911e013850
Pcbnew: Do not change visibility objects when changing Visibility layers
...
Fixes #13836
https://gitlab.com/kicad/code/kicad/issues/13836
2023-02-16 12:39:15 +01:00
9f10c142c4
Sync pcbnew selection with selected items after plugin is run
2023-02-16 02:29:06 +00:00
9d3f4bef6a
DRC: Verify overlapping layers in physical clearance
...
When checking the physical clearance on a layer, it is critical to check
that the via hole exists on that layer. Blind/buried and micro vias may
not overlap, so should be excluded from this check when they don't exist
on a particular layer
Similarly, we should only be reporting a single physical clearance error
for each item pair even though they may have multiple errors across
multiple layers in the case of via-via clearance
2023-02-15 11:35:24 -08:00
2032b8af59
Pcbnew: fix incorrect rotation of thermal spoke for rotated footprints.
...
If the footprint rotation is not a multiple of 90°, the thermal spokes
were not correctly rotated.
Fixes #13919
https://gitlab.com/kicad/code/kicad/issues/13919
2023-02-15 18:19:34 +01:00
40e1296a8b
Clear dirty flags after a move.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11362
2023-02-15 14:50:31 +00:00
2d7c5c5c0f
Router: Do not collide items within a net tie footprint
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/13909
2023-02-14 21:08:36 -05:00
473979d686
Fix handling of PPI when loading embedded images
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/13884
2023-02-14 19:42:06 -05:00
eb83f76bff
Allow plotting of multiple board layers per plot in Python.
...
Since the always plot the edge cuts layer option was deprecate,
the ability to plot multiple board layers was exposed through the
PLOT_CONTROLLER object.
Added the interactive plot information which was overlooked during
version 7 development.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/13841
2023-02-14 09:49:20 -05:00
4b07e3e413
Common Actions: Find Previous
...
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/8968
2023-02-14 08:21:37 -05:00
3e715c99c8
Swap: take S key now that it's available
2023-02-14 07:42:06 -05:00
e7fe69b97f
Better handling of vertex sorting
...
Nominally, the zcode of a vertex is unique. This is not 100% true,
however, as we must interlace two 32-bit numbers into a single 32-bit
number. Sorting needs to account for the possibility that the zcode
will be the same while other elements of the vertex are different. This
commit fixes the broken boolean logic to more clearly handle these cases
Fixes https://gitlab.com/kicad/code/kicad/issues/13867
2023-02-13 11:21:04 -08:00
8bab429c7d
Account for border when calculating text margin for text boxes.
...
Also fixes some unnoticed issues with the textbox dialogs (probably
dating from the move to wxWidgets 3.2).
Fixes https://gitlab.com/kicad/code/kicad/issues/13877
2023-02-13 17:08:29 +00:00
71b687622b
PCB Search Pane: activate item opens properties dialog
...
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/12475
2023-02-13 10:57:05 -05:00
17059971e8
DIALOG_UNUSED_PAD_LAYERS: do not use TransferDataFromWindow for any button.
...
TransferDataFromWindow is called only when closing by a wxID_OK button
Fixes #13865
https://gitlab.com/kicad/code/kicad/issues/13865
2023-02-13 10:26:46 +01:00
499b58f505
ADDED: user-specified gap and linewidth for bounding hull creation.
2023-02-12 23:16:45 +00:00
f409837d26
Fix a stray ternary hidden under #if
2023-02-12 16:46:34 -05:00
837ba323fb
Add doc link to custom rules syntax help.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13727
2023-02-12 21:34:35 +00:00
4665823089
Turn on and fix MSVC compliance mode issues
...
We want /permissive- to enable debug performance improvements in MSVC 17.5+.
This flag is also default under C++20 so we'll have to deal with these compile issues anyway at some point in the future.
In particular, MSVC becomes pedantic about ternary types.
See https://learn.microsoft.com/en-us/cpp/build/reference/permissive-standards-conformance?view=msvc-170#ambiguous-conditional-operator-arguments
MSFT cites https://cplusplus.github.io/CWG/issues/1805.html
2023-02-12 16:30:37 -05:00
2a5bb71fbd
ADDED operating point text variables for labels and symbols.
...
ADDED formatting for cursors and operationg points
Also fixes a bunch of bugs to make the new cursors work with .ac sims.
Fixes https://gitlab.com/kicad/code/kicad/issues/11253
Fixes https://gitlab.com/kicad/code/kicad/issues/6965
2023-02-11 21:11:07 +00:00
e73366db5c
Add 3D viewer to toolbar.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13559
2023-02-11 21:11:07 +00:00
aab237852b
Flatten Reannotation dialog.
2023-02-11 21:11:07 +00:00
0dcc34ddc8
Simplify Remove Unused Pads dialog.
2023-02-11 21:11:07 +00:00
362d85ef50
Special selection mode when in high-contrast with courtyard layer active.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13521
2023-02-11 21:11:07 +00:00
95fb3825bd
Fix some strings from V7's string freeze.
2023-02-11 21:11:07 +00:00
61dd4b7043
Properties: fix rebuilding when availability changes
2023-02-11 15:50:51 -05:00
0b3928d38f
Properties: add some validators for PAD
2023-02-11 15:50:51 -05:00
13391176ae
Remove DRC exclusions that no longer have items.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13802
2023-02-11 20:43:00 +00:00
4d6e06d349
Add grid reset to place menubar.
2023-02-11 13:20:35 -05:00
eb240fda9a
Properties: introduce validators; re-enable zone hatch settings
2023-02-11 11:44:58 -05:00
254168c788
Properties: introduce method chaining for initialization
2023-02-11 11:44:58 -05:00
6948a0bebd
Expose new netclass storage to SWIG
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/13337
2023-02-11 09:50:24 -05:00
b5191c8c22
Fail-safety in spreadRectangles.
2023-02-11 16:42:27 +03:00
b888714ed5
Don't discard temporary item being placed if placement is rejected
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/13697
2023-02-11 08:40:33 -05:00
e066454c61
Zones: use metric defaults and limits instead of mixed units
...
Update testcases to reflect new defaults
2023-02-11 07:39:29 -05:00
fda3feaf3f
Revert "Add doc link to custom rules syntax help."
...
This reverts commit 7874735810
2023-02-10 15:33:03 -08:00
90a388571e
Fix copy-pasta
...
testing 'othervia' for dynamic_cast success needs to use `othervia`
rather than `via` which might still be null
Fixes Sentry issue KICAD-5K
2023-02-10 13:33:21 -08:00
6fb9d190ac
Use the common subset of nets for local update
...
When adding new data, we may have differing sizes of the dynamic
ratsnest and our local copy, so ensure that we are only referencing
elements that exist in both
2023-02-10 12:50:29 -08:00
89429996da
Fix a crash in rectpack2D when unable to pack footprints.
2023-02-10 22:45:07 +03:00
f4825cdd8f
Allow same-net, same-priority zone filling
...
When two zones with the same net and same priority overlap, they should
both be filled, matching the behavior of v6. If you would like an
explicit override of one or the other, you need to set the zone priority
higher. Relying on the UUID as a tie breaker is good for zones with
different nets but creates unexpected changes from v6 when applying it
to zones of the same net
2023-02-10 11:07:08 -08:00
e2353a2849
PANEL_BOARD_STACKUP: Ensure UI is re-linked to storage when importing
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/13835
2023-02-10 12:58:04 -05:00
538ee12188
Pcb editor: fix crash when trying to activate the "place anchor" tool.
...
"place anchor" tool exists only in the Fp editor. However, the hotkey
to activate this tool was also active in the board editor. Now disabled.
2023-02-09 16:29:33 +01:00
92a61b187f
Properties: Hide zone fill type settings for now
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/13811
2023-02-08 21:56:15 -05:00
b71fa91bc4
Don't write outside of overrides array on pad zone_layer_connections.
...
Use std::array to catch future errors in Debug.
Fixes https://gitlab.com/kicad/code/kicad/issues/13803
2023-02-08 01:32:52 +03:00
a493a2c822
kicad-cli, pcbnew pàlot: honor the color options when ploting pdf files
...
--black-and-white and -t were shown in help, but not handled
Fixes #13805
https://gitlab.com/kicad/code/kicad/issues/13805
2023-02-07 20:20:45 +01:00
82d9176782
FOOTPRINT::Flip(): add missing PCB_BITMAP_T.
...
Fixes #13785
https://gitlab.com/kicad/code/kicad/issues/13785
2023-02-05 18:41:58 +01:00
f2f54fe926
Improve zone-layer-connections terminology and comments.
...
This makes it clearer that the overrides are not inverses of each
other -- one overrides the flashing state and the other overrides
the connection state (to other zones, not to everything).
Also fixes a bug where we were failing to check the force-no-connect
for pads.
2023-02-05 17:39:42 +00:00
c122fd0e36
Remove unused cache_optionally_flashed_connections.
2023-02-05 17:39:42 +00:00
f6fd85af85
CHANGED: Try to determine via/pad flashing state before filling zones.
...
If removing unused via annular ring option is enabled on a layer, then the via will have the ring if both:
- Via center is not inside a rule area with "Keep out copper fill" flag set
- Highest-priority zone the via hole intersects with has the same net
Pads will be flashed if:
- Pad center is not inside a rule area with "Keep out copper fill" flag set
- Highest-priority zone at the pad center has the same net
Fixes https://gitlab.com/kicad/code/kicad/issues/12964
2023-02-05 17:39:42 +00:00
bf1a8f2582
router: Fix clamp in meander corner radius calculation.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13781
2023-02-05 07:22:38 +03:00
a59c1afa53
Fix two bugs in RTree polygon collions special case.
...
1) Special case doesn't work for polygons with holes
2) Fix special case to handle intersecting lines where neither end is
in the polygon.
Note that only (1) is required for the bug below. (2) was just
discovered while implementing (1).
Fixes https://gitlab.com/kicad/code/kicad/issues/13779
2023-02-04 13:46:40 +00:00
6b5eeeb861
Preferences dialog: try to reduce its width, in non English languages.
...
Remove some useless spacers, and do not force some widgets to have a to
large size (by removing empty areas).
Work in progress: one panel is still too big.
2023-02-04 14:36:14 +01:00
887c740c2e
Limit the number of potential netnames
...
Don't set text if outside of the clipbox. Text is non-cached so will
get redrawn on zoom
Fixes https://gitlab.com/kicad/code/kicad/issues/13572
2023-02-04 11:17:09 +01:00
8ecf64b6c5
Don't run DRC rules on non-existant layers.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13753
2023-02-03 15:08:31 +00:00
235925d62c
Clearer reporting of negative clearances.
2023-02-03 15:08:31 +00:00
0d083d0230
AllCuMask() and AllTechMask() are static, they do NOT modify "this".
2023-02-03 15:08:31 +00:00
b427ad80f6
Don't make unneeded copies of std::pairs
2023-02-03 15:28:53 +01:00
dde336ee40
Split connectivity mutex locking
...
Internal routines have no need for locking the mutex they already own.
While external routines that want to recalculate the Ratsnest do need an
exclusive lock before being allowed access
Fixes https://gitlab.com/kicad/code/kicad/issues/13011
2023-02-03 15:26:19 +01:00
8ce0a84ca7
Fix compatibility with older wxWidgets versions.
...
Fix also a compil warning
2023-02-03 08:24:38 +01:00
e20c86ad5e
Minor dialog layout improvements.
2023-02-02 16:54:52 -05:00
e60152e351
Fix island removal when copper->edge clearance is 0
...
Just testing a single point to find copper that is outside the board works
until the arc->segment conversion moves the board outline just enough to
have the filled copper slightly (few IU) outside of the converted outline.
Instead, we do an expensive check of comparing the size of the
intersection between the island and the island's intersection with the
board. If the intersection is at least half as large as the original
island, we can say with certainty that the island is inside. The margin
could be much smaller than half but this preserves the intent without
picking an arbitrary number that might be violated
Fixes https://gitlab.com/kicad/code/kicad/issues/13717
2023-02-02 19:19:26 +00:00
fcefb5f86d
Re-allows selection of bitmaps not owned by a footprint.
...
It was broken by my commit f8051d95Fixes #13747
https://gitlab.com/kicad/code/kicad/issues/13747
2023-02-02 18:09:37 +01:00
200bf696af
Fix importing of legacy netclasses
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/13746
2023-02-02 08:29:43 -05:00
737318a24d
struct ZONE_DESC: ensure ENUM_MAP<PCB_LAYER_ID> is initialized before use it.
...
ENUM_MAP<PCB_LAYER_ID> is tested initialized in some other XXX_DESC,
but not in ZONE_DESC
Fixes #13699
https://gitlab.com/kicad/code/kicad/issues/13699
2023-02-02 09:11:27 +01:00
26b9d2f5ac
DRC: Allow disabling DP constraints in specific areas
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/13743
2023-02-01 23:11:39 -05:00
7874735810
Add doc link to custom rules syntax help.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13727
2023-02-01 23:40:53 +00:00
6543d23d9f
router: Re-add electrical path lines drawing for length tuning.
2023-02-01 20:36:52 +03:00
7d6218acb4
Unify checkbox borders in Interactive Router Settings.
2023-02-01 07:46:42 +03:00
1c2345776e
Remove unused variable.
2023-02-01 07:28:55 +03:00
48e4005111
Fix diff pair router checking of min clearance
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/13720
2023-01-31 19:53:35 -05:00
68eac74458
pcbnew: Fix strokeWidth truncation to integer mm in SVG polygons import
...
The polygon conversion algorithm mistakenly stored the stroke width of
filled polygons in an integer variable. As a result, all stroke widths
were rounded down to the next smaller integer mm size. This commit changes
the types in the relevant functions and variables from int to double.
2023-01-31 20:34:25 +00:00
f34aa947d3
Allow on-outline zones to be considered inside
...
Also ensure that calculated areas for island removal are absolute.
The on-outline zone can happen when the clearance to the edge is
particularly small.
Fixes https://gitlab.com/kicad/code/kicad/issues/13717
2023-01-31 12:32:23 -08:00
f8051d954a
Better handling of PCB_BITMAP items in a footprint.
...
- Ensure they can be erased in the FP editor
- Ensure they cannot be selected in the PCB editor (they are not show)
Fixes #13714
https://gitlab.com/kicad/code/kicad/issues/
2023-01-31 11:16:38 +01:00
44cfb1ea43
CADSTAR PCB: Don't create zero sized text items
...
Partially addresses https://gitlab.com/kicad/code/kicad/-/issues/13693
2023-01-30 19:56:22 +00:00
963e82ee7f
CADSTAR PCB: Correctly handle anticlockwise arcs
...
Also add some qa tests for EDA_SHAPE::SetAngleAndEnd
Fixes https://gitlab.com/kicad/code/kicad/-/issues/13626
2023-01-30 19:56:22 +00:00
50e9685490
Check for tented vias before expanding solder mask.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13705
2023-01-30 17:56:35 +00:00
ce06171561
Convert additional sprintf to snprintf
2023-01-30 16:22:03 +00:00
e928d72c3b
Fix relative step file export
...
Forgot to set the project relative path, and the library search path
Fixes https://gitlab.com/kicad/code/kicad/-/issues/13696
2023-01-29 22:19:37 -05:00
5bdaf20af6
eagle: determine and use the minimum copper layer stackup count
...
Fixes: https://gitlab.com/kicad/code/kicad/issues/13484
2023-01-29 21:13:41 +00:00
971abcfc1a
Fix DP meander placer when tuning from an uncoupled section
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/12212
2023-01-28 22:25:46 -05:00
68decdd4f2
Fix static event table derived object definitions.
2023-01-28 14:10:06 -05:00
d4a5e2caad
Fix crash when .kicad_pcb is renamed to .kicad_mod and load library attempted
...
Pick a random error message used elsewhere
2023-01-28 10:42:46 -05:00
d04cda35c5
Handle hidden attribute in fp-lib-table
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/13689
2023-01-28 09:23:25 -05:00
b1018e8eeb
Relax no-zone-commands constraint on interactive placer tools.
...
These tools are initialized with an item (via/pad/microwave) so there's
no way to tell between during-placement and idle. Besides, they don't
update the ratsnest so they probably won't fall afoul of the original bug
(https://gitlab.com/kicad/code/kicad/-/issues/12736 ).
Fixes https://gitlab.com/kicad/code/kicad/issues/13686
2023-01-28 10:42:24 +00:00
4d811ba975
Enable layer arg for fp export svg
2023-01-27 23:45:42 -05:00
b4994a7fa1
Locked shadows should not be on overlay
...
These are supposed to render under the component
and do not need to be pulled to the front for overlay.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/12486
2023-01-27 22:09:42 -05:00
51c8f2c119
Fix library sort order in library viewers
...
The lib table returns a properly sorted list of libraries already, which
we just iterate through. A std::set is a sorted collection, but uses a
different sorting function than the lib table, so appending to a
std::set breaks the initial sorting that was done already.
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/13530
2023-01-27 23:39:50 +00:00
f6dc48ead7
Pcbnew: Make "Substitute similarly named models" on by default in STEP export.
2023-01-27 23:32:23 +00:00
a3e3231605
Pcbnew: Increase the default size of the board setup dialog
2023-01-27 22:00:39 +00:00
8603c06ef3
Fix netnames.
2023-01-27 19:35:41 +03:00
13ce2ebf46
15% rendering optimization in PCB_TRACK::ViewGetLOD.
2023-01-27 18:37:43 +03:00
8268234aa1
Reverse shown-source logic so we report if it's the netclass width.
...
(whether or not it's *also* the previous track width).
2023-01-27 15:31:02 +00:00
675b6b5d5c
Fix logic error in ec4d377d
...
Also fixup goldens for importers for new default island mode
2023-01-27 10:16:56 -05:00
ec4d377d15
Stop removing islands for fully-isolated zones
...
It is hard for a user to tell what is going on when their zone
just doesn't fill at all. We catch isolated areas in the DRC so
we can just leave them alone here until the zone has at least one
non-isolated filled area.
Also change default back to always remove islands to reduce confusion
Fixes https://gitlab.com/kicad/code/kicad/-/issues/13271
2023-01-27 08:57:18 -05:00
e3fa447f0c
router: Remove extra qualification.
2023-01-27 11:56:23 +03:00
0ff6cb49d6
router: When dragging tracks, don't snap to parts of the original line.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10113
2023-01-27 11:06:36 +03:00
52edbf91dc
Better synchronization of various ratsnest visibility controls.
2023-01-27 10:01:12 +03:00
a872ed11bf
Fix paths for Copy default global library table.
2023-01-27 09:24:52 +03:00
a0236113da
Attempt fix to RATSNEST crash
...
We call 'RecalculateRatsnest' in multiple locations, this will
invalidate various pointers needed by VIEW::Redraw(). When this is
called through the normal connectivity routines, we have the mutex
locked to prevent conflict but we've added more locations that update
just the Ratsnest. The std::adopt_lock should take over the existing
lock when needed
Fixes https://gitlab.com/kicad/code/kicad/issues/13011
2023-01-26 17:32:38 -08:00
ec9e7eed90
Don't link DNP with Exclude from Pos files
...
Exclude from Pos file property follows the footprint but may be
different from the DNP property
Fixes https://gitlab.com/kicad/code/kicad/issues/13616
2023-01-25 13:54:12 -08:00
a6badd0313
Fix compile warning
2023-01-25 13:53:13 -08:00
2312cf34c4
Pay attention to knockout text when adding to DRC Rtrees.
2023-01-25 18:34:03 +00:00
b2f6c13b6a
Fp editor and Fp viewer: fix missing info on msg panel after loading a fp
...
Fix also duplicate/not used code
Fixes #11404
https://gitlab.com/kicad/code/kicad/issues/11404
2023-01-25 17:47:04 +01:00
a76a4f9788
Router: don't unnecessarily change track widths on layer change
...
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/13546
2023-01-25 09:34:17 -05:00
ae812bdf39
Try to use the theme setting for the cli pcb svg export
2023-01-24 22:57:28 -05:00
e886ccacbd
Cleanup unused local variable.
2023-01-24 23:45:55 +00:00
769afa6fe6
Properties: refactoring
2023-01-24 12:08:37 -05:00
890103a012
Properties: Fix handling of mixed value selections
2023-01-24 11:51:26 -05:00
05198b896f
Move PCB_EDIT_FRAME::ExchangeFootprint to pcb_edit_frame.cpp
...
No idea why it was in the dialog file, but there is no good reason for that.
2023-01-24 12:54:05 +00:00
00e2bbac5a
Special-case net-ties for solder mask bridging.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13646
2023-01-24 11:33:08 +00:00
b0ec006b81
The safety of running the event loop during doCloseWindow is debatable.
...
(Possibly a fix for Sentry KICAD-7T.)
2023-01-24 11:33:08 +00:00
8eae75e8d6
Suppress handling of selection events until delete is done.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13451
2023-01-24 00:07:40 +00:00
e713a3eac2
Handle cleanup safely
...
Make sure that the connectivity has successfully completed before
attempting to merge segments. Also avoids reaching into the shared_ptr
if we don't need to
Fixes https://gitlab.com/kicad/code/kicad/issues/13639
2023-01-23 15:56:46 -08:00
12b0a12d74
Handle DP checks for board minimum rules
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/13640
2023-01-23 17:45:16 -05:00
efe12f2da5
Cleanup variable naming
...
Also remove ancient/unused code for lazy resolving
2023-01-23 22:21:12 +00:00
a9ed47f06c
Update KICAD6->KICAD7
2023-01-23 22:21:12 +00:00
509b39e9e4
Propagate nets within non-conflicting clusters immediately.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13601
2023-01-23 16:25:29 +00:00
ece775c53c
Blind/buried vias are drilled, and drilled holes need to avoid prior-burned holes.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13627
2023-01-23 16:25:29 +00:00
c430c88f9d
Immediate update of no-net objects when they're connected to something else.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13601
2023-01-23 16:25:29 +00:00
4a55b7998a
Standardize on longer phrasing
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/13514
2023-01-23 08:59:18 -05:00
e11012fe06
Properties: show via friendly name
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/13635
2023-01-23 08:56:21 -05:00
09b83b95d0
PCB Editor: Locked filter unchecked by default
...
And some minor code style improvement in one place
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/13246
2023-01-23 11:36:06 +00:00
136c150460
plot_brditems_plotter: fix crash (null poiner use) when run from kicad-cli,
...
with a not initialized plotter render settings.
Fixes #13633
https://gitlab.com/kicad/code/kicad/issues/13633
2023-01-23 11:50:27 +01:00
e0111f709b
Fix minor cosmetic issues in Print dialogs
...
