabd07738e
cl_utils: Use start of flash in memory map as default flash start.
2020-06-05 14:59:30 +02:00
425002a38f
hosted: Add -l argument to list only available debuggers and exit.
2020-06-05 14:59:30 +02:00
dc3fd2eb06
Classify debug messages
...
Firmware BMP with ENABLE_DEBUG=1 will print WARN and INFO as before.
PC-Hosted BMPwill alway print to stderr. Warn is printed unconditional,
INFO, GDB, TARGET, DONGLE and WIRE will print if their appropriate bit in
cl_debuglevel is set via the -v verbose command line argument.
INFO will go to stdout with -t or -l.
2020-06-05 14:59:30 +02:00
9ade8b24f7
hosted: Add Readme.md
2020-06-05 14:59:30 +02:00
4698a26bab
common/swdptap: Slight speed increase and better setup time for write.
2020-06-05 14:59:30 +02:00
64f3dff8a8
PC-Hosted: Better debug output.
2020-06-05 14:59:30 +02:00
b06c0ba8d5
bmp_remote: Use high level functions.
...
Based on #570 (OpenOCD HLA interface driver for Blackmagic), but now
usefull for bmp-remote.
2020-06-05 14:59:30 +02:00
921c23eb74
serial_unix: Return instead of exit in case of error.
2020-06-05 14:59:30 +02:00
ef558eebb8
CMSIS-DAP support.
...
Thanks to edbg, pyocd and openocd for code and ideas.
2020-06-05 14:59:30 +02:00
4ba6afed28
Add jlink pc-hosted platform.
2020-06-05 14:59:30 +02:00
efce2ae892
Do not compile jtagtap and swdptap when not needed.
2020-06-05 14:59:30 +02:00
da45281696
GetTargetVoltage: Print info about voltage only when info is relevant.
2020-06-05 14:59:30 +02:00
ef816e3183
hosted: add libftdi implementation, remove old implementation.
2020-06-05 14:59:30 +02:00
ab7991c3a6
hosted: Add bmp_remote, remove old pc-hosted platform.
2020-06-05 14:59:30 +02:00
13c3c934d2
Hosted: Add Stlink, remove old pc-stlinkv2 platform
2020-06-05 14:59:30 +02:00
09602a9e74
serial_unix: Simplify timeout setting.
2020-06-05 14:59:30 +02:00
8fea3f6baa
pc/serial_xx: Change arguments for the open call.
2020-06-05 14:59:30 +02:00
a09104c281
Build firmware executables as *.elf file
2020-06-05 14:59:30 +02:00
dd022fcb44
platforms/pc: Add common usb utilities.
2020-06-05 14:59:30 +02:00
52739def01
Copy relevant stlink files.
2020-06-05 14:59:30 +02:00
386a4bfce7
hosted: Device detection and selection.
2020-06-05 14:59:30 +02:00
3290def5f8
Add empty compilable project.
2020-06-05 14:59:30 +02:00
c3d509e6c0
Clean up PLATFORM_HAS_DEBUG
...
Use only for firmware platforms.
2020-06-05 14:59:30 +02:00
9a46c6fd25
Allow BOARD_IDENT as function
2020-06-05 14:59:30 +02:00
563df2d354
Detour ADIv5 high-level functions.
2020-06-05 14:59:30 +02:00
9969c984f3
detour jtag primitives.
2020-06-05 14:59:30 +02:00
e34a27f72c
Detour swd primitives.
2020-06-05 14:59:30 +02:00
1e10b96b03
Allow multiple scan routines.
2020-06-05 14:59:30 +02:00
b0cf7d24bd
adiv5.c: Fix another leak.
2020-06-05 14:59:30 +02:00
783ec377d9
adiv5: Export extract.
2020-06-05 14:59:30 +02:00
eee16cf08a
platforms/tm4c/jtagtap.c: Remove unreferenced and incomplete file.
2020-06-05 14:59:30 +02:00
f3790b90e5
command.c: Simplify usage of serial_no serial number string.
2020-06-05 14:59:30 +02:00
966ac4036d
target.c: Check for valid flash structure.
2020-06-05 14:59:30 +02:00
60f39f55b4
MSP432: Warn when hardware version not supported.
2020-06-05 14:59:30 +02:00
7956fbc361
cl-utils: Print memory map when test is specified.
2020-06-05 14:59:30 +02:00
b5182e09d0
cl_utils: When reading from flash to file, truncate the file.
2020-06-05 14:59:30 +02:00
8db979798c
cl_utils.c: Report read/write speed.
2020-06-05 14:59:30 +02:00
c5d0902d4c
cl_utils: Fix memory leak.
2020-06-05 14:59:30 +02:00
815e09bb1b
cl-utils: Add more arguments
2020-06-05 14:59:30 +02:00
05adcd9bf5
remote.c: Compile only relevant functions.
...
Do no compile firmware functions when compiling pc-hosted.
2020-06-05 14:59:30 +02:00
16967b4328
adiv5: Remove only local dp_idcode used from ADIv5_DP_t struct.
2020-06-05 14:59:30 +02:00
b8b34e7b1d
adiv5: remove cfg for AP structure, cfg is only used local.
2020-06-05 14:59:30 +02:00
34a13723d8
Decrease the control USB pipe size on f103 blackmagic probes to 8 bytes
...
Rationale:
In USB device mode, the f103 chip provides 512 bytes
of memory for USB traffic. In the 'master' branch
of the blackmagic probe, the control endpoint pipe size
is set to 64 bytes, effectively consuming a quarter
(1 'in' endpoint, 1 'out' endpoint == 2 endpoints,
2 /* endpoints */ x 64 /* bytes per endpoint */ == 128 bytes
out of 512 /* bytes of precious usb packet memory */).
The USB standard, for full speed devices, does allow
a control endpoint size of 8 bytes.
I am not too aware of all the details of the USB standard,
but the USB standard seems to allow fragmented transactions
on the control USB pipe (endpoint 0), which libopencm3
apparently supports:
libopencm3/lib/usb/usb_control.c:usb_control_send_chunk()
I am using this change (from 64, to 8 bytes)
on a windows 10 machine, on an stlink hardware
('PROBE_HOST=stlink'). It works on my machine.
This change can potentially provide other USB endpoints
in the blackmagic firmware with more memory
2020-06-05 13:58:08 +02:00
69e330849d
fix flash map for STM32G431, as it is a special case different from the STM32G47x and STM32G48x chips
2020-06-05 13:41:18 +02:00
f9f928e9d6
Add support for LPC8N04
2020-06-05 12:33:51 +02:00
34c0d5a1c9
When timeout is 0, `timeout_is_expired()` should return immediately.
2020-06-05 12:33:24 +02:00
6eb1b09c1c
pc-hosted semihosting
2020-05-27 12:51:29 +02:00
541861e978
traceswo decoding
2020-05-16 15:04:35 +02:00
54ee00b0f6
set semihosting sys_clock time origin
2020-05-13 17:50:39 +02:00
499309f648
stm32f1: Tell user about STM32F10(3) clone.
2020-05-13 13:07:55 +02:00
1a83bc6892
Rename variant_string in efm32 samd samx5x ( #659 )
...
* Rename variant_string
Files efm32 samd samx5x uses same function name that collides during
linking (checked with gcc10)
Signed-off-by: Alexey 'Alexxy' Shvetsov <alexxyum@gmail.com>
* Also make xxx_variant_string static
Signed-off-by: Alexey 'Alexxy' Shvetsov <alexxyum@gmail.com>
2020-05-12 17:47:04 +02:00
805464db23
Fix redefinition of io function
...
Now it should work fine with any gcc version. Old one produces error
like in #657
Signed-off-by: Alexey 'Alexxy' Shvetsov <alexxyum@gmail.com>
2020-05-10 10:58:03 +02:00
9b939f4a3a
stm32f4: Fix option byte handling ( #654 )
...
Option bytes are not accessible with level 1 protection, so
Use FLASH_OPTCR(x)
Fix crash with "mon opt write xxxx"
Handle option manipulation better when HW Watchdog fuse is set
Allow abbreviated "mon option x<yyy>" commands
2020-05-05 12:52:32 +02:00
923949d5dd
Fixed variable/function name clash building on Windows
2020-05-03 15:45:31 +02:00
9f8c7be360
semihosting
2020-05-02 12:55:29 +02:00
d63e870e82
cdcacm: Fix UART interface OUT endpoint MPS in descriptor.
...
3e3e450Fixes #538
2020-05-01 12:39:40 +02:00
08bb4d5775
pc-hosted: Make JTAG work.
2020-04-27 20:30:51 +02:00
8851504a41
new semihosting commands
2020-04-23 09:43:46 +02:00
ada17ada23
stm32f4/7: Always use largest flashsize for device family ( #633 , #635 , #644 )
...
Do not care for the FLASHSIZE register. Leave it up to the user to abuse
flash area the ST did not announce.
2020-04-21 17:04:07 +02:00
164eb43f00
NRF5: Do not reset target options.
2020-04-14 19:01:43 +02:00
bea8436561
NRF5: Always set CORTEXM_TOPT_INHIBIT_SRST( #230 )
...
The problem also happens with NRF52840. Set CORTEXM_TOPT_INHIBIT_SRST
for all NRF5 device.
People should be more persistent!
2020-04-14 18:11:23 +02:00
d1468530bd
add basic support for LPC11U68 (and maybe LPC11U68)
2020-04-06 23:36:49 +02:00
846dadcc39
lmi: add support for TM4C1294NCPDT
2020-04-03 19:42:24 +02:00
58a8571d5b
stlink: Print Target voltage
...
This adds about 600 bytes.
2020-04-03 16:19:20 +02:00
8a9980cd06
pc/serial_unix: bump device path buffer size to 4096 bytes
...
Since dp->d_name can be up to 255 bytes long and the 'name' buffer variable is
is a superset of it, bump the size of the latter to 4096 bytes (correspoding
to PATH_MAX on Linux systems).
2020-04-03 11:05:11 +02:00
b4ab9f328e
pc-hosted: Put serial handling in own files for unix and implement for windows.
...
- If host provided /dev/serial/by-id, device must not be given and
multiple devices may be selected with -s <(partial) serial number>
- On windows, device must by specifies with -d
2020-03-31 17:02:56 +02:00
18ae2bb50d
cl_utils.c: Include <windows.h> for windows builds that work on files.
