7ba110bd77
PNS: Fix dragging of segments with arcs in line
2021-04-11 10:18:57 -04:00
a30894e5a1
Allow SHAPE_LINE_CHAIN and SHAPE_ARC to be mirrored using a SEG
2021-04-11 13:27:25 +00:00
fe8fbf1d5d
Use arcs instead of line approximation for Miter shape
...
TODO:
* The resulting line chain is broken with the arcs, and
this appears to be some subsequent issue I was not able to pin down.
* The requirement of a correction factor is not clear to me
2021-04-11 13:27:25 +00:00
cc956695ae
Hit test for worksheet before adding Properties to menu.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8171
2021-04-11 14:18:35 +01:00
6072f5831b
Apply uniform spacing to orientation controls.
2021-04-11 10:33:26 +01:00
29e5882637
Fix typo (found by Coverity).
2021-04-11 10:32:15 +01:00
675444a646
Dim hole walls that don't pass through high-contrast layers.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8144
2021-04-10 22:41:38 +01:00
5c448057c8
PNS: Prevent state flicker when starting drag
2021-04-10 16:31:39 -04:00
7784d7cb12
PNS: Fix visible area restriction
...
VIEW::GetBoundary() returns the entire view area, not the visible area.
Surprisingly, we had no API for this, so I added one.
Also, changed the dragger behavior to toggle between optimizing just the
modified area and optimizing the visible area, i.e. we will now never
optimize off-screen portions of the dragged track.
2021-04-10 16:13:08 -04:00
94afdcb92a
PNS: Allow control of area-restricted drag optimization
...
CHANGED: The interactive router settings now include a switch to
enable or disable optimization of the entire dragged track,
which is now disabled by default. When enabled, the router
will reroute the entire track (from the dragged segment to
the closest pad/via in each direction) to be more optimal.
When disabled, only the area around the dragged segment
will be modified.
CHANGED: The "optimizer effort" slider is removed from the interactive
router settings dialog, as this setting did not have any
meaningful impact in most cases and was a source of confusion.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/5918
2021-04-10 15:17:39 -04:00
846e4aed42
Fix selection filter in Edit Text and Graphics dialog
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7966
Fixes https://gitlab.com/kicad/code/kicad/issues/8149
2021-04-10 15:49:23 +00:00
dc0cf3b802
Clean up a confusing API.
...
AllowDRCViolations is kept in any mode as a *setting*, but only
controls router behaviour when the mode is mark obstacles.
Fixes https://gitlab.com/kicad/code/kicad/issues/7795
2021-04-10 11:08:02 +01:00
176fcd43d8
Cleanup.
2021-04-10 10:04:02 +01:00
252fad1cc7
These grids *must* have a border on OSX to render correctly.
2021-04-10 10:04:02 +01:00
f606069bf6
Formatting.
2021-04-10 10:04:02 +01:00
43d8145304
Pcbnew: Snap to the closest point on graphic polygon border
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8164
2021-04-09 22:33:55 +00:00
58dfb6539f
Change orientation and flip sign of dimension height when rotating orthogonal dimensions.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6940
2021-04-09 22:30:18 +00:00
d2c7df155b
Don't show blind/microvia holes on layers they don't appear on.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8144
2021-04-09 17:14:53 +01:00
3450610977
Add ability to allow thermal vias to be implemented as pads.
...
This is mostly just for CADSTAR. Since we don't (yet) have general
purpose footprint attributes, this reuses the "net tie" hack.
Fixes https://gitlab.com/kicad/code/kicad/issues/8141
2021-04-09 14:02:13 +01:00
619a353c5e
Decouple 3D view dirty marking and refresh
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8154
2021-04-08 22:09:19 -04:00
7b3c7e1ef3
Fix some free/delete issues
...
Removes the C-format memory management
2021-04-08 16:58:45 -07:00
9939af3e27
Fix color handling in the stackup manager panel
...
Fixes https://gitlab.com/kicad/code/kicad/issues/5671
2021-04-09 00:56:31 +01:00
401bc53038
Move the DRC constraints page into a scrolled window
...
We seem to be getting a lot of these now, and it was
being cutoff by default - so make it a scrolled window
like the severities.
2021-04-09 00:56:31 +01:00
5490a85f97
Don't recompute the board thickness on UI update
...
The thickness only needs to be computed when the actual
values change, so computing on UI update is a waste of
resources and can cause UI lag.
Fixes https://gitlab.com/kicad/code/kicad/issues/5049
2021-04-09 00:56:31 +01:00
d64de3808f
Pcbnew: Snap to group items
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7694
2021-04-08 23:22:19 +00:00
a8b40bf683
Avoid Clipper when possible.
...
When expanding an error to the outside of a rounded corner pad we
need to trim it to the pad bounding box or else we get little ears
where the circle approximation meets the pad square. This is expensive,
and for clearance lines we don't really care whether the error is
inside or outside.
Fixes https://gitlab.com/kicad/code/kicad/issues/8157
2021-04-08 22:37:14 +01:00
5ea68c7694
Copy some bug fixes from DRC dialog across to Footprint Checker.
2021-04-08 22:37:14 +01:00
4521091cc1
Do not invalidate geometry when all we need is a repaint
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8157
2021-04-08 17:35:51 -04:00
d878cbddbc
PNS: a few forgotten cleanup items
2021-04-07 23:34:45 -04:00
c9040a5c53
PNS: fix some weirdness identified by PVS
2021-04-07 23:16:56 -04:00
e0f26fd525
Make live 3D refresh optional
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8068
2021-04-07 22:39:30 -04:00
d4957b112e
PNS: Keep last valid drag solution in the node
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/5450
2021-04-07 21:59:23 -04:00
26835f582c
Some situations require more than one dummy
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7820
2021-04-07 21:30:18 -04:00
9432484394
PNS: Find origin segment correctly when arcs are present
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8139
2021-04-07 20:28:30 -04:00
18f07024a6
Simplify UI event handling in pcbnew global edit dialogs
...
Instead of enabling/disabling the controls on every possible
UI event in these dialogs, only do it when the actual control
wants to know if it should change status.
2021-04-07 17:39:48 +01:00
1a727558b0
Switch update event handlers to use the event instead of pointers
...
It is safer to use the event to pass the enable/string
instead of pointers, since using the pointers could trigger
other UI events.
2021-04-07 17:39:48 +01:00
29cc16a4c4
Push pcbnew layer alpha change update into base frame
...
This code was shared between the footprint frame and
pcb edit frame, so push it into the base edit frame.
Also remove the dummy wxUpdateUIEvents that weren't
actually being used.
2021-04-07 17:39:48 +01:00
3fd3be9843
Layer fixes for PCBNew drawing tools.
...
1) Implement layer changes for dimension drawing tool
2) Ensure drawing layer is visible for (1) and for the text drawing
tool.
Fixes https://gitlab.com/kicad/code/kicad/issues/8106
2021-04-07 15:02:48 +01:00
e50b450092
Formatting and organisation.
2021-04-07 14:50:29 +01:00
85efdb85b0
CADSTAR PCB: Ensure continuous track routes
...
When route offsetting, add an additional thin track to ensure
end point of one track and start point of the next are at the same
location.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8131
2021-04-07 11:28:02 +00:00
211fd65c23
Move: Ignore mouse up and click events until a mouse move / drag event
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8123
2021-04-06 17:29:52 +00:00
09b2db3139
Test for group in footprint was snagging all footprint children.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8121
2021-04-06 18:27:43 +01:00
9f957d3e08
Fix crash when attempting to tune discontinuous lines
...
Also correctly find the tuning path through arcs
https://gitlab.com/kicad/code/kicad/-/issues/8131
2021-04-06 09:07:11 -04:00
235688e459
Less restrictive Arc Track Dragging tool
...
Use the connecting straight tracks even if not exactly parallel - allow
an error margin configurable in ADVANCED_CFG (default 1 degree). Also
be less strict about end point matching and use the width of the track
as the criteria to determine suitability.
Finally, delete any short lengths of track at the end of the operation
and amend the arc end points to keep connectivity.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7967
2021-04-06 12:52:01 +00:00
0a2c8575ce
ZONE properties: stage commit even if !Settings().m_AutoRefillZones
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8028
2021-04-06 12:52:01 +00:00
69fd0b38ff
Remove a couple of unused OnUpdateUI handlers.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/5049
2021-04-06 13:47:15 +01:00
daaf738c7f
Add save-as files to file history.
...
Also fixes where lock wasn't getting reset on a Save As.
Fixes https://gitlab.com/kicad/code/kicad/issues/8111
2021-04-06 13:35:26 +01:00
b2f788adc1
PNS: Fix UseConnectedTrackWidth when starting from ARCs
2021-04-06 01:27:13 +00:00
e46c9d35ac
Add undo/redo handling to length tuner event loop
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8129
2021-04-05 19:58:14 -04:00
24cd174a23
Don't dereference a possibly-invalid optional
2021-04-05 19:34:57 -04:00
ec45855aed
Make sure drawing layer is visible.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8106
2021-04-06 00:06:23 +01:00
9a764126ce
CADSTAR PCB: Keep all tracks as a single chain where possible
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8119
2021-04-05 20:15:09 +01:00
a6c3d74a73
Pass active layer to StartRouting in length tuner
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7857
2021-04-04 21:51:54 -04:00
a24bc34b66
Better colors for length tuning popup in dark mode
2021-04-04 20:33:59 -04:00
c7ecb51f77
Update PNS length tuning algorithm to match the new BOARD algorithm
...
Now tracks inside pads are optimized to give a more accurate length.
Also, the start/end of the assembled line is used to identify the right
pad joints for pad-to-die length calculation.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/4204
Fixes https://gitlab.com/kicad/code/kicad/-/issues/1765
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6877
2021-04-04 20:27:22 -04:00
41c54d383e
Fix some edge cases with length calculation
2021-04-04 19:38:54 -04:00
cdfb014ab6
CHANGED: Account for via height in track length calculations
2021-04-04 13:59:18 -04:00
80728f8d78
Improve algorithm for calculating net length; use it for netinfo message panel
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/4258
2021-04-04 12:27:09 -04:00
6b24abac8f
PNS: Don't snap to end items if snapping is disabled by modifier key
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8033
2021-04-04 10:22:23 -04:00
52ca7ed27c
Naming conventions.
2021-04-04 10:43:56 +01:00
c1df77f59b
Terminology.
2021-04-04 10:32:24 +01:00
98e6a089ab
Treat board edges same as graphics for locked/unlocked.
...
It would appear that not using the locked/unlocked graphics filters
is confusing too (see deleted comments in code).
Fixes https://gitlab.com/kicad/code/kicad/issues/8114
2021-04-04 10:27:26 +01:00
2c3ee0d85f
Don't forget CommitPendingChanges.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8083
2021-04-04 01:02:31 +01:00
83ae28f04f
Fix selection when pasting/duplicating items
...
The item flags weren't getting reset after placing
the new items, so the next operation on them was
having weird behavior.
Fixes https://gitlab.com/kicad/code/kicad/issues/7528
2021-04-03 19:09:21 +01:00
cb17c9f3dd
Typo fix: Correct various misspelled words
...
agressive -> aggressive
decription -> description
miscellanous-> miscellaneous
rectange -> rectangle
Unkown -> Unknown
2021-04-03 13:39:50 +00:00
8dff3725ac
Typo fix: Correct 'allow to' -> 'allows one to'
2021-04-03 13:39:50 +00:00
52aea0a2c9
Consistent terminology.
2021-04-03 11:15:11 +01:00
c5536b2cab
Title case in menus.
2021-04-03 11:15:11 +01:00
aa09d6448a
Pcbnew: Allow Create Array on groups
...
Also removes possible null pointer dereferencing.
Fixes https://gitlab.com/kicad/code/kicad/issues/7515
2021-04-03 09:06:49 +00:00
a8896ebd73
Don't show leading ratline for unconnected net
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8040
2021-04-02 20:29:25 -04:00
d7a95e2af4
Rotate FP_TEST properly when flipping
...
The angle was `-angle` instead of `180 deg - angle` when flipping top to
bottom.
Fixing that, in turn, created some problems with justification, which
was modified both by `FP_TEXT::Flip()` and `FP_TEXT::KeepUpright()`.
What's worse, `FP_TEXT` has another mechanism for keeping the text
upright: `FP_TEXT::GetDrawRotation()` returns different angles if the
"keep upright" flag is set. But there is no analogous behavior for
justification, so the text would sometimes get shifted, and sometimes
not, depending on which mechanism was engaged. And both are used,
apparently.
Clearly, such an arrangement an open invitation to bugs and
inconsistencies. One of these mechanisms should be removed. I haven't
done this yet, and would prefer to postpone this until V6 is out.
I've fixed the justification problems, but this was by trial-and-error,
and I don't feel I really understand the behavior responsible. But I
think it's a good sign that most of my changes are line removals, not
additions. Flipping is a simple operation, it's just mirroring and layer
change. If something simple has a complicated routine, then it's
probably full of hacks.
Fixes https://gitlab.com/kicad/code/kicad/issues/7289
2021-04-02 21:13:21 +00:00
0a660c2364
Pcbnew: Remove 180 deg rotation when flipping PCB_TEXT in some cases
2021-04-02 21:13:21 +00:00
99fd872fce
Pcbnew: Do not move footprint fields twice in align/distribution tools
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8094
2021-04-02 21:09:36 +00:00
7655533412
Do not move footprint fields twice when performing Move Exactly
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8062
2021-04-02 21:07:59 +00:00
1931677316
Ensure the layer dropdowns are correctly sized
...
On GTK, the layer dropdown was sized based on an empty list,
so for non-default fonts it would be undersized and cutoff
the font.
2021-04-02 21:33:31 +01:00
1db5e2bc96
Don't force an entire refresh of toolbars to update sizes
...
Forcing an entire refresh of the toolbars is wasteful,
so instead just update the sizers directly.
2021-04-02 19:12:21 +01:00
d3bf20e80b
Pcbnew, place free via: take netcode from the pad, if the via is inside a pad.
...
Fixes #8089
https://gitlab.com/kicad/code/kicad/issues/8089
2021-04-02 17:19:44 +02:00
f88d39b4f0
Fix state issue in router's switch layer handling.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7590
2021-04-01 18:10:04 +01:00
f6f31b7654
Get rid of save warning after Footprint Editor Save As.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8084
2021-04-01 11:17:24 +01:00
94470bfa15
Minor cleanup.
2021-04-01 11:10:01 +01:00
0c4184f1a4
Split lib tree initialization into a two-pass affair.
...
This is under the supposition that we can't set the column widths
on some Mac instances because the host controls haven't yet been
created. This is primarily conjecture based on looking at things
that have the *possibility* of going wrong. Why this only happens
in some installs is beyond me.
Fixes https://gitlab.com/kicad/code/kicad/issues/5479
2021-04-01 10:51:29 +01:00
90abc8ba8b
Excellon drill files: slightly change comments inside files
2021-04-01 07:38:00 +02:00
b6f2941a06
Another try a allowing touching courtyards.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8076
2021-03-31 22:54:30 +01:00
a530c22eff
Shorten "Allow free pads" tooltip and rename button "Skip Locked Items"
2021-03-31 18:28:18 +00:00
7077e59395
Make moving pads independent of footprint much harder with new setting
...
It is still possible to move a pad independent of footprint through
the pad properties dialog. This is a much more conscious decision
than using the move tools.
ADDED: "Allow free pads" preference setting in pcbnew, default to off.
When enabled, allows moving unlocked pads independent of the footprint
(i.e. previous behaviour). When disabled (default), any attempt to move
a pad will move the parent footprint instead.
