dc4b73fcef
Correct m_board check location in PNS_KICAD_IFACE_BASE::SyncWorld
2021-02-01 11:58:22 -05:00
9d0b16e814
bool/int type safety
2021-01-31 19:54:32 -05:00
89d3b0b670
Remove breakage of corner pinning in point editor.
...
For some reason the post-pinned local variable references were replaced
with calls to the points themselves (which are the pre-pinned values).
Fixes https://gitlab.com/kicad/code/kicad/issues/7291
2021-02-01 00:35:45 +00:00
8778599c0d
Apply same nettie hack to zone filler
...
The nettie hack is used in DRC but we also need to use it in zone filler
to allow zones to be used with netties. We limit this to the
appropriate nets in the nettie
Fixes https://gitlab.com/kicad/code/kicad/issues/7351
2021-01-31 16:16:48 -08:00
991c8fbf8f
Use the new nudge path for the footprint lib table, save global and project mru differently
2021-01-31 19:01:33 -05:00
1a3ab551cf
Cleanup
...
FindLineSegmentIntersection() was refactored in 2012 but there are a few
uses that didn't get updated. This finalizes the cleanup
Fixes https://gitlab.com/kicad/code/kicad/issues/7365
2021-01-31 15:55:52 -08:00
8567739a7a
Remove conditions from common immediate-mode keys
...
The conditions prevent use in immediate mode for common actions. While
this makes enable/disable easier in menu items, this fix is a patch
until we refactor the action framework to distinguish between immediate
mode hotkeys that should start without selections and menu items that
need a selection before running.
Fixes https://gitlab.com/kicad/code/kicad/issues/5333
2021-01-31 14:45:24 -08:00
b54e951ed8
Fix a couple of checks in Fabmaster
2021-01-31 14:12:40 -08:00
8f21034254
Fix invalid windows macro
...
Missing one underscore at the end
2021-01-31 16:15:50 -05:00
051621a2ca
Use M_SQRT1_2 in place of the number
2021-01-31 15:47:23 -05:00
3d45668354
Fix typo in TRACK::GetEndY
2021-01-31 15:43:12 -05:00
21fe8542df
Remove shadowing of identical base m_parser member
2021-01-31 12:56:27 -05:00
abf0a46dce
Refactor PICKER_TOOL and push up snapping disable functionality
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7348
2021-01-31 09:50:41 -05:00
a45b86d2ba
Fix Coverity warning
2021-01-31 09:50:41 -05:00
a868fb97b6
Preserve Uuids when editing board footprints.
...
One way to do this would have been to keep the Uuids in the editor
copy. However, this opens us up to errors if we forget a Save As or
export path and end up writing the Uuids out somewhere else.
In the end, it felt safer to store a map of the original Uuids and
restore them if we happen to save the editor footprint back to the
board.
Fixes https://gitlab.com/kicad/code/kicad/issues/7312
2021-01-31 14:09:59 +00:00
70e6d0e79f
altium: use those new fancy user definable layers and import the name from Altium
2021-01-31 11:15:08 +01:00
56ea55ae9c
Make sure that NPTH pads still get handled in copper clearance checker.
...
... because that's where we do hole-to-copper clearance testing.
Also augments the Clearance Resolution reporter to report on said
hole clearances.
And changes the interpretation of HOLE_CLEARANCE_CONSTRAINT to include
local pad clearance overrides.
Fixes https://gitlab.com/kicad/code/kicad/issues/7325
2021-01-31 00:33:35 +00:00
6a9e1ecf9e
altium: Center board after import
2021-01-30 17:43:02 +01:00
41234a8373
Implement more precise annotation-required messages.
...
Also moves the message to an infobar so it's more noticeable.
Fixes https://gitlab.com/kicad/code/kicad/issues/7332
2021-01-30 16:31:27 +00:00
a235103e48
Redo pad & via painting (again).
...
New strategy isolates all draw/don't draw decisions to the ViewGetLOD
routines, and all dimmed/not dimmed to PCB_RENDER_SETTINGS::GetColor.
The actual drawing in PCB_PAINTER is more-or-less conditon free.
Also adds new layers for pad and via hole walls so that they can be
controlled for high-contrast mode.
Also changes the drawing paradigm so that the pads are drawn even when
not on the high contrast layer, just in low contrast. The hole wall
is drawn in high contrast. This actually makes things clearer to the
user (although to be honest was done to keep from having to re-render
pads when the high contrast layer changes since we have two separate
layers now that we can adjut colours on).
Fixes https://gitlab.com/kicad/code/kicad/issues/7328
2021-01-30 16:31:27 +00:00
488a5b7567
Draw via holes in high contrast when they cross a high contrast layer.
2021-01-30 16:31:27 +00:00
6b685dfb3f
Fix the knockout conditions
...
We need to knock out thermal clearance for same net pads but this
doesn't need to be placed in the regular clearance area (probably).
Fixes https://gitlab.com/kicad/code/kicad/issues/7321
Fixes https://gitlab.com/kicad/code/kicad/issues/7340
2021-01-30 08:15:00 -08:00
73886aecb1
Ensure partially triangulated polys are not valid
...
Moves rule area triangulation outside of layer iterator and keeps the
triangulation_valid flag false until the triangulation has been
completed.
Fixes https://gitlab.com/kicad/code/kicad/issues/7032
2021-01-29 16:33:57 -08:00
386ead30c5
All circle and arc tools to select all at first
...
Non-layer elements can be logical centers for the circle and arc tools.
We allow the non-layer to snap for the center points and revert to only
on-layer elements after
Fixes https://gitlab.com/kicad/code/kicad/issues/7327
2021-01-29 10:14:44 -08:00
553166f932
Handle ARC bbox in tracks
...
Need to handle arcs separately to ensure we get the full bounding box
Fixes https://gitlab.com/kicad/code/kicad/issues/7318
2021-01-29 09:07:23 -08:00
30ba3aa240
Get python loading the new "user scripting" paths
2021-01-28 23:45:53 -05:00
43fd416d13
Flip the footprint new library flow to prompt global or project first
2021-01-28 20:15:44 -05:00
b5e9a949bc
Selection: skip sloppiness pruning if invalid
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7320
2021-01-28 19:51:29 -05:00
74a5db64c2
Update pad netnames (and numbers) to the new visibility architecture.
2021-01-28 23:31:38 +00:00
21bec6c016
Comment.
2021-01-28 23:31:38 +00:00
6983bcd55b
Push addition of shape width down into computeArcBBox.
...
Also improves performance by calling GetBoundingBox only once (this
is not always an inexpensive routine for some items, such as
polygons).
2021-01-28 22:29:28 +00:00
1733a23ac7
Take width into viewBBox account
...
Don't let objects disappear until their full extend has been removed
from view.
Fixes https://gitlab.com/kicad/code/kicad/issues/7318
2021-01-28 14:20:13 -08:00
714430fefa
Flash pads when connected by zone
...
Zone connections (even half-connections) should trigger the connected
logic in flashPads. This removes the double-standard for painting pads
and imposes thermal standoff based on the net connection to the pad if
it shares a net, not just if connected
2021-01-28 13:21:22 -08:00
1a7b7e84c6
Use consistent terminology for component placement files.
...
CHANGED footprint positions files -> component placement files.
Not all footprints get placed, so component is a more neutral word.
Use of "placement" instead of "positions" removes the double-plural
that makes footprint positions files such a mouth-full.
Fixes https://gitlab.com/kicad/code/kicad/issues/7097
2021-01-28 19:24:55 +00:00
636ae012ed
Overhaul the pad drawing special cases yet again.
...
New strategy is to draw the hole wall cylinder if the pad (or via)
isn't flashed on a particular layer. This is (1) more correct,
(2) keeps pads which aren't flashed on any layer from disappearing,
and (3) allows us to remove a bunch of the other special cases.
Or at least I think it does. The proof will be in the (lack of)
follow-on bug reports....
Also fixes a bug where via annular rings weren't highlighted in
high contrast mode.
Fixes https://gitlab.com/kicad/code/kicad/issues/7279
2021-01-28 17:02:42 +00:00
2ef00e9de4
Rebuild ratsnest when importing netlist
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7287
2021-01-27 17:57:00 -08:00
89a72df0b1
Fix a few FABMASTER issues
...
- Custom pads now properly supported with offset/rotation
- Fix missing pads from alternate layers
Fixes https://gitlab.com/kicad/code/kicad/issues/7299
2021-01-27 17:50:14 -08:00
beb50c529e
Reorganize the CMake folder to separate build and configure steps
...
The BuildSteps folder now contains the CMake scripts that are
called during the build process as individual stages, while
the root CMakeModules directory contains the CMake files used
during the configuration phase.
2021-01-28 00:24:22 +00:00
2807a37fc0
Create a stock scripting path helper
2021-01-27 19:12:18 -05:00
e6dd95e83a
Create a default user projects folder
2021-01-27 19:12:18 -05:00
28c6967dbc
Start trying to shuffle around path management
2021-01-27 19:12:18 -05:00
6a39b81647
Fix the last of broken Doxygen comment specifiers.
2021-01-27 17:39:44 -05:00
3e42ba18a9
Show dragging tools in context selection menu for components
...
Show the dragging tools in the context selection menu when a single
component is selected. Prevent the dragging tools from appearing when
more than one object is selected, as they will not activate anyway.
Fixes https://gitlab.com/kicad/code/kicad/issues/7258
2021-01-27 19:55:42 +00:00
06a0094597
Minor improvements to layer highlighting.
2021-01-27 14:52:22 +00:00
bb79eb0e45
Fix typo causing no netnames in SPECCTRA export
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7298
2021-01-26 22:04:45 -05:00
1e030655cd
Always create project when doing a Save As on a board with a project
2021-01-26 21:58:17 -05:00
bea310569b
Fix parsing of track/via user sizes from legacy boards
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6134
2021-01-26 21:51:36 -05:00
30f3a7d124
Rework high contrast for pads/vias slightly
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6923
2021-01-26 21:02:11 -05:00
79f94c096e
Rename legacy selection filter action to avoid confusion
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7290
2021-01-26 18:15:36 -05:00
aefc107d86
Fix button sizing
2021-01-26 13:42:02 -08:00
9a51a75403
Confirm when cancelling a changed custom rule
2021-01-26 08:18:38 -08:00
1e9639e89c
Save pintype alongside pinfunction (in pads).
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7283
2021-01-26 15:28:48 +00:00
0e7c18119e
Make sure pads are unlocked when editing footprint from board.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7274
2021-01-26 15:28:48 +00:00
2e58826338
Minor fix: remove an unwanted font setting from panel_setup_constraints_base.fbp
...
that cannot be removed using wxFormBuilder due to a bug in wxFormBuilder.
2021-01-26 14:03:12 +01:00
5a5f96bd9f
More consistent naming.
2021-01-26 11:41:47 +00:00
b165ae6519
Fix note formatting issues.
...
Also removes the "tip" icon which doesn't work on OSX and isn't as
important as the graphics which actually convey information. Replaced
with the more generic "Note: " string.
Fixes https://gitlab.com/kicad/code/kicad/issues/7281
2021-01-26 11:29:30 +00:00
7d6c1c5ee6
Improve comments.
2021-01-26 10:56:19 +00:00
dca7e44455
Fix a missed Module -> Footprint.
2021-01-26 10:56:19 +00:00
b96bcc86b1
Don't restrict start item to same layer if snapping is enabled
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7276
2021-01-25 21:19:26 -05:00
96af236493
Code cleanup: remove include wx.h from pcb_plot_params.h.
...
including wx.h is useless for this file, and include wx.h in a lot of other files.
Include wx.h must be made only when needed in a given file, because on Windows
it include some headers that frequently create collision with kicad declarations
2021-01-25 16:18:46 +01:00
d933a0a863
Use the pencil for Properties in Pcbnew
2021-01-25 14:21:23 +00:00
eba09a59e9
Remove inappropriate icon
2021-01-25 14:21:22 +00:00
09eb4b35c6
Make sure footprint edges get checked.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7267
2021-01-25 13:20:16 +00:00
d40fe127aa
Update pad locked status when adding footprints from schematic.
...
Also fixes some latent bugs with not updating the local ratsnest
visibility in other places, and the netcode in update PCB from schematic.
Fixes https://gitlab.com/kicad/code/kicad/issues/7202
2021-01-25 01:20:36 +00:00
5a9c0a9b5a
Quiet a few coverity warnings
2021-01-24 14:53:18 -08:00
47d5900600
Fix build warnings
2021-01-24 11:37:48 -08:00
04cc64c008
Restore the old reference after rotation or flip instead of clearing
...
After a rotation or flip the reference point has to be restored to the
previous value to prevent the dragged item from warping to the cursor.
Before this change, the reference point was only cleared, causing odd
behavior when a rotation or flip was performed.
Fixes https://gitlab.com/kicad/code/kicad/issues/7112
2021-01-24 18:56:46 +00:00
f353fc448b
Fix edge cases in EDIT_TOOL::DragArcTrack
2021-01-24 16:41:11 +00:00
99d203feae
Clarify CIRCLE::ConstructFromTanTanPt
...
Remove unused bool aAlternateSolution and add doxygen comments
2021-01-24 16:41:11 +00:00
48823c0723
Formatting fixes and fix qa_kimath following rebase
2021-01-24 16:41:10 +00:00
6e7ae93cc8
EDIT_TOOL::DragArcTrack Fix incorrect undo history when items are deleted
...
Need to make sure we only apply one COMMIT operation per object before calling COMMIT::Push() or COMMIT::Revert()
2021-01-24 16:41:10 +00:00
2b5c1bae97
CHANGED: Dragging a curved track starts an interactive resizing of it, keeping start an end points tangent
2021-01-24 16:41:10 +00:00
25956152c6
Scan actual nets; not assumed nets.
...
Specctra exporter should not assume that PCB nets are numbered
sequentially without any holes.
Fixes https://gitlab.com/kicad/code/kicad/issues/7249
2021-01-23 22:55:03 +00:00
d5d9372839
Don't cancel dialog when esc-ing out of autocomplete.
2021-01-23 22:55:03 +00:00
15cc368918
Gerber plotter: prepare optimization of aperture macros type free polygons.
...
They are used for chamfered round rect pads, and can be used for custom shaped pads.
No actual change currently, but the shape rotation of custom pads and chamfered rr pads
can be now used in gerber plots.
2021-01-23 21:15:27 +01:00
d8c7c8f700
Evaluate rules when fetching zone edge clearance.
2021-01-23 17:04:44 +00:00
2d8cac658e
Allow negative clearances to signal supression of DRC test.
2021-01-23 00:10:01 +00:00
0ba0160da9
Add a PT_NIC pin electrical type and a netlist token for SCH_NO_CONNECT.
...
ADDED a new pin electrical type "free" for internally unconnected pins.