2020-03-31 17:02:56 +02:00
1a0cee4e9d
pc-hosted: Clean up Makefile.inc.
2020-03-31 17:02:56 +02:00
bd73adf9c7
bmp/pc platforms: Deduplicate code.
2020-03-31 17:02:56 +02:00
9ca401497c
stm32/timing_stm32.c: Remove fixed constants and direct SCB access
2020-03-31 16:54:04 +02:00
c4d7232223
Export function to read out PIDR and use for samd and samx5x.
2020-03-26 19:05:57 +01:00
a0e42e229b
Make more things static.
...
No functional change intendend.
2020-03-26 18:44:19 +01:00
eca3a8dd8f
pc-stlinkv2: Make stlink_usb_get_rw_status static and allow to suppress errors
...
This helps to not overflow the console.
2020-03-26 17:56:12 +01:00
91d7656d86
stlink/bootloader: Really allow to detach.
...
- To reenumerate, rcc_periph_reset_pulse(RST_USB) seems enough.
- Document bootloader entry and exit behaviour of ST-LINK V2
- Document bootloader entry on ST-LINK V2-1
2020-03-26 17:15:32 +01:00
890b494290
pc-stlinkv2: Update README.md
2020-03-26 12:21:22 +01:00
effd43ce38
Harden cortexm_reset() and remove double reset( #601 )
...
Thanks to Dave Marples <dave@marples.net> for input.
- Issue only one reset. Start with SRST. Only if not seen, use SYSRESETREQ
- Wait for release of DHCSR_S_RESET_ST before issuing more commands
- Add timeout to catch reset line stuck low
- Remove AP errors
2020-03-25 11:22:14 +01:00
2e185ba578
BMP/PC: Allow to compile with mingw64 ( #615 )
...
__USE_MINGW_ANSI_STDIO 1 must be set befor any windows specific included.
2020-03-24 17:59:13 +01:00
2b76ec0ea3
dfucore: Reject erase outside the allowed range
...
An illegal erase request may get emitted as the DFU program may erase
first. Checking before flashing is not enough.
2020-03-22 16:38:54 +01:00
a7efe7cc14
cl-utils: Display targets found.
...
+ other small changes in DEBUG output.
2020-03-10 17:34:30 +01:00
65cb886bb6
Export connect_under_reset.
2020-03-10 11:44:53 +01:00
2065c70888
adiv5: Split PRIx64 into two PRIx32 as nanolib does not support PRIx64.
2020-03-10 10:56:42 +01:00
75186f7d50
ADIv5: More CoreSight device decoding:
...
- MTB-M0+ (Simple Execution Trace)
- M33: Devices need finer decoding (DEVTYPE at offset 0xfcc)
2020-03-08 22:37:59 +01:00
c7e7bd61b6
stlink: Do not wait for the reaction on the reset line.
...
pc-hosted will abort, if the reset line is held externally to some value.
As assert is either driven or driven open drain, we can assume assert
immediate. For deassert, logic levels differences between the debugger and
the debuggee may apply and other ways to check the result are needed, like
CORTEXM_DHCSR_S_RESET_ST.
2020-03-08 16:27:03 +01:00
e48d9ebc92
cl_utils: Allow to connect under reset.
2020-03-06 23:15:56 +01:00
919d9320fd
Remove unrelated files.
2020-03-06 19:33:20 +01:00
05dc2e239e
pc-hosted: Disable TPWR when blackmagic command line interaction terminates.
2020-03-06 17:16:33 +01:00
c94a03af48
STM32F1 High density devices DFU support( #587 )
2020-03-05 19:58:55 +01:00
288620551f
adiv5: Print out SYSROM PIDR.
...
We need to know more about what devices indicate proper PIDR and what
devices fail to do so.
2020-03-04 19:02:07 +01:00
8c959defca
efm32: Make local functions static.
2020-03-04 18:44:40 +01:00
13b9fe1efc
cl_utils: There is no need for a (dummy) target controller.
...
Fix for #593 .
2020-03-04 16:57:05 +01:00
03d84d0d5c
command line tools: Allow to set power.
2020-02-20 12:12:26 +01:00
7a595ead25
fixup F103x8 flash size before build dfu iface string
...
we handle F103x8 as F103xB with 128k flash
2020-01-22 16:01:39 +01:00
45fb12f9b6
cl-utils: Care for -j (JTAG) argument in test mode.
2020-01-21 11:49:45 +01:00
1a1cabc90b
Remove explicit include of rcc.h and allow common file to steer the right file
...
Clean up DFU files with MCU explicit includes
2020-01-14 00:09:20 +01:00
2137e775a4
stlink: update docs on how ti reflash BMP back to STLink original firmware ( #572 )
...
* stlink: update docs on how ti reflash BMP back to STLink original firmware
* stlink: specify v2 in docs on reflashing back
2020-01-11 16:52:22 +01:00
ee553c9a50
Corrected error checking for socket functions ( #577 )
2020-01-11 16:47:02 +01:00
c3a3f7737f
Hosted: Allow command line interaction.
2019-12-13 14:59:42 +01:00
ee316431f5
stlink for st-bootloader: Reset with platform_request_boot()
...
Both V2 and V21 switch to (ST) bootloader with powered reset.
2019-12-13 14:59:42 +01:00
470c8e8cf1
target_flash_erase: Do not crash when requesting erase of unavailable flash.
...
Allow to erase from command line.
2019-12-13 14:59:42 +01:00
b9eb467ecf
Command line: Restrict verify to length of binary file.
2019-12-13 14:59:42 +01:00
269d38ce65
cl_utils: Allow to issue reset.
...
Issue reset only when flashing or when reset was requested.
2019-12-13 14:59:42 +01:00
da5a0cd3f5
Infrastructure for command line interface to target
...
- Program, read and verify flash
- Test mode: Probe and attach to device and exit
2019-12-08 16:43:19 +01:00
ab396f9745
Allow %z specifier in windows builds. Supercedes #562 .
2019-12-08 16:43:19 +01:00
1bef51e145
adiv5: Abort scanning APs after 8 void APs.
2019-12-08 16:43:19 +01:00
6d01c3c55b
stlinkv2: Propagate AP errors
...
Needed when reading some memory region of unknown size.
2019-12-08 16:43:19 +01:00
bdd76de517
Erase: Fix endless erase when erase-area did not end on (page|block) boarder.
2019-12-08 16:43:19 +01:00
25d24e5c34
efm32: Allow to compile with -Og.
2019-12-08 16:43:19 +01:00
5943552a6b
[efm32] Probe for the EFM32 Authentication Access Port (AAP)
...
Supported functionality through this AP:
* Issuing a DEVICEERASE command
2019-12-08 16:21:02 +01:00
260fc88d8f
[efm32] Add command to set and print bootloader enable status
...
This is a bit in the Lock Bit (LB) flash page, so it can only be
cleared by this routine
2019-12-08 16:17:02 +01:00
7f0d5febc3
[efm32] Print MSC Interrupt Flags to DEBUG after each flash write
2019-12-08 16:16:55 +01:00
e85df763b7
[efm32] add new devices PG12B, JG12B, GG11B, TG11B, GG12B
...
Rework MSC layout check
2019-12-08 15:55:12 +01:00
f89542c79f
Merge pull request #203 from dlaw/master
...
Add LPC11xx command to read out unique ID from target. Restore Ram and registers after call.
2019-12-08 15:45:49 +01:00
5ec12e4103
Support arbitrary bit counts jtagtap_tdi_tdo_seq pc-hosted
2019-12-08 14:34:35 +01:00
d42477ebc5
Fix infinite loop in jtagtap_tdi_tdo_seq
2019-12-08 14:34:35 +01:00
f10ccfd83e
f4discovery: Fix error with GCC9 being more picky with sizes.
2019-12-05 19:36:05 +01:00
8a07f44435
Add support for the kinetis KL16Zxx devices. Tested on KL16Z128VFM4 custom hardware
2019-11-21 20:37:13 +01:00
1924aa4999
Make baudrate parameter of traceswo command mandatory for stlink/swlink, and superfluous on other platforms; change help message accordingly.
2019-11-19 20:20:13 +01:00
e7e34600a4
lpc11: Only print Idcode if not zero and not yet handled.
...
Otherwise for all Cortex-M not yet handled this LPC messages appears.
2019-11-17 13:24:39 +01:00
9198c951bb
Reduce flash space required for SAM D51/E5x driver
...
* Reuse functions that are common with the SAM D1x/D2x driver
* Only include the mbist and write8/16/32 user commands if
SAMX5X_EXTRA_CMDS is defined
2019-11-17 12:45:49 +01:00
d3c330ea1a
Fix issues with Travis CI build
...
It appears the Travis version of gcc-arm-none-eabi doesn't allow the %x
printf format specifier for size_t arguments, in contrast with the
version I'm running on Ubuntu 18.04 (15:6.3.1+svn253039-1build1).
2019-11-17 12:45:49 +01:00
26216beaab
Microchip SAM D51 / E5x support
...
Adds a target driver for Microchip SAM D51 / E5x family.
Tested on SAMD51G19A and SAMD51J19A. According to the datasheet, the
D51 / E5x family share the same core feature set, differing only in the
addition of CAN (E51) or ethernet controllers (E53/54). All members of
the family should be equivalent from a debug and programming perspective.
2019-11-17 12:45:49 +01:00
5a05cedd7d
pc-hosted/jtagtap.c: Handle DO as bytes (PR #552 )
...
Fixes #540/#542
2019-11-10 17:36:58 +01:00
28f0ced97e
Support NXP LPC1343
2019-11-09 18:47:07 +01:00
67f9d26644
samd: Add support for L21 & L22 (PR #345 )
2019-11-09 13:59:37 +01:00
04d9749f25
Makefile: Publish DFU binaries with the daily build. ( #549 )
...
Fixes #548 .
2019-10-28 16:37:41 +01:00
76f9a6ad42
stm32: Portability changes.
2019-10-20 22:20:06 +02:00
b9249fe104
adiv5: Activate DP reset sequence, guarded with timeouts.
...
While not working on most STM32, it succeeds on STM32G474.
Thanks to Dave Marples <dave@marples.net>
2019-10-20 22:15:28 +02:00
c6f43cf23f
Stlinkv2: Always call stlink_leave_state() first.