REMOVED: "Lock pads of newly added footprints" preference setting in
pcbnew. (Pad lock state is now loaded from the footprint definition)
CHANGED: There are now only two possible lock states for a footprint:
locked and unlocked. The lock state of the pads in the footprint is
now independent of the footprint lock state.
Also fixed a latent bug that would allow a pad to be moved when the
parent footprint was locked (see m_selectionTool->RequestSelection
lambdas in edit_tool.cpp)
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7739
2021-03-31 18:28:18 +00:00
737262ffa8
Allow touching courtyards.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8076
2021-03-31 10:44:59 +01:00
0a0935e0f3
Remove ACTIONS::TranslateLegacyId and TOOL_DISPATCHER::DispatchWxCommand
...
After commit 9535153f9e
2021-03-30 23:20:22 +00:00
8cb6f15687
Warn when diff pair router can't start due to too-small-gap.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7795
2021-03-30 19:49:23 +01:00
b151dd02b9
CADSTAR PCB: Fix incorrect solder mask/paste clearance
...
Need to divide by two as this is a clearance, not diameter.
2021-03-30 13:03:56 +00:00
ad2043eda6
CADSTAR PCB: DrillXoffset and DrillYoffset are zero when not specified
...
Fixes an issue that resulted in pads being loaded 100nm off from the
original CADSTAR position.
2021-03-30 13:03:56 +00:00
6eb2e2a6e3
Fp editor: do not change item UUIDs when loading a footprint from library.
...
Fixes #8066
https://gitlab.com/kicad/code/kicad/issues/8066
2021-03-30 12:58:22 +02:00
78a60e9dfb
PNS: Put polygon error outside pad shapes
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7672
2021-03-29 19:49:59 -04:00
6cbc3fb97d
Fix a minor inconsistency between router and DRC
...
Also make sure collision highlighting runs at the starting
location of a drag.
See: https://gitlab.com/kicad/code/kicad/-/issues/7672
2021-03-29 19:41:17 -04:00
8be9832153
PNS: Don't highlight Net 0 (the unconnected net)
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8040
2021-03-29 17:45:07 -04:00
38c849bde7
Pcbnew: load write board netlist to file tool action dynamically.
...
Loading this advanced configuration option statically will cause it to
show up in the hotkey list even when the option is disabled. Creating
the tool action at run time resolves this issue.
2021-03-29 09:04:55 -04:00
3c51964c57
drill report: use more digits in float values for diameters.
...
(Use same resolution in map and rpt files)
2021-03-29 13:02:43 +02:00
f2e68e68d0
Add "Hide Tree" context menu options when tree has no selection.
...
Also cleans up some other code to be more consistent between symbol
editor and footprint editor.
Fixes https://gitlab.com/kicad/code/kicad/issues/8052
2021-03-29 12:02:00 +01:00
6d2f80b4cf
Pcbnew: add write board netlist to file support.
...
This is hidden behind an advanced configuration setting and is primarily
useful for developers trying to troubleshoot the netlist payload sent
from the board editor to the schematic editor.
Fixes https://gitlab.com/kicad/code/kicad/issues/8051
2021-03-28 08:38:29 -04:00
475ac3697f
Ensure toolbar controls have the correct width on frame creation
...
Otherwise they could be slightly too small and then look odd.
2021-03-28 13:07:56 +01:00
d0d6352a25
Fix crash launching footprint editor frame
...
Apparently we get this event before the frame is fully-baked
2021-03-27 23:48:07 -04:00
42c6af4bd8
Cleanup ACTION_MENU creation in some places
...
The ACTION_MENU constructor now takes the tool as an argument,
so the call to SetTool() immediately following it can be removed
and the tool just passed into the constructor.
2021-03-27 19:16:58 +00:00
9535153f9e
Move the import graphics menu item to the action
2021-03-27 19:04:16 +00:00
7bfa8575fa
Remove redundant information from import/export menu item labels
...
Saying "Import/Export" on the labels when the submenu has "Import"
or "Export" in it is redundant.
Note that we can't just update the action text with the new name,
because that is used in the hotkey list and would become too confusing
without the "Import"/"Export" text.
2021-03-27 18:50:35 +00:00
eb8744816e
pcbnew: fix the i18n of the rules syntax help
2021-03-27 16:26:13 +00:00
f6041fb52d
Force update of some text when activation status changes
...
The text areas aren't always redrawn when the window is activated
or deactivated, so we need to force a refresh of the text to ensure
it is the correct font color.
2021-03-26 15:50:56 +00:00
d18323dcf0
Excellon file writer: remove not very useful comments outsider the header section.
...
Looks like comments outside header section can create problems in some readers.
Note: comments inside header section are clearly allowed in Excellon file format)
(trial to fix bug 8032)
2021-03-26 09:46:32 +01:00
132ec37b56
Handle arc in buildHullForPrimitiveShape
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8008
2021-03-25 21:25:30 -04:00
34a435cd56
CADSTAR PCB: Handle import of pads with different paste and mask sizes
...
KiCad doesn't yet support full padstacks, but at least we can use the
solder mask / solder paste expansion to import a better result. Also
we can disable the specific layer if the shape has a size of zero.
2021-03-25 17:54:56 +00:00
107a1990c9
CADSTAR PCB: Handle route offset
...
The CADSTAR post processor has a peculiar feature called "route offset"
which effectively shortens tracks when the pad, track or via that it
connects to has a smaller width. This operation is not saved in the
design itself, but applied as a post processing operation meaning that
the importer has to apply it when loading on the board.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6648
2021-03-25 17:50:33 +00:00
1468764f83
CADSTAR PCB: Lock footprint pads after import
2021-03-25 17:50:33 +00:00
3279e295ac
Don't start filling zones with possibly stale caches.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8014
2021-03-25 17:20:08 +00:00
a2ffb45698
Update diff pair rule syntax to be clearer.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8010
2021-03-25 10:29:38 +00:00
bbd7b4ca8c
Eeschema, selection tool: uniformize the cursor shape and the actual modifiers.
...
SHIFT, CTRL, ALT modifier keys were handled in 2 different codes, one for
the selection tool and another to modify the mouse cursor shape, with 2
different configs.
Now the modifiers are managed from only one function.
Pcbnew: group also SHIFT, CTRL, ALT modifier keys management to a specific function.
Fixes #8021
https://gitlab.com/kicad/code/kicad/issues/8021
2021-03-25 10:28:20 +01:00
9a0f9575b6
Fix minor Coverity warnings
2021-03-25 09:12:24 +01:00
41839f7e3f
Update panel_setup_rules_help.md diff pair clearance example to use new A.isCoupledDiffPair() function
2021-03-25 03:33:19 +00:00
cb722c6bfa
Code style
2021-03-24 18:11:32 -04:00
75819206a0
Add support for dark theme in plugin icons
...
Action plugin authors can specify alternative icon path for dark theme.
If it's not specified then standard icon will be used for both light and
dark themes. If neither icon is specified then the default puzzle piece
icon is used.
Fixes #7984
2021-03-24 21:59:30 +00:00
b37b7d53b4
Fix geographic annotation bug when back annotating to schematic.
...
For some reason, the footprint UUID was being prefixed to the sheet path
which caused the symbol look up by sheet path to fail. An option was
added to not do this when the geographical back annotation to the schematic
is performed.
2021-03-24 09:57:36 -04:00
e409b04538
More gracefully handle tinyspline not liking a spline definition
...
Partial fix for #6634
2021-03-24 00:37:01 -04:00
f57dcf2a34
Fix connectivity to only resolve conflicts on netlist load
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8007
2021-03-23 17:43:24 -04:00
a94ce75c02
Fix multiple filter calls that were producing false cache positives.
...
When processing a compound shape we'd decide the first of them didn't
collide and then put false into the cache. The cache value would then
be used for all the other shapes in the compound shape, which very well
might actually collide.
Fixes https://gitlab.com/kicad/code/kicad/issues/8003
2021-03-23 21:06:16 +00:00
a94a481574
Fix compile warnings
...
Some simple warnings and also a deprecation warning from wx
because they felt that a function should be renamed...
2021-03-23 19:46:49 +00:00
4dbeb15024
Use a worker thread to send socket commands
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6503
2021-03-23 03:20:40 +00:00
381cc27548
Add missing include
2021-03-22 21:25:03 -04:00
49b1aceb8b
Handle doc urls enclosed in parens.
...
It seems this has become a common pattern in at least some of our
libraries.
Fixes https://gitlab.com/kicad/code/kicad/issues/7963
2021-03-22 21:20:54 +00:00
f24f0d93a5
Make OK default in inspectors (and hook up to close window).
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7831
2021-03-22 21:20:54 +00:00
a677998f47
Don't select new items after cancelling move following item duplication
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7956
2021-03-22 18:49:43 +01:00
9ce34102af
Make sure projects get created for boards migrated from 5.x
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6886
2021-03-21 16:21:44 -04:00
8be213e36f
Trim includes (and use consistent terminology in error messages).
2021-03-21 20:15:47 +00:00
a9eb83201e
Remove ZONE::ClearFilledPolysList() and fix ZONE::Unfill()
...
ClearFilledPolysList is redundant and Unfill() was missing the clearing
of m_insulatedIslands
This fixes potential latent bugs in zone unfilling.
2021-03-21 20:13:20 +00:00
50aafb9d2a
Do not auto-refill zones when added or edited
...
The only exception is when using the Zone Properties Dialog and
user preference is enabled
2021-03-21 20:13:20 +00:00
7a255edc5f
Panel Edit Options: Fix "Show Page Limits" tooltip message
2021-03-21 20:13:20 +00:00
f6c4677189
ADDED Option to disable automatic zone filling in pcbnew
...
The new setting is stored as 'editing.auto_fill_zones' and controls
whether zones should be refilled after certain actions or not.
2021-03-21 20:13:20 +00:00
a743e0c52b
Add Zone fill to undo stack
...
Allows undoing zone filling and reverting to previous fill state.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7440
2021-03-21 20:13:20 +00:00
5e0b65c3a8
Change wording of corner rounding action
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/4505
2021-03-21 15:55:56 -04:00
37242f67e0
Connectivity: just pick the most popular net to update conflicting clusters
...
CHANGED: when pad net assignments are changed in a conflicting way (i.e.,
tracks exist that short out more than one net after the change,
track nets will be updated to the net with the most pads).
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7929
2021-03-21 15:31:37 -04:00
f0ed5fab39
add missing include for wxWidgets 3.1.4
2021-03-21 17:35:20 +01:00
e1840ccbd3
Handle exceptions thrown by footprint library table
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7973
2021-03-21 11:43:24 -04:00
68f3d09ac1
altium: introduce tokenizer for query language
...
Based on this tokenizer, a LL1 parser will be built in the future.
2021-03-21 16:39:23 +01:00
fe196771d8
Implement isCoupledDiffPair() DRC rule function.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7975
2021-03-20 23:07:36 +00:00
44e2151ade
Allow diffpair gap to override netclass clearance value.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7975
2021-03-20 21:53:30 +00:00
ce46fe6581
Add insideFrontCourtyard and insideBackCourtyard DRC functions.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7972
2021-03-20 21:53:30 +00:00
07aea4339d
Formatting.
2021-03-20 21:53:29 +00:00
4a53917efa
wrml exporter: optimize circle to segment approximation.
2021-03-20 18:16:58 +01:00
f1c599fa4d
Tweak PCB selection behavior to reduce unintuitive behavior
...
We were discarding shapes too aggressively for having a
larger area than a shape underneath.
Let's also try showing fewer disambiguation menus, in particular
always preferring items on the active layer when the candidates
include overlapping items of similar area on other layers.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7949
2021-03-20 13:11:51 -04:00
6924b98bc3
Remove deprecated BRIGHT_BOX preview item
2021-03-20 12:09:20 -04:00
c04e19f9ac
Include optimization: move some things from common.h to point-of-use
2021-03-20 12:09:18 -04:00
6d5536707c
wrml exporter: remove all duplicate code with Pcbnew. Especially, converting layers to polygons exist in Pcbnew, so no need to rebuild item shapes in the exporter. Moreover, in exporter, rebuilding shapes was not up to date and did not include changes in Pcbnew.
2021-03-20 13:44:52 +01:00
4073153e75
vrml exporter: fix incorrect export of zones on solder mask layers. minor changes in colors.
2021-03-20 11:13:55 +01:00
7a8abcadd2
PCB_SHAPE: Use SHAPE_ARC as the effective shape of an arc
2021-03-19 22:43:43 -04:00
6c3b02aabe
Cleanup (no functional changes).
2021-03-19 16:14:34 +00:00
3fec3a3a15
Fix a minor Coverity warning
2021-03-19 15:01:16 +01:00
90742bba9f
Adjust constraints after editing other points.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7103
2021-03-19 11:35:17 +00:00
4034fcb7ac
Fix yet another edge case in B&W printing of holes.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7944
2021-03-18 23:50:04 +00:00
af88b01068
export_vrml: Better export of pad shapes, both on copper and paste layers.
...
It removes duplicate code between Pcbnew and the vrml exporter.
Remove also an useless option (plain board) that exported just the board body.
2021-03-18 20:43:27 +01:00
8d5161dae2
export_vrml: more code cleanup and export solder mask
2021-03-18 16:44:28 +01:00
95051c4786
Also duplicate arcs in pcbnew
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7943
2021-03-18 13:35:30 +00:00
e377f2667e
Adding COMMIT support before/after invocation of a python script
...
Allows undo/redo of ACTION_SCRIPT commands
2021-03-18 12:52:17 +00:00
16ef1910ff
export_vrml: more code cleanup and fix incorrect shape of round chamfered pads
2021-03-18 13:35:06 +01:00
074f0432f0
vrml exporter: more cleaning code and enhancements. Dialog exporter: Add option to use board center as coord origin.
2021-03-18 09:52:04 +01:00
b050823c98
export_vrml.cpp: mainly clean code and add some fixes.
2021-03-18 09:52:03 +01:00
36259b1f6b
Refresh lib trees after editing library tables.
...
Also make sure that we grab the library item descriptions from their
source rather than just the cached tree copy.
Fixes https://gitlab.com/kicad/code/kicad/issues/7875
2021-03-17 14:54:18 +00:00
46d71f0d23
Go back to validate-on-OK, but stop doing design checks.
...
If we keep doing design validations at two different places, they can
only start to drift apart. Board Setup should validate for malformed
data ONLY; everything else is the business of DRC.
This also fixes a bug where implementation validations would not allow
OK in the dialog, but wouldn't put up a message to say why. We now use
the InfoBar impl from Jon's commit for that.
2021-03-16 14:49:03 +00:00
bb8d31cd06
Fix context item selection filter type omissions
...
Fixes #7839
2021-03-16 13:08:50 +00:00
cad1cb0262
Improve naming.
2021-03-16 12:07:06 +00:00
c7648b4dba
Formatting.
2021-03-16 12:07:06 +00:00
2ad9da582a
Refresh geometry when clearance changes if clearance lines are shown.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7906
2021-03-16 12:07:06 +00:00
c3c3649211
Stop text from causing a shift during flip when >1 items are selected
...
1e1be730https://gitlab.com/kicad/code/kicad/issues/7304
2021-03-15 21:24:16 +00:00
b2ac9cc29f
Formatting & naming conventions.
2021-03-15 19:04:59 +00:00
a086795ac9
Pcbnew: fix dimensions text rotation and position.
...
Issue #6940 is not addressed, as being able to
rotate a dimension with a group is preferred over
easily rotating the text.
Fixes https://gitlab.com/kicad/code/kicad/issues/3847
2021-03-15 15:44:36 +00:00
cb451dc4b2
Pcbnew: Fix memory leaks and fix inefficient code.
