Uwe Bonnes
24ed65d6b6
src/target/stm32f4.c: Declare CCMRAM only for devices with CCMRAM.
2017-06-09 13:03:26 +02:00
Gareth McMullin
2eb2f8edd7
Use vector_table symbol for assignment of SCB_VTOR.
2017-06-09 13:07:06 +12:00
Uwe Bonnes
a7771fa23f
stlink/swlink: Remove missleading comments.
2017-06-08 18:25:43 +02:00
Gareth McMullin
aaa7b0e38e
Merge pull request #217 from UweBonnes/stm32l4
...
Stm32l4
2017-05-23 12:22:04 -07:00
Gareth McMullin
fd467269eb
Merge pull request #233 from gsmcmullin/parallel_make_fix
...
Fix parallel build.
2017-05-23 12:20:21 -07:00
Gareth McMullin
539d9e14ec
Merge pull request #223 from gsmcmullin/nrf51_c_stub
...
nrf51: Replace stub with C version and pass params in registers
2017-05-23 12:00:08 -07:00
Gareth McMullin
ecc0d9807d
Fix parallel build.
...
Add explicit dependency of command.c on version.h
Remove version.h on make clean.
2017-05-23 11:57:35 -07:00
Uwe Bonnes
91839f3aee
stm32l4.c: Handle options.
2017-05-11 23:31:43 +02:00
Uwe Bonnes
289be4d9db
stm32l4.c: Add STM32L43/L44/L45/L46/L49/L4A.
2017-05-11 23:31:43 +02:00
Uwe Bonnes
8cc2c44dbf
f4discovery: Use Magic constant in RAM for Bootloader entry.
2017-05-11 22:21:38 +02:00
Uwe Bonnes
a0e47c392b
f4_discovery: Clean up platform.h and Readme.
2017-05-11 21:53:01 +02:00
Uwe Bonnes
814eb0e3a2
f4discovery: Make DFU work (again?)
2017-05-11 21:52:24 +02:00
Uwe Bonnes
f5dd3006fb
STM32: Generate same serial number as internal DFU bootloader.
2017-05-11 21:52:24 +02:00
Uwe Bonnes
b7235da97f
dfucore.c: Announce no writable bootloader pages when device is read proteced
...
or bootloader is write protected.
Device read protection or write protection on first 4 bootloader pages
can only be removed by mass erase. Triggering mass erase with a program
running from flash is doomed for failure.
User can force bootloader update, at their own risk to brick the device.
2017-05-07 13:19:37 +02:00
Uwe Bonnes
b09a522f37
STM32F103: Use flash size from device for DFU string.
...
Complements #204 .
STLinkV2-1 has F103CB on board! F103C8 on older Stlinks can use upper flash
with hopefully acceptable error rate.
For F103C8 devices, user has to give the force option to dfu-utils.
2017-05-07 13:19:37 +02:00
Gareth McMullin
94c822cb62
nrf51: Replace stub with C version and pass params in registers
2017-05-03 13:10:01 -07:00
Gareth McMullin
6b592b4118
Merge pull request #218 from stoyan-shopov/breakpoint-removal-bugfix
...
fixed a bug in the breakpoint removal code
2017-05-03 12:11:50 -07:00
Uwe Bonnes
5af76a1b74
dfu_f1/dfu_upgrade: Do not set read protection.
...
As the first 4 pages of the bootloader will always keep write protection
once read protection is applied, with the second update of the bootloader
only the higher pages where updated effectivly.
In most cases this resulted in an inaccessible device!
2017-04-29 14:58:41 +02:00
stoyan shopov
01e3582525
fixed a bug in the breakpoint removal code
2017-04-28 13:22:59 +03:00
Gareth McMullin
b10971b19b
Merge pull request #206 from UweBonnes/dfu-upload
...
Dfu upload
2017-04-27 10:07:37 -07:00
Stefan Agner
3c06396c8e
Constify strings and constant structs
2017-04-22 13:50:04 -07:00
Gareth McMullin
633662dbb3
Hold TMS high during reset.
...
This is a questionable fix for the Kinetis K22F that samples
this pin on release from reset to enable its EzPort which
makes the flash unusable and disables the rest of the micro.
2017-04-21 11:05:07 +12:00
Gareth McMullin
1140ff957e
kinetis: Check/fix security byte on flash done.
2017-04-19 13:55:37 +12:00
Gareth McMullin
06bf37fe20
Merge pull request #208 from gsmcmullin/mem_packet_range_check
...
Add range checking on mem access packets.
2017-04-18 14:17:07 +12:00
Gareth McMullin
08c0cafa09
stm32f4: Translate ITCM addresses to AXIM on flash write.
2017-04-18 12:56:33 +12:00
Gareth McMullin
bd2cfe72f0
Add range checking on mem access packets.
2017-04-18 11:41:11 +12:00
Gareth McMullin
e5395aaba7
Merge pull request #91 from schodet/usb-vbus
...
Fix usage of USB_VBUS
2017-04-18 08:22:57 +12:00
Uwe Bonnes
d796571438
Implement DFU_UPLOAD.
2017-04-15 14:26:03 +02:00
Uwe Bonnes
1d8ebcd75f
Handle SET_ADDRESS according to DFUSE specs.
2017-04-14 15:16:59 +02:00
Gareth McMullin
1f31099d46
Merge pull request #202 from gsmcmullin/tiva_srst_inhibit
...
lmi: Inhibit SRST on Tiva and add some fault checks.
2017-04-13 09:13:55 +12:00
Gareth McMullin
dacf907540
Merge pull request #204 from gsmcmullin/stlink-flash-size
...
Increase st-link flash allowance to 128K.
2017-04-13 09:08:55 +12:00
Gareth McMullin
394fd4894b
Increase st-link flash allowance to 128K.
...
Although the devices are only documented to have 64K flash,
they have been obeserved to have a full 128K, although the undocumented
half may be untested and have problems.
2017-04-13 09:01:26 +12:00
Gareth McMullin
644add19a6
lmi: Add comment explaining SRST inhibit
2017-04-13 08:42:16 +12:00
Gareth McMullin
00183f1a9b
lmi: Inhibit SRST on Tiva and add some fault checks.
2017-04-12 15:52:09 +12:00
Gareth McMullin
e4de689a09
cortexm: Check halt reason on stub exit.
2017-04-12 11:37:42 +12:00
Gareth McMullin
8e2c2757b4
Merge pull request #195 from gsmcmullin/kinetis_work
...
Kinetis stuff
2017-03-28 13:58:00 +13:00
Gareth McMullin
3d2fa6d233
target: Add new targets to end of list.
...
This shows targets enumerated in their natural order,
rather than in reverse.
2017-03-27 14:59:54 +13:00
Gareth McMullin
0ed793fe24
kinetis: Clobber security byte with unsecure value.
...
May be overridden with `mon unsafe enable`.
2017-03-27 14:01:35 +13:00
Gareth McMullin
7de304d72a
kinetis: Add recovery mode target.
2017-03-27 10:51:36 +13:00
Gareth McMullin
bb93af50c3
adiv5: Debug log on failure to read ROM table.
2017-03-27 09:05:37 +13:00
Uwe Bonnes
21f71fd18a
More STM32L4 devices
...
Hello,
appended patch adds more STM32L4xx devices and was tested with L432 Nucleo.
Cheers
--
Uwe Bonnes bon@elektron.ikp.physik.tu-darmstadt.de
Institut fuer Kernphysik Schlossgartenstrasse 9 64289 Darmstadt
--------- Tel. 06151 1623569 ------- Fax. 06151 1623305 ---------
>From e9323a35b667659111226686221a037375a6c208 Mon Sep 17 00:00:00 2001
From: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de>
Date: Thu, 2 Feb 2017 20:12:59 +0100
Subject: src/target/stm32l4.c: Add more devices.