...
V2 devices after power on are in DFU mode. It is needed to leave DFU before
doing anything else.
2019-10-19 20:57:26 +02:00
58febdff79
Fixed tokenization of gdb monitor commands.
2019-10-19 13:25:26 +02:00
2eef202ee1
Use pkg-config to get CFLAGS & LDFLAGS for libftdi1
...
Pull request #535
2019-10-14 19:22:53 +02:00
0aedff6623
Set the accepted to socket to be blocking as that is what the code expects.
...
This is necessary on OSX (and probably BSDs) where they default to non blocking which causes recv() to return -1 with errno set to EAGAIN.
2019-10-14 12:45:10 +02:00
4a8cba0e9c
Add support for LPC1114/333 (LPC1100XL series)
...
This is not given in the user manual but the register immediately
following DEVICE_ID does apparently contain the correct part ID.
2019-10-13 13:01:19 +02:00
5c805c7d35
Fix buffer overflow in adiv5_component_probe()
2019-10-12 11:44:08 +02:00
90df8172ca
Addition of pc-hosted variant and extensions to other targets to support it.
2019-10-08 19:16:12 +02:00
8a1d8bfba3
Stlink: Variant for Stlink V2 that works with the original ST bootloader.
...
Use https://github.com/jeanthom/stlink-tool.git for encrypted upload and
switch to BMP.
2019-10-08 18:18:19 +02:00
0ae7cea1ae
Add LPC84 from UM11029, Rev. 1.4, tested on LPC845 Breakout board.
2019-10-08 18:17:43 +02:00
12a2659671
pc-stlinkv2: StlinkV3 seems only to work with STM devices,
2019-09-29 16:48:42 +02:00
0599d2161c
pc-stlinkv2: Recognize another error and try to handle failing memread.
2019-09-29 16:48:31 +02:00
1cf0b8ac13
Make all arguments for all commands (struct *t, int argc, const char **argv).
...
-Wall on gcc8 otherwise warns without -Wno-cast-function-type but older
GCCs/CLang choke on that argument:
error: unknown warning option '-Wno-cast-function-type'; did you mean
'-Wno-bad-function-cast'? [-Werror,-Wunknown-warning-option]
This adds 24 byte to the binary, as some functions are now called with
additional dummy arguments:
"Pushing and popping garbage to keep the system happy"
2019-09-29 12:44:55 +02:00
f010a567bd
adiv5: Reject APs duplicating last AP.
...
Seen with TM4C129 on black MSP432R401 Launchpad. Scanning of APs is aborted,
so valid APs after duplicated APs are ignored.
2019-09-29 12:44:37 +02:00
afbde05cd3
Linker: Recent libopencm3 linker already sets the stack.
...
Thanks to Sid Price for noticing #520 .
2019-09-23 22:48:21 +02:00
fae2966b72
Target: Default to nop-function() for all exported target functions.
...
Fixes #522 .
2019-09-23 17:42:29 +02:00
3a6947a68f
stlink: Check for baite variant. ( #519 )
...
If PC13/14 float and PB11 is pulled high, recognize as baite.
Handle as rev.1 board. Deciphered from:
http://www.avrki.ru/picture/articles/samodelniy_st_link_v2/shemf_st_link_v2.jpg
2019-09-05 20:37:16 +02:00
609e6b135d
nrf51: Add nop_function as halt_poll. ( #517 )
...
Otherwise "tar ext ...; mon s; att 2; quit", start new gdb "tar ext ..."
crashes, at least on pc-hosted platforms.
2019-09-04 13:50:13 +02:00
6663da7ff5
cortexm.c: Fix DWT Mask ( #516 )
...
See #513
2019-09-04 13:28:55 +02:00
00937348b3
Fixes to compile "make ENABLE_DEBUG=1 all_platforms" ( #515 )
2019-09-04 13:09:43 +02:00
7dcb3295c6
Native: Link against nanolib. ( #514 )
...
This frees about 13 kB or 30 kB with ENABLE_DEBUG=1
2019-09-04 12:51:30 +02:00
e6504e149b
cortexm: Implement single register read/write
2019-09-01 20:38:38 +02:00
7bcf7f4924
cortexa: Implement single register read/write
2019-09-01 20:38:38 +02:00
20cad17ce3
target: Implement generic multi-register read/write
2019-09-01 20:38:38 +02:00
19a8078f99
gdb: Implement 'p' and 'P' register access
2019-09-01 20:38:38 +02:00
9f4cf4124e
target: Add new methods for read/write individual regs.
2019-09-01 20:38:38 +02:00
1d868bfffb
pc-stlinkv2: Detect stlink detach.
...
As libusb has no real async callback, we need to call libusb_handle_events()
in different places. While waiting for the gdb connection, we set the
socket to non-blocking and check additional for usb events in that loop. That
way, detach is also detected while waiting for connection. With debugger
attached, SET_IDLE_STATE ist missused for checking for usb events.
2019-09-01 12:19:14 +02:00
6f1cae9203
pc-stlinkv2: Wait for device attach.
2019-09-01 12:19:07 +02:00
86d0be9708
pc-hosted: Display morse message on controlling terminal.
2019-09-01 12:11:51 +02:00
80a9fd51ca
Clarify STM32F103x8 Flashsize handling.
...
Should finally fix #471 .
2019-09-01 12:11:51 +02:00
d39dc34382
pc-stlinkv2: Fix reg_read|write
...
- Fix wrong placed brace in cortexm_regs_write()
- Start writing with r0
- With register read, save only registers listed
2019-09-01 12:11:37 +02:00
d1ee827b4d
pc-stlinkv2: STLINK_SWD_DP_ERROR seem unrecoverable. Throw exception.
2019-08-31 11:20:17 +02:00
0d61106f90
pc-stlinkv2: Remove redundant read of CoreID.
2019-08-31 11:20:17 +02:00
aef055bb6f
adiv5: If setup AP0 fails, fail immediate.
2019-08-31 11:20:17 +02:00
a01109543e
pc-stlinkv2: Return failure if STLINK_DEBUG_APIV2_INIT_AP fails.
2019-08-31 11:20:17 +02:00
d994565f2e
pc-stlinkv2: Fix crash with serial given not matching connected devices.
2019-08-31 11:19:13 +02:00
2b7d4c5ade
swlink: Remove redundant conditional usbart_init().
...
Noticed in #506 .
2019-08-28 11:39:03 +02:00
35cb4e51e4
Windows Build Fixes GNU make 4.2.1 ( #502 )
...
After update of GNU make the tests for Windows OS are no longer needed. Note that GNU make 4.2.1 is used to build BMP under Windows OS.
Make native working
Again, the newer version of GCC make does not need the OS tests.
2019-08-28 10:45:41 +02:00
5d59338de5
pc-stlinkv2: Try first to reset device if we read a strange version number.
2019-08-27 15:13:26 +02:00
44f471db53
pc-stlinkv2: READMEM_8BIT needs to read 2 bytes for 1 byte requested.
...
Fix as seen in openocd.
SYSROM_PIDR2 has only 3 bits for the JEP106 identity code field, bits [6:4].
2019-08-27 15:13:26 +02:00
82be49f052
Stlink: Add a README.md, mostly deprecating reflashing Stlinkv2/1.
2019-08-27 15:13:26 +02:00
5fbb3a44fd
PC-STLINKV2/Libftdi: Better version string.
2019-08-27 15:13:26 +02:00
fa27649f87
Remove debug_bmp command on PC hosted platforms.
2019-08-27 15:13:26 +02:00
6bf4fd3598
pc-stlinkv2: CPU register read and write must be done with the AP set.
...
FIXME: Writing CPU registers on M4 of STM32H745 seems not to work.
2019-08-27 15:13:15 +02:00
443ced62d4
Target latest libopencm3
...
Required fixes:
* use usbd_request_return_codes -- commit 54b117c5a5767df8dc114612dfd8e8cb88b72c6b
* drop deprecated timer_reset() -- commit 034dbf20ff8c54dcbee5238390b37a0d35180f44
* drop 48 & 120 MHz configs -- commit a9dde2832eb8039b9e0d21a50b9b991ddbfc4e2d
* ld scripts: drop duplication of standard sections -- commit 9a05dcb6c0aef712052d337457838f6041ffd57a
2019-08-14 00:57:15 -07:00
4289788e0b
src: Replace sprintf with snprintf
...
snprintf is needed anyway, that's one less function to have :p
And it's bad practice anyway.
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
2019-08-05 15:43:33 +02:00
1d4152a36f
target: Make sure variant_string is consistent in size
...
It's a global symbol and LTO will complain if the one in this file and
the one in EFM32 target are inconsistent.
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
2019-08-05 15:42:29 +02:00
544bcd9845
build: Allow support for .S assembly file in SRC
...
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
2019-08-05 15:41:46 +02:00
804ec24df9
build: Apply OPT_FLAGS after platform Makefile.inc include
...
This allows the platform to specify another optimization level than
the default (like -Os if space is limited)
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
2019-08-05 15:29:00 +02:00
ef372d0161
build: Use a separate NO_LIBOPENCM3 flag to disable libopencm3
...
This prepares to allow other architectures than pc
that don't use libopencm3.
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
2019-08-05 15:24:16 +02:00
06078a8a98
stlinkv2.c: Ignore zero length memory transactions.
2019-07-28 16:28:18 +02:00
d92635b6a3
stlinkv2: Use stlink_usb_get_rw_status() where possible.
2019-07-28 16:27:52 +02:00
1b3acf3b8a
pc-stlinkv2: Print serial number of V20 devices readable.
2019-07-20 13:34:21 +02:00
e29f2b4fb9
jtag/swd: Rename defines/make variables to allow removal of weak attribute
...
jtagtap.c is libopencm3 generic. Move to common.
2019-07-18 20:54:10 +02:00
067956266c
Adiv5: Remove weak attribute to ease windows compile.
2019-07-18 18:16:19 +02:00
9e898cc4b8
adiv5: Add more coresight part numbers found on STM32MP157c-DK2 ( #492 ).
...
Only print corename if not NULL.
2019-07-18 17:39:48 +02:00
b9249ca8a6
stlinkv2: Recognize V21_MSD, e.g. on STM32MP157C-DK2.
2019-07-17 17:38:21 +02:00
dd3cb193f3
Indicate the Core in the Target list.
