The wksFile.Read() call returns a size_t which is then compared
with a int. Make the filelen variable a size_t to make sure it is
of the correct width.
Fixes the following warning:
kicad/common/page_layout/page_layout_reader.cpp: In member function ‘void WS_DATA_MODEL::SetPageLayout(const wxString&, bool)’:
kicad/common/page_layout/page_layout_reader.cpp:853:41: warning: comparison of integer expressions of different signedness: ‘size_t’ {aka ‘long unsigned int’} and ‘int’ [-Wsign-compare]
853 | if( wksFile.Read( buffer, filelen ) != filelen )
Don't use the same "post_*" icon in the treeview. The badge gives an
action that doesn't apply in the treeview.
Also renames different file blobs to the "file_*" prefix.
wxFile is dangerous, it's ::Write method is a direct map to the write syscall. It does not handle partial writes!
This must be handled in our code which we don't.
wxTextFile uses wxFile which uses write syscalls which means its unbuffered.
This makes file IO more expensive against network shares where it will flush far too aggressively.
wxTextFile is fine for reads however.
Focus was on the dialog instead of the panel. The dialog doesn't
have the IsUserPanel flag set and so wxEVT_CHAR processing doesn't
happen. (Why? I haven't a clue.)
Also fixed some more performance issues with the auto-column-widths.
Fixes https://gitlab.com/kicad/code/kicad/issues/6591
This unifies everything under a single architecture with a "don't
show again" dialog. Since everything now goes through the same
path it should be reasonably easy to make it do whatever we want
in the future.
Right now it presents 3 options: modify only unlocked items, override
locks and modify all items, or cancel command.
- pcbnew should use status bar on success like eeschema
- Add a helper to clear msgpanel and set it in one go to avoid redraw delays due to doing processing in between
Once the help button is clicked, the html help window is created but never destroyed.
It prevent Kicad to be fully closed
(closing Kicad does not fully close Kicad and leave something like a zombie process)
When preparing for clearing the tree, GTK requires walking through
parents. After calling "Freeze()" to protect against returning bad data
(see #6458 and #4471), we can no longer access Parent() from GTK and the
tree cannot be cleared.
The fix is to collapse the first element if it is open. This prevents
the common case of the history elements being expanded in the tree
Fixes https://gitlab.com/kicad/code/kicad/issues/6102
(cherry picked from commit 7eea344f91)
- remove outdated code or comment coming from old drawing code using wxDC
- move zoom values lists to zoom_defines.h
- fix incorrect zoom max and min values (gal scaling factor limits).
1) make sure we get the default netclass when we want it
2) escape for HTML (particularly important for "<invalid>", but also
for reporting user rule names, netclass names, etc.)
1) Separate out CONSTRAINT types
2) Filter both source and dest pads/vias for drilled holes when doing
hole-to-hole checks. We were checking the items being put into the
DRC RTree, but not the items we were scanning.
3) Add hole clearance to Board Setup Constraints panel.
Fixes https://gitlab.com/kicad/code/kicad/issues/6546
Fixes https://gitlab.com/kicad/code/kicad/issues/4683
The new shape architecture gives us the opportunity to make text
selection much more intuitive by actually looking at the glyph
shapes. Before text would be selected when you clicked in the
descenders area (which was usually blank given uppercase letters
and digits).
Fixes https://gitlab.com/kicad/code/kicad/issues/6525
So the new steals-focus protection stuff works well when there's a
focused control, but not as well when there's a modal dialog up which
happens not to have a focused control (or worse, a focusable control).
This adds a second mechanism for also checking to see if a modal dialog
is up (something that wxWidgets, true to form, makes very difficult).
Fixes https://gitlab.com/kicad/code/kicad/issues/6520
The wxWidgets call "ItemDeleted" still requires access to the item in
memory, so we delay deletion by storing removed items to the end of the
call
Fixes https://gitlab.com/kicad/code/kicad/issues/6301
Copy to clipboard save items (using S expr description) using wide strings
(not UTF8 encoding).
But Paste from clipboard was not converting the wide string to UTF8 string
when getting the stored data to send it as std::string to the S expr reader.
Fixes#6449https://gitlab.com/kicad/code/kicad/issues/6449
This allows the parser to properly interpret the sexpr version
of the footprint so that it can throw future format errors or
do version specific parsing properly.
Use wxCOL_WIDTH_AUTOSIZE instead of fixed column sizes. This doesn't fix
the initial sizer layout issue on wxWidgets 3.0 but at least resizing the
dialog has better column width behavior.
Previously the fill for shapes inside a footprint was not being
properly imported from older versions becase the default of no
flag changed from representing filled to representing no fill.
Introduce explicit filling information, and continue to treat no
flag on a polygon as meaning it is filled (which is the legacy
behavior).
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6393
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6390
This function is introduced in wxWidgets 3.1.5 and allows you to
query the event with if it should be checked or not instead of
having to figure it out based on the item type.
* Align the top of the buttons in the palette with the toolbar button
* Don't check the button in the palette, since the toolbar button will
show as checked.
wxWidgets 3.1.5+ on Linux will compile with the Wayland EGL
canvas as the backend instead of the X11 backend. This requires a
version of GLEW compiled with the proper EGL defines and a different
header/code for certain parts that are X11 GLEW specific.
This introduces an in-tree version of GLEW that will be built with the
GLEW_EGL flag then statically linked into the KiCad executables when
EGL support is needed.
When we look for icon scaling, we should be using the wxWidgets
parent as the scaling window not the tool manager's frame (even though
they are probably the same). (this also removes several dynamic_casts).
The accelerator strings really shouldn't be part of the translation,
and some translations have cause the accelerator keys to be incorrectly
handled. It is simpler to make it separate and just join them to the
translated string.
Make all accelerator modifiers use lowercased Ctrl instead of CTRL
to be the same as the other modifiers.
Fixes https://gitlab.com/kicad/code/kicad/issues/5992
This looks like it was always intended for macOS but was accidentally changed for Windows as well.
If this is a requirement on windows, I'm sure theres better ways to fix it....
In some cases, the BeforeReset() will cause an iteration over the tree
elements. If we have deleted an element before doing this, we risk a
corruption/crash.
Fixes https://gitlab.com/kicad/code/kicad/issues/6192
NOTE: because SCINTILLA_TRICKS is using a wxEVT_CHAR_HOOK,
it doesn't get the translated keycodes, so both ` and ~
look like ` to the call to ConvertSmartQuotesAndDashes
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6171
As if the original hack wasn't embarassing enough, the only change
here is to make the number bigger.
WICKED HILLARY wanted to use wxBoxSizers that are FAR TOO SMALL.
So sad.
But we're going to look at that. I think we're going to have
BIG wxBoxSizers. Probably the BIGGEST wxBoxSizers of anyone.
(The bug is that the Sheet Border swatch in PANEL_EESCHEMA_SETTINGS
doesn't otherwise get drawn unless that panel is the one showing
when preferences is opened.)
Correcting the error is more trouble than it is worth, and anyway
might not be corrected exactly the same way plotting/filling/DRC
is corrected anyway.
Use a segment count multiple of 2, because we have a control point on the
middle of the arc, and the look is better if it is on a segment junction
because there is no arc to segment approx error
The radius correction does not fix correctly approximation errors,
and creates serious issues for thin arcs:
- control point outside the arc
- HitTest active area outside the arc shown on screen
- Cairo and opengl gives different arc positions.
- the formula used in radius correction is probably incorrect.
Normally we don't want to resize when a control is open (such as a
drop-down), but it appears safe enough when all the controls are
just text-button controls.
Fixes https://gitlab.com/kicad/code/kicad/issues/6090
It was causing problems with surprising behaviour and issues with
allowing spaces in existing labels. We'll work on something better
for 7.0....
Fixes https://gitlab.com/kicad/code/kicad/issues/6073
Testing reveals 25000 is absolute overkill. A 4mil trace at 2000 is already an entire GAL canvas on 1080p.
Eeschema already uses its own setting of 1000 max.
The groundwork has now been laid for per sheet instance data. Initially
this only supports sheet page numbers but could be expanded to include
other per sheet instance information.
ADDED: Support for user defined schematic page numbers.
The dialog isn't actually movable with the mouse, so all the placement
logic inside DIALOG_SHIM is extraneous and actually causes the switcher
to appear on the wrong monitor if pcbnew was moved across monitors after
it was opened.
Fixes https://gitlab.com/kicad/code/kicad/issues/5789
This leaves them untranslated internally but makes sure their
translation strings exist so they can be dynamically translated
at the GUI level.
Fixes https://gitlab.com/kicad/code/kicad/issues/6020
Error codes can shift around if the enum ordering is
not maintained, which is more fragile than the settings
key which should never be changed after a new code is
created.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/6001
Setting a line thickness = 0 for graphic objects (circle, rect, line) is
allowed but creates issues for circles that were plotted a non filled shapes
but having a outline thickness = 0.
CHANGED: When using tools like the ruler, circle, arc, etc, they
display info text. If the view is flipped, the text is also flipped.
This MR fixes the flipped text and also corrects text X offset and
justification to match normal view.
CHANGED: When using tools like the ruler, circle, arc, etc, they
display info text. If the view is flipped, the text is also flipped.
This MR fixes the flipped text and also corrects text X offset and
justification to match normal view.
Iteration on a suggestion from Mikołaj Wielgus to resolve
elusive crashing issue when searching in lib tree in GTK.
GTK issues two commands when clearing (BeforeReset() and AfterReset())
BeforeReset() needs to have a valid model and cannot have selection
events during its lifetime. On MacOS and MSW, this is a NOP.
AfterReset() performs the re-association for GTK, removing the need for
the extra associate step. For MacOS and MSW, this is only the Cleared()
action.
Fixes https://gitlab.com/kicad/code/kicad/issues/5732
Fixes https://gitlab.com/kicad/code/kicad/issues/5891
To avoid issues with broken Gerber readers use aperture macros with shapes
without rotation when more than one primitive is required.
In many gerber readers, rotation of a set of primitives is broken
(do not follow Gerber requirements)
This will always show 1 unit from each system, with the primary unit
being the current frame unit and the secondary unit being the
most recent unit used from the other system. These are saved in
the settings, so they are saved between runs.
* Make the ruler able to switch to mils after creation
* Cleanup an unused flag in Pcbnew dimensions
* Move unit changed notification into EDA_DRAW_FRAME so more
frames to use it.
* Allow switching units when GerbView ruler tool is active
Switch Eeschema to use the built-in printing routines
because its precisions are close to those and it is
cleaner.
Give mils a precision of 2 decimal places to match
the precision shown in inches.
This uncovered a memory corruption bug in MODULE's move operator,
several bugs in MODULE's move and copy constructors, and a bug in
BOARD's GetItem() call.
It also bumps the file format for saving/restoring groups inside
footprints.
Using CopyFile() that can collide with a windows header create hard to
understand errors, including link errors.
Renaming this function avoids these strange errors.
Previously, init order depended on the ordering of the
tool state map, which is opaque from the point of view of
registration. This makes it challenging to make one tool's
init depend on another. With this change, registration
order defines init order.
They're only on screen when they're being used, and we don't have
a GAL available to calculate their actual extents from (since their
text scales with zoom).
Fixes https://gitlab.com/kicad/code/kicad/issues/5845
in most of files, including wx.h is not necessary, when only 2 or 3 wx files must be included.
Moreover, on windows, including wx.h sometimes create compil warnings about
shadowed vars defined in some specific windows headers.
There were issues on OSX where the mouse being captured
by the parent toolbar would lead to seg faults, so release
the mouse on opening the palette.
Releasing the mouse then means that the mouse states become
confused, so we need to manually clear all the mouse states
when we open the popup.
Fixes https://gitlab.com/kicad/code/kicad/issues/5803
Fix compile error
Fix string format to use %ld instead to work on clang in CADSTAR Archive importers
Add virtual destructor to CONNECTION in CADSTAR_ARCHIVE_PARSER
Fixed missing tokens that weren't parsed before:
- Danglers (in NET_SCH)
- Pin numbers (in SYMBOL)
- HidePinNames in both PART and PART::DEFINITION, defaulting it to false
plotter.h contains now only a header common to all plotters.
The code does not actually change, but it allows modifying a specific plotter
without recompiling most of kicad files.
CHANGED: GetDocumentExtents() in 'eda_draw_frame.h' now has a bool
parameter "aIncludeAllVisible" with a default value "true" which makes
it behave as it did before adding parameter. If "aIncludeAllVisible"
is false, the returned bbox ignores some items depending on which
program it is running in.
CHANGED: Made "Zoom to Objects" use only PCB edge in Pcbnew. This
allows text, notes, etc outside the PCB edge to be excluded in the
zoom calculation.
CHANGED: Added "Zoom to Objects" to Pcbnew main menu, and to RMB context
menus for Eeschema and Pcbnew.
Fixes https://gitlab.com/kicad/code/kicad/issues/5787
The infobar changes the size of the visible screen, so adding/removing
it will shift the screen center, causing the position of onscreen
objects to move up/down. This changes the sizing to pin the bottom
corner position when showing/hiding the infobar
Fixes https://gitlab.com/kicad/code/kicad/issues/5776
This changes the file format. All previous copper layers that had a user
defined name are forced back to the canonical name and the user defined
name is stored as an optional quoted string in the layer definition and
only used for UI and plotting purposes. All copper object layer names
are now the canonical name for internal file use.
ADDED: Nine new user definable non-copper layers that can be optionally
added to the board layer stack.
CHANGED: All board layers can now be renamed by the user.
CHANGED: User defined layer names can now contain space characters.
Fixes https://gitlab.com/kicad/code/kicad/issues/1969
The OpenGL missing segments (when small) are due to rounding in larger
coordinates. The GAL shader uses floats to represent int32 values for
position and distance. Thus, at larger coordinates, the smaller integer
values cannot be represented accurately. This tests for the rounding
error and, if it exists, draws a plain circle instead
Fixes https://gitlab.com/kicad/code/kicad/issues/5751
These settings objects could be created in a constructor/destructor
so we should catch the exception since those are noexcept.
Also change the settings trace to match the other kicad traces
as KICAD_SETTINGS
This exception will probably never be thrown in real life,
but the constructors are normally noexcept, so throwing
any exception from the json library causes Coverity to
have a fit.
Windows specific, because other OS do not accept user bitmaps in ckeckable menuitems
the bug was due to the same bitmap was set for each state for these menuitems.
Fixes#5622https://gitlab.com/kicad/code/kicad/issues/5622
Also improves the SNR and consistency of the menu item text. For
instance, a position is rarely useful, while relative sizes can be.
Also removes some unnecessary repitition, such as "Graphic Rectangle"
when "Rectangle" communicates the necessary information.
CHANGED: The margin used in 'Zoom to Fit' is now 2% instead of 10%.
ADDED: Added 'Zoom to Objects' to Eeschema which does not include
the page and border in the bbox calculations.
CHANGED: Removed pre-existing code that tweaked the center to account
for the scrollbars. It actually made the view off center. Removing it
results in perfectly centered zooms.
Fixes https://gitlab.com/kicad/code/kicad/issues/5145
The previous fix (d4461f6) removed all vars before re-add them.
Clear all vars created issues with externally defined variables (the internal
initial value was lost)
Now only old, no longer existing, vars are deleted.
Fix also a potential issue related to non ASCII7 in last stored path.
When updating common environment variables list, the initial list was never
deleted. Therefore one could not remove an existing var.
The common environment variables list is now deleted before updating.
Improves implicit rule reporting.
Makes some internal names more consistent.
Moves DRC_REPORT to the test framework.
Removes priority (which isn't supported in the grammar)
This is a board file format change to account for the new properties.
Also, we now only store the critical information about the dimension's
geometry in the board, rather than storing every drawn line.
The DIMENSION object is now an abstract base, and ALIGNED_DIMENSION
is the implementation that exists today (we will add more dimension
types in the future)
1) For a while now we've been using a calculated seg count from a given
maxError, and a correction factor to push the radius out so that all
the error is outside the arc/circle. However, the second calculation
(which pre-dates the first) is pretty much just the inverse of the first
(and yields nothing more than maxError back). This is particularly
sub-optimal given the cost of trig functions.
2) There are a lot of old optimizations to reduce segcounts in certain
situations, someting that our error-based calculation compensates for
anyway. (Smaller radii need fewer segments to meet the maxError
condition.) But perhaps more importantly we now surface maxError in the
UI and we don't really want to call it "Max deviation except when it's
not".
3) We were also clamping the segCount twice: once in the calculation
routine and once in most of it's callers. Furthermore, the caller
clamping was inconsistent (both in being done and in the clamping
value). We now clamp only in the calculation routine.
4) There's no reason to use the correction factors in the 3Dviewer;
it's just a visualization and whether the polygonization error is
inside or outside the shape isn't really material.
5) The arc-correction-disabling stuff (used for solder mask layer) was
somewhat fragile in that it depended on the caller to turn it back on
afterwards. It's now only exposed as a RAII object which automatically
cleans up when it goes out of scope.