2017-02-07 09:42:30 +13:00
Uwe Bonnes
41fb2a3104
More STM32L0 devices
...
Hello,
appended patch adds more STM32L0xx devices and was tested with L031 Nucleo.
Cheers
--
Uwe Bonnes bon@elektron.ikp.physik.tu-darmstadt.de
Institut fuer Kernphysik Schlossgartenstrasse 9 64289 Darmstadt
--------- Tel. 06151 1623569 ------- Fax. 06151 1623305 ---------
>From fb014dd8a90691056f10fbeffd7f21aaad196662 Mon Sep 17 00:00:00 2001
From: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de>
Date: Fri, 27 Jan 2017 23:09:10 +0100
Subject: src/target/stm32l0.c: Add new categories.
2017-02-07 09:42:30 +13:00
Gareth McMullin
62dedb9824
Add K22F
2017-02-07 09:36:47 +13:00
Gareth McMullin
7ba2987a83
native: Fix macros for setting pin mode.
...
Fixes #184
2017-01-24 10:49:45 +13:00
Gareth McMullin
8c256d9e59
kinetis: Add KL03 devices.
2017-01-17 15:28:47 +13:00
Gareth McMullin
a77fb9ac1b
Merge pull request #180 from paramaggarwal/patch-1
...
Actual pin mappings and the comment differ!
2017-01-09 14:39:06 +13:00
Gareth McMullin
334f6dac0a
Merge pull request #182 from esden/bmpm21
...
Add BMPM V2.1 support
2017-01-09 14:38:33 +13:00
Gareth McMullin
cd1bef89bb
adiv5_dp_init: make ctrlstat volatile to supress warning.
2017-01-09 09:13:19 +13:00
Piotr Esden-Tempski
606b73601c
Added TMS/SWDIO direction pin & adjusted SRST sense.
...
1) This version uses a direction control level shifters. We need to control
the direction of the TMS/SWDIO pin.
2.1) Because we want to support a large voltage range for SRST we use an
external dual MOSFET for asserting and sensing the SRST line. We have
added the hardware version 3 to be handled the same way as version 0.
Meaning using separate pins for assertion and sensing of the SRST line.
2.2) The new SRST sense circuit is inverting, thus we have dedicated
code for hardware version 3 that inverts the SRST status pin on read.
2017-01-06 18:31:55 -08:00
Param Aggarwal
51ac0fe319
Actual pin mappings and the comment differ!
...
I was stuck trying to debug the issue why my probe would not find any attached targets. This is because I was doing the pin mapping as per the comments, and not the actual code. There is a mismatch!
This PR updates the comment to reflect the values set in code. :)
2017-01-01 14:50:58 +05:30
Chuck McManis
085c980215
Remove EXTENDED_RESET define
2016-12-04 13:51:27 -08:00
Chuck McManis
a3c2592e44
Review feedback
2016-12-04 13:15:45 -08:00
Chuck McManis
469ecbf0f9
SAM4L: Add target driver for SAM4L
...
This commit adds a target driver for SAM4L and it depends on the
extended reset change.
2016-12-02 00:10:06 -08:00
Chuck McManis
0aef6c6774
SAM4L: Add extended reset to target interface
...
This adds a new function to the internal target interface
to allow the target to get control before reset is complete
so that it can do any additional work. On this target there
is a proprietary internal bit that has to be reset in some
cases to allow the core to continue operating.
2016-12-02 00:08:21 -08:00
Gareth McMullin
b745799156
Merge pull request #171 from gsmcmullin/v2_usb_uart_check
...
Don't enable usb uart on v2 when debugging
2016-11-22 13:20:24 +13:00
Gareth McMullin
7730d3b198
Don't enable usb uart on v2 when debugging
2016-11-22 12:45:59 +13:00
Gareth McMullin
15268ac663
EFM32HP (happy gecko) support
2016-11-16 08:23:40 +13:00
Angus Peart
4212d7a394
add STM32F303 targets
2016-11-03 13:44:13 -07:00
Gareth McMullin
e279844532
Merge pull request #167 from gsmcmullin/stm32l4_buffered
...
STM32L4: Use buffered flash model.
2016-10-31 12:06:00 -07:00
Gareth McMullin
bcf3caf20e
cortexa: Disable AHB memory access to avoid issues with L2 cache.
2016-10-26 18:27:35 -07:00
Gareth McMullin
3b7edc325d
Merge pull request #165 from gsmcmullin/gdb_tcp_buffering
...
libftdi: Disable Nagle algorithm and buffer sends internally.
2016-10-25 10:28:29 -07:00
Gareth McMullin
f40883f2b2
cortexa: Wait for instruction complete on resume, and timeout if no response.
2016-10-25 10:22:21 -07:00
Gareth McMullin
f947465fe4
libftdi: Disable Nagle algorithm and buffer sends internally.
...
This significantly improves performance by not waiting for TCP
timeout on transmission.
2016-10-25 10:07:04 -07:00
Gareth McMullin
917c107ded
Use `git-describe --always --dirty` when generating `version.h`
2016-10-22 14:45:32 -07:00
Gareth McMullin
7c83536c14
Don't break build if no tags in history
2016-10-22 13:19:00 -07:00
Gareth McMullin
7b575bd7c6
Fix Travis deployment.
2016-10-22 13:07:42 -07:00
Gareth McMullin
d48465c527
Merge pull request #163 from gsmcmullin/travis_publish
...
First attempt at publishing Travis builds to Amazon S3.
2016-10-22 12:06:46 -07:00
Gareth McMullin
cbc21114c1
First attempt at publishing Travis builds to Amazon S3.
2016-10-22 11:55:15 -07:00
Piotr Esden-Tempski
fdeb6471a8
Added missing #include guard.
2016-10-19 14:56:52 -07:00
Piotr Esden-Tempski
4348f0d135
Fixed double const.
...
The way the const pointer was written caused at least the clang compiler
to complain about double cosnst. I am not sure if the way it was written
before it resulted in the intended "make everything const" goal. But the
way it is written now it adheres to the right to left reading rule.
2016-10-19 14:37:03 -07:00
Piotr Esden-Tempski
2d37de773c
Fixed #include guard.
2016-10-19 14:36:27 -07:00
Piotr Esden-Tempski
8a009ca6ae
Corrected jtagtap_next signature.
...
The parameter is TDI (as in input) not TDO. The header signature and
comment are correct.
2016-10-19 13:53:04 -07:00
Roger Clark
3b74d91c69
Add support for nRF51822QFAAH1
2016-10-16 19:52:47 +11:00
Gareth McMullin
3abb4afdf6
Merge pull request #153 from gsmcmullin/restore_leds
...
Restore LED behaviour.
2016-10-05 10:37:36 -07:00
Gareth McMullin
2e9660910c
STM32L4: Use buffered flash model.
2016-09-30 12:09:37 -07:00
Gareth McMullin
517881f551
Merge pull request #154 from gsmcmullin/cortexa_breakpoints
...
cortexa: Fix hardware breakpoints.
2016-09-29 21:39:04 -07:00
Gareth McMullin
9a8cef04e0
Clean up debug format strings.
2016-09-29 21:31:18 -07:00
Gareth McMullin
966f360515
debug: Use semihosting if available or output via usbuart.
2016-09-29 21:31:13 -07:00
Gareth McMullin
ba8f77abf8
cortexa: Fix hardware breakpoints.