CHANGED the "unconnected" pin electrical type is now represented by
"no_connect" in files and netlists. (The legacy syntax is also accepted
in files.)
2021-01-23 00:10:01 +00:00
f5e35af1a5
Transmit pin electrical types through to pads.
2021-01-23 00:10:01 +00:00
9ac807bdd2
Freeze implicit footprint file version at last before explicit.
...
We have been writing footprint versions for a while now, but we were
still interpreting the lack of a version as "current". This changes
lack of a version to mean "last format before we started writing out
versions".
Fixes https://gitlab.com/kicad/code/kicad/issues/7143
2021-01-23 00:10:01 +00:00
cbff706916
Update the .fpb file to be able to open it with wxFormBuilder 3.9, used by Kicad
2021-01-21 20:28:05 +01:00
3fcd0860c1
Make 'E' go straight to Custom Track Width dialog.
...
Also fixes some mouse capture issues.
Fixes https://gitlab.com/kicad/code/kicad/issues/7198
2021-01-20 18:19:55 +00:00
07d4a28024
Improvements to pcbnew action plugins settings panel
...
1. Add open plugins directory button (same as in tools menu)
2. Add show plugin errors button to help debug issues
2021-01-20 09:09:53 +00:00
74aa081b8a
Don't add board-only footprints to the netlist (fixes back-annotation issue)
2021-01-20 00:37:38 +00:00
360953ba98
"comp" -> "symbol".
2021-01-19 23:50:40 +00:00
0ded846130
Go back to previous arc midpoint editing routine.
...
It avoids erratic behaviour near the chord or end-points.
Fixes https://gitlab.com/kicad/code/kicad/issues/7135
2021-01-19 23:50:40 +00:00
80dbc24326
Icons: remove superfluous icon
...
Remove icons where menu text gives context
2021-01-19 22:57:25 +00:00
ef2aa8a730
FP Editor: remember to update appearance manager
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6926
2021-01-19 20:24:16 +00:00
060635b14c
fabmaster: Fix graphic handling in geometry section
2021-01-19 12:16:40 -08:00
35978adef9
Don't run dimension updates while parsing files.
...
They mess up the geometry when only partial values are provided.
Fixes https://gitlab.com/kicad/code/kicad/issues/7177
2021-01-19 16:09:44 +00:00
25ff0fa662
Fix typo in unit label assignment and some minor layout improvements.
2021-01-19 16:09:44 +00:00
e9dc1824d6
Minor improvements to layout.
2021-01-19 16:09:44 +00:00
06dec36625
Improve layout and terminology in PCBNew/FPEditor edit settings.
2021-01-19 13:16:26 +00:00
1ac47c2ac6
Fix misleading tooltip.
2021-01-19 11:05:25 +00:00
0a2a3c9903
Fix Coverity-discovered typo.
2021-01-19 10:57:07 +00:00
330d717c69
Fix typo
2021-01-18 21:50:26 -05:00
7461b96dea
Hide the selection tool submenu in the FP Editor
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7164
2021-01-19 00:30:44 +00:00
12fe44d4b3
Snap arc center *by* the grid, not *to* the grid.
...
Also fixes a bug with editing an arc endpoint because the cursor pos
was being forced before the arc constraints stuff had been run (in
updateItem()).
2021-01-19 00:26:31 +00:00
b8dfcb34c4
Revert "Use less-sophisticated arc editing math."
...
This reverts commit 3b424d3868
2021-01-18 12:44:27 -08:00
44655b98de
Initialize variables properly
2021-01-18 18:35:10 +00:00
d030d1667b
Fix improper string creation in fabmaster importer
2021-01-18 18:35:10 +00:00
1e33928b96
Fix issues with zone filling connectivity locking
...
Two issues found with the locking system used to prevent access to
stale connectivity data during the zone fill process:
1) a std::mutex has undefined behavior if you try to use it to guard
against access from the same thread. Because of the use of wx event
loops (and coroutines) it is entirely possible, and in some situations
inevitable, that the same thread will try to redraw the ratsnest in the
middle of zone refilling.
2) The mutex was only guarding the ZONE_FILLER::Fill method, but the callers
of that method also do connectivity updates as part of the COMMIT::Push.
Redrawing the ratsnest after the Fill but before the Push will result in
stale connectivity pointers to zone filled areas.
Fixed (1) by switching to a trivial spinlock implementation. Spinlocks would
generally not be desirable if the contention for the connectivity data crossed
thread boundaries, but at the moment I believe it's guaranteed that the reads
and writes to connectivity that are guarded by this lock happen from the main
UI thread. The writes are also quite rare compared to reads, and reads are
generally fast, so I'm not really worried about the UI thread spinning for any
real amount of time.
Fixed (2) by moving the locking location up to the call sites of
ZONE_FILLER::Fill.
This issue was quite difficult to reproduce, but I found a fairly reliable way:
It only happens (for me) on Windows, MSYS2 build, with wxWidgets 3.0
It also only happens if I restrict PcbNew to use 2 CPU cores.
With those conditions, I can reproduce the issue described in #6471 by
repeatedly editing a zone properties and changing its net. The crash is
especially easy to trigger if you press some keys (such as 'e' for edit)
while the progress dialog is displayed. It's easiest to do this in a debug
build as the slower KiCad is running, the bigger the window is to trigger this
bug.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6471
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7048
2021-01-18 13:22:12 -05:00
26bc29808a
Clean up Text Properties dialog.
...
It's no longer used for dimensions so doesn't need the line thickness
controls.
The spacing was a bit wonky.
Changed to disabling rather than hiding visibility checkbox. The less
the GUI moves around the better.
2021-01-18 15:20:15 +00:00
4f399d4304
One more attempt to fix flipping geometry.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/4480
2021-01-18 15:20:15 +00:00
479487ceb1
Tidy up context menus a bit
...
Try and put the common actions in the same places
2021-01-17 22:42:03 +00:00
6bb9aeab4b
Position relative: store discarded pad for use as the selection anchor
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6996
2021-01-17 14:25:52 -05:00
f1221a9ca3
Resolve text variables in title blocks for outputing to netlist.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7153
2021-01-17 16:24:22 +00:00
1754504234
Fabmaster: fix MSVC build
...
std::map is not move-constructable on MSVC because
it is not declared noexcept (and is not required to be
by the standard)
This means that a struct containing graphic_element
cannot be inserted into a vector with move semantics without
compile errors. However, wrapping it in a unique_ptr
works.
2021-01-17 10:23:31 -05:00
68efdb2fff
Push shared parts of GRID_HELPERs into common.
2021-01-16 23:18:10 +00:00
950db6ff9c
pcbnew: Add Fabmaster import
...
Allows importing ASCII design output from OrCAD designs
2021-01-16 14:28:33 -08:00
3b424d3868
Use less-sophisticated arc editing math.
...
While it doesn't do the tangent retention that the old version did,
this one I can at least make work.
Fixes https://gitlab.com/kicad/code/kicad/issues/7135
2021-01-16 20:46:14 +00:00
00918c68f5
Don't do clever snapping logic when drawing a circle
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7131
2021-01-16 08:39:20 +00:00
38455c25ef
Bring back consideration of world scale to PcbNew snapping
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7125
2021-01-15 12:29:47 -05:00
08d595c9bf
Move title block fields to global availability in PCBNew.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7118
2021-01-15 15:41:18 +00:00
7dc2ca93cd
Make sure we mark board-only-footprint nets as current.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6871
2021-01-15 12:46:48 +00:00
6cc39d8011
Don't allow moving locked pads with Position Relative dialog
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6996
2021-01-14 22:14:00 -05:00
0b7fc0e2d9
Update local ratsnest state when toggling appearance control
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7035
2021-01-14 22:03:23 -05:00
36508807e7
Give the pad placement tool a context menu.
...
ADDED: allow pad properties to be edited while placing pads.
Fixes https://gitlab.com/kicad/code/kicad/issues/6953
2021-01-15 00:52:03 +00:00
965482bd7f
Improve some tooltips.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7116
2021-01-14 22:35:32 +00:00
9f24ea0bb7
altium: fix non-copper pads. Roundrect pads were not filled and SetLocalCoord() does not transform polygons into the local coordinates, which is unexpected.
2021-01-14 22:21:05 +01:00
54cf67dad2
Pcbnew, drill map: fix incorrect position of texts for small boards.
...
Fixes #7111
https://gitlab.com/kicad/code/kicad/issues/7111
2021-01-14 18:52:04 +01:00
0129c7ae52
Notify appearance panel when net is (un)hidden by board inspection tool
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7039
2021-01-14 17:22:41 +00:00
02ccd5fbdb
Make sure properties commands don't go to other tools during routing.
...
Brings up the track widths (or diff pairs) context menu instead,
which seems to be the closest parallel.
Fixes https://gitlab.com/kicad/code/kicad/issues/7099
2021-01-14 15:19:09 +00:00
3e920c665f
Special case via area generation.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7105
2021-01-14 12:48:44 +00:00
f0b11896da
Clip the first segment in leaders
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6548
2021-01-14 00:10:41 +00:00
13a4717aed
Add center handles to rectangle edits
...
Allows changing a single dimension at a time. Matching the polygon edit
tool.
Fixes https://gitlab.com/kicad/code/kicad/issues/7085
2021-01-13 14:04:21 -08:00
ffdff21f45
Use a sloppier hittest for the collector as well as the actual hittest.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7079
2021-01-13 21:22:24 +00:00
e3e9bfc1b8
Fix compile error
2021-01-13 13:21:27 -08:00
605dcfbedf
Fix Windows script location
...
Windows has arbitrary installation locations, so reference relative to
the executable
2021-01-13 13:11:26 -08:00
b57ad4b2f9
Correct SWIG path
...
Don't offset from executable, this is an absolute path
Fixes https://gitlab.com/kicad/code/kicad/issues/7089
2021-01-13 12:34:04 -08:00
da4b269783
Make sure pad local clearances get in to m_worstClearance.
2021-01-13 12:37:20 +00:00
0bce280424
Make sure design rules get recompiled after netclass changes.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7082
2021-01-13 12:37:20 +00:00
d2d4ffe6d0
Dismiss infobar if it's dismissable on board save
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7071
2021-01-12 23:24:13 -05:00
5931a39c0f
Fix layer preset overwriting ratsnest settings
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6975
2021-01-13 01:22:30 +00:00
6ed2a831d8
Don't override the router tool with drag actions
...
Before processing the select tool actions, we check if the router is
currently active and if it is, pass the event for processing in other
tools
Fixes https://gitlab.com/kicad/code/kicad/issues/7021
2021-01-12 15:44:20 -08:00
ad97fabfd3
Add missing const to Matches
2021-01-12 20:51:32 +00:00
dc02ec9758
Remove a few const_cast
2021-01-12 20:51:31 +00:00
07635d2fc7
Minor adjustments
2021-01-12 20:51:31 +00:00
ac94d72d2d
Add more const specifiers
2021-01-12 20:51:31 +00:00
ec0af24f13
Make wxFindReplaceData argument const
2021-01-12 20:51:31 +00:00
76cc7b98a7
Fp editor, DIALOG_PAD_PROPERTIES: do not disable posX and posY settings.
...
When a pad is locked, posX and posY settings in DIALOG_PAD_PROPERTIES must
be locked only for the board editor, not in the fp editor.
2021-01-12 20:33:52 +01:00
2cb8dff650
Use KICAD_DATA for data path lookup in scripting
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7036
2021-01-12 08:22:17 -08:00
cd2c46e5c9
Make "... file is read only." warnings translatable.
2021-01-12 14:33:35 +00:00
beab68db13
Fix bone-headed error in rules optimization.
2021-01-12 12:46:51 +00:00
d4c36230d2
Pcbnew, Graphic items: show the locked status in msg panel and dialog properties.
2021-01-12 10:00:21 +01:00
01181ccb2f
Make sure project is unlinked before deleting it
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/7038
2021-01-11 22:17:13 -05:00
a00b9cc821
Icons: general tweaks and pixel alignment
...
+ minor rename
+ fix missing bitmap in DRC panel
2021-01-11 23:31:25 +00:00
dc83cb7a41
Icons: general tweaks and pixel alignment
...
+ remove some unused icons
2021-01-11 23:31:25 +00:00
32f7f30958
Icons: remove where they don't make sense
...
Also avoid icon reuse
2021-01-11 23:31:25 +00:00
8fba0c257b
Icons: remove more inconsistencies around Select
...
Missed from 5d9b2d3fea
2021-01-11 23:31:24 +00:00
740df93808
Don't dereference board groups in fp editor
...
The Footprint editor group resolution should stop at the footprint level
to avoid breaking into groups that cannot be accessed.
Fixes https://gitlab.com/kicad/code/kicad/issues/7049
2021-01-11 14:58:33 -08:00
63e2046eb0
Performance improvements for DRC rules.
2021-01-11 22:09:36 +00:00
50889a9ed6
Promote mouse drag settings to full enums.
2021-01-11 22:09:36 +00:00
c09dc5abdd
Prevent locking items in footprint editor
...
Adding footprints to the board now has a preference for whether we want
pads locked or unlocked by default
2021-01-11 11:23:26 -08:00
1b755bbc37
Fix issues in ConvertOutlineToPolygon() related to S_POLYGON PCV_SHAPE
...
Fixes #7046
https://gitlab.com/kicad/code/kicad/issues/7046
2021-01-11 17:05:44 +01:00
a4d417f5c0
Get rid of "drill" terminology when talking about finish hole size.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7044
2021-01-11 13:49:43 +00:00
493a784b62
Fix Pcbnew search "not found" prompt not displayed
...
Before this, "Searching..." prompt will not go away if nothing was found
in a search session. A bug I noticed while working on !611 . After this
fix, "foo not found" will be displayed when Pcbnew cannot find the
given text.
2021-01-11 13:48:20 +00:00
dd328d230b
Make Pcbnew search about zone names, fixes #6951
...
I put zones in "other text items" category of searching as I thought it
would be the appropriate one.
Fixes https://gitlab.com/kicad/code/kicad/issues/6951
2021-01-11 13:48:20 +00:00
1eee72ec65
Fix library tree behavior when duplicate project table entry is disabled.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/5438
2021-01-11 07:46:07 -05:00
6c648df4c6
Support 3 drag vs. select options, and unifiy with other drag prefs.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/5493
2021-01-11 11:50:14 +00:00
7134ff2da6
Try a different arrangement of Board Setup pages.
2021-01-11 11:50:14 +00:00
9ce6c2be80
Group global editors under tools menu.
...
Also improves some terminology in Remove Unused Pads.
2021-01-11 11:50:14 +00:00
8ee324b1a9
Add bezier output to VRML
2021-01-10 11:28:15 -08:00
067b94c410
DRC: Fix a incorrect message and marker position when testing dangling vias.
...
Commit 6ffb721
2021-01-10 10:21:24 +01:00
828ecb76aa
Remove polyline 3d check added by previous fixes
...