6) There were also bugs in a couple of the polygonization routines where
we'd accumulate round-off error in adding up the segments and end up with
an overly long last segment (which of course would voilate the error
max). This was the cause of the linked bug and also some issues with vias
that we had fudged in the past with extra clearance.
Fixes https://gitlab.com/kicad/code/kicad/issues/5567
You can now enable and disable snap to grid when drawing/editing across
all apps. You can also tie snap to grid to the visibility of the grid
to allow rapid enable/disable via grid display.
Loading speed fixed by changing the way CADSTAR_ARCHIVE_PARSER::InsertAttributeAtEnd works (we now have a new attribute in each node to keep track of how many attributes there are). Now loads a 30,000 line file in 10seconds instead of 25 minutes!
Better fix than a0df876d
For new users, if this folder does not exist, saving colors does not work,
because if this folder does not exist, it is not created.
There was a regression in v6 where the zoom to selection toolbar
item wasn't canceling the tool when pressed and the tool was active
(it was in v5). This implements a more generic framework for canceling
tools on button presses.
Fixes https://gitlab.com/kicad/code/kicad/issues/5103
Also moves to WX_GRID to get rid of some wxGrid bugs, and moves the
provision of attrs to the GRID_TABLE (as those applied to the grid
are ignored when a table is specified).
Fixes https://gitlab.com/kicad/code/kicad/issues/5260
For instance, we get things like high-contrast-mode from the pad
dialog when rendering a pad preview, but we want the colours from the
parent PCB_BASE_FRAME.
The stepping is in a static event handler, so it is called
after the dynamic handler and so the dynamic handler must
allow the event to continue processing.
Fixes https://gitlab.com/kicad/code/kicad/issues/5319
windowClosing() calls Destroy() when the wxCloseEvent has no veto.
This is fine for usual EDA_BASE_FRAME frames, but not for frames shown in modal mode.
In modal mode, windowClosing() should not call Destroy(), because the calling frame
expects the instance not deleted after closing.
(the caller has to call Destroy() only once the frame can be actually deleted)
LayerName() can now be called to get the default, translatable name
for any board layer. LSET::Name() is used for the untranslated
names required for parsing board files.
We use the LIBID for board files to locate the correct library for the
footprint. Once exported, the footprint should be associated with the
library that contains it, if any.
Fixes https://gitlab.com/kicad/code/kicad/issues/5400
The center point on polygons now maintains the axis of the dragged line
and, optionally with Ctrl pressed, maintains the slope of the adjacent
segments as well.
This also fixes a longstanding issue that prevented the ctrl-snapping
from using the original point rather than the last updated point when
constraining.
Fixes https://gitlab.com/kicad/code/kicad/issues/2465
For now, much of KiCad depends on Prj() working, so when we
are asked to unload a project, immediately load the null project
so that nothing breaks.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/5374
This commit applies display origin transforms to all Pcbnew
dialog classes that use UNIT_BINDER for their formatting:
* DIALOG_CREATE_ARRAY
* DIALOG_FOOTPRINT_BOARD_EDITOR
* DIALOG_GRAPHIC_ITEM_PROPERTIES
* DIALOG_GRID_SETTINGS
* DIALOG_MOVE_EXACT
* DIALOG_PAD_PROPERTIES
* DIALOG_POSITION_RELATIVE
* DIALOG_TEXT_PROPERTIES
* DIALOG_TRACK_VIA_PROPERTIES
This commit adds the PCB_ORIGIN_TRANSFORMS class, which is derived
from the ORIGIN_TRANSFORMS class, and provides a set of templated
functions to convert PCB coordinates between internal representation
and display representation. It extends the ORIGIN_TRANSFORMS class
to understand the three user-selectable display origins and the
coordinate direction display options.
This commit modifies the UNIT_BINDER class to invoke the ORIGIN_TRANSFORMS
methods to support Display Origin Transforms.
The EDA_DRAW_FRAME class is modified to instantiate an ORIGIN_TRANSFORMS
object providing null transforms. A function is provided to allow the
UNIT_BINDER to find the ORIGIN_TRANSFORMS object in an overrideable manner.
This commit adds the ORIGIN_TRANSFORMS class to support Display Origin
Transforms in all KiCad applications.
Functions are provided to perform four basic types of origin coordinate
transforms:
* Transform a relative coordinate from internal to display form
* Transform a relative coordinate from display to internal form
* Transform an absolute coordinate from internal to display form
* Transform an absolute coordinate from display to internal form
These functions are supported for data types "int", "long long int",
and "double". The default implementations for all but "int" simply
return their input unchanged; the implementation for "int" invokes
the implementation for "long long int".
The expectation is that the different KiCad applications will create
derived classes from this base class and override the functions as
needed. Protected template functions are provided for the standard
translations to maintain consistency within the derived classes.
A subsheet may have more than one instance of a hier label,
but it's generally a mistake if there is no matching hier label
for a port on the parent sheet.
This is harder to do today now that we don't have manual tool
for placing hier ports, but it's still possible if you place
ports but then rename the label on the subsheet.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/3468
We probably don't need it, but some code attempts to dereference
it so safer to have one then to start checking everywhere for
dereferences.
Fixes https://gitlab.com/kicad/code/kicad/issues/5353
Display warning infobar in the board/schematic setup when no project
is loaded, since most of the settings in those dialogs are saved in
the project and not in the board/schematic file.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/4868
Short net names are not unique; full names with paths must be used.
Added a grid cell renderer that does the escaping, to make it easier
to display net names in grid cells.
Once you unescape a net name, you can't go back to the escaped form
because you can't assume which `/` should be {slash} and which `/`
Because of this, we cannot use Unescape/Escape on the data model in
the netclass setup panel, and instead do the Unescape in the view.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/5331
This time remove the push/pop from the picker tools as that's
responsible for the issue of trying to re-activate the move action
when its popped. Instead do the push/pop from the client code
of other actions that need it, and not at all from the move-with-
reference action.
Fixes https://gitlab.com/kicad/code/kicad/issues/5336
* Make the app progress indicator only have the indeterminate state
when the taskbar indicator is used (causes an uused variable warning
on wx<3.1)
* Remove unused dry run variable in pcb_netlist.h
* Remove unused forceDropAnnotations from the paste special dialog
since the dialog only controls keeping them.
Cairo Polyline and Polygon draw functions share a common routine. While
Polygons must have 3 points to allow triangulation, a polyline (like our
text) need only have 2
This resolves a crash when passing an empty polygon and alerts debug
users to possible generation cases when bad polygons are created.
Thanks for Frans Zellman
(https://gitlab.com/kicad/code/kicad/-/merge_requests/365) for
identifying the issue.
This freeze/thaw is different than the update locker freeze/thaw,
and is needed to prevent crashes due to accessing invalid (already
freed) data on GTK.
Fixes https://gitlab.com/kicad/code/kicad/issues/5289
The tree model adapter appears to have update issues when modifying the
scores while it _might_ get updated. This moves the lock higher and
removes the extraneous Freeze/Thaw call.
Unfortunately, this only exposes an additional issue in the tool handler
but this will hopefully be easier to debug.
Fixes https://gitlab.com/kicad/code/kicad/issues/5206
The use of printf, wxLogDebug, and std::err/std::out causes excessive
debugging output which makes finding specific debugging messages more
difficult than it needs to be.
There is still some debugging output in test code that really needs to
be moved into a unit test.
Add debugging output section to the coding policy regarding debugging
output.
Flags != language See http://www.flagsarenotlanguages.com We now use
local, untranslated language names for all languages.
Languages that have not been updated in >5 years and have less than 15%
of available strings translated have been removed from the menu options.
If a translator steps up to update the .po files, we can re-add them
This leaves the decision to check/enable menu items to the main UI
conditions, and only the menu has control over showing/hiding the menu
items. Also rip out a special case for the preferenes item that isn't
needed on OSX anymore since all the main menus have been moved to
ACTION_MENUs now.
CHANGED: Don't run the hotkey if the action's UI elements aren't enabled
This makes it so the action can't be run from either the hotkey or the
UI if its enabling conditions are not met.
* Frames moved: cvpcb, cvpcb footprints frame, gerbview, pagelayout editor
This also introduces new EDITOR_CONDITIONS that are used to set the
conditions of very common editor settings.
Also, some IDs were converted to tools in the pagelayout editor.
This allows for the tool framework to keep track of a universal
set of conditions for the UI state (enabled/checked/shown) for
controls of actions. It removes the need for the main menubar
menus to be CONDITIONAL_MENUs and be rebuilt on each open,
and instead makes the updates of the check and enabling of
items handled in the native wxWidgets way.
This commit switchs the 3d viewer and kicad project manager window
over to this system.
EDA_ITEM is a child of VIEW_ITEM, so a static_cast is not appropriate,
since in some cases it could be called with a non-EDA_ITEM argument.
This was triggering an ASAN heap-buffer-overflow in GerbView.
The variables in the common settings struct are only updated on
save, so Python must use the ones from Pgm to get its values.
This does lead to the observation that Python's changes to the
variables do affect KiCad (they can break resolvers). So apparently
it can mess with us but we can't mess with it easily.
Also, improve the environment variable tracing infrastructure to capture
more changes.
Just setting the text field is not guaranteed to fire
a text event, so we must forcefully call the regenerate
function to ensure the preselect is handled.
Fixes https://gitlab.com/kicad/code/kicad/issues/4105
The base GAL has the linewidth property already, and its
accessor will only return the base version. This was causing
problems with the Cairo printing GAL, since that setter wasn't
using the base class version. Also, this removes the print-specific
setter, since the actual setting of line width shouldn't be done
there and is instead done where the drawing happens.
Fixes https://gitlab.com/kicad/code/kicad/issues/5089
This moves the generated files out of the source tree and into
the build directory. They are now regenerated each time they are
needed, based on the timestamp of the generated file compared to
the timestamp of the lemon file.
To do this, we also bundle lemon into the thirdparty directory
and build it for ourselves since it is a very tiny program and
not all platforms seem to distribute it in a consistent manner.
Fixes https://gitlab.com/kicad/code/kicad/issues/5013
This option removes copper layers from pads and vias where they are not
connected to other board elements. This allows the inner layers to be
more closely routed if the via landing pad is not needed.
Fixes https://gitlab.com/kicad/code/kicad/issues/1835
This ensures the colors used by the status text pane in the preview
widget are the same as the canvas, so there is a seemless transition
between the two.
Additionally, remove the scrollbars from the symbol preview widget
in the place symbol dialog - they are pointless.
Before this, the environment variables inside Python wouldn't reflect
the updates to them made after the interpreter was started in Pcbnew.
This will call into Python and set the variables when they are changed,
since Python can't synchronize itself when running in an embedded
interpreter.
Fixes https://gitlab.com/kicad/code/kicad/issues/5071
ADDED: Progress indicator in the taskbar
This adds a progress indicator to the Windows and macOS taskbar
icons to display the progress of some operations.
Note, this requires wxWidgets 3.1+
KiCad stores 3D cache files but never gets rid of any of them.
This patch adds a new function called 'CleanCacheDir()'. Any cache
files older than the passed 'number of days' parameter are deleted.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/1928
Store list of previously open projects only in kicad.json
Keep all management of open projects in SETTINGS_MANAGER
Also add kicadSettings() for convenience
On platforms with limited framebuffer attachments, like GC7000L
driven by the open source etnaviv driver, we can still use
GPU acceleration by drawing directly to the main buffer.
EDA_DRAW_PANEL_GAL::onPaint checks if an overlay target is
available in the GAL, and if not, redraws the whole view if the
overlay target should be dirty.
Clearing of the overlay target is a no-op if there is no overlay
buffer.
Signed-off-by: Lukas F. Hartmann <lukas@mntre.com>
The fix convert all std::string storing a path to wxString (unicode support)
wxString were already used at many place to store paths, but not all.
For internal calculations mixing char strings and wide char strings is a recipe
for bug: any missing conversion between UTF8 and wxString breaks paths.
When drawing segments that are smaller than the segment width, OpenGL
did not use realistic values, leading to hidden, small tracks. Instead,
we set the track to only draw a segment when the length is at least 1
radius long (so that we can see the full semi-circle at the track end)
Fixes https://gitlab.com/kicad/code/kicad/issues/5009
We output a 0 opacity text in the SVG plotter to allow searching. When
this text is changed to 100 opacity, it can show up on the user screen
and so needs to be mirrored to match the stroke font output
Fixes https://gitlab.com/kicad/code/kicad/issues/5001
By default KiCad will now print each polygon point on its own line.
This adds to the vertical distance for large polygons but makes revision
control much cleaner as single point addition to a polygon does not
propagate to a diff over the full polygon.
Users/developers who want to save the files using the 4-points per line
have the ADVANCED_CONFIG setting 'CompactSave' which will provide the
original save method
This way, when the user changes their color theme, any sheets
that did not have a specific color set will change with the theme.
Also add a button to clear color overrides from a sheet, because
any schematics that have been saved before this change will have
the colors set to something other than UNSPECIFIED.
'.txt' is a common file extension for drill files. This Merge
Request adds it to the list of extensions used in the File Open dialog
for Excellon Drill files.
Fixes issue https://gitlab.com/kicad/code/kicad/-/issues/2124
We'll need this if we support the "L == foobar" syntax, and besides
it should really be up to the parser client whether or not they use
identifiers with no function call or property reference.
It also allows us to generate error messages for unknown identifers.
This API doesn't transfer ownership, so no smart pointers are required --
this just needlessly tightens requirements on the user of the interface.
(Fixes five instances of MSVC C26410 warning)
This is particularly important to keep the user from having to
enter overly verbose statements such as:
A.Type == 'via' && A.Via_Type == 'buried'
when:
A.Via_Type == 'buried'
is perfectly clear.
- Prevent crash on project tree for "Empty project" item
- Correctly handle loading of legacy projects in tree view
- Fix an issue where legacy projects would not get saved
Fixes https://gitlab.com/kicad/code/kicad/-/issues/4944
- convert expression string tokens to single-quote-delimited
- fix bug where netclass assignments weren't getting updated after
board setup dialog
- move property manager rebuild to lazy evaluation
- improve performance with wider use of const&
- retire DRC_SELECTOR stuff
- use wxString for GUI stuff (particularly translated stuff)
- fix EqualTo() to return false instead of asserting when op types
don't match
- fix buffer overruns with fixed-size string buffers
- make expression function calls case-insensitive
- integrate expression errors into rule parser
- produce more and better error messages
- keep BOARD_ITEM ptrs const as long as possible
- fix a couple of uninitialized variables
This moves the program-specific code (e.g. BIU files) into
the program tests.
Also, create title_block.cpp to break a dependency that pulled
in eda_text.cpp when using the TITLE_BLOCK object.
Str2Double assumes current locale. We usually switch the locale when
reading files but we should be using the function that explicitly gets
the C-locale conversion.
The config.h header for ngspice is not packaged with all platforms so
use pkg-config to fetch the version information when available. When
pkg-config is not available, check if the ngspice/config.h file is
installed on the system before including it to build the ngspice version
string. If neither pkg-config or ngspice/config.h is available set the
version string to "unknown".
Fixes https://gitlab.com/kicad/code/kicad/issues/4851
As expected, the required padding difference between wxStaticText and
wxHyperlinkCtrl varies depending on the platform. Restore the original
padding which was correct for windows and add the extra padding required
for GTK builds. Someone with MacOS should verify if the padding looks
correct and change the padding for MacOS as required.
List of hidden nets stored in project local settings
Hide/Show actions in context menu only for now, will
add them to some more GUI places soon.
Ref https://gitlab.com/kicad/code/kicad/-/issues/1951
The previous hash was not unique for changes in integer/boolean values.
Generic hash_combine routines provide decent coverage for limited extra
cycles.
The old way of checking for focus loss caused GTK to be unable to
even open the combobox. This way checks for the event sent when the
list closes and uses that to close the grid editor.
Fixes https://gitlab.com/kicad/code/kicad/issues/4617
LoadProjectSettings changed to take place after the board
has been loaded so that board-specific project settings can
be applied (such as net visibility and color overrides)
ADDED Eeschema-specific netclass settings including wire and bus
thickness, color, and line style.
Netclasses override individual wire & bus colors and line styles.
If that proves an issue we might look at something more sophisticated
with inheritance.
Fixes https://gitlab.com/kicad/code/kicad/issues/4581
There is a difference between how wxStaticText and wxHyperlinkCtrl
controls are rendered causing alignment issue between the two. The
cheap and dirty solution was to pad the wxStaticText but this may
yield inconsistent results depending on the platform.
Fixes https://gitlab.com/kicad/code/kicad/issues/4843
The issue for the grid color was due to the fact there are 2 places to
store the color: the color settings and the m_gridColor GERBVIEW_FRAME member.
The worksheet color (color set to RED after a color change in layer render)
is a bit strange: looks like LAYER_GERBVIEW_WORKSHEET and LAYER_WORKSHEET
are both used to draw the worksheet.
When Validate() find an out of limits user value, it displays the limits.