2016-09-28 22:18:24 -07:00
Gareth McMullin
40f960db4d
Restore LED behaviour.
2016-09-28 22:15:15 -07:00
Gareth McMullin
45e322b9a3
Handle usart errors.
2016-08-22 09:57:52 +12:00
Gareth McMullin
ca364a889e
Fix #145
...
Don't tc_printf in the probe.
tc_printf fixed to not crash of no controller connected.
2016-08-22 09:56:24 +12:00
Gareth McMullin
df7ad91692
Merge pull request #146 from joshgrob/nRF51/52_update
...
Adding new ConfigID value for nRF52832 QFAA B00
2016-08-10 07:33:28 +12:00
Gareth McMullin
779e0b5d15
Print sizes in memory map using 32-bit formatting for newlib-nano.
2016-08-08 13:42:03 +12:00
jgrob-an
fd4b8a02c0
Adding new ConfigID value for nRF52832 QFAA B00
2016-08-03 23:27:34 -04:00
Gareth McMullin
f131460168
Don't use zx format with printf. Doesn't work with newlib.
...
Fixes #144 .
2016-07-19 10:45:46 +12:00
Gareth McMullin
9a45d89b4a
target: Remove target_check_error from external interface.
2016-07-13 08:31:09 +12:00
Gareth McMullin
97f3fc6155
Reorder target.h
2016-07-13 08:31:09 +12:00
Gareth McMullin
9aacc18f60
target: Restructure internal break/watch handling.
...
cortexa: Implement soft breakpoints.
2016-07-13 08:31:09 +12:00
Gareth McMullin
9136cf4c98
target: target_halt_wait and target_check_hw_wp replaced with target_halt_poll.
...
The new function returns a stop reason which must be translated in gdb server.
In the case of a watchpoint hit, the address is returned by a pointer parameter.
Simplify the extenal interface for set/clear breaki-/watchpoints.
2016-07-13 08:31:09 +12:00
Gareth McMullin
ab06243e93
target: Use size_t instead of unsigned in syscall interface.
2016-07-13 08:31:09 +12:00
Gareth McMullin
26fab877da
target: Provide errno definitions and fallback for unimplemented syscalls.
2016-07-13 08:31:09 +12:00
Gareth McMullin
82cb6c8e83
target: Use target_addr for flash routines.
2016-07-13 08:31:09 +12:00
Gareth McMullin
aeaca988c3
target: Use new target_addr type consistently in external interface.
...
Flash routines still use uint32_t internally.
2016-07-13 08:31:09 +12:00
Gareth McMullin
f9bdaf06a4
Move flash stubs to target directory and update readme.
2016-07-13 08:31:09 +12:00
Gareth McMullin
b494279fe5
Move target files into separate directory.
2016-07-13 08:31:09 +12:00
Gareth McMullin
b644724520
Overhaul of semihosting. Remove dependence of target on gdb_packet.
2016-07-13 08:31:09 +12:00
Gareth McMullin
b03cc59bea
target: Add target controller structure for indirect calls back to host.
2016-07-13 08:31:09 +12:00
Gareth McMullin
5832d8a42a
Clean up common SWD stuff.
2016-07-13 08:31:09 +12:00
Gareth McMullin
9b8e2c3ad1
target: Replace all calls to gdb_out with new tc_printf.
2016-07-13 08:31:09 +12:00
Gareth McMullin
5c5f76d60e
target: Remove last accesses to private structure from outside.
...
Only include target_internal.h from inside target files.
2016-07-13 08:31:09 +12:00
Gareth McMullin
1cd03b3fa4
Allow breakpoint and watchpoint methods to be left NULL.
2016-07-13 08:31:09 +12:00
Gareth McMullin
07f27d1b70
Hide target list internals form command.c
...
Remove unused support for extended target structure size.
2016-07-13 08:31:09 +12:00
Gareth McMullin
72790893ae
target: move mmio routines out of public interface.
...
Fix crc routine to use buffered reads on stm32.
2016-07-13 08:31:09 +12:00
Gareth McMullin
e28e158721
Move *scan prototypes to target.h.
2016-07-13 08:31:09 +12:00
Gareth McMullin
4e04c1dded
Split out non-public target stuff into new header.
...
Wrap target methods with functions instead of macros.
2016-07-13 08:31:09 +12:00
Gareth McMullin
67bd1530b7
Remove some unused includes.
2016-07-13 08:31:09 +12:00
Gareth McMullin
3c44cce935
Make generic jtagtap function weak and stop including the c file.
2016-07-13 08:31:09 +12:00
Gareth McMullin
0fc61efe7c
Move STM32L[01] bit definitions to their driver and remove header.
2016-07-13 08:31:09 +12:00
Gareth McMullin
6b49fbe594
Quiet adiv5 probe.
2016-07-13 08:31:09 +12:00
Gareth McMullin
0480578391
stlink: New discovery boards support.
...
Patch from issue #103
2016-07-13 08:00:05 +12:00
Gareth McMullin
fec09464ac
Add STM32F302C8 ID.
...
From issue #100
2016-07-13 08:00:05 +12:00
Alexandre Bustico
c906a8614f
° add support for ITCM flash memory (in addition of DTCM) for STM32F7 family
...
° add support for STM32F76x and STM32F77x
2016-07-11 14:58:40 +02:00
Gareth McMullin
419aae4940
lpc15xx cleanup
2016-07-06 10:34:51 +12:00
David Lawrence
4addec0a21
lpc15xx support
2016-07-05 16:53:47 -04:00
Gareth McMullin
2a5efbc1ac
Merge pull request #140 from gsmcmullin/va_translation
...
cortexa: Virtual address translation and memory access through APB.
2016-06-30 18:23:31 +12:00
Gareth McMullin
4596d88f72
cortexa: Use fast mode for APB mem access and allow byte access.
2016-06-30 17:56:01 +12:00
Gareth McMullin
d16aca9ae0
cortexa: Fall back to APB memory access if no AHB available.
2016-06-29 11:11:27 +12:00
Gareth McMullin
ea9c2a2030
cortexa: Catch and report faults on address translation.
2016-06-29 11:11:27 +12:00
Gareth McMullin
9e2b0a86d7
cortexa: Perform VA translation on memory access.
2016-06-29 11:11:27 +12:00
Gareth McMullin
9c5ff37bf8
Add monitor command to force SRST
2016-06-28 14:35:43 +12:00
Gareth McMullin
60c67ee156
cortexa: Flush I-Cache on detach.
2016-06-28 14:35:43 +12:00
Gareth McMullin
6b3c3d3473
cortexa: Add timeout to reset spin.
2016-06-28 14:35:43 +12:00
Gareth McMullin
8b4342394f
Overhaul of timeouts so they may be nested.
2016-06-28 14:35:43 +12:00
Gareth McMullin
53c7fbd543
Fixes for verbose debug output.
2016-06-23 15:03:00 +12:00
Piotr Esden-Tempski
7b2309943a
Use Product ID and Componend ID tables instead of defines.
...
This patch adds tables that allow us to decode the Product ID and
Component ID registers. Based on those tables we can decide what probe
function to use. Also this makes it possible for us to understand what
ADIv5 components the target is offering to us, even if we do not
need/use them.
The tables include a comment describing how the register bits need to be
interpreted.
2016-06-22 18:34:04 -07:00
Piotr Esden-Tempski
20c994eece
Added black magic verbose/debug mode switch.
2016-06-22 17:28:26 -07:00
Gareth McMullin
90c0c28327
cortexa: Redirect read of PC through r0. MCR is unpredictable for r15.