2021-03-14 20:27:59 +01:00
52e2bf0000
Keep focus on filter boxes in footprint viewer
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/4884
2021-03-14 15:10:20 -04:00
a1b4bcc210
Refinements (add icons to menuitems and better help strings)
2021-03-14 18:44:31 +01:00
c763b0088e
Fix some issues in drawing_stackup_table_tool.cpp
2021-03-14 17:44:16 +01:00
3ba7fc0cc2
Move board stackup table drawing code from drawing_tool.cpp to drawing_stackup_table_tool.cpp
...
This avoid a too large drawing_tool.cpp file.
Remove also values in internal units and convert them to mm.
2021-03-14 17:44:16 +01:00
521982cbf6
Avoid double-redraw on board load
2021-03-14 11:42:09 -04:00
2cbd7b5043
Reduce scope of some view repaints to improve performance
2021-03-14 11:42:09 -04:00
2528e1fc98
EXCELLON_WRITER: update info in comments.
2021-03-14 12:38:03 +01:00
953279ce70
Gerber plot: fix missing AperFunction attribute for texts.
...
Fix also a incorrect AperFunction attribute for graphic items on Edge.Cuts
in footprints
2021-03-14 12:37:13 +01:00
f428ce03f2
ADDED: pcbnew - stackup / characteristics table
2021-03-13 20:19:46 +00:00
18470693fe
Copy linewidths when coverting to polygons.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7893
2021-03-13 17:06:49 +00:00
93db7a130a
Offset 3D models when moving footprint origin.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7868
2021-03-12 17:37:38 +00:00
faf9cca938
Fix many cases of old mils flag getting interpreted as allowEval flag.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7883
2021-03-12 15:15:50 +00:00
24fd326cd1
Make sure we have different strings for past & future tense.
...
(In English both were 'Set', but that means our translation framework
won't support two different strings in other languages. Changed to
'Add' and 'Added'.)
Fixes https://gitlab.com/kicad/code/kicad/issues/7888
2021-03-12 14:59:38 +00:00
ba46a8d12d
Fix some layout issues resulting from wxWidgets version bump.
2021-03-12 14:54:54 +00:00
a01bd52571
Use default line width when creating polygons.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7876
2021-03-12 14:54:54 +00:00
18037e2f65
Rework bitmap system to load from archived PNGs
...
Bitmaps are now identified by an enum class instead of by pointers.
Bitmap loading and caching is now handled by a class in common, and
we no longer compile most bitmaps into the binary, so there is no
longer a bitmaps static library.
Instead, bitmaps are archived to a .tar.gz file which is installed
in ${KICAD_DATA}/resources/images.tar.gz
The source PNGs are checked in to Git as the original CPP files were,
so that people can build without the required dependencies to convert
SVGs to PNGs.
Initial support is also added for dark theme icons, although this
is not yet exposed in the GUI.
Stubs are present for multi-resolution image resources, but this is
not fully-baked yet and could use some refinement.
2021-03-11 08:37:35 -05:00
4db10d419d
Implement future & past tenses for dry-run vs. changes made report.
...
Also improves zone reporting to list either the zone name or the layer
and coordinates.
Fixes https://gitlab.com/kicad/code/kicad/issues/7851
2021-03-11 12:34:02 +00:00
ea9c269914
Don't fill polygons converted from lines.
...
The lines couldn't have been filled, so the polygon shouldn't start
out filled either. The user can set it to filled if they want.
Fixes https://gitlab.com/kicad/code/kicad/issues/7867
2021-03-11 10:42:21 +00:00
4b88d4beed
Don't police the user.
...
There are too many holes and the police-state just makes it harder to
get back from error conditions.
Fixes https://gitlab.com/kicad/code/kicad/issues/7867
2021-03-11 10:38:32 +00:00
e48f86bfd6
Move default assignment on Mac.
...
CHANGED: add corner and repeat last command now default to 'I' instead
of '<insert>' on Mac.
1) wxWidgets doesn't currently display the correct graphic in the menu
for the insert key
2) Mac laptops don't have an instert key
Fixes https://gitlab.com/kicad/code/kicad/issues/5016
2021-03-10 13:35:04 +00:00
d4231d8e9f
Pcbnew: add footprint keepouts to Specctra DSN exporter.
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7684
2021-03-10 07:18:37 -05:00
3d4ac9af03
Relocate win32 resource files to the central folder for further consolidation
2021-03-09 21:48:14 -05:00
d160b30ff1
Pcbnew: add keepout helper methods to ZONE object.
2021-03-09 08:13:06 -05:00
60b17e727a
Make sure pad locked flags get transferred on ExchangeFootprint.
...
They used to be in the footprint but were moved to the individual
pads a few months ago.
Also applies to text items.
Fixes https://gitlab.com/kicad/code/kicad/issues/7844
2021-03-09 12:29:14 +00:00
e2aa7be4b3
Added a lot of consts and refactored a few lines
2021-03-08 12:49:48 -08:00
2bc10d58b5
Fix some cases where PCB_FP_ZONE_T was left out.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7615
2021-03-08 13:00:46 +00:00
274d4e2eb4
Fix orientation of orthogonal dimensions
...
When drawing and editing orthogonal dimensions, take distance and
relative position to the end points into account.
Fixes https://gitlab.com/kicad/code/kicad/issues/7243
Fixes https://gitlab.com/kicad/code/kicad/issues/7189
2021-03-08 00:13:38 +00:00
0f22b54cd8
Clip the leader lines properly when using circular text frame
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7810
2021-03-07 21:19:19 +00:00
720147d272
Remove transitive inclusion of bitmaps.h
2021-03-07 16:08:57 -05:00
df99ee39d9
PNS: new through vias should span all copper layers
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7576
2021-03-07 17:58:43 +00:00
47145d349b
Don't run insideArea on ruleAreas.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7826
2021-03-07 17:55:30 +00:00
e0cbcc3330
Excellon drill files: add structured comments to identify via holes and pad holes.
...
This is useful for CAM tools because constraints for via holes and pad holes are
not the same
2021-03-07 17:47:37 +01:00
fde22da478
Greber drill files: Enable using flashed shapes for oval holes.
2021-03-07 17:44:59 +01:00
0fde536223
Adjust zones when moving footprint origin.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7825
2021-03-07 15:04:01 +00:00
d57f5b1a2c
DIALOG_GENDRILL: fix incorrect initialization of drill coord origin option
...
Fix also missing board change mark when drill plot settings are modified.
2021-03-06 09:47:42 +01:00
b691c18bfc
Allow netclass assignents to unnamed nets.
...
Most of the code had already moved over to this, but there were a few
hold-outs.
Fixes https://gitlab.com/kicad/code/kicad/issues/7802
2021-03-05 19:16:09 +00:00
3e9eb3c8ac
More complete fix for crasher JP found.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7806
2021-03-05 15:30:52 +00:00
68f958145d
Gracefully handle lack of diff pair settings
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7806
2021-03-05 09:09:56 -05:00
4ddb942ec0
Do not allow drag selection or drag move when already moving something
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7800
2021-03-04 19:01:31 -05:00
c85c14e6e4
Don't allow exponential notation in specctra export.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7786
2021-03-04 22:39:33 +00:00
bbf02a5f08
Formatting.
2021-03-04 21:23:45 +00:00
528f933ad5
Don't revert commit after user has OK'ed the dialog.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7799
2021-03-04 19:16:43 +00:00
d18afa42cd
Resync nets & netclasses after updateFromPCB.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7793
2021-03-04 15:05:06 +00:00
91350ec9ea
Don't update thickness unless it really changed.
...
Otherwise we're going to generate a continuous stream of OnUpdateUI
events....
Fixes https://gitlab.com/kicad/code/kicad/issues/5049
2021-03-04 14:15:39 +00:00
8831c5567c
Add win32 version manifest block
2021-03-04 00:34:48 -05:00
1fc399fa31
Fix a few more cases of picking up wrong mouse positions
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7745
2021-03-03 20:09:24 -05:00
1e1be730d8
Do not recalculate center from boundaries when flipping
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7304
2021-03-03 23:33:31 +00:00
b9d26a55f2
Show variable references of text in status bar.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7790
2021-03-03 18:58:04 +00:00
fcb9af2b12
When saving footprint to library don't detach from board too early.
...
In particular, make sure it's been flipped to the front layer first.
We need to know the layers to do the flip.
Fixes https://gitlab.com/kicad/code/kicad/issues/7780
2021-03-03 15:07:01 +00:00
51d445007f
Switch to using make_shared in another place
2021-03-03 02:19:46 +00:00
908de37e7c
Don't hardcode the file extensions where possible
2021-03-03 01:13:59 +00:00
81570e02f3
Do not change orientation when moving orthogonal dimensions
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7727
2021-03-02 19:59:16 +00:00
bbd6a1db0e
Formatting
2021-03-02 19:57:19 +00:00
b33ec125ac
use "pattern" instead of "sourcelibreference" for footprints
2021-03-02 19:57:19 +00:00
a9ca1e4ebd
use "pattern" instead of "sourcelibreference" for footprints
2021-03-02 19:57:19 +00:00
6533b47f0a
use "pattern" instead of "sourcelibreference" for footprints
2021-03-02 19:57:19 +00:00
f90164f7cf
Fix some typos and improve wording
2021-03-02 19:13:49 +01:00
3199a88d54
Fix pcbnewshell not showing namespace inspector tools
...
on msvc build with recent wxpython
2021-03-02 17:12:57 +00:00
79a9d69ff5
Coverity fixes for issues 314755, 316287, 324536, 324539, and 324539.
2021-03-02 08:10:37 -05:00
d06e8ef01c
Honour pre-defined-size selections for diff pairs.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7759
2021-03-02 12:12:05 +00:00
7760570d76
Treat action buttons in Symbol/Footprint Properties as OK, not Cancel.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7001
2021-03-01 20:37:04 +00:00
57e948ff08
Make sure axesEnabled is set before saving config.
...
We don't actually allow the user to change this at present, so one
could argue that we should remove it from what is saved out of the
config. But this is a smaller, safer change.
Fixes https://gitlab.com/kicad/code/kicad/issues/7666
2021-03-01 20:37:04 +00:00
cc6df515a1
Make ARCs accessible from python
2021-03-01 17:34:47 +00:00
f4cc9b86e3
Inform user (and bail on UpdatePCB) if annotation failed.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7310
2021-03-01 16:57:29 +00:00
1a9f55872c
Don't leave a pad with a netinfo pointer from the footprint editor.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7766
2021-03-01 11:12:51 +00:00
83d07dc7f7
Comments.
2021-03-01 11:12:51 +00:00
63b5d8db43
Pcbnew: use MRU path when opening files in standalone mode
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7734
2021-02-28 14:30:16 -05:00
dbb6d0fb4a
Move paste and mask clearance settings back to board file
...
These are needed for correct Gerber plotting so need to be stored
along with the board file
2021-02-28 14:04:28 -05:00
4debfbcc53
Fix pcbnew cross probing ignoring the disabling of the cross probing zoom to fit setting
2021-02-28 10:39:51 -05:00
cd7a2cd807
Fix shadowing fix that caused logic bug and different shadowing
2021-02-27 20:01:14 -05:00
65531accf6
DRC: allow testing against particular diff pair membership
2021-02-27 19:54:55 -05:00
061218e567
Take a stab at fixing Python build issue.
2021-02-27 23:56:47 +00:00
3538c8a963
Thread safety for new caches (which are also used during zone fill).
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7749
2021-02-27 21:33:30 +00:00
2606ecc619
Add isDiffPair() to custom rule syntax examples.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7746
2021-02-27 19:45:03 +00:00
ccba4b1462
Pcbnew: don't show project warning on stackup pages
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/5568
2021-02-27 14:28:24 -05:00
14e670408e
Fix some bugs in rule examples and add some more examples.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7744
Fixes https://gitlab.com/kicad/code/kicad/issues/6884
2021-02-27 19:21:41 +00:00
d269778cd4
PNS: disable smart pads in walkaround if posture is forced
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7710
2021-02-27 13:48:01 -05:00
5ca25a609e
Pcbnew: fix shadow variable in expression evaluator.
2021-02-27 12:09:06 -05:00
f952434aee
Replace "pours" with "fill" in Rule Area
...
KiCad terminology refers to copper "Fill" rather than copper "Pour".
Also adds some tooltips for the various options
Fixes https://gitlab.com/kicad/code/kicad/issues/7740
2021-02-27 08:32:05 -08:00
bcc3767c2a
FABMASTER: Fill both kinds of silk polys
...
Silkscreen polygons are always filled (I think) in FABMASTER. Other
layer polygons are not
2021-02-27 06:58:04 -08:00
eae9e954c3
Hide BOARD internals that shouldn't be wrapped from swig
2021-02-27 08:54:21 -05:00
6d6765cdaf
Improve DRC status reporting.
...
1) Don't report on tests not run.
2) Don't cancel subsequent tests because the current test didn't
have any constraints
3) Exit a little bit quicker when cancelled
Fixes https://gitlab.com/kicad/code/kicad/issues/7724
2021-02-27 13:44:45 +00:00
4ede4e061e
More DRC performance work.
...
Push DRC zone RTrees into BOARD so that they can also be used by
insideArea.
All these caches are a bit of an encapsulation leak, but they make a
significant impact on performance.
Fixes https://gitlab.com/kicad/code/kicad/issues/7720
2021-02-27 11:45:04 +00:00
283d176cdc
Use std::locale::classic() globally
...
This is a better alternative when imbuing streams
2021-02-26 17:21:55 -08:00
5d352d2373
FABMASTER: Enforce KiCad limits on line width
...
We require unfilled polygons to have positive width
2021-02-26 17:16:54 -08:00
7e0168a99d
FABMASTER: Process newer outline tag
...
Allegro uses the subclass "DESIGN_OUTLINE" in newer version for their
edge cuts instead of just "OUTLINE". This handles both.
Fixes https://gitlab.com/kicad/code/kicad/issues/7735
2021-02-26 17:06:56 -08:00
c9b39aaaed
FABMASTER: Process REFDES position
...
The reference designator is stored separately with the Tracks, so we
need to extract position/size data from it there and match back to the
components later.
Fixes https://gitlab.com/kicad/code/kicad/issues/7733
2021-02-26 17:04:21 -08:00
b82fcbcad6
More exception var disuse warnings
2021-02-26 19:30:58 -05:00
75c525af4f
FABMASTER: Handle polygons better
...
Polygons in non-etch layers need special handling to ensure they get
treated the same.
Fixes https://gitlab.com/kicad/code/kicad/issues/7731
2021-02-26 14:01:04 -08:00
2d5015c217
FABMASTER: Try harder to figure out nets
...
Find all intersecting points both forward and back between the filled
areas and the outlines in order to determine the proper net assignment
for the zones
Also creates rule areas for special zones instead of filled zones
Fixes https://gitlab.com/kicad/code/kicad/issues/7732
2021-02-26 13:06:06 -08:00
b31bf1e40f
Always store via drill value in .kicad_pcb file.
...
Old boards were using UNDEFINED_DRILL_DIAMETER value in file for via drill when
the via drill value was the netclass value.
Recent boards always set the via drill to the actual value, but now we need
to be sure always store the drill value, because netclass value is not stored
in the board file. Otherwise the drill value of some (old) vias can be unknown
2021-02-26 20:57:43 +01:00
73dd93701a
FABMASTER: demote odd graphics warning
...
Drill layers have many different shapes in FABMASTER. These are not
used for board information, so we can ignore them.
2021-02-26 11:37:21 -08:00
ae2a9ef538
Use std::locale::classic static local
...
Prevents performance issues when creating new locales under MSVC
2021-02-26 11:37:21 -08:00
103dde67f6
FABMASTER: Handle rotated/flipped custom pads
...
The rotate mirror actions need to line up with the expectation.