However, the displayed limit value was incorrectly converter to internal units,
and strange values were displayed.
GTK only calculates new widths once the tree is displayed,
so calling Refresh after updating the tree but before display
will return a column width of 0. Instead, use saved column
widths if an invalid width was returned.
Fixes https://gitlab.com/kicad/code/kicad/issues/4837
Adds a possibility to replace properties inherited from base types with
a more specific ones. For example, such properties may have:
- different meaning which should be reflected in property name
(e.g. TRACK::{G,S}etWidth() sets actual track width, but
VIA::{G,S}etWidth() modifies the diameter)
- different set of possible values (e.g. BOARD_CONNECTED_ITEM::SetLayer()
should accept any copper layer, but MODULE::SetLayer() works only with
F.Cu and B.Cu)
Introduces classes:
- INSPECTED: base class for types taking advantage of
generic properties system.
- PROPERTY*: meta-data storing information about properties
- PROPERTY_MANAGER: singleton class to get properties data
- New public static function OPENGL_GAL::CheckFeatures() gets called in EDA_DRAW_PANEL_GAL::SwitchBackend() before switching to OPENGL_GAL
- Moved all OpenGL feature checks from OPENGL_GAL constructor to OPENGL_GAL::init()
Fixes https://gitlab.com/kicad/code/kicad/-/issues/4714
As long as the arc angle stays below <60°, it will automatically choose between
clockwise and counter clockwise. This allows the user to choose the direction
with a simple mouse movement.
Swap syncs can limit the redraw rate as the screen waits for previously
issued syncs. Setting this to -1 allows for adaptive swapping
(resorting to unsynced if it falls behind) if it is supported by the
card but will fall back to unsynced (0) if the adaptive is not
supported.
Fixes https://gitlab.com/kicad/code/kicad/issues/4226
- Fix file extension for new project
- Fixes for exceptions on MSW
- Fix some ASAN issues
- Allow SETTINGS_MANAGER to run headless
- Don't flag schematic as modified after schematic setup is closed
- Don't automatically unload projects when LoadProject is called
- Don't unload project if it's the same as the current one
- Make sure to properly init/de-init template field names
Per discussion on the developers list, this old system
no longer provides much value and is seen as annoying
by many users. The new save logic should prevent any
cases of file corruption on save, which was a major
reason for the backup file system existing.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/2012
Various architecture upgrades to support this.
Creating a BOARD now requires a valid PROJECT, which caused
some (mostly transparent) changes to the Python API internals.
ADDED: Project local settings file
CHANGED: Board design settings are no longer stored in PCB file
CHANGED: Net classes are no longer stored in PCB file
CHANGED: Importing board settings now reads boards, not just projects
Fixes https://gitlab.com/kicad/code/kicad/-/issues/2578
Fixes https://gitlab.com/kicad/code/kicad/-/issues/4070
Remove extraneous use of FLAG0 from tracks cleaner (it was checked but
never set).
Fix issue in expand connections where two parts of it couldn't agree
on the same flag (BUSY vs SKIP_STRUCT), and where the second part was
clearing the flag instead of setting it.
Remove obsolete HIGHLIGHT infrastructure (we now use selection).
Remove extraneous use of BUSY flag in several places (it was never
set).
Removes the TTL triangulator in favor of the delaunator triangulator.
This removes the only AGPL code in the KiCad codebase and therefore
allows the full project to be licensed under the GPLv3.
Add missing plot and print changes for the new bus entry properties.
ADDED: Junction properties diameter and color can now be edited.
Fixes: https://gitlab.com/kicad/code/kicad/issues/4593
when a wxTextCtrl has the focus but is read only, and cannot use a CHAR event.
It fixes an issue in Kicad manager (menus with accelerator not working) when
the wxTextCtrl window showing messages has the focus.
It's currently only supported in the Footprint Editor. It could be
easily added to the board editor (all the code is there), but the board
editor is a little short on room in the drawing tools toolbar.
As of ab83c862, the canvas scaling setting is now used on OSX
(before it was ignored). Legacy settings would have this set to 1.0,
which would not automatically scale the canvas and break on Retina
displays. OSX auto detection works well enough in wx 3.0, so we
can use it now.
Due to rounding issues, sometimes (especially for rotated pads) the region
(4 segments+4 arcs) was incorrectly closed (1 unit (nanometer) mismatch between
start point and end point.
Although it does not create bad shape, its breaks the round rect pad identification
in CAM tools.
start point and end point are now the same.
The scaling factor stored inside the canvas is created by a DPI_SCALING
helper, which will call the platform-specific functions if no user scaling
is specified. This change only affects OSX and Retina displays, so this
now also allows custom scaling to be used on OSX if desired (although it
shouldn't be needed, since wx has detection for it in 3.0.4).
A note to developers, please do not set the minimum and/or size of bitmap
buttons. It causes bitmaps to get clipped using GTK on Linux. If the
bitmap button size is not acceptable, then supply an appropriately sized
bitmap rather than attempt to force the wxWidgets sizing mechanism to do
what you want. This almost always causes platform differences that do
not work well.
* Implement ReparentQuasiModal for OSX natively
* Implement ForceFocus of OSX natively
This change means we no longer rely on the kicad-specific functions in our osx wx fork.
When the ERC is run and a component has a ERC error linked to it, if it is deleted,
when reopening the ERC dialog, the dialog crashed due to a not found item
(null pointer use)
You can now choose the behavior of dragging with the
middle and right mouse buttons.
You can also choose which modifier keys to use for
panning and zooming with the scroll wheel or trackpad.
You can also customize the zoom speed, which makes
it possible to have a good zoom experience on a wider
range of input devices.
You can also now zoom by dragging with the right or
middle button if desired.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/3885
Fixes https://gitlab.com/kicad/code/kicad/-/issues/4348
Note: this is a basic implementation but it could be
improved once we include bus information in the netlist
and pcbnew can natively keep track of buses and nets
instead of just nets.
Fixes https://gitlab.com/kicad/code/kicad/-/issues/4158
The escape key event shouldn't be propagated after the first
tool dispatcher. Propagatint it causes it to go to parent frames,
which can mean problems arise (such as in cvpcb, where an
escape key press in the fpviewer frame was closing the main
cvpcb window when it is propagated).
CHANGED: Cvpcb fpviewer and the pcbnew fpviewer no longer have an options dialog
ADDED: Add a side toolbar to the pcbnew footprint viewer (and the measure tool)
This also cleans up some of the settings structs in the viewers, since
it was somewhat confusing before.
Fixes https://gitlab.com/kicad/code/kicad/issues/2205
* Consolidate the measure tool into one tool (this gives cvpcb
unit changing and snapping capabilities in its measure tool)
* Transition cvpcb to use actions for the sketch modes
* Replumb how magnetic items settings are stored and used
* Move it to a panel along with the canvas to have a better UI
* Allow the infobar to automatically close after a set time
CHANGED: The eeschema find notifications now use the infobar instead of
a popup window
This widget allows for non-intrusive display of text
above the editing canvas. Currently, this is used
for displaying the read only status of the files.
Set up a new lineage for SCH_ITEMS to get back to the SCHEMATIC
they live on: Items will all be parented to the SCH_SCREEN that
they are added to, and each SCH_SCREEN will point back to the
SCHEMATIC that it is part of. Note that this hierarchy is not
the same as the actual schematic hierarchy, which continues to
be managed through SCH_SHEETs and SCH_SHEET_PATHS.
This is required, because Ninja otherwise doesn't properly rebuild after
updating the version string header file.
Because BYPRODUCTS requires CMake 3.2, bump the minimum version and remove
now unused compatibility code for older CMake versions.
The window decorations introduce an offset to our window size, since
they are not used when restoring the window size at startup they are
added by the window manager again.
Fixes https://gitlab.com/kicad/code/kicad/issues/4278
Migrate COLOR_SETTINGS 0->1 to remove fpedit section
Migrate FOOTPRINT_EDITOR_SETTINGS 0->1 to use new theme if created
Remove COLOR_CONTEXT that is no longer needed
There has been a long standing (since the beginning of the project?)
issue with sharing schematics between projects. It has been somewhat
supported for complex hierarchies (a sheet shared multiple times in a
single design) but it has not been well supported for simple hierarchies
(the symbol references cannot be changed in the shared schematic). This
issue has been resolved by moving all of the symbol instance sheet paths
from the symbol definitions in the all of the project files and save all
symbol path instances in the root sheet. This ensures that orphaned
symbol instance paths do not accumulate in shared schematic files and
that designs that reuse schematic in simple hierarchies can how have
different references. It also allows the root schematic from one project
to be uses as a sub-sheet in another project.
When legacy schematics are loaded, all sheet and symbol UUIDs are
converted from time stamps to true UUIDs. This is done to ensure there
are no sheet path instance clashes between projects. That being said,
there are no checks for this. It is assumed that the probability of
UUID clashes is so low that it doesn't make sense to test for them.
Texts were drawn with a minimal line thickness = GetDefaultPenWidth().
The default pen width can be to large for small texts.
So the actual text thickness is now always clamped.
* Push all sizing operations into EDA_BASE_FRAME
* Save the unmaximized window size when maximizing
so that we can then save it in the config if the
window is maximized. Otherwise the config ends up
with the maximized size saved, and weird behavior
occurs when unmaximizing on the next opening.
Remove translation mark for strings used in debug, or strings
that cannot be translated (for instance because they are char strings
instead of wide char strings)
Iterating over the tool stack, we potentially remove the current
iterator. If this removal happens at the beginning of the toolstack, we
cannot decrement the iterator to a position before the stack without
creating an invalid state.
Now only reposition a window if it is completely on a
disconnected display or if only one corner is on screen
and it is within a region close to the screen border.
CHANGED: Window position on startup should be preserved more
It belongs out in the calling loop so that if someone else uses
finishTool() later they won't get bit by it.
This also fixes a crash bug where we weren't deactivating all tools
because we couldn't back up at the beginning of the stack (and the
loop increment therefore went past the first element).
Fixes https://gitlab.com/kicad/code/kicad/issues/4206
These pads were plotted as a segment. This is not the right way.
Pads must be flashed or plotted as regions, not painted.
They are now plotted as Gerber regions round rectangle pads.
These regions are similar to flashed pads.
Previously, the region was a usual polygon with arc approximated by segment.
Using a region with arcs is a better way because it allows CAM tools to
identify this region as a round-rect pad.
A side effect is a better shape and smaller files, however not really noticeable in fact.
Please note that the symbol cache is not embedded in the schematic file
to allow for round robin testing with the existing file format. Once
the parser round robin testing is complete, the symbol cache will be
embedded in the schematic file.
Previously, for historical reasons, they were added only if
Include Netlist Attributes option was on.
But Aperture Attributes have nothing to do with Netlist Attributes, and good
Gerber files must include them.
Let cmake generate the needed version strings, so we don't
have to spend program time doing it. This simplifies the
settings manager versioning.
Also, convert some file line endings to UNIX from Windows.
A more robust fix for https://gitlab.com/kicad/code/kicad/-/issues/4015.
Some buggy SVG interpreters can't handle 0-length ovals. In this case,
they are meant to be circles, so we can export as circles in our
plotter.
Fixes https://gitlab.com/kicad/code/kicad/issues/3995
When editing pcb items, the creation of a new net to connect existing
pads or traces can be a useful shortcut. This inserts the ability to
optionally create a new net from the Net Selector dropdown menu.
The canvas size is not guaranteed to be strictly > 0, so we need to
enforce a minimum returned size before dividing by it or passing to GAL
initialization
Replace SEVERITY_ERROR by RPT_SEVERITY_ERROR to avoid collision with a system definition.
Replace other SEVERITY_XXX by RPT_SEVERITY_XX for consistency.
Fix compil warnings and some other compil issues.
CHANGES: Symbol library file format has been converted to s-expressions.
Add support code for picking apart symbols at some future junction that
will allow full inheritance conversion of existing symbol libraries. For
now, symbols arranged by unit and body style numbers are nested for round
robin testing of symbol libraries once the parser is complete.
Config values were not stored into the right variables.
Make also an option persistent during the session
in DIALOG_UPDATE_PCB and DIALOG_NETLIST
DIALOG_UPDATE_PCB and DIALOG_NETLIST match options: use same order in dialogs.
Keeping a pointer to the actual file history inside a special
file history menu led to many cases of use after free crashes,
so instead rework the actual file history to add the menu
items.
Fixes https://gitlab.com/kicad/code/kicad/issues/3741
For some reason, OSX won't return the minimum window size properly
using GetMinWidth/GetMinHeight, so it would not properly adjust
windows with saved size (0,0).
It is already added with MSVC, and must be added with gcc/mingw
However, the cmake option:
add_definitions( -DBOOST_UUID_FORCE_AUTO_LINK )
does not work on msys2 (at least with my cmake version), so another syntax is used.
CHANGED: Settings are now stored in versioned sub-directories
ADDED: First-run dialog for migrating settings from a previous version
CHANGED: Settings are now stored as JSON files instead of wxConfig-style INI files
CHANGED: Color settings are now all stored in a separate settings file
CHANGED: The symbol editor and footprint editor now have their own settings files
CHANGED: Color settings are no longer exposed through BOARD object
CHANGED: Page layout editor now uses Eeschema's color scheme
Settings are now managed through a central SETTINGS_MANAGER held by PGM_BASE.
Existing settings will be migrated from the wxConfig format on first run of each application.
Per-application settings are now stored in one class for each application.
Using a UTF8 char inside a C string can work on unix, but not on Windows.
It must be explicitly converted in a unicode value inside a wide string
(like a wxString)
When adding a .pretty library, if the actual .pretty folder were
selected then no folder would be added to the list of libraries.
This led to an assert when normalizing paths, and the library
not being added.
Add also a comment in common.cpp about using wxLocale instead of setlocale.
DIALOG_UPDATE_FIELDS has issues in non English languages, due to its design.
The fix for mandatory fields is only a partial fix that avoid major issues.
The immediate action option clears (or not) the position of the events.
We use this to determine if the command should start at the given
position or merely activate the tool. This was being checked in the
menu options, which only activated for tool commands in the context
menu. Moving to the process event, we catch hotkeys as well.
This also restores the previous logic in eeschema that used a static
variable for storing wires rather than the private class variable.
Starting the draw event now picks up from the existing wires when
activated in immediate mode.
Fixes#3891 | https://gitlab.com/kicad/code/kicad/issues/3891
Previously we call only setlocale( xx, "C" ), but it was not enough on Windows.
Now we call wxLocale("C")
wxLocale calls setlocale, but also make some others initialization in wxWidgets.
It fixes some issues related to comma versus point as fp separator.
Especially wxWidgets warnings are no longer thrown, and a one case of incorrect
conversion is fixed.
The combination of left over test code in lib_id.h/cpp and the changes
to handle the DEBUG compiler flag correctly on all platforms exposed a
swig issue on debug builds. Removing the offending test from lib_id.h
resolved the issue.
ADDED: Back annotation algorithm,
eeschema back annotation dialog
CHANGED: added some minor helper methods to SCH_REFERENCE_LIST and SCH_REFERENCE,
split SCH_REFERENCE_LIST::CheckAnnotation on 2 parts to reuse code
Use the proper encoding to prevent extraneous conversion encoding conversion inside UnescapeString(). This change reduces the eeschema symbol library loading time (ubuntu and windows build) from 2700ms to 1700ms.
See merge request https://gitlab.com/kicad/code/kicad/merge_requests/70
This also removes vector cover types which do nothing except obfuscate
the underlying implementation.
Mainly changes SCH_SHEET_PINS and CONFIG_PARAM_ARRAY (which will soon
be replaced by Jon's new stuff).
When printing (using DC context) the bitmap will clear the full screen
unless the clipping region is set to the image itself.
Addresses KSC ticket 126
Fixes#1877 | https://gitlab.com/kicad/code/kicad/issues/1877
Bitmaps scale internally to 100nm instead of 1mil. There is a better
way to do this but I think we'll be adjusting it again when Cairo
printing in finished.
It served us (mostly) well for more than a decade. It helped KiCad grow
before the std:: came into decent shape or speed. It was a good little
list.
RIP DLIST 2008-2020
This moves EESchema DLIST structures to rtree. These changes are more
fundamental than the pcbnew changes from 9163ac543888c01d11d1877d7c1
and 961b22d60 as eeschema operations were more dependent on passing
drawing list references around with SCH_ITEM* objects.
The old methods were very clunky and not recommended (and didn't
properly cast the function types). This changes to useing the
recommended way of declaring events and casting the event handlers.
For legacy reasons, it stored left and right "spin" as flipped integers in the file format.
But the code handled the flip in multiple locations rather than just doing it on file io.
This change unifies the internal code and does the mapping in the file I/O.
ADD: Allow drawing of current and phase traces with dotted style
for easier differentiation from voltage and magnitude. The option
is available in the View menu of the simulator.
* Split up the thirdparty code into the thirdparty folder (#3637)
* Create a new kimath static library containing all the math functions
This is part of cleaning the build system for #1906.
Property is a pad info used mainly for fabrication or test.