2016-06-23 12:00:04 +12:00
David Brandt
2639bdbe23
Add NXP LPC82x support
2016-06-21 10:33:34 +02:00
Piotr Esden-Tempski
9be5cdb702
BMPM V2 target power control GPIO needs to be an open drain drive.
...
BMPM V2 uses a biasing resistor for the true switch mosfet circuit.
Because of that the weak pull-up/down of the stm32 is not asserting the
correct gate voltage for the mosfets to fully switch through. Because of
that we need to use open drain configulation of the GPIO instead.
2016-06-06 15:01:37 -07:00
Gareth McMullin
55cea5f90a
Merge pull request #132 from dlaw/kinetis
...
Add Kinetis KL27 support
2016-06-01 07:48:13 +12:00
Gareth McMullin
24d973e39f
adiv5: Probe ARMv6M devices with Cortex-M driver.
2016-05-30 08:48:54 +12:00
David Lawrence
25a46a83f9
Add Kinetis KL27 support
2016-05-18 12:06:54 -04:00
Gareth McMullin
bcf5b1eaa3
Merge pull request #126 from gsmcmullin/cortexa
...
Cortex-A support
2016-04-28 10:56:43 +12:00
Gareth McMullin
13602c5d85
cortexa: Also assert SRST to reset.
2016-04-20 12:55:12 -07:00
Gareth McMullin
08c9ab54d7
adiv5: Try abort sequence if DP is stalling during scan.
2016-04-20 12:55:12 -07:00
Gareth McMullin
bed6627579
adiv5: Implement access to DP ABORT register.
2016-04-20 11:36:42 -07:00
Gareth McMullin
68bf825042
cortexa: Disable interrupts while single stepping.
2016-04-20 11:35:58 -07:00
Gareth McMullin
88bf92ac36
cortexa: Fix write back of PC and CPSR.
2016-04-20 11:35:25 -07:00
Gareth McMullin
d94f7e0c75
Remove old arm7tdmi header.
2016-04-19 22:23:19 -07:00
Gareth McMullin
0ab878dcd2
cortexa: Add short delay after reset, before reattaching.
...
Allows the early bootloader to configure the DDR ram.
2016-04-19 13:29:22 -07:00
Gareth McMullin
a2ec877b73
cortexa: Restore cache clean and invalidate on memory writes.
...
Include a small optimisation of APB access to speed up the process.
2016-04-19 13:24:05 -07:00
Gareth McMullin
49f89cfc95
cortexa: Fix detach.
...
Also pulls out internal register cache functions from halt/resume.
2016-04-19 13:24:05 -07:00
Gareth McMullin
f6b574e0b0
Cortex-A target support.
2016-04-19 13:24:05 -07:00
Gareth McMullin
60f3be501e
Pass breakpoint length to target.
2016-04-19 13:24:05 -07:00
Gareth McMullin
459bae4ea1
ADIv5 structural changes.
...
- Probe ROM table
- Mem-AP no longer pretends to be a target
- AP no longer provides priv pointer
2016-04-19 13:24:05 -07:00
Gareth McMullin
8d9d6f692c
Fix platform_delay
2016-04-19 13:23:04 -07:00
Gareth McMullin
cd1d72257f
Cleanup of SRST handling.
...
- Remove connect_assert_srst global.
- Attach functions always release reset.
- Platforms provide a method to poll the reset pin.
- Reset on scan is all internal to command.c
- Reset is released on a failed scan. Fixes #111
2016-04-19 13:12:16 -07:00
Gareth McMullin
e010cd763d
Merge pull request #125 from bvernoux/master
...
Cleanup and Fix code for HydraBus
2016-04-18 13:01:00 -07:00
Gareth McMullin
294d93cfe3
Fix build warnings.
2016-04-18 12:25:48 -07:00
bvernoux
2e3778e772
Cleanup and Fix code for HydraBus
2016-04-18 00:48:06 +02:00
Gareth McMullin
2685906fc8
Merge pull request #124 from gsmcmullin/windows_fixes
...
Fixes to allow building for Windows.
2016-04-16 14:49:22 -07:00
Gareth McMullin
799ccf99f5
Merge pull request #123 from gsmcmullin/digilent_cable
...
Add Digilent JTAG-HS3 FTDI cable.
2016-04-15 13:06:30 -07:00
Gareth McMullin
966b21c3e1
Merge pull request #121 from esden/bmpm2_support
...
Bmpm2 support
2016-04-15 13:01:34 -07:00
Gareth McMullin
9141418bd4
Merge pull request #80 from gsmcmullin/hydrabus
...
Add HydraBus support
2016-04-15 13:00:52 -07:00
Gareth McMullin
987a926a19
Fixes to allow building for Windows.
2016-04-15 12:58:36 -07:00
Gareth McMullin
4e8b40ad5d
Add Digilent JTAG-HS3 FDTI cable.
2016-04-15 12:05:43 -07:00
Piotr Esden-Tempski
8e8a53ef12
Added support for Black Magic Probe Mini V2.0e.
...
All BMPM2 prototypes after revision a have their LED0 and LED2 inverted.
Because of that we have bumped the hardware revision to swap the LEDs in
software. This is easier than messing up the routing of the LEDs.
2016-04-06 19:23:17 -07:00
Piotr Esden-Tempski
f2650df731
Fixed a hardware version detection glitch.
...
If you try to read out the GPIO immediately after setting the weak pull
on the pin it is possible that you will not read the correct value on a
floating pin. We need to use a busy wait loop instead of the
platform_delay because the platform timing is not initialized yet. We
also can not initialize the platform_delay code yet because it requires
LED gpio to be configured. A busy wait seems to do the job and is easier
than refactoring the codebase to use the platform_delay function.
2016-04-06 19:20:43 -07:00
Karoly Molnar
33414c3a9b
added support for KL02 family
2016-03-15 17:31:24 +01:00
Gareth McMullin
cc244eb2d8
Merge pull request #108 from lbonn/upstream-patches
...
Some various fixes
2016-03-09 10:27:34 +13:00
Gareth McMullin
c0f92ea5a7
Merge pull request #116 from esden/flashier_dfu
...
[native] Make the native bootloader bit more flashy.
2016-03-09 10:26:56 +13:00
Gareth McMullin
4e23c95c53
Merge pull request #115 from esden/bmpm2
...
[native] Check for hardware version by pull-up and -down. Print HW Ve…
2016-03-09 10:26:43 +13:00
Michał Derkacz
fbc344c1cd
nrf51: Another undocumented version.
2016-02-25 17:43:14 +01:00
Piotr Esden-Tempski
c0c8bade6f
[native] Make the native bootloader bit more flashy.
...
This change has also a practical reason. When flashing and testing the
hardware this change makes it easier to make sure all the LEDs work. Now
when the DFU bootloader is idle it is scanning the LEDs making it easy
to see if one of them has an issue.
In addition to that, the bootloader now indicates when there is data
being flashed using the DFU interface. In cases when one has more than
one device connected and accidently starts flashing a wrong device this
is very useful feature to have.
2016-02-14 23:47:57 -08:00
Piotr Esden-Tempski
b7e5005679
[native] Check for hardware version by pull-up and -down. Print HW Version in mon command.
...
Until now the native hardware was pulling PB5-7 down and checking if
they were asserted high. BMPMV2b is pulling the pins down instead of
high. The hardware version routine now determines the hardware version
based on the fact if a pin is asserted at all. This means that if a pin
is left floating, the version number bit will be 0, and if the pin is
asserted either high or low the bit will be set to 1. While we were
already at it the "monitor version" command in GDB will now also print
the hardware version number.