Fixes #13629
https://gitlab.com/kicad/code/kicad/issues/13629
2023-01-23 09:21:23 +01:00
1bc3f77d2e
Coverity fixes
2023-01-22 22:48:31 -05:00
1aca216f18
Add DRC suggestions for Via_Type
2023-01-23 05:14:06 +03:00
91d154cd28
Add DRC suggestions for Shape
2023-01-22 22:35:12 +03:00
05eafdc08b
Add missing DRC Type suggestions.
2023-01-22 22:35:12 +03:00
bf8762c57c
Streamline color lookup (and a bit of wxS).
2023-01-22 17:18:03 +00:00
09cb222252
Change indeterminate checkbox behavior to be more intuitive
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/13604
2023-01-22 12:10:45 -05:00
351f668645
Separate selection change updates from properties updates
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/13624
2023-01-22 12:10:45 -05:00
729b2deb5c
Use board layer names for properties grid.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13553
2023-01-22 15:47:57 +00:00
0ff32d20cd
wxS more things
2023-01-22 09:41:42 -05:00
03a64492e8
Handle all member vars if not doing a std::swap on "this".
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13621
2023-01-22 13:00:18 +00:00
86c12d35b4
Small order change for three View menu items
2023-01-22 01:04:17 +00:00
005648f4db
The net inspector is a modeless panel, not a dialog.
...
No need for OK button.
2023-01-22 00:14:02 +00:00
8a9a63134c
Minor dialog adjustments.
2023-01-22 00:14:02 +00:00
3a9ef02fdf
Clean up handling of selection changes
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/13620
Fixes https://gitlab.com/kicad/code/kicad/-/issues/13609
2023-01-21 17:37:29 -05:00
df4f9d4c94
FP editor: fix crash when trying to save a footprint after removing its library
...
Fixes #13619
https://gitlab.com/kicad/code/kicad/issues/13619
2023-01-21 18:18:38 +01:00
12215647f1
Handler blind/buried/micro via drawing when all layers are hidden.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13607
2023-01-20 19:09:12 +00:00
6586a2ca66
PCB Editor: prevent scroll wheel on track size opening board settings
...
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/13218
2023-01-20 12:13:16 -05:00
34810d24a5
Remove unique dummy text
...
Text that will be replaced programmatically should be specified as
"dummy" in wxFormBuilder to avoid adding unneeded translation strings
2023-01-20 09:11:08 -08:00
89d434255c
Run clearance rules for router status bar.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13605
2023-01-20 14:19:58 +00:00
d9a90519f9
Flatten (and fix layout) of library table managers.
2023-01-20 14:19:58 +00:00
24dd402e29
Finish processing last pad in pad group, and trim whitespace from pads.
2023-01-19 15:48:32 +00:00
67eae77e9d
PCB/SCH/3D: Implement 3D cross-probing from schematic
...
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/3859
2023-01-19 10:39:47 -05:00
b8352b07c5
PCB: Immediate mode copy should deselect if hover selecting
2023-01-19 09:45:47 -05:00
7e5a2450b8
Move multiple wxMessageBox to DisplayErrorMessage
...
Also provide protection for headless running in multiple callsites
Fixes https://gitlab.com/kicad/code/kicad/issues/13575
2023-01-18 16:54:01 -08:00
b99bd7633d
Allow commas, spaces in pad names for net-ties
...
Net tie groups are currently separated by comma. But comma is also an
allowed, albeit rare character for pad names. To allow pad names with
commas in net tie groups, the group definition must be escaped with a
forward slash for commas (and forward slashes).
Pad 1,2
Pad 2,3
Net-tie group "1\,2,2\,3"
Fixes https://gitlab.com/kicad/code/kicad/issues/13001
2023-01-18 14:45:52 -08:00
8f4486752d
Fix build error
2023-01-18 10:20:20 -08:00
7fa15b3fbb
Only update items that can be affected
...
When updating the view, don't force repaint all items. Changing the
line width only affects elements with lines
Fixes https://gitlab.com/kicad/code/kicad/issues/13579
2023-01-18 09:59:00 -08:00
cff0560088
Eagle schematic import: Handling of escaped text
2023-01-18 12:33:36 +00:00
3af9c658e6
Don't specify fonts in wxFormBuilder. It only leads to pain.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13547
2023-01-18 12:28:07 +00:00
90c76fa4bc
Pcbnew: display first and last layer ID on buried and micro vias.
...
Fixes #13566
https://gitlab.com/kicad/code/kicad/issues/13566
2023-01-18 09:56:25 +01:00
940d88c47d
PCB_SHAPE::swapData() : Do not swap twice a parameter
...
Fixes #13576
https://gitlab.com/kicad/code/kicad/issues/13576
2023-01-18 08:37:34 +01:00
7844602210
Nullptr safety.
2023-01-18 01:30:40 +00:00
f90b04c715
Nullptr safety. (Sentry KICAD-5N)
2023-01-18 01:05:27 +00:00
f45d44a639
Don't leave temp footprints attached to a board.
2023-01-18 00:46:59 +00:00
f35a02d57a
Move early exit higher in netname redraw
...
If the track is outside of the viewbox, GetLOD returns HIDE. This needs
to be handled quickly in the loop before further processing
Fixes https://gitlab.com/kicad/code/kicad/issues/13572
2023-01-17 15:56:04 -08:00
3cc960a872
Push nets to free pads when they're used.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13516
Fixes https://gitlab.com/kicad/code/kicad/issues/13517
2023-01-17 23:29:47 +00:00
1d223d1439
Safely load python plugins
...
Catch potential exceptions when doing the initial python plugin load
Fixes https://gitlab.com/kicad/code/kicad/issues/12231
2023-01-17 12:56:15 -08:00
60ba245474
Remove Eagle islands by default unless told otherwise
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13503
2023-01-17 12:49:44 -08:00
26c821962f
Simplify and regularize text variable substitution architecture.
...
EDA_ITEMs are responsible for giving their parent a crack at it if
they failed to resolve it. This recurses all the way up to the schematic/
board, and then to the project.
Cross-reference handling is also move to the EDA_ITEMs. It must be done
before bubbling up so that we don't end up in loops. (The aDepth parameter
will break the loop, but without having done anything useful.)
Fixes https://gitlab.com/kicad/code/kicad/issues/13541
2023-01-17 17:05:41 +00:00
9820062c71
Fix clipping issue in Pad Properties dialog.
2023-01-17 17:05:41 +00:00
022c913e8f
Fix another broken graphics import file filter.
2023-01-17 11:34:51 -05:00
369c0efade
Bitmaps: respect source DPI
...
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/13565
2023-01-17 11:20:17 -05:00
f81642bbb3
Fix broken graphics import file filters.
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/13570
2023-01-17 11:19:53 -05:00
90c5ede1e6
pcbnew: move DIALOG_PAD_PROPERTIES_BASE from dialog_pad_properties to its own files.
...
dialog_pad_properties_base.fbp included to many dialog descriptions.
2023-01-17 09:44:28 +01:00
ac94995f70
Some more wxS
2023-01-16 19:07:50 -05:00
08295c795b
Add vertical justification buttons to pcbnew text dialog
...
kicad 6 default behaviour was not achievable through the UI.
Addresses #13423 and #2375
2023-01-16 18:40:08 +00:00
22497502e6
Don't leave a dummyPad in a group. Freeing it will cause problems.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13556
2023-01-16 17:30:40 +00:00
e490728226
Don't run the footprint checker's shorting pads routine at board level.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13555
2023-01-16 16:44:16 +00:00
c4ccf46cc7
DIALOG_PAD_PRIMITIVES_PROPERTIES: fix incorrect display of polygon primitive.
...
Fixes #13557
https://gitlab.com/kicad/code/kicad/issues/13557
2023-01-16 17:32:22 +01:00
f0b2902b8c
Don't allow quit while zone filler is running.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13551
2023-01-16 16:01:45 +00:00
62649b868c
Ensure good fonts in grid headers.
...
Also moves rendering to a flat look for headers (instead of a beveled
border).
Fixes https://gitlab.com/kicad/code/kicad/issues/13547
2023-01-16 02:47:14 +00:00
ca1fb732c8
Share Eagle var substitution between board and schematic importers.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13541
2023-01-15 22:27:19 +00:00
91c5bb9175
Block user-initiated zone-fill actions, but not system ones.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13536
2023-01-15 19:16:36 +00:00
0328cae94c
Detach revert footprint copy from parent board.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13537
2023-01-15 17:26:44 +00:00
744fd3a71e
Fix GCC build issue on Linux.
2023-01-15 12:18:56 -05:00
bf4b9ef6e2
Remove sorting by priority before filling.
...
We can't fill lower-priority zones until the higher-priority ones
have been tesselated, and as the tesselation step always gets pushed
to the back of the queue after the fill finishes having them sorted
by priority accomplishes little. (We're also going to push all other
layers of the high-priority zone to the back as the first layer will
have the lock, further degrading the usefulness of sorting.)
2023-01-15 15:52:24 +00:00
0c8f95aa02
Make sure tesselate_lambda has lock before modifying zone.
...
Also implements locking for upating pad & tracks' zoneConnectionCaches.
Fixes https://gitlab.com/kicad/code/kicad/issues/13531
2023-01-15 15:52:24 +00:00
45a71a205c
Don't wait for degenerate zones.
2023-01-15 15:52:24 +00:00
f1aee2fa18
Minor dialog tweaks.
2023-01-14 01:45:30 +00:00
ea4c3a267b
Be more discerning about dirtying zones for auto-refill.
...
In particular, record which children caused a parent footprint to be
added to the commit so we can determine if they have intersecting
bounding boxes and/or layers.
Fixes https://gitlab.com/kicad/code/kicad/issues/13512
2023-01-13 19:09:22 +00:00
f358749b28
Import copper pour cutouts from Eagle packages (footprints).
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13503
2023-01-13 16:35:45 +00:00
761e754294
router: trying to improve the 'guess posture' algorithm to work well with both fix-all and fix-last-segment on click
2023-01-12 23:37:07 +01:00
65def26b4d
router: follow up ROUTER::GetUpdatedItems() API changes in the ROUTER_TOOL
2023-01-12 23:37:07 +01:00
d07d6c9a30
router: fix 'Bowen knot'-looking hulls for 0-length segments
2023-01-12 23:37:07 +01:00
0595440d79
router: minor improvements in shove algorithm handling of vias
2023-01-12 23:37:07 +01:00
213d30cad6
router: workaround for assertion fail on NODE::Add(unique_ptr<LINE>)
2023-01-12 23:37:07 +01:00
aa7271e55a
router: expose the 'head' traces in a separate list for debug logs
2023-01-12 23:37:07 +01:00
79f567cff4
Standardize BOM nomenclature
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13499
2023-01-12 13:54:12 -08:00
631fd54f9f
Don't suppress writing of empty values. They have meaning.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13507
2023-01-12 15:24:59 +00:00
595bf70d5d
Do not try to read from UI elements that haven't been initialized yet
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/13480
2023-01-12 09:16:22 -05:00
c530bdb5a1
Rename GetSelectMenuText to GetItemDescription
...
This descriptive text is used for many more things than
just the select menu these days.
2023-01-11 22:27:44 -05:00
1ff1571849
Bring back deprecated net properties to rules system
2023-01-11 22:14:52 -05:00
2654279678
Cleanup zone bbox cache in destructor
2023-01-12 00:21:51 +00:00
248399f771
Standardize print/plot terms
...
Use choice box for color/bw selection
"border and title block" -> "drawing sheet"
Fixes https://gitlab.com/kicad/code/kicad/issues/13128
2023-01-11 12:30:02 -08:00
8238973bf4
Make sure std::unique_ptr gets initialized.
...
(Fixes unit test failure.)
2023-01-11 18:28:29 +00:00
096cc7a5ad
Suppress unflashed annular rings only when copper layer is primary.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13471
2023-01-11 18:15:46 +00:00
c85dcbc4e1
Improve performance of IncrementTimestamp so it can be called at will.
2023-01-11 17:41:08 +00:00
1500e3bb80
Pcbnew, minor fix: do not write twice the dielectric color in stackup section in broad file.
2023-01-11 17:45:00 +01:00
30c9deb9d5
Flat(er) look for paged dialogs.
2023-01-11 01:11:25 +00:00
f153ff8453
Add GetCurrentSelection() python scripting helper
2023-01-10 16:39:48 +00:00
507edc54b3
Fix issues related to footprint wizards not loaded/reloaded in fp editor and fp wizard frame.
...
Fixes #11195
https://gitlab.com/kicad/code/kicad/issues/11195
2023-01-09 19:58:02 +01:00
c3ded7a03d
Remove board editor standard dialog button static line separators.
2023-01-09 08:49:38 -05:00
e916b715d5
Special case for very-short tracks was killing both-ends-in-a-zone.
...
(And doing so randomly as if the closer endpoint to the zone center
was the one without a pad then it would get marked as good, while if
it was the other way around we'd notch 2 connections for the pad end
and none for the other end.)
Fixes https://gitlab.com/kicad/code/kicad/issues/13420
2023-01-09 13:35:54 +00:00
82a1175d72
Fix cli gerbers output path and add job file
2023-01-08 23:03:30 -05:00
6ed90134c7
Check for collisions on common layers.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13438
2023-01-08 20:53:15 +00:00
f28ea5e784
Remove standard dialog button static line separators.
...
For the sake of consistency across all dialogs and window that behave
like dialogs, remove the static line that separates the main part of
the dialog from the standard buttons. This only applies to windows
that have the standard button on the bottom of the frame.
This covers the 3D viewer, CvPcb, common, GerbView and KiCad dialogs.
2023-01-08 13:15:33 -05:00
ae8bbcad32
PadArray.py: ensure parameters used to create a VECTOR2I are ints.
...
Fixes #13430
https://gitlab.com/kicad/code/kicad/issues/13430
2023-01-08 09:10:13 +01:00
a369fd6a9c
Fix swig optimization flag causing incompatible codegen
2023-01-08 00:55:21 +00:00
1e407e5e20
Minor dialog adjustments.
2023-01-07 23:55:01 +00:00
4794956804
Minor dialog adjustments.
2023-01-07 22:26:43 +00:00
bc50f537ff
Re-layout standard buttons after editing their names.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13425
2023-01-07 19:34:32 +00:00
e509fa0fc9
Don't depend on a pad being connected to a non-zone when filling zones.
...
If the pad hasn't already been owned by another zone, and the zone we're
currently filling can connect to it, then we want to try to flash it even
if it's not connected to anything else.
Fixes https://gitlab.com/kicad/code/kicad/issues/13415
2023-01-07 19:34:32 +00:00
a93c83d2fa
Don't count non-coper SMD pads for likely type
...
We are only concerned for connected pads, not apertures
Fixes https://gitlab.com/kicad/code/kicad/issues/13387
2023-01-07 07:14:16 -08:00
94847336a1
Bug fix for dark mode switch for layers palette.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13154
2023-01-06 20:43:33 +00:00
2399759c03
Allow default sexpr libs to have '.' and no .pretty
...
We default to KICAD_SEXPR format. In this case, if the library doesn't
have the .pretty extension, the full directory name including a '.' is
the correct nickname
Fixes https://gitlab.com/kicad/code/kicad/issues/13388
2023-01-06 10:08:32 -08:00
2cbb66d70d
Dim other pads when in pad edit mode.
2023-01-06 11:13:57 +00:00
25f34a14a1
Check file starting signature when opening
...
Opening .brd files might be legacy or eagle (probably others as well).
We check for the starting "PCBNEW" in KiCad files to differentiate
Fixes https://gitlab.com/kicad/code/kicad/issues/10201
2023-01-05 18:10:22 -08:00
1ccd387c8d
Exit a group when selecting a component outside it
...
We had this filter in place when doing mouse selection, but not when
the selection comes from another tool event.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/13398
2023-01-05 20:32:52 -05:00
a6eb6d3228
Default to SMD if we have an SMD pad
...
SMD pads indicate that the footprint can be used in PnP more often than
the presence of THT indicate that it cannot.
Fixes https://gitlab.com/kicad/code/kicad/issues/13387
2023-01-05 16:56:07 -08:00
126225866b
Don't add footprint components to PCB group
...
Footprint components are only group-able inside of the footprint editor
Fixes https://gitlab.com/kicad/code/kicad/issues/13396
2023-01-05 15:38:07 -08:00
7dfa100ff0
Correctly refresh the board after action plugin run and maintain
...
selection
2023-01-05 14:05:15 -08:00
cbe5340d37
Allow pads in multi-select mode when nothing else would be selected.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13371
2023-01-05 17:02:50 +00:00
fa7205ebbc
Handle block insert scaling a little better but incompletely
...
https://gitlab.com/kicad/code/kicad/-/issues/11614
2023-01-04 21:22:36 -05:00
0e42cb19f2
Realize we can just describe the dxf arb axis with our MATRIX3x3 class
2023-01-04 20:42:56 -05:00
20d7ffd5d3
Ensure we are not trying to sort on an invalid col
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13377
2023-01-04 13:56:25 -08:00
6271917682
Remove deprecated -py3 flag, use -O for swig
2023-01-04 11:32:15 -08:00
98d55ce82f
Avoid rebuilding with each commit
...
We shouldn't include the kicad_build_info.h outside of the wrapper
build_info.h. Also adds an error directive to prevent re-introduction
of define dependencies
2023-01-04 11:32:15 -08:00
14339aa786
Fix shadowing variable
...
Move check into switch block
2023-01-03 17:15:44 -08:00
ac3ed02283
Rework bitmap cache and enable it
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/12405
2023-01-04 00:26:45 +00:00
8ab9934143
Use our own cmake module path variable to avoid conflicting with the main ones listy functional
2023-01-03 19:18:16 -05:00
375fdb7a49
Exact clearance is allowed; less than clearance is an error.
...
Also fixes a bug where the units weren't shown for extra precision
numbers.
Fixes https://gitlab.com/kicad/code/kicad/issues/13262
2023-01-04 00:03:11 +00:00
1ba9a6abe3
Rotate/Mirror: unbreak immediate mode actions
2023-01-03 16:05:52 -05:00
c2e7524cb6
Surpress the giant opencascade stats print unless we are tracing
...
Also catch Warn level messages to set a flag and print the relevant there were warning message
Fixes https://gitlab.com/kicad/code/kicad/-/issues/8613
2023-01-02 18:34:32 -05:00
056349e5ea
Units for footprint preview widgets.
2023-01-02 22:12:26 +00:00
67e6603699
Move updateUnits functionality to where it can be shared.
...
Also call it when adding a footprint via the chooser.
Fixes https://gitlab.com/kicad/code/kicad/issues/13340
2023-01-02 22:12:26 +00:00
f4bce6079c
Prevent round-off errors from drawing one spoke and not the other.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13316
2023-01-02 19:23:52 +00:00
07b4f88e6b
Pcbnew: Fillet Lines tool does not set line width and layer.
...
When fillet a polygon or a rect, the resulting lines and arcs had incorrect
width and layer.
Fixes #13338
https://gitlab.com/kicad/code/kicad/issues/13338
2023-01-02 16:52:08 +01:00
20f2232d4e
Adjust dimension units when placing footprints on board.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13339
2023-01-02 12:39:35 +00:00
e8114dc49a
Minor compil and Coverity warnings fixes.
2023-01-02 10:21:42 +01:00
16fd586c41
Do not prune items/layers when copying the clipboard to the FP editor: all are allowed
...
(Some are disabled only for GUI)
Fixes #13334
https://gitlab.com/kicad/code/kicad/issues/13334
2023-01-01 13:35:05 +01:00
8e8a3c7bdc
Do not translate name in version info
...
Leave the application name in version info untranslated when
viewed, copied, or used in a bug report.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/13298
2022-12-31 20:28:45 -05:00
9f56771611
Fix a typo
2022-12-31 11:41:04 +01:00
53b6993d2b
Don't report errors in first pass of board outline generation.
...
Segments which aren't used to build holes in footprints can still
be used by the second pass to build the board outline.
Fixes https://gitlab.com/kicad/code/kicad/issues/13321
2022-12-30 22:32:08 +00:00
95f5d92fc6
Fix length overestimation when first/last line segment enters a pad.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13322
2022-12-30 16:27:59 +05:00
867a2e833d
router: Hotglue the debug graphics back to pcbnew.
2022-12-30 14:44:48 +05:00
4c63b4e061
Class name <-> file name sync.
2022-12-29 18:05:57 +00:00
7d40bbdf38
router: mark the head trace (as opposed to the 'fixed tail') with fully saturated color
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/11386
2022-12-29 17:54:59 +01:00
dfb1068358
router: improve heuristic to avoid segment drag 'flickery snapping'
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/10113
2022-12-29 17:54:31 +01:00
4bb1b4a3d2
Router: settings dialog fixes
...
Make keyboard activation of OK save settings instead of cancelling.
Also, fix the string for the shortcut so that it works (shortcut
unchanged).
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/13303
2022-12-29 10:31:12 -05:00
3b55f9e326
PCB Editor: Inform tools when selecting/unselecting net
...
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/13308
2022-12-29 13:46:20 +00:00
29e51cc198
fix quoting of layernames
2022-12-29 09:01:11 +00:00
411efe6f3d
PCB Editor: Allow mouse drag of group-of-groups
...
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/13076
2022-12-28 15:23:52 -05:00
0c415a7190
PCB Editor: make rotate menu bar items conditional on selection items
2022-12-28 13:33:35 -05:00
d62681f6db
PCB Editor: fix pad preview sketch mode not applying immediately
2022-12-28 12:27:57 -05:00
e7300ffb5c
Improved column sizing in library setup dialogs.
2022-12-28 16:27:03 +00:00
8d4694a83e
Iterator safety.
...
Move mergeSegments to a lambda so we can more easily break out of the
nested for-loops when we find a merge. We really need to start over
again at that point as we may have invalidated our connectivity items
iterator.
This also means we don't have to queue up all the track pointers, which
should get us a _little_ bit of the performance back.
Fixes https://gitlab.com/kicad/code/kicad/issues/13287
2022-12-27 20:14:13 +00:00
741d1e043a
PCB Editor: make Mirror menu items conditional
...
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/13230
2022-12-27 14:18:47 -05:00
c85590a470
Correct is-inside logic.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13259
2022-12-27 14:34:35 +00:00
ee0a41e3bc
Remove excess calls to SelectedItemsModified
...
We really don't want to post these events unless the *selected* items
were actually modified, since it results in a redraw of the properties
panel (which disturbs edit state and causes flicker on MSW).