FABMASTER keeps elements board-referenced while KiCad has some elements
referenced to the board and some referenced to the footprint
2021-02-26 11:37:21 -08:00
ff1300d13b
FABMASTER: Preallocate vectors
...
Reserves memory for vector elements based on file size. This helps
reduce the number of re-allocations needed when reading large files
2021-02-26 11:37:21 -08:00
f226373324
Add cache for insideArea() and insideCourtyard().
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7720
2021-02-26 19:22:25 +00:00
cb830f74b7
Bounding box caching comments.
2021-02-26 18:03:51 +00:00
d523129929
Minor performance improvements.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7720
2021-02-26 17:58:08 +00:00
c716313a24
Fix footprint hittesting. (How in the world did that compile?)
2021-02-26 17:44:36 +00:00
c7a71b44e5
Zones must be entirely inside for insideCourtyard.
...
This is a huge performance win as otherwise we're doing *lots* of
shape collisions with ground planes.
Fixes https://gitlab.com/kicad/code/kicad/issues/7720
2021-02-26 17:19:48 +00:00
22005299af
Remove old hacks for UTF8 mode.
...
wxWidgets' UTF8 mode wasn't thread-safe, so we had to put mutex's on
a bunch of string operations, which meant that we couldn't return
references to strings. Now that we no longer use UTF8 mode anywhere
(and the mutex's were removed long ago), using references is a big
performance win in some places.
2021-02-26 17:19:48 +00:00
86aaa2e9cb
Rationalize footprint bounding boxes and cache all of them.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7720
2021-02-26 13:50:27 +00:00
da005bd2a6
Pcbnew, plot files: fix very poor shape of trapezoid pads having a non null
...
clearance on mask or solder mask layers.
2021-02-26 10:36:04 +01:00
c15a9e60d4
Used cached footprints without check in preview
...
Between the time the user loads the footprint preview in cvpcb or Add
Footprint in pcbnew, we don't need to verify cache integrity to display
the footprint. We use the cache copy when displaying until we close the
selection window and re-open. This limits our need to iterate over the
full directory on every footprint display.
Alternate solutions for v7 should include looking into libfswatch for
change detection
2021-02-25 15:46:52 -08:00
b36e1c741d
Fix insidious bug which resets layer of SOLID when marking collision.
...
It's supposed to be setting the layer of the collsion display object,
not the host object, but there's a typo.
Fixes https://gitlab.com/kicad/code/kicad/issues/7712
2021-02-25 23:39:48 +00:00
75032f3acd
Use the more-constrained layer when running rules.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7639
2021-02-25 22:58:07 +00:00
54539d2cd7
Calculate timestamp the same way both times
...
Timestamps were checked using a different routine than they were
generated with, leading to the cache always being out of date.
This uses the same routine for both. While it iterates over the
directory twice during the initial load, this will never be dominant
Fixes https://gitlab.com/kicad/code/kicad/issues/7711
2021-02-25 14:36:49 -08:00
87ea540953
Fix whitespace errors
2021-02-25 17:18:23 +01:00
c79610e132
router: post-rebase fixes
2021-02-25 17:18:23 +01:00
6948cdd8ef
router: Fix return type within pointInside2
2021-02-25 17:18:23 +01:00
9bdfc13155
router: improve locality of post-shove optimization
...
Fixes : #4359
2021-02-25 17:18:23 +01:00
e1d4bb777c
router: use new LINE::Walkaround in the walkaround algo
2021-02-25 17:18:23 +01:00
045d02f818
router: add strict/loose area restriction constraint. WIP
2021-02-25 17:18:23 +01:00
24574aa2f5
router: first insert intersections, then build graph in Walkaround()
2021-02-25 17:18:23 +01:00
61e75a838b
router: replace large stack variables with std::array
2021-02-25 17:18:23 +01:00
028f209126
router: more robust LINE::Walkaround() implementation
2021-02-25 17:18:23 +01:00
e9c55cd0e3
router: if the drag anchor is not reachable by the mouse, use the closest point on dragged trace for optimizer restriction
...
Fixes : #4056
2021-02-25 17:18:23 +01:00
a141ed3444
router: feed view size change events to the router engine
2021-02-25 17:18:23 +01:00
12dfb541fc
router: expose current view area to the router algorithms so that the optimizer could know not to mess with traces/vias not currently visible to the user (wip)
2021-02-25 17:18:23 +01:00
2831c7d24c
router: fix compile error in DRAGGER
2021-02-25 17:18:23 +01:00
b67e5768a6
router: feature to save debug event log & board dump for easier recreation of router bugs and misbehaviours
2021-02-25 17:18:23 +01:00
ebdc68ac1d
router: correctly handle line width in PREVIEW_ITEMs
2021-02-25 17:18:23 +01:00
34c037684b
router: partially migrate SHOVE algorithm to use new DEBUG_DECORATOR
2021-02-25 17:18:23 +01:00
0e6cf3f56e
router: fix board edge clearance queries
...
Fixes : #7254
2021-02-25 17:18:23 +01:00
4574f52eac
router: DRAGGER::CurrentNode() should always return non-null value
2021-02-25 17:18:23 +01:00
e221b11e3b
GRID_HELPER: fixed arithmetic issue in segment snap distance check disguised as 'excessive optimization' by the dragger in the router
2021-02-25 17:18:23 +01:00
325300bd76
router: don't use compound pad shapes if pad contains a single primitive shape
2021-02-25 17:18:23 +01:00
a4bd2ad8c6
router: drag in walkaround mode now works
2021-02-25 17:18:23 +01:00
f84836f51e
router: factor out POSTURE_SOLVER to more generic MOUSE_TRAIL_TRACER class
2021-02-25 17:18:23 +01:00
af95235f47
router: report debug log events from DRAGGER
2021-02-25 17:18:23 +01:00
0306d16748
router: make post-drag optimization less intrusive
...
Fixes : #5918
2021-02-25 17:18:23 +01:00
14ce7a0ad7
router: implement area constraint in optimizer
2021-02-25 17:18:23 +01:00
64cf593ee9
router: debug points now have variable size
2021-02-25 17:18:23 +01:00
b8c95345d0
Make sure reporters have a better default path than /bin.
2021-02-25 15:05:26 +00:00
caa18c8e16
Fix bugs in diffPair hole-to-hole logic and add rule resolution.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7697
2021-02-25 14:23:02 +00:00
2c009906e5
Set unprinted layer colors to background.
...
This allows our Black&White special cases to still work when the
hole annular rings aren't being printed.
Fixes https://gitlab.com/kicad/code/kicad/issues/7692
2021-02-25 14:23:02 +00:00
bba7fae104
Coverity fixes
2021-02-24 22:55:11 -05:00
c077612163
Make sure custom shaped pad primitives get their parents set.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7696
2021-02-24 22:53:58 +00:00
d384316335
Fix some layout issues in board stackup pane.
...
Also decided the extra paramaters on the right weren't working out
on smaller screens and so moved Board Finish to its own panel.
2021-02-24 21:42:00 +00:00
fa89263c8f
Push hole-to-hole min processing down a level.
...
Also removes adding the track width to the via gap, which was
never right.
Fixes https://gitlab.com/kicad/code/kicad/issues/7173
2021-02-24 21:42:00 +00:00
0bab025832
Fixup toolchaining for immediate mode
...
The move tool can stack on others, so when we re-enter the previous tool
this caused another immediate action. We flag re-entry in the tool
stack to check for this and avoid unexpected tool starts
2021-02-24 10:44:54 -08:00
3d7c202192
Fix pad clearance bounding box and initial display
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7673
2021-02-23 22:15:39 -05:00
887ad1c30d
CHANGED: Copper layer count is now set on physical stackup page
...
REMOVED: Board layer stackup presets that were not very useful
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6765
2021-02-23 21:31:12 -05:00
d087ede21d
Don't show ratsnest on layers hidden by contrast mode
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7667
2021-02-23 20:07:46 -05:00
aedc65f20f
Fix footprint editor default grid
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7659
2021-02-23 20:07:46 -05:00
0518d9c546
Add more force-immediate tools
2021-02-23 17:05:03 -08:00
005622027f
Add component/footprint is always immediate
...
When a user clicks on the "Add Component", "Add Power" or "Add Footprint"
icon, they want to add the item. Requiring an extra click on the screen
before selecting the component/footprint is not needed.
2021-02-23 16:15:31 -08:00
f30eab422e
Don't allow footprint text item columns to be resized.
...
We auto-size them in the code and doing both produces nothing but a
mess.
Also improves the auto-sizing for the layers drop-down (particularly
needed for the new, somewhat longer, layer names.
Fixes https://gitlab.com/kicad/code/kicad/issues/7671
2021-02-23 17:46:15 +00:00
b48071015b
Don't reset focus flag yet on non-GTK platforms. It's required.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7671
2021-02-23 17:46:15 +00:00
154d56b4f4
If items exist on the "Rescue" layer, prompt user
...
Don't allow Rescue items to enter the board design. This prompts the
user to either delete them or move them to the Comments layer.
2021-02-23 09:25:00 -08:00
7f892669cc
Consistent punctuation.
2021-02-23 12:46:27 +00:00
b1943bf6b6
Don't shout at the user.
2021-02-23 12:45:37 +00:00
a3b9e8ddb4
Round 2 of Worksheet -> Drawing Sheet.
2021-02-23 11:57:44 +00:00
2013a801d1
Fix zone merge undo
...
Also remove an implicit zone merge that was happening when the user
edited the zone parameters. This appears to have been a feature but it
happened without a) telling the user and b) having the option to prevent
it.
Fixes https://gitlab.com/kicad/code/kicad/issues/7661
2021-02-22 15:45:17 -08:00
b484c0787b
Disable commands in SingleTop
...
We cannot do forward/reverse annotation in Single Top mode because we
depend on shared memory access. This disables the menu options in this
case and replaces the toolbar update pcb icon with the import netlist,
which is more appropriate for single top mode
Fixes https://gitlab.com/kicad/code/kicad/issues/7637
2021-02-22 14:49:13 -08:00
bac7b3e77a
Protect against dynamic_cast
...
Items might not be FOOTPRINT, in which case the dynamic_cast will return
nullptr. Check for this in the subfunction
2021-02-22 10:12:54 -08:00
26995b10fb
Fix uninitialized ptr
2021-02-22 10:07:40 -08:00
cad5198ab7
Worksheet -> (industry standard) Drawing Sheet.
2021-02-22 17:35:46 +00:00
a6263fc595
Remove superfluous "Rebuild Ratsnest" button
...
This happens when clicking OK already and there is nothing to change
before then.
2021-02-22 09:16:20 -08:00
c1aa50e522
Notify control when removing items without parent
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7441
2021-02-22 14:00:13 +00:00
09ebfcd650
CADSTAR Importer: Fix Code Style
...
- Rename member variable names to use the 'm_' prefix
- Rename a few object types that clashed with KiCad object names, such
as BOARD and SCHEMATIC, to avoid the use of '::' to access the KiCad
objects.
- Remove some unused code.
2021-02-22 13:24:00 +00:00
67f16110af
Fix netlist QA after API changes in 8a12aa4e
2021-02-21 20:30:57 -05:00
ba2d0cdd62
Nullptr safety.
2021-02-22 01:14:06 +00:00
68b81c8271
Don't copy footprint text along with the footprint
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7647
2021-02-21 19:59:16 -05:00
6fa0ac45af
Re-enable custom grid settings for Pcbnew
...
Add a reset button that will only show up if the user
edits the JSON configuration for grids. This is a temporary
measure until we have a real grid editor GUI in V7.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7595
2021-02-21 15:33:13 -05:00
2d28ed8eda
Move canvas backend selection to Preferences.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7630
2021-02-21 20:12:43 +00:00
3bc9d7b95e
Rework GAL layer enum to fix visibility import from legacy boards
2021-02-21 13:41:43 -05:00
fbf12cb85c
microwave tools: use ShowQuasiModal instead of ShowModal to display WX_TEXT_ENTRY_DIALOG dlgs
...
In some cases ShowModal does not work fine with our events handlers, at least on Windows.
Fixes #7641
https://gitlab.com/kicad/code/kicad/issues/7641
2021-02-21 16:01:53 +01:00
8beeb368d2
Scripting: Fix missing utf8 to unicode string conversion in swig file
...
So non ASCII7 chars in .py filenames were non working, especially on Windows.
Fixes #5507
https://gitlab.com/kicad/code/kicad/issues/5507
2021-02-21 11:38:10 +01:00
8a12aa4e3a
Handle unit changes in the netlist
...
Each symbol unit in eeschema has a unique identifier. But we don't have
a unique identifier for the entire symbol. So changing which symbol
instance was unit A (our default base for matching), changed the UUID
that we were using to match the footprints.
This commit adds all UUIDs to the netlist, allowing us to match symbol
to footprint without worrying about which unit is referenced.
This still does not handle changing different units on different sheets.
Fixes https://gitlab.com/kicad/code/kicad/issues/7604
2021-02-20 20:11:49 -08:00
2a9d76f1e3
Pcbnew: Fix snapping segment traces and graphics when initiating move
...
Fixes https://gitlab.com/kicad/code/kicad/issues/4746
2021-02-20 20:29:43 +00:00
a6c5c40f02
Fix another case of treating a modal return result as a bool.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7629
2021-02-20 18:22:34 +00:00
9dacd4abb7
Don't allow footprint children in groups outside their footprint.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7625
2021-02-20 18:09:56 +00:00
622baa6531
Silence more unused exception var warnings
2021-02-20 12:01:51 -05:00
c12666ec43
Fix arg type of NODE::followLine
2021-02-20 11:58:55 -05:00
6fce39607e
Fix return type within pointInside2
2021-02-20 11:58:55 -05:00
907e282347
Silence some msvc warnings
...
- exception variables that were unused
- RAYSEG2D improperly foward declared with class instead of struct
- unused vars
2021-02-20 11:58:55 -05:00
ec334f172b
Fix some issues with reloading of action plugins
...
First issue: the C++ action plugins list should be cleared so that any
plugins that fail to reload do not hang around on the toolbar.
This is fixed on the C++ side.
Second issue: inner dependencies of plugins that are modules were not
reloaded before, which broke reloading for many plugin examples out there.
This is fixed on the Python side by keeping track of dependencies and
clearing them out before reloading a module (unfortunately there doesn't
seem to be a way to do this in the standard library)
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7245
2021-02-20 11:19:33 -05:00
91e876ce0d
Make sure the title is updated when file is saved/reverted/etc.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7626
2021-02-20 15:09:47 +00:00
67c7e7c759
Formatting.
2021-02-20 15:09:47 +00:00
d4e68a985c
Formatting.
2021-02-20 15:09:47 +00:00
e89f9db438
Footprint disallow layer checking needs to be based on courtyards.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7620
2021-02-20 14:13:36 +00:00
0337c42d25
Swap courtyards when flipping footprint.
2021-02-20 14:13:36 +00:00
ba63ac801a
Don't make assumptions about what layers things are on.
2021-02-20 14:13:36 +00:00
a1f09befe0
Vias are plated holes too....
2021-02-20 14:13:36 +00:00
be25b7a132
Use ShowQuasiModal to show a few dialogs.
...
This change is mainly due to the fact Modal dialogs do not work when our
current tool is the tool used to create new item (text, zone, graphic).
If when this tool is active, one try to edit the properties of the new item
being created (or being placed) the modal dialog does not capture the event tool
and hangs (cannot be dismissed)
Our quasi modal dialogs have their own event loop and work.
Fixes #7585
https://gitlab.com/kicad/code/kicad/issues/7585
2021-02-20 14:24:57 +01:00
5a0a2a8366
pcbnew: only update cursor instead of activating selection tool when quiting delete tool
...