2016-02-14 22:49:29 -08:00
Mark Rages
9c846d5029
Add nRF52 support.
2016-02-10 20:23:43 -07:00
Gareth McMullin
d5e263122f
Increase JTAG_MAX_DEVS to 32.
...
Fixes #112
2016-02-02 10:04:57 +13:00
Mark Rages
7d957cbfdf
Update nRF51 IDs, add nRF51422 and xxAB/xxAC devices.
...
There were a lot of nRF51 device ids missing. I wrote a script to pull nRF51 IDs from the openocd repository, which seems to be more up-to-date. The script's output goes in nrf51.c.
2015-12-17 17:50:41 -07:00
Laurent Bonnans
c9d3cf71dd
gdb_main.c: fix buffer overflow on large reads
...
When gdb issues a `m xx,200` command, the probe should respond with a
packet of size 2*0x200=1024 which is the size of the packet buffer.
However, the `hexify()` procedures writes 1025 bytes in the buffer.
During my tests, it caused the probe to hang when issuing a `dump`
command. Presumably by overwritting the `cur_target` variable.
2015-12-14 11:28:28 +01:00
Laurent Bonnans
2d7b24c566
efm32: inhibit srst
...
EFM32s don't seem to like to be completely resetted while being debugged
(load and break were broken)
2015-12-14 11:28:28 +01:00
Clement Burin des Roziers
1f62fa4909
CRC32: improved computation time
...
Reading one byte at a time was so slow that it caused the gdb client to
timeout.
2015-12-14 11:28:28 +01:00
Gareth McMullin
61c6c767b0
Merge pull request #107 from richardeoin/efm32
...
[efm32] Use SW-DP IDCODE register for identification
2015-12-13 14:59:49 +13:00
Richard Meadows
544e1080a3
[efm32] Use SW-DP IDCODE register for identification
...
Instead of the Device ID register which isn't constant for EFM32 parts
2015-12-01 21:41:08 +00:00
Gareth McMullin
e6d388d057
Merge pull request #106 from richardeoin/efm32
...
Support for Silicon Labs EFM32/EZR32
2015-11-17 07:59:35 -08:00
Richard Meadows
fa7cccff23
[efm32] Formatting fixes
2015-11-14 14:56:03 +00:00
Richard Meadows
b678b83062
[efm32] oops, fixed ezr32lg probe message
2015-11-14 14:42:09 +00:00
Richard Meadows
fe3874bc82
[efm32] add extra details to probe message
2015-11-14 14:41:48 +00:00
Gareth McMullin
091adda0b4
Merge branch 'umetronics-master'
2015-11-11 12:41:57 -08:00
Gareth McMullin
600f0d27d9
Use sniprintf on newlib platforms.
2015-11-11 12:41:13 -08:00
Gareth McMullin
56b10a1255
Merge branch 'f205' of https://github.com/schodet/blackmagic into schodet-f205
...
Conflicts:
src/stm32f4.c
2015-11-11 12:27:27 -08:00
Richard Meadows
07f7571dd1
Add basic support for EFM32/EZR32 chips
...
Tested with EZR32LG230
2015-10-23 19:58:44 +01:00
Antti Nykänen
3f9ea8250a
Defined snprintf to sniprintf on launchpad-icdi
2015-10-22 19:33:45 +03:00
Antti Nykänen
2365bbe010
TI TM4C/LM4F cdc-acm fixes
2015-09-30 15:48:01 +03:00
Gareth McMullin
7e5a664df9
Merge pull request #98 from UweBonnes/stm32l4
...
Add STM32L4 handling. No option write handling yet.
2015-09-01 11:01:36 +12:00
Gareth McMullin
6ec35bc9ff
Merge pull request #97 from UweBonnes/stm32f7
...
Stm32f7
2015-09-01 10:58:57 +12:00
Gareth McMullin
3aa333ee1c
Merge pull request #95 from bvanheu/feature/nrf51_new_idcode
...
Add 0x0072 as a valid & supported idcode for NRF51
2015-09-01 10:30:55 +12:00
Uwe Bonnes
f7492d93be
Cortex-M: Detect and handle flash patch revision.
...
According to ARM v7-M Architecture Reference Manual
ARM DDI 0403E.b (ID120114)
2015-08-22 13:01:24 +02:00
Uwe Bonnes
51e2adc6d9
Add STM32F7.
2015-08-22 13:01:24 +02:00
Uwe Bonnes
2336a313e4
Add STM32L4 handling. No option write handling yet.
2015-08-22 12:59:56 +02:00
Nicolas Schodet
97cb75145d
Add support for STM32F2xx family
...
The F405 rev A uses a wrong CPUID, this patch use the core identifier to make
the distinction.
Tested with:
- F205
- F405 rev Z
- F429
Unfortunately, I do not have any F405 rev A.
2015-08-17 14:35:11 +02:00
Gareth McMullin
ef574b72b1
Add support for STM32F446x family.
...
Tested with a custom hardware.
2015-07-31 09:05:27 -07:00
Benjamin Vanheuverzwijn
420d2c41c7
Add 0x0072 as a valid & supported idcode for NRF51
2015-07-31 00:00:00 -04:00
Richard Meadows
beacf9c85c
Refactor stm32f1_probe
2015-07-30 07:58:55 +01:00
Richard Meadows
101821ae31
[Bugfix] stm32f1_probe would always return true, breaking support for all other targets
...
The intention of `if (t->driver)` conditional was to test if any of the cases in the preceeding switch/case were met. However t->driver was previously set to point to a default value in cortexm.c:200 and therefore this would always evaluate to true. I've replaced the broken if statement with a duplicate of the switch/case run above.
It looks like this was introduced in 09544bc710
(PR #92 ) but 492d6c9cf8
maybe contributes to the confusion in this instance.
2015-07-12 17:32:48 +01:00
Nicolas Schodet
b60f5283ae
Fix usage of USB_VBUS
...
USB_VBUS is not an alternate function, it is an additionnal function which is
always enabled.
If configured as an alternate function, it will draw current from VBUS.
2015-06-23 11:51:56 +02:00
Uwe Bonnes
a7f6753153
STM32f0: F07 and F09 have 2kiByte blocksize.
2015-06-22 16:44:19 +02:00
Uwe Bonnes
09544bc710
src/stm32f1.c: More verbose FO detection message.
2015-06-22 16:44:08 +02:00
Gareth McMullin
4af5c03d75
lmi: Use registers for stub parameters.
2015-04-21 20:05:41 +12:00
Gareth McMullin
ca17de6243
lpc11xx: Correctly detect LPC8xx devices.
2015-04-11 17:23:01 -07:00
Gareth McMullin
9009ed6581
cortexm: Add target option to inhibit assersion of SRST.
2015-04-11 16:08:59 -07:00
Gareth McMullin
24122aa318
lpc43xx: add chipid for LPC43S37.
2015-04-11 16:08:25 -07:00
Gareth McMullin
09b781f1c1
target: Remove old flash interface.
2015-04-11 16:05:41 -07:00
Gareth McMullin
3d8b34f180
lpc: split out common code and rewrite to use new interface.
2015-04-11 16:05:40 -07:00
Gareth McMullin
cd5d569d38
lpc: Reduce differences between lpc11xx and lpc43xx code.
2015-04-11 16:05:40 -07:00
Gareth McMullin
54eb3a719f
samd: use new flash interface.
2015-04-11 16:05:40 -07:00
Gareth McMullin
d340053078
nrf51: use new flash interface.