Now the COMMIT system is responsible for sending this event iff the
commit touches items that are selected.
Side note: UpdateMsgPanel is useless on every app except pl_editor, so
it can probably be refactored/removed at some point.
2022-12-26 20:57:58 -05:00
5eb3f5d3e7
Use correct translation macro for group names
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/13277
2022-12-26 20:11:20 -05:00
dee5357d4d
Properties: give focus back to canvas after committing changes
...
Only needed on MSW, but safe to enable everywhere I think
Fixes https://gitlab.com/kicad/code/kicad/-/issues/13275
2022-12-26 16:46:03 -05:00
ab6aa08f33
Fix typo.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13263
2022-12-26 20:33:04 +00:00
1f3727f548
Assigning a netclass has no meaning in fp editor.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13267
2022-12-26 20:33:04 +00:00
f214f6f44c
Temporarily work around buggy zone refresh behavior
...
The actual problem is that EVENTS::SelectedItemsModified (via EDA_DRAW_FRAME::UpdateMsgPanel) is being called on every OnModify call, where it really should only be called if the *selected* items are modified. This problem will take longer to fix.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/13279
2022-12-26 14:04:53 -05:00
eb5a831a99
Fix typo.
2022-12-26 14:11:46 +00:00
0094a0fc15
Treat teardrops as tracks not zones for disallow constraints.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13264
2022-12-26 11:33:09 +00:00
fbaf4af489
Properties: Allow dynamic update of read-only state
2022-12-25 20:35:44 -05:00
b85fab9ab6
Support DXF ellipses and elliptical arcs
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/12563
2022-12-24 22:46:07 -05:00
5dce8323e8
KIGFX::REPAINT is not enough if the item isn't in the view.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11656
Fixes https://gitlab.com/kicad/code/kicad/issues/13217
2022-12-24 17:18:22 +00:00
34e134c5e5
Don't allow clearanceEpsilon to force clearance < 0.
...
Also, a plated hole has the max clearance of hole_clearance and
copper_clearance.
Fixes https://gitlab.com/kicad/code/kicad/issues/13237
2022-12-24 12:56:41 +00:00
020f8f61db
Let's try fixing the doxygen-python again
2022-12-23 23:11:04 -05:00
59f0e428fa
Fix a PnS router issue doesn't respect knockout texts.
...
Fixes #13251
https://gitlab.com/kicad/code/kicad/issues/13251
2022-12-23 18:17:44 +01:00
eef47c2a79
DRC: ensure tracks are tested against holes, even if hole clearance is set to 0.
...
Even with clearance = 0, copper to hole must be tested because it cannot be
inside the hole
2022-12-23 14:06:10 +01:00
e152cf0a92
Undo one doxygen-python build change, remains broken
2022-12-22 21:35:21 -05:00
e19fb101ef
Properties: Show basic marker props
2022-12-22 17:45:16 -05:00
18788b03eb
Properties: Hide unsupported hyperlink property
2022-12-22 17:45:16 -05:00
2b4cafe9f7
Properties: Fixes for arc tracks
2022-12-22 17:45:16 -05:00
4a0588db7a
Properties: translation fixes
2022-12-22 17:45:16 -05:00
cc2b107649
Footprint Viewer: resolve canvas type after menus are created
...
SaveSettings can't be called until the menus are in place
Fixes https://gitlab.com/kicad/code/kicad/-/issues/13243
2022-12-22 12:14:55 -05:00
8bfec30761
Fix the pcbnew.py dependency causing the doxygen to fail
...
The doxygen-python target recreates pcbnew.py that got deleted by xml-to-docstrings
2022-12-21 23:49:23 -05:00
caeb579174
Fix the dependencies for the python doxygen build
...
DEPENDS was being used for targets which is invalid for add_custom_target...as confusing as that is.
It is files only.
2022-12-21 23:39:35 -05:00
1cc9792cdb
Fix snapping dist when disabling grid
...
The disable grid hotkey should allow the snap scale to be completely
determined by the snapSize and world scale. This prevents snapRange
from overriding in the case where grid is disabled.
Additionally, we disallow grid snapping when the grid scale is not
visible. This means that when zoomed out sufficiently to not show the
minor ticks, these minor ticks will not override a snap
Fixes https://gitlab.com/kicad/code/kicad/issues/12303
2022-12-21 17:47:45 -08:00
1590e48ec1
Use translated strings for property display
2022-12-21 18:03:15 -05:00
47dc2379d8
PCB: Fix issues with grab unconnected
...
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/13232
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/13233
2022-12-21 15:10:19 -05:00
e28f6ecc00
Fetch a better location for keepout area collsions.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13220
2022-12-21 18:22:15 +00:00
e8f755c665
router: Match segment endpoint calculation between dragger and the tool.
...
Prevents always picking point A when dragging short segments.
2022-12-21 20:55:49 +03:00
75053cfc57
Remove normally unused code from Move function.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13222
2022-12-21 19:06:32 +03:00
5d94d2634e
PCB Editor: make locking menu items conditional
...
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/5202
2022-12-21 10:34:54 -05:00
44ab6876d9
fp editor: remove useless "Unroute Selected" from context menu.
...
Fixes #13229
https://gitlab.com/kicad/code/kicad/issues/13229
2022-12-21 13:11:51 +01:00
b0cbab5c4b
Footprint Editor: Focus search field when window is first opened
...
The search field on the Symbol Editor is focused when its window
is first opened. Similar behavior has been implemented in the search
field of the Footprint Editor with this change.
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/13100
2022-12-20 19:54:02 +00:00
bd24e85289
PCB: Add Copy With Reference to the Positioning Menu
...
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/11947
2022-12-20 11:54:05 -05:00
161a1e21f5
PnS router: NPTH can be on copper layers, depending of the pad size and the hole size.
...
Now: round NPTH with a round hole bigger than the pad are not on a copper layer.
Other pas shapes are seen on copper layers (far from ideal, but reasonable)
Fixes #13214
https://gitlab.com/kicad/code/kicad/issues/13214
2022-12-20 12:50:22 +01:00
f601c87cea
Export UNITS_PROVIDE into SWIG
2022-12-19 17:30:37 +00:00
abff7975f1
Python scripting: fix some issues when trying to create a DRC Report:
...
- avoid aborting the DRC report on a .dru issue without any error message.
- ensure the list of layer names is up to date (contains both canonical
and user layers names, that can be used in DRC tests.
Fixes #11410
https://gitlab.com/kicad/code/kicad/issues/11410
2022-12-19 12:39:20 +01:00
6c73fe05e9
python scripting: better fix for commit 5a79821 (fix crash due to a null pointer):
...
Try to use a better error message for severity.
Fixes #13160
https://gitlab.com/kicad/code/kicad/issues/13160
2022-12-18 18:31:19 +01:00
639626fda4
Include the proper header instead of the entire lockfile function
2022-12-17 23:37:24 +00:00
82a11c71af
Clean up extra control creator logic in pcbnew save file dialog
2022-12-17 23:37:24 +00:00
5abf73e3c9
Never call ReCreateMenuBar inside a menu event handler
...
As of wxWidgets 3.2, the wxWidgets event handler runs code after the
the client event handler that depends on the menu still existing.
Because there are potentially many paths to call ReCreateMenuBar from
within a menu event handler, let's just wrap this action in a CallAfter
to make sure it happens after the wx handler call completes.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/13149
2022-12-16 16:37:51 -05:00
90fb315113
Add missing text alignment types to SWIG export
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13174
2022-12-16 18:55:21 +00:00
e699c25d98
Add operators for the SWIG wrapper of EDA_ANGLE
2022-12-16 18:55:21 +00:00
66c2462c7e
Eliminate angle as double in SWIG wrapper
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13171
2022-12-16 18:55:21 +00:00
66e9d5c61c
Return reference rather than copy
...
No need to return a const copy by default in GetItems(). The const
reference will be faster. Thanks to @GyrosGeier for the suggestion
2022-12-16 10:52:57 -08:00
12ea3e0822
Fix wxWidgets crankiness.
2022-12-16 00:53:53 +00:00
7750d2e00e
Microvias always use separate uvia netclass properties.
...
There is no current microvia size/drill.
Fixes https://gitlab.com/kicad/code/kicad/issues/13176
2022-12-16 00:10:03 +00:00
b5cb9eccbf
Generate dependency files from Swig
...
The wrapper is only rebuilt if one of the files that were parsed during
generation has changed.
2022-12-15 23:42:07 +00:00
e91c039ed3
Prevent event stackup when init pages
...
The paged book initialization (and others) can generate events,
re-laying out the whole dialog multiple times during initialization.
This halts events during the layout period
Fixes https://gitlab.com/kicad/code/kicad/issues/13158
2022-12-15 11:39:03 -08:00
5327ea5823
Respect selectabiltiy when adding wholy-selected groups.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13092
2022-12-15 17:57:58 +00:00
366cad1f01
Uniformly translate "<no net>" message.
2022-12-15 13:59:25 +00:00
5a7982161d
python scripting: fix crash due to a null pointer use.
...
Fixes #13160
https://gitlab.com/kicad/code/kicad/issues/13160
2022-12-15 14:27:29 +01:00
034981ff9d
Add tooltip to add existing library button in pcbnew
2022-12-15 02:08:41 +00:00
93879532f7
More wxTextCtrl minimum widths.
2022-12-14 23:23:41 +00:00
279edcefdc
Don't break tracks without snap
...
If the user asks to not snap to a track, we should also prevent the
track from snapping to the via
Fixes https://gitlab.com/kicad/code/kicad/issues/13142
2022-12-14 13:51:42 -08:00
19a5a3ae16
Remove unused member variable.
2022-12-14 13:36:28 +00:00
2f8cc84551
Hotglue footprint to svg export
...
This needs additional work
2022-12-13 22:50:15 -05:00
eb10d7d1d8
PCB Search: fix untranslated string
2022-12-13 16:35:15 -05:00
5652eaea82
Search Pane: name net 0 as "No Net" with no class
...
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/13148
2022-12-13 15:52:07 -05:00
c0872364d4
Get rid of bloated bitmap buttons on wxWidgets 3.2.
2022-12-13 20:48:02 +00:00
88038907fa
Pcbnew, graphic importer: do not import 0 length segments and smaller than 20 nm Bezier curves.
...
Degenerated Bezier curves (i.e. straight lines) are imported as segments.
They create issues in kicad because they are hard to edit and manage.
2022-12-13 20:23:40 +01:00
d3228dbab2
Differentiate search panel font between Mac and others.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13145
2022-12-13 00:47:19 +00:00
f24372bc18
Layout adjustments for wxWidgets 3.2.
2022-12-13 00:47:19 +00:00
9d13e419c2
Reduce compiler warnings.
2022-12-13 00:47:19 +00:00
4fe35d0df1
More push/pop tool issues
...
We need to pop the move tool off when it doesn't find anything to act on
so that the pushed tools under it on the stack can re-activate
Fixes https://gitlab.com/kicad/code/kicad/issues/13114
2022-12-12 12:56:35 -08:00
2fd500e20b
Respect the "report all errors" checkbox
...
When we have objects spanning multiple layers, the user doesn't need to
see every layer/hole combination violation if they do not request it
(cherry picked from commit c07043e762
2022-12-12 11:14:38 -08:00
6d73d9a08e
Split another couple of hairs in the never-ending "how big is a font".
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13009
Fixes https://gitlab.com/kicad/code/kicad/issues/13115
2022-12-12 17:37:17 +00:00
96a9ec4a0c
Enhance compatibility with V6.0 for Intersheetrefs fields associated to GLOBAL labels.
...
In V6.0, the identifier is "Intersheet References" and was not immediately
seen as Intersheetrefs field.
2022-12-12 16:38:04 +01:00
45eae3e594
Don't Simplify() polys with arcs in them.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13134
2022-12-12 12:54:34 +00:00
5e8227b54a
pcbnew: Support dragging arc center in "Keep endpoints" mode.
2022-12-12 13:00:44 +03:00
3eb31befed
Fix a delay when dragging arc endpoints in pcbnew.
2022-12-12 09:39:56 +03:00
da1e5a80a8
Restore removeCorner transition in PCB editor.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13133
2022-12-12 07:04:20 +03:00
7e53663d5d
Add a bulk gerber export that's a wee bit smarter
2022-12-11 20:13:26 -05:00
65538ccad4
Rename files and classes to match dialog name.
...
Also a bit of formatting cleanup.
2022-12-11 18:42:57 +00:00
d27fb35780
A few more adjustments to wx 3.2 layout issues.
2022-12-11 14:12:35 +00:00
4e47b5c25f
Fix some layout and selection issues on Mac.
...
Some of these are due to moving to wxWidgets 3.2, but I'm not sure
all of them are. In particular, the need for CallAfter() in the
search pane's selection handler is probably just a wxWidgets bug on
Mac (the control lies about the current selection inside the event
handler).
Also sets better column widths in the search pane.
2022-12-11 00:56:46 +00:00
a7df573748
Clear bounding box caches *before* reverting commit.
...
We're going to re-add items to the view assuming they will have their
current locations, which requires the bounding boxes to be refreshed.
Fixes https://gitlab.com/kicad/code/kicad/issues/13084
2022-12-11 00:56:46 +00:00
75f1067642
GRAPHICS_CLEANER: fix bad detection of short Bezier curves that can be cleaned
...
eda_shape: small enhancement: when generating a polyline from the Bezier curve,
filter the last point if the last segment is shorter than the given min lenght
2022-12-10 18:19:09 +01:00
492e6548ff
If item is on mask layer then we won't call it again on copper layer.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13075
2022-12-10 13:51:00 +00:00
b01d950071
Remove start pt when collinear with neighboring pts in zone/poly draw.
2022-12-10 06:21:54 +03:00
02325130fa
Initial arm64 work
2022-12-09 23:48:31 +00:00
aff5245041
Fix enum class DRILL_MARKS no export to python
2022-12-09 18:07:58 +00:00
b4b25a7009
Fix Pack & Move footprints when working with groups.
2022-12-09 20:42:35 +03:00
c1f82d0c80
Canceling Move cancels Pack too in Pack & Move footprints.
2022-12-09 20:41:56 +03:00
3d2b1aaf90
Improve H/V/45 deg mode when drawing zones and polygons.
2022-12-09 19:11:56 +03:00
ad33515916
Properties: mask visibility for free text
2022-12-08 18:06:14 -05:00
67df342255
Properties: mask irrelevant NPTH properties
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/13087
2022-12-08 18:00:44 -05:00
72939e8918
Properties: enable in PCB editor for everyone
...
Leaving the AC flag around for future use in the footprint editor etc
Fixes https://gitlab.com/kicad/code/kicad/-/issues/2039
2022-12-08 17:38:36 -05:00
0e75bf02fa
Selection: refactor modifier checking
2022-12-08 14:12:12 -05:00
2b0d7f65d0
Properties: sync wxPGGlobalVars map state with editor global state
...
Thanks to @dsa-t for suggesting this
(maybe)
Fixes https://gitlab.com/kicad/code/kicad/-/issues/12297
2022-12-08 07:55:57 -05:00
435651237c
Properties: Support overridden availability functions
2022-12-08 00:09:51 -05:00
2fc0cd68ed
Avoid crashing due to empty lib tables in cli
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/13097
2022-12-07 23:56:03 -05:00
33d76f63b0
Properties: save and restore splitter position
2022-12-07 21:38:33 -05:00
e03a91c9c7
Reduce static ratsnest opacity when moving items; tweak colors.
2022-12-07 21:01:56 +03:00
82874daf08
router: Limit the amount of move attempts in ROUTER::Finish
...
Otherwise auto-finish hangs in some cases.
2022-12-07 19:24:13 +03:00
aa537fe559
Change bezier curve iteration to be easier to read
...
Fix #https://gitlab.com/kicad/code/kicad/-/issues/11153 somewhat
2022-12-06 23:25:04 -05:00
25688eb75e
Include plotprint_opts.h in swig
2022-12-07 04:02:59 +00:00
24ca892afb
Update tinysplice to latest
...
A few years worth of bug fixes
2022-12-06 22:28:23 -05:00
61119fbf64
Poke a const to make gcc happy
2022-12-06 22:00:23 -05:00
c0b5fe58c3
Implement output targeting of symlib/fplib upgrade per request
2022-12-06 21:20:27 -05:00
593dc9e8b6
Some fixes in Gerber job file:
...
- Ensure colors use a normalized value (normalized name or RnnGnnBnn notation).
- Better code.
2022-12-06 17:01:37 +01:00
008704fc6f
router: Allow highlighting both DP nets when routing.
2022-12-06 05:24:23 +03:00
38a509e768
Properties: support bitmaps
2022-12-05 18:31:40 -05:00
c771d866f5
Cleanup 3D caches before d'tors run.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10973
2022-12-05 22:39:09 +00:00
d8f94962ff
Prevent halting the main GUI thread
2022-12-05 11:10:57 -08:00
0089df8ca4
Update comment in zone filler.
2022-12-05 21:48:12 +03:00
c4aed1d941
Make sure that threads are not running after zone filling.
2022-12-05 21:36:59 +03:00
6d513e7ecf
Expose changing arc edit mode in arc button context menu and Preferences
...
Ctrl+Space can still be used to cycle through modes.
Fixes https://gitlab.com/kicad/code/kicad/issues/5412
2022-12-05 21:28:16 +03:00
c3dddaf41f
panel_board_finish: mark board as modified when a finishing parameter is modified.
...
Fixes #13074
https://gitlab.com/kicad/code/kicad/issues/13074
2022-12-05 18:39:18 +01:00
295ef6588d
Fix uninitialized variable.
2022-12-05 14:42:05 +00:00
b7d41e0e56
Update simulator with NUMERIC_EVAL, decimal separator processing, etc.
...
Also includes fixes for instance data and resolving of textvar
references.
Also includes virtual d'tors for IBIS parser to get rid of all the
compile warnings on CLang.
Fixes https://gitlab.com/kicad/code/kicad/issues/12357
2022-12-05 12:40:29 +00:00
4482e9f634
Minor UI fixes.
2022-12-05 00:37:25 +03:00
47e7cd2e90
Don't allocate/delete a PG_UNIT_EDITOR unless needed
...
We cannot actually delete the PG_UNIT_EDITOR without substantial issues
from the global variables in wx.
2022-12-04 10:27:38 -08:00
90ad4dcc05
router: Various bugfixes in length tuning meandering
...
- When fine-tuning, keep adjust to the original baseline length
- Enforce a minimum amplitude based on settings, DP gap and track width
- Use binary search to fine-tune amplitude if the length is not trivial
- Account for inequalities in balancing
- Don't add the meander if adding it with min. amplitude will make the
tuning worse
- Keep a distance after meandering end to prevent overlaps in DP
Fixes https://gitlab.com/kicad/code/kicad/issues/9267
Fixes https://gitlab.com/kicad/code/kicad/issues/1776
2022-12-04 16:30:00 +00:00
ef83d01455
Minor string changes: "eeschema" / "pcbnew" in tooltips, and power port terminology
2022-12-04 14:29:57 +00:00
f6822120b3
Enable tab and return commit in property grid.
2022-12-04 11:51:44 +00:00
f805fd267f
Divorce UNIT_BINDER from wxFrame.
...
This allows us to supply Pcbnew or Eeschema as the unitsProvider when
called from the main frame.
Fixes https://gitlab.com/kicad/code/kicad/issues/13066
2022-12-04 11:51:44 +00:00
96819f6c01
Better cache invalidation for text objects with references.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13059
2022-12-04 11:51:44 +00:00
8c97a7b8c6
If fps contain complete board-edge holes then exclude those edges from main calc.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12921
2022-12-04 11:51:44 +00:00
92266635cc
Add an advanced config value for the minimum sliver
...
The hard coded value was too small for certain calculations. Better to
have a configurable value that is initially set to our error level to
allow for deviations that don't meet the visibility test for spikes.
These have become more apparent with Clipper2
2022-12-03 16:03:43 -08:00
b5bd633625
Strict-order points in connection_width
...
The connection width checker uses morton codes to order elements. The
sort should be primarily morton-based but needs to be stable in order to
ensure that nextZ/prevZ elements are properly placed as the actual
next/prev elements in the list. Otherwise, hitting a fracture point
might make us skip in the wrong direction
Fixes https://gitlab.com/kicad/code/kicad/issues/12831
2022-12-03 16:03:43 -08:00
497b368006
Pcbnew menubar: View/Drawing Mode/Sketch Text Items and Skecth Graphic Items:
...
Handle the Checked/Unchecked bitmap symbols of these 2 submenus.
2022-12-03 11:03:14 +01:00
4134db3c47
GCC fixes
2022-12-02 22:38:15 -05:00
050d282c12
Properties: Hide some copper-only properties from non-copper zones
2022-12-02 21:59:17 -05:00
a5f7ecbe00
Properties: support text knockout
2022-12-02 21:46:03 -05:00
0bc06d506c
Properties: reselect after canceled move
2022-12-02 21:40:21 -05:00
f9a36b9c91
Update thread_pool to 3.3
...
Fixes an issue with `wait_for_tasks()` and adds a lower-overhead
`push_loop` helper. We replace our usage of `parallelize_loop` with
`push_loop` as we didn't use the multi-future vector return and don't
need the extra overhead.
2022-12-02 12:01:34 -08:00
50d34e232b
pcbnew: fix a bug that crashes pcbnew on startup when running under gdb/msys2
2022-12-02 15:14:17 +01:00
bba8a0826e
Clear caches before undo operation.
...
The undo will remove/re-add items to the view in order to update the
RTree. However, if we only clear caches at the end (in the OnModify
call), then the (stale) bbox caches are still used for the re-add
operation, and they end up at the wrong place in the RTree.
Fixes https://gitlab.com/kicad/code/kicad/issues/13048
2022-12-02 10:59:48 +00:00
93c631af44
drawing_stackup_table_tool: fix incorrect color of dielectric sublayers.
...
when a dielectric has sublayers, the printed color was always the main layer color.
2022-12-02 10:41:20 +01:00
73b3f28c25
Properties: mask layer property for items that can't set it
2022-12-01 22:22:29 -05:00
ef3f2a8f1e
Properties: ignore shape props for textbox
2022-12-01 21:54:12 -05:00
e0ff8ba09c
Fix normalize flags for wx3.1
2022-12-01 18:49:08 -05:00
e56064696b
router: Refactor m_padToDieLength out of meander placer base.
2022-12-02 01:03:34 +03:00
3b25fdc212
Properties: Fix zones stomping on position props for other items
2022-12-01 16:55:12 -05:00
6066ccdfd5
STEP: Normalize path to kicad-cli
...