2019-07-17 17:38:21 +02:00
c44cb904b0
adiv5.c: Format debug output more tense.
2019-07-17 17:38:21 +02:00
205fce20e5
stlinkv2: mem_[read|write] needs to honor AP.
2019-07-17 17:38:21 +02:00
634c07c432
adiv5: Add TSGEN.
2019-07-17 17:38:21 +02:00
82424b100b
stlinkv2: Require STLINK V3 Rev > 2 as revision 1 can not read TARGETID.
2019-07-17 17:38:21 +02:00
9b764534e6
stlinkv2: Recognize Stlink V3E
2019-07-17 17:38:21 +02:00
3388e48d92
stlinkv2: Do not loop endless when Read DP fails.
2019-07-17 17:38:21 +02:00
9ed26645d3
Add pc_stlinkv2 platform, running on host, talking to original StlinkV2/3.
...
Stlink firmware needs to be recent.
2019-07-17 17:38:01 +02:00
fd3af639b0
Clean up some includes.
...
Includes #465 , noticed by Sid Price.
2019-07-17 17:26:00 +02:00
32d2b2c4bf
jtag: Move device list to it's own file to allow reuse.
2019-07-17 17:26:00 +02:00
bd530c8951
adiv5.c: Make functions weak where high level platforms may implement different.
2019-07-17 17:26:00 +02:00
5aebef4f64
Makefile: Indicate high level SWD/JTAG implemenatation.
2019-07-17 17:26:00 +02:00
3b75cb9a5a
gdb-server: Allow multiple instance.
2019-07-17 17:26:00 +02:00
9075411c93
Move gdb_if.c for stand-alone servers to common.
2019-07-17 17:26:00 +02:00
df7458e35a
Build-Infrastructure: Allow a different target name.
2019-07-17 17:26:00 +02:00
b4c680bb15
Add STM32G4
...
Based on #488 Stephen Roe, done as #491 .
Fixes ID of STM32G03.
2019-07-17 17:24:23 +02:00
5a7ffe7a40
Fixed SAM3X8C large file flashing.
...
The datasheet specifies the EEFC_BASE(0) is at `0x400E0A00` and EEFC_BASE(1) is at `0x400E0C00` which means they're spaced 0x200 bytes apart rather than 0x400.
2019-07-17 14:37:07 +02:00
02b2fdb2ae
fix overwriting of still-needed value (refs #487 )
...
this fixes a bug that was introduced in blackmagic PR #475 which lead to
firmware crashes when connecting to a BMP more than once without a
power-cycle.
2019-06-24 16:45:18 +02:00
589d297d20
stm32l0: Fix crash when only "monitor option" was requested.
...
PR #485
2019-06-12 12:54:29 +02:00
880613d641
lpc_common: restore RAM and registers after IAP call
...
Restore the RAM and registers which are clobbered by an LPC IAP call.
This does not restore any additional RAM which might be clobbered
by a *particular* IAP call. (For example, flash programming always
clobbers the last page of RAM.)
2019-05-30 14:01:27 -04:00
d3979a57b6
Add LPC command to read out unique ID from target.
...
This commit modifies lpc_iap_call() to work with IAP commands that
return additional data. If the "result" argument is non-null, 16
bytes of data (the maximum returned by any IAP command) are copied
to the specified address.
2019-05-30 14:01:12 -04:00
21434d6fbb
Remove redundant include file
2019-05-26 23:27:32 +02:00
600bc9f029
Generate DEBUG warnings and return if `malloc`/`calloc` fail.
...
This is will make debugging earier if this does happen, rather than
dereferencing the null pointer (or passing it to memcpy, or worse).
blackmagic PR #475
2019-05-26 18:56:12 +02:00
61e9607594
[adiv5] Improvements in ADIv5
...
* Reference latest version of the ARM specification
* ROM tables - more debug information, including printing SYSMEM bit
* MEM-AP - reject when Debug Base Address entry is not
present/invalid. These would only have errored in
adiv5_component_probe.
* Fix maximum number of entries in Class 0x1 ROM Table to 960. See ARM
IHI 0031E Table D3-1 ROM Table register summary.
* Resolve note in STM32H7 driver with explaination
blackmagic PR #474
2019-05-24 22:00:44 +02:00
703f88a969
gdb_main: Always release CPU when detaching.
...
Fixes Issue #413 and released as PR #477 .
2019-05-23 13:17:54 +02:00
24a7b8b2bf
[stm32h7] add revision command which reads the `DBGMCU_IDC` register
...
blackmagic PR #476
2019-05-21 23:20:13 +02:00
c336c300a3
[stm32h7,bugfix] Fix bug: target_add_flash called in attach
...
When `target_add_flash` or `target_add_ram` are called in an attach
function they may be added multiple times. This very much confuses
GDB. This issue has already been reported and fixed for `stm32l4` (See
Issue #455 ).
`stm32f4` and `stm32l4` are the only other cortexm drivers that
implement this pattern. These are both fine.
2019-05-21 22:38:16 +02:00
984813a29d
Add Stm32G03 from reference manual Rev.2
...
Not yet tested on a real part.
2019-04-24 12:29:58 +02:00
2108bb7137
Native Windows builds
...
All except hydrabus and launchpad-icdi building in PowerShell.
2019-04-07 10:26:45 -06:00
302ff20a6d
Merge pull request #434 from UweBonnes/nrf5
...
Nrf5
2019-03-21 19:43:29 +01:00
3235fa2005
Improve parsing of commands that require enable or disable arguments:
...
* Accept prefixes of the words 'enable' and 'disable'
* Prevent silent failures on parse errors
* Print status after flag changes
* Fix missing includes
2019-03-19 12:56:44 -07:00
691ada17e9
Implement read device info for NRF5x
2019-03-10 21:45:47 +01:00
3f89fed32e
nrf51: Use buffered direct write to flash.
2019-03-10 21:45:47 +01:00
4ecd13a9a3
nrf51: Fix crash with not argument given to "mon read".
2019-03-10 21:45:47 +01:00
db2f403417
sam4l: Remove noisy debug message.
2019-03-10 21:45:47 +01:00
a336ac2084
NRF5: New detection scheme.
2019-03-10 21:45:47 +01:00
6887628eaa
Correction of #445 attach-detach problem
...
Memory map is now completely freed and rebuilt in the separate attach
function.
It was previoulsy split beween probe and attach and never released,
causing problems when reattaching to the same target.
2019-03-03 15:55:40 +01:00
da62cbaa3d
Merge pull request #449 from jelson/width-fix
...
Use 32-bit variable for 32-bit read
2019-02-25 13:21:55 +01:00
86ed86c2a2
Use 32-bit variable for 32-bit read. (Also fixes DEBUG compile
...
error due to mismatch of format and argument.)
2019-02-24 17:49:30 -08:00
56fb0f7766
Handle STM32F730 and STM32H750.
...
Flash sector calculation was wrong with small flash sizes.
2019-02-21 19:19:10 +01:00
3f8c40d3f5
Fixing stm32l4 target to allow probing w/o halting
2019-02-21 18:06:38 +01:00
8de1b45c85
Kinetis KE04: Flash and debug support
...
Support for Kinetis KE04 8KiB, 64KiB and 128KiB variants in nxpke04.c
Target monitor commands for sector and mass erase.
Changes to kinetis.c MDM-AP target to support KE04.
Only KE04Z8 tested in HW.
2019-02-17 22:48:23 +01:00
02c1934c03
Added ability to lock and unlock boot rom for samd controllers
2019-02-13 16:33:07 -08:00
a6b75bb4ef
Makefile: Add -Wnocast-function-type for compilation on gcc8.
...
Older GCC versions do not warn for disabled warnings they do not know yet.
This is needed to compile with gcc8.
2019-01-16 23:17:17 +01:00
0b28232f72
[efm32] Assume Device Identification (DI) version 1 if we don't know the OUI ( #402 )
...
* [efm32] Assume Device Identification (DI) version 1 if we don't know the OUI
Silabs are using some additional OUIs we don't know about. Reported in issue #389
These should use a DI version 1 layout, so assume version 1 layout for OUIs we don't
know. However do print a notice about this on DEBUG() as suggested by @UweBonnes
The IDCODE value is sufficient to make a positive identification of an EFM32 device.
See AN0062 Section 2.2. Therefore accepting any OUI is reasonable behaviour.
Additionally the part familiy is checked, and the target rejected if not in the
`efm32_devices` table. This commit makes that rejection explicit, although it does
not change the logical behaviour here.
Note that the important registers (part number, part family, flash size) are at the
same addresses in both layouts anyhow. Currently only `efm32_cmd_serial` and
`efm32_cmd_efm_info` functions use registers that differ between DI versions.
* [efm32] tidy format warning about portability UB
* [efm32] Simplify OUI checking
* Only read the OUI once
* Accept the device even if the OU is unknown, as silabs have been using
a variety of OUIs
* Perform fewer register reads before checking the device family is valid
2019-01-16 09:58:59 +13:00
7cc02867ae
stm32f4: Fix problems with small flash sizes creating overflow or empty regions.
...
Thanks to "DerMeisteRR" for pointing out.
2019-01-09 12:23:49 +01:00
47fad2bf7f
Add Stm32L41x.
2019-01-09 12:23:49 +01:00
f0c6e2bbd2
Add STM32G07x.
2019-01-09 12:23:49 +01:00
0793dac2cf
libftdi: Allow to compile with mingw and cygwin and use recent libftdi1.
...
Tested with x86_64-w64-mingw32-gcc-8.2.0 and cygwin gcc (GCC) 7.3.0.
Use libftdi1 unconditionally.
Try to convice github travis to use libftdi1.
Remove unportable "uint ". Thanks to jacereda for pointing out in #400 .
2019-01-07 15:31:57 +01:00
3f0c9ccee1
Fix support for LPC1115 and LPC1115XL devices ( #415 )
...
* Add support for LPC11U3X devices.
The DeviceID register has a different address from the LPC11XX devices.
But it is shared with the LPC8XX family.
* Fix support for LPC1115 and LPC1115XL devices
* Fix whitespace
2019-01-07 13:34:00 +13:00
02b9d5f1ac
Add delay to cortexm_reset
2019-01-07 13:32:17 +13:00
d7e2923990
Debug on stm32f1_flash_erase errors
2019-01-07 13:32:17 +13:00
6df793dbf0
Revert "Allow to specificy if SRST is asserted and when it is released."