Fix #7030
2021-01-09 18:56:35 -05:00
4f6134b60d
Check for CCW polys
...
Use rectangles for 4-sided polygons that are rectangular regardless if
they are CW or CCW oriented
2021-01-09 13:05:58 -08:00
8036303f8f
Add margin to both sides to avoid drawing 0-poly
...
We cannot draw degenerate polygons, so we need to test for 0-size shapes
especially after scaling the mask. The mask adjustment is from both
sides however, so it needs to be doubled.
Fixes https://gitlab.com/kicad/code/kicad/issues/7020
2021-01-09 13:05:58 -08:00
ed7b3373d1
Disentangle copper- and board-edge-clearances in Clearance Resolution...
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6983
2021-01-09 16:44:03 +00:00
08b93bd5ba
FOOTPRINT::GetBoundingHull(): avoid returning a empty hull SHAPE_POLY_SET,
...
when a footprint contains only texts.
empty SHAPE_POLY_SET creates most of time issues (crashes for instance) when
containing no data.
Ensure the returned SHAPE_POLY_SET contains a minimal hull (a 0.04 mm square)
Fixes #7026
https://gitlab.com/kicad/code/kicad/issues/7026
2021-01-09 16:53:32 +01:00
daae68a6b8
French translation update.
...
Fix also a typo in 2 I18n strings.
2021-01-09 14:54:43 +01:00
5ae6f93af8
A groups children may also have children.
...
For instance, it could be a nested group or a footprint.
Fixes https://gitlab.com/kicad/code/kicad/issues/7025
2021-01-09 13:47:24 +00:00
78dcfb2392
Honour locks inside groups.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6841
2021-01-09 13:47:24 +00:00
7716f20a5b
Disentagle board edges from graphics in global delete.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/7024
2021-01-09 13:47:24 +00:00
e4f29d358c
Formatting.
2021-01-09 13:47:24 +00:00
cf2dd0bd38
Fix edit_tool pad handling
...
Check for footprint editor
Promote pad edits to footprint edits iff
- Pad is locked
- Footprint is not
Otherwise, handle the pad normally and prompt for locked items if found
2021-01-08 19:46:14 -08:00
1c9d8a9f4c
Don't warn on locked conversion
2021-01-08 16:49:47 -08:00
51f02ecc51
Fix alignment tool with locked footprints
2021-01-08 13:58:26 -08:00
721155165d
Don't move locked footprint if pads are locked
2021-01-08 13:58:26 -08:00
d6448ce6b4
Expose settings manager to python
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6989
2021-01-08 16:47:20 -05:00
d0af4e9f9d
Save a cancel value when asked if it's not being used to cancel.
...
Many, many KIDIALOGs use OK/Cancel and then rename both buttons to
confirm or deny some action. In those cases we *do* want to store
the deny actions if they check "Do Not Show Again".
Fixes https://gitlab.com/kicad/code/kicad/issues/6979
2021-01-08 21:32:19 +00:00
8fffb75347
Allow custom pads with 0-sized anchor pads.
...
(Surprisingly we used to in 5.1, so this is a regression.)
Also had to go back to the nag dialog as on a small screen the infobar
comes up behind the dialog. A lot of the errors have also been turned
into warnings, so the overall effect should still be to reduce nagging.
Fixes https://gitlab.com/kicad/code/kicad/issues/6992
2021-01-08 20:43:02 +00:00
3467e643e5
Move pad locking from footprint to pads.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6997
2021-01-08 20:43:02 +00:00
6ffb72159a
Remove vias if they only connect to single layer
...
A via takes up zone space on additional layers, so if we are not
connecting to those layers, then we should remove it.
Fixes https://gitlab.com/kicad/code/kicad/issues/7004
2021-01-08 09:39:43 -08:00
1e96374715
Consider tracks and vias together
...
Dangling tracks and vias affect each other and need to be considered at
the same time in order to fully remove the dangling segments
2021-01-08 09:35:58 -08:00
93d203aef7
Fix a I18n issue: a string flagged as translatable cannot be empty.
2021-01-08 18:16:00 +01:00
9424d66d22
Move footprint when selecting locked pad
...
Prompting to unlock is obtrusive and blocks the common action of
dragging from a pad to align footprints. The less common action of
editing pads in layout can be accomplished after unlocking the pads
Fixes https://gitlab.com/kicad/code/kicad/issues/6997
2021-01-07 19:46:06 -08:00
24435df6b0
Don't update 3D view on cursor movement
...
Our rendering pipeline is not set up for this kind of speed,
and this is a blocking operation at the moment.
Note that we will get an update at the end of the move
because OnModify does it.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6819
2021-01-07 20:43:14 -05:00
61bddd0928
LAYER_PADS_TH is not a dependent layer
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6999
2021-01-07 20:12:31 -05:00
111fa99f9f
PNS: Use last-segment posture optimization always
...
Also when auto-posture is enabled, don't flutter
until area threshold has been met.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6935
2021-01-07 20:12:31 -05:00
3fd128a75b
Performance enhancements.
2021-01-08 00:46:55 +00:00
5c22ffe422
Don't try to load a nonexistent layer setting
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6998
2021-01-07 19:09:54 -05:00
bf332b3189
Fix minor compil warnings
2021-01-07 20:55:24 +01:00
01fe3b91e9
Implement locking for graphic shapes.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6972
2021-01-07 17:39:18 +00:00
6ca9a42251
Removes 3 other instances of a potential encoding problem
...
Signed-off-by: hoijui <hoijui.quaero@gmail.com>
2021-01-07 17:36:49 +00:00
8c8516b7b1
Remove formbuild URL from hypertext links.
...
Also adds a tooltip.
Fixes https://gitlab.com/kicad/code/kicad/issues/6982
2021-01-07 15:12:19 +00:00
e41c06304b
Don't show a leading ratline to a NPTH.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6960
2021-01-07 12:25:04 +00:00
f702b64b8d
Minor improvements to formatting & SNR.
2021-01-07 12:25:04 +00:00
84dd78e01d
Fix the install location for vcpkg built python modules
2021-01-07 00:08:11 -05:00
52f822dedb
Remember autotrack width setting
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6971
2021-01-06 20:11:32 -08:00
0234b7278a
PNS: Make DIRECTION_45 North be up everywhere
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6935
2021-01-06 21:47:06 -05:00
ad8136541b
Improve layout and terminology of Remove Unused Pads.
...
Also removes the limitation of removing outside layers for pads.
It's already supported in Pad Properties so it's odd to not support
it here.
2021-01-07 01:27:12 +00:00
f372c8025b
Better sizing for some conditional dialogs.
...
These dialogs don't have growable features but do have conditional
features, so the size is better adjusted automatically by the code
then by the user.
2021-01-07 01:27:12 +00:00
43e7b1ab6e
Set icons for front/back assembly layers
2021-01-06 13:49:00 -08:00
c0f940438a
Clarify Flip action
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6954
2021-01-06 13:02:44 -08:00
2a088e5c7b
Add conversion of circles to zones and enable in footprint editor.
...
Also rule areas, of course.
Fixes https://gitlab.com/kicad/code/kicad/issues/6966
2021-01-06 17:21:49 +00:00
70967bfebd
Hierarchical menu parents don't get ...'s.
...
Also moves the Convert menu up a level. Nested hierarchical menus
should be avoided whenever possible.
2021-01-06 17:21:49 +00:00
8aeaaf99ef
Disable net selector for non-free vias.
...
Also moves the checkbox up so this relationship is clearer.
Fixes https://gitlab.com/kicad/code/kicad/issues/6967
2021-01-06 15:49:12 +00:00
366c7096b3
More double- and triple-pointer erradication.
2021-01-06 14:37:38 +00:00
426536c381
Don't show empty-net synthetic net in Net Inspector.
...
Also fixes an assert when deleting a net inspector row with no
parent row.
Fixes https://gitlab.com/kicad/code/kicad/issues/6962
2021-01-06 14:27:02 +00:00
46c4727783
Make MSVC happy again
2021-01-05 20:56:37 -05:00
2a24886d47
Icons: remove more duplicates
2021-01-06 00:35:20 +00:00
6fd718fbd8
Icons: replace old with new
2021-01-06 00:35:20 +00:00
5d9b2d3fea
Icons: new filter icon
...
+ remove icons where they don't make sense.
2021-01-06 00:35:20 +00:00
54724096ea
Icons: consistency between Eeschema and Pcbnew
2021-01-06 00:35:20 +00:00
fd04a176a4
Remove full path from drill report
...
Leaves just file name in place. Full paths are considered a security
risk for some
Fixes https://gitlab.com/kicad/code/kicad/issues/6949
2021-01-05 16:22:08 -08:00
71a93c71f7
Prevent footprint editor snapping to footprint
...
Inside the footprint editor, we only want snap points from the base
elements
Fixes https://gitlab.com/kicad/code/kicad/issues/6948
2021-01-05 16:08:30 -08:00
e7b047660c
PNS: Correctly assemble lines with reversed arcs
2021-01-05 17:57:21 -05:00
feda03f69b
PNS: Fix arc orientation when assembling lines with backwards arcs
2021-01-05 17:57:21 -05:00
7431d5c985
PNS: First pass at updating meander placers for arcs
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6464
2021-01-05 17:57:21 -05:00
8619086cf2
PNS: re-enable optimization of colinear segs in lines with arcs
2021-01-05 17:57:21 -05:00
8901e71fc8
PNS: Fix loop removal, make walkaround less broken for arcs
2021-01-05 17:57:21 -05:00
5676117d0b
Make small drill marks size configurable via advanced config for both printing and plotting
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/1972
2021-01-05 22:37:34 +00:00
81aa91ce2a
Run insideCouryard on all matching footprints, not just the first.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6945
2021-01-05 22:22:25 +00:00
4710b709d9
Only darken, don't hide vias unless requested
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6912
2021-01-05 14:00:15 -08:00
a9d4d9d7f0
Modify insideArea() to return true for zones only when fully inside.
...
Intersections is enough for other objects.
This is also a bit of a DRC performance improvement.
Fixes https://gitlab.com/kicad/code/kicad/issues/6934
2021-01-05 21:43:04 +00:00
02cd8c99cd
Better error messages when routing can't be started.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6541
2021-01-05 18:47:58 +00:00
b19ccd819e
Quiet compile warning
2021-01-05 09:16:38 -08:00
88d42724e6
Remove diff-pair-gap handling from single-line-router.
...
We can't really support it until we do min/max/opt shoving and
dragging.
Fixes https://gitlab.com/kicad/code/kicad/issues/6932
2021-01-05 16:54:52 +00:00
d975f2f6aa
Commenting and naming for clarity.
2021-01-05 16:54:52 +00:00
a48f0d21f7
More consistency in clearance resolution messages.
2021-01-05 16:54:52 +00:00
f7b20611c1
Enforce hole-to-hole min when placing diffpair vias.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6931
2021-01-05 00:26:49 +00:00
93bd2171ab
Formatting.
2021-01-05 00:26:49 +00:00
b40e3a39f5
Minor cleanup.
2021-01-04 23:59:36 +00:00
d24b034cbc
Cleanup (and a minor performance improvement).
2021-01-04 22:32:29 +00:00
597a74af9a
Corrects text of orthogonal dimensions
...
The 'outisde' position is now 'outside' in all orientations
Fixes https://gitlab.com/kicad/code/kicad/-/issues/5821
2021-01-04 19:53:39 +00:00
2ea6bc5529
Formatting.
2021-01-04 19:19:55 +00:00
648c42f643
Show collisions preventing routing from starting.
...
Also introduces a callback to the infobar so that the view can be
cleaned up when the timer expires.
Fixes https://gitlab.com/kicad/code/kicad/issues/6930
2021-01-04 19:19:55 +00:00
354d9b4e63
Simplify layer pair indicator icon.
...
It now just has top layer / bottom layer from the router's layer
pair. The current layer is visible in the drop-down just to the
left, and the via stuff was confusing anyway.
2021-01-04 19:19:55 +00:00
5c8927678a
Don't link a project to a board more than once
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6929
2021-01-04 13:23:19 -05:00
76cfd19621
Icons: fix incorrect icon in footprint browser
2021-01-04 01:44:02 +00:00
c09d3b765a
Slight improvement to error text for when drill is same size as pad.
2021-01-04 00:03:21 +00:00
33aa6edb01
Don't run clearance tests on unflashed NPTH pad layers.
2021-01-04 00:03:21 +00:00
d0b82ea26e
Show better descriptions of through-hole pads.
2021-01-04 00:03:21 +00:00
7378c2c3b3
Implement max hole size DRC checks.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6893
2021-01-04 00:03:21 +00:00
71215bcab3
Make sure TH pads get collision layer highlighted.
...
Also cleans it up to centralise all the decision-making.
Fixes https://gitlab.com/kicad/code/kicad/issues/6925
2021-01-03 21:16:09 +00:00
491fc2c8f2
Save DXF plot params to file and remove some dead code.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6720
2021-01-03 14:22:25 +00:00
a1d7a959f7
more fixes and enhancements in DIALOG_EXPORT_STEP.
2021-01-03 11:38:09 +01:00
5db75805bd
Step exporter: better values for min distance between 2 points to merge them.
...
- The default value is 0.01 mm (according to comments and similar to the 3D viewer
settings that uses 0.02 mm)
- The export dialog has now 3 values 1 micron, 0.01mm (default) and 0.1 mm
The 0.1 micron option is removed: it makes no sense for a mechanical tolerance.
2021-01-03 11:01:03 +01:00
f01297fedd
Convert an annoying message box to an infobar
2021-01-02 22:14:10 -05:00
154e19b6e7
Icons: use common prefix for small 16x16
2021-01-02 23:16:33 +00:00
5a3f4f52df
Icons: add new icon for Pcbnew 'Special Tools...'
2021-01-02 23:16:33 +00:00
6d3c1c7716
Icons: remove unused sources/duplicates + rename
2021-01-02 23:16:33 +00:00
a06387fafd
Fix warning at compile time
2021-01-02 22:42:16 +00:00
f691828c8f
Nullptr safety.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6862
2021-01-02 22:26:12 +00:00
7e58f1aa9f
Fix display of pads in high contrast mode
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6912
2021-01-02 14:16:17 -05:00
8b849b1c49
Fix several bugs in hull push-back with vias.
...
1) take hole plating thickness into account
2) build hulls specifically for via so pushing back to the hull doesn't
have to try and figure out how much extra to push back for the via
and/or hole
3) clear MK_HOLE flags when colliding with the pad itself so that we
don't get stuck in HOLE mode
4) move flag setting/clearing to updateNearest() so that it will keep
track of the state of the nearest collision
Fixes https://gitlab.com/kicad/code/kicad/issues/6913
2021-01-02 19:14:44 +00:00
13094fdc28
Formatting.