Keeping the path relative messes up the logic that loads the DSO
Fixes https://gitlab.com/kicad/code/kicad/-/issues/12728
2022-12-01 16:55:12 -05:00
3501ad1b4d
Record layer for starved thermal exclusions.
2022-12-01 18:04:34 +00:00
20791c99ac
Allow conversion of single track segments and vias.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13047
2022-12-01 17:15:29 +00:00
1aa05c0e10
router: Fix up single meander side switching.
2022-12-01 18:39:19 +03:00
d7368588db
stackup manager: fix incorrect handling of colors for multi-layer dielectrics
...
The dialog allows a color selection for each dielectric layer.
However for a "dielectric" defined by more than one layer, the color was handled
only for the first layer, and not for the other sub-layers.
2022-12-01 16:19:13 +01:00
c378d01068
code cleaning.
2022-12-01 16:01:38 +01:00
6befa1c57e
A bit of cleanup to recent convert tool changes.
2022-12-01 14:53:13 +00:00
4d8e73a630
Allow tracks as input to bounding hull generation.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13047
2022-12-01 14:53:13 +00:00
757b73e50e
Hide some unusable zone properties
2022-11-30 23:36:53 -05:00
7dbdb68730
router: ADDED option to create single-sided meanders.
2022-11-30 20:39:02 +00:00
b31349b679
Get consistent point for gfx import
...
TopLeftItem() should always return same element for our import
Fixes https://gitlab.com/kicad/code/kicad/issues/13041
2022-11-30 12:25:34 -08:00
cf33f33899
Standardize placement tool modifiers
...
PlaceImage, PlaceImportedGraphics and PlaceText need to handle the grid
and hotpoint snapping as well as the modifiers to disable them
2022-11-30 10:57:42 -08:00
3c4c4e5166
Remove shortened debug time from zone refill message.
...
Also adds a time-out for it.
2022-11-30 17:38:02 +00:00
074c087c21
Allow disabling of grid snapping while placing imported image.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13040
2022-11-30 14:38:22 +00:00
98ab078905
Remember conversion strategy.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13043
2022-11-30 14:29:16 +00:00
17bb57cc73
PCB: fix stale ratsnest between moves in Move Individually
2022-11-30 09:11:37 -05:00
03f79f512c
Nullptr safety.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12966
2022-11-30 14:02:22 +00:00
6dc1c9b0b7
Step exporter: filter very small segments when exporting them.
...
very small segments create issues in step export.
Add also more messages and more controls.
Fixes #13038
https://gitlab.com/kicad/code/kicad/issues/13038
Fixes #12905
2022-11-30 14:56:02 +01:00
8dbd6fee00
Go back to smaller chaining epsilon.
...
Using a large epsilon here to allow for sloppy drawing can cause
the algorithm to miss very short segments in a converted bezier.
So use an epsilon only large enough to cover for rouding errors in
the conversion.
Fixes https://gitlab.com/kicad/code/kicad/issues/12951
2022-11-30 13:26:45 +00:00
19eab62516
More safety around ratsnest state.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13011
2022-11-30 13:00:21 +00:00
9fa8b9e49f
Fix memory leak and re-code non-memory-leak so Coverity can understand it.
2022-11-30 13:00:20 +00:00
ec4fd42bee
Pcbnew: force courtyard area shape rebuild afret rotation/flip.
...
Fixes #13039
https://gitlab.com/kicad/code/kicad/issues/13039
2022-11-30 09:07:32 +01:00
8c468dcffc
Use ecoords for distance comparison in PCB grid helper.
...
Fixes a bug where a cursor would jump to a far location while hovering
over some 45-degree tracks.
2022-11-30 08:18:19 +03:00
e4b7bc82be
Prevent UI events during footprint dialog ctor
...
Errors may get thrown when the 3d models are loaded for missing search
paths. This triggers the idle event that makes assumptions about the
state of the dialog. We halt event handling until the ctor finishes.
Fixes https://gitlab.com/kicad/code/kicad/issues/12944
(cherry picked from commit be86e9f57f
2022-11-29 19:39:35 -08:00
81ab8a0499
Properties: Move orientation to basic
2022-11-29 18:56:15 -05:00
41ca2789a6
Get rid of shadowing warning
2022-11-29 18:12:39 -05:00
1a670f4673
Catch IO_ERROR thrown in timestamp gen
...
Missing nickname can throw when generating a timestamp, this should be
caught and prevent further work in the footprint loading (the entry does
not exist)
Fixes https://gitlab.com/kicad/code/kicad/issues/13029
2022-11-29 14:09:22 -08:00
abd818a426
Update msgpanel after entering or exiting group.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13031
2022-11-29 21:33:04 +00:00
31eb91e9e5
Infobar for slow zone auto-refill.
2022-11-29 21:09:16 +00:00
0ee7f8e2bd
Fix 436f95e02e
...
NanoSVG does handle opacity (thanks Mark) but the check needs to be
unsigned if we are comparing the resulting down-shifted value against
zero
Fixes https://gitlab.com/kicad/code/kicad/issues/13033
2022-11-29 11:21:16 -08:00
436f95e02e
Don't look for alpha in nanosvg color
...
Nanosvg colors are only RGB, so we will never get an alpha value here.
Fixes https://gitlab.com/kicad/code/kicad/issues/13033
2022-11-29 10:44:03 -08:00
b6bd74d822
Replace single zone fill under "draft" terminology.
...
Also sets Autofill Zones to default to on.
2022-11-29 18:13:36 +00:00
5fc5a2132b
Fix Properties panel to reference the correct frame
...
The properties editors are global but the frame that they reference is
not static, so we need to be able to update the frame reference when
restarting pcb editor from the main window. This updates the frame,
being careful to remove the signalling when closing pcbnew but keeping
the instance of the editor in place.
Fixes https://gitlab.com/kicad/code/kicad/issues/12297
2022-11-29 09:24:41 -08:00
ad6ef35c9f
PCB: Add skip action to Move Individually
2022-11-29 15:42:03 +00:00
6d52601241
Update stale tooltip.
2022-11-29 15:21:20 +00:00
b2177718a1
Tighten up refresh logic for net & netclass references.
...
Also tightens it up a bit for text variables which can reference things
like netnames and netclasses, but also board settings.
Fixes https://gitlab.com/kicad/code/kicad/issues/13032
2022-11-29 15:18:36 +00:00
8260f0ee13
Add support for unitless values to PCB_EXPR_EVALUATOR.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13016
2022-11-29 14:24:20 +00:00
25d5defc10
Add cli for "fp" upgrade
2022-11-28 20:48:14 -05:00
bd40684ecd
Handle polygons' triangulation
...
Graphic polygons may be invalid and so need to be explicitly simplified
before triangulation.
Also clean up hole handling in triangulation routine
2022-11-28 15:46:12 -08:00
8165fc6c44
Give up trying to infer what kind of polygon the user wants.
...
In many instances there are 3 valid answers: mimic linewidths, use
centerlines, and build a bounding hull.
Fixes https://gitlab.com/kicad/code/kicad/issues/12950
2022-11-28 22:12:53 +00:00
137b4de1c2
Allow groups in groups
...
This was allowed in the qa test, so we allow it going forward
2022-11-28 11:28:31 -08:00
4a4fab78a3
PCB: allow swap while moving
2022-11-28 14:16:08 -05:00
3042633f4a
PCB: block unroute and move individually when already moving
2022-11-28 14:16:08 -05:00
259e41be2d
Don't add non-groupable items to the group
...
Things like markers and netinfo should never get added to the group,
even if we are inside the group while adding the items
Fixes https://gitlab.com/kicad/code/kicad/issues/13026
2022-11-28 09:11:20 -08:00
d232ade752
Remove cloned items from groups
...
When destroying, the group must be null and there's no group purpose in
the DRC checks
2022-11-28 09:11:20 -08:00
eb19e32b40
Performance optimization for pad drawing.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12999
2022-11-28 13:20:12 +00:00
b2b3f5752f
Properties: Add grouping and sorting by creation order
2022-11-27 22:40:23 -05:00
64f315c649
Move properties panel to widgets with the other AUI panels
2022-11-27 22:40:23 -05:00
3460c50afa
Attempt to avoid double-free when shutting down on Windows
2022-11-27 16:21:06 -08:00
5bbe21f540
Properties: don't rebuild the panel when closing an editor
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/12984
2022-11-27 14:29:16 -05:00
c0ab2258a4
Update LAYER_PAD_FR when F_Cu colour changes (and same for back).
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13012
2022-11-27 18:55:00 +00:00
ec9c6a8053
Separate creation of polygons for open and closed shapes.
...
This allows us to create a bounding hull from an open shape-line-chain,
which is useful for defining milled slots.
2022-11-27 18:29:41 +00:00
740e193871
Increase bounding box of stroke text and the leader box of all text.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13009
2022-11-27 15:27:30 +00:00
1e3186b9cb
Allow pad-to-copper-graphic collisions in net-ties.
...
This is done under the same conditions as track-to-copper-graphic --
the pad or track must also collide with a net-tie pad, and the pad or
track to copper-graphic collision must be within the boundary of said
pad.
Fixes https://gitlab.com/kicad/code/kicad/issues/13008
2022-11-26 15:04:33 +00:00
3f50199dad
TEARDROP_MANAGER: fix a corner case that generate a invalid teardrop polygon.
...
Also add a better handling of connected tracks when searching for a track connected
to a too short track to create a teardrop, search was stopped to Y connections.
Now the selected track is the longest of these 2 candidates.
Fixes #13006
https://gitlab.com/kicad/code/kicad/issues/13006
2022-11-26 14:37:20 +01:00
86d7638f10
Fix typo.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/13005
2022-11-26 10:45:07 +00:00
b3559ae12c
Minor fix: make DIALOG_EXPORT_STEP_PROCESS_BASE correctly re-sizable.
2022-11-26 07:40:48 +01:00
74a2e4cad9
Properties: Add support for zone connection style
2022-11-25 18:44:02 -05:00
96fe93618e
Properties: Stop sorting by name
...
It's more useful to have properties shown in add order,
since we can group them
2022-11-25 16:29:56 -05:00
611c19016f
Properties: add support for string escaping
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/12975
2022-11-25 13:15:46 -05:00
5061f0556f
Properties: implement ellipsization for name column
2022-11-25 12:37:47 -05:00
220ef6fb44
Properties: Add some missing footprint properties; cleanup
...
Add concept of "internal" properties that will be accessible from
Python/DRC but not shown in the Properties Manager
2022-11-25 12:37:47 -05:00
4aff5c7618
Keep courtyard caches alive during move.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12999
2022-11-25 17:20:11 +00:00
fbc321c4c1
Fix initialization order
...
This avoids a conditional branch on an uninitialized value in valgrind.
2022-11-25 16:00:23 +00:00
8c7691fbc3
Harmonize on "Manager" for now, since we use that in the docs
2022-11-25 09:13:23 -05:00
bbea5b3fbc
Save and restore properties and search panel sizes
2022-11-25 09:11:30 -05:00
308576b78d
Properties: Use parent footprint references instead of UUIDs
...
Also remove redundant Net Name property (Net is used)
Fixes https://gitlab.com/kicad/code/kicad/-/issues/12334
2022-11-24 22:40:45 -05:00
11e784cf10
Properties: specialize layer setting for footprints
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/12480
2022-11-24 22:11:26 -05:00
88495e5be1
Properties: Fix masking of layers for non-copper items
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/12884
2022-11-24 20:34:40 -05:00
7a9467b0d5
Get rid of some gcc warnings
2022-11-24 17:05:58 -05:00
32836da14b
Don't show annular rings controls for vias that span only a single layer.
2022-11-24 18:05:37 +00:00
d6ae915616
Pay attention to layers when sorting pads.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10143
2022-11-24 15:47:10 +00:00
47d86e5d9e
Don't crash when canceling graphics import
...
Grouped graphics need to have their group removed from the preview
before deleting the elements to avoid reading freed memory when
redrawing
2022-11-23 16:21:06 -08:00
16db0440ba
Fix logic that was accidentally flipped in earlier commit.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12962
Fixes https://gitlab.com/kicad/code/kicad/issues/12969
2022-11-23 23:10:28 +00:00
1aad2fb37b
Change via keep-start-end to be start/end, not top/bottom.
...
The implementation used to always check F_Cu and B_Cu, rather than
where the via started and ended (which will be different for blind/
buried vias and microvias).
2022-11-23 21:37:50 +00:00
5de4bfde93
Move drilled NPTH holes to hole-clearance checking. Edge-clearance
...
checking is just for milled holes (slots).
Fixes https://gitlab.com/kicad/code/kicad/issues/12980
2022-11-23 13:31:51 +00:00
e62463b52b
Don't store optimized anchors in CN_ITEMs.
...
It appears that multiple RN_NETs can refer to the same CN_ITEMs meaning
that we run into threading problems if we modify the CN_ITEM.
Fixes https://gitlab.com/kicad/code/kicad/issues/12968
2022-11-23 00:46:06 +00:00
60d42a7b1e
Spelling: fix various suppress misspellings
2022-11-22 13:47:10 -05:00
b42d5da07d
Check keepTopBottom when determining whether or not to flash a pad/via.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12961
2022-11-22 18:18:43 +00:00
8b1ffca7fa
Better reporting of nets and netclasses.
2022-11-22 14:54:08 +00:00
97fd99ec99
Re-resolve netclasses after assigning netclass to pattern.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12965
2022-11-22 14:54:08 +00:00
9403b5ce99
Unescape strings in search panel
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12963
2022-11-22 05:51:31 -08:00
50089ce558
Fix errors in handling of std::shared_ptrs.
...
We can't reset to a pointer owned by another std::shared_ptr.
2022-11-22 13:14:00 +00:00
226529235c
Mostly const safety, but also performance opt. by avoiding shared_ptr overhead.
2022-11-22 12:21:30 +00:00
740dbdf09a
De-initialize propertygrid when done
...
There doesn't appear to be a nice way to de-register wxPropertyGrids, so
we need to reach into the singleton and remove our registered editor.
Fixes https://gitlab.com/kicad/code/kicad/issues/12297
2022-11-21 16:36:00 -08:00
0e818360c4
Unescape netnames in search panel
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12960
2022-11-21 15:47:14 -08:00
50ecb5b498
Remove errant printf
2022-11-21 15:19:45 -08:00
11130bfd88
Backing out earlier fix in favour of fixing std::shared_ptr usage.
...
Assigning to a reference to a std::shared_ptr does not update the
reference to a different std::shared_ptr; it changes what the
std::shared_ptr points to.
Fixes https://gitlab.com/kicad/code/kicad/issues/12968
2022-11-21 21:56:17 +00:00
106508f266
Split ratsnest optimization into separate parallel threads.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12968
2022-11-21 18:50:44 +00:00
3b31955d98
Get hit test in group members
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12957
2022-11-21 09:28:49 -08:00
01138a2e19
Fix fillet action for lines
...
Generalize fillet action behavior to all straight lines in pcbnew
Fixes https://gitlab.com/kicad/code/kicad/issues/4742
2022-11-21 07:01:14 -08:00
c1510f07d8
Fix some issues with group bounding boxes.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12958
2022-11-20 23:57:36 +00:00
0120df014e
Give group the right parent when pasting.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12954
2022-11-20 22:52:06 +00:00
12a55f20d3
Fix a mistake in grip margin.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12952
2022-11-21 00:25:19 +05:00
dd2f19ca5f
Allow router cursor snapping to points on the arc.
...
Also don't disable grid snapping when holding Shift over arcs.
2022-11-20 16:56:25 +05:00
110bc6abd1
Fix router cursor glitching on H/V track segments.
...
Also don't disable grid snapping when holding Shift over tracks.
2022-11-20 16:56:25 +05:00
c5fe265eb4
Take axis inversion into account when importing graphics. Fixes #9351 .
2022-11-19 17:25:27 +01:00
9b2606018e
Fix shadowed variable.
2022-11-19 11:53:33 +00:00
bab2b6c4b6
Don't assume a 1:1 map between Altium and Kicad nets.
...
We've found at least one Altium board which has duplicate netcodes
for the same net.
Fixes https://gitlab.com/kicad/code/kicad/issues/12909
2022-11-19 11:53:33 +00:00
b82ec9595a
Allow board importing into project.
2022-11-19 11:53:33 +00:00
035031d902
BOARD_CONNECTED_ITEM::GetShortNetname(): protect against nullptr.
...
m_netinfo was not tested against nullptr in this method, although it is
tested in all other places.
2022-11-19 11:16:47 +01:00
9f0c03db94
Export STEP dialog: Fix outdated text (virtual components). Replaced by
...
"not mounted components" and added a tooltip.
No actual code change.
Fixes #12922
https://gitlab.com/kicad/code/kicad/issues/12922
2022-11-19 09:31:37 +01:00
126d224e44
array_creator: Transform item before adding, modify only the first one.
2022-11-19 04:07:35 +05:00
11dddefd05
Implement GetEffectiveShape for groups.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12940
2022-11-18 21:13:23 +00:00
38fd1c9985
pcbnew: Improve performance when something is selected.
2022-11-19 01:53:30 +05:00
c409646aad
Update message panel after rebuilding connectivity.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10122
2022-11-18 15:29:16 +00:00
24c271d508
router: GetUpdatedItems() now returns an unique_ptr to the temporary NODE so that the items it owns do not get deleted upon return from the method
2022-11-18 15:14:33 +01:00
644c76b9c6
router: follow up via force propagation interface changes in the via DRAGGER
2022-11-18 15:14:09 +01:00
dcfb35f002
router: more resilient via force propagation
2022-11-18 15:14:09 +01:00
3960f48b5d
Fix a fatal compil error on gcc.
2022-11-17 08:39:42 +01:00
bba6d503d4
Don't keep value of user or grid anchors between invocations.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12065
2022-11-17 00:51:52 +00:00
5e7c4b734c
Small optimizations in DRC and SHAPE_POLY_SET.
2022-11-17 02:10:22 +05:00
3dea146488
router: Clear rule resolver caches on routing/dragging start.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12907
2022-11-17 02:10:21 +05:00
3f790d9dae
Revert "router: Disable writing clearance cache for items in local variables."
...
This reverts commit 6d71f27500
2022-11-17 02:10:20 +05:00
cefc5268ab
Allow pads in selection and filter them for free-pads later.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12912
2022-11-16 18:37:40 +00:00
6d71f27500
router: Disable writing clearance cache for items in local variables.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12907
2022-11-16 21:19:56 +05:00
1b3f03a800
Don't feed wxWidgets negative column widths.
2022-11-16 13:33:55 +00:00
13f5c78e89
More tightening of group parent lifecycles.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12908
2022-11-16 00:42:38 +00:00
26a38797c7
router: log and replay the 'unfix' events too
2022-11-15 23:05:53 +01:00
b507c44d74
router: fix regression in Backspace (unfix/undo last segment) caused by redesign of the line placement algo
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/12835
2022-11-15 23:05:53 +01:00
f9bfb8534f
Fix orientation of track netnames.
2022-11-16 00:43:06 +05:00
5759a3a10a
Fix copy/pasta from previous commit.
2022-11-15 16:01:24 +00:00
f13ffa8276
Step export: fix incorrect export of a pcb with multiple main outlines.
...
The code was existing but did not work fine with more than one outline
Fixes #6684
https://gitlab.com/kicad/code/kicad/issues/6684
2022-11-15 16:37:00 +01:00
9724f6e736
Don't allow zone filling during other editing operations.
...
It's a very heavy op, and is likely to violate all manner of
assumptions the other ops make.
Fixes https://gitlab.com/kicad/code/kicad/issues/12736
2022-11-14 23:39:49 +00:00
93c6d99a6d
Move saving preferences out of the destructor.
...
For other reasons we wrap the adapters in a wxDataObject, which has
delayed destruction semantics, but that means the settings stuff may
no longer be around when the d'tor executes.
Fixes https://gitlab.com/kicad/code/kicad/issues/12371
2022-11-14 20:01:37 +00:00
bc0a753238
Slight improvement to overly-wide checkbox columns.
2022-11-14 20:01:37 +00:00
e85a84b8a3
Fix the step export for now
...
Need to fix argparse to handle single quotes and double quotes better
Fixes https://gitlab.com/kicad/code/kicad/-/issues/12899
2022-11-14 07:31:23 -05:00
f51db4e093
Fix some Coverity and compil warnings.
2022-11-14 09:02:40 +01:00
50dcf258e6
Adjust the position file comment header
2022-11-13 18:43:49 -05:00
d3606cb4e4
Fix position export job not running
2022-11-13 18:42:23 -05:00
f4944f0db3
Quiet clang getting its knickers in a knot over case fallthroughs.
2022-11-13 23:01:48 +00:00
9d8fdd8d53
Fire selection events from SelectAll().
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12896
2022-11-13 22:59:21 +00:00
cedef5912e
Link to zlib for pcbnew due to step
2022-11-13 17:58:41 -05:00
126914859a
Use correct pad to die lengths in DP length tuner.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12859
2022-11-13 21:07:09 +00:00
ea83449ef7
Change up the step export arg handling to single quote for now
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/12890
2022-11-13 11:49:20 -05:00
0a8db3bb88
Fix forgotten handling of origin offsets
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/12889
2022-11-13 09:22:59 -05:00
7089e99f4b
Integrate move individually into move algo so other commands don't choke.
...
Also adds commands to cancel and finish move individually.
Fixes https://gitlab.com/kicad/code/kicad/issues/12750
Fixes https://gitlab.com/kicad/code/kicad/issues/12749
2022-11-13 13:18:42 +00:00
365674dfdf
Footprints in the footprint editor can't be in a group.
2022-11-13 13:18:42 +00:00
6a9a1e6e65
Print hole walls if in colour (and printing real drill sizes).
2022-11-13 13:18:42 +00:00
49ff3513e7
Add missing lib (libz) in lib list to link on msys2
2022-11-13 09:29:48 +01:00
9c5fbdb040
Fix compatibility with OCC version 7.4 and older
2022-11-13 08:18:10 +01:00
066a609b39
Cleanup warnings in the step exporter
2022-11-12 21:52:54 -05:00
3dd2ae762d
Refactor step export to use our normal board processing routines
2022-11-12 21:27:10 -05:00
248181e62d
Fix Coverity and compil warnings.
2022-11-12 16:02:24 +01:00
90238dede8
PCBNEW_PRINTOUT: fix incorrect size of holes printed with the "small drill" option
...