Fixes: https://gitlab.com/kicad/code/kicad/issues/7531
2021-02-20 06:40:00 +00:00
881cb3182b
Move writable dir checking lower down.
...
(Well, it was already lower down, this really just removes the higher
up calls that were getting in the way.)
Fixes https://gitlab.com/kicad/code/kicad/issues/5937
2021-02-19 22:24:08 +00:00
5994ce3711
Be more aggressive about updating title to show dirty status.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7613
2021-02-19 21:58:49 +00:00
e3560e6414
Add parent property to footprint children.
2021-02-19 21:06:45 +00:00
c2f68ca4da
Whittle down library tree context menus to be more contextual.
...
(From discussion on Zulip.)
2021-02-19 19:07:45 +00:00
d0b91b1106
Router, place via: fix issue created by 45b2bc: cancelling via must be made
...
only when the select layer is called.
Fixes #7606
https://gitlab.com/kicad/code/kicad/issues/7606
2021-02-19 17:28:20 +01:00
bbe2ee39a0
pcbnew: actually reload DRC parity checkbox value in project mode
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7551
2021-02-19 00:37:29 +00:00
54282dffe3
Move preview items using FP orientation
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7600
2021-02-18 16:32:40 -08:00
828cdacc6f
Add some missing tooltips.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7582
2021-02-18 18:33:52 +00:00
c001c26575
Pcbnew: Drag selections containing only tracks or vias
...
CHANGED: If the user made a selection and then tried dragging it, the
drag would only succeed if the selection contained at least one
footprint. Selections with only tracks and vias would instead make
KiCad drag a new selection box.
This MR allows routing of selections of a single track or via, while moving
selections containing more than one item, whether or not they also contain
a footprint.
Fixes https://gitlab.com/kicad/code/kicad/issues/7539
2021-02-18 17:49:48 +00:00
b2cd97fd84
Don't rotate/flip footprint texts along with the footprint
2021-02-18 12:39:28 -05:00
66b33834b5
Always enable save; move dirty bit to asterisk in title bar.
...
Also unifies PCB Editor and Schematic Editor names with other
locations in the GUI (which were still Pcbnew and Eeschema).
Fixes https://gitlab.com/kicad/code/kicad/issues/7587
Fixes https://gitlab.com/kicad/code/kicad/issues/7594
2021-02-18 16:05:42 +00:00
45b2bce698
Cancel placement of via if user cancels layer selection.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7578
2021-02-18 11:53:36 +00:00
59b81462ab
Fix button lay out issue on OSX.
2021-02-18 11:53:36 +00:00
6a5bba2a80
We don't really want users hand-editing library table files.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7591
2021-02-18 11:53:36 +00:00
25e78162c8
Cleanup icons
...
- Adjust group/ungroup
- Use Mirror triangles for rotate
- Smooth goto badge
2021-02-17 17:26:16 -08:00
b2a4cbedda
Add conditions for rotate/group/lock items in toolbar.
...
Also fixes cut/copy/delete conditions to allow use in immediate mode.
2021-02-18 00:10:41 +00:00
5d2dc0b50e
Fix a few (minor) issues:
...
- Make DIALOG_SHIM::SetPosition working)
- rename PCB_BASE_FRAME::SelectLayer() to PCB_BASE_FRAME::SelectOneLayer()
- PCB_BASE_FRAME::SelectOneLayer(): make dismiss dialog by escape key working.
Fixes #7578
https://gitlab.com/kicad/code/kicad/issues/7578
2021-02-17 20:56:43 +01:00
34c2028e7b
Assign via net before running DRC checks.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7579
2021-02-17 19:39:56 +00:00
0c2870c65f
Fix missing check against DELETED_BOARD_ITEM::GetInstance().
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7575
2021-02-17 19:39:56 +00:00
b6a7981e62
Write changes back to grid after using file explorer.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7361
2021-02-17 14:08:53 +00:00
d66de5bb35
Exclude footprints and groups from VIA_PLACER DRC testing.
...
(Their children need to get tested, but not the parent objects
themselves.)
Fixes https://gitlab.com/kicad/code/kicad/issues/7569
2021-02-17 14:08:53 +00:00
cc11c8d45f
Fix change in preference panel name.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7563
2021-02-17 14:08:53 +00:00
6f9ebcfdb5
Make sure a pad has a hole before running hole test on it.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7567
2021-02-17 14:08:53 +00:00
b609c7dcd6
Kick the osx specific path helpers into PATHS
2021-02-16 23:29:26 -05:00
ba6aa3e034
Pcbnew: allow multiple selection of footprint text
...
With the selection filter and other improvements, we no longer
need to use this workaround to prevent accidental selections.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7527
2021-02-16 22:40:23 -05:00
34c2bbfe51
Don't rebuild the whole nets grid on show/hide
...
Besides being slow, this causes the scroll position
of the grid to be lost.
2021-02-16 22:31:09 -05:00
0198d5a3bd
PNS: don't lose track of pad offset when dragging footprints
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7500
2021-02-16 19:47:52 -05:00
dbbe9cdee4
Hide infobar for save when saving
2021-02-16 15:54:43 -08:00
2a7e60960a
Use standard mirror icons & terminology.
...
Also use standard group icons.
Also put both (and rotate commands) in toolbar.
Fixes https://gitlab.com/kicad/code/kicad/issues/7504
2021-02-16 21:11:36 +00:00
dd7030a28f
Keepout and graphic selection filters in footprint editor behave as per PCB editor
...
Fixes #7547
Fixes https://gitlab.com/kicad/code/kicad/issues/7545
2021-02-16 20:49:14 +00:00
fb5cd22cd0
Honor locking in cleanup ops
...
Assume that the user has locked tracks/vias for a reason and would very
much like them to remain in place, regardless of the operation
Fixes https://gitlab.com/kicad/code/kicad/issues/7562
2021-02-16 10:20:45 -08:00
015c4d5779
Don't force disallow tests to a particular layer.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7552
2021-02-16 16:24:37 +00:00
14cba9723f
Allow selection filtering in global Pcbnew edits also
2021-02-15 22:14:28 -05:00
9212197c26
Grammar
2021-02-15 15:18:13 -08:00
199ef61cdc
A footprint isn't "inside" itself.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7549
2021-02-15 22:52:12 +00:00
de7d9ef874
Fix tabs
2021-02-15 08:09:20 -08:00
cf42d692bf
Remove some dead code. A little bit of comment cleanup as well.
2021-02-15 14:13:43 +00:00
b08862e445
Fix group undo/redo bugs.
...
1) Don't remove items from group when the group is being deleted as
well. We need those pointers for undo/redo.
2) Flip the GROUP/UNGROUP undo status when undoing/redoing group and
ungroup actions.
3) Remove PCB_GROUP_T from the rebuild-netlists section. Nothing
about an item's group/ungrouped status changes its netlisting.
4) Add PCB_PAD_T to the rebuild-netlists section. It can probably
only happen in the footprint editor where we don't care about
netlisting, but it's conceptually more correct and who knows what
might change in the future....
Fixes https://gitlab.com/kicad/code/kicad/issues/7540
2021-02-15 14:13:43 +00:00
6ee5476fba
Remove misleading help text for now.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7536
2021-02-14 23:51:51 +00:00
b7672d3c92
Respece router Allow DRC Violations in free via placer.
...
Also don't check for collision on non-copper layers, but do check
for hole clearance violations.
Fixes https://gitlab.com/kicad/code/kicad/issues/7532
2021-02-14 22:32:12 +00:00
1ab17dd2e7
MSVC: don't set python home when running from build dir
...
This allows you to specify your python home via the
environment and get a working python setup when running
in-place.
2021-02-14 09:34:25 -05:00
60d4d5b846
Scale down netnames on tracks so overbars fit.
...
Also fixes a bug where the overbar ignored the color opacity.
Fixes https://gitlab.com/kicad/code/kicad/issues/7524
2021-02-14 12:15:26 +00:00
379c28340f
Pcbnew: Do not disable grid snap in copy to clipboard operation
...
This simple commit makes the Pcbnew copy to clipboard operation snap the
obtained cursor position to grid before the anchors are calculated. This
is also the way the move operation has been apparently working so far.
To be clear, this will not remove all cases where the copy reference
point is not aligned to the grid (see the linked Gitlab issue for
details about the problem). This will still occur for zone outlines that
are not axis-aligned. But such behavior has been so far also present in
the moving operation, so this may be as designed.
Fixes https://gitlab.com/kicad/code/kicad/issues/7507
2021-02-14 01:44:28 +00:00
55db1aa5f5
Fix minor Fabmaster issue
2021-02-13 16:32:39 -08:00
d98daad835
Fix updating of preset MRU when overwriting presets
...
Also fix a few minor things about deleting presets
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7473
2021-02-13 11:33:01 -05:00
00ab36092c
Fix margin layer being missing from draw order
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7159
2021-02-13 10:40:09 -05:00
8c2fe42ef0
More Undo/Redo Cleanup.
...
Don't need the reference point or container action type. Clearing this
command signatures to prevent future confusion/use
2021-02-12 11:26:48 -08:00
d244c09680
Cleanup undo/redo
...
Mirror/Rotate/etc were all just "Change" items in the undo/redo stack.
This removes the old calls
2021-02-12 10:25:14 -08:00
ab34d94f36
Add a less-intrusive validation system to board setup
...
For some kinds of issues, we want a way to point them out but
we don't need to keep the user from being able to close the
dialog. A separate Validate button lets the user check for
issues if desired, but these issues are not "fatal" and can
be ignored if the user wishes.
2021-02-11 22:19:46 -05:00
b708fd36ae
Add tooltips to netclass setup panel column headers
...
Change router tooltips to be more straightforward
2021-02-11 20:50:26 -05:00
10442b98df
Unify thickness
...
The removal of the pcbnew general section was meant for v6 but passed
the deadline. This removes the duplication of thickness. We do not
allow the thickness to be different between nominal and stackup, so
keeping separate text fields is unnecesarily confusing to users
2021-02-11 11:28:00 -08:00
20ec1fa354
Clear pythonpath and pythonhome vars on msvc like msys2 does
2021-02-10 23:58:58 -05:00
39c8922ff6
Block off setting pythonhome and pythonpath wrongly on MSVC
2021-02-10 23:54:35 -05:00
b21da9672f
Adjust py_sethome for the new path
2021-02-10 21:44:33 -05:00
1dc0ef01b3
Fix automatic wire tool in gridless mode
...
The automatic wire tool was not working in the gridless mode because the
grid snapping on/off logic present in `EE_GRID_HELPER`, based on the
value of `m_enableGrid`, was not taking into account that another check,
but for the global KiCad setting, would be performed in the `Align()`
method, which is inherited from `GRID_HELPER`.
I've modified all tests of `m_enableGrid` value to also take the global
setting into account, and moved checks for it to `Align()` method, as
it's more consistent this way.
I've also removed an override of the `Align()` method in the
`PCB_GRID_HELPER` class, as it was made redundant by my changes.
Fixes https://gitlab.com/kicad/code/kicad/issues/7402
2021-02-10 22:07:49 +00:00
05ff0fb658
Add flip board view to footprint editor menu.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7484
2021-02-10 21:55:14 +00:00
19d786852a
CADSTAR PCB Archive Loader: Fix loading of zero sized pads
...
Some CADSTAR designs use zero sized pads because CADSTAR did not allow
arbitrarily assigning pad numbers: they had to be sequential. The
workaround to this was to use zero sized pads. However this causes DRC
errors in KiCad, so we load them just in a mask layer.
2021-02-10 18:49:21 +00:00
aabe9c063f
CADSTAR PCB Archive Loader: Some fixes to design rules
...
1. Make sure to convert to KiCad units
2. There are some KiCad rules that have no CADSTAR equivalent.
Make a guess as to what an appropriate rule could be.
2021-02-10 18:49:21 +00:00
2d66abdc89
CADSTAR PCB Archive Importer: More improvements to loading of zones
...
Adds a new function Area() to SHAPE_POLY_SET
2021-02-10 18:49:21 +00:00
06c420a2a3
CADSTAR PCB Archive Importer: Improve loading of zones
...
Load fill state and guess zone priorities from fill state
2021-02-10 18:49:20 +00:00
80d8974f87
CADSTAR Archive Importer: Fix loading of non-cadstar font text sizes
...
Non-cadstar fonts use a width of 0.
2021-02-10 18:49:20 +00:00
f559e94b00
Non-Kicad Project Importers: Fix the creation of project fp libraries
...
Adds a new function to PLUGIN GetImportedCachedLibraryFootprints() that
loads the library footprints of the board design that was imported
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7449
2021-02-10 18:49:20 +00:00
297ff282f1
CADSTAR Importer: Update copyright years and remove white spaces
2021-02-10 18:49:20 +00:00
20338c92e8
Move Flip board view to a shared tool (for FP Editor).
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6687
2021-02-10 17:06:19 +00:00
4679682fe9
Don't treat success == true as "we got an outline".
...
It just means the outline wasn't malformed. It might still be
empty.
[Edit: my fix collided with JP's, so all this really is now is a
couple of slight performance improvements.]
2021-02-10 12:38:06 +00:00
05d2053ded
Put MSW bug fix back in.
2021-02-10 12:37:13 +00:00
d738c91dd7
minor fix in DIALOG_SYMBOL_PROPERTIES: make m_cbPreservePads ON the default
...
Keep Through Hole pads on external layers should be ON by default, because
such a pad does not allow soldering/unsoldering, if this option this option is OFF
Also rename dialog_enum_pads.fbp as dialog_enum_pads_base.fbp, as usual
2021-02-10 12:47:11 +01:00
5079881f3f
BuildFootprintPolygonOutlines(): fix incorrect outlines when no pad in the footprint.
...
It is used in 3D viewer to build a "board" polygonal outlines.
The polygon was empty when no pad and no item on ede cuts found (i.e. logos)
Fixes #7448
https://gitlab.com/kicad/code/kicad/issues/7448
2021-02-10 08:45:17 +01:00
872184fe8b
Revert "Bump minimum required CMake version to 3.10"
...
This reverts commit a475f45753
2021-02-09 18:46:13 -05:00
09be44a352
Use Jeff's method+font for monospace
2021-02-09 12:14:17 -08:00
505844f68c
Generalize the Ctrl-Q to all frames
...
Rather than adding our handler to each frame separately, we initialize
the Ctrl-Q quit action at the base frame to be consistent
2021-02-09 11:43:42 -08:00
65c41cff42
Another way to set fixed-width font (that works on OSX).
2021-02-09 18:46:04 +00:00
5ecef204cd
Coding policy fixes.
...
Using "this->" violates coding policy section 2.7.
2021-02-09 11:35:43 -05:00
a49a6c2f52
Refresh zone layers when copper layers change opacity.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7468
2021-02-09 12:26:46 +00:00
618e824b0f
Cleanup includes and formatting.
2021-02-09 12:26:46 +00:00
6f0424d742
Use monospace font for textboxes
...
Matches the spacing of our stroke font so the tabs are correctly
displayed in WYSIWYG
Fixes https://gitlab.com/kicad/code/kicad/issues/1807
2021-02-08 15:59:58 -08:00
e2f8b1a4b1
Interpreting wxDialog::ShowModal()'s retval as bool is never what you want.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7454
2021-02-08 17:40:57 +00:00
5aaedd86ed
Add "Limit graphic lines to 45 deg" to line drawing tool context menu
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7181
2021-02-08 16:20:38 +00:00
6272b48481
Make sure layer gets passed in to rules evaluation.
2021-02-08 14:53:49 +00:00
7aa7e3fd43
Push undo/redo blocking down a level in LengthTuner tool.
...
This way it's active only while tuning a single line, rather than
while the tool is selected.