2021-01-02 18:38:17 +00:00
85e42890c4
Distinction between via and via hole probably not useful.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6913
2021-01-02 16:41:09 +00:00
068af7d328
When routing don't give NPTH holes a copper clearance.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6903
2021-01-02 16:33:51 +00:00
b5e7611696
Don't cross-pollute CONSTRAINTs.
...
If you want the HOLE_CLEARANCE, then ask for it.
2021-01-02 16:33:51 +00:00
eba7cb222c
PNS: Fix initial posture guess for pads
2021-01-02 10:32:15 -05:00
6b6694f55f
Fix typo.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6913
2021-01-02 15:04:30 +00:00
42c114f6ed
Record status of via dragging in Walkaround mode.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/3967
2021-01-02 00:31:02 +00:00
419d8dcd6f
Minor cleanup.
2021-01-01 23:42:44 +00:00
8a049cf290
Make sure bounding boxes get cached on rule areas.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6898
2021-01-01 23:17:49 +00:00
018c17399d
SNR.
2021-01-01 23:17:49 +00:00
8ee72853fb
Be more targetted on when we load DRC Rules for better performance.
2021-01-01 23:17:49 +00:00
a69a4be853
Fix build error with icon names
2021-01-01 13:13:33 -08:00
72c27b2e33
Make expand selection stop at vias
...
During the first expansion, we are supposed to stop at vias and branches
(where three track ends connect). This needs to account for the number
of vias and tracks not just tracks
2021-01-01 09:31:44 -08:00
fc1b0ec11f
Improve feedback when routing in highlight collisions mode.
...
In particular, when Allow DRC violations is NOT turned on and we
bump in to an obstacle.
2021-01-01 17:25:37 +00:00
8de9cff4e0
Change environmental variables to human-readable
...
Versions specific variables that may point to objects that change
through versions, allowing multiple KiCad versions to operate correctly
(even on MSW) on the same machine.
2021-01-01 16:20:35 +00:00
6a81113c2d
Better comments in files related to my previous commit.
2021-01-01 17:09:32 +01:00
93e186f53e
SelectFootprintFromLibTree(): fix a issue similar to commit 27d47743.
...
Force immediate deletion of the APP_PROGRESS_DIALOG (do not use Destroy() )
because on Windows, APP_PROGRESS_DIALOG has some side effects on the event loop
manager. A side effect is the call of ShowModal() or ShowQuasiModal of a dialog
following the use of a APP_PROGRESS_DIALOG (if not deleted) has a broken behavior
(incorrect modal/quasi modal behavior).
2021-01-01 15:59:15 +01:00
f8f34982c0
Escape PCB text
...
Also keep a fail-safe for unescaping strings that are not previously
escaped
Fixes https://gitlab.com/kicad/code/kicad/issues/6901
2020-12-31 17:17:27 -08:00
3ba17e0a16
Formatting.
2021-01-01 01:02:06 +00:00
ecc0e861d3
Implement hole clearance and hole-to-hole clearance in router.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6882
2021-01-01 00:31:36 +00:00
5d8e6020d1
Improve clarity.
2021-01-01 00:31:36 +00:00
0e3c9de684
Formatting.
2021-01-01 00:31:36 +00:00
e060ee2a53
Factor in all clearance types when asking for worst clearance.
2021-01-01 00:31:36 +00:00
1b93663627
Formatting.
2021-01-01 00:31:36 +00:00
9a0f685a75
PNS: Consider arcs when searching for lines between joints
2020-12-31 13:05:43 -05:00
73248ab219
PNS: correct initial segment direction for posture solver
2020-12-31 13:05:43 -05:00
381aabdd2a
PCB_TARGET: add missing GetMsgPanelInfo() virtual function.
2020-12-31 15:46:58 +01:00
a6a2dae480
Footprint editor: ensure the pad editor is closed before load a new footprint.
...
When editing a new footprint from the board editor, if the Footprint editor has the pad editor
open, there is a risk of crash when replacing the footprint in edit.
Fixes #6892
https://gitlab.com/kicad/code/kicad/issues/6892
2020-12-31 10:53:14 +01:00
82e728dbf6
Remove drawing of annular rings in high contrast
...
High contrast should not show the annular rings from other layers. Once
the ring is removed, we hide the annular when not focused on a flashed
layer
Fixes https://gitlab.com/kicad/code/kicad/issues/6896
2020-12-30 17:38:30 -08:00
60fd7fdbb2
Fix comment
2020-12-30 18:52:56 -05:00
510db66f0e
PNS: Fix rollback for arc traces
...
PNS: Update posture solver after rollback
2020-12-30 18:23:24 -05:00
6105ac50da
ADDED: Default hotkey of CTRL+/ for switch corner rounding
2020-12-30 18:23:24 -05:00
b5b64a55ad
PNS: Only run optimization if lastNode is valid
2020-12-30 18:23:24 -05:00
79502a0d88
PNS: A new approach to arc placement
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6334
2020-12-30 18:23:24 -05:00
8d81abb57a
Consistent use of spaces in strings.
2020-12-30 22:57:50 +00:00
5a3e5781bf
Allow polygon drawing on edge cuts and courtyard
...
Prevents line splitting behavior needed in v5 when drawing polygons on
courtyards. Also provide property dialog with some smarts to handle
special layers
Fixes https://gitlab.com/kicad/code/kicad/issues/6900
2020-12-30 14:10:30 -08:00
b168b74919
CADSTAR Archive Importer: Fix position of multiline text with NO_ALIGNMENT in CADSTAR
2020-12-30 18:53:43 +00:00
ffee24be63
CADSTAR PCB Archive Importer: Rewrite loadBoardStackup routine
...
Uses BOARD_STACKUP::BuildDefaultStackupList instead of trying to build the stackup from scratch
Fixes several asserts / incorrect stackups in some older boards
2020-12-30 18:53:43 +00:00
a2cbbb963e
CADSTAR PCB Archive Loader: Correctly handle Dimension text
...
Do not parse fields in dimension text to allow splitting it into prefix and suffix
2020-12-30 18:53:43 +00:00
f74a86b7e1
Add missing dimension objects to BOARD::Move collector
...
Fixes import of orthogonal dimensions
2020-12-30 18:53:43 +00:00
45b621a3d1
CADSTAR PCB Archive Importer: Fix Import of Linear Dimensions (Angular dimensions not supported)
2020-12-30 18:53:43 +00:00
fbac766254
CADSTAR PCB Archive Importer: Refactor layer mapping and fix assert
...
An assert was being fired to due to incorrect BOARD_STACKUP_ITEM_TYPE on some boards
2020-12-30 18:53:43 +00:00
0a1045300b
CADSTAR PCB Archive Importer: Fix loading of net class settings
2020-12-30 18:53:43 +00:00
cde433c82e
CADSTAR PCB Archive Importer: Transfer Project to allow importing of Text Variables
2020-12-30 18:53:43 +00:00
03a23db4f7
CADSTAR PCB Archive Importer: Load PCB Text Variables to KiCad project
2020-12-30 18:53:42 +00:00
9ed4780fec
CADSTAR Archive Importer: Change architecture to Parse CADSTAR fields and store them in a static map
...
Architecture of the parser changed to have a shared PARSER_CONTEXT between all the individual parsers.
Parses CADSTAR fields such as <@DESIGN_TITLE@> or <@SHEET_NUMBER@> and replaces with an equivalent KiCad Text Variable.
2020-12-30 18:53:42 +00:00
bf9501e1d4
PNS: Fix auto-posture when placing via
2020-12-29 21:14:36 -05:00
689da3794d
PNS: Merge co-linear segments during placement
2020-12-29 21:14:36 -05:00
4c0aa6db1a
PNS: Disable smart pads optimization for vias
...
There is not much point with the current algorithm and it
breaks auto-posture.
2020-12-29 21:14:36 -05:00
94bf88d820
Pcbnew: Prevent selections jumping when dragged after flip or rotate
...
CHANGED: If you flip or rotate an item or selection of items, move
the mouse, press 'M' and start moving the mouse, the selection jumps
to where the mouse is. This MR fixes that so it doesn't happen.
This bug was reported against the 5.1.x branch but also affects the
5.99 branch. This MR is for the 5.99 branch.
Fixes https://gitlab.com/kicad/code/kicad/issues/4069
2020-12-30 01:02:04 +00:00
0b0af2f545
Fix layer ordering of pad net names
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6881
2020-12-29 18:31:44 -05:00
a637f310d0
Store zone display mode in project local settings
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6886
2020-12-29 17:19:01 -05:00
23f81412c3
Ensure connectivity is updated before filling zones
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6844
(maybe)
2020-12-29 14:58:45 -05:00
241823647b
DRC: Fix a minor memory leak
2020-12-29 14:58:45 -05:00
bc712a7383
Remove some stray printfs
2020-12-29 14:58:45 -05:00
76e8c62269
PCB_VIEW: Fix a few ASAN issues
2020-12-29 14:58:45 -05:00
35a5781f68
Don't look at project layer visibilities for footprint editor.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6873
2020-12-29 17:03:43 +00:00
97a99beef5
Fix missing ENUM_TO_WXANY decl.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6879
2020-12-29 14:37:03 +00:00
efd16dca66
Fix a bunch of issues with group selection and highlighting.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6686
2020-12-29 12:41:24 +00:00
f7a6dc26e9
Give GROUP_PROPERTIES_DIALOG its own files.
2020-12-29 12:41:24 +00:00
81d4e06f00
PNS: Consider pad orientation when routing
...
PNS: Skip smart pads when posture was manually forced
This allows a more-correct pad breakout to be chosen when
smart pads is off.
2020-12-29 01:06:46 -05:00
96d49d1473
PNS: Improved auto-posture when starting from a segment
...
The previous auto-posture algorithm worked great for pads
but not so great when starting routing from a segment.
Now we can optimize the posture based on the starting
segment if one exists, to maximize the "obtuseness" of the
posture.
2020-12-28 23:51:13 -05:00
3adff647a7
PNS: Preserve nearest vertex when dragging in shove mode
2020-12-28 19:44:39 -05:00
55394f343d
Don't use snapping for a selection interaction
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6856
2020-12-28 17:26:39 -05:00
be294dabce
PNS: Snap back to last valid point when committing a drag
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6651
2020-12-28 16:36:42 -05:00
e5b7e7d2b2
Add missing header needed for gcc builds
2020-12-28 16:02:06 -05:00
3e2aa8df3a
Thread safety for pad effective shape building.
2020-12-28 20:44:46 +00:00
cfb4e34b07
Cleanup.
2020-12-28 20:44:46 +00:00
93466fa165
Fix crash when adding 3D Models via Python
2020-12-28 20:03:54 +01:00
17cf2466aa
Fix overlapping definitions warning
2020-12-27 19:42:04 -05:00
c4bfca251b
PcbNew: show file format conversion warning in infobar
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6200
2020-12-27 19:17:58 -05:00
3c87e67753
PNS: Allow committing routes even when cursor moves beyond valid solution
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6651
2020-12-27 17:14:38 -05:00
1fc4523711
Remove pad-size-setting hack from PCB_PAINTER.
...
Also improves the pad warning and error messages, and moves a few
remaining nags from the setting infrastructure to the warning
infrastructure.
Fixes https://gitlab.com/kicad/code/kicad/issues/6141
2020-12-27 21:11:27 +00:00
2cdf9875b9
PNS: fix off-by-one in dragCorner45
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6644
2020-12-27 15:58:36 -05:00
c615b7a49b
PNS: make initial direction behavior consistent with fix-all enabled
2020-12-27 15:21:55 -05:00
132e78d2b8
Fix pcbnew collector prioritization
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6307
2020-12-27 13:50:11 -05:00
3b25e7344a
Fix deprecation warning. PyEval_InitThreads() is not needed for Python >= 3.7
...
See: https://docs.python.org/3/c-api/init.html#c.PyEval_InitThreads
With Python 3.7 this function is called by Py_Initialize()
With Python 3.9 this function is deprecated and does nothing
2020-12-27 19:18:49 +01:00
1c79e3174c
Pcbnew: Prevent footprint jumping when starting to drag it
...
CHANGED: When dragging a footprint, if the mouse isn't directly over the
footprint anchor when 'D' is pressed, the footprint center will jump to
the mouse position when dragging begins. This MR uses the current
mouse position instead of the footprint anchor as the inital reference
point when starting to drag.
Fixes https://gitlab.com/kicad/code/kicad/issues/6813
2020-12-27 17:43:52 +00:00
1579ce9f9e
Separate net updating from Edit Tracks & Vias into a second pass.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6858
2020-12-27 16:35:38 +00:00
10e51bfea7
Don't apply "normal" locking strategy to alignment options.
...
It's much more useful to use the locked items as targets.
Also fixes some issues with commits getting the wrong items when
pads are promoted to footprints.
Fixes https://gitlab.com/kicad/code/kicad/issues/6859
2020-12-27 15:02:25 +00:00
e3d95cc2c8
Formatting.
2020-12-27 15:02:25 +00:00
a675f1f9c5
pcb_painter, draw pad clearance outlines: use the pad shape for non copper layers.
...
For copper layers, if the pad shape is not on the active layer, only the hole
shape clearance is shown (this is correct).
But for non copper layers using the hole shape clearance make no sense
(as long as showing the clearance makes sense for some layers).
2020-12-27 11:20:48 +01:00
97f3c323c3
Pcbnew: fix missing escaping of texts in DIMENSION when saving the .kicad_pcb file.
...
Fixes #6855
https://gitlab.com/kicad/code/kicad/issues/6855
2020-12-27 10:18:23 +01:00
e1f76ea2ab
Gracefully handle dots in the outline path.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6854
2020-12-27 01:01:25 +00:00
3aca0e1853
Make sure we nofity of self-intersecting outlines.
2020-12-27 01:01:25 +00:00
8300e17b69
Fix botched attempt to report hole violations between no-net items.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6851
2020-12-26 16:24:51 +00:00
ab97035ecb
Handle closed shapes being processed after other shapes.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6845
2020-12-26 12:57:49 +00:00
af2219ba7f
Finish implementation of hole clearance checking.
...
It appears we never did via hole testing, and pad hole testing didn't
appear to get much testing.
2020-12-25 22:32:19 +00:00
0d57f90982
Make sure SCH-related frames use the schematic worksheet color.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6843
2020-12-25 16:59:41 +00:00
7a081b7c04
Naming consistency.
2020-12-25 16:59:41 +00:00
04c8d0e9d8
Comments.
2020-12-25 16:59:41 +00:00
60503652a1
Kick-start appearance panel to redraw on Mac
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6827
2020-12-25 10:44:18 -05:00
84ce814037
Repair segment ownership logic for rects and curves.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6847
2020-12-25 13:21:20 +00:00
9c4d3add15
Fix typo.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6845
2020-12-25 12:07:26 +00:00
8ad89ae457
PNS: fix manual posture mode
2020-12-24 17:31:54 -05:00
ef25c78a04
Separate polygonization error from chaining error.