Fixes #12880
https://gitlab.com/kicad/code/kicad/issues/12880
2022-11-12 16:02:24 +01:00
31bad5baaa
Avoid duplicating similar options in print and plot headers
2022-11-12 16:02:24 +01:00
348c3d4216
Fix an incorrect calculation in length tuning tools.
...
MEANDER_PLACER_BASE::lineLength wasn't calculating the length correctly
when starting and ending pads were on different layers.
Naturally, now jointA corresponds to the start of the path, jointB to the end.
Fixes https://gitlab.com/kicad/code/kicad/issues/12881
2022-11-12 13:11:27 +00:00
d9987e9569
Orig_items will have been invalidated by Revert.
...
Don't use it to rebuild the selection. Use the board_item flags instead.
Fixes https://gitlab.com/kicad/code/kicad/issues/12882
2022-11-11 22:57:38 +00:00
138f835672
Retire group bbox cache.
...
It's too hard to maintain when changes to other items (the groups
members) affect it.
2022-11-11 20:31:31 +00:00
3fc727bb91
Clear selection before deleting objects during conversion.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12879
2022-11-11 17:53:01 +00:00
03ba14c6d3
Tighten lifecycle management of parent group pointers.
...
Also adds some debugging to try to catch dangling pointers.
Also adds a cache for group bounding boxes (which will be expensive
to calculate for large groups).
Fixes https://gitlab.com/kicad/code/kicad/issues/12875
2022-11-11 17:27:28 +00:00
0b4fc8f50d
Fix bugs in PCB arc editing.
2022-11-11 15:00:36 +05:00
46d4861187
Use the 45-degree limit button to apply alternative constraint.
2022-11-11 15:00:36 +05:00
8b0f3f1ee7
Set keeping the center as the default arc editing mode.
2022-11-11 15:00:36 +05:00
f846bc833b
Don't error out when enumeration of footprints fails.
...
We still want to load the ones that did enumerate.
Fixes https://gitlab.com/kicad/code/kicad/issues/12864
2022-11-10 13:48:04 +00:00
36eb853570
Formatting.
2022-11-10 13:48:04 +00:00
3e3ed0f3ee
Formatting and naming. (No functional changes.)
2022-11-09 16:31:29 +00:00
da171b9665
0,0 origin isn't an option we give to the user.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12324
2022-11-09 16:20:52 +00:00
3f63f9fc57
Don't prune inner layers of through-hole parts.
...
For historical reasons we've always included ALL inner layers in these
items and changing that has uncovered several latent bugs. Rather
than find all the rest this late in the game, I went back to storing
all inner layers, even those the board doesn't currently have.
Fixes https://gitlab.com/kicad/code/kicad/issues/12863
2022-11-09 15:58:14 +00:00
63f937db85
Don't use drag origin for real drag events.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12763
2022-11-09 13:09:31 +00:00
4066850f37
Use event point to determine if we're still in draggable item.
2022-11-09 13:09:01 +00:00
85e44c2dae
pcbnew, SVG import: fix an issue for SVG files using a CR+LF end of file
...
The issue was in a validity test working only if CR+LF is not replaced by LF
Fixes #10096
https://gitlab.com/kicad/code/kicad/issues/10096
2022-11-09 09:33:51 +01:00
8b7d997a6d
Fix broken refactor
...
Don't trust the automatic refactor. It misses the strangest things
2022-11-08 20:30:30 -08:00
39774463db
Remove extra line
2022-11-08 16:35:03 -08:00
2ada7db282
Update footprint editor's board with changed prefs.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12678
2022-11-09 00:30:39 +00:00
056f45cd70
Fixup most intersecting polygon points
...
Remaining is the intersecting complex pad, so this keeps the error
message when drawing
Fixes https://gitlab.com/kicad/code/kicad/issues/12806
2022-11-08 16:05:04 -08:00
2cfe78170c
Honour selection filter when picking move anchors.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12773
2022-11-08 16:27:18 +00:00
1d7c5dce70
Don't attempt to write zone-connection-layers to footprint library.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12857
2022-11-08 12:13:15 +00:00
9501f4303d
Rename CreateWindow to CreateKiWindow to avoid a collision name with a windows header
...
No code change, but it fix an issue specific to msys2 that bother me when
trying to fix issues with wx 3.0.x version
2022-11-08 12:31:07 +01:00
cb3d215b6a
Fix compil and Coverity warnings.
2022-11-08 11:53:13 +01:00
d8e9436d92
Fix step export not resolving variables
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/12754
2022-11-07 23:21:48 -05:00
cd30da179a
Round out the cli with position file export
2022-11-07 19:53:35 -05:00
be8bbcaac3
Send Selected event even if the result is an empty selection.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12849
2022-11-07 19:47:51 +00:00
b5f62da5d9
Respect synthetic layer visibility when selecting footprint texts.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12850
2022-11-07 19:26:14 +00:00
ae741b93e6
Resore push/pop-less PickerTool.
...
(Functionality was accidentallly lost when we removed the opt command
strings.)
2022-11-07 19:11:12 +00:00
0b3ecdd968
Revert "Fix handling of self-intersecting polygons"
...
This reverts commit ed309e20da
2022-11-07 09:41:56 +00:00
dc6fcc262c
Pcbnew : allows overwriting viewport with same name in appearance manager.
...
Fixes #12765
https://gitlab.com/kicad/code/kicad/issues/12765
2022-11-07 09:11:49 +01:00
be29ab2c76
Need to check enabled as well as visible.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12786
2022-11-06 19:53:57 +00:00
396e220133
Non-visible layers are stored in the GPU so still have to be drawn.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12792
2022-11-06 17:37:29 +00:00
dd94b2d3a7
Rename PROPERTIES to STRING_UTF8_MAP for clarity
...
This class has nothing to do with the properties system
2022-11-06 11:51:52 -05:00
68de92313e
Properties: move to custom editor for distances; refactoring
...
Also fix display of angle values since EDA_ANGLE was introduced
Fixes https://gitlab.com/kicad/code/kicad/-/issues/12290
2022-11-06 11:40:45 -05:00
90c5295a9f
Fix builds on non-Macs.
2022-11-06 15:07:38 +00:00
f706ac06b8
Code cleanup.
2022-11-06 11:17:54 +00:00
b385a4b60a
Implement DarkMode for the Appearances Palette.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11734
2022-11-06 00:34:45 +00:00
a03799c61e
Don't mark collisions on dragged items, only things they collide with.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8965
2022-11-05 21:54:33 +00:00
bb618f2d55
Update pointEditor after cancelled move.
2022-11-05 16:50:54 +00:00
25f06eed8c
Move zone borders back to their "host" layer.
...
Zone borders shouldn't be affected by zone-opacity control; we always
draw them in full layer opacity.
Fixes https://gitlab.com/kicad/code/kicad/issues/12438
2022-11-05 16:50:54 +00:00
0883c0ae64
Remove shadow member variable.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12830
2022-11-05 16:50:54 +00:00
7b0535e63f
My build seems to want to check this in.
...
I thought the compiled files were outside of the tree?
2022-11-05 16:50:54 +00:00
995a153f27
Update nlohmann::json to 3.11.2
...
Also update json_schema_validator to match new deprecations
2022-11-05 10:53:57 -04:00
9fafd6feff
Add missing constraint type to help.
2022-11-05 10:23:12 +00:00
c1f2ca1d8d
Make multiple names of the net on a track
...
Rather than moving the netname around, we want to keep the correct
number of netnames on a track such that there is always at least one
displayed on long tracks even when panning.
This reduces calculation time while keeping the netnames visible
Fixes https://gitlab.com/kicad/code/kicad/issues/12436
2022-11-04 11:49:50 -07:00
c95bd3fc89
Cache LOD for netname redraw
...
When panning, we should only redraw the netnames when they come into
view or go out of view. Caching the LOD provides this preventing
unneeded redraws while still redrawing on zoom changes
Fixes https://gitlab.com/kicad/code/kicad/issues/12436
2022-11-03 13:50:12 -07:00
8bc9d456c3
Fix area selection calculation
...
area was a double value for comparison of large numbers. But the
promotion from int happened after the multiplication (and overflow) for
large images
Fixes https://gitlab.com/kicad/code/kicad/issues/12821
2022-11-03 11:46:40 -07:00
d8ddeea14a
Update errors count when errors are logged.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12800
2022-11-03 17:19:59 +00:00
e33c611488
Replace collision calls with ones that work.
...
I'm not sure why the old calls didn't work, but they reported "no
collision" between two overlapping zones.
2022-11-03 17:19:59 +00:00
13b097396b
More explicit error message for unnumbered pins.
2022-11-03 17:19:59 +00:00
bc45ae1b72
Move a dialog that was hiding in the filetree
2022-11-02 22:30:46 -04:00
a234d5a2c8
common,eeschema,pcbnew: path cleanup
2022-11-02 13:29:52 +00:00
619c340d92
Handle holes when building outlines for copper sliver checker.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12797
2022-11-01 23:33:44 +00:00
1f4e51b008
Be careful of interveneing priority zones when doing divot prevention.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12797
2022-11-01 23:33:44 +00:00
ed309e20da
Fix handling of self-intersecting polygons
...
We allow temporary self-intersection but before committing, we reduce
the polygon to a single outline (optionally with holes)
Fixes https://gitlab.com/kicad/code/kicad/issues/12806
2022-11-01 13:09:11 -07:00
a5d685ff5c
Handle coordinate transforms in properties system
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/12320
2022-10-31 23:01:52 -04:00
c7c4439027
Allow bezier->line/poly conversion
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12778
2022-10-31 12:48:53 -07:00
a0105efc0c
router: major rewrite of shove/walkaround single line placement. An attempt to fix most router blockages/non-45 stray segments and simplar stuff. Also adds a ton of debug geometry cruft.
...
fixes: 12258
fixes: 12067
fixes: 10807
fixes: 10632
2022-10-31 11:38:31 +01:00
70bca1b2d5
router: allow caller to override the 'safety' length limit in WALKAROUND
2022-10-31 11:17:32 +01:00
363d606503
router: improved heuristics in via force propagation algorithm
2022-10-31 11:17:32 +01:00
1ddabd4eaf
router: some extra debug geometry dumps in SHOVE
2022-10-31 11:17:32 +01:00
165b5257e8
router: temporaily disable upper corner count limit constraint in the OPTIMIZER which prevents almost any optimization of shoved lines
2022-10-31 11:17:32 +01:00
e80bdf934a
router: add via force propagation iteration limit as a user-controllable parameter in ROUTING_SETTINGS
2022-10-31 11:17:32 +01:00
247922ca2d
router: LINE::SetShape() should update the attached via position with the last point of the new line shape
2022-10-31 11:17:32 +01:00
3e67b42efd
router: fix another corner case in LINE::Walkaround
2022-10-31 11:17:31 +01:00
65507e7186
router: extend dump format to support automatic regressions tests of interactive routing scenarios
2022-10-31 11:17:31 +01:00
d289130627
fix memory leak and missing switch to "C" locale in some handlers
...
PCBNEW_JOBS_HANDLER::JobExportGerber(): disable plot pad holes.
2022-10-31 10:04:01 +01:00
ed4a40ee4f
Save state of appearance panel panes
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9087
2022-10-30 19:46:15 -04:00
0a134788d0
Implement cli for gerber, drill, pdf export of pcb
2022-10-29 11:56:10 -04:00
8d44c770a8
board_commit.cpp: Avoid generating a wxAssert message in QA test.
...
In QA test, frame and selTool are nullptr.
So we cannot use wxCHECK( frame && selTool,...) because it breaks the QA test.
We just test frame and selTool when needed.
2022-10-29 16:28:57 +02:00
aca3329469
Remove superfluous Simplify call
2022-10-28 17:01:36 -07:00
01b4c20c94
Router only owns message panel when routing.
...
Also fixes a pair of copy/paste error not caught earlier.
Fixes https://gitlab.com/kicad/code/kicad/issues/12780
2022-10-28 22:51:43 +01:00
e1af4c5cf6
Pcbnew move item dialog layout improvements.
...
Don't use wxBU_EXACTFIT to define the reset buttons. On GTK, there is no
border around the button text which does looks cramped and inconsistent
with the other buttons.
2022-10-28 14:27:35 -04:00
3b3e6de515
Disable mirror commands when a single footprint is selected.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12752
2022-10-28 19:20:24 +01:00
7a874255c5
Be smarter about canceling fills
...
Handles cancellation in main fill loop. Allows loops to finish without
restarting new ones. Further enhancement might allow breaking threads
cleanly but this gets 90% of the cases
Fixes https://gitlab.com/kicad/code/kicad/issues/12693
2022-10-28 10:17:58 -07:00
24f8bf2adf
Clear Editing Board Footprint message when loading new footprint.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12783
2022-10-28 15:59:03 +01:00
78db69bb48
Don't append '+' when modifier used on its own.
2022-10-27 18:03:07 +01:00
f6c441c434
Viewport switcher keys are platform-specific.
...
Also fixes a regression where ctrl-tab doesn't get recognized.
Fixes https://gitlab.com/kicad/code/kicad/issues/11778
Fixes https://gitlab.com/kicad/code/kicad/issues/10127
2022-10-27 14:28:11 +01:00
ef17ee3384
Tooltips for layer & viewer presets.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11778
2022-10-27 14:27:19 +01:00
6a0db3e7e2
Fix Coverity warnings.
2022-10-26 14:39:44 -04:00
a7e1f668a7
Some cleanup of the cli functions
2022-10-25 23:26:23 -04:00
2b8a29b662
Try and make the svg command handling warn a little, also default the output
2022-10-25 20:17:25 -04:00
5f0ebfbfbd
Expose black&white setting for PDF plotting also
...
Also fix an issue plotting tech layers for pads in color
Fixes https://gitlab.com/kicad/code/kicad/-/issues/12740
2022-10-25 19:06:19 -04:00
9380b9a451
Trim pad layers to current board before comparing.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12758
2022-10-25 23:53:10 +01:00
c026c3af7b
Fix typo.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12753
2022-10-25 18:28:31 +01:00
5fe5534822
Clean up layer handling and normalize to remove magic numbers.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12747
2022-10-25 12:31:47 +01:00
f480cbf93f
Treat internal copper layers as side-specific.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12726
2022-10-25 12:08:57 +01:00
20b63f305e
Sim: Ibis improvements and fixes
...
Follow-up after the KIBIS and KIBIS GUI merge requests.
- Move KIBIS from Pcbnew to Eeschema space,
- Make KIBIS obtain the Ku/Kd coefficients via the `SPICE_SIMULATOR` class instead of calling the `ngspice` executable via `system()`,
- Allow to toggle between differential and single-ended model in the GUI,
- Various GUI fixes and improvements.
2022-10-25 09:45:40 +00:00
b058ef2d87
Add the missing black and white setting to Plot -> SVG
2022-10-24 22:46:01 -04:00
960c92634f
Improve logic of Position Relative tool
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/12672
(cherry picked from commit 2d2912c23d
2022-10-24 18:47:38 -04:00
d6fca11419
Finish up work on PlaceFile settings persistence.
...
We were missing several flags, and using the Plot output directory
instead of saving our own.
Fixes https://gitlab.com/kicad/code/kicad/issues/12715
Fixes https://gitlab.com/kicad/code/kicad/issues/12714
2022-10-24 22:23:11 +01:00
fa2a36b74e
Add SMD and TH settings to config, and get rid of intermediate vars.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12715
2022-10-24 19:50:59 +01:00
4778122aa0
Flip anything on a side-specific layer, rather than physical layer.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12726
2022-10-24 16:54:33 +01:00
d06155f6af
Allow the search pane to highlight nets
...
Fix https://gitlab.com/kicad/code/kicad/-/issues/12551
2022-10-23 19:54:12 -04:00
2dec37f806
We must check clearance on all layers of multi-layer items.
...
(One layer may have a custom rule.)
Fixes https://gitlab.com/kicad/code/kicad/issues/12733
2022-10-24 00:14:12 +01:00
cef7cd8f7c
Move default font to RENDER_SETTINGS.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12723
2022-10-22 21:32:42 +01:00
d78b41969f
Fix broken autosave when board is modified.
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/12700
2022-10-22 15:49:03 -04:00
63002cec57
Do not add a title/comment in mandatory field strings when writting netlists.
...
This is mainly for "Sheetfile" property because current it is the only one
that has a title when plotting/drawing it.
2022-10-22 12:50:26 +02:00
ce2dbdec75
Formatting and a bit of cleanup.
2022-10-21 18:41:39 +01:00
d16b23d16e
Name shortening and line-break reduction.
2022-10-21 18:41:39 +01:00
d1bf889e71
Resolve embedded text vars
...
Title Block text variables are embedded into the pcb file and should
be used for resolving when the project file is missing
2022-10-21 08:37:37 -07:00
67985510a8
Fix selecting pads of footprints in groups.
2022-10-21 17:13:24 +03:00
585fac19c6
Copy connected-only and keep-top-bottom properties.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12691
2022-10-21 00:05:11 +01:00
6fd195c389
Use comma to separate diff pair nets/netclassse rather than /.
...
("/" is problematic because it's more likely to appear in netnames.)
Fixes https://gitlab.com/kicad/code/kicad/issues/12592
2022-10-21 00:05:11 +01:00
3451506d25
Slight performance improvement.
2022-10-20 18:37:48 +01:00
323c04af2c
Fix order-of-ops issue with calling collide before tesselating.
2022-10-20 18:37:48 +01:00
6aa515e2f8
board_stackup_manager: fix incorrect behavior when adding a new dielectric layer.
...
Fixes #12680
https://gitlab.com/kicad/code/kicad/issues/12680
2022-10-20 11:27:35 +02:00
e3842514e7
Move courtyard collision setting to preferences.
...
Also cleans up PCBNew/FPEditor edit options panel to be more in sync
with each other.
2022-10-19 11:33:11 +01:00
403cc50e7c
Don't exit group when the cancel went to another tool.
...
Also fixes a bug where the group border didn't get updated immediately
on enter/exit.
Fixes https://gitlab.com/kicad/code/kicad/issues/12669
2022-10-18 17:53:06 +01:00
8d40bf25d6
Need to setup outline mode stuff if it's turned on late.
2022-10-18 14:41:27 +01:00
1f0fa3ef63
Fix bug in new optionally-flashed via/pad zone fill logic.
2022-10-18 14:02:47 +01:00
4633d251a5
Remove single-zone-fill and unfill.
...
These are incompatible with our zone-priority-based algorithms.
2022-10-18 13:45:28 +01:00
437d2c4589
Overhaul of remove-unconnected's zone filling and drawing strategies.
...
1) The highest priority zone that a via/pad collides with "owns" its
connectivity state. Once set, lower priority zones cannot change it --
and in fact, if they would have connected to it are forced not to.
2) The connectivity state goes with the zone fill state, and therefore
must be saved in the file.
3) Display of remove-unconnected's pads is no longer done in GetViewLOD()
(which isn't called for selected items), and is instead done in PCB_PAINTER.
This allows us to draw the full pad in outline mode when a via/pad is
selected which would otherwise only show the hole.
4) Note that in some cases this will still generate DRC errors -- in
particular when a via nearly collides with a higher priority zone it
won't get "owned" by that zone and may therefore have insufficient
clearance if said zone concludes it's unconnected and a subsequent
(lower priority) zone connects to it (causing it to now become flashed).
Fixes https://gitlab.com/kicad/code/kicad/issues/11299
2022-10-18 13:05:42 +01:00
598b09821a
Coverity fixes.
2022-10-17 15:30:20 -04:00
92f1ee556f
Don't fill drawing sheet rects with transparent fill.
...
It might make sense to do that with board and/or schematic items for
hit-testing or something, but it definitely doesn't make any sense for
the drawing sheet border.
Also, when reading in items with a transparent fill, treat them as
unfilled (otherwise we get filled with layer colour in at least PCBNew).
2022-10-17 17:51:11 +01:00
413fd82813
Re-entrancy guard for router tool.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12604
2022-10-17 13:21:07 +01:00
46752499df
We need both a tool-oriented delete and one that doesn't push/pop, etc.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12600
2022-10-17 13:21:07 +01:00
f3bb34779a
TransformTextShapeWithClearanceToPolygon() add optimization for 3D viewer.
...
This function convert a text shape to a set of polygons for the 3D viewer.
Texts shapes are a bit special and can generate a lot of small overlapping polygons.
These polygons are now merged before being added to the list of polygons handled
by the 3D viewer draw functions.
Locally merging polygons is usually not efficient but in this case it can speedup
the 3D viewer (up to 10x).
Mainly noticeable for silkscreen layers when the "copper" thickness is shown
2022-10-17 07:32:30 +02:00
3e53426b6c
Use same ratsnest colours in the router as the rest of KiCad.
2022-10-16 22:21:14 +01:00
e9f8454a67
No DRC engine in footprint editor.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12658
2022-10-16 18:39:37 +01:00
631980b0ab
We were saving the old board pointer, but not updating the current one.
...
This also makes a few other adjustments to order and to where we look
for the enabled layers which should make it more robust.
Fixes https://gitlab.com/kicad/code/kicad/issues/10925
2022-10-16 18:39:37 +01:00
73e1676bdb
Fix const-reference property access.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12639
2022-10-15 20:22:38 +01:00
d1fb32f26c
Formatting.
2022-10-15 19:09:25 +01:00
4af98827fd
Revert change for 11299, and update removed-pad items after zone fills.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12645
2022-10-15 16:06:57 +01:00
b012cc1ac3
Don't resolve footprint text variables in footprint editor.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12658
2022-10-15 16:05:22 +01:00
0d7185c2ff
Fix mismatch between PCB_VIA defaults and file format defaults.
2022-10-15 11:17:58 +01:00
a855c9a40c
Fix not handled exceptions.
2022-10-15 10:27:00 +02:00
8098db2a20
BuildBoardPolygonOutlines: enable multiple main outlines: it works fine in 3D viewer.
2022-10-15 09:33:27 +02:00
697056fa7e
Correctly sort positions for default align
...
When not aligning under mouse cursor, choose the X-most element where X
is top/bottom/left/right. Previous sorting was not correct for two
directions
Fixes https://gitlab.com/kicad/code/kicad/issues/12627
2022-10-14 16:15:06 -07:00
7ffdfb1067
Clear Scintilla undo history after setting initial text.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12650
2022-10-14 22:01:20 +01:00
6f9bc0980b
Refactor poly outline generator to handle multiple outlines.
...
Note: disjoint outlines are handled in footprint courtyards, but not
for board outlines.
Fixes https://gitlab.com/kicad/code/kicad/issues/7660
2022-10-14 20:32:04 +01:00
6357c83a8c
Debug code to try and catch Undo/SyncWorld mismatch.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12640
2022-10-14 13:25:25 +01:00
07d9671126
Repair unbalanced UndoRedoBlock call.