...
This reverts commit 44fc24e0e7
2019-01-07 13:22:01 +13:00
9ce05ae67b
stm32h7/f7: Store DBGMCU_CR on attach() and restore on detach().
...
On STM32[FH]7, DBG_SLEEP must be set for debugging.
2019-01-07 13:22:01 +13:00
8d6092b73f
cortexm_forced_halt: Only release SRST after "Halt on reset" command.
...
This should make life easier if program remaps JTAG/SWD pins so that
with program running, JTAG/SWD access is impossible.
2019-01-07 13:22:01 +13:00
3ebf049424
cortexm: Only force halt before probe if idcode is unknown and ROM TABLE unreadable.
2019-01-07 13:22:01 +13:00
6633f74d95
stm32h7/f7: Write DBGMCU_CR only on attach.
...
Split probe/attach for STM32H7.
2019-01-07 13:22:01 +13:00
8575d3e7a6
stm32f7/h7: Use the DPv2 provided idcode for MCU identification.
2019-01-07 13:22:01 +13:00
525b90d4e5
cortexm: Only force halt before probe() if probe was forced.
2019-01-07 13:22:01 +13:00
da75acf015
adiv5: Only force cortexm_probe() once.
2019-01-07 13:22:01 +13:00
489f24584b
adiv5: Read TARGETID on DPv2 devices.
2019-01-07 13:22:01 +13:00
cde7726b87
cortexm: detach still needs extra cycles.
2019-01-07 13:22:01 +13:00
14bedcc441
Add support for LPC11U3X devices.
...
The DeviceID register has a different address from the LPC11XX devices.
But it is shared with the LPC8XX family.
2018-10-04 08:53:05 -07:00
771d81a5f0
Fix link for windows_dfu_util
2018-10-03 15:20:09 -07:00
d8b01ff61f
swlink: Enable UART2 for SWO.
...
Stlink on STM8S-Disco needs additional wiring for SWO.
2018-10-03 15:19:33 -07:00
7cafc44bd9
swlink: Allow to enable debug on second VCOM.
2018-10-03 15:19:33 -07:00
0d246fb31a
swlink: Measure voltage on VDD pin of Stlink/Stm8s.
2018-10-03 15:19:33 -07:00
184ef991bf
swlink: Handle LED.
2018-10-03 15:19:33 -07:00
06272e0a59
swlink: Implement dfu_upgrade.
2018-10-03 15:19:33 -07:00
530d1e5c28
swlink: Handle force boot on bluepill.
2018-10-03 15:19:33 -07:00
b744d8b0c9
swlink: Implement NRST.
2018-10-03 15:19:33 -07:00
1263d185a6
swlink: Distinguish between Stlink on STM8-Disco and "blue pill".
2018-10-03 15:19:33 -07:00
91dd879dac
Another nRF52 ID.
2018-09-13 16:18:29 -06:00
3a598a0cf3
Merge pull request #384 from rikvdh/feature/readable-reset-stlink
...
Change the ST-Link SRST reset function
2018-09-07 08:13:48 +12:00
f5cf6d4497
adiv5_swdp: Add extra idle cycles with write transactions.
...
These extra cycles are needed by some CPU, e.g. STM32L0x1 to cross the SWCLK
/HCLK domains. Revert insufficient #373 also tackling that problem.
Thanks to Thorsten von Eicken for pointing out.
2018-09-06 17:29:20 +02:00
95053b3b4e
Change the ST-Link SRST function to use libopencm3 helper functions and fix waiting for the pin-state, change init to use the SRST function for reset de-assertion
2018-09-05 20:28:02 +02:00
f39701c4c8
Move the LPC17xx probe function down since it performs an IAP call which can hang when performed on other devices than a LPC17xx
2018-09-05 17:40:02 +02:00
c5c0783337
Merge pull request #378 from markrages/nordic_unlock
...
Add extra port for mass erasing / unprotecting nRF52 with APPROTECT set.
2018-07-28 14:56:03 +12:00
d0a8ce0819
Add extra port for mass erasing / unprotecting nRF52 with APPROTECT set.
...
Mostly copied from the equivalent in kinetis.c and
https://devzone.nordicsemi.com/f/nordic-q-a/12484/approtect-and-dap/47301
2018-07-27 16:07:19 -06:00
6fd3ede5c7
Merge pull request #377 from markrages/add_id_2
...
Another chip ID for Nordic nRF52832.
2018-07-28 09:53:00 +12:00
cb8596b0b2
Another chip ID for Nordic nRF52832.
2018-07-27 15:09:14 -06:00
5918608156
STM32F7: Debug does not work with WFI without DBG_SLEEP
2018-07-27 10:59:54 +02:00
2c1c913213
adiv5.c: Add units found on M7.
2018-07-27 10:59:54 +02:00
f234074099
stm32h7: Start of support.
...
Implement probe, memory map, erase, write, uid, crc, parallelism.
2018-07-27 10:59:54 +02:00
a988bba035
Merge pull request #372 from richardeoin/efm32-1
...
[efm32] Add support for EFM32 devices with different DI and MSC layouts
2018-07-27 11:41:58 +12:00
d7b173ab39
Merge pull request #310 from UweBonnes/stm32l4r
...
arget/stm32l4.c: Add stm32l4r series and clean up.
2018-07-27 10:32:00 +12:00
b4dc666aca
Add nRF52 QIAA C0
2018-07-26 23:13:38 +01:00
4a312c7697
target/stm32l4.c: Add stm32l4r series and clean up.
2018-07-22 15:44:00 +02:00
7034d0bb94
stm32l4: Option byte loader must be started with flash unlocked!
...
Warn user that device will loose connection.
2018-07-22 15:44:00 +02:00
83f9655f6e
stm32l4: Fix wrong default for WRP2A option halfword.
2018-07-22 15:44:00 +02:00
139707c5c0
cortexm/detach: Add a dummy transaction after cleaning DHCSR.
...
This replaces the seemingly superflous swdptap_seq_out() at
the end of adiv5_swdp_low_access() needed to continue after detach.
2018-07-19 10:57:41 +02:00
a7106bd346
[efm32] Add support for flashing User Data (UD) and Bootloader (BL) regions
...
* UD region on all devices, some devices also have BL region
* Fix page size for EZR32HG
2018-07-18 08:57:01 +00:00
55bb96cfdb
[efm32] tidy compiler warning
2018-07-16 20:47:24 +00:00
98faaceb70
[efm32] Add support for EFM32 devices with different DI and MSC layouts
...
* DI layout is identified by attempting to read OUI from both layouts
* MSC address is passed to flashstub in r3
Retested EZR32LG230 (EZR Leopard Gecko M3)
Tested EFR32BG13P532F512GM32 (EFR Blue Gecko)
Achieves aims of PR #264 (I think) Thanks to @dholth and @ryankurte for inspiration
Fixes Issue #226
2018-07-16 20:18:36 +00:00
59d6eca8f0
Fixes option erase for STM32F070x6 STM32F070xB STM32F030xC
2018-07-10 18:44:05 +03:00
c5713ea8d3
Merge pull request #366 from UweBonnes/f7_fix
...
stm32f4.c: F76x also has large sector by default.
2018-07-07 13:03:14 +12:00
1b51c4961e
Merge pull request #363 from korken89/master
...
Removed debug bits for F4/F7 target, same as all other MCUs now
2018-07-07 13:01:05 +12:00
50514ccc31
stm32f4.c: F76x also has large sector by default.
2018-07-05 13:29:43 +02:00
5e8c8cae10
Removed debug bits for F4/F7 target, same as all other MCUs now
2018-06-28 16:31:34 +02:00
7a7266a0f7
Speed up JTAG.
2018-06-26 19:50:14 +02:00
59e03dea27
Keep TMS floating until scanning.
...
NRF5x shares nRST with SWDIO and otherwise does not run until scan is done.
2018-06-26 19:50:14 +02:00
97561fc5cc
stlink: Decrease delay with SWD turn around for native,stlink and swlink.
2018-06-26 19:50:14 +02:00
5548d54626
common/swdptap: some clean up.
...
Remove superfluous transaction.
Use native variable size.
2018-06-26 19:50:14 +02:00
7e3fe352ad
adiv5_swdp.c: Use swdptap_seq_out for initialiation sequence.
2018-06-26 19:50:14 +02:00
e54a826745
common/swdptap.c: Speed up by "unrolling" swd.._seq_...() for GPIO.
...
Try to have sensible setup/hold times by evenntually duplicated or
logically useless port commands.
Loading code to RAM on a STM32L476 got up from 46 to 83 kB/sec.
2018-06-26 19:50:14 +02:00
633af5bb85
libftdi/jtagtap.c: Fix error introduced with commit de33473
...
Seen when scanning e.g. Zync with mon jtag 6 4.
2018-06-26 17:43:06 +02:00
b2defad844
Merge pull request #356 from UweBonnes/probe_halted
...
Probe halted
2018-06-21 10:06:56 -07:00
b59bbac0b2
stm32l4: Use buffered direct write to flash.
2018-06-16 13:30:53 +02:00
891d6de8eb
stm32f1.c: Use buffered direct write to flash with half word access.
2018-06-16 13:30:53 +02:00
f1752c7a1a
stm32f4: Allow DWORD parallelism.
...
Needs external VPP!
2018-06-16 13:30:53 +02:00
15312eb86c
stm32f4: Honor parallelism also for erase.
2018-06-16 13:30:53 +02:00
bfeb6f0db9
stm32f4: Use buffered direct flash write with choosen size.
2018-06-16 13:30:53 +02:00
54f73858f9
Provide a target function to write with given size.
2018-06-16 13:30:08 +02:00
17b817f37b
cortexm: Allow to set timeout to wait for halt.
...
This allows to gain access to devices spending long time in WFI without
the need for a reset, at the expense of possible long waiting times.
Using Reset means loosing the device runtime context.
2018-06-13 14:03:50 +02:00
9e365a58f7
Cortex-M: Try harder to halt devices in WFI.
...
E.g. STM32F7 and L0 need multiple C_DEBUG and C_HALT commands to halt
the device.
2018-06-13 14:02:43 +02:00
44fc24e0e7
Allow to specificy if SRST is asserted and when it is released.