...
This way we can report anything that doesn't exactly chain while still
applying a fudge factor for our own stuff.
Fixes https://gitlab.com/kicad/code/kicad/issues/1795
2020-12-24 21:02:14 +00:00
a9ff98bccc
Allow selecting locked pads at all times
...
Locked pads are a bit different from other locked items
and there are sufficient reasons to need to select them
that it makes sense to introduce this inconsistency.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6837
2020-12-24 14:35:44 -05:00
38b8bc89ac
Fix a pair of typos.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6839
2020-12-24 19:32:24 +00:00
d13de9c6c1
Zones: layer set must be initialized after m_isRuleArea
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6814
2020-12-24 11:29:23 -05:00
98c437e70f
Show the read-only notification for objects, too
2020-12-24 08:42:38 -05:00
db0df1fdc9
Don't try to update non-existent zone layers
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6803
2020-12-24 08:42:38 -05:00
5fffde09d4
Improve SNR and formatting.
2020-12-24 10:36:29 +00:00
d0429ced8d
Fix layer ordering logic for non-copper layers
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6817
2020-12-23 22:09:09 -05:00
8a2667c4c3
PNS: Fix all segments by default (and make optional)
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/5920
2020-12-23 21:55:43 -05:00
8c247fc97c
PNS: Add a setting to disable posture solver
...
PNS: Prevent autoposture flutter when trail has little area
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6797
2020-12-23 21:02:17 -05:00
eb1f07bade
Icons: standardise `export_png` to match set
2020-12-24 01:02:03 +00:00
d2018b122b
Icons: unify export_svg with the rest of the set
2020-12-24 01:02:02 +00:00
6489781408
Icons: use correct icons for show/hide ratsnest
...
- Remove old icon remnants
- Recolour show/hide_ratsnest to match KiCad style
2020-12-24 01:02:02 +00:00
6b420b191a
Use color theme backgrounds in page previews.
...
Also includes a *lot* of const fixing to make it happen.
Fixes https://gitlab.com/kicad/code/kicad/issues/6811
2020-12-23 23:18:38 +00:00
ffe7d2ea49
Only draw group boxes when selected.
...
Also ignore footprint groups when in board editor.
Fixes https://gitlab.com/kicad/code/kicad/issues/6826
2020-12-23 21:43:32 +00:00
17800b926f
Honour couryard_clearance rules when checking for courtyard overlaps.
2020-12-23 17:34:21 +00:00
f30fa60ed7
Need to start with full layer set if we want to end up with any.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6822
2020-12-23 15:15:09 +00:00
2f087dfa1b
Fix crash bug trying to delete zone from list twice.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6815
2020-12-23 14:24:35 +00:00
912657dd23
Component dragger: make relaxed segment pickup work for PTH pads
2020-12-22 22:43:44 -05:00
70c6314c67
Component dragger: be more generous about picking up tracks
...
We now pick up tracks that end anywhere in the pad, not just
at the pad anchor.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/5945
2020-12-22 22:28:24 -05:00
61ac9c8d90
Add multiple size icons for programs
...
In theory, the WM should now choose the closest size icon for its
purpose, making it easier to distinguish in space-constrained settings
Fixes https://gitlab.com/kicad/code/kicad/issues/6798
2020-12-22 15:37:26 -08:00
54ca087999
Update icon resource sets
...
Updates the .icns, .ico and .png files used by various distros to show
KiCad and KiCad files.
2020-12-22 15:16:33 -08:00
47ea51ec34
Allow both aui-manager-based infobars and window overlay infobars.
2020-12-22 21:36:39 +00:00
e7f9f19469
Tie dimension properties together for better comprehension.
2020-12-22 16:03:20 +00:00
8aedc33a6b
Fix typo calling directory_open_xpm on macOS.
...
Fixes #6809
2020-12-22 09:52:27 -06:00
93dc7feea3
Remove multi-threading for footprint loading.
...
Also don't load the footprints up front. The whole purpose of the
footprint-info stuff is to have enough info about the footprints to
filter them *without* loading. After that just load individual
footprints as we need them.
Fixes https://gitlab.com/kicad/code/kicad/issues/6177
2020-12-21 22:03:24 +00:00
5d4042d6b0
Don't check edge cuts visibility when getting board bbox from edges.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6805
2020-12-21 19:47:36 +00:00
6848b1055e
Make sure sorting is honoured on first display.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6295
2020-12-21 19:47:36 +00:00
eb7dc6ddd9
Minor fixes. In stand alone show the frame as soon as possible.
...
Especially when running Pcbnew to open a complex board the frame is shown faster.
Add also a busy cursor when loading files and building the data.
2020-12-21 17:44:10 +01:00
090d7881e0
Revert Coverity fix that caused build issue with older versions of Boost.
...
The Boost entropy exception does not exist prior to version 1.67. Once
the minimum Boost version is raise to 1.67 or greater, enable catching
the exception. We will just have to live with the possibility of an
uncaught exception until then.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6804
2020-12-21 08:41:05 -05:00
32f1e79c28
Pcbnew: Fix ctrl-MMB double click to perform 'Zoom to Objects'
...
CHANGED: Ctrl-middle mouse button double click should perform
'Zoom to Objects' in Pcbnew, but a change in modifier key handling
broke it. This MR restores the functionality.
Fixes https://gitlab.com/kicad/code/kicad/issues/6740
2020-12-20 23:20:09 +00:00
70c397a9b4
Implement free vias fully
...
CHANGED: manually-placed (stitching) vias won't have their nets automatically updated
(unless the via is placed directly on a track segment)
CHANGED: stitching vias can be placed on footprint pads and pick up their nets
Fixes https://gitlab.com/kicad/code/kicad/-/issues/5484
2020-12-20 16:29:50 -05:00
cd162a8f58
Honour m_placingVia when avoiding collisions.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/3773
2020-12-20 20:36:19 +00:00
e8f38e3c18
Snap to footprint origin when dragging
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6633
2020-12-20 15:15:48 -05:00
81ce1a07ee
Fix a few issues with builtin color themes
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6754
2020-12-20 14:43:41 -05:00
71b446f43c
Fix overlay ordering for non-copper layers
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6211
2020-12-20 14:43:41 -05:00
f311831c27
Coverity fixes.
...
280252, 314742, 314745, 314747, 314755, 314756, 314757, 314758,
314935, 314936
2020-12-20 13:24:47 -05:00
dc1c80beb8
Allow highlighting from locked items
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6758
2020-12-20 11:24:19 -05:00
ac793618f9
Set start item for inline dragging so that snapping works properly
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6796
2020-12-20 11:13:09 -05:00
a6e595dbda
Don't start dragging unselected zones from their filled areas
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6795
2020-12-20 10:41:02 -05:00
46314f6483
Only compare collision-corrected routes when looking for shortest.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6511
2020-12-19 23:20:27 +00:00
c8be87a654
Add i18n flag to appearance controls and selection filter
2020-12-19 17:39:43 -05:00
7c2b66fc2a
pcbnew: make pane labels translatable
2020-12-19 22:25:50 +00:00
d9bbdffd99
Don't offer point-based pad editing in PCBNew.
2020-12-19 19:51:51 +00:00
e840e9d997
Use themeable colours for snap helpers.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6664
2020-12-19 19:51:51 +00:00
247064a1ed
Remove rogue file from pcbnew's cmake
...
This is already provided in common and isn't pcbnew conditional (anymore)
2020-12-19 10:51:00 -05:00
9b0a137d6c
Stop bludgeoncompiling dialog_page_settings
...
Through the power of OOP!
Needs some more cleanup though
2020-12-19 10:40:37 -05:00
fc272f407a
Write the fp-info-cache if we close the footprint editor
2020-12-18 22:56:01 -05:00
4788f3ae6b
Read fp-info-cache on first start of fp editor
...
if fp info list is not initialized
2020-12-18 18:56:36 -08:00
e37a89cdbf
Disable the zone display types if zones are hidden
...
This prevents user confusion (a little) when the zones are hidden
Fixes https://gitlab.com/kicad/code/kicad/issues/6783
2020-12-18 17:22:51 -08:00
06d4476d7a
Fix graphics snapping in Footprint Editor.
...
Also improves the help text for the various selection modifier
options.
Fixes https://gitlab.com/kicad/code/kicad/issues/6538
Fixes https://gitlab.com/kicad/code/kicad/issues/4745
2020-12-19 00:21:28 +00:00
06aa1506ee
Add optional project parameter to PCB plugin load method.
...
The optional PROJECT parameter is primarily used for third party plugins
that need to store project information loaded by the plugin.
2020-12-18 10:40:51 -05:00
01f6c90fac
BOARD_CHANGED is only called after the previous board has been freed.
...
There is therefore no reason to remove the listener (and every reason
not to try).
Fixes https://gitlab.com/kicad/code/kicad/issues/6666
2020-12-18 12:49:20 +00:00
b68b1692ec
Clean up some more user messages.
...
Mostly component -> symbol but also some I18N cleanup.
2020-12-18 12:49:20 +00:00
4bc12e7dcd
Don't include plotters_specific.h where not needed
...
This avoids some very large rebuilds when a plotter class is changed.
2020-12-18 07:21:59 +00:00
1c0d4ac02d
Simplify some error messages.
2020-12-18 00:30:26 +00:00
bb232e6ac6
Unify LIB_IDs now that both are stored in sexpr files.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6764
2020-12-18 00:30:26 +00:00
aab3c936f0
Move headers from common folders to appropriate include folders round 2.
2020-12-17 11:44:03 -05:00
e4b60b03d1
fp editor: fix incorrect initialization of arc center when edited by the
...
graphic item properties dialog.
The arc center (in local coordinates) was initialized before the actual
value was calculated.
Fixes #6772
https://gitlab.com/kicad/code/kicad/issues/6772
2020-12-17 16:32:10 +01:00
a6085fa88d
Consistency for gerbview toolbar icons and some other icon tweaks.
2020-12-17 14:02:23 +00:00
08cf9a1e20
Move headers from common folders to appropriate include folders round 1.
2020-12-17 08:12:18 -05:00
dcbe2413cc
Pcbnew: fix incorrect displayed value in polar coordinates.
...
Fixes #6771
https://gitlab.com/kicad/code/kicad/issues/6771
2020-12-17 11:21:24 +01:00
b425889a1a
fp editor: fix incorrect parent for a error message box
...
Fixes #6773
https://gitlab.com/kicad/code/kicad/issues/6773
2020-12-17 10:47:39 +01:00
3d68aa4b86
Make sure footprint editor uses the right config object
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6115
2020-12-16 22:07:35 -05:00
87b25936a0
Don't hide zone virtual layers in footprint editor
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6642
2020-12-16 21:47:31 -05:00
fc20eaa083
Fix some compiler and Coverity warnings
2020-12-17 00:30:22 +00:00
1ca75c8fda
Fix from code review for https://gitlab.com/kicad/code/kicad/-/merge_requests/562 .
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6747
2020-12-16 22:02:19 +00:00
08730cf952
pcbnew: search hits counting fix
...
Fixes #6747
2020-12-16 18:02:24 +00:00
acfbcb4beb
Make distinction between PCBNew-wide tools and Board-specific tools.
...
The old names were really hard to keep straight (even for me, who named
many of them).
2020-12-16 13:32:46 +00:00
b7875e4d41
Setup file_* icons
...
Don't use the same "post_*" icon in the treeview. The badge gives an
action that doesn't apply in the treeview.
Also renames different file blobs to the "file_*" prefix.
2020-12-15 14:48:09 -08:00
5f9ed2583c
Don't put up double lock confirmation dialogs.
...
Also removes EditToolSelectionFilter which was misused in more places
than it was used correctly. The original point of the client filter
was to move the logic to the point of use, which the
EditToolSelectionFilter sort of obviated anyway.
Fixes https://gitlab.com/kicad/code/kicad/issues/6751
2020-12-15 22:34:24 +00:00
2f49623579
Tweaks to Pcbnew RHS draw toolbar icons
...
- Improve contrast of ratsnest icons by removing blue
- Track icon: make blue as it is a board feature
- Muwave icon: remove handles, make serpentine blue, thicken and pixel align
- New, simplified zone and rule area icons
- Simplify draw tools by removing edit handles/guidelines - improves contrast
- Reorder draw tools in toolbar/menubar to make a little more sense
- Rotate measurement icon (ruler) to match bottom left -> top right
2020-12-15 02:25:22 +00:00
dad2e317e9
Modify edit text & graphics to use pencil
2020-12-14 17:03:35 -08:00
2142ad20b1
Draw FPText umbilical lines in themeable colour.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6664
2020-12-15 00:15:03 +00:00
4faa4931ae
Fix missing gerber icon.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6727
2020-12-15 00:15:03 +00:00
22a6b36257
Don't allow dbl-click to leak through to other tools.
...
This only applies if the tool doesn't handle properties (which also
handles double-click events).
Fixes https://gitlab.com/kicad/code/kicad/issues/6735
2020-12-14 22:15:43 +00:00
c1a74b427a
Translucent magnifying glass on footprint & library browser icons.
...
Also renamed.
2020-12-14 22:15:43 +00:00
dd3b5512ee
PANEL_SETUP_LAYERS:do not disable the button "Add User Defined Layer".
...
For boards having 2 or 4 layers this button was disabled, that make no sense.
2020-12-14 17:47:55 +01:00
3b35bfc0a5
Don't write out synthetic severities (they're headings).
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6726
2020-12-14 13:34:53 +00:00
4f5c764dde
Appearance manager icons: fix which is which
2020-12-13 16:48:22 +00:00
7695866a72
Fix typo
2020-12-13 11:14:09 -05:00
cc43b66daf
Icons: use correct size for open action in toolbar
...
Previously 16x16 was used
2020-12-13 16:10:26 +00:00
f225e95ffc
FIx BOARD class SWIG interface
...
Commit b1f0bf7
2020-12-13 11:55:10 +00:00
1db7ffad5e
Formatting.
2020-12-13 11:42:03 +00:00
7565f60a03
Swap wxFileInputStream/wxFileOutputStream for the buffered kind
2020-12-12 18:52:02 -05:00
2bf0eb1e3a
Add convert icon
2020-12-12 11:14:58 -08:00
dce4d04113
Add 24x24 size refresh icon
...
Previously 16x16 was being used alongside 24x24
2020-12-12 18:51:55 +00:00
bc484784fc
Make sure zones are triangulated for DRC.
...
Normally this happens as a side-effect of rendering them but if done
from a script (or test case) this won't happen.