2022-10-14 11:44:04 +01:00
b01bf081d8
Cleanup.
2022-10-14 11:12:25 +01:00
de5980b92e
Share more of the courtyard collision highlighting code.
2022-10-14 10:42:07 +01:00
11dc5424cb
Pull interactive courtyard checker out of move tool to share with router.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12594
2022-10-14 00:48:37 +01:00
8f1b4a9c03
Include cleanup.
2022-10-13 23:15:41 +01:00
3090363cd5
Copy via flags down to the level the router consumes.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12591
2022-10-13 17:41:42 +01:00
46a41e2e34
Pin 0-sized pads at 1um rather than throwing them out.
...
(See bug report for more commentary.)
Fixes https://gitlab.com/kicad/code/kicad/issues/12617
2022-10-13 14:47:50 +01:00
08260661b8
Force flashing when generating SOLIDs.
...
We only have a single SOLID per pad, so the solid's shape must always
be the flashed shape and then we can do layer-specific flashing tests
internally.
Fixes https://gitlab.com/kicad/code/kicad/issues/12458
2022-10-13 13:05:51 +01:00
d1450e1802
Commenting.
2022-10-13 13:05:51 +01:00
8b9cbd5805
Don't reset editPad if it still exists after model reset.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12630
2022-10-13 00:07:30 +01:00
efa14e501c
Cleanup.
2022-10-12 16:36:54 +01:00
d0d625dcb5
BOARD_INSPECTION_TOOL::LocalRatsnestTool(): set a suitable cursor when activated.
2022-10-12 15:56:41 +02:00
bd1114d94d
Move footprint properties dialogs to symbol properties grid resizing strategy.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/9883
2022-10-12 00:38:44 +01:00
e02c05d38f
Add unit and eval support to WX_GRIDs.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/1871
Fixes https://gitlab.com/kicad/code/kicad/issues/4285
2022-10-11 23:40:58 +01:00
c9f11827a7
Don't connect disparate nets
...
Only some elements get their nets assigned based on connectivity. Other
elements should be keps in different clusters for connection
Fixes https://gitlab.com/kicad/code/kicad/issues/12622
2022-10-11 15:03:51 -07:00
57a6aeb86a
Redraw ratsnest after removing teardrops.
...
No, I don't know why this is needed. But after a couple of hours trying
to chase it down, return-on-investment is fading....
Fixes https://gitlab.com/kicad/code/kicad/issues/12420
2022-10-10 21:07:18 +01:00
83310659fd
Basic geometry: R != D.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12601
2022-10-10 19:18:37 +01:00
8470b178cd
Use actual pad shapes or built outline instead of effective shpaes for anchors.
...
The effective shapes don't work very well in the custom pad or rounded
rectangle cases, and they're somewhat slower in some of the other cases.
Fixes https://gitlab.com/kicad/code/kicad/issues/12601
2022-10-10 18:11:32 +01:00
3221877fe8
Push autosave-require down in to EDA_BASE_FRAME.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11790
2022-10-10 14:03:52 +01:00
be6f08deca
Code clarity. (No functional changes.)
2022-10-10 14:03:52 +01:00
b2f05c758b
We don't always have a line when dragging.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12612
2022-10-10 11:44:17 +01:00
ea6fb84351
Formatting.
2022-10-10 11:44:17 +01:00
6bc00eabaf
dialog_dxf_import dialog minor UI fixes
2022-10-10 02:51:24 +00:00
35a14b8e5d
Better error messages (and make an empty pad an error, not a warning).
2022-10-09 20:28:54 +01:00
e866dfe137
Avoid trying to draw empty pads.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12605
2022-10-09 20:28:54 +01:00
4a66203493
Update zone layers for all layers.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12128
2022-10-08 23:27:59 +01:00
3b63ce8a48
Don't use the 3d resolver config anymore
2022-10-08 14:27:10 -04:00
27f8abd8a1
Fix compatibility with wxWidgets 3.0
...
change wxOVERRIDE -> override
2022-10-08 17:34:37 +02:00
faae4f9eea
kicad2step: force immediate printing of messages (mingw issue: we need to flush the stdout buffer)
2022-10-08 16:43:14 +02:00
aaa1d166a7
Redirect step export output to a pretty window
2022-10-08 09:48:00 -04:00
51c20da93e
Areas might have layers defined in area as well as rule.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12584
2022-10-07 23:52:47 +01:00
79dabdd484
Fix typo.
2022-10-07 23:52:47 +01:00
2577ebb94d
Increase dynamic ratsnest opacity for better visibility.
2022-10-07 21:50:12 +00:00
04fec5016b
Add keepout zones set to keepout footprints to footprint courtyard checker.
...
(This is for the move tool, not DRC. DRC uses more sophisticated keepout
processing which is too slow for the move tool, and doesn't let us know which
keepout area collided for collision highlighting.)
Fixes https://gitlab.com/kicad/code/kicad/issues/12594
2022-10-07 22:23:37 +01:00
d6f1d5da76
Start-routing list needs to be a white list, not a black list.
...
We check the collisions later in the same routine, which is where all
the black-listed objects come in.
Fixes https://gitlab.com/kicad/code/kicad/issues/12595
2022-10-07 18:18:02 +01:00
b8dfbe02ad
Fix some issues in STEP exporter
2022-10-07 18:53:31 +02:00
bc58480e24
Missed some other uses of m_startItem in previous commit.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12592
2022-10-07 14:01:46 +01:00
cbb997a3b5
Use GetCurrentNets(), not m_startItem for message panel updates.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12592
2022-10-07 10:34:11 +01:00
01a1d148e6
Make a sentence understandable and translatable.
...
Fix a minor compil warning
2022-10-07 10:11:02 +02:00
165654f114
Expose Switch Arc Posture in context menu.
2022-10-07 08:28:13 +03:00
d26b59a0bf
Improve arc construction using angles from arc geometry manager.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11713
2022-10-07 06:51:00 +03:00
2741d0eb4b
Fix crash on Specctra import.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12583
2022-10-07 03:03:34 +03:00
22917860ef
Move Enter Group for easier access.
2022-10-07 03:03:33 +03:00
098e96f1c7
Use more precise formatting in DRC messages when less precise values are identical.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12587
2022-10-06 22:18:53 +01:00
9119b5072a
Respect DRCEpsilon in diff-pair coupling test.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12587
2022-10-06 22:18:53 +01:00
d6c7f46842
Formatting.
2022-10-06 22:18:53 +01:00
0fea6f5ac3
Fix selection and entering in nested groups.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12586
2022-10-06 21:02:36 +03:00
f818f3a445
Fix footprint rule and zone area anchors
...
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/12575
2022-10-06 15:29:18 +00:00
40ad5b6de3
Broaden reset-sizes-after-layer-switch algorithm.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12576
2022-10-06 15:50:22 +01:00
6927e75eae
Handle keepout areas with holes.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12581
2022-10-06 15:08:56 +01:00
19d270fe74
Text size sanity checking for TEXT_ITEMS_GRID.
...
Oh dear, there was a bunch going on here. Firstly the move from int
to long long int for ValueFromString() means that we were no longer
catching overflows (as we were C-style casting it back to int in many
places). But even when the overflow is caught, it would run in to
wxWidgets' empty string bug while trying to log it.
Fixes https://gitlab.com/kicad/code/kicad/issues/12577
2022-10-06 13:19:08 +01:00
d8a3ba7917
Update router sizes when switching layers.
...
We may have layer-specific rules involved. Note that at some point
we also need to do something similar on every "fix route" step to
handle area-specific rules.
Fixes https://gitlab.com/kicad/code/kicad/issues/12576
2022-10-05 16:45:42 +01:00
6ddc5c1a6e
Fix run from build dir for step
2022-10-05 03:53:56 +00:00
3fe004fd1b
New kicad-cli will now be the cli interface
2022-10-04 22:24:13 -04:00
87171f53c7
Speedup dynamic ratsnest
...
Removes some unneeded calculations and threads the remaining.
Threading was previously removed to avoid overhead issues with small
boards. This is no longer needed with the thread pool implementation
Fixes https://gitlab.com/kicad/code/kicad/issues/12131
2022-10-04 17:06:45 -07:00
a0865082fb
Fix compile warnings
2022-10-04 17:06:45 -07:00
0c7b6c3cbc
fix minor compil warnings
2022-10-04 19:51:51 +02:00
b4f3390626
Drill size is absolute
...
Use hole plating size for visibility only, not zone filling, routing or
DRC
2022-10-04 09:52:40 -07:00
436d75e7f9
Try to reconcile SELECTION and BRIGHTENED use of overlay.
...
For some reason the overlay doesn't get redrawn during the PCBNew
selection disambiguation menu, so we need to not hide BRIGHTENED
items.
Fixes https://gitlab.com/kicad/code/kicad/issues/12547
2022-10-04 17:01:56 +01:00
524a43f95e
Don't select footprints on the wrong side if not visible.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12483
2022-10-04 13:22:06 +01:00
fb8a4c10f7
Shove kicad2step into pcbnew itself with a new cli
2022-10-04 01:53:37 +00:00
b716afd6f1
Clarify various uses of "Center"
...
Distinguish between the english verb "Center" and the noun "Center",
which may be translated differently
Fixes https://gitlab.com/kicad/code/kicad/issues/11109
2022-10-03 12:48:57 -07:00
15d52c91e4
Clear ratsnest when removing nets
...
While we can keep the vector for nets, we need to ensure that the data
are cleared to prevent stale pointer access
Fixes https://gitlab.com/kicad/code/kicad/issues/12564
2022-10-03 09:33:31 -07:00
97d4df4154
Better thread safety for zone boundingbox caches.
2022-10-02 19:30:43 +01:00
adbbceacda
Make footprint type check more narrow, and set default to ignore.
2022-10-02 18:19:43 +01:00
1fc5ecae6e
Minor dialog layout improvements.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12497
2022-10-02 11:45:30 +01:00
a7775bab26
Manage the Search panel visibility state in view menu.
...
Fixes #12533
https://gitlab.com/kicad/code/kicad/issues/12533
2022-10-02 10:20:26 +02:00
7059ef9b89
Store netclass visibility separately from nets
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/10290
2022-10-01 19:54:13 -04:00
e49de68a59
Implement a more durable zone bounding box caching strategy.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10821
2022-10-01 22:10:43 +01:00
6d298b661a
Minor speedup for some dynamic ratsnest cases
2022-10-01 13:43:57 -07:00
d776e908d0
Fix an edge-case in the spoke genration logic for non-cardinal spokes.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12549
2022-10-01 19:31:47 +01:00
7be05e9eb1
Make sure we have nets before grabbing the first.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12554
2022-10-01 13:50:26 +01:00
ba630971af
Possible fix for move/esc/esc crash.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12553
2022-09-30 23:05:55 +01:00
c0a666507c
Work around more instances of the wxWidgets color string locale bug.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12552
2022-09-30 20:56:25 +01:00
f095453d3e
Optimize ratsnest line endings for zones.
2022-09-30 19:04:54 +00:00
a2a442a9f7
Plot Gerber, StartPlotBoard(): display a error message if the layer is not valid.
...
It can happens in Python scripts, when the layer is not set when starting plot,
and therefore the Gerber file header is incorrect.
2022-09-30 18:16:11 +02:00
6a6ef9b1f4
Bring adding-to-group and hiding in sync.
2022-09-30 16:45:00 +01:00
c87a5ff0ab
Remove elipsis from Remove Teardrops.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12550
2022-09-30 13:04:58 +01:00
2372f24cb0
Don't include hidden text in group boundingbox.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12541
2022-09-30 13:02:08 +01:00
c1da59b560
Swap: disallow swapping tracks / wires
...
Also fix missed shortcut change for S -> Shift-S
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/12538
2022-09-29 17:04:43 -04:00
b6efb88ee9
Fix logic error when filling zones.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12542
2022-09-29 17:46:24 +01:00
d67437a2aa
Move ratsnest exclusion processing to a post-pass.
...
Also fixes a few cases where we were unnecessarily rebuilding
connectivity more than once for an operation.
2022-09-29 17:08:49 +01:00
b5dfa4e2fb
Fix not handled exception, creating a crash.
...
Fixes #12536
https://gitlab.com/kicad/code/kicad/issues/12536
2022-09-29 13:08:23 +02:00
7e486327d9
Ibis differential and PRBS models
2022-09-29 08:35:01 +00:00
9894acea76
Spelling
2022-09-28 17:09:43 -07:00
4095172259
ADDED: Pack and Move Footprints, improved footprint spread algorithm.
2022-09-28 13:37:23 +00:00
b6eb5f721a
Remove old rect placement algorithm.
2022-09-28 13:37:23 +00:00
ba6afafc86
Router Tool: get rid of getNearestRatnestAnchor
...
Unused now that the PNS Router handles the actions that needed it.
2022-09-28 13:29:52 +00:00
6252840abd
PNS/Router Tool: Refactor Continue From End
2022-09-28 13:29:52 +00:00
1be0deb58f
PNS/Router Tool: Refactor Finish Route
2022-09-28 13:29:52 +00:00
b1f2273bc6
PNS: Add CurrentStart() to placers.
2022-09-28 13:29:52 +00:00
dcc325b3b2
More about fix compil issues and warnings, especially in ibis code.
...
A few are msys2 specific and due to include files order.
2022-09-28 11:26:07 +02:00
7d20418d6f
Fix compil issues and warnings, especially in ibis code.
2022-09-28 09:55:00 +02:00
5b9fcc0ba0
Cvpcb: Reload footprint libraries in CVPCB
...
CHANGED: Reload footprint libraries in CVPCB when footprint library table(fp-lib-table) is updated
2022-09-27 22:58:03 +00:00
3a7068b346
Iterate on a copy of the selection since we're going to delete from it.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12484
2022-09-27 23:54:19 +01:00
6b15231f4b
Add code to set better default layer widths.
...
This affects both the layer count dropdown and the "Adjust dielectric thickness" button. Changing layer widths will now maintain the same total board width and set layer widths to common manufacturer values. Layer widths can be locked (as before) to keep any manually defined values.
2022-09-27 21:24:48 +00:00
528fe4d371
Add Ibis to spice model editor
...
ADDED: IBIS models are now supported in Sim Model Editor
2022-09-27 20:47:00 +00:00
1a812727cb
Fix some logic errors in importing SVG polygons with holes.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11479
2022-09-27 17:45:21 +01:00
dc07ab9df1
Replace PROF_COUNTER with PROF_TIMER in some conditional places.
2022-09-27 14:07:47 +00:00
b70ffddb04
Terminology and coding style.
2022-09-27 12:23:38 +01:00
9e580b3116
Other -> Unspecified and a couple of other terminology improvements.
2022-09-27 12:15:18 +01:00
57a79f3020
Coding standards.
2022-09-27 11:50:14 +01:00
700edb95e3
PCB Actions: Grab Unconnected
...
Grabs the nearest unconnected item for each selected footprint/pad.
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/1986
2022-09-26 16:17:41 -04:00
f4a3062684
PCB: Select Unconnected
...
Selects the all unconnected items for each selected routable item.
2022-09-26 16:17:41 -04:00
e66393c4dd
PCB Tools: Move Individually
...
Allows moving a selection of components one by one.
2022-09-26 16:17:41 -04:00
cfa26fb706
Fix footprint relative path resolution for idf/vrml export
2022-09-25 23:40:25 -04:00
707a598e5d
Prevent a crash due to the 3d preview dummy board stealing setting ownership
2022-09-25 23:04:13 -04:00
c50b4fb04f
Add relative to footprint 3d model path resolution
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/2073
2022-09-25 22:56:16 -04:00
8e96751af2
Strip out and migrate 3d search paths in favor of env vars
...
This mainly stops reading/writing 3dresolver.cfg
We still keep some sillyness for kicad2step for now
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9164
2022-09-25 21:29:52 -04:00
16d5c43c14
Fix shadowed variable.
2022-09-25 22:04:56 +01:00
b4701593fb
Restore parent group pointers on undo.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11914
2022-09-25 21:45:29 +01:00
503385f52e
Don't use FindNamedPad for net-tie logic. It only reutrns the *first*
...
pad of a given number.
Also improves other DRC logic to tighten up the net-tie rules now that
we know which pads are allowed to short with which other pads.
Also removes the "Overlapping pads" DRC violation now that we know
whether or not overlapping pads in a net-tie footprint constitute a
short.
Fixes https://gitlab.com/kicad/code/kicad/issues/12506
2022-09-25 17:38:31 +01:00
05a8650158
Add forgotten save of setting
2022-09-25 12:03:45 -04:00
2490ad1458
Fix search panel not remembering visibility
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/12494
2022-09-25 11:56:41 -04:00
59d62f7df1
Untangle some includes
2022-09-25 11:37:06 -04:00
40ff7cb9bd
Fix some UI element spacing in settings panels
2022-09-25 15:41:39 +01:00
ea259fd093
Remove extra creation of an outline for the soldermask zone
...
The zone class initializes the outline with an empty SHAPE_POLY_SET, so
adding a new SHAPE_POLY_SET outline in the BOARD constructor causes a
leak of the original.
2022-09-25 15:41:39 +01:00
a381a0acb2
Generalize bookmarks to support additional groups and names
2022-09-24 22:35:20 -04:00
6f8205235f
ADDED: Add outline support to schematic PDF and PCB plot
2022-09-24 21:45:48 -04:00
1683e552f7
Add/fix some variable initializations
2022-09-25 00:48:38 +01:00
f6d0fb8eed
Fix copy/paste error.
2022-09-24 20:00:01 +01:00
7e71dc084c
Implement Mirror H/V for tracks and vias.
...
While not that often useful, it's really annoying that it doesn't work
when you *do* find a use-case for it.
Fixes https://gitlab.com/kicad/code/kicad/issues/6853
2022-09-24 19:55:48 +01:00
328cc27020
Add pad-recombining to FPEditor's Cleanup Graphics.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12487
2022-09-24 19:34:06 +01:00
fdb97a46c1
Don't copy items in for loops when not needed
2022-09-24 03:46:06 +01:00
28f836ab5c
Fix overzealous string replacement
2022-09-23 10:56:58 +02:00
58b03b0a1c
Small optimizations.
2022-09-22 17:22:04 +00:00
897135a4f0
Support mirroring on the board too.
...
Also fixes a few bugs in FP item mirroring.
Fixes https://gitlab.com/kicad/code/kicad/issues/2168
2022-09-22 15:05:58 +01:00
f75266d130
Keep selection order in SCH->PCB cross-selection.
2022-09-22 11:43:37 +00:00
839d31d427
Only update properties from a "real" project.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6268
2022-09-22 10:14:08 +01:00
c44e54756a
search panel: fix a crash and a refresh issue after selecting a second item
...
at least on W10/msys2
2022-09-21 19:36:35 +02:00
8eb68ee472
Add pin/unpin context menu to Symbol Chooser and Footprint Chooser.
...
Also moves some more code down into common so it can be shared.
Fixes https://gitlab.com/kicad/code/kicad/issues/12384
2022-09-21 14:45:12 +01:00
25f1f7b0df
Fix a compil issue on GCC
2022-09-21 09:04:31 +02:00
5af00486c3
Set a default floating size for the search pane
...
aui panes unforunately get a default of 0,0 and no attempts to detect a size
2022-09-21 00:06:45 -04:00
ec25463fed
Allow multi-selecting from the search pane
...
Fix https://gitlab.com/kicad/code/kicad/-/issues/12476
2022-09-20 23:58:49 -04:00
dc9909f83f
Show all on empty searches
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/12478
2022-09-20 23:44:42 -04:00
30dbcbbcf5
Only search the current tab on events
2022-09-20 23:38:06 -04:00
1b962a1660
Expand zone info a little
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/12479
2022-09-20 22:16:50 -04:00
35201eac52
Add textboxes to Text tab of search
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/12477
2022-09-20 22:16:50 -04:00
728ef8a61c
Hide properties panel menu entry if flag isn't set
2022-09-20 21:48:38 -04:00
513fc872bb
Support both X and Y mirroring in FPEditor.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12409
2022-09-21 00:16:27 +01:00
0150655ed3
Fix missing DRC check with via
...
When the via is first and not second in our ordering, the hole-copper
clearance was not checked as the track did not have a hole.
We also calculated the NPTH-via clearance incorrectly in the inspector
2022-09-20 13:43:01 -07:00
7f34586c7e
Allow text variable resolution through properties in drawing sheet text.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12473
2022-09-20 15:28:05 +01:00
cf1a411a19
Allow net to be selected with mixed track & via selection.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12412
2022-09-20 11:37:13 +01:00
9b4eb91f12
Zone Fill performance enhancement
...
Don't wait until all zones are filled before tesselating fills.
Tesselation happens on a layer-by-layer basis, so once the zones' layers
are filled, we can tesselate them in parallel with the remaining fill
work
2022-09-19 11:53:50 -07:00
0295090135
Zone Fill performance for overlapping zones
...
When multiple zones overlap each other, we need to synchronize the
filling. This should not wait for all zones to try to fill before
restarting. Instead, zones that cannot be filled because the depend on
another zone finishing are immediately re-inserted into the fill queue.
2022-09-19 10:11:06 -07:00
64a6fc0fd4
Push UNITS_PROVIDER down into a low-level mixin.
...
This allows us to also construct cheap UNIT_PROVIDERs for specific
tasks when necessary.
2022-09-19 17:10:59 +01:00
5990595619
When adding a bitmap, do not clone it during moving.
...
Cloning is not necessary, and is memory consuming.
2022-09-19 17:41:47 +02:00
ca0c9f12e0
PCB Editor: Unroute Footprint
...
Also works on selected pads.
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/1955
2022-09-19 10:37:10 -04:00
9304607624
TOOL_EVENT: make command string non-optional
...
We're getting segfaults in places where this isn't checked. Also, add
some asserts so we can catch bad tool push/pop.
Removes all uses of GetCommandStr() and makes it private.
2022-09-19 10:23:09 -04:00
45d6b4a9fc
Readability improvements.
2022-09-19 11:18:20 +01:00
1566bd8b14
Make sure a collector has a guide before handing it to a client filter.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12460
2022-09-18 18:14:47 +01:00
57f8a248a5
Remove unused settings
2022-09-17 18:03:43 -04:00
97963a2bba
Better after base_units.cpp changes in python stuff.
...
Move an include to kicad.i
2022-09-17 11:21:48 +02:00
71bb7d63d9
Fix isses after base_units.cpp changes.