Currently, supported properties are:
BGA property (variant of SMD pad)
Fiducial (global to the board or local to the footprint)
Test Point
Heat sink
Castellated.
And are used in Gerber files (copper layers and drill files)
Increment BOARD_FILE_VERSION to 20200104
102b5301 introduced an issue on GTK where the column width was
incorrect when read, then was set incorrectly (a known problem
on GTK tree views). We should only apply that fix on OSX.
Fixes https://gitlab.com/kicad/code/kicad/issues/3720
Quasi H or V segments are segments having the same x value or y value
(with a + or -1 max diff) for end points coordinates.
The change is a workaround, not really a fix.
Fixes#3711https://gitlab.com/kicad/code/kicad/issues/3711
Create an IsContentModified() function in each frame
that provides if the content has been modified, and
use that instead of always copying the checks.
CHANGED: Update the Linux appdata file to include new tags
* Include version tags (and others) in the appdata file
* Refactor the version string generation to clean it up
They are now in a specific block and no longer combined with an other command.
(combining these commands with an other command (D01 or D02) is deprecated)
Fixes#3677 | https://gitlab.com/kicad/code/kicad/issues/3677
Use wxMessageDialog instead of wxRichMessageDialog in DisplayErrorMessage
so the platform specific message dialog is used. wxRichMessageDialog
looks different than the stock message dialog on every platform so only
use it when a checkbox is required.
This is the first step to allowing non-segments in the line chain.
External routines cannot be allowed to change the line chain without
going through the internal routines. To accomplish this, we remove the
Vertex() and Point() access routines and only leave the const versions.
Transformations are given for both points as well as the chain itself.
This change completely removes the LIB_ALIAS design pattern an replaces
it by allowing LIB_PART objects to inherit from other LIB_PART objects.
The initial implementation only allows for single inheritance and only
supports the mandatory fields in the derived part because that is all
that the current symbol library file format will support. Once the new
file format is implemented and saving to the old file format is deprecated,
more complex inheritance will be added. The LIB_ALIAS information saved
in the document files was move into the LIB_PART object. This change
impacts virtually every part of the schematic and symbol library editor
code so this commit message is woefully incomplete.
REMOVE: Removed the symbol aliases concept from the schematic and symbol
editors and the symbol viewer.
NEW: Replace the symbol alias concept with simple inheritance that allows
a library symbol to be derived from another library symbol.
Ratsnest did not need a reserve and then iterative emplace. Instead, we
use resize(). Stroke font gets private vars initialized and kiway
variables that are only used in debug builds are properly scoped for
releases as well
Calling resize(size()) will only zero out elements that exist above the
vector size(). The memory is not freed in this case. shrink_to_fit()
will accomplish this action (at the discretion of the library)
This update replaces the existing uses of unique pointer creation with
the C++14 std::make_unique call that provides proper memory release in
event of an exception.
The crash is inside wxDynamicLibrary::Load() when loading Eeschema,
and hard to find on Windows (gdb shows nothing).
Perhaps due to some issue with a specific string.
The fix is to switch to "C" locale with LC_COLLATE option to load the dll.
Fixes: lp:1853681
https://bugs.launchpad.net/kicad/+bug/1853681
Mainly because it creates a new keyword a new keyword in *.kicad_pcb files,
and needs some tests, this is currently a advanced feature.
Enable it by adding "UsePinFunction=1" in "kicad_advanced" config file.
Note also "UsePinFunction=1" only enable saving this info in *.kicad_pcb
and kicad_mod files.
The pin name defined in Eeschema is now available as pad info.
Useful for the board designer (the pin function is displayed in the message panel).
Needed for the Gerber P&P files.
Remove not used files:
- markdown2html is not used (we are using "Sundown" tool)
- newstroke_font_without_CJK.cpp is removed.
Due to code optimization the full font works fine without memory issues
-fix also a few very minor compil warnings
Ensure we iterate over all the sub directories and files inside of them
when deleting a directory from the project tree.
Fixes: lp:1852357
* https://bugs.launchpad.net/kicad/+bug/1852357
Handle symbols as well as strings in the "source" lists of
netlist files.
Handle Protex gerber file extensions.
Check for project_name-whatever pattern for files that we
don't recognize (such as project_name-NPTH-drl_map.ps)
Previously, the build version would only update if the dialog_about.cpp
file were modified. This moves the date generation into the same file
as the build version, so it will be updated whenever a new version
is made.
Mainly replacing std::string by wxString to manage filenames.
On Windows, a sdt::string cannot manage a filename, unless using
in many places TO_UTF8 and FROM_UTF8.
So the best way is to use a wxString for filenames and error messages.
Don't accidentally flip the x-axis glyph size when resetting after
a sub- or superscript.
Special-case three tildes in a row. (We could also do this for
sub- and superscript, but does anyone really need a superscript
^ or a subscript?
Fixes: lp:1851657
* https://bugs.launchpad.net/kicad/+bug/1851657
Fixes: lp:1851880
* https://bugs.launchpad.net/kicad/+bug/1851880
Note that since the markup might exist for other reasons, it has
to be turned on with a preference setting. (It goes through a set
of bitflags so the same architecture can be used for other markup
structures that we might want to support in the future.)
Note also that this is more about engineering nomenclature than
visual formatting. In that respect it's more similar to overbar
than italic or bold.
RS274X Gerber files using only regions (polygons) can be valid, and are not old RS274D files
Now a warning is raised only if there are some missing D codes definitions
(RS274D file or broken RS274X file)
Remove unused var and add comments
Fixes: lp:1850821
https://bugs.launchpad.net/kicad/+bug/1850821
We have forbidden lists maintained in 3 separate locations. This causes
a bit of confusion as to which is correct.
This makes the list uniform but remains to place the character set in a
single location.
The constrained draw was constraining the polygon size to fit the
existing points rather than extending the existing points to fit the
user's intent.
This adds a 90° double-joint for the completion polygon that allows the
user to complete common constrained polygons visually based on the
preview with a double-click to finish.
Changing common settings in EDA_BASE_FRAME may segfault for frames that
don't implement tool manager yet (simulator)
Fixes: lp:1849492
* https://bugs.launchpad.net/kicad/+bug/1849492
deque structures have higher overhead than vectors. Not usually
problematic, but with hundreds of thousands of characters each with only
a few strokes, the overhead becomes dominant.
Therefore, for some footprints, the right footprint was not associated to the component.
The hash calculation was using a XOR to combine 2 sub hash values.
This is not a strong way to combine these hash values.
They are now added. Looks better to identify similar and different footprints.
Fixes: lp:1847575
https://bugs.launchpad.net/kicad/+bug/1847575
It allow using the previous font set without CJK.
The new font (with CJK) is very large (10x), and can create (on Opengl) out of memory issues
with some graphic cards.
* Fix wildcard display in the file selector dialog (on GTK
it would show the regex to the user)
* Move the file extension comparison into a common function
* Make the events generated by the selection of context menu items
have the position where the menu was opened
* Ensure that TC_COMMAND type events have their position set to
be the cursor position where the event originated
Standard apertures are circle, rect, oblong and polygon (regular polygonal shapes with 3 to 12 vertices)
The support of the standard aperture type polygon was missing in Gerber plotter.
The help file bridget_tee_formula.md can be displayed in pcb_calculator.
For Help messages, a markdown text (with some basic html tags) is often enough
and is more easy to translate than full html texts.
Previously, a 600 DPI was used to set device scale (can create minor visible rounding issues).
Using now 4800 DPI to reduce these rounding artifacts.
Fixes: lp:1845229
https://bugs.launchpad.net/kicad/+bug/1845229
* Move column width manipulation into the lib tree adapter
* Fix issue with GTK where if someone types too fast, the part
column gets 0 width.
Fixes: lp:1841584
* https://bugs.launchpad.net/kicad/+bug/1841584
The OnKillFocus handler of the UNIT_BINDER replaces the text in the
control with the evaluated string, which removes the selection. To
get the original text on the primary selection clipboard, we must
add it ourselves.
Fixes: lp:1794623
* https://bugs.launchpad.net/kicad/+bug/1794623
Use the HTML_MESSAGE_BOX window to present the warning messages rather
than wxMessageBox which would overflow the display when there were a lot
of graphic items that could not be parsed.
Fixes lp:1839565
https://bugs.launchpad.net/kicad/+bug/1839565
The INT_MAX limit for most elements makes sense only for single-segment,
straight line elements. For elements that accumulate lengths, we should
utilize the long long int (64 bits) to allow for greater lengths.
Fixes: lp:1842367
* https://bugs.launchpad.net/kicad/+bug/1842367
We use DIALOG_SHIM to display many items that should behave more like
frames with the ability to min/max/resize. This changes the default
custom dialog behavior to the frame-type.
Fixes: lp:1829950
* https://bugs.launchpad.net/kicad/+bug/1829950
The thumb size changes between system versions and (on GTK) render
managers, so hard-coded wasn't working. This gets the actual value from
the system and uses to adjust the range. Changes in the range can also
trigger the refresh.
Fixes: lp:1822617
* https://bugs.launchpad.net/kicad/+bug/1822617
Fixes: lp:1816749
* https://bugs.launchpad.net/kicad/+bug/1816749
They're now used for bus definition control characters.
Also fixes the sheet pin edit dialog to correctly escape/unescape
netnames.
Fixes: lp:1840834
* https://bugs.launchpad.net/kicad/+bug/1840834
When plotting in Eeschema, various elements may be filled with either
the foreground or background colors. The fill mode is rather unique,
requiring un-stroked pie wedges for arcs and both closed and open filled
polylines.
Fixes: lp:1840769
* https://bugs.launchpad.net/kicad/+bug/1840769
(cherry picked from commit 213547f545)
KiCad is case sensitive but we need to be consistent in displaying sort
order as case insensitive (same as file systems)
Fixes: lp:1836911
* https://bugs.launchpad.net/kicad/+bug/1836911
(cherry picked from commit ebba15fe67)
The base initialization of EDA_RECT sets a 0/0/0/0 rectangle that
prevents merging properly with valid EDA_RECT. This sets the default to
be uninitialized until the internal data are set.
This allows rapid debugging of the coroutine memory issues. It moves
the default stack size to 256 * 4096 = 2^20, which will utilize full
pages on all architectures.
1) don't ASSERT; use exceptions (which can be caught) instead.
2) clean up LIB_LOGGER so it's only used during sync
3) fix typos in wxLogMessage() calls so they produce output.
4) throw on unrecognized token in loadContent().
5) if clipboard can't be pasted as content then paste as text.
Fixes: lp:1840172
* https://bugs.launchpad.net/kicad/+bug/1840172
libcontext currently restores and saves the FPSCR register
on ppc64. This behavior is fine (though unnecessary) on the
ELFv1 ABI which designates the register as volatile, but has
been observed to cause crashes on ELFv2 systems.
The ELFv2 ABI designates the FPSCR register as Limited-access
and specifies specific conditions that must be met to clobber
it. It does not seem that a context swap function meets these
conditions (and indeed, the save/restore register example in the
ABI document does not modify FPSCR).
This patch fixes ELFv2 ABI compliance by removing the FPSCR
save/restore code in libcontext entirely. This fixes observed
crashes on the platform and should have no consequence for
ELFv1 support.
Fixes: lp:1840088
* https://bugs.launchpad.net/kicad/+bug/1840088
* Push a function into CONDITIONAL_MENU that adds the item
* Modify the tooltip for close and exit items to have the
program name
Fixes: lp:1835454
* https://bugs.launchpad.net/kicad/+bug/1835454
KICAD_STDLIB_DEBUG option generate intrusive tests and asserts, and on Windows, generate crashed not captured by GDB.
KICAD_STDLIB_LIGHT_DEBUG generate less intrusive tests and asserts.
it adds only -Wp,-D_GLIBCXX_ASSERTIONS and that generate less asserts.
Add also the new build options in dialog about.
There seems to be a bug with certain GTK setups that prevents the
submenus from getting sized correctly unless the elements are added
when the main menu is displayed.
Fixes: lp:1835460
* https://bugs.launchpad.net/kicad/+bug/1835460
Also rewrites the PCBNew Find dialog to make use of the above, including:
1) searching in user-defined footprint fields
2) searching in pcb text
3) a history list in the search popup
4) case sensitive searching
5) word sensitive searching
6) the ability to turn wildcard searching on/off
7) better placement of the result when the dialog obscures part of the
window
Fixes: lp:1838006
* https://bugs.launchpad.net/kicad/+bug/1838006
This fixes the last suffix that was missed by 168fa09f5. The schematic
backup files should have the suffix .sch-bak to distinguish from
.kicad_pcb-bak or other backups.
(cherry picked from commit b6fe4ff637)
Previously, for instance after modifying preferences or language,
they were rebuilt but the tools state was not set due to a missing call to SyncToolbars() after rebuilding.
- fix an issue when trying to enter a scale < 1.0: such a scale starts by 0, that was rejected by the filter)
- automatic clamp to user scale limits, to avoid many warnings to users.
- if the user scale is out of bounds, warn the user before trying to print, not when opening the dialog.
On wxWidgets 3.1 they are called recursively but not on on wxWidgets 3.0.
We call now TransferDataToWindow and TransferDataFromWindow only once,
but ensure it is called for all pages.
Fixes: lp:1836901
https://bugs.launchpad.net/kicad/+bug/1836901
1) Intermediate states might be self-intersecting, and we shouldn't
be policing our users on what order to do things in
2) The polygon might already be self-intersecting, at which point we're
preventing the user from fixing it.
Also includes better const management for SHAPE_POLY_SET API.
Fixes: lp:1833831
* https://bugs.launchpad.net/kicad/+bug/1833831
m_toolMgr->ProcessEvent() returns false when a ESC key is handled. It should return true.
So we force the handled flag to true for a ESC key event to avoid skipping this event.
Otherwise the ESC key event is handled twice.
At the beginning of tool dispatcher, the ProcessEvent did not return the fact a key event was captured or not.
Now this is the case, and the old char event filtering was no longer correctly working,
and some events were not fired, especially on Windows.
I'm not sure these are necessary but I got a crash when checking one
as a boolean instead of calling is_initialized(). Sadly, my debugger
doesn't like boost, so I didn't get much more info.
For items defined by 2 point, the ending point coordinates are rounded to the near integer,
but the starting point coordinates were just truncated instead of being rounding,
creating sometimes an error for horizontal or vertical lines.
Fixes: lp:1835211
https://bugs.launchpad.net/kicad/+bug/1835211
This changes make_lexer() so that it no longer generates a custom target
but instead attaches the generated files to an existing one (so the first
argument now is the name of an existing library or executable, and it needs
to come after the add_library/add_executable call).
The generated source is no longer listed in the project sources, as it is
added by the function. The files are generated in the build tree rather
than the source tree, and the directory is added to the include path for
the respective project as well as exported to projects linking against it.
Generated files in subdirectories are somewhat supported, but need to be
referenced with the same name as they were generated (i.e. including the
subdirectory name).
Fixes: lp:1831643
* https://bugs.launchpad.net/kicad/+bug/1831643
Fixes: lp:1832357
* https://bugs.launchpad.net/kicad/+bug/1832357
Fixes: lp:1833851
* https://bugs.launchpad.net/kicad/+bug/1833851
Includes the addition of an onSetCursor() handler which must be called
from both the GAL canvas AND the GAL backend (at least on OSX) to prevent
cursor flickering between (for instance) pencil and arrow.
Also includes new architecture for point editors which allows them to
coordiate cursors with the editing tools (so we can switch to an arrow
when over a point).
We were running into various corner conditions where a tool's event
loop would exit while the tool was still active, or the tool would
get popped while we were still in the event loop. (A lot of these
had to do with the POINT_EDITOR's, but not all of them.)
The new architecture:
1) tools always do a Push()/Pop()
2) everyone is responsible for their own pops; no more stack-clearing
on a cancel
3) CancelInteractive events go to all tools to facilitate (2)
In .gbrjob file, one can specify the thickness and color of some layers.
Currently, there is no way to enter these parameters.
This commit prepare a better support of .gbrjob files.
While wxWidgets has Navigate() and NavigateIn(), they're not compiled
on GTK because it supposedly has native TAB control. Of course its
native TAB control won't get you out of a grid, so that leaves us in
a bit of a pinch. This implements a poor-man's Navigate() which will
at least get us out of the grid.
Fixes: lp:1810569
* https://bugs.launchpad.net/kicad/+bug/1810569
It was calculating the bounding box twice (and failing to honour
the accuracy parameter on the bounding box test).
Worse, constructing the bounding box is about the same speed as
the rigorous test, so it never improves things.
Oblong holes (slots) use now a aperture attribute similar to round holes.
(The previous attribute "slot" is now deprecated)
However they have a specific aperture, and a comment is added in drill files for these apertures.
In singletop mode, all frames show the "Quit" option in the file menu
and will quit on Ctrl-Q. When launched from the main KiCad interface,
sub-programs show the "Close" option instead and will close with Ctrl-W.
In this mode, Ctrl-Q will instruct the main program to exit.