Fixes https://gitlab.com/kicad/code/kicad/issues/6635
2020-12-12 15:27:46 +00:00
c0a9742b3a
Apply 0ef63aca47 to diff pairs.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6314
2020-12-12 03:43:41 +00:00
cf6f0b9b92
Use trash icon where appropriate
2020-12-11 17:05:11 -08:00
dd4298bb94
Coverity fixes: 280374, 313611, 313648, 313649, and 314720.
2020-12-11 13:29:52 -05:00
0ef63aca47
Don't reset tail when changing track width/via sizes.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6314
2020-12-11 17:58:36 +00:00
af841d1318
Pay attention to flashed layers when doing DRC layer switch.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6710
2020-12-11 17:58:36 +00:00
224e33f8e1
DIALOG_TEXT_PROPERTIES: allows text rotation in 0.001 degree.
...
Fix also incorrect rotation (truncation) when displaying info in message panel
fot texts and pads.
2020-12-11 16:26:58 +01:00
7cb2d19814
Honour alt-means-disable-grid-snapping in router.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6679
2020-12-11 13:11:47 +00:00
d304f12284
Formatting.
2020-12-11 12:48:04 +00:00
73b7b104cd
Fix some issues with Infobar sizing.
...
This also commits to the new strategy as it wasn't really compatible
with if-def-ing anymore.
2020-12-11 12:39:40 +00:00
525934881f
Use a temp file for saving the fp-info-cache for now
2020-12-10 23:07:49 -05:00
dd0ad8f3a1
Read the fp-info-cache on pcb file load rather than on frame open
...
Otherwise in standalone mode pcbnew will never load the cache files and also later erase them :/
2020-12-10 21:34:40 -05:00
0967995a80
Replace wxTextFile for writing fp info cache
...
wxTextFile uses wxFile which uses write syscalls which means its unbuffered.
This makes file IO more expensive against network shares where it will flush far too aggressively.
wxTextFile is fine for reads however.
2020-12-10 21:34:40 -05:00
6898dadd1c
Don't activate measure tool when it's already running.
...
In this case it's reactivated when the move command ends; only the
move command was ended because of activating the measure tool so it
gets activated twice.
Fixes https://gitlab.com/kicad/code/kicad/issues/6321
2020-12-10 22:14:52 +00:00
98330098ac
Yet another overhaul to locking.
...
This unifies everything under a single architecture with a "don't
show again" dialog. Since everything now goes through the same
path it should be reasonably easy to make it do whatever we want
in the future.
Right now it presents 3 options: modify only unlocked items, override
locks and modify all items, or cancel command.
2020-12-10 17:36:19 +00:00
260219b0e6
CADSTAR PCB Archive Importer: Fix arc and filled shapes in footprints
...
- Need to call the PCB_SHAPE version of SetAngle in order to set the global coordinates for m_ThirdPoint
- Fill shapes also if in a footprint
2020-12-10 14:35:37 +00:00
a4879e740a
Don't request a full frame refresh when editing text properties (stop apperance flickering)
...
Seems like dead code, the commit should trigger just a canvas refresh.
2020-12-09 21:14:48 -05:00
9113f93ebe
Uniformly apply current locking strategy.
...
I make no claims that this is the right strategy, but at least it's
consistent now.
Fixes https://gitlab.com/kicad/code/kicad/issues/6369
2020-12-10 01:34:37 +00:00
90d58c8509
Fix typo. (Thanks Graham!)
2020-12-10 00:08:05 +00:00
bb4aa15736
Remove extraneous msgpanel update
...
OnModify right above also calls UpdateMsgPanel
2020-12-09 18:41:43 -05:00
be4b6ec06a
Cleanup compiler warnings
2020-12-09 23:13:33 +00:00
c6b17a0175
Enable lock menu for all selections.
...
It doesn't pay to try and be too smart as it just confuses people.
When the bugs come in that it doesn't dim I'll just be marking them
as "as designed". :)
Fixes https://gitlab.com/kicad/code/kicad/issues/6367
2020-12-09 22:19:06 +00:00
df4f4560be
Change lock toggle to put selection in uniform state.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6367
2020-12-09 22:19:06 +00:00
65782d5c5a
Move delete-again-to-delete-locked-objects to hypertext in infobar.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6367
2020-12-09 22:19:06 +00:00
e0fb12488b
Pcbnew: fix more minor text properties dialog layout issues.
2020-12-09 09:18:55 -05:00
eb2472650c
Filter appearance control updates on bulk changes
2020-12-09 08:01:37 -05:00
ad02156aea
Pcbnew: fix minor text properties dialog layout issues.
2020-12-09 07:58:32 -05:00
ad1aae40ec
Unify the saved file strings
2020-12-08 19:49:47 -05:00
fbc70511c7
GTK-require two-step in dataview
...
The before reset needs to be called in GTK prior to reseting the tree
otherwise, we will dereference items that may be cleared.
Fixes https://gitlab.com/kicad/code/kicad/issues/6672
2020-12-08 16:42:28 -08:00
431c8dba3c
Adjust undo when deleting members of a group.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6678
2020-12-09 00:18:36 +00:00
5e9d9f5753
Special handling for presence of Ref or Value in groups.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6677
2020-12-09 00:18:36 +00:00
799e1efba2
Update group icons
2020-12-08 12:22:18 -08:00
b26a5972c5
LIB_TREE's SetFocus() override no longer getting called.
...
The KIPLATFORM stuff forces focus, but not through the SetFocus()
call.
Fixes https://gitlab.com/kicad/code/kicad/issues/6657
2020-12-08 17:46:10 +00:00
ac684ac7a3
Fix minor compil warnings.
2020-12-08 18:28:03 +01:00
9c4eef2cef
Fix a missing view update when loading a footprint from the fp viewer.
...
For some reason, a footprint loaded from the fp viewer did not have its
view parameters fully updated (view bounding box not moved to the right place).
The fix ensure these parameters are updated.
2020-12-08 17:52:30 +01:00
b1f0bf7334
More consistent naming.
2020-12-08 13:05:39 +00:00
60ecd4698c
Nets don't have properites; netclasses do.
2020-12-08 13:05:39 +00:00
20ad2bee2f
Naming conventions.
2020-12-08 13:05:39 +00:00
9407e6dc83
Another set of color msgpanel items stripped
2020-12-08 00:52:21 -05:00
cbda1d7bf1
Remove more vestiges of old colored msg panel messages
2020-12-08 00:50:25 -05:00
97b5cff5fe
Remove redundant message panel SetMsgPanel
...
SetMsgPanel( m_pcb ) proceeded to erase and recreate the msg panel anyway...
2020-12-08 00:35:37 -05:00
b45eb56ddf
Cleanup some msg panel usage using the no longer support colors
...
The color was being passed to the aPadding param now.....
2020-12-08 00:34:36 -05:00
abb5cb8310
Fix up msg panel status on save slightly
...
- pcbnew should use status bar on success like eeschema
- Add a helper to clear msgpanel and set it in one go to avoid redraw delays due to doing processing in between
2020-12-08 00:28:07 -05:00
d7154c4334
Skip no_connect_ nets in the appearance widget
2020-12-07 22:11:53 -05:00
e88d41f764
Add bulk add/remove mode flag to the BOARD_LISTENER
...
This attempts to fix performance when importing large changesets from schematics.
The appearance control is a BOARD_LISTENER that would otherwise redraw per item imported which may cause lockups
2020-12-07 22:04:13 -05:00
1f3cdffe6b
Fix clipping of optimizer slider on OSX.
2020-12-08 00:13:29 +00:00
aa3e29ee7c
Don't re-enter router on subsequent X key.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6656
Fixes https://gitlab.com/kicad/code/kicad/issues/4504
2020-12-08 00:13:29 +00:00
588fd5e267
Better fix than 86b631b3
2020-12-07 18:28:32 +01:00
c7bd8fc987
A couple of missed "footprint" terminology updates.
2020-12-07 15:50:04 +00:00
78129aabeb
Fix another case of 413ff4525b.
2020-12-07 14:25:55 +00:00
86b631b31e
Fix incorrect use of ShowQuasiModal instead of ShowModal.
...
Fixes #6653
https://gitlab.com/kicad/code/kicad/issues/6653
2020-12-07 14:20:38 +01:00
d0f9503ee0
Add grouping for violation severities.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6616
2020-12-06 19:14:48 +00:00
58afaeb9eb
Use QuasiModal in all parents of ConfigPaths so help window works.
2020-12-06 18:44:24 +00:00
b10aa230f7
Remove no-longer-used DRC violation code.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6616
2020-12-06 15:19:33 +00:00
2260597236
Fix more accidental event capturing.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/5844
2020-12-06 13:33:23 +00:00
16c92f4134
Fp editor: Add a tool tip in the vertical toolbar
2020-12-06 13:35:21 +01:00
f09ca9ceee
Pass unhandled events when dragging in the router tool.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6630
2020-12-06 12:30:29 +00:00
602476cdf2
Update SELECTION_TOOL when loading footprint editor settings.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6641
2020-12-06 12:13:16 +00:00
68947864a1
Update zone layers along with corresponding copper layers.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6613
2020-12-05 23:31:12 +00:00
de082e9be7
Make footprints mostly covered in pads easier to select.
...
If all the uncovered space is at the very edge it doesn't feel like
there's anywhere to click but the disambiguation menu doesn't come
up.
Fixes https://gitlab.com/kicad/code/kicad/issues/6584
2020-12-05 23:02:45 +00:00
dbf273d5ec
Don't leave HOLE_PROXY set; it messes subsequent tests.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6584
2020-12-05 19:44:02 +00:00
4c5567a627
Allow colliding pads in netties as well as graphic shapes.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6584
2020-12-05 19:44:02 +00:00
d6c3c6f7fa
Use footprintRect not ViewBBox for determining footprint bounds.
2020-12-05 19:44:02 +00:00
d43eefbad5
Formatting.
2020-12-05 19:44:01 +00:00
3704c1cdb7
New icons for v6
...
Fixes https://gitlab.com/kicad/code/kicad/issues/2542
2020-12-05 11:17:15 -08:00
f53958dd54
Pcbnew, PANEL_EDIT_OPTIONS: add helper messages to display info about LMB
...
click and the modifier keys actions.
2020-12-05 16:04:42 +01:00
63088e8bdb
Pcbnew: fix incorrect size of solder paste rectangular area of rect pads.
...
When the solder paste margin was the same for X and Y directions, the margin
was not taken in account (missing code)
Fixes #6621
https://gitlab.com/kicad/code/kicad/issues/6621
2020-12-05 11:51:08 +01:00
4e100b8d03
Handle groups in clearance report, and make sure zone bboxes are cached.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6571
2020-12-04 20:49:14 +00:00
4634802a58
Formatting.
2020-12-04 19:29:04 +00:00
7b347d793b
Change gears on no-connect net generation. See bug rpt.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6534
Fixes https://gitlab.com/kicad/code/kicad/issues/6615
2020-12-04 18:25:48 +00:00
f3e1ac8dbe
Defensive code to prevent lookup of stale parent board.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6618
2020-12-04 14:01:54 +00:00
fd5e1fbdd4
Formatting and cleanup.
2020-12-04 14:01:54 +00:00
2f3ca60c5e
Pcbnew, modifiers for left click behavior: re-add highlight net option.
...
Due to last changes fixing the ALT key problems, the highlight net is
CTRL+SHIFT + left click on Windows and Linux
CTRL+ALT + left click on OSX
Fixes #6595
https://gitlab.com/kicad/code/kicad/issues/6595
2020-12-04 10:25:05 +01:00
09bfb76545
Make sure dissallow constraints get added to rule.
...
Also improves some error reporting.
Fixes https://gitlab.com/kicad/code/kicad/issues/6566
2020-12-03 23:08:51 +00:00
e882753ebf
Grid snapping fixes.
...
1) Uniformly honour the GAL grid snap settings
2) Make more uniform use of GRID_HELPERs
3) Smarten EDIT_LINE for mid-point snapping
Fixes https://gitlab.com/kicad/code/kicad/issues/6558
2020-12-03 19:55:58 +00:00
43fe228367
Hook up a bit more of the EE_GRID_HELPER.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/5985
2020-12-02 23:18:33 +00:00
00edc85f4f
Allow layer switching when routing from pad.
...
Additionally, don't process layer events from both main loop and
transitions -- it makes for a mess.
Fixes https://gitlab.com/kicad/code/kicad/issues/4832
2020-12-02 21:17:56 +00:00
f2ac6fcd44
Treat net 0 items as each being in their own net.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6534
2020-12-02 20:05:47 +00:00
d06d35a74d
Formatting.
2020-12-02 20:05:47 +00:00
64f555079a
Code cleanup related to zoom:
...
- remove outdated code or comment coming from old drawing code using wxDC
- move zoom values lists to zoom_defines.h
- fix incorrect zoom max and min values (gal scaling factor limits).
2020-12-02 18:35:28 +01:00
fcce62f0a4
cleanup related to zoom definitions
2020-12-02 18:35:27 +01:00
96c9680922
Separate width adjustments between single track and diff pair.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6572
2020-12-02 16:24:33 +00:00
71ab42e60a
Minor fixes and cleanup related to zoom definitions.
...
Mainly move 2 define relative to Zoom from convert_to_biu.h to zoom_defines.h.
Will make some changes/fixes in zoom code more easy.
2020-12-02 10:14:35 +01:00
1cd8426bcb
Fix latent dyn_cast bug. And a bunch of formatting issues.
2020-12-02 00:29:00 +00:00
f70153b849
Implement Group Properties in Footprint Editor.
...
Also fixes a pair of typos that were keeping delete of a group in the
Footprint Editor from working.
Fixes https://gitlab.com/kicad/code/kicad/issues/6579
Fixes https://gitlab.com/kicad/code/kicad/issues/6578
2020-12-01 23:43:53 +00:00
df262eaa06
Make prev/next marker work reliably on all platforms.
...
Requires us to move from arrow-keys to our own commands (the only
way that the OSX wxWidgets impl doesn't eat the keys when the dataVIew
has focus).
While there we might as well add a command to exlucde markers.
ADDED Prev Marker, Next Marker, Exclude Marker
Fixes https://gitlab.com/kicad/code/kicad/issues/6575
Fixes https://gitlab.com/kicad/code/kicad/issues/5501
2020-12-01 22:37:07 +00:00
3c521942ed
Smarten isEmpty checks to include nothing-but-whitespace.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6567
2020-12-01 16:39:06 +00:00
d50d1d84da
Fix some issue with group in selection logic.
2020-12-01 14:04:01 +00:00
288ab7ed6f
Minor formatting cleanup.
2020-12-01 14:04:01 +00:00
aa09418a14
Fixup memory lifespan of GAL options for the settings preview canvas
...
The canvas keeps a reference to the settings object, so we
can't pass one from the stack because it runs into lifetime
issues.
Also cleanup some loop-iterator problems.