2022-09-17 10:56:56 +02:00
ece23d434b
Split up Double2Str to a format function to make its use case clear
2022-09-17 00:10:22 -04:00
1e0eca0916
Eyeball swig fix after the units changes
2022-09-16 22:31:52 -04:00
3d5913c825
Remove convert_to_biu.h, merge contents to base_units.h
2022-09-16 21:09:28 -04:00
66e8931405
Remove IU_PER_MM thats standalone
2022-09-16 21:09:27 -04:00
7a5829f8d6
Move IU2Mils
2022-09-16 21:09:27 -04:00
61e11d6896
Strip out Mils2Iu
2022-09-16 21:09:27 -04:00
e6ed275c25
Repoint IU_PER_MILS
2022-09-16 21:09:26 -04:00
33f8161799
Merge in MM_PER_IU to EDA_IU_SCALE
2022-09-16 21:09:26 -04:00
a8613ee80f
Combine Iu2Millimeter & remove PcbMm2iu
2022-09-16 21:09:26 -04:00
8e361e8a15
Be more diligent about checking for zone file deps
...
The outline collision is relatively cheap (especially after filtering
bbox collisions) so check if a zone REALLY depends on another zone
before making it wait. Waiting for zones can really increase the total
fill time
2022-09-16 17:23:06 -07:00
524b129c64
ADDED: Support for explicit DNP field
...
Dims elements shown as DNP. Adds property `dnp` to explicitly denote
parts that should not be populated. These parts are not included in X/Y
files
2022-09-16 22:26:16 +00:00
107f409106
Use router's connectivity algorithm, not CONNECTIVITY_DATA's.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10745
2022-09-16 22:49:20 +01:00
f10fdfc7d7
More delay for netname drawing, and don't run through tracks if it's off.
2022-09-16 22:19:56 +01:00
90bc5c19cf
Performance enhancement for zone filling.
2022-09-16 19:16:15 +01:00
cf1565a16a
Bug fixes for layer expression processing.
...
1) Push a VAR onto the stack, not a resolved value
2) Don't collapse a PCB_LAYER_VALUE to a VALUE during processing
3) Make sure we run overloaded operators from the correct side
Fixes https://gitlab.com/kicad/code/kicad/issues/12437
2022-09-16 14:14:43 +01:00
d9f75556bd
Fix old copy/paste error (from 2017, believe it or not).
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11487
2022-09-16 11:25:27 +01:00
b00178adb3
Nuke base_units from orbit
2022-09-16 04:38:10 +00:00
aa0863cdf4
Don't mirror text on non-physical layers when in flip board view.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10037
2022-09-16 00:46:14 +01:00
ce9adeaf51
Don't set FreeVia when we can't find a net.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12421
2022-09-15 23:16:08 +01:00
19d8dcad8b
Don't hang when filling degenerate zones.
2022-09-15 23:16:08 +01:00
a21d24a4c8
Experiment with loading recent searches into the search menu.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11743
2022-09-15 14:44:02 +01:00
83fb06ff75
Fix compil and Coverity warnings.
2022-09-15 10:50:14 +02:00
da9be1a812
ADDED: Multi-selection cut/copy/paste in symbol editor library tree
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/11505
2022-09-14 22:20:38 -04:00
125ea73adf
Avoid refreshing the search when the panel isn't open
2022-09-14 21:02:00 -04:00
12ee8b5d7c
Improve DRC cross-probing a bit.
2022-09-15 00:45:29 +01:00
0180bcf90a
ADDED: Implement Drag and Drop
...
dropping files to Kicad manager :
*.kicad_pro, *.pro -> open project;
gerber and job files -> open in Gerbview editor;
Eagle and Cadstar files -> open project.
dropping file to schematic editor -> append schematic;
dropping library file to Symbol editor -> add library;
dropping board file to PCB editor -> append board;
dropping library or footprint file to Footprint editor -> add library or import footprint;
dropping ZIP file or gerber files to Gerbview editor -> open files;
dropping sheet file to Drawing Sheet editor -> open sheet.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/11638
2022-09-14 22:28:09 +00:00
78acb4f07f
Fix unintentional typo
2022-09-14 15:14:35 -07:00
26a1114e3c
Avoid Yields when the results are ready
...
We always need to check for calculation results before yielding the
system otherwise we will delay outcomes
Fixes https://gitlab.com/kicad/code/kicad/issues/12228
2022-09-14 13:30:04 -07:00
bd8b737c44
GAL: Do better job at reserving vertices.
2022-09-14 16:07:47 +00:00
397a93029e
Fix some outdated things (mainly about fix_swig_imports.py, useless with swig version 4)
...
Fixes #12414
https://gitlab.com/kicad/code/kicad/issues/12414
2022-09-14 13:36:43 +02:00
2d3b8d6393
Fix logic around Select All inside an entered group.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12411
2022-09-14 12:24:51 +01:00
281b9d405a
ADDED ability to specify where pad number (& net name) go on custom shaped pads.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6627
2022-09-14 11:37:20 +01:00
ecd99633d8
Allow AppendBoard even in project mode.
2022-09-14 11:37:20 +01:00
f91487aa36
Don't overwrite titleblock and pageinfo when appending board.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11650
2022-09-14 11:37:20 +01:00
f304e2d4f6
ADDED: Search/inspect pane
2022-09-14 02:59:57 +00:00
1a023f5dd0
PCB Editor: (Auto)Route Selected (From Other End)
...
3x Selection-Based Routing Tools. Takes a selection of routable objects
and routes them one at a time individually, with an attempted finish, or
from the other end, depending on the action given.
2022-09-13 15:06:36 +00:00
dc20e24c4a
Route Other End: Perform Steps in one Undo Commit
2022-09-13 15:06:36 +00:00
82f8cd72a3
PNS Router IFACE: Add board commit mode control
2022-09-13 15:06:36 +00:00
0a5ca5b485
Display crosshairs in picker tools.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10183
2022-09-13 01:40:43 +01:00
8ae0ddf09d
Move import graphics dialog to UNIT_BINDER.
...
Also fixes a bug where the position gets scaled (because we're
applying it to the imported values, which are automatically scaled).
Fixes https://gitlab.com/kicad/code/kicad/issues/10483
2022-09-13 00:59:56 +01:00
c2643f53cf
Tighter control over lambda capture.
2022-09-12 20:51:15 +01:00
eaccd40c75
Allow vias to connect <no net> tracks even when DRC checking is on.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12403
2022-09-12 20:38:21 +01:00
4f3db82c68
Add debugging support for KiCad2Step command line generation.
2022-09-12 14:30:07 -04:00
37d2addf0e
Icons: add swap
2022-09-12 11:11:49 -04:00
f70e1d0f22
SCH/PCB: Set Swap hotkey to 'S'
...
* Move Add Sheet to Shift+S in Schematic Editor
* Move Set Grid Origin to Shift+S in PCB Editor
2022-09-12 11:11:49 -04:00
de6e368ac6
PCB: Swap Tool
2022-09-12 09:39:43 -04:00
d1af8e7a4b
Fix broken bool PCB_SHAPE::IsType()
2022-09-12 12:38:45 +02:00
57f9d6cb3d
ADDED text variables for pad NET_NAME, NET_CLASS and PIN_NAME.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/6405
2022-09-12 00:55:57 +01:00
95874aeeb4
Allow multi-layer plotting from python.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12314
2022-09-11 23:37:13 +01:00
0df1786456
Improve adherecne to ignored tests.
2022-09-11 19:48:08 +01:00
c16a640477
Improve marker counting and reporting.
2022-09-11 19:48:08 +01:00
cc4e34ef49
Don't sync the world twice in inline router tools.
...
Activate() already clears and syncs the world via PNS::TOOL_BASE::Reset,
so there's no need to sync in InlineDrag and InlineBreakTrack.
2022-09-10 20:49:30 +00:00
5d468ca759
Use MESSAGE_TYPE::OUTDATED_SAVE for read-only infobar messages as well.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12252
2022-09-10 21:27:10 +01:00
b95d9d660d
Move gerbview colors to preferences dialog.
2022-09-10 16:11:24 +01:00
bd919e57bd
Exclude deprecated layers.
2022-09-10 10:44:40 +01:00
f87bf3c46d
Special case up-key so it can get past headers in paged dialogs.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10078
2022-09-10 09:31:27 +01:00
9cf3c529d3
Apply the same accuracy band to connectivity as we use for hittesting.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10745
2022-09-09 21:42:21 +01:00
93670d2b24
Improve support for .wrz files in vrml exporter, Fix error handling
2022-09-09 20:13:50 +00:00
5b3bd9be83
Prune pasted data of non-enabled layers.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11997
2022-09-09 21:02:08 +01:00
f179754118
Implement add-new-on-return for some of our grids.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12335
2022-09-09 13:41:13 +01:00
98e760da93
Coverity-suggested improvements.
2022-09-09 13:41:13 +01:00
ca14697ad6
Fix issue trying to size stuff before it's displayed.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12386
2022-09-08 23:51:05 +01:00
2743fd583f
More improvements to drag tool selection disambiguation.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10745
2022-09-08 23:43:07 +01:00
4efa13a3e3
Change Loss Tg to Loss Tan.
...
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/10699
2022-09-08 16:17:32 +00:00
a619ef9d53
Improve drop-a-knee-selection-to-a-single-segment algorithm.
...
In particular, don't rely on there being only two items in the
collector at the start.
Fixes https://gitlab.com/kicad/code/kicad/issues/10745
2022-09-08 14:10:18 +01:00
9523586bf1
Remove atrophied PCB NO_CONNECTS layer and its colour.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12316
2022-09-08 00:28:31 +01:00
6b3d36b6c3
CONVERT_TOOL: also show the "Create From Selection" menu if a array can be created
...
The "Create Array" sub-menu was recently moved to this menu, so it must me
shown as soon as an array can be created.
2022-09-07 10:53:27 +02:00
d67c81a657
When deselecting items, pick only selected ones.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10292
2022-09-06 19:44:29 +00:00
fa3e9efdce
PCB Router: return to original active layer after routing
...
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/12313
2022-09-06 10:51:46 -04:00
68f71e4a62
PCB Router: Pressing V again can untoggle Via
...
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/12315
2022-09-06 10:51:46 -04:00
565b815250
3D models list in footprint properties: fix issue when a lot of 3D models is added
...
Fixes #10014
https://gitlab.com/kicad/code/kicad/issues/10014
2022-09-06 16:28:46 +02:00
8afc1db7a6
Property popups for symbols, labels, sheets, and footprints in PDF.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/5521
2022-09-06 13:59:52 +01:00
7c83c78afe
Allow free pad usage in router.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11730
2022-09-06 13:59:52 +01:00
3534cfbba8
Allow a single net collision with a free pad.
2022-09-06 13:59:52 +01:00
16b4f96405
Centralize no-connect- and free-pad processing.
...
Also makes the track-net-names less squirrelly around the viewport
edges.
2022-09-06 13:59:52 +01:00
e294fe2074
ADDED: Dynamic field columns in symbol chooser
...
CHANGED: Symbol chooser search now considers custom symbol fields
Visible columns can be controlled in database libraries.
In standard KiCad libraries, we show columns for all custom fields for now.
Customizable column visibility will be added in the future.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/11946
2022-09-05 16:38:14 -04:00
963a17f5b5
fix a compil warning
2022-09-05 18:33:17 +02:00
156755e9db
Allow processing of non-handled events in length tuner tool.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11425
2022-09-05 10:57:07 +01:00
c0ba1b35bf
Remove SMD pad side sanity check.
2022-09-05 10:41:37 +01:00
895a8a8dbc
Work around focus issues for status popups.
...
Autoscroll wasn't working on Mac because the status popup's panel
has the focus. This *may* also fix a problem on MSW of the auto-scroll
not being cancel-able.
Fixes https://gitlab.com/kicad/code/kicad/issues/11425
2022-09-04 21:08:01 +01:00
9405817a4d
Improve contrast of status popup text on Mac.
...
Also works around an issue where GetBackgroundColor() returns black
(with a 40% alpha) on Mac.
2022-09-04 21:08:01 +01:00
d5cf7828fa
ADDED footprint checks for SMD pad consistency.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11736
2022-09-04 10:34:32 +01:00
2d203bc975
Don't move items inside a group: move the whole group instead
2022-09-04 00:59:57 +02:00
fa5dc23797
CADSTAR PCB: Fix regression when loading pads in footprints
...
Zero sized pads can be valid - e.g. a through hole pad
2022-09-04 00:59:57 +02:00
9abf3438b8
CADSTAR PCB: Invert logic for guessing which layer is top / bottom
...
Ensures correct automatic layer mapping is applied to the design in
https://gitlab.com/kicad/code/kicad/-/issues/12349
2022-09-04 00:59:57 +02:00
c961624d43
CADSTAR PCB: Load 2-point polygons as line segments
...
Fixes asserts when loading design from https://gitlab.com/kicad/code/kicad/-/issues/12349
2022-09-04 00:59:57 +02:00
21b3753e9b
CADSTAR PCB: Parse Teardrops
...
Todo: We need to figure out how we will load teardrops. For now
just drop them on import.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/12349
2022-09-04 00:59:56 +02:00
efae2bbb4c
Better feedback for netclass assignment patterns.
2022-09-03 21:33:56 +01:00
c30a557810
ADDED netclass assignment from PCB canvas.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/5975
2022-09-03 19:29:59 +01:00
b791fff963
DIALOG_UNUSED_PAD_LAYERS: minor enhancement: pads and vias can be handled all at once
2022-09-03 10:41:14 +02:00
c15a13963b
Fix Build error: AddLine doesn't exist anymore
2022-09-02 11:17:28 +02:00
22f96bfd11
Re-route m_last_head after routing fails
...
This should ensure the shove state gets reverted
Fixes https://gitlab.com/kicad/code/kicad/-/issues/9023
2022-09-02 09:41:15 +02:00
854acd4c77
Null-ptr safety for diff-pair-coupling test.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12329
2022-09-02 00:49:33 +01:00
09773e3e2e
Make sure dirty flag gets set, and leave save enabled regardless.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11824
2022-09-01 14:27:16 +01:00
9188838e50
RIP EDA_RECT.
2022-08-31 23:57:24 +01:00
b4492e0bd2
More EDA_RECE yeetage.
2022-08-31 17:19:50 +01:00
ebe9617e77
More EDA_RECT expungification, and an attempt to fix the python test.
2022-08-31 17:19:48 +01:00
f17a865593
Move EDA_ITEM hitTest to BOX2I.
2022-08-31 17:18:45 +01:00
2dc6300501
Move EDA_ITEM bounding boxes to BOX2I.
2022-08-31 10:16:55 +01:00
5679b9dbdc
Remove a few EDA_RECT instances.
2022-08-31 01:22:49 +01:00
c7036ae076
Beef up BOX2's API so it can replace EDA_RECT.
2022-08-31 00:44:33 +01:00
0c8787cbb9
Some more wxPoint/EDA_RECT yeeting.
2022-08-31 00:44:33 +01:00
b736460e71
Move optional access from value() to *operator
...
`value()` throws. Where we check for existence, we don't need to use
the throwing version and should just use the unprotected variant
2022-08-30 13:59:39 -07:00
a176bf383e
Properties: pick up single selections
...
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/12302
2022-08-30 13:59:37 -04:00
91fbb5c957
Don't prevent immediate actions while router active
...
Immediate actions that can take place are useful. We should only be
preventing immediate actions while actively routing or dragging
Fixes https://gitlab.com/kicad/code/kicad/issues/12311
2022-08-30 10:31:29 -07:00
63386ba64d
Pointer safety for ERC/DRC dialogs.
...
Also makes the "Edit ingored violations" easier to find.
Fixes https://gitlab.com/kicad/code/kicad/issues/12308
2022-08-30 12:07:19 +01:00
03aa63bd50
Move 5 helpers to EDA_UNIT_UTILS since they aren't iu specific
2022-08-29 20:11:03 -04:00
238c21ed0b
Properties: Special case PCB_SHAPE "Layer" property
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/12304
2022-08-29 23:13:46 +02:00
2ff6a6aee1
Implement and enable option to not shove vias during push & shove routing
2022-08-29 17:32:39 +00:00
2d68cdff94
Better reporting of hole-to-hole clearances and clearance resolutions.
2022-08-29 17:37:49 +01:00
e0f6a6e475
Run hole-to-hole checks on Edge_Cuts layer.
...
Also makes the flashing logic inside PAD::GetEffectiveShape() easier
to understand.
Fixes https://gitlab.com/kicad/code/kicad/issues/12296
2022-08-29 17:37:49 +01:00
f0956e48f2
Make EDA_TEXT common
...
Since EDA_TEXT is a base class, we can just force the child classes to pass the correct iu scaled size
ALLOW_BOLD_THICKNESS removed because it's a pre-custom font holdover
2022-08-29 07:31:03 -04:00
48f77973da
Another try at getting the Link combobox working on MSW.
2022-08-28 23:25:01 +01:00
b886ec728e
Copy shape data when converting PCB TEXTBOX to FP.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12298
2022-08-28 21:34:13 +01:00
77c79b6f6a
Apply searchArea architecture to courtyard functions.
2022-08-28 21:20:03 +01:00
667a54ad86
Retire insideArea in favour of intersectsArea and enclosedByArea.
2022-08-28 18:02:41 +01:00
122a6d7f46
Move hypertext linking to user-page-numbers.
...
Also moves most navigation code to SCH_NAVIGATION_TOOL.
Also changes page number href to anchor syntax ('#foo').
Also adds hypertext processing to SCH_TEXTBOXes.
Also adds combobox with schematic pages to text properties dialog.
2022-08-27 19:17:43 +01:00
840bcffefb
ADDED: Hyperlinks on text items in Schematic Editor
2022-08-27 19:17:42 +01:00
bf964d8678
Commonize page_info by simply making the Iu scale a parameter on call.
2022-08-27 13:36:00 -04:00
029cc65b34
EDA_SHAPE: Remove m_upsideDownCoords hack (Fixes hitTest routine)
2022-08-27 12:51:32 +01:00
3b4c5f0dc4
French translation update
2022-08-27 09:10:02 +02:00
300d92438c
Allow hiding symbol library tables from symbol chooser
...
Hidden but loaded libraries are useful when using database libraries
2022-08-26 20:18:40 -04:00
161775fdbc
Fix another type warning
2022-08-26 20:15:01 -04:00
09511d176c
Quiet Coverity.
2022-08-26 17:05:25 +01:00
146495672e
Utilize our combine_hash routine for multiple hash
...
We should be using the one routine every time we want to build a hash
from indepedent values rather than rebuilding it differently in multiple
places
2022-08-26 08:45:13 -07:00
06786c34d7
Blacklist hashes for 2d integer elements
...
The hash table for integer hashes is extremely limited and places most
elements in the same buckets. This leads to a linear search time for
structures built on this.
This blocks hashes, directing the coder to utilize std::set or std::map
structures instead of hash tables for implementing integer-based
lookups.
2022-08-26 08:43:37 -07:00
1a672aba56
Fix a couple of DRC bugs where the bbox wasn't inflated for largestClearance.
...
Also removes a case of double-testing a pad with a non-plated hole.
2022-08-26 13:22:57 +01:00
909358e643
Make sure pair caches are layer-specific where they need to be.
2022-08-26 13:22:57 +01:00
86944c4f9f
Marginal performance improvements.
2022-08-26 13:22:57 +01:00
f99761e5bd
entirelyInsideArea() prototype.
2022-08-26 13:22:57 +01:00
7baa56528a
Make sure via-gap-same-as-trace-gap gets turned off for board settings.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12236
2022-08-26 13:22:57 +01:00
d351d0c839
BOARD_NETLIST_UPDATER: disable auto refill zones if new footprints are loaded and waiting for placement.
...
Auto refill creates a crash when these footprints are moved, probably due to a partial
connectivity rebuild due to refilling when the connectivity data is not yet finalized.
Fixes #11830
https://gitlab.com/kicad/code/kicad/issues/11830
2022-08-26 10:38:36 +02:00
f1261e71d4
Replace boost::optional with std::optional
2022-08-25 15:50:47 -07:00
a306246558
Fix a few (minor) compil and Coverity warnings.
2022-08-25 20:21:00 +02:00
fb74bdb059
Don't consider rule area zones in priority calc
2022-08-25 10:12:58 -07:00
e661545ecf
Choose the first unused priority value for zones
...
Default the new zone priority value to the lowest available unused
priority. Ensures that, by default, a new zone has a unique priority
level preventing zones from unintenionally shorting
2022-08-25 10:05:30 -07:00
ee95224517
Ensure that teardrops always get filled first
...
Teardrops are, by definition, higher priority than standard zones, so
ensure that they cannot be overriden
2022-08-25 08:54:34 -07:00
418df36790
Avoid teardrops in priority calculation
...
When choosing a new priority value, don't look at teardrops (which have
high priority)
2022-08-25 08:41:14 -07:00
3e4cfab254
Set new zone priority to unique number
...
Previously new zones' priorities were all set to 0. This is almost
always wrong and can lead to unintended conflicts. The new zone default
value is now set to one higher than the largest number on the board.
This is a better default value because it will not conflict with
existing values.
2022-08-24 16:37:57 -07:00
ae86c6f3a7
Don't include text in locked-item-shadow-calc for footprints.
...
And make shadow margins consistent for all objects.
Fixes https://gitlab.com/kicad/code/kicad/issues/11545
2022-08-24 10:30:20 +01:00
fc99b3ba95
Don't link gdiplus everywhere anymore
...
Tested on msys2 which is the only place it would have been buggy
CMake seems to share the gdiplus linkage with the other dependencies automatically now
2022-08-23 23:51:35 -04:00
e0f28fc4e1
Replace wxFindReplaceData with our own container
...
By dropping the flags, we can be strict with options.
Also it makes future usage of search functionality a little more "UI" framework independent
2022-08-23 22:16:51 -04:00
ec51955dad
Remove vestiges of old pad locking system.
...
We now use a session preference (Allow free pads) in the board editor,
and we never supported pad locking in the footprint editor.
2022-08-23 18:02:16 +01:00
e4bb1560c5
Set locale in python save routine
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11006
(cherry picked from commit c3496d61eb
2022-08-23 09:53:18 -07:00
1871812f2b
Consolidate on a more widely used sub-type architecture.
2022-08-23 12:57:55 +01:00
3e451ca516
Add RemoveAllListeners function for future addons
2022-08-22 23:29:04 -04:00
cfb6fcf31a
Do not create panel if disabled
2022-08-22 21:32:33 -04:00
940a15c547
Todo: Properties system doesn't like const wxString& getters
...