Fixes https://gitlab.com/kicad/code/kicad/issues/7462
2021-02-08 14:15:46 +00:00
a475f45753
Bump minimum required CMake version to 3.10
...
This allows us to remove even more workarounds
2021-02-08 12:23:08 +00:00
34d7c3e31f
fp shape, ARC: fix incorrect arc end position after flipping/mirroring.
...
Add also comments in FP_SHAPE::SetAngle() to avoid a similar issue.
2021-02-08 10:11:04 +01:00
81b83a8f5b
Remove unused line width parameter
2021-02-07 17:11:05 -08:00
792904557e
Remember Parent data when routing
...
Keeps parent information such as UUID and pad removal options for
elements that are just updated in routing rather than created fresh or
fully destroyed.
Fixes https://gitlab.com/kicad/code/kicad/issues/7460
2021-02-07 17:08:43 -08:00
0ca76571ce
Add footprint zones to paste routine.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7442
2021-02-07 11:50:59 +00:00
088ff5b2bb
altiium: set fill version, which allows us to do a copper pour without a line
2021-02-06 23:58:30 +01:00
7cc28a5a02
Shrink appearance manager bitmap buttons to 16x16
...
Finish off 38cc2f106b
2021-02-06 22:51:56 +00:00
8ee6694c57
altium: Set smaller zone MinThickness by default to better account for missing design rules
2021-02-06 23:45:28 +01:00
d444ed80a5
altium: parse Regions6 to fill zone on import
2021-02-06 23:06:59 +01:00
624a231cc0
Remove unused line width option
...
You had to set the line width in the SVG export dialog in order to
change the displayed line width in the 3d viewer. The line width did
not affect the SVG export. Removing in favor of the Board design
settings for line widths
2021-02-06 06:44:53 -08:00
c2dbd28101
Simplify and harmonize symbol editor and footprint editor menus.
...
Some differences are due to difference between libraries being files
in symbol editor and directories in footprint editor, but this unifies
most of the rest.
It also dispenses with the save-to-library vs save-to-document distinction
in the GUI because it makes for too much variability in the GUI, was
implemented differently between the two editors, and isn't needed as much
anymore now that we have the highly visible infobar.
There was also an issue that the save-to-board icon occupies the same
location and has the same size/shape/colours as the Board Setup icon in
PCBNew.
Fixes https://gitlab.com/kicad/code/kicad/issues/7215
2021-02-06 14:33:16 +00:00
49a09f4c1c
Pad selectability fix.
...
Physical layer test needs to be board-visible-layers, not pad-layers.
Also cleans up the tests so that LOD factors in. (When things
disappear due to zoom level they should not be selectable.)
Fixes https://gitlab.com/kicad/code/kicad/issues/7238
2021-02-06 13:57:40 +00:00
d2213708eb
FOOTPRINT_WIZARD_FRAME: minor fixes.
...
Fixes #7435
https://gitlab.com/kicad/code/kicad/issues/7435
2021-02-06 08:10:13 +01:00
016bffc899
Remove some more unneeded atof() calls
2021-02-05 10:18:34 -08:00
5c3ee0443c
Make footprint properties accessible from python
...
Now that footprint properties inherit custom fields from schematic
they are very useful.
Setting custom properties from python will also be handy in plugins
that need to somehow mark their own objects.
2021-02-05 02:31:48 +00:00
2e67cd2db8
Fix locale issue in Fabmaster import
2021-02-04 16:32:02 -08:00
55a6013a32
Remove errant printf
2021-02-04 15:58:59 -08:00
aa0db969ca
Caching ConvexHull routine
...
Stores a cache of the convex hull similar to the bounding box. Modifies
the hull based on actions to allow complex footprint graphics without delay
Fixes https://gitlab.com/kicad/code/kicad/issues/7341
2021-02-04 15:56:52 -08:00
78ba87be8f
More explicit error message for unconnected items.
2021-02-04 22:47:37 +00:00
7b9700d871
Convert insideArea test for zones to be "any copper inside".
...
The test used to be "entire zone inside", but that didn't work when
we use it to implement "copper pour" keepout areas.
Fixes https://gitlab.com/kicad/code/kicad/issues/7420
2021-02-04 13:43:50 +00:00
0de3d48db5
typo
2021-02-04 09:00:35 +01:00
721bf82603
Handle malformed lines in dragCornerInternal
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7398
2021-02-03 20:55:22 -05:00
f7e21682ec
Update model in APPEARANCE_CONTROLS::SetObjectVisible
...
Don't make the caller remember to do so
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7411
2021-02-03 20:18:13 -05:00
da8d0472f5
Layer must be between 0 and PCB_LAYER_ID_COUNT.
2021-02-04 01:00:20 +00:00
3ac5fd6342
Get rid of wx popups when opening a read-only project
2021-02-03 19:17:32 -05:00
b314e0828c
Don't create project files unconditionally when importing boards
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7368
2021-02-03 19:17:32 -05:00
065a16b48c
Careful that we don't move the wrong end of the arc.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7409
2021-02-03 23:53:11 +00:00
90b3d0c96d
Implement TransformShapeWithClearanceToPolygon for DIMENSIONs.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6890
2021-02-03 23:34:17 +00:00
e26c912b86
Don't apply electrical clearance to non-copper zones.
...
Also removes a very old (and somewhat confusing) comment.
Fixes https://gitlab.com/kicad/code/kicad/issues/7404
2021-02-03 11:56:43 +00:00
6dee7f30fa
Whack-a-mole on another case of "module".
2021-02-03 10:53:24 +00:00
22d78a5827
FABMASTER: Handle flipped custom pads and rounded rects
...
Adds error messages for more cases and fallback for custom pads to
prevent invalid pad generation
2021-02-02 19:33:18 -08:00
c25cab0cf8
Fix typo
2021-02-03 01:55:05 +00:00
9aedeae5c3
Don't log error messages when using the clipboard
...
wxClipboard::GetData()and wxClipboard::SetData() both log a "wxLogSysError" error-level message (see for example: https://github.com/wxWidgets/wxWidgets/blob/v3.1.4/src/msw/clipbrd.cpp#L703 ). This logged message gets displayed as a messagebox to the user.
The logging can be disabled temporarily by creating a wxLogNull object. See https://docs.wxwidgets.org/3.0/classwx_log_null.html
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6956
2021-02-03 01:55:05 +00:00
46658076bd
Minor cleanup.
2021-02-02 22:55:18 +00:00
d7ddc62d7e
Fix mouse warping and dialog placement for layer switcher.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/2607
2021-02-02 17:20:01 +00:00
b8e97bb6b6
Only apply B&W printer fixes when printing.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7388
2021-02-02 15:37:30 +00:00
90519c8324
Allow pads with holes to be selected when hole is visible.
2021-02-02 14:23:29 +00:00
d261fa3792
Make sure items are removed from groups when deleted.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7387
2021-02-02 14:23:29 +00:00
c98c7cf200
Fix minor wxWidgets alerts
2021-02-02 10:01:19 +01:00
e3e03e09d0
detect_file_type(): update detection to handle last change in .kicad_mod files
...
These files can start now by "(module" or "(footprint".
2021-02-02 09:53:30 +01:00
9695717a46
Fix assert in SwapItemData
2021-02-01 19:29:58 -05:00
ee2c5bb489
Remove memory leak when importing settings for a board
2021-02-01 19:23:23 -05:00
8f4d2cf33b
Fix typo in footprint flip code.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7224
2021-02-02 00:07:29 +00:00
8571687f51
Upgrade place via tool to new DRC.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7358
2021-02-01 23:00:13 +00:00
29632e8b6f
Include footprint center as snap point
...
Only when footprint center isn't approximate the footprint origin as
well. This can help when moving/aligning THT footprints
Fixes https://gitlab.com/kicad/code/kicad/issues/7385
2021-02-01 12:03:26 -08:00
54f5a47208
Remove confusing GetFirstPad() call
...
This no longer returns the first pad, just the first by pad sort order
in output. The call is not used correctly in pcbnew, so removing to
prevent future misuse
2021-02-01 12:03:26 -08:00
23c6dbff38
Need to check track/track clearance
...
The misplaced else prevented non-track/track intersection clearances
from being reported
Fixes https://gitlab.com/kicad/code/kicad/issues/7376
2021-02-01 10:08:27 -08:00
1f27b7e7df
Don't render hole walls when no physical layers are visible.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7369
2021-02-01 17:14:30 +00:00
dc4b73fcef
Correct m_board check location in PNS_KICAD_IFACE_BASE::SyncWorld
2021-02-01 11:58:22 -05:00
9d0b16e814
bool/int type safety
2021-01-31 19:54:32 -05:00
89d3b0b670
Remove breakage of corner pinning in point editor.
...
For some reason the post-pinned local variable references were replaced
with calls to the points themselves (which are the pre-pinned values).
Fixes https://gitlab.com/kicad/code/kicad/issues/7291
2021-02-01 00:35:45 +00:00
8778599c0d
Apply same nettie hack to zone filler
...
The nettie hack is used in DRC but we also need to use it in zone filler
to allow zones to be used with netties. We limit this to the
appropriate nets in the nettie
Fixes https://gitlab.com/kicad/code/kicad/issues/7351
2021-01-31 16:16:48 -08:00
991c8fbf8f
Use the new nudge path for the footprint lib table, save global and project mru differently
2021-01-31 19:01:33 -05:00
1a3ab551cf
Cleanup
...
FindLineSegmentIntersection() was refactored in 2012 but there are a few
uses that didn't get updated. This finalizes the cleanup
Fixes https://gitlab.com/kicad/code/kicad/issues/7365
2021-01-31 15:55:52 -08:00
8567739a7a
Remove conditions from common immediate-mode keys
...
The conditions prevent use in immediate mode for common actions. While
this makes enable/disable easier in menu items, this fix is a patch
until we refactor the action framework to distinguish between immediate
mode hotkeys that should start without selections and menu items that
need a selection before running.
Fixes https://gitlab.com/kicad/code/kicad/issues/5333
2021-01-31 14:45:24 -08:00
b54e951ed8
Fix a couple of checks in Fabmaster
2021-01-31 14:12:40 -08:00
8f21034254
Fix invalid windows macro
...
Missing one underscore at the end
2021-01-31 16:15:50 -05:00
051621a2ca
Use M_SQRT1_2 in place of the number
2021-01-31 15:47:23 -05:00
3d45668354
Fix typo in TRACK::GetEndY
2021-01-31 15:43:12 -05:00
21fe8542df
Remove shadowing of identical base m_parser member
2021-01-31 12:56:27 -05:00
abf0a46dce
Refactor PICKER_TOOL and push up snapping disable functionality
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7348
2021-01-31 09:50:41 -05:00
a45b86d2ba
Fix Coverity warning
2021-01-31 09:50:41 -05:00
a868fb97b6
Preserve Uuids when editing board footprints.
...
One way to do this would have been to keep the Uuids in the editor
copy. However, this opens us up to errors if we forget a Save As or
export path and end up writing the Uuids out somewhere else.
In the end, it felt safer to store a map of the original Uuids and
restore them if we happen to save the editor footprint back to the
board.
Fixes https://gitlab.com/kicad/code/kicad/issues/7312
2021-01-31 14:09:59 +00:00
70e6d0e79f
altium: use those new fancy user definable layers and import the name from Altium
2021-01-31 11:15:08 +01:00
56ea55ae9c
Make sure that NPTH pads still get handled in copper clearance checker.
...
... because that's where we do hole-to-copper clearance testing.
Also augments the Clearance Resolution reporter to report on said
hole clearances.
And changes the interpretation of HOLE_CLEARANCE_CONSTRAINT to include
local pad clearance overrides.
Fixes https://gitlab.com/kicad/code/kicad/issues/7325
2021-01-31 00:33:35 +00:00
6a9e1ecf9e
altium: Center board after import
2021-01-30 17:43:02 +01:00
41234a8373
Implement more precise annotation-required messages.
...
Also moves the message to an infobar so it's more noticeable.
Fixes https://gitlab.com/kicad/code/kicad/issues/7332
2021-01-30 16:31:27 +00:00
a235103e48
Redo pad & via painting (again).
...
New strategy isolates all draw/don't draw decisions to the ViewGetLOD
routines, and all dimmed/not dimmed to PCB_RENDER_SETTINGS::GetColor.
The actual drawing in PCB_PAINTER is more-or-less conditon free.
Also adds new layers for pad and via hole walls so that they can be
controlled for high-contrast mode.
Also changes the drawing paradigm so that the pads are drawn even when
not on the high contrast layer, just in low contrast. The hole wall
is drawn in high contrast. This actually makes things clearer to the
user (although to be honest was done to keep from having to re-render
pads when the high contrast layer changes since we have two separate
layers now that we can adjut colours on).
Fixes https://gitlab.com/kicad/code/kicad/issues/7328
2021-01-30 16:31:27 +00:00
488a5b7567
Draw via holes in high contrast when they cross a high contrast layer.
2021-01-30 16:31:27 +00:00
6b685dfb3f
Fix the knockout conditions
...
We need to knock out thermal clearance for same net pads but this
doesn't need to be placed in the regular clearance area (probably).
Fixes https://gitlab.com/kicad/code/kicad/issues/7321
Fixes https://gitlab.com/kicad/code/kicad/issues/7340
2021-01-30 08:15:00 -08:00
73886aecb1
Ensure partially triangulated polys are not valid
...
Moves rule area triangulation outside of layer iterator and keeps the
triangulation_valid flag false until the triangulation has been
completed.
Fixes https://gitlab.com/kicad/code/kicad/issues/7032
2021-01-29 16:33:57 -08:00
386ead30c5
All circle and arc tools to select all at first
...
Non-layer elements can be logical centers for the circle and arc tools.
We allow the non-layer to snap for the center points and revert to only
on-layer elements after
Fixes https://gitlab.com/kicad/code/kicad/issues/7327
2021-01-29 10:14:44 -08:00
553166f932
Handle ARC bbox in tracks
...
Need to handle arcs separately to ensure we get the full bounding box
Fixes https://gitlab.com/kicad/code/kicad/issues/7318
2021-01-29 09:07:23 -08:00
30ba3aa240
Get python loading the new "user scripting" paths
2021-01-28 23:45:53 -05:00
43fd416d13
Flip the footprint new library flow to prompt global or project first
2021-01-28 20:15:44 -05:00
b5e9a949bc
Selection: skip sloppiness pruning if invalid
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7320
2021-01-28 19:51:29 -05:00
74a5db64c2
Update pad netnames (and numbers) to the new visibility architecture.
2021-01-28 23:31:38 +00:00
21bec6c016
Comment.
2021-01-28 23:31:38 +00:00
6983bcd55b
Push addition of shape width down into computeArcBBox.
...
Also improves performance by calling GetBoundingBox only once (this
is not always an inexpensive routine for some items, such as
polygons).
2021-01-28 22:29:28 +00:00
1733a23ac7
Take width into viewBBox account
...
Don't let objects disappear until their full extend has been removed
from view.
Fixes https://gitlab.com/kicad/code/kicad/issues/7318
2021-01-28 14:20:13 -08:00
714430fefa
Flash pads when connected by zone
...
Zone connections (even half-connections) should trigger the connected
logic in flashPads. This removes the double-standard for painting pads
and imposes thermal standoff based on the net connection to the pad if
it shares a net, not just if connected
2021-01-28 13:21:22 -08:00
1a7b7e84c6
Use consistent terminology for component placement files.
...
CHANGED footprint positions files -> component placement files.
Not all footprints get placed, so component is a more neutral word.
Use of "placement" instead of "positions" removes the double-plural
that makes footprint positions files such a mouth-full.