Fixes: lp:1779938
* https://bugs.launchpad.net/kicad/+bug/1779938
A few files snuck in with CRLF for the line endings. These make it hard
to look at diffs as every line appears to have changed. This commit
makes only line ending changes, so can be ignored
Now that our tool framework handles the hotkeys, we need to skip the
passed handling work-around for actions that are already handled in the
event.
Fixes: lp:1832604
* https://bugs.launchpad.net/kicad/+bug/1832604
Use the wxTextValidator style flag to allow the user to clear the library
identifier string. Use wxTextValidator::SetStyle( wxFILTER_EMPTY ) to
prevent empty library identifier strings which is the current behavior.
This handles images with transparent colors by mapping the transparent
color to white. This only works when plotted into the background.
(cherry picked from commit b32439a694)
Also changes the presentation of the string when the checkbox appears
so that the "Changes will be lost" warning isn't hidden by the turndown.
This last part may require conditional compilation as it's undocumented.
Lastly, regularizes the Unsaved Changes strings between the apps.
Especially, small round rect pads have a ugly shape because the number of segments is
small and the 90 deg arcs are not very well approximated.
The minimal seg count for 90 deg arcs is now 4 (16 segm/circle) for pads.
Fixes: lp:1833005
https://bugs.launchpad.net/kicad/+bug/1833005
It's a bit of a hack because they're statically initialized and
so we can't make use of the _() macro. We do still want it in the
code, however, because the string harvesting is based off of it.
Fixes: lp:1833000
* https://bugs.launchpad.net/kicad/+bug/1833000
DIALOG_EXIT was not being laid out correctly after setting the dialog
message. Rather than fix our custom DIALOG_EXIT, wxMessageDialog and
wxRichMessageDialog were substituted as direct replacements for all
of the variants of DIALOG_EXIT. This make message dialogs appear more
consistent because wxMessageDialog uses the default platform message
dialog and wxRichMessageDialog uses the default platform rich message
dialog on windows.
Remove DIALOG_EXIT_BASE as it is no longer required.
Fixes lp:1832899
https://bugs.launchpad.net/kicad/+bug/1832899
If a tool called something like clearSelection while processing a
MOUSE_CLICK, the SELECTION_TOOL will pass the clearSelection
COMMAND_EVENT because it handles it as a transition, not as an
event. Because m_passEvent is effectively global, the tool manager
would then interpret that as passing the MOUSE_CLICK and we'd end
up processing the click by multiple tools.
Re-arranging the stack will invalidate the iterator that is removed and
inserted (begin()). Because this is not a threaded operation, we can
only do it to ourselves, so check that the operation isn't a NOP before
performing.
Fixes: lp:1832930
* https://bugs.launchpad.net/kicad/+bug/1832930
Delete the copy ctor and assignment operator to start with, but
even then the separate apps each have their own statically allocated
copy of the common actions. So we need to update all of them, which
also means having the kicad manager frame's set of actions on hand).
This changelist also adds a Clear Hotkey Assignment function since
the hotkeys set is now likely to be sparse with respect to the
actions.
eeschema cpp files consume generated header files that have targets in
the common directory, so no dependencies get created from eeschema. We
add the dependencies in common to force the setting through libraries.
Fixes: lp:1831643
* https://bugs.launchpad.net/kicad/+bug/1831643
* rename WS_DRAW_ITEM_POLYGON to WS_DRAW_ITEM_POLYPOLYGONS (better name)
* use SHAPE_POLY_SET instead of std::vector(<wxPoint> to manage the set of polygons.
It also remove duplicate code related to HitTest and bounding box.
* fix HitTest and WS_DRAW_ITEM_POLYGON highlight.
These options were used to support the legacy canvas when drawing on
MacOS and GTK3. With the move to 100% GAL, they are extraneous. This
moves all DC over to "COPY" as we only use this for printing support in
Eeschema at the moment, so there is a single draw command (no erasing)
for the canvas.
When we assign a string to the wxFilename, it takes the last section as
the filename (unless there is a trailing '/'). So on Linux, we got
/home/user for the Documents dir and /home/ was the directory while
'user' was the filename. Appending directories 'kicad/templates' made
the final directory '/home/kicad/templates'. Forcing this to be a
directory restores correct behavior.
(cherry picked from commit 0ee38653f7)
Two issues:
* Unassigned hotkeys were being passed to WX in the menu strings as
"<unassigned>". WX doesn't recognise this, and prints debug each time.
Unassigned hotkeys are no longer rare or naughty, so we shouldn't provoke
debug spew. Suppress by not appending hotkey strings for actions with 0
(i.e. unassigned) hotkey IDs.
* The zone cutout tool uses GR_KB_SHIFT, not MD_SHIFT. This causes
"unknown hotkey" spew from WX.
Return the EDA_DRAW_FRAME class back to common, whence it came (before it was
duplicated into legacy_wx and legacy_gal). Now there is only one
implementation (the GAL one), it doesn't need to be in a separate library.
This simplifies the dependencies for common lib users.
This mixes the de-emphasized layers into the background color rather
than merely a black color. This also keeps some of the original layer
color.
Fixes: lp:1831316
* https://bugs.launchpad.net/kicad/+bug/1831316
It was due to a angle normalization between -360 and 360 degrees.
So, in arcs, if the start angle and end angle diff is n*360 deg,
this normalization gives start angle = end angle.
The fix forces end angle = start angle+360deg in this case.
Fixes: lp:1832096
https://bugs.launchpad.net/kicad/+bug/1832096
We prevent the creation of invalid polygons by keeping the converging
lines from intersecting. This test doesn't make sense for triangular
polygons as they always intersect and we want to allow them to move
outside of the singular point.
Fixes: lp:1831481
* https://bugs.launchpad.net/kicad/+bug/1831481
(cherry picked from commit 966173c129)
Building custom targets that depend on custom commands such as our
keyword lexer requires two layers of indirection to pick up changes
properly and not overwrite the same file in parallel builds.
Fixes: lp:1831643
* https://bugs.launchpad.net/kicad/+bug/1831643
The action menu handler was capturing too many menuitem events.
Only context menuitem highlight events and some popup menu events need to be captured
Any id < 0 (like automatically assigned menuitem id) is no longer captured.
Fixes: lp:1831669
https://bugs.launchpad.net/kicad/+bug/1831669
Due to an interaction with old (<1.59) versions of Boost, the ostream
operator<< for wxPoint and wxSize is requried to use
BOOST_CHECK_EQUAL_COLLECTIONS (the print_log_value<T> function is not
used by this macro until 1.59).
Because these functions are available in Debug builds, unit tests that
use such functions will break when compiled as Release or
RelWithDebugInfo.
The change here is to not disable these functions in Release builds.
Also, the functions are moved to common.h, to go with other generic
WX "polyfill" functions. Although they might be commonly used by the
EDA_ITEM::Show functions, they are not specifically related to that
class.
Fixes: lp:1830612
* https://bugs.launchpad.net/kicad/+bug/1830612
This fixes multiple issues when importing Eagle V6 files.
Crashes occured when arcs of 0-length were found and when parts were
referenced in the schematic that were not found in the library. This
could happen if the library and schematic were different cases.
Fixes: lp:1830564
* https://bugs.launchpad.net/kicad/+bug/1830564
This places the arc approximation setting in the kicad_pcb file and uses
it for all parts of the board rendering where arcs are converted to
segments. This allows the user to customize their speed vs. accuracy
tradeoff. The default setting of maximum error of 0.005mm is acceptable
for small boards on moderate systems.
The source bitmap was copied to the new created item.
However, for Checkable menu-items, when setting a bitmap, our standard check bitmap is also added.
This is unwanted when the source bitmap is the wxNullBitmap (bitmap sizes are different)
The bitmap pointer is not checked at copy construct. This is
an instant segfault if you copy an empty bitmap.
Fix the constructor and remove the expected test failure, from the
previous commit.
This corrects an issue with fill segments-per-circle and moves the error
to segmetns calculation down in a number of functions to expose the
single value for approximation
Sometimes we want to inflate a polygon without adding rounded edges.
This add the option using the jtMiter setting.
This is used in the Eagle parser to expand the Eagle zones for KiCad.
Eagle Zones are drawn on the polygon edge, so they extend out from the
outline. KiCad zones are drawn inside the polygon. We need to both
increase the zone size and decrease the minimum pen width to account for
this.
Fixes: lp:1817312
* https://bugs.launchpad.net/kicad/+bug/1817312
This commit redirected too many menuitem IDs to the tool manager.
Only some context menu items have to be redirected, not all inside ACTION_EVENT events.
This hack is not perfect. It needs a better handling of ACTION_EVENT handling.
This removes the remaining hard-coded segments counts and replaces them
with the relative error calculation where the segments per arc is
determined by the maximum error we allow (smaller arcs = fewer segments)
Add the N/Shift+N hotkeys to the eeschema hotkey file.
Also adjust the COMMON_TOOLS::GridNext/Prev to work when
the screen's grid definitions do not have consecutive command
IDs (they do not in eeschema).
This is related to lp:1811018 (but doesn't constitute a fix).
* https://bugs.launchpad.net/kicad/+bug/1811018
Remove the axis numbering code from ARRAY_OPTIONS
and place in a new class, ARRAY_AXIS. This keeps
the logic for the array item numbering separate from
the logic for the array item geometry.
This simplifies the logic in the ARRAY_OPTIONS class, which
no longer has to deal with the numbering of each axis.
Replace INCREMENTAL_TEXT_CTRL with wxSpinCtrlDouble because it looks
and works better.
Remove INCREMENTAL_TEXT_CTRL header and source files because the only
place they were used was in GAL_OPTIONS_PANEL.
Note that the comment in line 142 where the scale factor was set had the
correct value to indicate metric (1) but in the actual boilerplate, we
set imperial (0). This has been around for 6-8 years, so it would seem
DXF is not our most popular export.
Note, I initially tried to use '1' to specify metric units but this was
not handled by DXF readers (QCAM, Inkscape). Instead, scaling the page
units to inches properly seems to work.
The default is meant to be "Save" but "Discard" was selected due to ID
ordering on creation. Setting the focus before setting the default
makes the "Save" option the highlighted option that can be selected
immediately by pressing enter.
When drawing an arc, show a guide circle that indicates the
radius of the arc at the current cursor. This can be useful
as a guide for seeing where the arc will reach once the radius
is fixed by the second click.
Fixes lp:1796158
* https://bugs.launchpad.net/kicad/+bug/1796158
This is a stop gap fix. It should be possible to use the wxFrame title
string for this but some of the frame windows have appropriated the title
string for configuration file naming purposes which is less than ideal.
Fixes lp:1825977
https://bugs.launchpad.net/kicad/+bug/1825977
Provide a toolkit-agnostic interface for "busy indicators", which
allows the 3D viewer to show a busy cursor, without the canvases
having to to know how a wxCursore works.
The motivation here is to decouple the 3D renderers from the WX
GUI system, as they can then be used when when there is not an
active window (e.g. for offscreen rendering).
Otherwise, attempting to use a wxBusyCursor without a GUI
available is an instant segfault.
Prevent user from pasting text with carriage return and/or line feed
characters in field value edit control in the schematic symbol and symbol
library properties dialogs.
Make all objects derived from GRID_CELL_TEXT_BUTTON use validators
correctly.
Add validators to FIELDS_GRID_TABLE object for field values other than
the mandatory fields.
Create a validator to check that a string is a valid LIB_ID.
Fixes lp:1828214
https://bugs.launchpad.net/kicad/+bug/1828214
This is mainly the solder paste layer that shows this issue.
This is due to the fact SHAPE_POLY_SET::Inflate does not work fine with polygons with linked holes.
SHAPE_POLY_SET::InflateWithLinkedHoles it added to fix this issue.
Fixes: lp:1828287
https://bugs.launchpad.net/kicad/+bug/1828287
Commit e10c01aaf didn't work when touchpad panning was enabled.
This commit changes it to only discard horizontal wheel events
when in "scroll mode" rather than "pan mode".
Based on a patch by Adrian Scripcă <benishor@gmail.com>.
Follow-up to fix: lp:1828080
https://bugs.launchpad.net/kicad/+bug/1828080
Modern mice feature horizontal scrolling capabilities and those end
up being treated by KiCad as regular scroll events causing confusion
among users.
The fix works by discarding the handling of wheel events other than
the ones for the vertical axis.
Fixes: lp:1828080
https://bugs.launchpad.net/kicad/+bug/1828080
Force the symbol library links whenever the symbol library table has been
modified. This will use the cache as a fallback when a library has been
removed that contains links in the schematic rather than display.
Fix the SCH_COMPONENT symbol resolver when falling back to the cache. The
resolver was using the LIB_ID ':' notation which was failing. Replacing
':' with '_' fixed this issue. This was also an issue when generating the
symbol message panel information.
Convert wxLogDebug to wxLogTrace in symbol resolver code path. Add new
trace type KICAD_SYM_RESOLVE.
Fixes lp:1821606
https://bugs.launchpad.net/kicad/+bug/1821606
There is a rendering bug in GTK3, which appears to be
an upstream GTK issue.
This can be worked around by, when filtering, ensuring the
*parent* item of the selected item is visible. This will
not cause the selected item to not be visible, as the selected
item will be the first shown child. So it will be visible, as long
as the list box is greater than a single row high, which it will be
in all practical scenarios.
This is done on all platforms, as it has a beneficial side-effect:
the parent library of the selection is naturally shown to the
user, so they don't need to scroll up to see what library their
current filter selection was in.
Fixes: lp:1804400
* https://bugs.launchpad.net/kicad/+bug/1804400
This allows a const BITMAP_BASE to expose const image
data. This is currently done with const_casts, which is
"OK", only as long as the source image is not declared
const, in which case it's undefined behaviour.
Also immediately dereference the pointer to a reference
if it's not checked to make the non-null requirements
explicit at the point of access.
Both versions of EDA_DRAW_FRAME::isBusy have a useless const_cast.
GetScreen() const returns a non-const SCH_SCREEN already, it doesn't
need to be cast, and it's stored in const SCH_SCREEN anyway.
This is useful when working on code paths that rely on KiWay
communications, since you can run and debug the kicad application
without needing to run an install task first.
In OpenSSL 1.1.0 and newer, the locking callback macros do nothing.
This causes unused warnings for the static function lock_callback.
Ignore this function on newer OpenSSL builds, but keep
the infrastructure for now.
When OpenSSL's min version is 1.1 or greater, all the locking
infrastructure can be removed.
Prevent a divide-by-zero bug in SHAPE_ARC::ConvertToPolyline.
When the radius is zero, just use the initial angle (it makes
no different anyway, the result is the centre point, which is
the start point.
The wire image undo/redo option required special handling and was only
used in a single location. Replacing with single change handling
reduces the code complexity
Move repeated GAL config reading routines into GAL_DISPLAY_OPTIONS.
THe app-level config is in here already, do the same for the
common config.
This means that the configs are loaded consistently, which fixes
the symbol-chooser preview window, which previously didn't use the
same config routine as other GAL canvases.
Future work could move these functions to free functions that
act on the public interface of GAL_DISPLAY_OPTIONS to avoid
GAL_DISPLAY_OPTIONS having to know about wxConfig and wxWindow.
Fixes: lp:1824524
* https://bugs.launchpad.net/kicad/+bug/1824524
Hash collisions reduce the speed of unordered maps by increasing the
comparison time of underlying values. This implements the inverse
golden ration offset into the x value to ensure that consecutive points
are far from each other in the map.
This allows setting the config dir at build time, providing packagers a
method of controlling where the configuration files are placed.
Fixes: lp:1780601
* https://bugs.launchpad.net/kicad/+bug/1780601
On some platforms like MSVC, NaN prints as "-nan(ind)". This
is a bit needlessly ugly, so print "NaN" on all platforms
consistently.
This fixes a test failure on MSVC.
This allows us to make the various netlist and pcb update routines
more atomic and less reliant on carefully sequenced asynchronous
messages.
This is also a prelude to adding support for footprint testing
without a netlist.
Both Cairo and OpenGL had issues (different, though) with circles that are
thicker in line width than they have radius. This corrects the OpenGL
implementation (radius is calculated to the outer edge) as well as Cairo
(line width needs to be clamped to twice the radius)
Fixes: lp:1822765
* https://bugs.launchpad.net/kicad/+bug/1822765
Statically constructing wxCursors as used for the probe
and tune cursors crashes the qa_eagle_plugin test
instantly.
Fix this by introducing a new class CURSOR_STORE,
which allows to abstract the platform wierdness of wxCursors
and allow the simulator to laziliy init its own cursors
at runtime.
This code isn't properly tested, as these cursors are never
actually used. However, it does allow the eeschema unit test
to run.
Fixes: lp:1781191
* https://bugs.launchpad.net/kicad/+bug/1781191
Bus upgrades: core new connectivity code
Bus upgrades: eeschema integration and modifications
Bus upgrades: eeschema dialogs
Bus upgrades: netlist export
Bus upgrades: file format changes
the filled areas can use a hatch pattern (crossing lines) using square holes.