Comment out for now
2022-08-22 21:32:33 -04:00
4108099641
Properties Panel: Correctly limit layers for connectable items to copper layers
2022-08-22 21:32:33 -04:00
fe7e665236
Properties: NetName and NetClass should have a space + don't translate "Net"
2022-08-22 21:32:33 -04:00
f5a75a4001
Minor nullptr fixes
2022-08-22 21:32:33 -04:00
f5597238fb
Properties: add color swatch to layer enum
2022-08-22 21:32:33 -04:00
3c6e8aea0f
Properties panel: post-rebase fixes and hide by default
...
Remove layer widget re-added by Orson's rebase
2022-08-22 21:32:33 -04:00
af71d42307
Renamed PROPERTY_TYPE enum names to avoid a conflict on MSYS2
2022-08-22 21:32:32 -04:00
c37c429c75
Rename PROPERTY_PANEL::Update() to PROPERTY_PANEL::UpdateData()
...
The base class (wxPanel) already provides Update() method,
which should not be overridden.
2022-08-22 21:32:32 -04:00
7f00efe6cf
Properties: Fixed conditional properties using enum values in the conditions
...
When wxAny holds an enum, it cannot be compared with an integer due to a
missing conversion function. In such case, conditional properties
compare a raw value rather than wxAny.
2022-08-22 21:32:32 -04:00
f6f6ebd5f9
WIP: Properties GUI
2022-08-22 21:32:32 -04:00
95fd58b25a
Properties meta-data for pcbnew classes
2022-08-22 21:32:00 -04:00
745c94b0a1
Properties (introspection)
...
Introduces classes:
- INSPECTED: base class for types taking advantage of
generic properties system.
- PROPERTY*: meta-data storing information about properties
- PROPERTY_MANAGER: singleton class to get properties data
2022-08-22 21:32:00 -04:00
1e68c353f1
Account for groups in undo of Position Relative To.
...
Also fixes a bug were pads weren't correctly being found for anchoring
the selection before the Position Relative To.
Fixes https://gitlab.com/kicad/code/kicad/issues/11793
2022-08-22 22:33:38 +01:00
4b63c7012d
Silence some clang warnings
2022-08-22 12:54:00 -07:00
3a76d42630
Cross-probing/selection for multiple items (PCB -> SCH)
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10469
2022-08-22 19:33:39 +00:00
f42b66bc1c
Regularize ellipsization of menu and status text.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12257
2022-08-22 17:52:58 +01:00
c72457482c
Fix Eagle plugin footprint QA test issue.
...
Apparently mapping Eagle footprint layers to the KiCad Dwg_User
that were previously mapped to UNDEFINED_LAYER breaks the QA test
and causes the footprint editor to crash when opening Eagle
footprints. This means that the potential data loss issue when
loading Eagle footprints is still in play.
2022-08-22 09:11:30 -04:00
792d7babe3
Performance (std::map -> std::unordered_map) and commenting.
2022-08-22 12:43:57 +01:00
03454684fa
Commenting.
2022-08-22 12:43:57 +01:00
4f0136db3b
Attempt to fix std::initializer_list lifetime issue.
2022-08-21 20:54:41 +01:00
0bc1188897
Fix Eagle plugin board layer mapping issue.
...
The Eagle plugin layers have to be mapped differently depending on
whether a board is being imported or a footprint library is being
cached. Footprint libraries can bypass the manual layer remapping
step that happens when importing a board.
Please note that when loading footprints in the footprint editor
and viewer, all layers that do not directly map to KiCad layers are
put on the Dwg_User layer so that there is data loss. Users will
have to manually remap objects to the correct layer as required.
This is less than ideal but until the footprint library table parser
supports prompting users to remap unknown layers, it will have to do.
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/11839
2022-08-21 14:56:04 -04:00
af34835fdf
Restore removed data
...
Functions and definitions used in Python scripting should not be
removed. Comments in header files should never be removed (only
updated/corrected)
2022-08-20 08:40:08 -07:00
eac3d33266
Keep Footprint Checker info between runs.
2022-08-20 12:28:34 +01:00
28f7221cc3
Allow selection of Footprint Checker markers.
...
(And do a cross-probe to the Footprint Checker dialog.)
2022-08-20 11:30:25 +01:00
8b0efa8ac4
A bit of cleanup from last commit.
2022-08-20 11:14:44 +01:00
aa2ad3b44c
Move KICAD_T[] to std::initializer_list<KICAD_T>.
2022-08-20 10:28:11 +01:00
46df421064
ADDED defined pad groups for net-tie footprints
...
Each pad group is allowed to short nets with other pads in its group.
Legacy footprints with the "net tie" keyword hack will get a single
group auto-created with all the footprint's pads in it.
DRC and the router now allow a track to collide with copper graphic items
while entering a net-tie pad as long as the closest point in the collision
is within the pad.
DRC (and the footprint checker) now check for copper items in the
footprint shorting pads which are not in the same pad group.
Fixes https://gitlab.com/kicad/code/kicad/issues/2265
2022-08-19 18:54:20 +01:00
508df402f6
Cleanup.
2022-08-19 18:54:19 +01:00
a60053c800
selectAllItemsOnSheet(): fix a typo that prevent selection of items in root sheet.
2022-08-19 11:12:16 +02:00
e0fbe2542f
Fix a few compil and Coverity warnings.
2022-08-19 10:53:29 +02:00
3a718385cf
Just match the type to the comparison type on second thought
2022-08-18 22:22:04 -04:00
675938375b
Use a larger data type for min_dist
...
Squared norms are massive and can logically exceed 32-bit ints
2022-08-18 22:19:36 -04:00
b9461f2ba7
Re-enable tests for zones
...
Avoid invalid substantial checks triggered by signed floating point
zeros. Adds a QA check to ensure zone-self checks are maintained
2022-08-18 17:06:29 -07:00
97d7ee1f30
Remove `/` from our forbidden LIB_ID list
...
It is still forbidden from footprint file names but that is handled
separately and it should not be forbidden in symbol files at all
2022-08-18 12:49:40 -07:00
84745a6cdc
Fix wrong number of columns check
...
Signed-off-by: Francois Berder <fberder@outlook.fr>
2022-08-18 11:03:45 +00:00
98b3904c51
Fix reserve call with the wrong source for size
2022-08-16 23:38:08 -04:00
f06e28b7a7
PCB: Finish Route, Route From End
...
Adds restart routing from other ratsnest' end and automatically finish
routing.
Fixes: https://gitlab.com/kicad/code/kicad/-/issues/5051
2022-08-17 03:15:46 +00:00
6cfbf895fc
Make sure parent pos is factored in for polygons.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11945
2022-08-16 17:28:56 +01:00
371f6d917f
Use VECTOR2I::extended_type instead of long, and int for numeric limits.
2022-08-16 12:08:55 +00:00
405be8d15f
Bounds-awareness in Move, Rotate, point editor, drawing tool
2022-08-16 12:08:55 +00:00
b81a3f0533
GetClampedCoords: Better usability for rounding
2022-08-16 12:08:55 +00:00
4d7d367b25
Use KiROUND for BBox calculation, change parameter name, block negative padding.
2022-08-16 12:08:55 +00:00
a3dc38cb32
Update schema versions so we can patch bad data from earlier bug.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12180
2022-08-15 23:48:38 +01:00
759e1a64ef
Fix broken const ref in wildcard
2022-08-15 12:09:30 -07:00
35ac39844f
Clean up some auto usage
...
Don't make new copies of shared_ptr if we can use references. Keep auto
usage down to hard-to-type-out sequences
2022-08-15 11:29:45 -07:00
db91bcbabf
Bump file format version for allow-soldermask-bridges-in-FPs.
2022-08-15 18:03:03 +01:00
1f347582f8
Introduce new marker type so we can track DRC errors on the drawing sheet.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12221
2022-08-15 18:03:03 +01:00
4b3ac52b1d
Fix shadowed variables
2022-08-15 08:03:30 -07:00
9828360759
Remove unused variable
2022-08-15 07:52:53 -07:00
55bb374370
Fix crash when unloading board
2022-08-14 22:49:51 -04:00
c418b25756
Centralize the parseDouble functions in the parsers and gcc specialcase
2022-08-14 18:46:19 -04:00
959681e472
Config Paths help is now inside the dialog, so we don't need quasimodal here anymore.
2022-08-14 22:56:29 +01:00
86938aa425
Read, write and process the board-wide Allow soldermask bridges in FPs.
2022-08-14 22:56:29 +01:00
a9536b5de9
CHANGED netclass assignments now done via canvas or via patterns.
2022-08-14 22:56:29 +01:00
18ac169ac7
Add contexts to EDA_COMBINED_MATCHER.
2022-08-14 22:56:29 +01:00
6b349fdb0a
CADSTAR PCB: Allow remapping all non-electrical layers
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/12196
2022-08-14 22:24:17 +01:00
69d696660b
cadstar: Report warning that imported text may be different
...
Fixes https://gitlab.com/kicad/code/kicad/-/issues/12195
2022-08-14 22:24:16 +01:00
a070959209
Switch from strtod to std::from_chars for performance
2022-08-14 16:19:24 +00:00
2ee65b2d83
Force removal of zero-sized pads on load.
...
Pads with zero width or height cause issues when rendering and
selecting. KiCad has never allowed these elements but hasn't prevented
importing systems where they exist. This prevents their import and
cleans existing designs where the pads are placed
Fixes https://gitlab.com/kicad/code/kicad/issues/12200
2022-08-13 19:10:48 -07:00
1ce8fc1614
Ensure arcs are handled in topology
...
Use the connection-independent `Anchor()` function to get connection
points for either arcs or segments in topology. This allows the
ratsnest to be correctly drawn between nets with arcs
Fixes https://gitlab.com/kicad/code/kicad/issues/12205
2022-08-12 20:07:28 -07:00
488a53e71b
Fix a few minor Coverity warnings
2022-08-12 10:51:36 +02:00
5616ef2e7c
ZONE_FILLER::buildThermalSpokes() fix incorrect spoke shape for pad shapes with offset.
...
Fixes #12201
https://gitlab.com/kicad/code/kicad/issues/12201
2022-08-10 15:27:28 +02:00
d6cd55e133
ADDED esc-removes-net-highlight preference to PCBEditor.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/8760
2022-08-09 08:46:12 +01:00
f695ae5522
Generate const keyword_hash maps at compile time
...
Or else the map gets pointlessly recreated during footprint loading thousands of times
2022-08-09 00:56:49 -04:00
a11f48ef10
Markers provider is no longer responsible for all markers.
...
Unconnected items and schematic partity violations are also now
represented by markers, so the ERC/DRC window itself needs to do
the deep-delete.
Fixes https://gitlab.com/kicad/code/kicad/issues/12182
2022-08-08 22:02:20 +01:00
73402d733e
Add labels for icon buttons. (They're used by screen readers.)
...
Also fixes a bunch of annoying wxWidgets asserts.
2022-08-08 22:02:20 +01:00
4423755176
Pretty up the Teardrops dialog.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12170
2022-08-07 23:22:21 +01:00
015bde8cb0
Test pad:hole violations in footprints as long as not same pad number.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12124
2022-08-07 19:49:39 +01:00
05785ac6b9
Teardrops: use default zone settings instead of last settings set by the zone dialog.
...
Fixes #12171
https://gitlab.com/kicad/code/kicad/issues/
Fixes #12172
2022-08-07 08:52:40 +02:00
509d233d97
Fix knockout text bounding boxes and hit testing.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12133
2022-08-06 00:00:04 +01:00
6a9b821b5c
Fix order of initialization resulting in net assignment getting lost.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12168
2022-08-06 00:00:04 +01:00
ea914eac9a
Pcbnew: fix regression: Display board info when clicking on a empty place.
...
Previously: the displayed info was "Selected Items 0".
2022-08-05 13:49:01 +02:00
129905686f
Fix error in net list sorting
2022-08-04 10:27:01 -07:00
090e70ccd2
ADDED: Have Net Inspector report lengths per layer
...
When tuning high speed traces, you may need to extract data per layer
rather than just the summary as signal speed varies based on dielectric
and trace type
2022-08-03 16:35:58 -07:00
96f01d33c8
Performance improvements.
...
1) Move a bunch of std::map's to std::unordered_map to get constant-time
look-ups
2) Lengthen progress-reporting intervals to spend more time doing work
and less time talking about it
3) Reverse order of SHAPE_LINE_CHAINs in thermal intersection checks to
make (much) better use of bbox caches
4) Don't re-generate bboxes we already have
5) Fix some autos that weren't by reference (and were therefore copying
large datasets)
6) Rename delta progressDelta so it's easier to search for in future
7) Get rid of a few more autos (because I don't like them)
8) Pass large items to lambdas by reference
Fixes https://gitlab.com/kicad/code/kicad/issues/12130
2022-08-03 11:59:42 +01:00
76b9e25143
Cleanup unused code
2022-08-02 08:33:59 -07:00
f0efa9af9d
gen_footprints_placefile: re-add option to negate or not the X coordinate.
...
This option is for footprints on bottom side, and not for Gerber format.
This option was existing in 5.x version, but lost in 6.x version.
Fixes #4638
https://gitlab.com/kicad/code/kicad/issues/4638
2022-08-02 11:22:12 +02:00
f5283c6133
Fix cherry-pick issue
2022-08-01 21:32:56 -07:00
e4ca2408d4
Net Inspector: Handle via layers
...
Rather than measuring the total via height, measure from the entry to
exit track height to get a more accurate distance
(cherry picked from commit 57de5a6b65
2022-08-01 20:25:27 -07:00
e0b3f6c258
PNS: Handle via-in-pad distances when tuning
...
Tuning with a via in pad, the via isn't a part of the full line. But we
still need to account for the line length distance of the
starting/ending vias. To do this, we simply measure the height from
the ending track to the ending pad and starting track to starting pad
(cherry picked from commit 82e8e38054
2022-08-01 20:25:17 -07:00
9a4136de00
Implement annular ring checking for pads.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12109
2022-08-01 17:45:34 +01:00
f3936f24ae
Go back to single-threaded sliver checker.
...
Something was unhappy with the multi-threaded version.
(Note that we still multi-thread the polygon-building, which is the
most expensive part.)
2022-08-01 17:45:34 +01:00
17fdb7c6a8
Prevent drag index from exceeding full line count
...
Simplification removes segments, so we might lose our valid index.
Ideally, we would simplify during the assembly or pass the input index
to the simplify routine to maintain the proper value.
Fixes https://gitlab.com/kicad/code/kicad/issues/12137
(cherry picked from commit 6c617d84ca
2022-08-01 08:58:28 -07:00
5207a8d8b4
Properly scope the island removal enum
2022-08-01 08:58:04 -07:00
9fbf9973be
Remove obsolete IsKeepout and KeepoutAll functions
...
These are superceded by IsRuleArea and the individual keepouts
2022-08-01 08:05:09 -07:00
7556d7152f
Fix errant return and improve progress reporting.
2022-08-01 13:09:51 +01:00
43df863df2
Fix issue with caches not being initialized when printing msg bar.
2022-08-01 13:09:51 +01:00
0304ad4494
Move connection width testing to rule system.
...
Also copies connection width progress reporting architecture over to
the sliver checker.
2022-08-01 13:09:51 +01:00
927bc8141b
Init member variables.
2022-08-01 13:09:51 +01:00
f2f04b1d20
Better progress reporting for thermal connections.
2022-08-01 13:09:51 +01:00
b0a9cea6f6
Better progress reporting, and don't report necks that don't have items.
...
Since we aren't searching zones (they aren't in the m_CopperItemRTreeCache)
this will drop all errors that are zone-only (which are better handled by
zone-min-width).
2022-08-01 13:09:51 +01:00
4bc7c16ce0
Don't auto-fill zones due to DRC marker insertion.
2022-08-01 13:09:51 +01:00
54213bb7f1
Cleanup and move to DRC_ENGINE's status reporter.
...
1) brace formatting
2) get rid of some autos
3) get rid of a dyn_cast that CLion claims is bad
4) use DRC_ENGINE's status reporter
2022-08-01 13:09:51 +01:00
661caf1de9
Make sure new zones are filled when auto-fill is on.
...
Also fixes some issues with enablement of the Remove Islands stuff.
Fixes https://gitlab.com/kicad/code/kicad/issues/12123
2022-08-01 13:09:51 +01:00
6f49b57f9b
Cleanup & performance enhancements.
2022-08-01 13:09:51 +01:00
a8505d9c76
SEARCH_RESULT -> INSPECT_RESULT
...
To fix the name squatting it's doing for future functionality
2022-07-29 20:01:10 -04:00
f0b9e67212
Add ignore-line-widths mode to CONVERT_TOOL.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/5911
2022-07-29 21:39:03 +01:00
753f2f3e4c
Display descriptions in second column of library trees.
...
Also fixes some bugs in how the columns are sized.
Fixes https://gitlab.com/kicad/code/kicad/issues/12090
2022-07-28 14:51:47 +01:00
fc1afa6298
Improvements to convert tool.
...
1) Handle filled shapes
2) If a chained outline can't be found, build hulls of the individual
segments
3) Combine intersecting shapes
4) Simplify code
Fixes https://gitlab.com/kicad/code/kicad/issues/git
Fixes https://gitlab.com/kicad/code/kicad/issues/5911
2022-07-27 18:57:45 +01:00
2bf33321d1
Update constraint mode in status bar during move.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/10465
2022-07-27 18:57:45 +01:00
aabc3b3cc6
FP editor: fix crash when duplicating a footprint.
...
Fixes #12098
https://gitlab.com/kicad/code/kicad/issues/12098
2022-07-27 19:08:27 +02:00
cb6a2552d9
Use the FPEditor's status bar messages for FPBrowser.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11404
2022-07-26 18:45:02 +01:00
4d48376eae
Fix some warnings detected by PVS-STUDIO (not used vars)
2022-07-26 16:00:14 +02:00
ee0f93ed17
Fix some issue with hierarchy panel on OSX.
...
Also moves the option toolbars tight to the canvas for all windows.
Fixes https://gitlab.com/kicad/code/kicad/issues/12087
2022-07-26 14:51:43 +01:00
032708860b
Include both text shapes and border shapes in textbox.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11806
2022-07-25 16:10:08 +01:00
e10158ff10
ADDED show pin names on footprint pads when assigning to symbol.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/4576
2022-07-24 23:41:41 +01:00
1bad72f14f
Remove bad static_cast.
...
(m_settings isn't a PCBNEW_SETTINGS in non-PCB_EDIT_FRAMEs)
2022-07-24 23:41:41 +01:00
82167a7c96
Avoid crashes when, for some reason, a dll cannot be loaded.
...
In this case a null pointer was returned by the internal code.
This pointer is now tested against nullptr to avoid the application crashing.
Fixes #12080
https://gitlab.com/kicad/code/kicad/issues/12080
2022-07-24 19:42:50 +02:00
0604d7b813
Fix minor compil and Coverity warnings.
2022-07-24 09:33:43 +02:00
c16d0603c6
Add fix missing in my commit 8eee7667
2022-07-24 09:10:51 +02:00
fa679d3601
Pinned libs can also be found in program settings.
2022-07-23 20:17:04 +01:00
8eee766791
Fix Cvpcb DISPLAY_FOOTPRINTS_FRAME: some display options not working. Commit 5e4a7041 moved 4 settings used in Cvpcb to a PCBNEW_SETTINGS struct. But in Cvpcb, this config struct does not exist. So these 4 settings are now moved to a section (PCB_VIEWERS_SETTINGS_BASE) common to Cvpcb and Pcbnew config.
2022-07-23 18:45:13 +02:00
f0ef6932b8
Fix issues with plotting textbox outlines.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11943
2022-07-23 13:53:03 +01:00
280ff3ccdc
Fix net highlight command enablement.
...
These always need to be enabled so that the current highlight can
be cleared.
Fixes https://gitlab.com/kicad/code/kicad/issues/12058
2022-07-23 12:42:11 +01:00
9dd3bbf2cb
Change highlight net hotkey default.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12051
2022-07-23 12:34:48 +01:00
bf5e649e44
Fix log errors in new solder masking checking code.
2022-07-23 09:26:04 +01:00
f41af10007
Clean up hole shapes for safety (smart pointer) and consistency.
2022-07-22 23:06:07 +01:00
a2c002e1da
Improve solder mask aperture testing.
...
1) For solder mask apertures report both the aperture and both
exposed items.
2) Don't process solder mask apertures in footprints with the
"bridging allowed" flag set.
Fixes https://gitlab.com/kicad/code/kicad/issues/12064
2022-07-22 23:06:07 +01:00
5442d284f4
Improve strings for highlight net commands.
2022-07-22 09:31:11 +01:00
def87c969e
Redo the pinned-libraries storage architecture.
...
1) always use preferences directly
2) allow nicknames from either preferences or project
3) store-after-modify
Fixes https://gitlab.com/kicad/code/kicad/issues/12000
Fixes https://gitlab.com/kicad/code/kicad/issues/11892
2022-07-22 09:31:10 +01:00
b80fd5329d
Clear dimension pointer after committing.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/11864
2022-07-22 09:31:09 +01:00
004abcd370
Leave originally selected items selected after cancelled move.
...
Fixes https://gitlab.com/kicad/code/kicad/issues/12024
2022-07-22 09:31:08 +01:00
b6b4ae959e
Shuffle around the helper script folders
2022-07-21 19:04:08 -04:00
16e3d40552
ADDED: Display calculated clearance in status bar
...
In addition to showing resolved clearance, we also show the calculated
clearance in the same method as is used for DRC. This will allow users
to better examine their system while working.
Fixes https://gitlab.com/kicad/code/kicad/issues/7934
2022-07-21 15:44:48 -07:00
9b74372f9d
Minor spelling fix
2022-07-21 11:55:44 -07:00
jean-pierre charras
qu1ck
Seth Hillbrand
Jeff Young
Jon Evans
Wayne Stambaugh
Mike Williams
Marek Roszko
Alex
Kliment
Roberto Fernandez Bautista
Chris Morgan
vinsfortunato
Ian McInerney
Simon Richter
aris-kimi
Dag Lem
Felix Schneider
Tomasz Wlostowski
Gary Kim
Greg Davill
lukas-heiligenbrunner
Tanay Gupta
Jan Mrázek
Alexander Dewing
Yang sheng
Graham Keeth
Sylwester Kocjan
Fabien Corona
Scott Hanson
Jonathan Haas
lulu731
Bobbe
Stefan Hamminga
Maciej Suminski
Francois Berder