2015-04-11 16:05:40 -07:00
Gareth McMullin
1541f1c7a8
kinetis: use new flash interface.
2015-04-11 16:05:40 -07:00
Gareth McMullin
9e09ae2e1e
lmi: use new flash interface.
2015-04-11 16:05:40 -07:00
Gareth McMullin
622497f7e2
stm32f1: use new flash interface.
2015-04-11 16:05:40 -07:00
Gareth McMullin
7cd3432994
stm32f4: Add second bank for F42x/F43x.
2015-04-11 16:05:40 -07:00
Gareth McMullin
1efad1a03a
stm32f4: use new flash interface.
2015-04-11 16:05:40 -07:00
Gareth McMullin
fc2f266a13
sam3x: Update to use new buffered flash interface.
2015-04-11 16:05:40 -07:00
Gareth McMullin
21c209fd8f
sam3x: simplify probe function.
2015-04-11 16:05:40 -07:00
Gareth McMullin
3ed4207e8a
stm32l0: Update to use new buffered flash writes. Remove old stubs.
2015-04-11 16:05:40 -07:00
Gareth McMullin
45328ea124
Add buffering support for flash drivers.
...
Some devices can get a significant boost in performance by writing to
flash memories one page at a time. Generic function to do this are
provided at the target layer and may be used by flash drivers.
2015-04-11 16:05:40 -07:00
Gareth McMullin
36f749fed9
Fix flash buffer alignment in target layer.
2015-04-03 21:21:30 -07:00
Gareth McMullin
7202db5860
Add new functions to wrap flash driver erase/write/done operations.
2015-04-03 21:20:01 -07:00
Gareth McMullin
691d21989a
Add function to add simple flash driver to target.
...
Clean up ram/flash/memory map on target destruction.
2015-04-03 21:18:16 -07:00
Gareth McMullin
0fc635b3f8
Add functions for dynamically generating the XML memory map.
2015-04-03 21:18:16 -07:00
Gareth McMullin
482070c91b
Merge branch 'v1.6-branch'
...
Conflicts:
src/Makefile
src/platforms/stlink/platform.h
src/platforms/swlink/platform.h
2015-04-03 21:02:01 -07:00
Gareth McMullin
97824b7f02
Use git describe for version in generated header file.
2015-04-03 20:21:33 -07:00
Gareth McMullin
865beaba98
Suppress warning about longjmp clobbering local variable.
2015-04-02 21:06:18 -07:00
Florian Larysch
bc89217e3f
sam3x: add SAM3U support
2015-04-01 00:04:52 +02:00
Gareth McMullin
21d464293c
gdb: don't access target fields directly.
2015-03-29 18:06:13 -07:00
Gareth McMullin
c2cde32716
Improve cortexm_read/write_regs. Use more sensible return types.
2015-03-29 17:37:03 -07:00
Gareth McMullin
274b818517
Make cortexm_pc_write static.
2015-03-29 16:48:51 -07:00
Gareth McMullin
779dcf0f69
stm32l0: use cortexm_run_stub.
2015-03-29 16:47:55 -07:00
Gareth McMullin
012922ed00
nrf51: use cortexm_run_stub.
2015-03-29 16:31:38 -07:00
Gareth McMullin
810269dce1
nrf51: Use generated stub.
2015-03-29 16:28:18 -07:00
Gareth McMullin
cac286d398
lmi: Use generated stub with cortexm_run_stub.
2015-03-29 16:20:57 -07:00
Gareth McMullin
2215e33bcf
lmi: Clean up magic numbers, remove adiv5 links, and doc ref.
2015-03-29 15:58:18 -07:00
Gareth McMullin
31fae032f7
cortexm: Separate stub loading from running.
2015-03-29 15:20:00 -07:00
Gareth McMullin
9f271d5cd7
Consistently use 'target *t' for target var.
2015-03-28 20:47:17 -07:00
Gareth McMullin
1e54139f4a
target: Remove pc_read/pc_write methods.
2015-03-28 20:15:33 -07:00
Gareth McMullin
4313b64bbe
Add a flash_done target method.
2015-03-26 20:47:57 -07:00
Gareth McMullin
f74def3552
Remove old STM32L1 driver.
2015-03-26 20:47:57 -07:00
Gareth McMullin
d9af3cca6c
Remove unfinished ARM7TDMI driver.
2015-03-26 20:47:57 -07:00
Gareth McMullin
64c79e1d03
Consistently name target var 't' in cortexm.
2015-03-26 20:47:57 -07:00
Gareth McMullin
bda4279028
Send error reply and abandon target list on unhandled timeout.
2015-03-26 20:42:47 -07:00
Gareth McMullin
68f54a3545
Remove old platform specific error handling macros.
2015-03-22 14:06:56 -07:00
Gareth McMullin
5ab8564ff6
Clean up handling of lost targets using new exceptions mechanism.
2015-03-22 14:05:12 -07:00
Gareth McMullin
588bad34ba
Build with -Os for swlink.
2015-03-22 12:26:45 -07:00
Gareth McMullin
9a8dbdeff7
Fix errors when building for non-native platforms.
2015-03-22 12:26:45 -07:00
Gareth McMullin
83b83ca48f
Use controlled timeout on SW/JTAG DP transactions.
2015-03-22 12:26:45 -07:00
Gareth McMullin
d0a03f55a6
Handle timeout exceptions during scans and report to the user.
2015-03-22 12:26:45 -07:00
Gareth McMullin
d6225eec76
Raise timeout exception when target is in WFI.
...
Ignore the exception when polling for halt, and report the exception
to the user if halting the target fails.
Remove old allow_timeout flag in DP struct that's no longer needed.
2015-03-22 12:26:45 -07:00
Gareth McMullin
fa046601a5
Add exception handling mechanism and raise exception on low-level comms failure.
2015-03-22 12:26:45 -07:00
Gareth McMullin
a497127a8d
Move MIN macro to general.h
2015-03-22 12:23:03 -07:00
Gareth McMullin
acfd258aa7
Rewrite STM32F4 stub in C and use new interface.
2015-03-19 21:49:09 -07:00
Gareth McMullin
8ddb186b35
Allow stub to return an error code.
2015-03-19 21:49:09 -07:00
Gareth McMullin
437aedda11
Rewrote stm32f1 stub in C and call with parameters in registers.
2015-03-19 07:48:57 -07:00
Gareth McMullin
c2462a6788
Add cortexm generic stub call, and use in stm32f1 driver.
2015-03-19 07:48:47 -07:00
Gareth McMullin
e380ced517
Change STM32F1 driver to use generated stub.
2015-03-19 07:43:36 -07:00
Gareth McMullin
1de685198c
Flatten samd_probe.
2015-03-17 21:58:36 -07:00
Gareth McMullin
5c337c9aa7
Whitespace.
2015-03-17 21:58:36 -07:00
Richard Meadows
1366c32f89
samd: Simplified samd_flash_write further by always using manual writes.
...
Tested on all three devices as listed at the top of samd.c
2015-03-17 21:58:36 -07:00
Gareth McMullin
0bf7778759
samd: Remove low level ADIv5 calls an favour of target_mem_write.
2015-03-17 21:58:36 -07:00
Gareth McMullin
018d9cce80
Check vasprintf return value.
2015-03-17 21:19:02 -07:00
Gareth McMullin
f5f87bf70f
Build for stlink with -Os.
2015-03-15 20:39:19 -07:00
Gareth McMullin
c3f798438a
Remove abstraction of adiv5_dp_write. Both implementations were identical.
2015-03-15 17:12:31 -07:00
Gareth McMullin
2bf54f9a72
Replace adiv5_ap_mem* functions with inline wrappers to target mem*.