...
E.g. for STM32L0 and F7, IDCODE register can not be read while device is
under Reset.
2018-06-13 13:46:07 +02:00
66e357d517
Cortex-M: Probe Cortex-M even if ROM table read fails.
...
Rom table in some devices (e.g. STM32L0/F7) can not be read while
device is in WFI. The Cortex-M SWD signature is however available.
If we know by that signature, that we have a Cortex-M, force a
probe for Cortex-M devices.
2018-06-13 13:04:17 +02:00
ae6f0eadc9
Support for MSP432 TI MCUs ( #353 )
...
Introduces flashing and debugging support for Texas Instruments MSP432
series of MCUs
2018-06-07 08:34:21 +12:00
077e455a94
Setting the driver string on scan.
...
This way swdp_scan and jtag_scan commands will show the chip that was
detected instead of the generic STM32F4 string. The generic name is
most confusing when attaching to an STM32F7 target.
2018-06-01 12:46:14 -07:00
2657aa6fbb
libftdi: Allow more flexible Swd Read/Write Switching.
2018-05-30 19:21:03 +02:00
df05d7ce7b
libftdi: Allow device specific port/pin to read SWD bitbanged.
...
Gracefully abort swd scan if devices can not do SWD.
Best effort to indicated SWD capability on existing cables and
add descriptions for the cables.
2018-05-30 19:21:03 +02:00
fce25b9fd5
libftdi/swdptap.c: Substantial speed increase for bitbanging SWD.
...
Provide the swd sequences unrolled.
2018-05-30 19:21:03 +02:00
992ccf91a9
libftdi/swdptap.c: Use MPSSE Mode for bitbanging SWD.
2018-05-30 19:21:03 +02:00
f3cacba219
libftdi: Flush buffer with detach.
2018-05-30 19:21:03 +02:00
2ec078cfcf
libftdi/jtagtap.c: Allow NULL as one DI/DO argument jtagtap_tdi_tdo_seq.
...
Implement jtagtap_tdi_seq() by calling jtagtap_tdi_tdo_seq().
2018-05-30 19:21:03 +02:00
de33473535
libftdi/jtagtap: Copy DI direct into the write buffer.
2018-05-30 19:21:03 +02:00
aa938c6dae
libftdi/jtagtap: Try harder to initialize Ftdi MPSSE jtag mode.
...
After "mon s" at least the second "mon j" now succeeds again.
2018-05-30 19:21:03 +02:00
c548e307fe
libftdi/jtagtap: Clean up code.
2018-05-30 19:21:03 +02:00
7d45bd4869
ibftdi/jtagtap: Remove magic numbers.
2018-05-30 19:21:03 +02:00
6f0a46d9c1
libftdi: Export active cable description.
2018-05-30 19:21:03 +02:00
68c7180376
libftdi: Add ftdiswd variant.
2018-05-30 19:21:03 +02:00
f4bc6f9ddd
libftdi/platform.c: Issue SEND_IMMEDIATE before reading.
2018-05-30 19:21:03 +02:00
744deb678d
libftdi/platform.c: Only set bit direction with MPSSE SET_BIT_XXXX.
2018-05-30 19:21:03 +02:00
48d232807e
Merge pull request #337 from adamgreig/stm32f4-ram-size
...
Update maximum RAM sizes for F4 and F7 devices
2018-04-26 13:38:11 +12:00
e1cefb2031
Update maximum RAM sizes for F4 and F7 devices
2018-04-24 11:06:07 +01:00
93f3b14b68
stm32f1(f0): Do not read normal device registers during probe.
...
Device may not be halted and memory map setup may fail.
2018-04-23 11:06:08 +12:00
a0596a0dcc
stm32l4: Build Memory Map during attach.
...
Reading target registers while target not halted may fail and result in
invalid memory map.
2018-04-23 11:06:08 +12:00
5f404cdbc0
Construct memory map on the stack
...
The memory map uses 1k of SRAM and is only needed during attach. Release
after use lowers pressure on SRAM.
2018-04-23 10:51:04 +12:00
6127a6431e
stlink: Check nRST line level when setting SRST.
...
Problem: On some boards flashing hanged.
Cause: Releasing SRST caused a slow rise of nRST and flashing
started while the target still was in reset.
Attention: platform_delay(ms) only resolved 0.1 s.
Nucleo-P boards have SRST unconnected to target nRST by default.
2018-04-23 10:48:05 +12:00
63967346cd
stm32f4: Don't duplicate resources on reattach.
2018-04-23 10:48:05 +12:00
00decb3718
target: Separate function to free memory map.
2018-04-23 10:48:05 +12:00
1fd2a24c2d
stm32f4: Only construct memory map at attach.
2018-04-23 10:48:05 +12:00
72c1498ae1
stlink: Make SWO Trace Buffer smaller.
...
Changes for delayed memory map setup otherwise overflow SRAM silently.
2018-04-23 10:48:05 +12:00
9d7925792f
Merge branch 'master' into always_buffer_flash
2018-04-23 10:40:20 +12:00
28bd4fc0ce
Merge pull request #305 from UweBonnes/swo_async
...
Use async SWO from the bluepill pull request.
2018-04-09 08:27:49 +12:00
fa62403ee3
nrf51: Add nRF51802 device id. ( #331 )
2018-04-03 10:45:56 +12:00
fc25a3339a
traceswoasync: Implement async swo for stm32.
...
Use for stlink.
Uses dma with large buffer.
Pull up swo to provide idle level on unconnected swo pin.
2018-03-27 13:40:49 +02:00
93bc3a155a
traceswo: Provide command option for async swo.
2018-03-27 13:40:49 +02:00
3e3e450408
cdcacm.c: Use less buffer for the usb_uart buffers and reallocate.
...
With 128 bytes for both usb_uart buffers, traceswo gives errors!
Keep the size for the receive buffer and diminisch the transmit buffer,
as there is no flow control to the device.
Probably related to https://github.com/libopencm3/libopencm3/issues/477
2018-03-27 13:40:49 +02:00
cfaa5ea963
Merge branch 'korken89-master'
2018-03-27 13:01:06 +13:00
76bfb4929d
Use lowercase register names.
2018-03-27 13:00:39 +13:00
a3f855ce5c
Merge branch 'master' of https://github.com/konsgn/blackmagic into konsgn-master
2018-03-27 08:03:03 +13:00
31965a5bbc
Added support for k64 ( #301 )
2018-03-25 14:43:33 -07:00
471ce2547c
Added LPC17xx support ( #317 )
2018-03-25 12:53:30 -07:00
a41d8cb97a
Another nRF52 device id. ( #315 )
2018-03-25 12:37:51 -07:00
1ee6d4503e
Update to split 'special' into its sane parts (update from @mubes)
2018-03-24 16:44:59 +01:00
04fbabb299
mkl27 support
2018-01-21 23:43:01 -05:00
1fe870b8df
added MKL27<128kB support
2018-01-16 13:23:36 -05:00
f5cac4c78d
platforms/stm32: Ignore noise errors on USBUART
2018-01-13 21:11:17 +01:00
922f857de7
stm32f1.c: Add missing fall through statement needed by GCC7.
2017-12-18 13:56:59 +01:00
1f3c235205
src/target/stm32f1.c: Add CCM Ram of STM32F303 devices.
2017-12-08 13:39:24 +01:00
048e8447a5
target: Only support buffered flash writes
2017-10-13 08:58:37 +13:00
c53a12bfd1
cortexm: Better cache support for Cortex-M7
...
- On probe, read CTR for cache presence and minimum line length
- Make D-Cache clean a function
- Clean before memory reads
- Clean and invalidate before memory writes
- Flush all I-Cache before resume
2017-10-12 09:26:01 +13:00
0e5b3ab00e
Make Cortex M driver write DCCIMVAC (Data cache clean and invalidate by address to the PoC=Point of Coherency) prior to reading or writing each 32 bytes of RAM
2017-10-12 08:41:58 +13:00
9a5b31c37b
Fix fallthrough warnings on gcc 7
2017-10-09 11:07:29 +13:00
120a2d9378
target: Fix calculation of erase size.
2017-10-05 22:11:01 +02:00
a7815fff3d
target.c: No need to split write while still in same flash block.
2017-10-04 21:52:29 +02:00
25610e5ec5
target: Fix unconsistant use of tmplen.
2017-10-04 21:52:29 +02:00
f27f3bad5c
libftdi: Fix tdi_tdo_seq result unpacking
2017-10-05 08:26:33 +13:00
2db42ba8e5
Merge pull request #287 from gsmcmullin/update_libopencm3
...
Update libopencm3
2017-10-04 10:58:44 +13:00
0aa47113f3
stm32f4: Fix F4 dual bank OPTCR1 to option byte mapping.
2017-10-02 16:22:14 +02:00
c4d3712b39
stm32f4.c: Rework flash structure recognition.
...
Dual bank devices do not have sectors (8)12..15 !
Dual banks devices need to MER1 set for mass erase.
F72x has different FLASHSIZE_BASE
2017-10-02 16:22:14 +02:00
0ed66547d5
Fix libopencm3 breakage
2017-09-25 11:17:03 +13:00
4966168802
s[t|w]link: Implement ENABLE_DEBUG.
2017-09-23 16:40:28 +02:00
ce1ef6e41b
stm32: Move rdi handling to common stm32 code.
2017-09-23 16:39:35 +02:00
203f6702d8
Flashsize_F103: Options for BMP on STM32F103C8 devices
2017-09-21 23:05:20 +02:00
963df9febc
stlink: Use common initialization and detect V2.1 boards.
...
Factor out hardware revision detection, USB detach and power settings, as
all three program (bootloader, bmp and dfu-upgrade) need it.
2017-09-21 18:43:06 +02:00
259f1b90df
cortexa: Check for fault on set/clear soft breakpoint.
2017-09-20 11:16:36 +12:00
1cb4271749
cortexa: Remove problematic code for AHB access.
...
The old code for 'fast' memory accesses using the AHB directly
has problems with data consitency. Until this can be resolved, I'm
removing the affected code.