Fixes https://gitlab.com/kicad/code/kicad/issues/7097
2021-01-28 19:24:55 +00:00
636ae012ed
Overhaul the pad drawing special cases yet again.
...
New strategy is to draw the hole wall cylinder if the pad (or via)
isn't flashed on a particular layer. This is (1) more correct,
(2) keeps pads which aren't flashed on any layer from disappearing,
and (3) allows us to remove a bunch of the other special cases.
Or at least I think it does. The proof will be in the (lack of)
follow-on bug reports....
Also fixes a bug where via annular rings weren't highlighted in
high contrast mode.
Fixes https://gitlab.com/kicad/code/kicad/issues/7279
2021-01-28 17:02:42 +00:00
2ef00e9de4
Rebuild ratsnest when importing netlist
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7287
2021-01-27 17:57:00 -08:00
89a72df0b1
Fix a few FABMASTER issues
...
- Custom pads now properly supported with offset/rotation
- Fix missing pads from alternate layers
Fixes https://gitlab.com/kicad/code/kicad/issues/7299
2021-01-27 17:50:14 -08:00
beb50c529e
Reorganize the CMake folder to separate build and configure steps
...
The BuildSteps folder now contains the CMake scripts that are
called during the build process as individual stages, while
the root CMakeModules directory contains the CMake files used
during the configuration phase.
2021-01-28 00:24:22 +00:00
2807a37fc0
Create a stock scripting path helper
2021-01-27 19:12:18 -05:00
e6dd95e83a
Create a default user projects folder
2021-01-27 19:12:18 -05:00
28c6967dbc
Start trying to shuffle around path management
2021-01-27 19:12:18 -05:00
6a39b81647
Fix the last of broken Doxygen comment specifiers.
2021-01-27 17:39:44 -05:00
3e42ba18a9
Show dragging tools in context selection menu for components
...
Show the dragging tools in the context selection menu when a single
component is selected. Prevent the dragging tools from appearing when
more than one object is selected, as they will not activate anyway.
Fixes https://gitlab.com/kicad/code/kicad/issues/7258
2021-01-27 19:55:42 +00:00
06a0094597
Minor improvements to layer highlighting.
2021-01-27 14:52:22 +00:00
bb79eb0e45
Fix typo causing no netnames in SPECCTRA export
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7298
2021-01-26 22:04:45 -05:00
1e030655cd
Always create project when doing a Save As on a board with a project
2021-01-26 21:58:17 -05:00
bea310569b
Fix parsing of track/via user sizes from legacy boards
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6134
2021-01-26 21:51:36 -05:00
30f3a7d124
Rework high contrast for pads/vias slightly
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6923
2021-01-26 21:02:11 -05:00
79f94c096e
Rename legacy selection filter action to avoid confusion
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7290
2021-01-26 18:15:36 -05:00
aefc107d86
Fix button sizing
2021-01-26 13:42:02 -08:00
9a51a75403
Confirm when cancelling a changed custom rule
2021-01-26 08:18:38 -08:00
1e9639e89c
Save pintype alongside pinfunction (in pads).
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7283
2021-01-26 15:28:48 +00:00
0e7c18119e
Make sure pads are unlocked when editing footprint from board.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7274
2021-01-26 15:28:48 +00:00
2e58826338
Minor fix: remove an unwanted font setting from panel_setup_constraints_base.fbp
...
that cannot be removed using wxFormBuilder due to a bug in wxFormBuilder.
2021-01-26 14:03:12 +01:00
5a5f96bd9f
More consistent naming.
2021-01-26 11:41:47 +00:00
b165ae6519
Fix note formatting issues.
...
Also removes the "tip" icon which doesn't work on OSX and isn't as
important as the graphics which actually convey information. Replaced
with the more generic "Note: " string.
Fixes https://gitlab.com/kicad/code/kicad/issues/7281
2021-01-26 11:29:30 +00:00
7d6c1c5ee6
Improve comments.
2021-01-26 10:56:19 +00:00
dca7e44455
Fix a missed Module -> Footprint.
2021-01-26 10:56:19 +00:00
b96bcc86b1
Don't restrict start item to same layer if snapping is enabled
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7276
2021-01-25 21:19:26 -05:00
96af236493
Code cleanup: remove include wx.h from pcb_plot_params.h.
...
including wx.h is useless for this file, and include wx.h in a lot of other files.
Include wx.h must be made only when needed in a given file, because on Windows
it include some headers that frequently create collision with kicad declarations
2021-01-25 16:18:46 +01:00
d933a0a863
Use the pencil for Properties in Pcbnew
2021-01-25 14:21:23 +00:00
eba09a59e9
Remove inappropriate icon
2021-01-25 14:21:22 +00:00
09eb4b35c6
Make sure footprint edges get checked.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7267
2021-01-25 13:20:16 +00:00
d40fe127aa
Update pad locked status when adding footprints from schematic.
...
Also fixes some latent bugs with not updating the local ratsnest
visibility in other places, and the netcode in update PCB from schematic.
Fixes https://gitlab.com/kicad/code/kicad/issues/7202
2021-01-25 01:20:36 +00:00
5a9c0a9b5a
Quiet a few coverity warnings
2021-01-24 14:53:18 -08:00
47d5900600
Fix build warnings
2021-01-24 11:37:48 -08:00
04cc64c008
Restore the old reference after rotation or flip instead of clearing
...
After a rotation or flip the reference point has to be restored to the
previous value to prevent the dragged item from warping to the cursor.
Before this change, the reference point was only cleared, causing odd
behavior when a rotation or flip was performed.
Fixes https://gitlab.com/kicad/code/kicad/issues/7112
2021-01-24 18:56:46 +00:00
f353fc448b
Fix edge cases in EDIT_TOOL::DragArcTrack
2021-01-24 16:41:11 +00:00
99d203feae
Clarify CIRCLE::ConstructFromTanTanPt
...
Remove unused bool aAlternateSolution and add doxygen comments
2021-01-24 16:41:11 +00:00
48823c0723
Formatting fixes and fix qa_kimath following rebase
2021-01-24 16:41:10 +00:00
6e7ae93cc8
EDIT_TOOL::DragArcTrack Fix incorrect undo history when items are deleted
...
Need to make sure we only apply one COMMIT operation per object before calling COMMIT::Push() or COMMIT::Revert()
2021-01-24 16:41:10 +00:00
2b5c1bae97
CHANGED: Dragging a curved track starts an interactive resizing of it, keeping start an end points tangent
2021-01-24 16:41:10 +00:00
25956152c6
Scan actual nets; not assumed nets.
...
Specctra exporter should not assume that PCB nets are numbered
sequentially without any holes.
Fixes https://gitlab.com/kicad/code/kicad/issues/7249
2021-01-23 22:55:03 +00:00
d5d9372839
Don't cancel dialog when esc-ing out of autocomplete.
2021-01-23 22:55:03 +00:00
15cc368918
Gerber plotter: prepare optimization of aperture macros type free polygons.
...
They are used for chamfered round rect pads, and can be used for custom shaped pads.
No actual change currently, but the shape rotation of custom pads and chamfered rr pads
can be now used in gerber plots.
2021-01-23 21:15:27 +01:00
d8c7c8f700
Evaluate rules when fetching zone edge clearance.
2021-01-23 17:04:44 +00:00
2d8cac658e
Allow negative clearances to signal supression of DRC test.
2021-01-23 00:10:01 +00:00
0ba0160da9
Add a PT_NIC pin electrical type and a netlist token for SCH_NO_CONNECT.
...
ADDED a new pin electrical type "free" for internally unconnected pins.
CHANGED the "unconnected" pin electrical type is now represented by
"no_connect" in files and netlists. (The legacy syntax is also accepted
in files.)
2021-01-23 00:10:01 +00:00
f5e35af1a5
Transmit pin electrical types through to pads.
2021-01-23 00:10:01 +00:00
9ac807bdd2
Freeze implicit footprint file version at last before explicit.
...
We have been writing footprint versions for a while now, but we were
still interpreting the lack of a version as "current". This changes
lack of a version to mean "last format before we started writing out
versions".
Fixes https://gitlab.com/kicad/code/kicad/issues/7143
2021-01-23 00:10:01 +00:00
cbff706916
Update the .fpb file to be able to open it with wxFormBuilder 3.9, used by Kicad
2021-01-21 20:28:05 +01:00
3fcd0860c1
Make 'E' go straight to Custom Track Width dialog.
...
Also fixes some mouse capture issues.
Fixes https://gitlab.com/kicad/code/kicad/issues/7198
2021-01-20 18:19:55 +00:00
07d4a28024
Improvements to pcbnew action plugins settings panel
...
1. Add open plugins directory button (same as in tools menu)
2. Add show plugin errors button to help debug issues
2021-01-20 09:09:53 +00:00
74aa081b8a
Don't add board-only footprints to the netlist (fixes back-annotation issue)
2021-01-20 00:37:38 +00:00
360953ba98
"comp" -> "symbol".
2021-01-19 23:50:40 +00:00
0ded846130
Go back to previous arc midpoint editing routine.
...
It avoids erratic behaviour near the chord or end-points.
Fixes https://gitlab.com/kicad/code/kicad/issues/7135
2021-01-19 23:50:40 +00:00
80dbc24326
Icons: remove superfluous icon
...
Remove icons where menu text gives context
2021-01-19 22:57:25 +00:00
ef2aa8a730
FP Editor: remember to update appearance manager
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6926
2021-01-19 20:24:16 +00:00
060635b14c
fabmaster: Fix graphic handling in geometry section
2021-01-19 12:16:40 -08:00
35978adef9
Don't run dimension updates while parsing files.
...
They mess up the geometry when only partial values are provided.
Fixes https://gitlab.com/kicad/code/kicad/issues/7177
2021-01-19 16:09:44 +00:00
25ff0fa662
Fix typo in unit label assignment and some minor layout improvements.
2021-01-19 16:09:44 +00:00
e9dc1824d6
Minor improvements to layout.
2021-01-19 16:09:44 +00:00
06dec36625
Improve layout and terminology in PCBNew/FPEditor edit settings.
2021-01-19 13:16:26 +00:00
1ac47c2ac6
Fix misleading tooltip.
2021-01-19 11:05:25 +00:00
0a2a3c9903
Fix Coverity-discovered typo.
2021-01-19 10:57:07 +00:00
330d717c69
Fix typo
2021-01-18 21:50:26 -05:00
7461b96dea
Hide the selection tool submenu in the FP Editor
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7164
2021-01-19 00:30:44 +00:00
12fe44d4b3
Snap arc center *by* the grid, not *to* the grid.
...
Also fixes a bug with editing an arc endpoint because the cursor pos
was being forced before the arc constraints stuff had been run (in
updateItem()).
2021-01-19 00:26:31 +00:00
b8dfcb34c4
Revert "Use less-sophisticated arc editing math."
...
This reverts commit 3b424d3868
2021-01-18 12:44:27 -08:00
44655b98de
Initialize variables properly
2021-01-18 18:35:10 +00:00
d030d1667b
Fix improper string creation in fabmaster importer
2021-01-18 18:35:10 +00:00
1e33928b96
Fix issues with zone filling connectivity locking
...
Two issues found with the locking system used to prevent access to
stale connectivity data during the zone fill process:
1) a std::mutex has undefined behavior if you try to use it to guard
against access from the same thread. Because of the use of wx event
loops (and coroutines) it is entirely possible, and in some situations
inevitable, that the same thread will try to redraw the ratsnest in the
middle of zone refilling.
2) The mutex was only guarding the ZONE_FILLER::Fill method, but the callers
of that method also do connectivity updates as part of the COMMIT::Push.
Redrawing the ratsnest after the Fill but before the Push will result in
stale connectivity pointers to zone filled areas.
Fixed (1) by switching to a trivial spinlock implementation. Spinlocks would
generally not be desirable if the contention for the connectivity data crossed
thread boundaries, but at the moment I believe it's guaranteed that the reads
and writes to connectivity that are guarded by this lock happen from the main
UI thread. The writes are also quite rare compared to reads, and reads are
generally fast, so I'm not really worried about the UI thread spinning for any
real amount of time.
Fixed (2) by moving the locking location up to the call sites of
ZONE_FILLER::Fill.
This issue was quite difficult to reproduce, but I found a fairly reliable way:
It only happens (for me) on Windows, MSYS2 build, with wxWidgets 3.0
It also only happens if I restrict PcbNew to use 2 CPU cores.
With those conditions, I can reproduce the issue described in #6471 by
repeatedly editing a zone properties and changing its net. The crash is
especially easy to trigger if you press some keys (such as 'e' for edit)
while the progress dialog is displayed. It's easiest to do this in a debug
build as the slower KiCad is running, the bigger the window is to trigger this
bug.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6471
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7048
2021-01-18 13:22:12 -05:00
26bc29808a
Clean up Text Properties dialog.
...
It's no longer used for dimensions so doesn't need the line thickness
controls.
The spacing was a bit wonky.
Changed to disabling rather than hiding visibility checkbox. The less
the GUI moves around the better.
2021-01-18 15:20:15 +00:00
4f399d4304
One more attempt to fix flipping geometry.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/4480
2021-01-18 15:20:15 +00:00
479487ceb1
Tidy up context menus a bit
...
Try and put the common actions in the same places
2021-01-17 22:42:03 +00:00
6bb9aeab4b
Position relative: store discarded pad for use as the selection anchor
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6996
2021-01-17 14:25:52 -05:00
f1221a9ca3
Resolve text variables in title blocks for outputing to netlist.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7153
2021-01-17 16:24:22 +00:00
1754504234
Fabmaster: fix MSVC build
...
std::map is not move-constructable on MSVC because
it is not declared noexcept (and is not required to be
by the standard)
This means that a struct containing graphic_element
cannot be inserted into a vector with move semantics without
compile errors. However, wrapping it in a unique_ptr
works.
2021-01-17 10:23:31 -05:00
68efdb2fff
Push shared parts of GRID_HELPERs into common.
2021-01-16 23:18:10 +00:00
950db6ff9c
pcbnew: Add Fabmaster import
...
Allows importing ASCII design output from OrCAD designs
2021-01-16 14:28:33 -08:00
3b424d3868
Use less-sophisticated arc editing math.
...
While it doesn't do the tangent retention that the old version did,
this one I can at least make work.
Fixes https://gitlab.com/kicad/code/kicad/issues/7135
2021-01-16 20:46:14 +00:00
00918c68f5
Don't do clever snapping logic when drawing a circle
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7131
2021-01-16 08:39:20 +00:00
38455c25ef
Bring back consideration of world scale to PcbNew snapping
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7125
2021-01-15 12:29:47 -05:00
08d595c9bf
Move title block fields to global availability in PCBNew.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7118
2021-01-15 15:41:18 +00:00
7dc2ca93cd
Make sure we mark board-only-footprint nets as current.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6871
2021-01-15 12:46:48 +00:00
6cc39d8011
Don't allow moving locked pads with Position Relative dialog
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6996
2021-01-14 22:14:00 -05:00
0b7fc0e2d9
Update local ratsnest state when toggling appearance control
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7035
2021-01-14 22:03:23 -05:00
36508807e7
Give the pad placement tool a context menu.
...
ADDED: allow pad properties to be edited while placing pads.
Fixes https://gitlab.com/kicad/code/kicad/issues/6953
2021-01-15 00:52:03 +00:00
965482bd7f
Improve some tooltips.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7116
2021-01-14 22:35:32 +00:00
9f24ea0bb7
altium: fix non-copper pads. Roundrect pads were not filled and SetLocalCoord() does not transform polygons into the local coordinates, which is unexpected.
2021-01-14 22:21:05 +01:00
54cf67dad2
Pcbnew, drill map: fix incorrect position of texts for small boards.
...