Fixes https://gitlab.com/kicad/code/kicad/issues/6338
2020-12-01 01:12:07 +00:00
dadfe03804
Reinstate 5.1 net-tie hack since "real" net-ties got pushed to 7.0.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6556
2020-11-30 16:11:15 +00:00
7261086779
gendrill_file_writer_base: better algo to sort holes:
...
Holes were correctly sorted by size, but inside the same hole size
the holes were strangely sorted.
Now holes are sorted by hole size, and (inside the same size) by position.
Fixes #6553
https://gitlab.com/kicad/code/kicad/issues/6553
2020-11-30 16:59:13 +01:00
c66e373119
Cleanup of PCBNew message panel routines.
...
Also fixes bugs where invalid netclasses were reported as "Default",
and SMD pads were reported as having "0.0000" drills.
2020-11-30 14:38:06 +00:00
3a9a6e22bc
Fix issues in reporting netclasses.
...
1) make sure we get the default netclass when we want it
2) escape for HTML (particularly important for "<invalid>", but also
for reporting user rule names, netclass names, etc.)
2020-11-30 14:38:06 +00:00
3989c19c41
Don't test pad:track clearances in pad tester.
...
They've already been tested in the track tester.
Fixes https://gitlab.com/kicad/code/kicad/issues/6554
2020-11-30 14:38:06 +00:00
1f8b7b6149
Pcbnew: change block selection and heuristic context menu modifier keys.
...
Do not use the alt modifier key to force the display of the heuristic
context menu. This causes a conflict with menu selection on windows
and immediately dismisses the disambiguation context menu.
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/1873
2020-11-30 08:51:09 -05:00
e09271ca0e
Fixes for hole clearance and hole-to-hole tests.
...
1) Separate out CONSTRAINT types
2) Filter both source and dest pads/vias for drilled holes when doing
hole-to-hole checks. We were checking the items being put into the
DRC RTree, but not the items we were scanning.
3) Add hole clearance to Board Setup Constraints panel.
Fixes https://gitlab.com/kicad/code/kicad/issues/6546
Fixes https://gitlab.com/kicad/code/kicad/issues/4683
2020-11-29 23:35:23 +00:00
0c2cd1abb2
File left out of last commit.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6478
2020-11-29 21:21:20 +00:00
b171d381f0
Collapse Redraw3DView and Update3DView into a single routine.
...
Also fixes some errors about what the flag meant (model changed,
NOT redraw immediately).
Fixes https://gitlab.com/kicad/code/kicad/issues/6478
2020-11-29 21:08:30 +00:00
3ca06700fc
Formatting.
2020-11-29 20:00:16 +00:00
9322b3a4e1
Use the C++ isnan function
2020-11-29 11:30:45 -05:00
889408c96a
More improvements to new selection disambiguation.
...
Also a rationalization of text polygon generators, with the "standard"
version inherited from BOARD_ITEM now giving the bounding box. This
requires callers who want the (much) more expensive stroke-based one
to call it explicitly (and brings PCB_TEXT in line with the was FP_TEXT
already was.
Fixes https://gitlab.com/kicad/code/kicad/issues/6525
2020-11-29 14:02:46 +00:00
3c25abbf2f
Ignore netcode when expanding track selections.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6529
2020-11-29 10:57:45 +00:00
becc811775
Make path substitutions grid read only in lib table dialog
...
Fixes https://gitlab.com/kicad/code/kicad/issues/5624
2020-11-29 09:51:53 +00:00
f78d909ffb
Correctly set up projects for converted boards
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6209
2020-11-28 22:46:05 -05:00
5e117bfaa5
Don't allow nan values for dxf text alignment points to creep in
...
Literally the only place dxflib decides to default to NaN....
2020-11-28 20:13:42 -05:00
cc7264c0b9
Subtract off the block's base point coordinate from the insert translation
2020-11-28 20:13:42 -05:00
cac0d93dfd
Implement DXF INSERT scale
...
This has a chance of being wrong due to how the dimensions are stored in these intermediate objects
2020-11-28 20:13:42 -05:00
e4d0ffd607
Retire old SKIP_STRUCT filtering.
...
We already added the checkedPairs stuff which deals with a:b vs b:a
better, and the SKIP_STRUCT version had side-effects between the two
tests.
Fixes https://gitlab.com/kicad/code/kicad/issues/6539
2020-11-29 00:08:23 +00:00
0691e942f4
CADSTAR Archive Importer: Fix duplicate KIID for loaded elements
...
Don't use clone to copy an EDA_ITEM. Use Duplicate().
Even if you give the clone a new KIID, all its children will still be clones.
Create Duplicate() in LIB_PART
2020-11-28 17:18:17 +00:00
71f9847601
CADSTAR Archive Importer: Only load the Master variant
2020-11-28 17:18:17 +00:00
e3334cd25c
Non-KiCad Project importers: Do not rebuild the netlist or reannotate after import
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6383
2020-11-28 17:18:17 +00:00
78e3f917d9
CADSTAR PCB Archive Importer: Fix loading of old CADSTAR designs and Do Not Keep Upright
...
Older CADSTAR versions used 1/10 degree whereas newer versions use 1/1000 degree.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6437
2020-11-28 17:18:17 +00:00
f2ba9f7ac3
CADSTAR PCB Archive Importer: Correctly load the pad numbers as per the original design
...
To load the pad numbers correctly we need to also check the PART DEFINITION for each component
2020-11-28 17:18:17 +00:00
5db78a3d53
Fix typo in zone filling progress reporter. "insulated" -> "isolated"
2020-11-28 17:18:17 +00:00
d3c952b122
Commit pending changes from grids.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6527
2020-11-28 11:44:05 +00:00
b1adb93c16
PCB_GROUP_Ts need to be added and removed from view.
...
The SELECTION_TOOL's m_enteredGroup also needs to be updated when
said group is deleted via undo or redo.
Fixes https://gitlab.com/kicad/code/kicad/issues/6493
2020-11-27 23:34:58 +00:00
190197794d
Apply a similar fix as pads for B&W via printing.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6496
2020-11-27 22:31:07 +00:00
896ad4a749
Rewrite PCBNew selection disambiguation based on shapes.
...
The new shape architecture gives us the opportunity to make text
selection much more intuitive by actually looking at the glyph
shapes. Before text would be selected when you clicked in the
descenders area (which was usually blank given uppercase letters
and digits).
Fixes https://gitlab.com/kicad/code/kicad/issues/6525
2020-11-27 22:03:14 +00:00
0293f880ec
Fix a bunch of group issues with importing graphics.
...
Groups do not own their children; they only reference them. That
being said, they do own *selection* and *moving* of their children.
This might address some of 6493, but in any case will be a
pre-requisite for fixing it.
Fixes https://gitlab.com/kicad/code/kicad/issues/6493
2020-11-27 22:03:14 +00:00
0bbb7bdb0c
Allow selecting graphic footprints in high-contrast mode
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6490
2020-11-26 20:11:16 -05:00
6f3b0c452f
Make sure unfilled zones get an MD5 hash.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6515
2020-11-26 20:21:46 +00:00
06b9439dbf
Edge Cuts shapes have zero width.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6517
2020-11-26 17:42:46 +00:00
b3204a06fd
Minor layout improvements to Router Settings dialog.
2020-11-26 17:41:09 +00:00
fc2bdc49de
Once more into the depths of hell... er, I mean fix a focus issue.
...
So the new steals-focus protection stuff works well when there's a
focused control, but not as well when there's a modal dialog up which
happens not to have a focused control (or worse, a focusable control).
This adds a second mechanism for also checking to see if a modal dialog
is up (something that wxWidgets, true to form, makes very difficult).
Fixes https://gitlab.com/kicad/code/kicad/issues/6520
2020-11-26 16:47:40 +00:00
2a87980d45
Remove overly verbose messaging.
2020-11-26 16:47:40 +00:00
94de8ada97
Formatting and naming conventions.
2020-11-26 16:47:40 +00:00
09587ef4fb
Another attempt at GTK fix.
2020-11-26 00:05:57 +00:00
96acb12295
Attempt to fix GTK compile issue.
2020-11-25 23:07:49 +00:00
b8414174af
Duplicate Eeschema's select-ref-number strategy in PCBNew.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6504
2020-11-25 17:13:00 +00:00
7a2a302117
Fix several issues with pad/hole colors when B&W printing.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6496
2020-11-25 17:13:00 +00:00
5c08ad1ab9
Fix a few issues when copying a footprint from fp editor to clipboard, and paste it:
...
- ref and value texts were converted to user texts.
- fpid was left empty, thus creating a potential issue if pasted in the board editor.
Now:
- ref and value texts are no changed, and not copied is pasted in the footprint editor
(these texts already exist)
- a dummy fpid (clipboard:<md5 string>) is added if pasted in board editor
(Pasting a (partial) footprint from fp editor to a board editor is certainly not
a good idea but is possible)
2020-11-25 17:13:35 +01:00
68625494f3
specctra_export: fix an issue with custom and chamfered/round rect pads.
...
Is some cases a created pad stack name had the same name as an other pad stack
having a slightly different shape, thus creating pads with a incorrect shape on board.
Fixes #6495
https://gitlab.com/kicad/code/kicad/issues/6495
2020-11-25 13:57:46 +01:00
5607420339
Fix polylines being skipped in DXF blocks
2020-11-25 00:06:02 -05:00
d50d728d19
Cleanup compiler warnings
2020-11-25 00:08:09 +00:00
1cae0b6c08
Make sure board edges have 0 width.
...
When we divide up a rectangle or polygon (for better RTree usage)
we need to make sure the individual segments also have their widths
zeroed out.
Fixes https://gitlab.com/kicad/code/kicad/issues/6482
2020-11-24 23:49:28 +00:00
9c7c05c161
Mostly formatting cleanup but a few type-casting cleanups too.
2020-11-24 22:16:41 +00:00
31a26e7d25
Add missing GetEffectiveShape().
2020-11-24 22:16:27 +00:00
d1bddcf879
Implement GetEffectiveShape() for PCB_TARGET_Ts.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6488
2020-11-24 20:21:40 +00:00
2f3f4c209e
Make sure DRC reports a missing board outline.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6481
2020-11-24 14:22:27 +00:00
da0d89645f
Default to updating 3D models.
...
Also cleans up some user strings to try and make this clearer, and to help
translators make it clearer (neither of which is easy to do).
Fixes https://gitlab.com/kicad/code/kicad/issues/6475
2020-11-24 13:48:33 +00:00
272ec53e03
Make DXF import slightly prettier by copying text style width factor
...
It's impossible to replicate the original cad font style but replicating width factors at least
gives you something closer.
2020-11-24 07:15:49 -05:00
f64360e915
pcbnew, diff pair config save: fix truncation due to use of int instead double
...
Fixes #6477
https://gitlab.com/kicad/code/kicad/issues/6477
2020-11-24 09:30:31 +01:00
c07a38b91b
Fix MSVC compilation error with wxString fed to strtol
2020-11-23 21:26:20 -05:00
45598f2933
Add handling of DXF arbitrary axis/extrusions
...
This fixes some DXFs imports where unforunately CAD tools like SolidWorks
randomly decide to mirror circle definitions across the "z" axis (resulting in x or y axis flips in 2d)
Most likely live projection from 3D to 2D drawings introduces this.
However this is DXF specification to describe it so obtusely with vectors for a 2d drawing.
2020-11-23 21:24:38 -05:00
44f4d41bba
Fix member variable name
2020-11-23 21:24:38 -05:00
41aa97d0d2
Make translations a bit easier.
2020-11-23 22:09:15 +00:00
5f8a8c6850
Read/write "no net" (0) for pins with a no-connection marker.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/2273
Fixes https://gitlab.com/kicad/code/kicad/issues/5587
2020-11-23 19:47:55 +00:00
62e5500420
Cleanup dialog layout & punctuation.
2020-11-23 19:47:55 +00:00
32ec8fa928
Implement correct placement of DXF block contained entities
...
DXF blocks are virtual groups of items.
The insert entity is what actually places all the block contents at a given coordinate.
This should fix importing drawings from professional CAD tools like SolidWorks that will have a good bit of blocks.
2020-11-23 10:10:35 -05:00
bf59b422bc
Record blocks being received during the import
2020-11-23 10:07:30 -05:00
976c6262f4
French translation update (fix also trailing spaces in a few sentences)
2020-11-23 11:42:25 +01:00
b32c2a6c90
Refactor EDA_TEXT::TransformToSegmentList() to return a vector of points
...
This allows reading text object as it is rendered through python API.
2020-11-23 07:50:54 +00:00
51fcbe47a6
Remove colons from the import gfx dialog fields
2020-11-22 22:15:58 -05:00
90db12df2e
Rename the dxf units option to Default Units
...
The reality is the DXF file can still override the selected unit option which is totally fine.
In fact, per specification, there is a way to change units mid-file with block records :/
2020-11-22 22:15:58 -05:00
f5e9a2a6da
Use "microns" as the name to be consistent with DXF specification
2020-11-22 15:44:57 -05:00
88bee5e32f
Use the last used dxf units selection on dialog open
2020-11-22 15:44:36 -05:00
39fe89096e
Allow specifying the DXF file units on import
...
There is no guarantee DXF contains $INSUNIT to specify the units of the file as its optional.
This allows the user to specify the expected units via dropdown.
SolidWorks can definitely generate such unit lacking files as an example
2020-11-22 15:39:37 -05:00
c9524e707e
Don't load preferences from disk when init'ing PANEL_COLOR_SETTINGS.
...
It wipes out any changes that have been made in the SETTIGNS_MANAGER.
Fixes https://gitlab.com/kicad/code/kicad/issues/6339
2020-11-22 14:24:55 +00:00
2932fe1e64
Fix rotation of dimension objects.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6424
2020-11-21 23:53:06 +00:00
1391774f64
Re-factor boundary/courtyard checker error handling.
...
ADDED Footprint Checker dialog to display the results in.
Fixes https://gitlab.com/kicad/code/kicad/issues/6446
2020-11-21 20:57:35 +00:00
22bbe9618e
French translation update
2020-11-21 19:58:13 +01:00
f130970469
Handle lineweight in dxf import more properly
...
lineweights can be set to inherit from the layer or block.
2020-11-21 09:22:11 -05:00
ff3bd7e72a
Fix a crash bug in DRC, and equate Margin to Edge.Cuts.
2020-11-20 21:22:27 +00:00
b123318cf6
Encourage use of full DRC for board & footprint malformed outlines.
...
It shows much more detail. Removes some nag dialogs and places
hypertext links in others.
Also fixes the auto-layer-showing to correctly show Edge.Cuts or
F.CrtYd or B.CrtYd for errors relating to them.
Fixes https://gitlab.com/kicad/code/kicad/issues/6446
2020-11-20 17:24:52 +00:00
4bf79f2b90
Remove ddr3_length_match.py
...
The script is designed to be used with a particular board that does not
exist in the repository.