2017-09-19 09:13:22 +12:00
2df0c7d6a7
Merge pull request #261 from cpavlina/tm4c
...
lm3s/tm4c: add TM4C1230C3PM
2017-09-06 15:34:42 +12:00
46e363393f
Add nRF52840 support (PCA10056, nrf52840 PDK)
2017-09-03 23:05:29 +00:00
37f9623de2
Added NRF51_FICR_CONFIGID for nRF51822 QFAA H2
2017-08-30 17:14:52 +02:00
37bb86267a
STM32F0: Several STM32F0[3|7]0 have same ID as other STM32F0X0.
2017-08-28 22:58:59 +02:00
a0b0b8a716
lm3s/tm4c: add TM4C1230C3PM
2017-07-21 13:29:41 -06:00
7663794fdf
Merge pull request #247 from schodet/stm32f4-x8-x32
...
Allow programming STM32F4 when using a low voltage
2017-07-09 14:33:06 -07:00
3846ea4708
stm32f4: allow selection of flash programming parallelism
2017-07-09 23:26:49 +02:00
09f49b469d
Merge pull request #256 from nar0909/patch-1
...
New Device Id update - QFAA G1
2017-07-09 13:45:52 -07:00
43ac4a04f7
New Device Id update - QFAA G1
...
New device Id - for NRF51822 QFAA G1 1529AM.
2017-07-04 12:32:39 +10:00
f036be8cb2
Identify and support LPC1112/102 MCU as well
...
Signed-off-by: Daniel Egger <daniel@eggers-club.de>
2017-06-23 21:52:13 +02:00
984f8b3d94
Merge pull request #248 from schodet/typo
...
stm32f4: fix typo in target name
2017-06-22 18:35:29 -07:00
40ac8e1004
Merge pull request #241 from gsmcmullin/no_magic_vtor
...
Use vector_table symbol for assignment of SCB_VTOR.
2017-06-22 16:31:09 -07:00
02ce5e23b6
stm32f4: fix typo in target name
2017-06-19 10:56:20 +02:00
680aa30d52
stm32f4: add support for STM32F4[67]9
2017-06-19 10:41:38 +02:00
1ee1f441d5
stm32f4: write flash using byte access
2017-06-16 14:45:16 +02:00
408c5a9df2
stm32f4: Try to handle option bytes for more devices.
...
Correct the table for the OPTCRx values from errors in documentation and
error when entering the values.
2017-06-09 13:03:26 +02:00
8a7455f63e
src/target/stm32f4.c: Add STM32F7[2|3]x.
2017-06-09 13:03:26 +02:00
84e036a804
target/stm32f4: Document FLASH_OPTCR(1|2) registers.
2017-06-09 13:03:26 +02:00
2216587b39
src/target/stm32f4.c: Remove missleading DTCM comment.
...
Use different command string for F74x and F76x.
2017-06-09 13:03:26 +02:00
dc1c7611a9
src/target/stm32f4.c: All STM32F7 devs have option bytes at 0x1fff0000.
2017-06-09 13:03:26 +02:00
e43017d0a6
src/target/stm32f4.c: Add STM32F412 and F413.
...
F413 needs its own clause, as there is memory > 1 MB but no second bank.
2017-06-09 13:03:26 +02:00
24ed65d6b6
src/target/stm32f4.c: Declare CCMRAM only for devices with CCMRAM.
2017-06-09 13:03:26 +02:00
2eb2f8edd7
Use vector_table symbol for assignment of SCB_VTOR.
2017-06-09 13:07:06 +12:00
a7771fa23f
stlink/swlink: Remove missleading comments.
2017-06-08 18:25:43 +02:00
aaa7b0e38e
Merge pull request #217 from UweBonnes/stm32l4
...
Stm32l4
2017-05-23 12:22:04 -07:00
fd467269eb
Merge pull request #233 from gsmcmullin/parallel_make_fix
...
Fix parallel build.
2017-05-23 12:20:21 -07:00
539d9e14ec
Merge pull request #223 from gsmcmullin/nrf51_c_stub
...
nrf51: Replace stub with C version and pass params in registers
2017-05-23 12:00:08 -07:00
ecc0d9807d
Fix parallel build.
...
Add explicit dependency of command.c on version.h
Remove version.h on make clean.
2017-05-23 11:57:35 -07:00
91839f3aee
stm32l4.c: Handle options.
2017-05-11 23:31:43 +02:00
289be4d9db
stm32l4.c: Add STM32L43/L44/L45/L46/L49/L4A.
2017-05-11 23:31:43 +02:00
8cc2c44dbf
f4discovery: Use Magic constant in RAM for Bootloader entry.
2017-05-11 22:21:38 +02:00
a0e47c392b
f4_discovery: Clean up platform.h and Readme.
2017-05-11 21:53:01 +02:00
814eb0e3a2
f4discovery: Make DFU work (again?)
2017-05-11 21:52:24 +02:00
f5dd3006fb
STM32: Generate same serial number as internal DFU bootloader.
2017-05-11 21:52:24 +02:00
b7235da97f
dfucore.c: Announce no writable bootloader pages when device is read proteced
...
or bootloader is write protected.
Device read protection or write protection on first 4 bootloader pages
can only be removed by mass erase. Triggering mass erase with a program
running from flash is doomed for failure.
User can force bootloader update, at their own risk to brick the device.
2017-05-07 13:19:37 +02:00
b09a522f37
STM32F103: Use flash size from device for DFU string.
...
Complements #204 .
STLinkV2-1 has F103CB on board! F103C8 on older Stlinks can use upper flash
with hopefully acceptable error rate.
For F103C8 devices, user has to give the force option to dfu-utils.
2017-05-07 13:19:37 +02:00
94c822cb62
nrf51: Replace stub with C version and pass params in registers
2017-05-03 13:10:01 -07:00
6b592b4118
Merge pull request #218 from stoyan-shopov/breakpoint-removal-bugfix
...
fixed a bug in the breakpoint removal code
2017-05-03 12:11:50 -07:00
5af76a1b74
dfu_f1/dfu_upgrade: Do not set read protection.
...
As the first 4 pages of the bootloader will always keep write protection
once read protection is applied, with the second update of the bootloader
only the higher pages where updated effectivly.
In most cases this resulted in an inaccessible device!
2017-04-29 14:58:41 +02:00
01e3582525
fixed a bug in the breakpoint removal code
2017-04-28 13:22:59 +03:00
b10971b19b
Merge pull request #206 from UweBonnes/dfu-upload
...
Dfu upload
2017-04-27 10:07:37 -07:00
3c06396c8e
Constify strings and constant structs
2017-04-22 13:50:04 -07:00
633662dbb3
Hold TMS high during reset.
...
This is a questionable fix for the Kinetis K22F that samples
this pin on release from reset to enable its EzPort which
makes the flash unusable and disables the rest of the micro.
2017-04-21 11:05:07 +12:00
1140ff957e
kinetis: Check/fix security byte on flash done.
2017-04-19 13:55:37 +12:00
06bf37fe20
Merge pull request #208 from gsmcmullin/mem_packet_range_check
...
Add range checking on mem access packets.
2017-04-18 14:17:07 +12:00
08c0cafa09
stm32f4: Translate ITCM addresses to AXIM on flash write.
2017-04-18 12:56:33 +12:00
bd2cfe72f0
Add range checking on mem access packets.
2017-04-18 11:41:11 +12:00
e5395aaba7
Merge pull request #91 from schodet/usb-vbus
...
Fix usage of USB_VBUS
2017-04-18 08:22:57 +12:00
d796571438
Implement DFU_UPLOAD.
2017-04-15 14:26:03 +02:00
1d8ebcd75f
Handle SET_ADDRESS according to DFUSE specs.
2017-04-14 15:16:59 +02:00
1f31099d46
Merge pull request #202 from gsmcmullin/tiva_srst_inhibit
...
lmi: Inhibit SRST on Tiva and add some fault checks.
2017-04-13 09:13:55 +12:00
dacf907540
Merge pull request #204 from gsmcmullin/stlink-flash-size
...
Increase st-link flash allowance to 128K.
2017-04-13 09:08:55 +12:00
394fd4894b
Increase st-link flash allowance to 128K.
...
Although the devices are only documented to have 64K flash,
they have been obeserved to have a full 128K, although the undocumented
half may be untested and have problems.
2017-04-13 09:01:26 +12:00
644add19a6
lmi: Add comment explaining SRST inhibit
2017-04-13 08:42:16 +12:00
00183f1a9b
lmi: Inhibit SRST on Tiva and add some fault checks.
2017-04-12 15:52:09 +12:00
e4de689a09
cortexm: Check halt reason on stub exit.
2017-04-12 11:37:42 +12:00
8e2c2757b4
Merge pull request #195 from gsmcmullin/kinetis_work
...
Kinetis stuff
2017-03-28 13:58:00 +13:00
3d2fa6d233
target: Add new targets to end of list.
...
This shows targets enumerated in their natural order,
rather than in reverse.
2017-03-27 14:59:54 +13:00
0ed793fe24
kinetis: Clobber security byte with unsecure value.
...
May be overridden with `mon unsafe enable`.
2017-03-27 14:01:35 +13:00
7de304d72a
kinetis: Add recovery mode target.
2017-03-27 10:51:36 +13:00
bb93af50c3
adiv5: Debug log on failure to read ROM table.
2017-03-27 09:05:37 +13:00
21f71fd18a
More STM32L4 devices
...
Hello,
appended patch adds more STM32L4xx devices and was tested with L432 Nucleo.
Cheers
--
Uwe Bonnes bon@elektron.ikp.physik.tu-darmstadt.de
Institut fuer Kernphysik Schlossgartenstrasse 9 64289 Darmstadt
--------- Tel. 06151 1623569 ------- Fax. 06151 1623305 ---------
>From e9323a35b667659111226686221a037375a6c208 Mon Sep 17 00:00:00 2001
From: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de>
Date: Thu, 2 Feb 2017 20:12:59 +0100
Subject: src/target/stm32l4.c: Add more devices.
2017-02-07 09:42:30 +13:00
41fb2a3104
More STM32L0 devices
...
Hello,
appended patch adds more STM32L0xx devices and was tested with L031 Nucleo.
Cheers
--
Uwe Bonnes bon@elektron.ikp.physik.tu-darmstadt.de
Institut fuer Kernphysik Schlossgartenstrasse 9 64289 Darmstadt
--------- Tel. 06151 1623569 ------- Fax. 06151 1623305 ---------
>From fb014dd8a90691056f10fbeffd7f21aaad196662 Mon Sep 17 00:00:00 2001
From: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de>
Date: Fri, 27 Jan 2017 23:09:10 +0100
Subject: src/target/stm32l0.c: Add new categories.