The zone filler removes too small holes (truncated holes) from hatch pattern.
It avoid to create small holes when a hole pattern is truncated by the filled area base shape.
Introduced by 416e64a334. The code
appears to have been stepped on purpose but this would be incorrect for
most applications. There remains a good deal of cleanup in mathplot
available for the motivated dev.
Fixes: lp:1810311
* https://bugs.launchpad.net/kicad/+bug/1810311
wxPlatformInfo::Get() causes a linker error on Msys2.
Fix this by making common link wx explicitly, rather
than implicity via it's dependencies, which cause
wrong-order linker command lines on windows.
First, add automatic detection of toolkit DPI scaling options. For now, this
is, in order,
* Check the GDK_SCALE option under GTK+ (users can set this to force the scaling)
* Check the value from WX's GetContentScalingFactor(). This will start to work
correctly from WX 3.1 and GTK+ 3.10.
Then, add a user-settable override in the main prefs panel, next to the icon
scaling. This is independent of the icon scaling options.
DPI handling is performed in a standalone class, so they can be shared between
the prefs UI and the OpenGL backend easily. Also means Cairo could use the same
interface in future.
Also adjust the OpenGL grid drawing code to use the computed scale factor,
which avoids over-thick grids in scaled environments (the user can manually
thicken the grid if wanted).
Fixes: lp:1797308
* https://bugs.launchpad.net/kicad/+bug/1797308
Autosave was not working correctly, partly due to different
implementations in eeschema and pcbnew and partly due to a mistaken
refactor at some point during v5 development. This unifies the expected
autosave prefix to _autosave- for both pcbnew and eeschema. It also
unifies the expected suffix for the backup files to -bak.
Fixes: lp:1820433
* https://bugs.launchpad.net/kicad/+bug/1820433
Allows 0 to 4 chamfered corners, not only one.
A custom shape allow this kind of shape. However because it is a primitive,
it is easier to edit and it support thermal reliefs.
Disable the text update event for the orientation cutom value field before
updating it when the radio buttons are selected. This allows to use the
conventional EVT_TEXT handler, rather than KEYDOWN, which has two effects:
* Tabbing though the dialog no longer sets custom orientation
* Click-driven clipboard actions trigger the update correctly.
Introduce a helper function in validators.h to assist in updating
validated fields without triggering further events.
Fixes: lp:1819006
* https://bugs.launchpad.net/kicad/+bug/1819006
wxWidgets has several bugs that result in cell editors being closed
right after they're opened. There are two wxWidgets hacks to
partially address this: the SetInSetFocus() hack, and a slow-click
hack. We used to try and work-around these bugs ourselves for
single-click access, but this changelist moves those over to
wxWidget's slow-click hack.
Fixes: lp:1817965
* https://bugs.launchpad.net/kicad/+bug/1817965
The folder button handler works will for footprint libraries but we
needed a specific class for the schematic libraries as well.
Fixes: lp:1818346
* https://bugs.launchpad.net/kicad/+bug/1818346
Added checks to StrCmpNum() function in common/sting.cpp to prevent
iterating past the end of the sting. Also removed length of string
parameter since it did not seem to be used anywhere.
Fixes lp:1818157
https://bugs.launchpad.net/kicad/+bug/1818157
The cancel action was set for the escape key when editing the fields in
a dialog. But when the action is a button, we need to ensure that the
escape id is set to ANY for processing.
Fixes: lp:1818056
* https://bugs.launchpad.net/kicad/+bug/1818056
For unknown reasons, GTK3 may send resize events when editing grid
fields. This can cause the grid editor to exit, losing the focus and
overwritting the characters at the next input.
We avoid this by filtering the size events when the size doesn't change.
Fixes: lp:1817810
* https://bugs.launchpad.net/kicad/+bug/1817810
Wayland is not yet compatible with wxWidgets (or rather the other way
around). Until this happens, we must force the x11 compositor while
running. Under wayland, this will map to the wayland-x11 compatibility
layer.
Fixes: lp:1816637
* https://bugs.launchpad.net/kicad/+bug/1816637
For BUTTON_ROW_PANEL::BTN_DEF_LIST, the button definition does not need to be
passed by value, by non-const reference avoids copies and this addresses the
Coverity warnings: 184130, 184134, 184140, 184167.
Also use a unique_ptr to clarify ownership sementics when handing widget
over to WX.
In Symbol editor, axis are always shown. However after switching the backend, axis were no longer drawn.
In Cairo engine, fix a bug preventing axis to be shown.
Each dot is an integer number of pixels wide, so supporting 0.5 width
steps no longer makes sense. We round up the existing settings to the
nearest integer and only allow integers in the dialog.
Fixes: lp:1816748
* https://bugs.launchpad.net/kicad/+bug/1816748
Introduce a shortcut method to set tab ordering and use it in
the dialogs that override the tab traversal orders:
* Eeschema sheet properties
* Pcbnew Move exact
* Pcbnew Move relative
Also set some initial focus fields in the same dialogs.
Tidy a few includes.
Fixes: lp:1816009
* https://bugs.launchpad.net/kicad/+bug/1816009
We shouldn't adjust the pixel size of the grid based on alignment in
GAL. This creates artifacts on the screen at different zoom levels.
The pixel width is fixed by grid size preference
Also clean a left-over debug statement
Fixes: lp:1817377
* https://bugs.launchpad.net/kicad/+bug/1817377
A only one char is very hard to translate outside a context, so avoid to use it.
Remove also 2 "FIX ME" lines, now useless.
Fixes: lp:1817354
https://bugs.launchpad.net/kicad/+bug/1817354
Arc pixel adjustment needs to be limited to +/-1 pixel. But making this
adjustment to nearby points and then using the projection to correct the
center point accumulates errors that are large for angles near 0 and
near 360. This is a compromise that aligns _most_ arcs and provides
stable generation for all angles.
Fixes: lp:1817226
* https://bugs.launchpad.net/kicad/+bug/1817226
GTK3 provides for additional input devices via xinput2. These include
touchscreens and continuous scroll devices. But wxWidgets does not have
specialized handlers for these events, so they double up for some
devices. Until wxWidgets allows us to handle these events, we specify
that the input handler should be the old-style GDK_CORE.
GTK3 does a fade in/fade out routine for scrollbars by default. This
was problematic as it caused a cascade of full-screen repaint events on
each mouse event. Instead of disabling scrollbars (which only helped
the full canvas), we force the old scrollbar behavior is environmental
variables.
Revert "gtk3: Remove scrollbars"
This reverts commit db43bd82a7.
And filled but we don't use those yet. No pixel-alignment needed for
stroked semi-circles (I think) as we set the pixel width to be 1
regardless of the zoom level.
Fixes: lp:1816263
* https://bugs.launchpad.net/kicad/+bug/1816263
Pixel alignment is not required for track outline mode. It creates
differences between segment and radius calculations.
Also add specific width of the outlines
This creates early asserts for issues where we haven't fully implemented
a Clone() function for items or haven't correctly filtered them before
creating the undo/redo commit.
gal: pixel alignment for Cairo.
gal: pixel alignment for OpenGL
Cleanup of pixel alignment patches
gal/opengl: more pixel alignment patches:
- works on Retina displays now
- pixel alignment for circles
- correct 1-pixel strokes
- fixed unfinished 1-pixel line ends
GAL: Restore antialiasing options in Cairo
GAL: Fix arc drawing
Removes DrawArcSegment, which drew arcs whose edge was optionally
stroked (a feature that we did not use). Fixes Cairo arc drawing issue
where arcs were not visible in pcbnew.
gal: further cleanup
gal: removed unused shader parameter
The indent size was estimated by the width of characters. But MSW
indent is substantially different from OSX and Linux. It also cuts off
the middle characters rather than the end leading to poor display if the
width does not fit. This uses the system setting for indent to account
for the indent spacing + 'M' to account for the arrow inset.
Fixes: lp:1815401
* https://bugs.launchpad.net/kicad/+bug/1815401
When filtering, we update the width of the displayed column to ensure
the full text is visible to the user. Check is rough, based on line
width (doesn't completely account for differing char widths) but is
sufficient for the approximate difference
Fixes: lp:1815401
* https://bugs.launchpad.net/kicad/+bug/1815401
Fixes: lp:1788495
* https://bugs.launchpad.net/kicad/+bug/1788495
This was previously "svg:g", but the SVG is declared with only
a "default" namespace, not an "svg:" namespace (looks like
xmlns:svg="http://www.w3.org/2000/svg" in the svg tag).
This means you cannot use svg: as a NS in the document. It's not
needed anywaY: the default is already correct.
Moreover, mismatching <svg:g> and </g> is always invalid.
When adding colors to length tuner, we depend on the window background
color, which can be set by the user, resulting in an unreadable text.
This uses the HSL conversion to detect which shade it should use for the
coloring.
Also adds test cases for round-trip HSL and HSV conversion
Fixes: lp:1814530
* https://bugs.launchpad.net/kicad/+bug/1814530
Apparently FinishDialogSettings() does need to be called on windows to
get the dialog to layout properly. Hopefully this doesn't break any of
the other platforms.
Fix wxGrid column minimal widths on Windows in dialogs (just fixing the size is not enough).
WX_GRID::GetVisibleWidth(): make width bigger for labels, because they usually use a bold font.
(However, the fix is just a workaround: a better code is welcome)
When loading a part in libedit, also transfer certain screen
settings to the incoming SCH_SCREEN, from the current
SCH_SCREEN.
Currently, the grid settings are transferred, but this could
also do other settings if needed.
Also remove some duplicate commentary and mention why the
grid is set in a SCH_SCREEN even though the BASE_SCREEN ctor
sets the same default.
Fixes: lp:1815108
* https://bugs.launchpad.net/kicad/+bug/1815108
Some basic tests on LIB_TABLE and LIB_TABLE_ROW that demonstrate
the behaviour of fallbacks and various access methods.
Also add a few LIB_TABLE_BASE comments and changed some NULLs to
nullptr.
Libpolygon can provide its own includes via target_include_dirs PUBLIC.
This means any linking targets do not need to specifiy them manually.
As common requires polygon, the polygon dep is also now no longer
required downstream of libcommon, as it's transisitvely implied
by libcommon's target_link_libraries.
This resolves a circular dependency previously detected and also
simplifies CMakeLists.
The bitmap definitions (BITMAP_DEF and so on) do not
have any dependencies on other libs, including WX. This
means the bitmaps library can be isolated from the other
dependencies.
Common now depends on bitmaps, and libraries that depend
on common can pick it up from the common target_link_libraries,
as it is PUBLIC. This means a lot of targets no longer
need manual bitmap linkage.
This avoids a circular dependency that was previously reported
by static analysis.
Avoiding pulling in WX and other headers into the include
tree of each bitmap .cpp is a huge speed up (around 10x) in
compilation, and the generated static library is also 10x
smaller (20MB vs 200MB)
Add common as a link library to pnsrouter,connectivity.
THese library do still use common code (including bitmaps,
via base_screen.h) and this allows them to pick up the libcommon
includes correctly.
When the user cancels the footprint load, we should assume they are
canceling the placement of a new footprint. This also adds sanity check
when populating the list
Fixes: lp:1814181
* https://bugs.launchpad.net/kicad/+bug/1814181
Uses existing grouping in SVG output. Sets schematic components as a
grouped element in SVG as well as pcbnew elements per layer.
Fixes: lp:1011754
* https://bugs.launchpad.net/kicad/+bug/1011754
This function was incorrectly processing refdeses like "U1000".
Change the algorithm to a simpler STL-compatible one and
update the tests.
Fixes: lp:1813669
* https://bugs.launchpad.net/kicad/+bug/1813669
This breaks the following functions out to a general-purposed refdes utils
header:
* MODULE::GetReferencePrefix()
* kicad_string.h RefDesStringCompare()
This acheives:
* Slimming of MODULE interface
* Placement of refdes code in common rather than pcbnew
** Testing of this code in qa_common
* Tighter and smaller includes for code that only needed refdes functions
Note: there are failing tests commited (as expected failures). These
are the cause of lp:1813669 and will be fixed as a follow-up commit.
This is not logic specific to MODULE. Breaking it out to
kicad_string.h acheives:
* Slimming of the MODULE interface
* Enables reuse of the function
* Enables testing of the function
Also add a test under qa_common for this function.
The CONFIG_SAVE_RESTORE_WINDOW class does not need to be tied
to the array dialog, put it in common/widgets.
Also do a refactor and tidy-up of the the class, use a union for (slightly)
better type-safety and syntax (a variant would be better but that's C++17).
Also enable integral field save/restore from text boxes.
The geometry and numbering logic is separate to the dialog, and
can be separated for clearer logic and better testability.
Moreover, refactor it to avoid any dependency on pcbnew
classes, so it can be move to common for potential re-use in
eeschema and friends in future.
Also convert all wxPoint logic in these classes to VECTOR2I and
fix some function visibilities.
Add some unit tests of the ARRAY_OPTIONS geometry and numbering.
In the event that we do not have a project configuration file, the
default template will be used. But it needs a destination filename for
copy_pro_file_template().
Fixes: lp:1745022
* https://bugs.launchpad.net/kicad/+bug/1745022
When no default library tables are found, set the default wxFilePickerCtrl
to the users configuration path instead of the current project path to
prevent any project library tables from being used as the default.
Fixes lp:1809769
https://bugs.launchpad.net/kicad/+bug/1809769
If user hotkeys do not map all available actions, we still want the most
recent change to be the primary value. This can happen if the defaults
load a set of hotkeys that are not completely overwritten by the updated
hotkey preferences file. We assume that the most recent hotkey is what
the user want to map.
Fixes: lp:1778408
* https://bugs.launchpad.net/kicad/+bug/1778408
Some MSW seem to have issues with the UTF-8 characters in const
wxString. This explictly casts to wxString from UTF-8 handling the
platform differences
Fixes: lp:1813329
* https://bugs.launchpad.net/kicad/+bug/1813329
Introduce the concept of a DRC_PROVIDER which allows
to separate the various DRC functions to their own
areas. This allows, amongst other things, a slimmer core
DRC class, and allows DRC functions to be separately testable.
The courtyard DRCs (overlap, missing and malformed)
are the first victims, so instrumentation can be added to this function.
Add some unit tests on this DRC function, as well a few re-usable PCB-based
utility functions in a library (qa_pcbnew_utils) that could be shared between
unit tests and other utilities.
When creating the zone cutout, we delete the old zone and add a new one
with each cutout. This requires resetting the source zone and clearing
our previous selection if we would like to continue using the cutout
tool on the new zone.
Fixes: lp:1812339
* https://bugs.launchpad.net/kicad/+bug/1812339
When prompting for a new footprint library, we need to treat the input
as a file for creation rather than a directory for selection.
Otherwise, users cannot specify the name of their new footprint library
independently of the existing directory names.
Fixes: lp:1812135
* https://bugs.launchpad.net/kicad/+bug/1812135
Factor out common dialog code from global symbol library table dialog for
loading initial library table.
Update global symbol library table code to user factored out common dialog
code.
NEW: By default a clipboard is pasted to a grid starting from the
cursor position and doesn't matter is a selection of cells present or
not. Often a grid represents the data of a few similar objects like
components, for example. Some number of cells (fields) may have the same
value for a few rows (components). In this case, when filling data we
must copy the range of identical cells from the first row of similar
components and then paste it to every row of the rest components (by
default). From now it may be done easier. We must copy the range of
identical cells from first row of similar components (here is no
changes) and then select rectangular range of cells (for multiple rows)
where must be placed copied data. After pasting copied cells will be
pasted to every selected row.
So in general, we can copy cells from one row and paste it to multiple
rows at a time.
This new feature also makes possible to copy value from one cell and to
paste it to all from the selection.
If copied range of cells is larger than the selection then only the part
of clipboard that matches the selection will be pasted.
CHANGED: By default dialog closes on Esc key immediately and if dialog
has a grid control there is no way to close a cell editor with canceling
changes. New behavior is next: if dialog has a grid and the grid has an
active cell editor Esc key closes cell editor, otherwise Esc key closes
the dialog.
CHANGED: On pasting multiple rows from a clipboard to the end of a
grid, the grid is automatically expanding (appended needed number of
rows). In general case the grid expanding on pasting is inappropriate.
Rows must be added by tools like a button or a menu command etc. In some
cases rows cannot be added at all. So we must paste only the part of
the clipboard that fits between the cursor position and the end of the
grid without a grid extending.
CHANGED: First click sets a cursor to the specified cell, second click
activates editor (current realization, where first click activates cell
editor, is very buggy especially with cells selection).
Set cursor on cell of reference on mouse left click in Fields editor of
Eeschema.
When removing steiner points, there is the possibility that the test
point is also removed. In this case, it is no longer a member of the
linked list and will break the output.
The test for re-fracturing a broken polygon can also result in multiple
polygons, rather than only 0 or 1. Skipping the extra polygons will
result in a limited tesselation.
Fixes: lp:1812393
* https://bugs.launchpad.net/kicad/+bug/1812393
The config was saving a canvas type EDA_DRAW_FRAME member not always accurately initialized.