2020-11-20 08:10:53 +00:00
d59053b775
Fix dxf import making all circles filled
...
Filled objects in dxf is actually not handled at all, they are implemented as "hatched" objects
2020-11-19 21:00:53 -05:00
d7e10c22c6
dxflib_qcad: match rename of DimAngularData to DimAngularData2L
...
upstream 1655be6c7d58609397e9f04cfaff08336d69b20e
2020-11-19 19:19:59 -05:00
533d344e3f
Honour pad falshing when colliding with DRC RTree.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6443
2020-11-19 23:55:14 +00:00
0d850f98cd
Cleanup.
2020-11-19 22:48:18 +00:00
6e0c58adec
Include local clearances even if no implicit rule was found.
...
The real test should be to apply it any time an explicit rule is
*not* found.
Fixes https://gitlab.com/kicad/code/kicad/issues/6426
2020-11-19 22:48:18 +00:00
0517f783e1
Ease i18n of zone descriptions.
2020-11-19 22:48:18 +00:00
4e36036435
Avoid calculating on-endpoint hits
...
When hitting on a start/end point the arc may incorrectly be assigned as
not-connected when the angle does not wrap around from 0-360
Fixes https://gitlab.com/kicad/code/kicad/issues/6380
Fixes https://gitlab.com/kicad/code/kicad/issues/6380
2020-11-19 14:46:21 -08:00
9e9946628a
Go back to arrow cursor on a cancel (or finish).
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6421
2020-11-19 20:09:28 +00:00
203c860f01
Ensure better smoothing for zones clipped by board edges.
2020-11-19 18:34:30 +00:00
876b87b64e
Minor performance fixes for PCBNew selections.
2020-11-19 17:23:02 +00:00
04c84fa842
Remove some expensive trace calls.
2020-11-19 15:47:32 +00:00
18ad58cf4c
Replace legacy copper edge heuristics.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6435
2020-11-19 13:35:26 +00:00
99da663e82
Remove unused variables plus some more fixes from CppCheck
...
Remove unused variables plus a few more fixes from CppCheck
Remove unused variables plus a few more fixes from CppCheck
2020-11-19 02:28:47 +00:00
0e44f5128c
Add const specifiers
2020-11-18 19:50:36 +00:00
c1d1c12b41
Simplify message panel code.
...
We've had the colours turned off for two releases now without any
screaming or gnashing of teeth, so it's time to clean up the code.
2020-11-18 17:32:40 +00:00
d3a72f73e3
Kicad: fix environment variable changes after running Pcbnew in some cases.
...
When pcbnew is built with python support, the env vars defined inside Kicad
(and used mainly in paths) are rewritten for the python environment.
Unfortunately, the values are rewritten as UTF8 string, but in Kicad they are
just expected in utf32 unicode values.
This is now fixed by rewriting the initial values in Kicad env, after the
python environment is initialized.
2020-11-18 17:33:58 +01:00
16e3e59495
Split out arrayDim and MIRROR templates from macros.h
...
These were not macros
2020-11-17 20:21:04 -05:00
024812e5dd
Resolve legacy netclass definitions read from PCB file.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6415
2020-11-18 00:17:07 +00:00
bb3cbe3fa4
Pretty-up report a bit.
2020-11-18 00:17:07 +00:00
54427fd594
Make sure deleted text items are removed from view and selection.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6407
2020-11-17 20:48:15 +00:00
bfc4afc506
Restore the 5.1 NetTie hack.
...
We really need to do first-class net ties....
Fixes https://gitlab.com/kicad/code/kicad/issues/6416
2020-11-17 20:07:21 +00:00
795e45836d
Fix assert in DRC.
2020-11-17 17:41:57 +00:00
b2d86ec7c9
Don't double-check DRC clearances (a:b and b:a).
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6417
2020-11-17 16:58:39 +00:00
a207bd97bb
Naming conventions.
2020-11-17 16:05:49 +00:00
dff5173baf
Exorcise some instances of "modedit".
2020-11-17 16:05:48 +00:00
a431fd99ca
Fix crash when converting a Eagle board to a Kicad board.
...
During conversion a illegal layer number was used without filtering
2020-11-17 10:23:44 +01:00
7d1a4a4224
Add version information to footprint sexpr files and clipboard
...
This allows the parser to properly interpret the sexpr version
of the footprint so that it can throw future format errors or
do version specific parsing properly.
2020-11-16 23:19:09 +00:00
7933935b4a
Naming conventions.
2020-11-16 00:04:55 +00:00
f21e308830
Tweak fill logic to also catch filled primitives in custom pad shapes.
2020-11-15 23:14:46 +00:00
ceb51bb103
pcbnew: Only write fill flag for circles, rectangles and polygons
...
The other shapes don't have the same concept of being filled
(their fill is only a viewing mode, not an actual saved property).
2020-11-15 22:03:59 +00:00
8c08b861ab
Cleanup some compiler and Coverity warnings
2020-11-15 21:41:38 +00:00
b31e97cfed
Fix FP/PCB_SHAPE fill sexpr syntax to be backwards compatible
...
Previously the fill for shapes inside a footprint was not being
properly imported from older versions becase the default of no
flag changed from representing filled to representing no fill.
Introduce explicit filling information, and continue to treat no
flag on a polygon as meaning it is filled (which is the legacy
behavior).
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6393
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6390
2020-11-15 21:28:27 +00:00
114621eb2c
Move footprint shape offset/rotation stuff to the right place.
...
Most shapes are already offset/rotated (with thier non-offset/rotated
points in start0, etc.).
2020-11-15 21:04:12 +00:00
1ce1e493d6
A rule zone is not really a BOARD_CONNECTED_ITEM.
...
Or at least it shouldn't always be treated as one.
Fixes https://gitlab.com/kicad/code/kicad/issues/6382
2020-11-15 20:23:15 +00:00
b227d2b910
More component -> symbol.
2020-11-15 20:23:15 +00:00
42687a33ff
Terminology and layout cleanup in PCBNew Edit Options
2020-11-15 20:23:15 +00:00
61821f3ee4
GUI guidelines in PCBNew origin setup.
2020-11-15 20:23:15 +00:00
3f1a58bd06
Replace "module" with "footprint" in PCB sexpr.
2020-11-15 20:23:15 +00:00
9aa6e40b79
Eeschema, fields_grid_table.cpp: fix a crash when the eeschema settings are not available.
...
It happens if the svhematic is not open when opening the symbol editor.
Fix also a compil warning.
Fixes #6384
https://gitlab.com/kicad/code/kicad/issues/6384
2020-11-15 13:50:10 +01:00
e97faa6afd
No need for LAST if the compiler still barks anyway.
2020-11-14 22:02:22 +00:00
d094f86b1a
Finish module cleanup (except for xpms).
2020-11-14 22:00:12 +00:00
6e6f6a2d72
Use legacy boardThickness for via length when we don't have a stackup
2020-11-14 21:22:35 +00:00
61bca4aaa4
A bit of "module" erradication, nameing conventions, and formatting.
2020-11-14 21:21:54 +00:00
d2a88234b6
Fix issue deleting footprint libraries from table.
...
wxWidgets pageChanged handler is evidently buggy. Who would have
guessed?
2020-11-14 20:12:49 +00:00
666c11965a
Clean up some more MODULE terms.
2020-11-14 19:56:06 +00:00
7bd31d5237
Naming conventions.
2020-11-14 18:26:03 +00:00
2d001796a3
Take into account footprint rotation too.
2020-11-14 17:24:27 +00:00
2eb71447e4
DRC RTree fixes.
...
1) Don't collide against hidden text
2) Don't collide in both directions (a:b & b:a)
2020-11-14 16:59:34 +00:00
8bae52d1c3
Correct naming conventions.
2020-11-14 14:29:11 +00:00
74ad1562d9
Make FP_SHAPE GetEffectiveShape() relative to board, not footprint.
2020-11-14 14:15:02 +00:00
aa06de2db4
Legacy polygons on non-Edge_Cuts layers were always filled.
2020-11-14 14:15:02 +00:00
774a671b54
Fix footprint-relative coordinates when drawing polygons.
2020-11-14 14:15:02 +00:00
103dbb9fbd
Some fixes in python footprint wizards
2020-11-14 13:38:44 +01:00
28991ddf58
Rename D_PAD to PAD
2020-11-14 09:37:45 +00:00
54878b04a5
Rename MODULE to FOOTPRINT
2020-11-14 09:37:45 +00:00
a4650e7269
Rename GetModules to GetFootprints
2020-11-14 09:37:45 +00:00
dfddd19b17
French translation update.
...
Fix also a typo.
2020-11-14 09:02:36 +01:00
c58b3fe8a4
Fix a compil issue.
2020-11-14 08:51:21 +01:00
7265f84358
fix PAD::TransformShapeWithClearanceToPolygon() incorrect calculation in some cases.
...
For round rect pads, when the arc error was OUTSIDE, the shape was too big and creates
bad shape for chamfered round rect pads.
For chamfered pads, when the clearance value was not 0, the chamfer was not at the
right place.
2020-11-14 08:50:58 +01:00
b996c0d2f5
Fix typo in last commit
2020-11-13 22:16:23 -05:00
7fc19b7592
Turn off live resize in pcbnew on Windows
...
The performance of live resizing isn't great. Windows can send mouse moves at 1000 Hz which is faster than the complex appearance panel + canvas can paint properly.
2020-11-13 22:15:32 -05:00
ec020dd19f
First-class support for filled shapes.
2020-11-14 01:40:32 +00:00
86b6afd14b
More cleanup of MODULE to see if it fixes SWIG error.
2020-11-13 21:07:36 +00:00
47e86d76fb
Cleanup prior to adding filled flag.
2020-11-13 21:07:36 +00:00
18fac23c35
Fix python module build error.
2020-11-13 14:37:52 -05:00
34b13e66bf
Fix typo in SWIG stuff.
2020-11-13 17:55:54 +00:00
49402fe760
Keep track of COMPONENT -> FOOTPRINT map.
...
Changed footprints will still only be found in the COMMIT, so
searching for them in the board won't work.
Fixes https://gitlab.com/kicad/code/kicad/issues/6363
2020-11-13 17:55:54 +00:00
b29cd8e3a1
Rewrite EDIT_TOOL::FilletTracks to only carry out the operation when one item is connected to the anchors
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6103
2020-11-13 17:43:21 +00:00
498c4121b3
Fix and rename CONNECTIVITY_DATA::GetConnectedItems(aItem, aAnchor, aTypes[] ) to GetConnectedItemsAtAnchor
...
- Fix the function so it actually returns the connected items (previously it was returning aItem every time)
- Make the function const
- Rename the function so that it is not confused with the other function of the same name
- Add doxygen comments for the function
2020-11-13 17:43:21 +00:00
bdc89df333
EDIT_TOOL::FilletTrack Change STATUS_TEXT_POPUP messages to an infobar instead
2020-11-13 17:43:21 +00:00
bdbb68f813
MODULE -> FOOTPRINT.
2020-11-13 16:04:03 +00:00
3451ac3088
PCB_MODULE_T -> PCB_FOOTPRINT_T
2020-11-13 15:16:24 +00:00
63a54d003e
More module -> footprint.
2020-11-13 15:16:24 +00:00
522d64968e
Yet more module -> footprint.
2020-11-13 15:16:24 +00:00
9106cc19bf
Yet another tranche of module -> footprint.
2020-11-13 15:16:24 +00:00
2cc9dad4ff
More module -> footprint.
2020-11-13 15:16:24 +00:00
8c947b69b0
More module -> footprint.
2020-11-13 15:16:24 +00:00
fc9cf1d827
More module -> footprint.
2020-11-13 15:16:24 +00:00
52a46341db
More module -> footprint.
2020-11-13 15:16:24 +00:00
a3a9ef4f32
Naming conventions.
2020-11-13 15:16:24 +00:00
f5443de7f9
D_PAD -> PAD.
2020-11-13 15:16:24 +00:00
2bc004eb0b
Prepare for D_PAD -> PAD.
2020-11-13 15:16:23 +00:00
84dd5108ba
Remove some "class_" prefixes from files.
2020-11-13 15:16:23 +00:00
72beaf1538
Pcbnew, DIALOG_BOARD_REANNOTATE: fix some cosmetic issues.
...
Fixes #6370
https://gitlab.com/kicad/code/kicad/issues/6370
2020-11-13 08:59:23 +01:00
4d7aa2f9c9
Pcbnew, Pad properties dialogs: fix some issues related to chamfered rect shapes.
2020-11-12 20:13:28 +01:00
43a4cf7957
Coverity fixes.
...
CIDs 309391, 310711, 310712, and 313055.
2020-11-12 08:15:49 -05:00
1faee7fdce
Fix SWIG includes
2020-11-12 12:25:11 +01:00
fc8bf6f0fe
Allow a user to remap layers in Eagle import
...
ADDED Allow for user mapping of layers in Eagle import
ADDED Support required and optional layers in the layer mapping dialog
ADDED Add base class for plugins supporting remappable layers
2020-11-12 11:37:04 +01:00
f7333ad64a
Update some classnames including archaic zone names.
2020-11-12 10:31:25 +00:00
fb218e3c9b
Pcbnew: allows filled option ( 0 outlines width ) for graphic items rect and circle.
...
It was allowed inside editors, dialog properties and when saving the board file.
However it was not allowed when reading the file. It is now allowed.
Fixes #6355
https://gitlab.com/kicad/code/kicad/issues/6355
2020-11-12 09:01:08 +01:00
1e44172d40
Redraw all objects after Preferences in case colours changed.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6341
2020-11-11 17:52:15 +00:00
da5cfb5df1
Improve commenting.
2020-11-11 17:52:15 +00:00
c78c8aadcf
Pcbnew: fix incorrect tool tip.
...
Fixes #6356
https://gitlab.com/kicad/code/kicad/issues/6356
2020-11-11 18:39:28 +01:00
7a7719bf97
Pcbnew: layer stack up dialog layout fixes.
2020-11-11 12:02:11 -05:00
87da9271a4
Minor Pcbnew dialog layout fixes.
2020-11-11 11:08:54 -05:00
5e569e81e7
Performance enhancements for PNS.
2020-11-11 15:32:30 +00:00
Marek Roszko
Jeff Young
Seth Hillbrand
Jon Evans
Thomas Pointhuber
Ian McInerney
Wayne Stambaugh
Mikołaj Wielgus
jean-pierre charras
Michael Kavanagh
Roberto Fernandez Bautista
qu1ck
Barabas Raffai
Dominik Wernberger
Konstantin Baranovskiy
RigoLigoRLC
hoijui
Zoltan Gyarmati
Jeff Glass
Carlo Bramini
Allan Nordhøy
PJM
Jan Mrázek
Peter Montgomery
Adam Wolf
Alexis Lockwood
Cameron McQuinn
Graham Keeth
Simon Richter