2015-03-15 16:02:09 -07:00
Gareth McMullin
ee3af96a73
Consolidate target_mem_read* and target_mem_write* methods.
...
There are now only mem_read and mem_write, that must
handle all alignments. These methods return void, errors must be
checked with target_check_error.
2015-03-15 14:31:57 -07:00
Gareth McMullin
2e785e56fa
adiv5: Encode APnDP into register definition.
...
Clean up magic numbers in adiv5 calls.
Removed old adiv5_dp_write_ap and adiv5_dp_read_ap.
2015-03-14 18:03:04 -07:00
Gareth McMullin
6f5b1873d7
Use size_t for sizes in flash functions. Fix all sign compare warnings.
2015-03-14 15:18:22 -07:00
Gareth McMullin
f5c856af3b
Fix pointer sign warnings and remove -Wno-pointer-sign.
2015-03-13 20:35:39 -07:00
Gareth McMullin
f52a51403f
stm32l0: cleanup includes.
2015-03-11 20:47:51 -07:00
Gareth McMullin
1196b03d66
stm32l0: Fix pointer/integer casting warnings.
2015-03-11 20:47:51 -07:00
Gareth McMullin
3d28c1418c
Cleaned up printf/scanf for C99 integer types.
2015-03-11 20:47:42 -07:00
Gareth McMullin
4baa8aba4f
cdcacm: Fix DCD for second ACM interface.
2015-03-11 20:13:38 -07:00
Gareth McMullin
7c1c19881f
Reassert DCD after DTR is written. Fixes #41 .
2015-03-11 05:45:43 -07:00
Marc Singer
bf1cb71eb7
Revisions on Gareth's comments.
...
o Implemented byte writes to EEPROM now that the emulator has a
byte-wide target write.
o Added comment describing the reason that mass erase doesn't work.
o Removed all unused code.
o Changed to Linux kernel indent style.
o Changed to Linux kernel function to parenthesis style.
o Stub generation doesn't use Perl, switched to sed. Also, only
including the instructions instead of the source and the instructions.
o Handling unaligned destination writes.
2015-03-08 16:25:22 -07:00
Marc Singer
e0a8ce5a88
STM32L0x target support.
...
Target support for stm32l0's and stm32l1's including option bytes and
data EEPROM. This module will superceed the previous stm32l1 driver.
o Program flash write and erase.
o Options modification and interpretive status.
o Stubs for program flash writes and erases. Stubs are modestly
faster than non-stub version. The stm32l0 will not execute stubs
when the MCU has crashed. A monitor option may be used to force
non-stub flash writes.
o Stubs generated from C++ code and converted to arrays of half-words.
o Writes to data EEPROM supoprted when loading segments.
o EEPROM data monitor command to write words.
o Stubs supported on stm32l1.
2015-03-08 16:17:34 -07:00
Gareth McMullin
0d99e22a26
Quieten build system.
2015-03-07 11:03:50 -08:00
Gareth McMullin
1eac78b1c8
Move targets to make bin and hex files to toplevel makefile.
2015-03-07 11:03:50 -08:00
David Lawrence
c8f469c868
SAM4S: Erase flash in 8K instead of 16K chunks.
2015-03-05 10:46:22 -05:00
Gareth McMullin
49390fee2a
Fix Windows DFU instructions in the Hydrabus readme.
2015-03-04 20:22:19 -08:00
Benjamin Vernoux
9f0c29d329
Add support for HydraBus (tested with SWD with STM32F405 and SWD+JTAG with LPC4330 M0/M4)
2015-03-04 20:22:00 -08:00
Gareth McMullin
c731c6ece3
Make F4 conditionals check STM32F4, not F4DISCOVERY.
2015-03-03 21:39:29 -08:00
Gareth McMullin
2e37db2270
Error on any failure on 'make all_platforms'
2015-03-02 23:14:43 -08:00
Gareth McMullin
87b8f330f0
Add a makefile target to build all platforms.
2015-03-02 22:20:25 -08:00
Gareth McMullin
3e466f2d23
Factor out timing routines common to all STM32 targets.
2015-03-02 21:59:04 -08:00
Gareth McMullin
b07ffffcee
Factor out common cdcacm.c from stm32 and tm4c.
...
Cleaned up interface to enter bootloader and read serial number.
2015-03-02 10:16:33 -08:00
Gareth McMullin
4d4813de87
Clean up includes everywhere.
...
All source files include general.h first and before anything else.
This inlcludes platform.h and platform_support.h
No header file needs to include to include any of these, but should include
any others needed for it's own declarations.
2015-03-01 22:16:04 -08:00
Gareth McMullin
9d80641261
Move common platform include to a common directory.
2015-03-01 20:15:31 -08:00
Gareth McMullin
476f83b69a
Move common USB stuff out of platform header files.
2015-02-28 22:48:26 -08:00
Gareth McMullin
5eff0ab5d6
Factor out common GPIO code in STM32 platforms.
2015-02-28 22:09:50 -08:00
Gareth McMullin
48fb7ec662
Add missing includes to fix warnings.
2015-02-28 22:06:10 -08:00
Gareth McMullin
75001a4421
Factor Morse code functions out of platform code.
2015-02-28 22:05:10 -08:00
Gareth McMullin
5d136398e1
Use sensible return convention for platform_target_get_power()
2015-02-28 21:23:24 -08:00
Gareth McMullin
1b2cd547bc
Merge pull request #72 from dlaw/master
...
Add support for SAM4 erase command
2015-01-26 10:59:32 +13:00
Gareth McMullin
1552218e8f
Merge pull request #71 from maknoll/master
...
SAM3S support
2015-01-26 10:56:52 +13:00
David Lawrence
b771d0dcd6
Add support for SAM4 erase command
2015-01-23 16:36:12 -05:00
Martin Knoll
a7283196d1
SAM3S support
2015-01-22 16:09:01 +01:00
Richard Meadows
ea78e2d737
Complete refactor of samd20 -> samd
2015-01-18 22:40:02 +00:00
Richard Meadows
565795e168
Added support for SAMD10/11/21, and list of tested SAM D devices
...
This allows blackmagic to be used with the new Arduino Zero board via
the unpopulated SWD header on the east end of the board.
2015-01-18 22:35:59 +00:00
Richard Meadows
3726061773
Support for the NVMCTRL Security Bit (PROT=1)
2015-01-18 20:46:26 +00:00
Richard Meadows
e75ea64a01
Renamed nvmc control a register to match datasheet
2015-01-18 14:11:58 +00:00
Richard Meadows
1c1312b467
Added better feedback for samd erase failures
2015-01-18 13:22:41 +00:00
Gareth McMullin
a3ab9b24d1
Avoid repetition of cortexm code in stmd20 driver.
2015-01-18 12:16:17 +13:00
Gareth McMullin
f1981925b3
Merge branch 'samd20-revb-fix' of https://github.com/richardeoin/blackmagic into richardeoin-samd20-revb-fix
2015-01-18 11:03:10 +13:00
Richard Meadows
cad30cfa39
Fixed run command on SAM D20 old revision B silicon.
...
This appears to be related to Atmel Errata Reference 12015 (see §
35.4.1 DSU in the datasheet) but only applies to revision B silicon -
not revision C. While this is an old silicion revision (latest is
revision E as of 17 Jan 2015) I found one on a development board.