And the last canvas opened frame setup was saved, not necessary a frame having a canvas type that can be set by user.
This is a broken feature especially because the footprint viewer has a fixed canvas setting.
The canvas type might change without the frame being notified. If this
happens, the user is presented with repeated notifications of OpenGL
issues. Howver, switching canvas is not an error and should be
presented to the user as an info message to clarify that the system is
still working but it has changed how it renders the screen.
Fixes: lp:1795240
* https://bugs.launchpad.net/kicad/+bug/1795240
Misuse of __WXWINDOWS__ for checking the presence of Windows. The correct
macro is __WINDOWS__ or __WXMSW__ in GUI programs.
__WXWINDOWS__ is always set, on all platforms.
Use the AddFileExtListToFilter() to also generate the
wildcard for "all files". This is because:
* Users can use AddFileExtListToFilter for the all files WC
with the same interface as for any other extensions.
* Users do not need to worry about wxGetTranslation, as the
_() is applied in the same way as the other *Wildcard() helpers,
and it is a function just like the others, so it is consistent
* There is a testable interface to document the expected result.
The test is added.
Varargs make it very hard to pass strings in flexibly
when they (and the number of them) are not known
at compile time.
For example, this allows up to now amalgamate the "single
ext" and "multiple ext" unit tests.
The application warps the cursor when initiating some actions (dragging,
selecting modules or Find and Move). This warping should not also
trigger the autopan action.
Fixes: lp:1810787
* https://bugs.launchpad.net/kicad/+bug/1810787
The standard DIM() macro was not typesafe as it happily deferred errors
to runtime that can be caught at compile time. Replacing it with a
generic C++11 constexpr allows for typecasting, comparison and compile
time error checking.
If you use add_custom_command to generate the grammar file,
it can be removed by "make clean". This then means the user will
need to get it back from Git, or regenerate it with Lemon.
Changing to add_custom_command removes the output file
from the clean list. The incantation to rebuild the grammar
remains the same: "make libeval_grammar", and it is still not
required to have lemon installed for a normal build.
Fixes: lp:1809610
* https://bugs.launchpad.net/kicad/+bug/1809610
When at small zoom levels, the integer bbox can overflow, preventing
redraw. We fix this by redrawing the full tree when this happens
Fixes: lp:1733067
* https://bugs.launchpad.net/kicad/+bug/1733067
Bitmaps loaded via wx can contain alpha channels. We utilize underlying
routines to correctly map the alpha. This also standardizes the Cairo
alpha calls to ensure correct display in Fallback for partially
transparent highlights
Fixes: lp:1809845
* https://bugs.launchpad.net/kicad/+bug/1809845
Cairo supports antialiasing when rendering but can be slow when set to
sub-pixel mode. This bumps the minimum version of Cairo to 1.12
(available in 14.04 LTS as well as mingw) to support three antialias
settings (fast, good, best) that offer speed/appearance tradeoffs.
This can provide a higher-quality eeschema render as it works on a
per-element basis as opposed to the OpenGL per-screen antialias.
Currently, GAL is initialised to NONE (i.e. off). This causes
issues when Legacy canvas is broken (i.e. GTK3).
This changes the default to GAL Cairo, both in PCB_EDIT_FRAME
init, and in the config load.
Now, when the user starts with no config, they are prompted for
a choice: OpenGL or Cairo, and one of them will be set up, with
Cairo as fall back.
Users on platforms that still support legacy can go to it as normal
from the menu, but it will not be the default in any circumstance.
Fixes: lp:1809997
* https://bugs.launchpad.net/kicad/+bug/1809997
If a Scroll event is skipped, a default handler is fired by wxWidgets.
This default default handler fires 3 wxEVT_SCROLLWIN_LINEUP or wxEVT_SCROLLWIN_LINEDOWN events.
This is not wanted now in eeschema (and pcbnew) because they add extra (unwanted) scrolling.
Fixes: lp:1810403
https://bugs.launchpad.net/kicad/+bug/1810403
wxChoice centers the selection on GTK. So when switching from a
mid-list item to an item at the top, the list is always cut off for
choice lists located on the top toolbar. Using a combobox provides a
drop-down that allows easier access to all elements in the box.
Fixes: lp:1808569
* https://bugs.launchpad.net/kicad/+bug/1808569
It avoid including these extensions in a translatable string, thus avoid breaking filter
if the translation is incorrect (It happens sometimes).
See wildcards_and_files_ext.cpp for use.
If a page layout contains bitmaps and is used in all sheets of a hierarchy, and in the board editor,
the cross-probing from pcbnew to eeschema invalidate textures associated to these shared bitmaps,
when switching active sheets.
Usually a crash happens after switching or when closing editors.
As a workaround, I disabled bitmaps (therefore associated textures) cache.
Not optimal, but at least it avoid crashes.
The wrong class is called for the ctor of the wxConfigBase - this should
be a wxFileConfig, just like the bare new used to be.
Fixes: lp:1810002
* https://bugs.launchpad.net/kicad/+bug/1810002
This make the use of legacy canvas on GTK3 a default-off
advanced config. Legacy is substantially broken on GTK3
and is of basically no use at all to general users on this
platform.
If the program starts with legacy canvas in the config,
it is forced into a GAL mode, as otherwise it could happen
that the user is stuck and unable to get into pcbnew to change
the setting.
Fixes: lp:1803156
* https://bugs.launchpad.net/kicad/+bug/1803156
This can be used for "advanced" options which are for developers
to use for feature-flags and other configuration. Run time config
has some advantages over preprocessor defines:
* Can be changed without recompilation
* Sensitive to XDG_CONFIG_DIR, so flipping configs is easy
* Better compiler coverage (less conditionally compiled code means
less chance to break a different configuration). Also better
analysis coverage.
* Type safe config params
* Centralised documentation: it's in doxygen, in one place
No advanced config should be required by a general users. If a general
user does use one of these configs, it's probably because:
* There is a bug and one of these configs is a workaround
* A config in here is generally useful and should be moved into the
relevant application config and given UI.
For now, the config is read-only, and is read from the
"kicad_advanced" config file in the normal config dir.
The fracture() call may result in zero polygons remaining, which will
cause failure in our tesselation routine, so we need to check whether
this is a valid POLYGON before re-tesselating.
Tesselation can fail for a number of reasons. When this happens, we set
the triangulationValid flag to false to prevent using the broken
triangulation. This will fall back to the slow OpenGL triangulation
when DrawPolygon is called.
Use TesselatePolygon() to draw polygons in Gerbview instead of GLU tesselation, much slower.
Add helper methods in GAL to know if the current GAL engine is Cairo, OpenGL or something else,
useful to optimize drawing code.
Graphic lines and polygons are drawn to fit specific areas for which it
is helpful to have the endpoint controlled by the cursor even when
constraining the angle.
Fixes: lp:1805502
* https://bugs.launchpad.net/kicad/+bug/1805502
Append the appropriate file extension to the file name if the file name
does not have a file extension. This is a know issue with the GTK+ file
dialog.
Make the last 3D viewer screenshot last file used code more coherent.
Add the 3D viewer main frame trace string to the trace environment
variables doxygen group.
Doxygen comment and other minor code cleaning.
Fixes lp:1804980
https://bugs.launchpad.net/bugs/1804980
Under GTK3, the scrollbars fade in and out, causing a cascade of
re-paint events. These cause KiCad to be unresponsive while the repaint
events occur. By default this is 1s fade in 1s fade out but can be
configured by the user/wm.
Area mapping the repaint events to just scrollbar areas will be a good
solution but until/unless that happens the scrollbars in GTK3 are
problematic.
On GTK+3, the zoom events are smaller and faster, so
the trigger the zoom acceleration.
A simple fix is to use the non-accelerated Mac-style
zooming and an appropriate constant. This can be tweaked
further as needed.
Fixes: lp:1786515
* https://bugs.launchpad.net/kicad/+bug/1786515
GTK3 smooth scrolling is enabled by wxWidgets but not to the exclusion
of normal scroll up/down events. wxWidgets maps these both to the same
scroll handler and will fire them both if they are not handled before
being queued. Testing timestamps allows us to mark and ignore the
dupes.
This is set to GTK3 only for now as it isn't listed as a problem for
other platforms. But it shouldn't cause issues if it is enabled
elsewhere in the future.
The libeval grammar can now be rebuilt with "make libeval_grammar".
This is only possible when lemon is installed.
Also a couple of modifications to the lemon grammar to
account for external changes since the grammer was last generated.
Also move the grammar defines into grammar.h - this is how
Lemon produces them, and by manually copying into the target .cpp,
it make automated regeneration impossible.
This adds a check for contiguous board outlines to the DRC. It also
uses the calculated outline to ensure that traces are not crossing the
outlines.
Fixes: lp:1648055
* https://bugs.launchpad.net/kicad/+bug/1648055
The reduces a little bit of WX dependency, and makes
the timing code a bit more type-safe.
Also adds a more testable interface for the accelerated
zoom controller.
This is done to avoid a big chunk of conditionally-compiled code
in the middle of the event function.
Also separates the zoom logic from the WX_VIEW_CONTROLS object
and isolates it in a separate class behind a clearer interface.
Add some simple tests for sane steps on GTK+3-sized scroll
steps.
This syncs the "All" checkbox with the state of the report options such
that selecting "All" automatically selects the other boxes and
deselecting a box results in the "All" box also being unselected. This
allows a single click filtering of report messages.
Fixes: lp:1796992
* https://bugs.launchpad.net/kicad/+bug/1796992
When the error switching to OpenGL is triggered by the requested switch,
we want to fallback to the cairo GAL renderer instead of the
GAL_TYPE_NONE, which defaults to legacy.
Fixes: lp:1799017
* https://bugs.launchpad.net/kicad/+bug/1799017
This makes using Scrollbars more easy to use, especially for "small" page sizes like A or B.
Note also the working/drawing area size is bigger than the page size (3 times)
This parameter defines the working area (full page) size.
The fix is not perfect, because it does not take in account the page size.
However it is similar to the "old" initialization, before Eeschema GAL.
In Eeschema, a reasonable boundary size is used.
Due to recent changes in legacy canvas code, when starting a block command,
the block outline was not drawn in pcbnew and pl_editor during block definition.
Fixes: lp:1803668
https://bugs.launchpad.net/kicad/+bug/1803668
Factor out save current canvas view to image file code from symbol editor
code so it can be used anywhere.
Add ability to save to any image format supported by wxBitmapType. See
https://docs.wxwidgets.org/3.0/gdicmn_8h.html#a90a1eb6d85b5044a99b706fd979f27f5.
Currently only PNG output is implemented.
Please note that there is a minor bug that appears to be due to the
scroll bars which causes unfilled areas on the right and bottom edges
of the image. This always existed in the save symbol editor view
image but it was not as noticeable because by default the background
color is white. It is very noticeable in the footprint editor with
a black background.
The usual smattering of coding policy and comment fixes.
Fixes lp:1802127
https://bugs.launchpad.net/kicad/+bug/1802127
Due to the implicit floor of the cast from double to unsigned char,
there was a small rounding error in COLOUR4D's WX conversion function.
This fixes the failing tests.
Also make the cast to unsigned char explicit.
This avoids having to manually specify include/legacy_gal
in and legacy GAL targets, and harominizes with legacy_wx.
This also means .cpp files in common/legacy_gal do not
need to specify the legacy_gal subdirectory, so they
will continue to work as needed when legacy_wx is removed.
Display GALs had an incorrect world unit value set. Now the world unit
value says how many internal units are in an inch, in accord with the comments
in the GAL header. Bitmap drawing code relied on the information about DPI,
so scaling worked differently for display and print GALs.
CAIRO_PRINT_CTX provides a Cairo context created from wxPrintDC.
It allows one to prepare printouts using the Cairo library and
let wxWidgets handle the rest.
When reading (and writing) a file, we must switch the current locale to "C" for LC_NUMERIC.
Unfortunately, on Windows, a wxWidgets assert was shown when reading some items (bitmaps images).
This wxWidgets assert (related to decimal separator) is overzealous and is now hidden only when reading/writing files.
Fixes a crash when typing fast in the place footprint filter box.
Also adds a bunch more checking to GAL locking, including making
sure the same person unlocks as locked, and preventing piece-meal
calls (the RAII objects must be used).
The decision to include the TTL library make KiCad a derivative work
under the terms of the AGPL version 3 or later license.
Add both the GPL3 and AGPL3 license text files and add a readme file
about the KiCad licensing. Contributing to KiCad still falls under
the GPL3+ license.
Fixes lp:1797095
https://bugs.launchpad.net/kicad/+bug/1797095
It happens when the char is not found in the font used to display netnames/pad names.
When happens, a wxASSERT is raised.
Unfortunately it can crash the application if it is during a paint event or some critical time.
Linux does not handle the resize command with wide-character extended
table UTF-8. The solution did not work for W7-32bit. This is a
compromise, attempting first the preferred, previous solution and
falling back to the secondary solution.
(cherry picked from commit 6106210c87)
Replace all instances of wxLogDebug with wxLogTrace in the common and
kicad folders to prevent unwanted debugging output.
Add new trace flags for locale and screen object tracing.
The usual smattering of code policy fixes.
Invalid wchar characters would throw an exception. We need a defined
output from the += operator, even for unknown character.
Fixes: lp:1798144
* https://bugs.launchpad.net/kicad/+bug/1798144
(cherry picked from commit b37bc69476)
The connectivity files were unwieldy. This separates them logically
into data, algo and items where the items classes are those that hold,
surprise, surprise, the items, lists and clusters.
This prevents deadlocks when exceptions are thrown and the context
ends up not getting unlocked.
It also removes an earlier hack to try and minimize this which
didn't work anyway.
Dynamic casts should only be used when we explicitly check for the
resulting pointer to be NULL. Where we know the class is castable we
can use static_cast, save on overhead and ensure our resulting pointer
is non-null.
Block rotate and mirror now work like they do in Pcbnew (that is
they're treated as part of the block move/duplicate/whatever
rather than finishing it).
Fixes: lp:1780794
* https://bugs.launchpad.net/kicad/+bug/1780794
1) when duplicating don’t keep original hidden until end of drag
2) reset selectionArea when showing it so it doesn’t flash in its previous location
3) center a pasted block on the cursor
4) don’t draw the source selectionArea when pasting a block
5) implement selection-style highlighting for contents of blocks
6) add pasted items to view so they don’t disappear when the block is placed
Fixes: lp:1747197
* https://bugs.launchpad.net/kicad/+bug/1747197
Split antialiasing options out from display options. Move
antialiasing to common. Duplicate the rest of display options
for Eeschema.
Implement OnSelectGrid and hookup GAL canvas refresh to
SetPresetGrid.
Add Grid Settings... to View menu and move Show Grid from
preferences to View Menu to match Pcbnew.
5.0 doesn't set the GAL's line width. It gets away with this since
it's using the same GAL to measure as to set up the drawing, so
the width happens to be set correctly for other reasons. 5.1 uses
a separate GAL and so isn't so lucky.
Note: it's only the renderer that is changed from wxDC to GAL. Tools stay the same, consider this a temporary hack.
This commit splits the EDA_DRAW_FRAME, EDA_DRAW_PANEL and BLOCK_SELECTOR classes into two variants, each independently compiled into a static library.
- "legacy_wx" for PCBnew/Gerbview - wxDC-based legacy canvas. We have full GAL support there anyway so it makes no sense to introduce GAL rendering API to the legacy tools.
- "legacy_gal" for EEschema and the rest - GAL-based legacy canvas, using legacy tools but with a GAL renderer.
Such split ensures only a small part of the common library and eeschema is affected, without messing around with already GALified tools.
The commit also removes some header dependencies on class_drawpanel.h
It would appear that some platforms process the KILL_FOCUS event
after running TransferDataFromWindow(). This change makes sure
that the evaluation is done no matter the order.
Fixes: lp:1793911
* https://bugs.launchpad.net/kicad/+bug/1793911
LC_NUMERIC is the right option to use in LOCALE_IO because only the floating point separator must be modified
When using LC_ALL, the Env var expansion wxGetEnv() was not working when the env var contains non ascii7 codes after a call to LOCALE_IO.
When using setlocale( LC_NUMERIC, "C" ) in LOCALE_IO, wxGetEnv() works fine.
Fixes: lp:1795990
https://bugs.launchpad.net/kicad/+bug/1795990
The '/' and ':' are reserved and cannot be used in symbol or footprint
names. They will cause the LIB_ID parser and formatter to fail. While
it seems like they should be legal in symbol alias names, they will
trigger a symbol rescue the next time the schematic is loaded.
Use ID_SCH as in the Eagle schematic plugin rather than ID_ALIAS to
ensure symbol names do not need rescued the next time the schematic is
opened.
Remove ID_ALIAS since the rules for alias names are the same as the
rules for symbol names. Otherwise, allowing '/' and ':' in alias names
will force a symbol rescue on the next schematic load.