Fixes #7111
https://gitlab.com/kicad/code/kicad/issues/7111
2021-01-14 18:52:04 +01:00
0129c7ae52
Notify appearance panel when net is (un)hidden by board inspection tool
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7039
2021-01-14 17:22:41 +00:00
02ccd5fbdb
Make sure properties commands don't go to other tools during routing.
...
Brings up the track widths (or diff pairs) context menu instead,
which seems to be the closest parallel.
Fixes https://gitlab.com/kicad/code/kicad/issues/7099
2021-01-14 15:19:09 +00:00
3e920c665f
Special case via area generation.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7105
2021-01-14 12:48:44 +00:00
f0b11896da
Clip the first segment in leaders
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6548
2021-01-14 00:10:41 +00:00
13a4717aed
Add center handles to rectangle edits
...
Allows changing a single dimension at a time. Matching the polygon edit
tool.
Fixes https://gitlab.com/kicad/code/kicad/issues/7085
2021-01-13 14:04:21 -08:00
ffdff21f45
Use a sloppier hittest for the collector as well as the actual hittest.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7079
2021-01-13 21:22:24 +00:00
e3e9bfc1b8
Fix compile error
2021-01-13 13:21:27 -08:00
605dcfbedf
Fix Windows script location
...
Windows has arbitrary installation locations, so reference relative to
the executable
2021-01-13 13:11:26 -08:00
b57ad4b2f9
Correct SWIG path
...
Don't offset from executable, this is an absolute path
Fixes https://gitlab.com/kicad/code/kicad/issues/7089
2021-01-13 12:34:04 -08:00
da4b269783
Make sure pad local clearances get in to m_worstClearance.
2021-01-13 12:37:20 +00:00
0bce280424
Make sure design rules get recompiled after netclass changes.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7082
2021-01-13 12:37:20 +00:00
d2d4ffe6d0
Dismiss infobar if it's dismissable on board save
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7071
2021-01-12 23:24:13 -05:00
5931a39c0f
Fix layer preset overwriting ratsnest settings
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6975
2021-01-13 01:22:30 +00:00
6ed2a831d8
Don't override the router tool with drag actions
...
Before processing the select tool actions, we check if the router is
currently active and if it is, pass the event for processing in other
tools
Fixes https://gitlab.com/kicad/code/kicad/issues/7021
2021-01-12 15:44:20 -08:00
ad97fabfd3
Add missing const to Matches
2021-01-12 20:51:32 +00:00
dc02ec9758
Remove a few const_cast
2021-01-12 20:51:31 +00:00
07635d2fc7
Minor adjustments
2021-01-12 20:51:31 +00:00
ac94d72d2d
Add more const specifiers
2021-01-12 20:51:31 +00:00
ec0af24f13
Make wxFindReplaceData argument const
2021-01-12 20:51:31 +00:00
76cc7b98a7
Fp editor, DIALOG_PAD_PROPERTIES: do not disable posX and posY settings.
...
When a pad is locked, posX and posY settings in DIALOG_PAD_PROPERTIES must
be locked only for the board editor, not in the fp editor.
2021-01-12 20:33:52 +01:00
2cb8dff650
Use KICAD_DATA for data path lookup in scripting
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7036
2021-01-12 08:22:17 -08:00
cd2c46e5c9
Make "... file is read only." warnings translatable.
2021-01-12 14:33:35 +00:00
beab68db13
Fix bone-headed error in rules optimization.
2021-01-12 12:46:51 +00:00
d4c36230d2
Pcbnew, Graphic items: show the locked status in msg panel and dialog properties.
2021-01-12 10:00:21 +01:00
01181ccb2f
Make sure project is unlinked before deleting it
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7038
2021-01-11 22:17:13 -05:00
a00b9cc821
Icons: general tweaks and pixel alignment
...
+ minor rename
+ fix missing bitmap in DRC panel
2021-01-11 23:31:25 +00:00
dc83cb7a41
Icons: general tweaks and pixel alignment
...
+ remove some unused icons
2021-01-11 23:31:25 +00:00
32f7f30958
Icons: remove where they don't make sense
...
Also avoid icon reuse
2021-01-11 23:31:25 +00:00
8fba0c257b
Icons: remove more inconsistencies around Select
...
Missed from 5d9b2d3fea
2021-01-11 23:31:24 +00:00
740df93808
Don't dereference board groups in fp editor
...
The Footprint editor group resolution should stop at the footprint level
to avoid breaking into groups that cannot be accessed.
Fixes https://gitlab.com/kicad/code/kicad/issues/7049
2021-01-11 14:58:33 -08:00
63e2046eb0
Performance improvements for DRC rules.
2021-01-11 22:09:36 +00:00
50889a9ed6
Promote mouse drag settings to full enums.
2021-01-11 22:09:36 +00:00
c09dc5abdd
Prevent locking items in footprint editor
...
Adding footprints to the board now has a preference for whether we want
pads locked or unlocked by default
2021-01-11 11:23:26 -08:00
1b755bbc37
Fix issues in ConvertOutlineToPolygon() related to S_POLYGON PCV_SHAPE
...
Fixes #7046
https://gitlab.com/kicad/code/kicad/issues/7046
2021-01-11 17:05:44 +01:00
a4d417f5c0
Get rid of "drill" terminology when talking about finish hole size.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7044
2021-01-11 13:49:43 +00:00
493a784b62
Fix Pcbnew search "not found" prompt not displayed
...
Before this, "Searching..." prompt will not go away if nothing was found
in a search session. A bug I noticed while working on !611 . After this
fix, "foo not found" will be displayed when Pcbnew cannot find the
given text.
2021-01-11 13:48:20 +00:00
dd328d230b
Make Pcbnew search about zone names, fixes #6951
...
I put zones in "other text items" category of searching as I thought it
would be the appropriate one.
Fixes https://gitlab.com/kicad/code/kicad/issues/6951
2021-01-11 13:48:20 +00:00
1eee72ec65
Fix library tree behavior when duplicate project table entry is disabled.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/5438
2021-01-11 07:46:07 -05:00
6c648df4c6
Support 3 drag vs. select options, and unifiy with other drag prefs.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/5493
2021-01-11 11:50:14 +00:00
7134ff2da6
Try a different arrangement of Board Setup pages.
2021-01-11 11:50:14 +00:00
9ce6c2be80
Group global editors under tools menu.
...
Also improves some terminology in Remove Unused Pads.
2021-01-11 11:50:14 +00:00
8ee324b1a9
Add bezier output to VRML
2021-01-10 11:28:15 -08:00
067b94c410
DRC: Fix a incorrect message and marker position when testing dangling vias.
...
Commit 6ffb721
2021-01-10 10:21:24 +01:00
828ecb76aa
Remove polyline 3d check added by previous fixes
...
Fix #7030
2021-01-09 18:56:35 -05:00
4f6134b60d
Check for CCW polys
...
Use rectangles for 4-sided polygons that are rectangular regardless if
they are CW or CCW oriented
2021-01-09 13:05:58 -08:00
8036303f8f
Add margin to both sides to avoid drawing 0-poly
...
We cannot draw degenerate polygons, so we need to test for 0-size shapes
especially after scaling the mask. The mask adjustment is from both
sides however, so it needs to be doubled.
Fixes https://gitlab.com/kicad/code/kicad/issues/7020
2021-01-09 13:05:58 -08:00
ed7b3373d1
Disentangle copper- and board-edge-clearances in Clearance Resolution...
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6983
2021-01-09 16:44:03 +00:00
08b93bd5ba
FOOTPRINT::GetBoundingHull(): avoid returning a empty hull SHAPE_POLY_SET,
...
when a footprint contains only texts.
empty SHAPE_POLY_SET creates most of time issues (crashes for instance) when
containing no data.
Ensure the returned SHAPE_POLY_SET contains a minimal hull (a 0.04 mm square)
Fixes #7026
https://gitlab.com/kicad/code/kicad/issues/7026
2021-01-09 16:53:32 +01:00
daae68a6b8
French translation update.
...
Fix also a typo in 2 I18n strings.
2021-01-09 14:54:43 +01:00
5ae6f93af8
A groups children may also have children.
...
For instance, it could be a nested group or a footprint.
Fixes https://gitlab.com/kicad/code/kicad/issues/7025
2021-01-09 13:47:24 +00:00
78dcfb2392
Honour locks inside groups.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6841
2021-01-09 13:47:24 +00:00
7716f20a5b
Disentagle board edges from graphics in global delete.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7024
2021-01-09 13:47:24 +00:00
e4f29d358c
Formatting.
2021-01-09 13:47:24 +00:00
cf2dd0bd38
Fix edit_tool pad handling
...
Check for footprint editor
Promote pad edits to footprint edits iff
- Pad is locked
- Footprint is not
Otherwise, handle the pad normally and prompt for locked items if found
2021-01-08 19:46:14 -08:00
1c9d8a9f4c
Don't warn on locked conversion
2021-01-08 16:49:47 -08:00
51f02ecc51
Fix alignment tool with locked footprints
2021-01-08 13:58:26 -08:00
721155165d
Don't move locked footprint if pads are locked
2021-01-08 13:58:26 -08:00
d6448ce6b4
Expose settings manager to python
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6989
2021-01-08 16:47:20 -05:00
d0af4e9f9d
Save a cancel value when asked if it's not being used to cancel.
...
Many, many KIDIALOGs use OK/Cancel and then rename both buttons to
confirm or deny some action. In those cases we *do* want to store
the deny actions if they check "Do Not Show Again".
Fixes https://gitlab.com/kicad/code/kicad/issues/6979
2021-01-08 21:32:19 +00:00
8fffb75347
Allow custom pads with 0-sized anchor pads.
...
(Surprisingly we used to in 5.1, so this is a regression.)
Also had to go back to the nag dialog as on a small screen the infobar
comes up behind the dialog. A lot of the errors have also been turned
into warnings, so the overall effect should still be to reduce nagging.
Fixes https://gitlab.com/kicad/code/kicad/issues/6992
2021-01-08 20:43:02 +00:00
3467e643e5
Move pad locking from footprint to pads.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6997
2021-01-08 20:43:02 +00:00
6ffb72159a
Remove vias if they only connect to single layer
...
A via takes up zone space on additional layers, so if we are not
connecting to those layers, then we should remove it.
Fixes https://gitlab.com/kicad/code/kicad/issues/7004
2021-01-08 09:39:43 -08:00
1e96374715
Consider tracks and vias together
...
Dangling tracks and vias affect each other and need to be considered at
the same time in order to fully remove the dangling segments
2021-01-08 09:35:58 -08:00
93d203aef7
Fix a I18n issue: a string flagged as translatable cannot be empty.
2021-01-08 18:16:00 +01:00
9424d66d22
Move footprint when selecting locked pad
...
Prompting to unlock is obtrusive and blocks the common action of
dragging from a pad to align footprints. The less common action of
editing pads in layout can be accomplished after unlocking the pads
Fixes https://gitlab.com/kicad/code/kicad/issues/6997
2021-01-07 19:46:06 -08:00
24435df6b0
Don't update 3D view on cursor movement
...
Our rendering pipeline is not set up for this kind of speed,
and this is a blocking operation at the moment.
Note that we will get an update at the end of the move
because OnModify does it.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6819
2021-01-07 20:43:14 -05:00
61bddd0928
LAYER_PADS_TH is not a dependent layer
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6999
2021-01-07 20:12:31 -05:00
111fa99f9f
PNS: Use last-segment posture optimization always
...
Also when auto-posture is enabled, don't flutter
until area threshold has been met.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6935
2021-01-07 20:12:31 -05:00
3fd128a75b
Performance enhancements.
2021-01-08 00:46:55 +00:00
5c22ffe422
Don't try to load a nonexistent layer setting
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6998
2021-01-07 19:09:54 -05:00
bf332b3189
Fix minor compil warnings
2021-01-07 20:55:24 +01:00
01fe3b91e9
Implement locking for graphic shapes.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6972
2021-01-07 17:39:18 +00:00
6ca9a42251
Removes 3 other instances of a potential encoding problem
...
Signed-off-by: hoijui <hoijui.quaero@gmail.com>
2021-01-07 17:36:49 +00:00
8c8516b7b1
Remove formbuild URL from hypertext links.
...
Also adds a tooltip.
Fixes https://gitlab.com/kicad/code/kicad/issues/6982
2021-01-07 15:12:19 +00:00
e41c06304b
Don't show a leading ratline to a NPTH.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6960
2021-01-07 12:25:04 +00:00
f702b64b8d
Minor improvements to formatting & SNR.
2021-01-07 12:25:04 +00:00
84dd78e01d
Fix the install location for vcpkg built python modules
2021-01-07 00:08:11 -05:00
52f822dedb
Remember autotrack width setting
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6971
2021-01-06 20:11:32 -08:00
0234b7278a
PNS: Make DIRECTION_45 North be up everywhere
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6935
2021-01-06 21:47:06 -05:00
ad8136541b
Improve layout and terminology of Remove Unused Pads.
...
Also removes the limitation of removing outside layers for pads.
It's already supported in Pad Properties so it's odd to not support
it here.
2021-01-07 01:27:12 +00:00
f372c8025b
Better sizing for some conditional dialogs.
...
These dialogs don't have growable features but do have conditional
features, so the size is better adjusted automatically by the code
then by the user.
2021-01-07 01:27:12 +00:00
43e7b1ab6e
Set icons for front/back assembly layers
2021-01-06 13:49:00 -08:00
c0f940438a
Clarify Flip action
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6954
2021-01-06 13:02:44 -08:00
2a088e5c7b
Add conversion of circles to zones and enable in footprint editor.
...
Also rule areas, of course.
Fixes https://gitlab.com/kicad/code/kicad/issues/6966
2021-01-06 17:21:49 +00:00
70967bfebd
Hierarchical menu parents don't get ...'s.
...
Also moves the Convert menu up a level. Nested hierarchical menus
should be avoided whenever possible.
2021-01-06 17:21:49 +00:00
8aeaaf99ef
Disable net selector for non-free vias.
...
Also moves the checkbox up so this relationship is clearer.
Fixes https://gitlab.com/kicad/code/kicad/issues/6967
2021-01-06 15:49:12 +00:00
366c7096b3
More double- and triple-pointer erradication.
2021-01-06 14:37:38 +00:00
426536c381
Don't show empty-net synthetic net in Net Inspector.
...
Also fixes an assert when deleting a net inspector row with no
parent row.
Fixes https://gitlab.com/kicad/code/kicad/issues/6962
2021-01-06 14:27:02 +00:00
46c4727783
Make MSVC happy again
2021-01-05 20:56:37 -05:00
2a24886d47
Icons: remove more duplicates
2021-01-06 00:35:20 +00:00
6fd718fbd8
Icons: replace old with new
2021-01-06 00:35:20 +00:00
5d9b2d3fea
Icons: new filter icon
...
+ remove icons where they don't make sense.
2021-01-06 00:35:20 +00:00
54724096ea
Icons: consistency between Eeschema and Pcbnew
2021-01-06 00:35:20 +00:00
Jon Evans
Thomas Pointhuber
Jeff Young
Jonathan Haas
Mikolaj Wielgus
Seth Hillbrand
Ian McInerney
Roberto Fernandez Bautista
david-beinder
Carsten Schoenert
jean-pierre charras
Wayne Stambaugh
Konstantin Baranovskiy
firebladed
qu1ck
Marek Roszko
Jean-Samuel Reynaud
pgvoorhees
Fabien-B
Fabien Corona
Dominik Wernberger
WhiteChairFromIkea
Tomasz Wlostowski
Zoltan Gyarmati
PJM
James Jackson
Simon Richter
Michael Kavanagh
Barabas Raffai
RigoLigoRLC
hoijui