2015-01-17 18:58:00 +00:00
Richard Meadows
9072faf6ca
Fixed spaces / tabs from last commit
2015-01-17 18:35:36 +00:00
Richard Meadows
c12002b636
Check target_attach succeeded in vRun command, and return error if not
2015-01-17 18:30:58 +00:00
Gareth McMullin
abcc04d4f3
Merge pull request #63 from beewoolie/static-stubs
...
Fix to move stubs into rodata.
2015-01-17 13:18:20 +13:00
David Lawrence
985627af7e
SAM4S support
2015-01-12 14:53:58 -05:00
Marc Singer
da28970c3e
Fix to move stubs into rodata.
...
o Stubs were declared as globals which means they will be initialized
data. No need for this. Now, stubs are static const and are only
present in the program image.
2015-01-09 18:18:10 -08:00
Gareth McMullin
9c5ffd61f7
First cut at Freescale Kinetis support.
2015-01-06 22:26:00 +13:00
Uwe Bonnes
d162e75ceb
stm32f4.c: Add STM32F411 ID.
2014-12-23 21:32:21 +13:00
Gareth McMullin
fdd7799304
Merge pull request #60 from themadinventor/lp-icdi-clean
...
Added (preliminary) support for TI TM4C123 Launchpad
2014-12-23 21:31:43 +13:00
Fredrik Ahlberg
346258934b
Added support for TI TM4C123 Launchpad
2014-11-23 22:59:16 +01:00
Vegard Storheil Eriksen
9434299613
Add support for halfword memory accesses.
2014-10-21 00:12:50 +02:00
Gareth McMullin
fd9eef821e
Revert USB double buffered OUT handling on STM32F1.
...
This introduced a bug where the endpoint can get stuck, forever sending NAK.
2014-10-16 13:50:56 -07:00
Gareth McMullin
f85a8c4ebb
Fix build for f4discovery by defining platform_hwversion().
2014-10-16 13:50:56 -07:00
Gareth McMullin
a5549d630c
Whitespace cleanup.
2014-10-16 13:50:56 -07:00
Gareth McMullin
60626e5bbe
Merge pull request #57 from aibara/dev/lpc43xx_wdt
...
LPC43XX: Attempt to handle case of running WDT.
2014-09-17 10:14:21 +12:00
Allen Ibara
c5abc9a0bd
LPC43XX: Attempt to handle case of running WDT.
...
If the WDT is running, it may reset while we are trying to flash.
Since we can't disable it, we set a long period and attempt to pet it
before each IAP call.
2014-09-16 14:54:24 -07:00
Gareth McMullin
9fda010b32
Give up unwinding a fault if reading the stack fails.
2014-09-12 12:24:43 +12:00
Richard Eoin Meadows
091389b982
SAMD20 prints die revision
2014-09-03 21:17:48 +12:00
Richard Eoin Meadows
f4e20d0d04
Ooops - Semicolon from last commit :-)
2014-09-03 21:17:48 +12:00
Richard Eoin Meadows
f4474557d0
SAM D20 MBIST shouldn't fail silently
2014-09-03 21:17:48 +12:00
Richard Eoin Meadows
39a0b064af
Use external access DSU range
2014-09-03 21:17:48 +12:00
Richard Eoin Meadows
2a444ab1fb
Fixed SAM D20 support with reset attached.
...
monitor connect_srst enable can be used to connect to targets that re-use the SWCLK pin
2014-09-03 21:17:48 +12:00
Richard Eoin Meadows
e75798f201
Optimised flash write, programming speed is now approx. 2x faster
2014-09-03 21:17:48 +12:00
Richard Eoin Meadows
02812b6bf1
Added notes about the datasheet and NVMCTRL Security Bit
2014-09-03 21:17:41 +12:00
Richard Eoin Meadows
945a2802d5
Atmel SAMD20 support
2014-09-03 21:17:41 +12:00
Gareth McMullin
9d9ecb572e
Assert SRST when scanning JTAG if configured. Closes #54 .
2014-08-27 19:03:37 +12:00
Gareth McMullin
8a32b46f65
Fix build for non-native targets.
2014-08-08 20:22:33 +12:00
Gareth McMullin
84fc40085e
Send a null packet on end of USB transfer if last data packet is full.
2014-08-06 12:38:57 +12:00
Hans Baier
d265b76001
Add support for STM32F401RE
2014-08-06 10:49:48 +12:00
Gareth McMullin
d7c30caa3e
Style clean up.
2014-07-30 21:15:43 +12:00
Gareth McMullin
f06bc0fd79
Minor fixes to stm32f1 flash routines.
2014-07-30 20:27:30 +12:00
Gareth McMullin
fad6eb3c14
Fix parity support on USB UART interface.
2014-07-30 19:57:18 +12:00
Gareth McMullin
2b61bed291
Merge branch 'nrf51-uicr' of https://github.com/richardeoin/blackmagic into richardeoin-nrf51-uicr
...
Conflicts:
src/nrf51.c
2014-07-30 16:55:02 +12:00
Gareth McMullin
4447fb428a
Merge pull request #50 from richardeoin/nrf51-ficr
...
Added monitor commands for reading various nRF51 device parameters
2014-07-30 16:51:46 +12:00
Gareth McMullin
936b7460e0
Merge branch 'John-Titor-lpc11xx-flash'
2014-07-30 16:48:56 +12:00
Gareth McMullin
3daf5d7e11
Merge branch 'lpc11xx-flash' of https://github.com/John-Titor/blackmagic into John-Titor-lpc11xx-flash
...
Conflicts:
src/lpc11xx.c
2014-07-30 16:45:55 +12:00
Gareth McMullin
bfe5d1168b
Merge pull request #47 from richardeoin/target-power
...
Added monitor option to toggle target power
2014-07-30 14:19:46 +12:00
Gareth McMullin
7e396b0205
Merge pull request #30 from BuFran/pulls/l152c
...
[SUP] Add support for stm32l152c-discovery board
2014-07-30 14:17:51 +12:00
Gareth McMullin
5d61575ce6
Merge remote-tracking branch 'origin/lpc8xx'
...
Conflicts:
src/lpc11xx.c
2014-07-30 14:11:10 +12:00
Frantisek Burian
88a80e25d5
[SUP] Add support for stm32l152c-discovery board
2014-07-09 16:35:33 +02:00
Richard Eoin Meadows
7dc18768c4
Support erasing + flashing the User Information Configuration Registers (UICRs)
2014-06-11 13:43:59 +01:00
Richard Eoin Meadows
380f128d0a
Added monitor commands for reading various nRF51 device parameters
2014-06-11 13:39:06 +01:00
none
3543e560af
Fix lpc11xx magic number programming when chunks overlap
...
In the case where the vectors are in a separate section smaller than
the chunksize, the lpc11xx magic number calculation could generate an
incorrect value.
2014-06-10 21:23:17 -07:00
Richard Eoin Meadows
c1b1d45155
TRST only exists on hardware version 0
2014-05-28 12:45:21 +01:00
Richard Eoin Meadows
42e41edfa1
Target power option is only for versions > 0
2014-05-28 12:33:43 +01:00
Richard Eoin Meadows
c9089f5851
Added monitor option to toggle target power
2014-05-28 12:25:48 +01:00
Richard Eoin Meadows
63bce97cbd
PLATFORM_FATAL_ERRORs are now caught even when they happen in the
...
initial JTAG scan that occours during platform_init.
Previously any fatal errors that occoured during this scan caused a
hardfault.
2014-05-28 12:10:26 +01:00
Gareth McMullin
72ae78a185
Updated libopencm3. Fixes broken bootloader, issue #43 .
2014-05-08 11:02:35 -07:00
Mike
34d0f64529
Nordic nRF51 series support
2014-05-01 15:09:59 +01:00