Fixes lp:1795600
https://bugs.launchpad.net/kicad/+bug/1795600
When querying the view, we do not want to including items that are not
on layers that are currently visible. This routine is currently only
used by the selection tool (pcbnew and gerbview) and the grid helper.
Both expected this logic but were indifferent to the additional items.
Fixes: lp:1796403
* https://bugs.launchpad.net/kicad/+bug/1796403
The guard isn't working on GTK (causing eval not to happen on
a kill focus), and I can't remember what issue I put it in to
solve. I've done a bunch of testing and it appears that we
don't need it, although I'm sure I put it in for something....
Fixes: lp:1793911
* https://bugs.launchpad.net/kicad/+bug/1793911
Patch modifies the way graphs are displayed: instead of drawing one
point for each X coordinate, there is a line segment joining min and max
values for continuous graphs and all unique points are displayed for
discrete graphs.
Fixes: lp:1674143
* https://bugs.launchpad.net/kicad/+bug/1674143
Graph rendering takes a lot of time, especially when there is a high number
of points to be drawn. The initial implementation drew all points/lines
even if the the coordinates were duplicates, in the new version duplicated
coordinates are skipped.
Fixes: lp:1674143
* https://bugs.launchpad.net/kicad/+bug/1674143
There are lot of places where constants are used in the KiCad UI
as "magic numbers". The most common one is "5", used in many
wxFormBuilder and manual UI constructions as the margin.
This commit provides a place for all UI to look up shared
constants and other functions, to help create a consistent UI using
functions that provide meaning and intent to these magic numbers.
This is in preparation for making this widget optionally read-only.
Major changes:
* Construct panel in code, not with wxFormBuilder. This make's it
easier to conditionally construct elements that won't be used
in a read-only mode (e.g. the buttons).
* Use a generic "button row panel" widget for the buttons, as the
sizing and layout logic is reusable in nearly all dialogs, and
it's simplifies layout in the higher-level dialog widget. This
widget is one example of many possible "reuable widgets".
Put the cursor and pan control TOOL_ACTIONs in ACTION,
and refer to them in that way.
The handlers are currently identical in Pcbnew and Cvpcb,
and Gerbview (and all canvases) can benefit from them as well
if they are in libcommon. Also saves duplicated code.
Fixes: lp:1795855
* https://bugs.launchpad.net/kicad/+bug/1795855
Adds Cut/Copy/Paste and Revert for footprints; introduces a new
shared Revert Changes? dialog; hooks up Add Library for footprints,
standardizes the Save As terminology.
This puts generic logic for KiCad environment vars in
one place.
Also updates the DIALOG_CONFIGURE_PATHS help to document
the new KICAD_USER_TEMPLATE_DIR and KICAD_TEMPLATE_DIR.
This version makes use of lots of things learned going down the
other rat hole. Avoiding the wxComboFocusHandler is key, as well
as specifying using the AltPopupWindow.
The key handler is still tricky with respect to those platforms
that use native controls, but the starting-key strategy is similar
to the one used with wxGrid text editors.
Happens only in Opengl mode.
So enforce controls in 3 group function: DrawGroup, ChangeGroupColor, ChangeGroupDepth.
Fixes: lp:1795044
https://bugs.launchpad.net/kicad/+bug/1795044
This is caused by:
* Not checking the hotkey data is not null when performing a
hotkey action
* Allowing hotkey actions on non-hotkey rows.
This fixes both of these, and adds an assert to warn if someone
does manage to fire a hotkey action on a non-hotkey row (but it
won't crash).
Fixes: lp:1794756
* https://bugs.launchpad.net/kicad/+bug/1794756
It was possible to get conflicting hotkeys when undoing and resetting hotkeys
to defaults.
This uses the same logic as when setting hotkeys to avoid conflcits in these
other two cases.
Fixes: lp:1794730
* https://bugs.launchpad.net/kicad/+bug/1794730
This separates the "ground truth" store of hotkeys from what is shown
in the dialog. This will allow us to filter the displayed hotkeys
while keeping the same underlying data structures.
Now, the UI data items interact with an intermediate set of data, which
represents the "original" hotkey data, and the "changed" data. The
ultimate aim here is to allow UI elements to come and go, but the
hotkeys that are "in-edit" are preserved.
This also allows us to abstract some bookkeeping complexity
out of the WIDGET_HOTKEY_LIST class into a separate non-GUI
class.
GTK uses a level of cooperative multitasking when dealing with
secondary event loops. This gives the wm enough leeway to process the
redraw before returning to the secondary loop
This commit finishes the removal of OpenMP from the KiCad codebase.
Removed in this commit are the OpenMP calls in 3d-viewer and
qa/polygon_triangulation as well as all references in CMakeLists.txt
std::thread is used instead for multithreaded computation
wxString constructor will determine string length using strlen() when it
is not explicitly specified, but there is no termination byte added when
reading file contents to 'buffer' variable.
Commit 73c229714 was a bit of a sledgehammer for the associated problem
of degenerate points. This commit replaces that one by only performing
additional simplification of the zone polygons on those polygons that
fail our initial triangulation attempt.
Add Display Settings to Footprint Browser.
Make each of them OpenGL on OSX and Cairo on other platforms.
Allow auto-zoom to be turned off and save last zoom setting.
Make ordering of tools in htoolbar consistent.
Standardize grid and zoom drop-downs.
Fixes: lp:1791667
* https://bugs.launchpad.net/kicad/+bug/1791667
Modal yes/no questions should not be allowed to fall behind other
windows. They need to be answered before the program continues and
clicking outside of the dialog should not hide dialog itself.
Fixes: lp:1790640
* https://bugs.launchpad.net/kicad/+bug/1790640
It creates a lot of integer overflow in Pcbnew in Debug mode (Legacy mode), although it ha meaning onlt for the Page Layout Editor.
This function should be deprecated when the GAL canvas is used in Page Layout Editor.
Calls the simplify/fracture polygon code on any polygon prior to
tesselation. This avoids issues with degenerate polygons where the
degenerate points are not sequential.
Fixes: lp:1790534
* https://bugs.launchpad.net/kicad/+bug/1790534
Replaces Poly2Tri with updated code to process polygons faster and more
robustly. Notably, we can now handle overlapping holes in the polygons,
allowing us to cache the triangulation of complex boards
Using Title + Message wasn't working for all the dialogs which
did substitutions in the message (which was a lot of them).
Fixes: lp:1789348
* https://bugs.launchpad.net/kicad/+bug/1789348
Also fixes a bug where nets wouldn't get changed because the
pads weren't changed and so the pad nets would propagate and
wipe out the changed nets on the tracks.
Also includes warning dialogs that pad nets will be changed if the
track nets are.
Fixes: lp:1779854
* https://bugs.launchpad.net/kicad/+bug/1779854
Use standard Magnetize() to handle grid and magnetic pads.
Use the standard menu from PCB_TOOL. Delegating the menu to
the SELECTION_TOOL just caused grief.
Also brings clients (such as Position Relative To) into line,
and implements better Cancel behaviour.
Also improves visibility of modal status messages:
- moves Select Anchor message from status bar to popup
- moves Select Reference message from dialog to popup
Fixes: lp:1786727
* https://bugs.launchpad.net/kicad/+bug/1786727
Also updates the file menu IDs so that we can actually handle
more than 9 items in the file history.
Also adds configurable file history length to the other gerber
files (zip, drill and job).
Fixes: lp:1745729
* https://bugs.launchpad.net/kicad/+bug/1745729
Use the wxWidgets official accelerator key string for WXK_BACK (this is "Back") in menuitems instead of "BkSp"
Also when reading the hotkey config file, avoid to set a hotkey to unassigned when its name is not found in list.
The default value is used.
Unassigned hotkey use <unassigned> as key name (and 0 as key code) in file.
Primary change is to replace most control/window borders with
AUI pane borders. We implement our own AUI border drawing
routine which avoids the ugly one-pixel white frames around
dark canvasses.
Also increases the signal-to-noise ratio of all the pane
creation code in the various frames.
Don't process zoom both in Legacy code and Modern code; one of
them will decide the zoom has already changed and do odd things.
Make sure the view is updated after zooming, otherwise you have
to move the mouse over the canvas before seeing the new zoom.
On Linux (GTK?) the accelerator key BkSp, when used in menus must be coded as "\t\b" and not "\tBkSp".
However, On Windows, it must be "\tBkSp".
Joys of multi-platform development.
This reverts the previous work-around 7d62f14dd for the RTree splitting
degeneracy that was placed prior to v5. It appears not to have worked
for all systems. In its place, we use doubles instead of floats to
calculate the bounding box when filling the RTree. This keeps maximum
volume items from overlapping with the system boundary in test cases.
Be more intelligent about sorting lib tree items. (Footprint
entries, for instance, come out of an already-sorted list.)
Don't recreate menus twice when laoding Footprint Editor.
More pervasive use of WX_FILENAME to avoid expensive calls to
wxFileName::SplitPath() and string concatenation.
For POSIX kernels do all the work on the file-system side so we
don't have to keep converting back and forth between encodings.
Cache the footprint info on disk (in the project).
Move timestamp-generation (and checking) to the filesystem so the
above will be bullet-proof.
Rewrite some wxWidgets classes for performance (see common.h).
Drop all uses of wxRAISED_BORDER and wxSUNKEN_BORDER from dialogs and
panels used in main frame windows.
Drop use of wxSP_3DSASH options on all wxSplitterWindow definitions.
Minor dialog alignment and spacing fixes.
This also fixes a bunch of bugs where an error during save would
still close the window (rather than cancelling the close action).
Fixes: lp:1785034
* https://bugs.launchpad.net/kicad/+bug/1785034
Put the buttons in platform-compliant order.
Get rid of SaveMultiOptions in favour of repeated standard save
dialogs with a "Apply to all" checkbox.
Fixes: lp:1783444
* https://bugs.launchpad.net/kicad/+bug/1783444
Eagle allows for variants of components to be listed in the schematic.
This patch copies the variant data into the imported schematic item,
prefixing the alternate variant names with "VARIANT_" and keeping the
alternate values.
There's no point in having both Save Symbol and Save Library when
only one can be selected at a time.
Also cleans up a bunch of extraneous icons, and fixes a few
copy/paste errors in menus and toolbars.
* in DIALOG_EDIT_LIBRARY_TABLES::TransferDataFromWindow(), m_contentPanel->TransferDataFromWindow
* is explicitly called to update library tables.
* Before wxWidgets 3.1.x, m_contentPanel->TransferDataFromWindow is not called by wxDialog::TransferDataFromWindow()
* and explicit call is needed.
* Since wxWidgets 3.1.x, m_contentPanel->TransferDataFromWindow is called by wxDialog::TransferDataFromWindow()
* thus creating two successive calls, not supported by m_contentPanel->TransferDataFromWindow.
* The call to wxDialog::TransferDataFromWindow() was just removed, as it is useless in this dialog
This removes the existing constructors so that all parsing must
be explicit and callers are made aware that they need to think
about illegal characters, malformed ids, etc.
Fixes: lp:1783474
* https://bugs.launchpad.net/kicad/+bug/1783474
Also brings horizontal toolbar in line with Pcbnew and Eeschema.
And updates the EDA_LIST_DIALOG to current practices.
This finishes the removal of the active library concept from the
Symbol Editor (started with the new component tree in 5.0).
Fixes: lp:1740717
* https://bugs.launchpad.net/kicad/+bug/1740717
wxDialog calls Show(false) when the dialog is about to be closed, but
KIDIALOG::Show() implementation did not forward the show parameter to
wxRichMessageDialog::Show() invocation. As the parameter was not
specified, the mentioned Show() call always used 'true' as the default
parameter, preventing the dialog from being closed.
Fixes: lp:1782999
* https://bugs.launchpad.net/kicad/+bug/1782999
Don't beep when inserting character from focused grid cell (but
before editor is opened).
Handle reference validation separately from name validation and
separately from user field value validation. The old way of setting
the fieldId on the validator wasn't working because the validator
gets copied.
Run validation when leaving cell. Don't just check for empty
(particularly for fields that CAN be empty).
Fixes: lp:1782917
* https://bugs.launchpad.net/kicad/+bug/1782917
(cherry picked from commit 79e04de)
This allows it to participate in Kiway things such as updating
language or common settings.
Fixes: lp:1779558
* https://bugs.launchpad.net/kicad/+bug/1779558
(cherry picked from commit b3f8478)
... and GetMsgPanelInfo.
Step 4 in the g_UserUnit eradication effort.
Also removes a couple of conversion routines that were close
enough to extinction.
(cherry picked from commit c75da51)
Work around wxWidgets failure to send first key through validator.
Unify treatment of INDETERMINATE values (such as for multiple
selections with mixed values).
(cherry picked from commit 7308729)
Allow copy of a single cell demarcated by the grid cursor.
Paste of lib_table s-expressions should always start at 0,0.
Let caller or specialized sub-class do auto-sizing; don’t
do it from within the base GRID_TRICKS.
Don’t start GRID_TRICKS menu IDs at -1; wxWidgets doesn’t
like it when you get to 0.
Add column visibility menu.
(cherry picked from commit e5071ed)
It's time to fix the focus issues. This adds a new SetInitialFocus()
routine to DIALOG_SHIM which will need to be called from a lot of
dialogs.
(cherry picked from commit 6d9647a)
The general idea is to support user-units inheritance. The
UNIT_BINDER allows wrapped controls to inherit units from their
parent dialog, while KEYWAY_HOLDER and DIALOG_SHIM allow child
KEYWAY_HOLDERs or DIALOG_SHIMs to inherit units from their
parent.
The GetUserUnits() method signature has to move to KEYWAY_HOLDER
rather than KEYWAY_PLAYER (where it makes more sense) as it’s the
only common ancestor of KEYWAY_PLAYER and DIALOG_SHIM.
As long as we'll be using the UNIT_BINDER more widely, it also
makes sense to move evaluation and validation into it.
This commit also provides eeschema’s DIALOG_LABEL_EDITOR and
pcbnew’s DIALOG_TRACK_VIA_PROPERTIES and DIALOG_SET_GRID as
models of how to use the new user-units inheritance, eval, and
validation.
Fixes: lp:593795
* https://bugs.launchpad.net/kicad/+bug/593795
(cherry picked from commit c8bc53e)
Step 1 of the g_UserUnit global eradication. This commit includes
basic hookup of hotkeys, units tool-buttons and grid dialogs.
(cherry picked from commit e0500ab)
The old item pointers (which aren't safe to keep around) were
removed in favour of opaque references (void*) which are then
compared against existing items when needed.
Also improves brightening by brightening the whole footprint
(ie: its pads, drawings, reference and value) rather than just
its target cross.
(cherry picked from commit 30e90b0)
Small icons for dialog browse, refresh, and row operations.
Icons in B&W so they don't over-emphasize with respect to other
controls in the dialog.
Layout cleanup for consistency. Removal of the blank space to
left of the fields list in the Global Fields Editor, and addition
of column-sizing-to-list-width.
More even spacing for buttons in html report panel.
Honor platform conventions for action button order and layout.
Move netlist importer to update-pcb-from-schematic algorithm
(display messages and then update instead of "dry run" checkbox)
(cherry picked from commit b21e19d)
Hotkey options have shifted some options from context-specific to global
hotkeys. This causes conflicts with old hotkey definitions. Instead,
we keep the v5 eeschema/pcbnew hotkeys completely separate. Users can
still import their custom hotkey files from v4.
Fixes: lp:1778408
* https://bugs.launchpad.net/kicad/+bug/1778408
When staging a commit for an object that has already been modified,
there is a Clone() made for the hypothetical entry. We need to free it
if we are not storing a new entry.
Jon Evans
Ian McInerney
Jeff Young
Ben Dooks
Seth Hillbrand
jean-pierre charras
Marek Roszko
Michael Kavanagh
Wayne Stambaugh
Roberto Fernandez Bautista
RigoLigoRLC
qu1ck
Dominik Wernberger
Simon Richter
Oleg Endo
Thomas Pointhuber
PJM
Tomasz Wlostowski
Mikolaj Wielgus
Mario Luzeiro
Fabien Corona
Reece R. Pollack
Qbort
Joshua Redstone
bjpiccioni
Peter Montgomery
mntmn
Ben Ellis
Urja Rannikko
Maciej Suminski
Johannes Pfister
Stefan
emC5RgViIK
Oleg Endo
Marcus Comstedt
Andrew Downing
Drew Fustini
Alexander Shuklin
Alexander Stock
Jonatan Liljedahl
Seth Hillbrand
Konstantin Baranovskiy
Jakub Kozdon
Ian McInerney
Ian McInerney
Simon Schubert
Shawn Anastasio
Stefan Hamminga
Thomas Figueroa
Steven A. Falco
John Beard
Adrian Scripca
Jean-Samuel Reynaud
Jiaxun Yang
Fabián Inostroza
Ronnie Gaensli
Hal Gentz
Fabio Rossi
Alexey Chernov
Oliver
Andrew Zonenberg
José Jorge Enríquez
Mark van Doesburg
Carsten Schoenert
Martin Aberg