2017-02-07 09:42:30 +13:00
62dedb9824
Add K22F
2017-02-07 09:36:47 +13:00
7ba2987a83
native: Fix macros for setting pin mode.
...
Fixes #184
2017-01-24 10:49:45 +13:00
8c256d9e59
kinetis: Add KL03 devices.
2017-01-17 15:28:47 +13:00
a77fb9ac1b
Merge pull request #180 from paramaggarwal/patch-1
...
Actual pin mappings and the comment differ!
2017-01-09 14:39:06 +13:00
334f6dac0a
Merge pull request #182 from esden/bmpm21
...
Add BMPM V2.1 support
2017-01-09 14:38:33 +13:00
cd1bef89bb
adiv5_dp_init: make ctrlstat volatile to supress warning.
2017-01-09 09:13:19 +13:00
606b73601c
Added TMS/SWDIO direction pin & adjusted SRST sense.
...
1) This version uses a direction control level shifters. We need to control
the direction of the TMS/SWDIO pin.
2.1) Because we want to support a large voltage range for SRST we use an
external dual MOSFET for asserting and sensing the SRST line. We have
added the hardware version 3 to be handled the same way as version 0.
Meaning using separate pins for assertion and sensing of the SRST line.
2.2) The new SRST sense circuit is inverting, thus we have dedicated
code for hardware version 3 that inverts the SRST status pin on read.
2017-01-06 18:31:55 -08:00
51ac0fe319
Actual pin mappings and the comment differ!
...
I was stuck trying to debug the issue why my probe would not find any attached targets. This is because I was doing the pin mapping as per the comments, and not the actual code. There is a mismatch!
This PR updates the comment to reflect the values set in code. :)
2017-01-01 14:50:58 +05:30
085c980215
Remove EXTENDED_RESET define
2016-12-04 13:51:27 -08:00
a3c2592e44
Review feedback
2016-12-04 13:15:45 -08:00
469ecbf0f9
SAM4L: Add target driver for SAM4L
...
This commit adds a target driver for SAM4L and it depends on the
extended reset change.
2016-12-02 00:10:06 -08:00
0aef6c6774
SAM4L: Add extended reset to target interface
...
This adds a new function to the internal target interface
to allow the target to get control before reset is complete
so that it can do any additional work. On this target there
is a proprietary internal bit that has to be reset in some
cases to allow the core to continue operating.
2016-12-02 00:08:21 -08:00
b745799156
Merge pull request #171 from gsmcmullin/v2_usb_uart_check
...
Don't enable usb uart on v2 when debugging
2016-11-22 13:20:24 +13:00
7730d3b198
Don't enable usb uart on v2 when debugging
2016-11-22 12:45:59 +13:00
15268ac663
EFM32HP (happy gecko) support
2016-11-16 08:23:40 +13:00
4212d7a394
add STM32F303 targets
2016-11-03 13:44:13 -07:00
e279844532
Merge pull request #167 from gsmcmullin/stm32l4_buffered
...
STM32L4: Use buffered flash model.
2016-10-31 12:06:00 -07:00
bcf3caf20e
cortexa: Disable AHB memory access to avoid issues with L2 cache.
2016-10-26 18:27:35 -07:00
3b7edc325d
Merge pull request #165 from gsmcmullin/gdb_tcp_buffering
...
libftdi: Disable Nagle algorithm and buffer sends internally.
2016-10-25 10:28:29 -07:00
f40883f2b2
cortexa: Wait for instruction complete on resume, and timeout if no response.
2016-10-25 10:22:21 -07:00
f947465fe4
libftdi: Disable Nagle algorithm and buffer sends internally.
...
This significantly improves performance by not waiting for TCP
timeout on transmission.
2016-10-25 10:07:04 -07:00
917c107ded
Use `git-describe --always --dirty` when generating `version.h`
2016-10-22 14:45:32 -07:00
7c83536c14
Don't break build if no tags in history
2016-10-22 13:19:00 -07:00
7b575bd7c6
Fix Travis deployment.
2016-10-22 13:07:42 -07:00
d48465c527
Merge pull request #163 from gsmcmullin/travis_publish
...
First attempt at publishing Travis builds to Amazon S3.
2016-10-22 12:06:46 -07:00
cbc21114c1
First attempt at publishing Travis builds to Amazon S3.
2016-10-22 11:55:15 -07:00
fdeb6471a8
Added missing #include guard.
2016-10-19 14:56:52 -07:00
4348f0d135
Fixed double const.
...
The way the const pointer was written caused at least the clang compiler
to complain about double cosnst. I am not sure if the way it was written
before it resulted in the intended "make everything const" goal. But the
way it is written now it adheres to the right to left reading rule.
2016-10-19 14:37:03 -07:00
2d37de773c
Fixed #include guard.
2016-10-19 14:36:27 -07:00
8a009ca6ae
Corrected jtagtap_next signature.
...
The parameter is TDI (as in input) not TDO. The header signature and
comment are correct.
2016-10-19 13:53:04 -07:00
3b74d91c69
Add support for nRF51822QFAAH1
2016-10-16 19:52:47 +11:00
3abb4afdf6
Merge pull request #153 from gsmcmullin/restore_leds
...
Restore LED behaviour.
2016-10-05 10:37:36 -07:00
2e9660910c
STM32L4: Use buffered flash model.
2016-09-30 12:09:37 -07:00
517881f551
Merge pull request #154 from gsmcmullin/cortexa_breakpoints
...
cortexa: Fix hardware breakpoints.
2016-09-29 21:39:04 -07:00
9a8cef04e0
Clean up debug format strings.
2016-09-29 21:31:18 -07:00
966f360515
debug: Use semihosting if available or output via usbuart.
2016-09-29 21:31:13 -07:00
ba8f77abf8
cortexa: Fix hardware breakpoints.
2016-09-28 22:18:24 -07:00
40f960db4d
Restore LED behaviour.
2016-09-28 22:15:15 -07:00
45e322b9a3
Handle usart errors.
2016-08-22 09:57:52 +12:00
ca364a889e
Fix #145
...
Don't tc_printf in the probe.
tc_printf fixed to not crash of no controller connected.
2016-08-22 09:56:24 +12:00
df7ad91692
Merge pull request #146 from joshgrob/nRF51/52_update
...
Adding new ConfigID value for nRF52832 QFAA B00
2016-08-10 07:33:28 +12:00
779e0b5d15
Print sizes in memory map using 32-bit formatting for newlib-nano.
2016-08-08 13:42:03 +12:00
fd4b8a02c0
Adding new ConfigID value for nRF52832 QFAA B00
2016-08-03 23:27:34 -04:00
f131460168
Don't use zx format with printf. Doesn't work with newlib.
...
Fixes #144 .
2016-07-19 10:45:46 +12:00
9a45d89b4a
target: Remove target_check_error from external interface.
2016-07-13 08:31:09 +12:00
97f3fc6155
Reorder target.h
2016-07-13 08:31:09 +12:00
9aacc18f60
target: Restructure internal break/watch handling.
...
cortexa: Implement soft breakpoints.
2016-07-13 08:31:09 +12:00
9136cf4c98
target: target_halt_wait and target_check_hw_wp replaced with target_halt_poll.
...
The new function returns a stop reason which must be translated in gdb server.
In the case of a watchpoint hit, the address is returned by a pointer parameter.
Simplify the extenal interface for set/clear breaki-/watchpoints.
2016-07-13 08:31:09 +12:00
ab06243e93
target: Use size_t instead of unsigned in syscall interface.
2016-07-13 08:31:09 +12:00
26fab877da
target: Provide errno definitions and fallback for unimplemented syscalls.
2016-07-13 08:31:09 +12:00
82cb6c8e83
target: Use target_addr for flash routines.
2016-07-13 08:31:09 +12:00
aeaca988c3
target: Use new target_addr type consistently in external interface.
...
Flash routines still use uint32_t internally.
2016-07-13 08:31:09 +12:00
f9bdaf06a4
Move flash stubs to target directory and update readme.
2016-07-13 08:31:09 +12:00
b494279fe5
Move target files into separate directory.
2016-07-13 08:31:09 +12:00
b644724520
Overhaul of semihosting. Remove dependence of target on gdb_packet.
2016-07-13 08:31:09 +12:00
b03cc59bea
target: Add target controller structure for indirect calls back to host.
2016-07-13 08:31:09 +12:00
5832d8a42a
Clean up common SWD stuff.
2016-07-13 08:31:09 +12:00
9b8e2c3ad1
target: Replace all calls to gdb_out with new tc_printf.
2016-07-13 08:31:09 +12:00
jxltom
Raghu
Uwe Bonnes
Damien Merenne
Matthew Skolaut
David Lawrence
Francesco Valla
Aled Cuda
Fredrik Ahlberg
Valmantas Paliksa
Stoyan Shopov
Dömötör Gulyás
Thomas Bénéteau
Mark Rages
Koen De Vleeschauwer
Alexey Shvetsov
Sid Price
Vegard Storheil Eriksen
mean
Extreme kefir
zvova7890
Ondrej Mikle
Sid Price
Richard Meadows
Roland Ruckerbauer
Artur Maciuszonek
Thiadmer Riemersma
Ken Healy
Kirill Zhumarin
dpslwk
Daniel O'Connor
Dave Marples
Gareth McMullin
Brennan Ashton
Sylvain Munaut
Stephen Roe
Simon Rasmussen
David R. Piegdon
Alexander Zhang
Jeremy Elson
Boris Sorochkin
newbrain
anyn99
Carl
Ingmar Jager
Josh Robson Chase
Ingmar Jager
Benjamin Vernoux
Mark Rages
Rik van der Heijden
Mike Walters
Richard Meadows
Antti Louko
Emil Fresk
newbrain
Piotr Esden-Tempski
Adam Greig
Christopher Woodall
Akila Ravihansa Perera
Konsgn
Adam Heinrich
Nick Downing
Carl Sandström
Chris Pavlina
Nicolas Schodet
nar0909
Daniel Egger
Gordon Smith
Stefan Agner
Param Aggarwal
Chuck McManis
Angus Peart
Roger Clark
jgrob-an
